ALTEON-CHEETAH-NETWORK-MIB

All MIBs › ALTEON-CHEETAH-NETWORK-MIB

Organization: Radware Ltd.

Last Updated: 2009-08-05

Category: Vendor: Alteon

Description: Alteon Cheetah switch network MIB for managing IP interfaces, routing, and network-level configuration parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALTEON-CHEETAH-NETWORK-MIB?

ALTEON-CHEETAH-NETWORK-MIB (module identity layer3, under aws-switch) is a Radware (originally Nortel/Alteon "Cheetah") vendor-specific MIB covering Layer 3 configuration, statistics, and operational state on Alteon application-switch platforms. It organizes objects into layer3Configs (ipInterfaceCfg's ipCurCfgIntfTable/ipNewCfgIntfTable for current and pending IP interface addressing, VLAN association, and IPv4/IPv6 mode via ipCurCfgIntfIpVer, plus gateway, static-route, VRRP, ARP, BOOTP, DNS, route-map, BGP, OSPF, and RIPv2 config groups), layer3Stats (arpStats, routeStats, dnsStats, vrrpStats, ospfStats, rip2Stats, tcpStats), and layer3Info/layer3Oper for live routing/ARP/VRRP/OSPF/RIP operational tables. This makes it useful for monitoring IP interface state, dynamic-routing-protocol health (OSPF/BGP/RIPv2/VRRP), and ARP/route-table population on Alteon load-balancing/application switches, since a mismatch between ipNewCfgIntfTable (pending) and ipCurCfgIntfTable (active) configuration often signals a change awaiting apply/save. It depends on ALTEON-ROOT-MIB (aws-switch) for its OID placement and SNMPv2-SMI/SNMPv2-TC conventions, and network teams working with these switches can download the ALTEON-CHEETAH-NETWORK-MIB file for their SNMP tooling.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALTEON-CHEETAH-NETWORK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alteon (Radware) Cheetah-based application switches (AlteonOS switch family)

Monitoring Examples

An operator polls vrrpStats and ospfStats to confirm VRRP mastership and OSPF adjacency counters on an IP interface indexed via ipCurCfgIntfIndex, then compares ipCurCfgIntfState to ipNewCfgIntfTable's pending entry; a disabled current interface state alongside a differing pending configuration would indicate an unapplied configuration change is preventing the interface from routing traffic.

What Can Be Monitored

current and pending IP interface address/VLAN configuration
ARP table statistics and entries
VRRP operational/statistics state
OSPF/BGP/RIPv2 routing statistics
DNS and BOOTP relay statistics
TCP protocol statistics

Imported Objects

From ALTEON-ROOT-MIB

aws-switch

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
PhysAddress

How to Use in IPNetwork Monitor

Example using ripStatInPackets OID:

