ALTEON-TS-BWM-MIB

All MIBs › ALTEON-TS-BWM-MIB

Category: Vendor: Alteon

Description: Alteon TS switch bandwidth management MIB for traffic shaping and bandwidth policy configuration on TS platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALTEON-TS-BWM-MIB?

This is an Alteon (later Nortel/Radware) Traffic Shaping (TS) series switch MIB for bandwidth management, controlling and monitoring traffic-shaping and QoS bandwidth policies. It exposes configuration objects split into current (active) and new (pending) configuration generations for global bandwidth-management settings and per-policy tables, including policy enforcement state, ToS/DSCP marking rules, and SMTP-related notification settings. Its primary use is configuration/policy management rather than hardware health, though the current-vs-new generation state objects (bwmCurCfgGenState/bwmNewCfgGenState) let an admin monitor whether a pending configuration change has actually been applied, functioning as a software-configuration status check. It is a self-contained Alteon enterprise MIB without notable dependence on external standard MIBs. It's typically deployed on Alteon TS-series application-traffic-management switches where bandwidth-shaping policies enforce per-application or per-class traffic limits. Engineers can download the ALTEON-TS-BWM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALTEON-TS-BWM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alteon TS-series traffic-shaping switches

Monitoring Examples

An administrator would compare bwmCurCfgGenState against bwmNewCfgGenState to verify that a staged bandwidth-management policy change has been committed. Polling bwmCurCfgPolicyTable/bwmCurCfgPolicyTableEntry by bwmCurCfgPolicyIndx shows each policy's ToS-in/ToS-out marking (bwmCurCfgPolicyTosIn, bwmCurCfgPolicyTosOut) and enforcement flag (bwmCurCfgGenEnforcePolicy). If bwmPolicyTableMaxEnt is reached, new bandwidth policies cannot be added, which would explain a failed policy provisioning attempt.

What Can Be Monitored

bandwidth policy enforcement state
pending vs active configuration generation
per-policy ToS/DSCP marking
policy table capacity
SMTP notification user settings