Select an Alteon (Nortel/Radware) Cheetah-based application switch (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ripStatInPackets into the Find box to locate it in the OID tree, then select it and click OK. The total number of RIP packets recieved. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
allowedNwInfo	1.3.6.1.4.1.1872.2.5.3.3.12
STR allowedNwInfoBeginIpAddr	1.3.6.1.4.1.1872.2.5.3.3.12.1.1.4	DisplayString	read-only	The begin IP address of the allowed network.
STR allowedNwInfoEndIpAddr	1.3.6.1.4.1.1872.2.5.3.3.12.1.1.5	DisplayString	read-only	The begin IP address of the allowed network.
allowedNwInfoEntry	1.3.6.1.4.1.1872.2.5.3.3.12.1.1		not-accessible	A row in the allowed network information table.
I32 allowedNwInfoIndex	1.3.6.1.4.1.1872.2.5.3.3.12.1.1.1	Integer32	read-only	The allowed network index
I32 allowedNwInfoIp6Prefix	1.3.6.1.4.1.1872.2.5.3.3.12.1.1.7	Integer32	read-only	The prefix length of the IP6 allowed network.
INT allowedNwInfoIpver	1.3.6.1.4.1.1872.2.5.3.3.12.1.1.2	INTEGER	read-only	The type of IP address.
STR allowedNwInfoNetMask	1.3.6.1.4.1.1872.2.5.3.3.12.1.1.6	DisplayString	read-only	The subnet mask of the allowed network.
allowedNwInfoTable	1.3.6.1.4.1.1872.2.5.3.3.12.1		not-accessible	The table of allowed network run-time information.
I32 allowedNwInfoVlan	1.3.6.1.4.1.1872.2.5.3.3.12.1.1.3	Integer32	read-only	The VLAN that the allowed network belongs to.
INT arpCacheClear	1.3.6.1.4.1.1872.2.5.3.3.2.2	INTEGER	read-write	Setting this value to clear(2) clears the ARP cache.
arpCfg	1.3.6.1.4.1.1872.2.5.3.1.7
INT arpCurCfgReARPPeriod	1.3.6.1.4.1.1872.2.5.3.1.7.1	INTEGER	read-only	Re-ARP Period in seconds.
arpInfo	1.3.6.1.4.1.1872.2.5.3.3.2
IP arpInfoDestIp	1.3.6.1.4.1.1872.2.5.3.3.2.1.1.1	IpAddress	read-only	The destination IP address of the ARP entry.
arpInfoEntry	1.3.6.1.4.1.1872.2.5.3.3.2.1.1		not-accessible	A row in the ARP table
INT arpInfoFlag	1.3.6.1.4.1.1872.2.5.3.3.2.1.1.6	INTEGER	read-only	The flag associated with this ARP entry.
PHY arpInfoMacAddr	1.3.6.1.4.1.1872.2.5.3.3.2.1.1.2	PhysAddress	read-only	The MAC address for the ARP entry.
I32 arpInfoRefPorts	1.3.6.1.4.1.1872.2.5.3.3.2.1.1.5	Integer32	read-only	The reference SPs associated with this ARP entry.
I32 arpInfoSrcPort	1.3.6.1.4.1.1872.2.5.3.3.2.1.1.4	Integer32	read-only	The port number on which this entry's equivalence is effective.
arpInfoTable	1.3.6.1.4.1.1872.2.5.3.3.2.1		not-accessible	The table of ARP entries.
I32 arpInfoVLAN	1.3.6.1.4.1.1872.2.5.3.3.2.1.1.3	Integer32	read-only	The VLAN identifier for the ARP entry.
INT arpNewCfgReARPPeriod	1.3.6.1.4.1.1872.2.5.3.1.7.2	INTEGER	read-write	Re-ARP Period in seconds.
G32 arpStatEntries	1.3.6.1.4.1.1872.2.5.3.2.2.1	Gauge32	read-only	The current number of ARP entries.
G32 arpStatHighWater	1.3.6.1.4.1.1872.2.5.3.2.2.2	Gauge32	read-only	The highest number of ARP entries.
G32 arpStatMaxEntries	1.3.6.1.4.1.1872.2.5.3.2.2.3	Gauge32	read-only	The maximum number of ARP entries.
arpStats	1.3.6.1.4.1.1872.2.5.3.2.2
I32 bgpAggrTableMax	1.3.6.1.4.1.1872.2.5.3.1.12.5	Integer32	read-only	The maximum number of rows in the BGP aggregation table.
bgpCfg	1.3.6.1.4.1.1872.2.5.3.1.12
IP bgpCurCfgAggrAddr	1.3.6.1.4.1.1872.2.5.3.1.12.6.1.2	IpAddress	read-only	The IP address of the BGP aggregation.
bgpCurCfgAggrEntry	1.3.6.1.4.1.1872.2.5.3.1.12.6.1		not-accessible	Information about a BGP aggregation.
I32 bgpCurCfgAggrIndex	1.3.6.1.4.1.1872.2.5.3.1.12.6.1.1	Integer32	read-only	The aggregation number for which the BGP aggregation is related.
IP bgpCurCfgAggrMask	1.3.6.1.4.1.1872.2.5.3.1.12.6.1.3	IpAddress	read-only	The subnet mask of the BGP aggregation.
INT bgpCurCfgAggrState	1.3.6.1.4.1.1872.2.5.3.1.12.6.1.4	INTEGER	read-only	Enable or disable the BGP aggregation.
bgpCurCfgAggrTable	1.3.6.1.4.1.1872.2.5.3.1.12.6		not-accessible	The table of BGP aggregation configuration.
U32 bgpCurCfgASNumber	1.3.6.1.4.1.1872.2.5.3.1.12.1.7	Unsigned32	read-only	Current autonomous system number.
U32 bgpCurCfgLocalPref	1.3.6.1.4.1.1872.2.5.3.1.12.1.3	Unsigned32	read-only	Local preference value.
U32 bgpCurCfgMaxASPath	1.3.6.1.4.1.1872.2.5.3.1.12.1.5	Unsigned32	read-only	Maximum AS Path Length.
INT bgpCurCfgPeerConRetry	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.21	INTEGER	read-only	The Connect Retry Timer Interval value of the BGP peer IP datagram.
INT bgpCurCfgPeerDefaultAction	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.11	INTEGER	read-only	The value of default route action.
bgpCurCfgPeerEntry	1.3.6.1.4.1.1872.2.5.3.1.12.3.1		not-accessible	Information about a BGP peer.
INT bgpCurCfgPeerFixedState	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.13	INTEGER	read-only	Enable or disable advertising fixed routes.
INT bgpCurCfgPeerHoldTime	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.18	INTEGER	read-only	The Hold Time value of the BGP peer IP datagram.
I32 bgpCurCfgPeerIndex	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.1	Integer32	read-only	The BGP peer number for which the BGP peer table is related.
OCT bgpCurCfgPeerInRmapList	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.16	OCTET STRING	read-only	The route maps present in the in route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
INT bgpCurCfgPeerKeepAlive	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.19	INTEGER	read-only	The KeepAlive Time value of the BGP peer IP datagram.
U32 bgpCurCfgPeerMetric	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.10	Unsigned32	read-only	The metric value of the BGP peer. A value of '0' means none
INT bgpCurCfgPeerMinAS	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.22	INTEGER	read-only	The minimum time between route originations of the BGP peer IP datagram.
INT bgpCurCfgPeerMinTime	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.20	INTEGER	read-only	The min time between advertisements of the BGP peer IP datagram.
INT bgpCurCfgPeerOspfState	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.12	INTEGER	read-only	Enable or disable advertising OSPF routes.
OCT bgpCurCfgPeerOutRmapList	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.17	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