Imported Objects

From ALTEON-ROOT-MIB

switch

OBJECT-IDENTITY

From ALTEON-TIGON-SWITCH-MIB

information	OBJECT-IDENTITY
operCmds	OBJECT-IDENTITY
stats	OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
bwm	1.3.6.1.4.1.1872.2.1.17
bwmContractConfig	1.3.6.1.4.1.1872.2.1.17.3
INT bwmContractTableMaxEnt	1.3.6.1.4.1.1872.2.1.17.3.1	INTEGER	read-only	The maximum number of rows in the BWM contract configuration table.
INT bwmCurCfgContractHistory	1.3.6.1.4.1.1872.2.1.17.3.2.1.7	INTEGER	read-only	Enable/disable save contract statistics on the TFTP server of the traffic contract.
INT bwmCurCfgContractIndx	1.3.6.1.4.1.1872.2.1.17.3.2.1.1	INTEGER	read-only	The index of the row in BWM traffic contract configurations table.
STR bwmCurCfgContractName	1.3.6.1.4.1.1872.2.1.17.3.2.1.2	DisplayString	read-only	The traffic contract name.
INT bwmCurCfgContractPolicy	1.3.6.1.4.1.1872.2.1.17.3.2.1.4	INTEGER	read-only	This is policy number of the traffic contract
INT bwmCurCfgContractPrec	1.3.6.1.4.1.1872.2.1.17.3.2.1.5	INTEGER	read-only	The precedence value of the traffic contract
INT bwmCurCfgContractState	1.3.6.1.4.1.1872.2.1.17.3.2.1.3	INTEGER	read-only	This is the state of the traffic contract.
bwmCurCfgContractTable	1.3.6.1.4.1.1872.2.1.17.3.2		not-accessible	The table of BWM traffic contract configuration.
bwmCurCfgContractTableEntry	1.3.6.1.4.1.1872.2.1.17.3.2.1		not-accessible	A row in the BWM traffic contract configuration table.
INT bwmCurCfgContractUseTos	1.3.6.1.4.1.1872.2.1.17.3.2.1.6	INTEGER	read-only	Enable/disable the TOS overwrite of the traffic contract.
INT bwmCurCfgGenEnforcePolicy	1.3.6.1.4.1.1872.2.1.17.1.3	INTEGER	read-only	The state of BWM enforce policy in the current configuration block.
STR bwmCurCfgGenSmtpUser	1.3.6.1.4.1.1872.2.1.17.1.5	DisplayString	read-only	The SMTP user name for BWM in the current configuration block.
INT bwmCurCfgGenState	1.3.6.1.4.1.1872.2.1.17.1.1	INTEGER	read-only	The state of BWM in the current configuration block.
INT bwmCurCfgPolicyBuffer	1.3.6.1.4.1.1872.2.1.17.2.2.1.7	INTEGER	read-only	The buffer limit for the traffic policy.
STR bwmCurCfgPolicyHard	1.3.6.1.4.1.1872.2.1.17.2.2.1.4	DisplayString	read-only	The hard speed limit for the traffic policy.
INT bwmCurCfgPolicyIndx	1.3.6.1.4.1.1872.2.1.17.2.2.1.1	INTEGER	read-only	The index of the row in BWM traffic policy configurations table.
STR bwmCurCfgPolicyResv	1.3.6.1.4.1.1872.2.1.17.2.2.1.6	DisplayString	read-only	The reservation speed limit for the traffic policy.
STR bwmCurCfgPolicySoft	1.3.6.1.4.1.1872.2.1.17.2.2.1.5	DisplayString	read-only	The soft speed limit for the traffic policy.
bwmCurCfgPolicyTable	1.3.6.1.4.1.1872.2.1.17.2.2		not-accessible	The table of BWM traffic policy configuration.
bwmCurCfgPolicyTableEntry	1.3.6.1.4.1.1872.2.1.17.2.2.1		not-accessible	A row in the BWM traffic policy configuration table.
INT bwmCurCfgPolicyTosIn	1.3.6.1.4.1.1872.2.1.17.2.2.1.2	INTEGER	read-only	This is IP TOS in the profile state of the traffic policy
INT bwmCurCfgPolicyTosOut	1.3.6.1.4.1.1872.2.1.17.2.2.1.3	INTEGER	read-only	This is IP TOS out of profile state of the traffic policy
bwmGeneralConfig	1.3.6.1.4.1.1872.2.1.17.1
INT bwmNewCfgContractDelete	1.3.6.1.4.1.1872.2.1.17.3.3.1.5	INTEGER	read-write	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
INT bwmNewCfgContractHistory	1.3.6.1.4.1.1872.2.1.17.3.3.1.8	INTEGER	read-write	Enable/disable save contract statistics on the TFTP server of the traffic contract.
INT bwmNewCfgContractIndx	1.3.6.1.4.1.1872.2.1.17.3.3.1.1	INTEGER	read-only	The index of the row in BWM traffic contract configuration table.
STR bwmNewCfgContractName	1.3.6.1.4.1.1872.2.1.17.3.3.1.2	DisplayString	read-write	The traffic contract name.
INT bwmNewCfgContractPolicy	1.3.6.1.4.1.1872.2.1.17.3.3.1.4	INTEGER	read-write	This is policy number of the traffic contract