IP bgpCurCfgPeerRemoteAddr	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.2	IpAddress	read-only	The remote IP address of the BGP peer.
INT bgpCurCfgPeerRemoteAs	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.3	INTEGER	read-only	The remote AS number of the BGP peer. 0 means none
INT bgpCurCfgPeerRipState	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.23	INTEGER	read-only	Enable or disable RIP static routes.
INT bgpCurCfgPeerState	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.5	INTEGER	read-only	Enable or disable the peer.
INT bgpCurCfgPeerStaticState	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.14	INTEGER	read-only	Enable or disable advertising static routes.
bgpCurCfgPeerTable	1.3.6.1.4.1.1872.2.5.3.1.12.3		not-accessible	The table of BGP peer configuration in the current_config.
INT bgpCurCfgPeerTtl	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.4	INTEGER	read-only	The time-to-live value of the BGP peer IP datagram.
INT bgpCurCfgPeerVipState	1.3.6.1.4.1.1872.2.5.3.1.12.3.1.15	INTEGER	read-only	Enable or disable VIP static routes.
INT bgpCurCfgState	1.3.6.1.4.1.1872.2.5.3.1.12.1.1	INTEGER	read-only	BGP global state.
bgpGeneral	1.3.6.1.4.1.1872.2.5.3.1.12.1
IP bgpNewCfgAggrAddr	1.3.6.1.4.1.1872.2.5.3.1.12.7.1.2	IpAddress	read-create	The IP address of the BGP aggregation.
INT bgpNewCfgAggrDelete	1.3.6.1.4.1.1872.2.5.3.1.12.7.1.5	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
bgpNewCfgAggrEntry	1.3.6.1.4.1.1872.2.5.3.1.12.7.1		not-accessible	Information about an BGP aggregation.
I32 bgpNewCfgAggrIndex	1.3.6.1.4.1.1872.2.5.3.1.12.7.1.1	Integer32	read-only	The aggregation number for which the BGP aggregation is related.
IP bgpNewCfgAggrMask	1.3.6.1.4.1.1872.2.5.3.1.12.7.1.3	IpAddress	read-create	The subnet mask of the BGP aggregation.
INT bgpNewCfgAggrState	1.3.6.1.4.1.1872.2.5.3.1.12.7.1.4	INTEGER	read-create	Enable or disable the BGP aggregation.
bgpNewCfgAggrTable	1.3.6.1.4.1.1872.2.5.3.1.12.7		not-accessible	The table of BGP aggregation configuration.
U32 bgpNewCfgASNumber	1.3.6.1.4.1.1872.2.5.3.1.12.1.8	Unsigned32	read-write	New autonomous system number.Enter 0 to delete this number.
U32 bgpNewCfgLocalPref	1.3.6.1.4.1.1872.2.5.3.1.12.1.4	Unsigned32	read-write	Local Preference value.
U32 bgpNewCfgMaxASPath	1.3.6.1.4.1.1872.2.5.3.1.12.1.6	Unsigned32	read-write	Maximum AS Path Length.
I32 bgpNewCfgPeerAddInRmap	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.18	Integer32	read-create	The route map to be add into in-rmap list. When read, 0 is returned.
I32 bgpNewCfgPeerAddOutRmap	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.19	Integer32	read-create	The route map to be add into out-rmap list. When read, 0 is returned.
INT bgpNewCfgPeerConRetry	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.25	INTEGER	read-create	The Connect Retry Timer Interval value of the BGP peer IP datagram.
INT bgpNewCfgPeerDefaultAction	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.11	INTEGER	read-create	The value of default route action.
INT bgpNewCfgPeerDelete	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
bgpNewCfgPeerEntry	1.3.6.1.4.1.1872.2.5.3.1.12.4.1		not-accessible	Information about a BGP peer.
INT bgpNewCfgPeerFixedState	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.13	INTEGER	read-create	Enable or disable advertising fixed routes.
INT bgpNewCfgPeerHoldTime	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.22	INTEGER	read-create	The Hold Time value of the BGP peer IP datagram.
I32 bgpNewCfgPeerIndex	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.1	Integer32	read-only	The BGP peer number for which the BGP peer table is related.
OCT bgpNewCfgPeerInRmapList	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.16	OCTET STRING	read-only	The route maps present in the in route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
INT bgpNewCfgPeerKeepAlive	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.23	INTEGER	read-create	The KeepAlive Time value of the BGP peer IP datagram.
U32 bgpNewCfgPeerMetric	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.10	Unsigned32	read-create	The metric value of the BGP peer. A value of '0' means none
INT bgpNewCfgPeerMinAS	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.26	INTEGER	read-create	The minimum time between route originations of the BGP peer IP datagram.
INT bgpNewCfgPeerMinTime	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.24	INTEGER	read-create	The mininum time between advertisements of the BGP peer IP datagram.
INT bgpNewCfgPeerOspfState	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.12	INTEGER	read-create	Enable or disable advertising OSPF routes.
OCT bgpNewCfgPeerOutRmapList	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.17	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
IP bgpNewCfgPeerRemoteAddr	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.2	IpAddress	read-create	The remote IP address of the BGP peer.
INT bgpNewCfgPeerRemoteAs	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.3	INTEGER	read-create	The remote AS number of the BGP peer. 0 means none
I32 bgpNewCfgPeerRemoveInRmap	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.20	Integer32	read-create	The route map to be removed from out-rmap list. When read, 0 is returned.
I32 bgpNewCfgPeerRemoveOutRmap	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.21	Integer32	read-create	The route map to be removed from out-rmap list. When read, 0 is returned.
INT bgpNewCfgPeerRipState	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.27	INTEGER	read-create	Enable or disable RIP static routes.
INT bgpNewCfgPeerState	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.5	INTEGER	read-create	Enable or disable the peer.
INT bgpNewCfgPeerStaticState	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.14	INTEGER	read-create	Enable or disable advertising static routes.
bgpNewCfgPeerTable	1.3.6.1.4.1.1872.2.5.3.1.12.4		not-accessible	The table of BGP peer configuration in the current_config.
INT bgpNewCfgPeerTtl	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.4	INTEGER	read-create	The time-to-live value of the BGP peer IP datagram.
INT bgpNewCfgPeerVipState	1.3.6.1.4.1.1872.2.5.3.1.12.4.1.15	INTEGER	read-create	Enable or disable VIP static routes.