INT bwmNewCfgContractPrec	1.3.6.1.4.1.1872.2.1.17.3.3.1.6	INTEGER	read-write	The precedence value of the traffic contract
INT bwmNewCfgContractState	1.3.6.1.4.1.1872.2.1.17.3.3.1.3	INTEGER	read-write	This is the state of the traffic contract.
bwmNewCfgContractTable	1.3.6.1.4.1.1872.2.1.17.3.3		not-accessible	The table of BWM traffic contract configuration.
bwmNewCfgContractTableEntry	1.3.6.1.4.1.1872.2.1.17.3.3.1		not-accessible	A row in the BWM traffic contract configuration table.
INT bwmNewCfgContractUseTos	1.3.6.1.4.1.1872.2.1.17.3.3.1.7	INTEGER	read-write	Enable/disable the TOS overwrite of the traffic contract.
INT bwmNewCfgGenEnforcePolicy	1.3.6.1.4.1.1872.2.1.17.1.4	INTEGER	read-write	The state of BWM enforce policy in the new configuration block.
STR bwmNewCfgGenSmtpUser	1.3.6.1.4.1.1872.2.1.17.1.6	DisplayString	read-write	The SMTP user name for BWM in the new configuration block.
INT bwmNewCfgGenState	1.3.6.1.4.1.1872.2.1.17.1.2	INTEGER	read-write	The state of BWM in the new configuration block.
INT bwmNewCfgPolicyBuffer	1.3.6.1.4.1.1872.2.1.17.2.3.1.7	INTEGER	read-write	The buffer limit for the traffic policy.
INT bwmNewCfgPolicyDelete	1.3.6.1.4.1.1872.2.1.17.2.3.1.8	INTEGER	read-write	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
STR bwmNewCfgPolicyHard	1.3.6.1.4.1.1872.2.1.17.2.3.1.4	DisplayString	read-write	The hard speed limit for the traffic policy.
INT bwmNewCfgPolicyIndx	1.3.6.1.4.1.1872.2.1.17.2.3.1.1	INTEGER	read-only	The index of the row in BWM traffic policy configurations table.
STR bwmNewCfgPolicyResv	1.3.6.1.4.1.1872.2.1.17.2.3.1.6	DisplayString	read-write	The reservation speed limit for the traffic policy.
STR bwmNewCfgPolicySoft	1.3.6.1.4.1.1872.2.1.17.2.3.1.5	DisplayString	read-write	The soft speed limit for the traffic policy.
bwmNewCfgPolicyTable	1.3.6.1.4.1.1872.2.1.17.2.3		not-accessible	The table of BWM traffi policy configuration.
bwmNewCfgPolicyTableEntry	1.3.6.1.4.1.1872.2.1.17.2.3.1		not-accessible	A row in the BWM traffic policy configuration table.
INT bwmNewCfgPolicyTosIn	1.3.6.1.4.1.1872.2.1.17.2.3.1.2	INTEGER	read-write	This is IP TOS in the profile state of the traffic policy
INT bwmNewCfgPolicyTosOut	1.3.6.1.4.1.1872.2.1.17.2.3.1.3	INTEGER	read-write	This is IP TOS out of profile state of the traffic policy
bwmOper	1.3.6.1.4.1.1872.2.1.14.2
INT bwmOperSendSMTP	1.3.6.1.4.1.1872.2.1.14.2.1	INTEGER	read-write	This is an action object to send BWM history to SMTP server. other(1) is returned when read.
bwmPolicyConfig	1.3.6.1.4.1.1872.2.1.17.2
INT bwmPolicyTableMaxEnt	1.3.6.1.4.1.1872.2.1.17.2.1	INTEGER	read-only	The maximum number of rows in the BWM policy configuration table.
bwmStats	1.3.6.1.4.1.1872.2.1.8.15
CTR bwmStatSpTcBufferMax	1.3.6.1.4.1.1872.2.1.8.15.3.1.7	Counter	read-only	The total number of buffers assigned to the traffic contract queue.
CTR bwmStatSpTcBufferUsed	1.3.6.1.4.1.1872.2.1.8.15.3.1.6	Counter	read-only	The total number of buffers used by the traffic contract queue.
INT bwmStatSpTcContractIndex	1.3.6.1.4.1.1872.2.1.8.15.3.1.2	INTEGER	read-only	The contract queue number for which the statistics apply.
bwmStatSpTcEntry	1.3.6.1.4.1.1872.2.1.8.15.3.1		not-accessible	A row in the BWM SP traffic contract table.
STR bwmStatSpTcName	1.3.6.1.4.1.1872.2.1.8.15.3.1.3	DisplayString	read-only	The name of the traffic contract queue.
CTR bwmStatSpTcOutdisoct	1.3.6.1.4.1.1872.2.1.8.15.3.1.5	Counter	read-only	The total number of octets dropped from the traffic contract queue.
CTR bwmStatSpTcOutoct	1.3.6.1.4.1.1872.2.1.8.15.3.1.4	Counter	read-only	The total number of octets sent out from the traffic contract queue.
INT bwmStatSpTcPortIndex	1.3.6.1.4.1.1872.2.1.8.15.3.1.1	INTEGER	read-only	The Switch Port number for which the statistics apply.
CTR bwmStatSpTcrBufferMax	1.3.6.1.4.1.1872.2.1.8.15.4.1.8	Counter	read-only	The total number of buffers assigned to the traffic contract queue.
CTR bwmStatSpTcrBufferUsed	1.3.6.1.4.1.1872.2.1.8.15.4.1.7	Counter	read-only	The total number of buffers used by the traffic contract queue.
INT bwmStatSpTcrContractIndex	1.3.6.1.4.1.1872.2.1.8.15.4.1.2	INTEGER	read-only	The contract queue number for which the statistics apply.
bwmStatSpTcrEntry	1.3.6.1.4.1.1872.2.1.8.15.4.1		not-accessible	A row in the BWM traffic contract rate table.
STR bwmStatSpTcrName	1.3.6.1.4.1.1872.2.1.8.15.4.1.3	DisplayString	read-only	The name of the traffic contract queue.
CTR bwmStatSpTcrOutdisoct	1.3.6.1.4.1.1872.2.1.8.15.4.1.6	Counter	read-only	The total number of octets dropped from the traffic contract queue.
CTR bwmStatSpTcrOutoct	1.3.6.1.4.1.1872.2.1.8.15.4.1.5	Counter	read-only	The of octets sent out from the traffic contract queue.
INT bwmStatSpTcrPortIndex	1.3.6.1.4.1.1872.2.1.8.15.4.1.1	INTEGER	read-only	The switch port number for which the statistics apply.
INT bwmStatSpTcrRate	1.3.6.1.4.1.1872.2.1.8.15.4.1.4	INTEGER	read-only	The rate of octets sent out from the traffic contract queue.
bwmStatSpTcrTable	1.3.6.1.4.1.1872.2.1.8.15.4		not-accessible	The table of Bandwidth Management Switch Port Traffic Contract Rate statistics.
bwmStatSpTcTable	1.3.6.1.4.1.1872.2.1.8.15.3		not-accessible	The table of BWM Switch Port Traffic Contract statistics.
CTR bwmStatTcBufferMax	1.3.6.1.4.1.1872.2.1.8.15.1.1.6	Counter	read-only	The total number of buffers assigned to the traffic contract queue.
CTR bwmStatTcBufferUsed	1.3.6.1.4.1.1872.2.1.8.15.1.1.5	Counter	read-only	The total number of buffers used by the traffic contract queue.
INT bwmStatTcContractIndex	1.3.6.1.4.1.1872.2.1.8.15.1.1.1	INTEGER	read-only	The contract queue number for which the statistics apply.
bwmStatTcEntry	1.3.6.1.4.1.1872.2.1.8.15.1.1		not-accessible	A row in the BWM traffic contract table.
STR bwmStatTcName	1.3.6.1.4.1.1872.2.1.8.15.1.1.2	DisplayString	read-only	The name of the traffic contract queue.
CTR bwmStatTcOutdisoct	1.3.6.1.4.1.1872.2.1.8.15.1.1.4	Counter	read-only	The total number of octets dropped from the traffic contract queue.
CTR bwmStatTcOutoct	1.3.6.1.4.1.1872.2.1.8.15.1.1.3	Counter	read-only	The total number of octets sent out from the traffic contract queue.
CTR bwmStatTcrBufferMax	1.3.6.1.4.1.1872.2.1.8.15.2.1.7	Counter	read-only	The total number of buffers assigned to the traffic contract queue.
CTR bwmStatTcrBufferUsed	1.3.6.1.4.1.1872.2.1.8.15.2.1.6	Counter	read-only	The total number of buffers used by the traffic contract queue.
INT bwmStatTcrContractIndex	1.3.6.1.4.1.1872.2.1.8.15.2.1.1	INTEGER	read-only	The contract queue number for which the statistics apply.
bwmStatTcrEntry	1.3.6.1.4.1.1872.2.1.8.15.2.1		not-accessible	A row in the BWM traffic contract rate table.
STR bwmStatTcrName	1.3.6.1.4.1.1872.2.1.8.15.2.1.2	DisplayString	read-only	The name of the traffic contract queue.
CTR bwmStatTcrOutdisoct	1.3.6.1.4.1.1872.2.1.8.15.2.1.5	Counter	read-only	The total number of octets dropped from the traffic contract queue.
CTR bwmStatTcrOutoct	1.3.6.1.4.1.1872.2.1.8.15.2.1.4	Counter	read-only	The of octets sent out from the traffic contract queue.
INT bwmStatTcrRate	1.3.6.1.4.1.1872.2.1.8.15.2.1.3	INTEGER	read-only	The rate of octets sent out from the traffic contract queue.
bwmStatTcrTable	1.3.6.1.4.1.1872.2.1.8.15.2		not-accessible	The table of Bandwidth Management Traffic Contract Rate statistics.
bwmStatTcTable	1.3.6.1.4.1.1872.2.1.8.15.1		not-accessible	The table of Bandwidth Management Traffic Contract statistics.

RFC description

Configures and monitors bandwidth management policies and contracts on Alteon Tigon load balancing switches.

Start monitoring Alteon traffic-shaping switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALTEON-TS-BWM-MIB

What Is ALTEON-TS-BWM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description