INT bgpNewCfgState	1.3.6.1.4.1.1872.2.5.3.1.12.1.2	INTEGER	read-write	Globally turn BGP on or off.
bgpOper	1.3.6.1.4.1.1872.2.5.3.4.2.1
bgpOperStart	1.3.6.1.4.1.1872.2.5.3.4.2.1.1
INT bgpOperStartPeerNum	1.3.6.1.4.1.1872.2.5.3.4.2.1.1.1	INTEGER	read-write	Enter BGP peer Number.Value 1 is returned when object is read.
INT bgpOperStartSess	1.3.6.1.4.1.1872.2.5.3.4.2.1.1.2	INTEGER	read-write	This is the action object,start(2) is to Start BGP peer session. ok(1) is returned when object is read
bgpOperStop	1.3.6.1.4.1.1872.2.5.3.4.2.1.2
INT bgpOperStopPeerNum	1.3.6.1.4.1.1872.2.5.3.4.2.1.2.1	INTEGER	read-write	Enter BGP peer Number.Value 1 is returned when object is read.
INT bgpOperStopSess	1.3.6.1.4.1.1872.2.5.3.4.2.1.2.2	INTEGER	read-write	This is an action object,stop(2) is to Stop BGP peer session. ok(1) is returned when object is read
I32 bgpPeerTableMax	1.3.6.1.4.1.1872.2.5.3.1.12.2	Integer32	read-only	The maximum number of rows in the BGP peer table.
clearStats	1.3.6.1.4.1.1872.2.5.3.2.7
dnsCfg	1.3.6.1.4.1.1872.2.5.3.1.9
STR dnsCurCfgDomainName	1.3.6.1.4.1.1872.2.5.3.1.9.5	DisplayString	read-only	The DNS doamin name in the current_configuration block.
IP dnsCurCfgPrimaryIpAddr	1.3.6.1.4.1.1872.2.5.3.1.9.1	IpAddress	read-only	The DNS primary IP address in the current_configuration block.
STR dnsCurCfgPrimaryIpv6Addr	1.3.6.1.4.1.1872.2.5.3.1.9.7	DisplayString	read-only	The DNS primary IPv6 address in the current_configuration block.
IP dnsCurCfgSecondaryIpAddr	1.3.6.1.4.1.1872.2.5.3.1.9.3	IpAddress	read-only	The DNS secondary IP address in the current_configuration block.
STR dnsCurCfgSecondaryIpv6Addr	1.3.6.1.4.1.1872.2.5.3.1.9.9	DisplayString	read-only	The DNS secondary IPv6 address in the current_configuration block.
STR dnsNewCfgDomainName	1.3.6.1.4.1.1872.2.5.3.1.9.6	DisplayString	read-write	The DNS doamin name in the new_configuration block.
IP dnsNewCfgPrimaryIpAddr	1.3.6.1.4.1.1872.2.5.3.1.9.2	IpAddress	read-write	The DNS primary IP address in the new_configuration block.
STR dnsNewCfgPrimaryIpv6Addr	1.3.6.1.4.1.1872.2.5.3.1.9.8	DisplayString	read-write	The DNS primary IPv6 address in the new_configuration block.
IP dnsNewCfgSecondaryIpAddr	1.3.6.1.4.1.1872.2.5.3.1.9.4	IpAddress	read-write	The DNS secondary IP address in the new_configuration block.
STR dnsNewCfgSecondaryIpv6Addr	1.3.6.1.4.1.1872.2.5.3.1.9.10	DisplayString	read-write	The DNS secondary IPv6 address in the new_configuration block.
C32 dnsStatInBadDnsRequests	1.3.6.1.4.1.1872.2.5.3.2.4.2	Counter32	read-only	The total number of DNS request packets received that were dropped.
C32 dnsStatInGoodDnsRequests	1.3.6.1.4.1.1872.2.5.3.2.4.1	Counter32	read-only	The total number of DNS request packets which are received.
C32 dnsStatOutDnsRequests	1.3.6.1.4.1.1872.2.5.3.2.4.3	Counter32	read-only	The total number of DNS response packets that have been transmitted.
dnsStats	1.3.6.1.4.1.1872.2.5.3.2.4
garpOper	1.3.6.1.4.1.1872.2.5.3.4.2.2
IP garpOperIpAddr	1.3.6.1.4.1.1872.2.5.3.4.2.2.1	IpAddress	read-write	Ip Address to Send gratuitous arp.Value 0.0.0.0 is returned when object is read.
INT garpOperSend	1.3.6.1.4.1.1872.2.5.3.4.2.2.3	INTEGER	read-write	This is an action object,When set to value of send(2), it sends gratuitous arp.ok(1) is returned when garp request is sent successfully.Otherwise error(3) is returned.
INT garpOperVlanNumber	1.3.6.1.4.1.1872.2.5.3.4.2.2.2	INTEGER	read-write	Vlan Number to Send gratuitous arp.Value 1 is returned when object is read.
gatewayInfo	1.3.6.1.4.1.1872.2.5.3.3.5
IP gatewayInfoAddr	1.3.6.1.4.1.1872.2.5.3.3.5.1.1.2	IpAddress	read-only	The IP address of the default gateway.
STR gatewayInfoAddr6	1.3.6.1.4.1.1872.2.5.3.3.5.1.1.5	DisplayString	read-only	The IP6 address of the default gateway.
gatewayInfoEntry	1.3.6.1.4.1.1872.2.5.3.3.5.1.1		not-accessible	A row in the gateway information table
I32 gatewayInfoIndex	1.3.6.1.4.1.1872.2.5.3.3.5.1.1.1	Integer32	read-only	The gateway number for which the information is related.
INT gatewayInfoStatus	1.3.6.1.4.1.1872.2.5.3.3.5.1.1.4	INTEGER	read-only	The status of the default gateway.
gatewayInfoTable	1.3.6.1.4.1.1872.2.5.3.3.5.1		not-accessible	The table containing information for the default gateways.
I32 gatewayInfoVlan	1.3.6.1.4.1.1872.2.5.3.3.5.1.1.3	Integer32	read-only	The VLAN number for this gateway.
C32 icmp6InDestUnreachs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.11	Counter32	read-only	The number of ICMP Destination Unreachable messages received.
C32 icmp6InEchoReps	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.6	Counter32	read-only	The number of ICMP Echo Reply messages received.
C32 icmp6InEchos	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.5	Counter32	read-only	The number of ICMP Echo request messages received.
C32 icmp6InErrors	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.4	Counter32	read-only	The number of ICMP messages received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
C32 icmp6InMsgs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.3	Counter32	read-only	The total number of ICMP messages received. Note that this Counter32 includes all those counted by icmpInErrors.
C32 icmp6InNAs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.8	Counter32	read-only	The number of neighbour advertisements received.
C32 icmp6InNSs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.7	Counter32	read-only	The number of neighbour solicitations received.
C32 icmp6InParmProbs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.14	Counter32	read-only	The number of ICMP Parameter Problem messages received.
C32 icmp6InRAs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.10	Counter32	read-only	The number of router advertisements received.
C32 icmp6InRedirects	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.15	Counter32	read-only	The number of ICMP Redirect messages received.
C32 icmp6InRSs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.9	Counter32	read-only	The number of router solicitations received.
I32 icmp6IntfIndex	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.2	Integer32	read-only	IP interface index in interface configuration table.
C32 icmp6InTimeExcds	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.12	Counter32	read-only	The number of ICMP Time Exceeded messages received.
C32 icmp6InTooBigs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.13	Counter32	read-only	The number of ICMP too big messages received.
C32 icmp6OutEchoReps	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.19	Counter32	read-only	The number of ICMP Echo Reply messages sent.
C32 icmp6OutEchos	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.18	Counter32	read-only	The number of ICMP Echo request messages sent.
C32 icmp6OutErrors	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.17	Counter32	read-only	The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers.
C32 icmp6OutMsgs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.16	Counter32	read-only	The total number of ICMP messages which this entity attempted to send. Note that this Counter32 includes all those counted by icmp6OutErrors.
C32 icmp6OutNAs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.21	Counter32	read-only	The number of neighbour advertisements sent.
C32 icmp6OutNSs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.20	Counter32	read-only	The number of neighbour solicitations sent.
C32 icmp6OutRAs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.23	Counter32	read-only	The number of router advertisements sent.
C32 icmp6OutRedirects	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.24	Counter32	read-only	The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects.
C32 icmp6OutRSs	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.22	Counter32	read-only	The number of router solicitations sent.
icmp6Stats	1.3.6.1.4.1.1872.2.5.3.2.11
icmp6StatsEntry	1.3.6.1.4.1.1872.2.5.3.2.11.1.1		not-accessible	Statistics for IGMP Snooping.
I32 icmp6StatsIndx	1.3.6.1.4.1.1872.2.5.3.2.11.1.1.1	Integer32	read-only	The index of this statistics table.
icmp6StatsTable	1.3.6.1.4.1.1872.2.5.3.2.11.1		not-accessible	Statistics for ICMP6.
INT ifClearStats	1.3.6.1.4.1.1872.2.5.3.2.7.2.1.2	INTEGER	read-write	Setting this to clear(2) results in clearing the statistics for this IP interface (if) stats.
ifStatsEntry	1.3.6.1.4.1.1872.2.5.3.2.7.2.1		not-accessible	IP Interface statistics.
I32 ifStatsIndex	1.3.6.1.4.1.1872.2.5.3.2.7.2.1.1	Integer32	read-only	The index of the IP interface for which these statistics apply.
ifStatsTable	1.3.6.1.4.1.1872.2.5.3.2.7.2		not-accessible	The table of Interface Statistics.
STR intfInfoAddr	1.3.6.1.4.1.1872.2.5.3.3.9.1.1.3	DisplayString	read-only	The IP address of the interface.
STR intfInfoBcastAddr	1.3.6.1.4.1.1872.2.5.3.3.9.1.1.5	DisplayString	read-only	The broadcast address of the interface.
intfInfoEntry	1.3.6.1.4.1.1872.2.5.3.3.9.1.1		not-accessible	A row in IP interface information table.
I32 intfInfoIndex	1.3.6.1.4.1.1872.2.5.3.3.9.1.1.1	Integer32	read-only	The interface number for which the information is related.
INT intfInfoIpver	1.3.6.1.4.1.1872.2.5.3.3.9.1.1.2	INTEGER	read-only	The type of IP address.
STR intfInfoLinkLocalAddr	1.3.6.1.4.1.1872.2.5.3.3.9.1.1.8	DisplayString	read-only	The site local address of the interface.
STR intfInfoNetMask	1.3.6.1.4.1.1872.2.5.3.3.9.1.1.4	DisplayString	read-only	The subnet mask of the interface.
INT intfInfoStatus	1.3.6.1.4.1.1872.2.5.3.3.9.1.1.7	INTEGER	read-only	The status of the interface.
I32 intfInfoVlan	1.3.6.1.4.1.1872.2.5.3.3.9.1.1.6	Integer32	read-only	The VLAN number for this interface.
C32 ip6ForwDatagrams	1.3.6.1.4.1.1872.2.5.3.2.10.2	Counter32	read-only	The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination.
C32 ip6GwEchoreq	1.3.6.1.4.1.1872.2.5.3.2.12.1.1.3	Counter32	read-only	The number of GW Echo request messages .
C32 ip6GwEchoresp	1.3.6.1.4.1.1872.2.5.3.2.12.1.1.4	Counter32	read-only	The number of GW Echo response messages .
C32 ip6GwFails	1.3.6.1.4.1.1872.2.5.3.2.12.1.1.5	Counter32	read-only	The number of GWs fails.
I32 ip6GwIndex	1.3.6.1.4.1.1872.2.5.3.2.12.1.1.2	Integer32	read-only	Gateway index in gateway configuration table.
I32 ip6GwMaster	1.3.6.1.4.1.1872.2.5.3.2.12.1.1.6	Integer32	read-only	The master gateway.
C32 ip6GwRetry	1.3.6.1.4.1.1872.2.5.3.2.12.1.1.8	Counter32	read-only	The number of retries.
ip6gwStats	1.3.6.1.4.1.1872.2.5.3.2.12
ip6GwStatsEntry	1.3.6.1.4.1.1872.2.5.3.2.12.1.1		not-accessible	Statistics for IP6 Gateway.
I32 ip6GwStatsIndex	1.3.6.1.4.1.1872.2.5.3.2.12.1.1.1	Integer32	read-only	The index of Gw6 statistics.
ip6GwStatsTable	1.3.6.1.4.1.1872.2.5.3.2.12.1		not-accessible	Statistics for IP6 Gateway.
C32 ip6icmpInErrors	1.3.6.1.4.1.1872.2.5.3.2.10.13	Counter32	read-only	The number of ICMP messages received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.).
C32 ip6icmpInMsgs	1.3.6.1.4.1.1872.2.5.3.2.10.11	Counter32	read-only	The total number of ICMP messages received. Note that this Counter32 includes all those counted by icmpInErrors.
C32 ip6icmpOutErrors	1.3.6.1.4.1.1872.2.5.3.2.10.14	Counter32	read-only	The number of ICMP messages did not send due to problems discovered within ICMP such as a lack of buffers.
C32 ip6icmpOutMsgs	1.3.6.1.4.1.1872.2.5.3.2.10.12	Counter32	read-only	The total number of ICMP messages attempted to send. Note that this Counter32 includes all those counted by icmp6OutErrors.
I32 ip6IfIndex	1.3.6.1.4.1.1872.2.5.3.2.12.1.1.7	Integer32	read-only	The IP6 interface.
C32 ip6InAddrErrors	1.3.6.1.4.1.1872.2.5.3.2.10.6	Counter32	read-only	The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity.
C32 ip6InDelivers	1.3.6.1.4.1.1872.2.5.3.2.10.3	Counter32	read-only	The total number of input datagrams successfully delivered to IP user-protocols (including ICMP).
C32 ip6InDiscards	1.3.6.1.4.1.1872.2.5.3.2.10.4	Counter32	read-only	The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly.
C32 ip6InReceives	1.3.6.1.4.1.1872.2.5.3.2.10.1	Counter32	read-only	The total number of input datagrams received from interfaces, including those received in error.
C32 ip6InUnknownProtos	1.3.6.1.4.1.1872.2.5.3.2.10.5	Counter32	read-only	The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol.
C32 ip6OutNoRoutes	1.3.6.1.4.1.1872.2.5.3.2.10.8	Counter32	read-only	The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this Counter32 includes any packets counted in ipForwDatagrams which meet this`no-route' criterion. Note that this includes any datagrams which a host cannot route because all of its default gateways are down.
C32 ip6OutRequests	1.3.6.1.4.1.1872.2.5.3.2.10.7	Counter32	read-only	The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams.
C32 ip6ReasmFails	1.3.6.1.4.1.1872.2.5.3.2.10.10	Counter32	read-only	The number of failures detected by the IP re-assembly.
C32 ip6ReasmOKs	1.3.6.1.4.1.1872.2.5.3.2.10.9	Counter32	read-only	The number of IP datagrams successfully re-assembled.
ip6Stats	1.3.6.1.4.1.1872.2.5.3.2.10
I32 ipAlistTableMax	1.3.6.1.4.1.1872.2.5.3.1.11.4	Integer32	read-only	The maximum number of rows in the IP route map table.
I32 ipAspathTableMax	1.3.6.1.4.1.1872.2.5.3.1.11.7	Integer32	read-only	The maximum number of rows in the IP route map table.
ipBootpCfg	1.3.6.1.4.1.1872.2.5.3.1.8
INT ipClearStats	1.3.6.1.4.1.1872.2.5.3.2.7.1	INTEGER	read-write	Setting this to clear(2) results in clearing the IP statistics.
INT ipCurCfgAlistAction	1.3.6.1.4.1.1872.2.5.3.1.11.5.1.5	INTEGER	read-only	Action of the route map access list.
ipCurCfgAlistEntry	1.3.6.1.4.1.1872.2.5.3.1.11.5.1		not-accessible	Information about an IP route map.
I32 ipCurCfgAlistIndex	1.3.6.1.4.1.1872.2.5.3.1.11.5.1.2	Integer32	read-only	The access list number for which the access list is related.
U32 ipCurCfgAlistMetric	1.3.6.1.4.1.1872.2.5.3.1.11.5.1.4	Unsigned32	read-only	The metric of the route map access list. 4294967295 means none
INT ipCurCfgAlistNwf	1.3.6.1.4.1.1872.2.5.3.1.11.5.1.3	INTEGER	read-only	The network filter number of the route map access list. 0 means none
I32 ipCurCfgAlistRmapIndex	1.3.6.1.4.1.1872.2.5.3.1.11.5.1.1	Integer32	read-only	The route map number for which the RMAP is related.
INT ipCurCfgAlistState	1.3.6.1.4.1.1872.2.5.3.1.11.5.1.6	INTEGER	read-only	Enable or disable the route map access list.
ipCurCfgAlistTable	1.3.6.1.4.1.1872.2.5.3.1.11.5		not-accessible	The table of IP route map access list configuration in the current_config.
INT ipCurCfgASNumber	1.3.6.1.4.1.1872.2.5.3.1.14.3	INTEGER	read-only	The autonomous system (AS) number.
INT ipCurCfgAspathAction	1.3.6.1.4.1.1872.2.5.3.1.11.8.1.4	INTEGER	read-only	Action of the route map access path.
INT ipCurCfgAspathAS	1.3.6.1.4.1.1872.2.5.3.1.11.8.1.3	INTEGER	read-only	The AS number of the route map access path. 0 means none
ipCurCfgAspathEntry	1.3.6.1.4.1.1872.2.5.3.1.11.8.1		not-accessible	Information about an IP route map.
I32 ipCurCfgAspathIndex	1.3.6.1.4.1.1872.2.5.3.1.11.8.1.2	Integer32	read-only	The access path number for which the access list is related.
I32 ipCurCfgAspathRmapIndex	1.3.6.1.4.1.1872.2.5.3.1.11.8.1.1	Integer32	read-only	The route map number for which the RMAP is related.
INT ipCurCfgAspathState	1.3.6.1.4.1.1872.2.5.3.1.11.8.1.5	INTEGER	read-only	Enable or disable the route map access path.
ipCurCfgAspathTable	1.3.6.1.4.1.1872.2.5.3.1.11.8		not-accessible	The table of IP route map access path configuration.
IP ipCurCfgBootpAddr	1.3.6.1.4.1.1872.2.5.3.1.8.1	IpAddress	read-only	The IP address of BOOTP server.
IP ipCurCfgBootpAddr2	1.3.6.1.4.1.1872.2.5.3.1.8.3	IpAddress	read-only	The IP address of second BOOTP server.
INT ipCurCfgBootpState	1.3.6.1.4.1.1872.2.5.3.1.8.5	INTEGER	read-only	The state of BOOTP relay.
IP ipCurCfgGwAddr	1.3.6.1.4.1.1872.2.5.3.1.2.4.1.2	IpAddress	read-only	The IP address of the default gateway.
INT ipCurCfgGwArp	1.3.6.1.4.1.1872.2.5.3.1.2.4.1.6	INTEGER	read-only	The state of ARP only health checks.
ipCurCfgGwEntry	1.3.6.1.4.1.1872.2.5.3.1.2.4.1		not-accessible	A row in the Ip gateway table
I32 ipCurCfgGwIndex	1.3.6.1.4.1.1872.2.5.3.1.2.4.1.1	Integer32	read-only	The gateway number for which the information is related.
INT ipCurCfgGwInterval	1.3.6.1.4.1.1872.2.5.3.1.2.4.1.3	INTEGER	read-only	The interval between ping attempts.
STR ipCurCfgGwIpv6Addr	1.3.6.1.4.1.1872.2.5.3.1.2.4.1.10	DisplayString	read-only	The IPv6 address of the gateway. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
INT ipCurCfgGwIpVer	1.3.6.1.4.1.1872.2.5.3.1.2.4.1.9	INTEGER	read-only	The type of IP address.
INT ipCurCfgGwMetric	1.3.6.1.4.1.1872.2.5.3.1.2.1	INTEGER	read-only	The default gateway metric.
INT ipCurCfgGwPriority	1.3.6.1.4.1.1872.2.5.3.1.2.4.1.8	INTEGER	read-only	The priority of the default route for this gateway. High priority means that the default gateway route will have higher priority over learned default routes. Low priority means that the default gateway route will have lower priority than learned default routes.
INT ipCurCfgGwRetry	1.3.6.1.4.1.1872.2.5.3.1.2.4.1.4	INTEGER	read-only	The number of failed attempts to declare the default gateway DOWN.
INT ipCurCfgGwState	1.3.6.1.4.1.1872.2.5.3.1.2.4.1.5	INTEGER	read-only	The state of the default gateway.
ipCurCfgGwTable	1.3.6.1.4.1.1872.2.5.3.1.2.4		not-accessible	The table of gateways in the Current configuration Block.
I32 ipCurCfgGwVlan	1.3.6.1.4.1.1872.2.5.3.1.2.4.1.7	Integer32	read-only	The VLAN number for this gateway. The first 4 entries in the table are only used for default gateway load balancing hence the VLAN cannot be specified for the first 4 entries.
IP ipCurCfgIntfAddr	1.3.6.1.4.1.1872.2.5.3.1.1.2.1.2	IpAddress	read-only	The IP address of the interface.
INT ipCurCfgIntfBootpRelay	1.3.6.1.4.1.1872.2.5.3.1.1.2.1.7	INTEGER	read-only	Enable/disable BOOTP relay.
IP ipCurCfgIntfBroadcast	1.3.6.1.4.1.1872.2.5.3.1.1.2.1.4	IpAddress	read-only	The broadcast address of the interface.
ipCurCfgIntfEntry	1.3.6.1.4.1.1872.2.5.3.1.1.2.1		not-accessible	A row in the Ip interface table
I32 ipCurCfgIntfIndex	1.3.6.1.4.1.1872.2.5.3.1.1.2.1.1	Integer32	read-only	The interface number for which the IP information is related.
STR ipCurCfgIntfIpv6Addr	1.3.6.1.4.1.1872.2.5.3.1.1.2.1.10	DisplayString	read-only	The IPv6 address of the interface. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
INT ipCurCfgIntfIpVer	1.3.6.1.4.1.1872.2.5.3.1.1.2.1.9	INTEGER	read-only	The type of IP address.
IP ipCurCfgIntfMask	1.3.6.1.4.1.1872.2.5.3.1.1.2.1.3	IpAddress	read-only	The subnet mask of the interface.
INT ipCurCfgIntfPrefixLen	1.3.6.1.4.1.1872.2.5.3.1.1.2.1.11	INTEGER	read-only	The prefix length associated with this IP address .
INT ipCurCfgIntfRouteAdv	1.3.6.1.4.1.1872.2.5.3.1.1.2.1.12	INTEGER	read-only	Enable/disable route advertisement of the interface.
INT ipCurCfgIntfState	1.3.6.1.4.1.1872.2.5.3.1.1.2.1.6	INTEGER	read-only	The state of the interface.
ipCurCfgIntfTable	1.3.6.1.4.1.1872.2.5.3.1.1.2		not-accessible	The table of IP interface configuration.
I32 ipCurCfgIntfVlan	1.3.6.1.4.1.1872.2.5.3.1.1.2.1.5	Integer32	read-only	The VLAN associated with the interface.
IP ipCurCfgNwfAddr	1.3.6.1.4.1.1872.2.5.3.1.10.2.1.2	IpAddress	read-only	The IP address of the network filter.
ipCurCfgNwfEntry	1.3.6.1.4.1.1872.2.5.3.1.10.2.1		not-accessible	Information about an IP network filter.
I32 ipCurCfgNwfIndex	1.3.6.1.4.1.1872.2.5.3.1.10.2.1.1	Integer32	read-only	The network filter number for which the NWF is related.
IP ipCurCfgNwfMask	1.3.6.1.4.1.1872.2.5.3.1.10.2.1.3	IpAddress	read-only	The subnet mask of the network filter.
INT ipCurCfgNwfState	1.3.6.1.4.1.1872.2.5.3.1.10.2.1.4	INTEGER	read-only	Enable or disable the network filter.
ipCurCfgNwfTable	1.3.6.1.4.1.1872.2.5.3.1.10.2		not-accessible	The table of IP network filter configuration in the current_config.
STR ipCurCfgRmapAp	1.3.6.1.4.1.1872.2.5.3.1.11.2.1.7	DisplayString	read-only	The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]
ipCurCfgRmapEntry	1.3.6.1.4.1.1872.2.5.3.1.11.2.1		not-accessible	Information about an IP route map.
I32 ipCurCfgRmapIndex	1.3.6.1.4.1.1872.2.5.3.1.11.2.1.1	Integer32	read-only	The route map number for which the RMAP is related.
U32 ipCurCfgRmapLp	1.3.6.1.4.1.1872.2.5.3.1.11.2.1.2	Unsigned32	read-only	The local-preference of the route map. 4294967295 means none
U32 ipCurCfgRmapMetric	1.3.6.1.4.1.1872.2.5.3.1.11.2.1.3	Unsigned32	read-only	The metric of the route map. 4294967295 means none
INT ipCurCfgRmapMetricType	1.3.6.1.4.1.1872.2.5.3.1.11.2.1.8	INTEGER	read-only	The OSPF metric-type of the matched route.
INT ipCurCfgRmapPrec	1.3.6.1.4.1.1872.2.5.3.1.11.2.1.4	INTEGER	read-only	The precedence of the route map.
INT ipCurCfgRmapState	1.3.6.1.4.1.1872.2.5.3.1.11.2.1.6	INTEGER	read-only	Enable or disable the route map.
ipCurCfgRmapTable	1.3.6.1.4.1.1872.2.5.3.1.11.2		not-accessible	The table of IP route map configuration in the current_config.
INT ipCurCfgRmapWeight	1.3.6.1.4.1.1872.2.5.3.1.11.2.1.5	INTEGER	read-only	The weight of the route map. 65535 means none
IP ipCurCfgRouterID	1.3.6.1.4.1.1872.2.5.3.1.14.1	IpAddress	read-only	The router ID of the switch.
ipCurCfgStaticArpEntry	1.3.6.1.4.1.1872.2.5.3.1.15.2.1		not-accessible	A row in the static ARP table
I32 ipCurCfgStaticArpIndx	1.3.6.1.4.1.1872.2.5.3.1.15.2.1.1	Integer32	read-only	The index of the static ARP table.
IP ipCurCfgStaticArpIp	1.3.6.1.4.1.1872.2.5.3.1.15.2.1.2	IpAddress	read-only	The IP address for the ARP entry.
PHY ipCurCfgStaticArpMAC	1.3.6.1.4.1.1872.2.5.3.1.15.2.1.3	PhysAddress	read-only	The MAC address for the ARP entry.
I32 ipCurCfgStaticArpPort	1.3.6.1.4.1.1872.2.5.3.1.15.2.1.5	Integer32	read-only	The port for the ARP entry.
ipCurCfgStaticArpTable	1.3.6.1.4.1.1872.2.5.3.1.15.2		not-accessible	The table of static ARPs in the current configuration block.
I32 ipCurCfgStaticArpVlan	1.3.6.1.4.1.1872.2.5.3.1.15.2.1.4	Integer32	read-only	The VLAN for the ARP entry.
IP ipCurCfgStaticRouteDestIp	1.3.6.1.4.1.1872.2.5.3.1.3.2.1.2	IpAddress	read-only	The destination IP address of this route.
ipCurCfgStaticRouteEntry	1.3.6.1.4.1.1872.2.5.3.1.3.2.1		not-accessible	A row in the static IP route table
IP ipCurCfgStaticRouteGateway	1.3.6.1.4.1.1872.2.5.3.1.3.2.1.4	IpAddress	read-only	The destination IP address of this route.
I32 ipCurCfgStaticRouteIndx	1.3.6.1.4.1.1872.2.5.3.1.3.2.1.1	Integer32	read-only	The index of the static routing table.
I32 ipCurCfgStaticRouteInterface	1.3.6.1.4.1.1872.2.5.3.1.3.2.1.5	Integer32	read-only	The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
IP ipCurCfgStaticRouteMask	1.3.6.1.4.1.1872.2.5.3.1.3.2.1.3	IpAddress	read-only	The destination IP address of this route.
ipCurCfgStaticRouteTable	1.3.6.1.4.1.1872.2.5.3.1.3.2		not-accessible	The table of static routes in the current configuration block.
ipForwardCfg	1.3.6.1.4.1.1872.2.5.3.1.4
INT ipFwdCurCfgDirectedBcast	1.3.6.1.4.1.1872.2.5.3.1.4.1.3	INTEGER	read-only	Enable or disable forwarding directed broadcasts.
ipFwdCurCfgLocalEntry	1.3.6.1.4.1.1872.2.5.3.1.4.6.1		not-accessible	A row in the ipFwdCurCfgLocalTable
I32 ipFwdCurCfgLocalIndex	1.3.6.1.4.1.1872.2.5.3.1.4.6.1.1	Integer32	read-only	The index of ipFwdCurCfgLocalTable.
IP ipFwdCurCfgLocalMask	1.3.6.1.4.1.1872.2.5.3.1.4.6.1.3	IpAddress	read-only	The current local IP subnet mask.
IP ipFwdCurCfgLocalSubnet	1.3.6.1.4.1.1872.2.5.3.1.4.6.1.2	IpAddress	read-only	The current local IP subnet.
ipFwdCurCfgLocalTable	1.3.6.1.4.1.1872.2.5.3.1.4.6		not-accessible	The table of local network definition.
INT ipFwdCurCfgNoICMPRedirect	1.3.6.1.4.1.1872.2.5.3.1.4.1.5	INTEGER	read-only	Enable or disable no icmp redirects.
ipFwdCurCfgPortEntry	1.3.6.1.4.1.1872.2.5.3.1.4.3.1		not-accessible	A row in the ipFwdCurCfgPortTable
I32 ipFwdCurCfgPortIndex	1.3.6.1.4.1.1872.2.5.3.1.4.3.1.1	Integer32	read-only	The port number for which the forwarding state information pertains.
INT ipFwdCurCfgPortState	1.3.6.1.4.1.1872.2.5.3.1.4.3.1.2	INTEGER	read-only	The forwarding state of the port.
ipFwdCurCfgPortTable	1.3.6.1.4.1.1872.2.5.3.1.4.3		not-accessible	The table of ports and their forwarding states
INT ipFwdCurCfgRtCache	1.3.6.1.4.1.1872.2.5.3.1.4.1.7	INTEGER	read-only	Enable or disable SP Route Caching.
INT ipFwdCurCfgState	1.3.6.1.4.1.1872.2.5.3.1.4.1.1	INTEGER	read-only	IP forwarding global state.
ipFwdGeneralCfg	1.3.6.1.4.1.1872.2.5.3.1.4.1
I32 ipFwdLocalTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.4.5	Integer32	read-only	The maximum number of rows in the Local table.
INT ipFwdNewCfgDirectedBcast	1.3.6.1.4.1.1872.2.5.3.1.4.1.4	INTEGER	read-write	Enable or disable forwarding directed broadcasts.
INT ipFwdNewCfgLocalDelete	1.3.6.1.4.1.1872.2.5.3.1.4.7.1.4	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipFwdNewCfgLocalEntry	1.3.6.1.4.1.1872.2.5.3.1.4.7.1		not-accessible	A row in the ipFwdNewCfgLocalTable
I32 ipFwdNewCfgLocalIndex	1.3.6.1.4.1.1872.2.5.3.1.4.7.1.1	Integer32	read-only	The index of ipFwdNewCfgLocalTable.
IP ipFwdNewCfgLocalMask	1.3.6.1.4.1.1872.2.5.3.1.4.7.1.3	IpAddress	read-create	The new local IP subnet mask.
IP ipFwdNewCfgLocalSubnet	1.3.6.1.4.1.1872.2.5.3.1.4.7.1.2	IpAddress	read-create	The new local IP subnet.
ipFwdNewCfgLocalTable	1.3.6.1.4.1.1872.2.5.3.1.4.7		not-accessible	The table of local network definition.
INT ipFwdNewCfgNoICMPRedirect	1.3.6.1.4.1.1872.2.5.3.1.4.1.6	INTEGER	read-write	Enable or disable no icmp redirects.
ipFwdNewCfgPortEntry	1.3.6.1.4.1.1872.2.5.3.1.4.4.1		not-accessible	A row in the ipFwdNewCfgPortTable
I32 ipFwdNewCfgPortIndex	1.3.6.1.4.1.1872.2.5.3.1.4.4.1.1	Integer32	read-only	The port number for which the forwarding state information pertains.
INT ipFwdNewCfgPortState	1.3.6.1.4.1.1872.2.5.3.1.4.4.1.2	INTEGER	read-write	The forwarding state of the port.
ipFwdNewCfgPortTable	1.3.6.1.4.1.1872.2.5.3.1.4.4		not-accessible	The table of ports and their forwarding states
INT ipFwdNewCfgRtCache	1.3.6.1.4.1.1872.2.5.3.1.4.1.8	INTEGER	read-write	Enable or disable SP Route Caching.
INT ipFwdNewCfgState	1.3.6.1.4.1.1872.2.5.3.1.4.1.2	INTEGER	read-write	IP forwarding global state.
I32 ipFwdPortTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.4.2	Integer32	read-only	The maximum number of rows in the IP Port table.
ipGatewayCfg	1.3.6.1.4.1.1872.2.5.3.1.2
I32 ipGatewayTableMax	1.3.6.1.4.1.1872.2.5.3.1.2.3	Integer32	read-only	The maximum number of rows in the IP gateway table.
ipGeneralCfg	1.3.6.1.4.1.1872.2.5.3.1.14
ipInterfaceCfg	1.3.6.1.4.1.1872.2.5.3.1.1
I32 ipInterfaceTableMax	1.3.6.1.4.1.1872.2.5.3.1.1.1	Integer32	read-only	The maximum number of rows in the IP interface table.
ipIntfInfo	1.3.6.1.4.1.1872.2.5.3.3.9
ipIntfInfoTable	1.3.6.1.4.1.1872.2.5.3.3.9.1		not-accessible	The table of IP interface information.
INT ipNewCfgAlistAction	1.3.6.1.4.1.1872.2.5.3.1.11.6.1.5	INTEGER	read-create	Action of the route map access list.
INT ipNewCfgAlistDelete	1.3.6.1.4.1.1872.2.5.3.1.11.6.1.7	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgAlistEntry	1.3.6.1.4.1.1872.2.5.3.1.11.6.1		not-accessible	Information about an IP route map.
I32 ipNewCfgAlistIndex	1.3.6.1.4.1.1872.2.5.3.1.11.6.1.2	Integer32	read-only	The access list number for which the access list is related.
U32 ipNewCfgAlistMetric	1.3.6.1.4.1.1872.2.5.3.1.11.6.1.4	Unsigned32	read-create	The metric of the route map access list. 4294967295 means none
INT ipNewCfgAlistNwf	1.3.6.1.4.1.1872.2.5.3.1.11.6.1.3	INTEGER	read-create	The network filter number of the route map access list. 0 means none
I32 ipNewCfgAlistRmapIndex	1.3.6.1.4.1.1872.2.5.3.1.11.6.1.1	Integer32	read-only	The route map number for which the RMAP is related.
INT ipNewCfgAlistState	1.3.6.1.4.1.1872.2.5.3.1.11.6.1.6	INTEGER	read-create	Enable or disable the route map access list.
ipNewCfgAlistTable	1.3.6.1.4.1.1872.2.5.3.1.11.6		not-accessible	The table of IP route map access list configuration in the current_config.
INT ipNewCfgASNumber	1.3.6.1.4.1.1872.2.5.3.1.14.4	INTEGER	read-write	The autonomous system (AS) number.
INT ipNewCfgAspathAction	1.3.6.1.4.1.1872.2.5.3.1.11.9.1.4	INTEGER	read-create	Action of the route map access path.
INT ipNewCfgAspathAS	1.3.6.1.4.1.1872.2.5.3.1.11.9.1.3	INTEGER	read-create	The AS number of the route map access path. 0 means none
INT ipNewCfgAspathDelete	1.3.6.1.4.1.1872.2.5.3.1.11.9.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgAspathEntry	1.3.6.1.4.1.1872.2.5.3.1.11.9.1		not-accessible	Information about an IP route map.
I32 ipNewCfgAspathIndex	1.3.6.1.4.1.1872.2.5.3.1.11.9.1.2	Integer32	read-only	The access path number for which the access list is related.
I32 ipNewCfgAspathRmapIndex	1.3.6.1.4.1.1872.2.5.3.1.11.9.1.1	Integer32	read-only	The route map number for which the RMAP is related.
INT ipNewCfgAspathState	1.3.6.1.4.1.1872.2.5.3.1.11.9.1.5	INTEGER	read-create	Enable or disable the route map access path.
ipNewCfgAspathTable	1.3.6.1.4.1.1872.2.5.3.1.11.9		not-accessible	The table of IP route map access path configuration
IP ipNewCfgBootpAddr	1.3.6.1.4.1.1872.2.5.3.1.8.2	IpAddress	read-write	The IP address of BOOTP server.
IP ipNewCfgBootpAddr2	1.3.6.1.4.1.1872.2.5.3.1.8.4	IpAddress	read-write	The IP address of second BOOTP server.
INT ipNewCfgBootpState	1.3.6.1.4.1.1872.2.5.3.1.8.6	INTEGER	read-write	The state of BOOTP relay.
IP ipNewCfgGwAddr	1.3.6.1.4.1.1872.2.5.3.1.2.5.1.2	IpAddress	read-create	The IP address of the default gateway.
INT ipNewCfgGwArp	1.3.6.1.4.1.1872.2.5.3.1.2.5.1.7	INTEGER	read-create	The state of the ARP only health checks.
INT ipNewCfgGwDelete	1.3.6.1.4.1.1872.2.5.3.1.2.5.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgGwEntry	1.3.6.1.4.1.1872.2.5.3.1.2.5.1		not-accessible	A row in the Ip default gateway table
I32 ipNewCfgGwIndex	1.3.6.1.4.1.1872.2.5.3.1.2.5.1.1	Integer32	read-only	The gateway number for which the information is related.
INT ipNewCfgGwInterval	1.3.6.1.4.1.1872.2.5.3.1.2.5.1.3	INTEGER	read-create	The interval in seconds between ping attempts.
STR ipNewCfgGwIpv6Addr	1.3.6.1.4.1.1872.2.5.3.1.2.5.1.11	DisplayString	read-create	The IPv6 address of the gateway. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
INT ipNewCfgGwIpVer	1.3.6.1.4.1.1872.2.5.3.1.2.5.1.10	INTEGER	read-create	The type of IP address.
INT ipNewCfgGwMetric	1.3.6.1.4.1.1872.2.5.3.1.2.2	INTEGER	read-write	The default gateway metric.
INT ipNewCfgGwPriority	1.3.6.1.4.1.1872.2.5.3.1.2.5.1.9	INTEGER	read-create	The priority of the default route for this gateway. High priority means that the default gateway route will have higher priority over learned default routes. Low priority means that the default gateway route will have lower priority than learned default routes.
INT ipNewCfgGwRetry	1.3.6.1.4.1.1872.2.5.3.1.2.5.1.4	INTEGER	read-create	The number of failed attempts to declare the default gateway DOWN.
INT ipNewCfgGwState	1.3.6.1.4.1.1872.2.5.3.1.2.5.1.5	INTEGER	read-create	The state of the default gateway.
ipNewCfgGwTable	1.3.6.1.4.1.1872.2.5.3.1.2.5		not-accessible	The table of gateway configuration in the new configuration block.
I32 ipNewCfgGwVlan	1.3.6.1.4.1.1872.2.5.3.1.2.5.1.8	Integer32	read-create	The VLAN number for this gateway. The first 4 entries in the table are only used for default gateway load balancing hence the VLAN cannot be specified for the first 4 entries.
IP ipNewCfgIntfAddr	1.3.6.1.4.1.1872.2.5.3.1.1.3.1.2	IpAddress	read-create	The IP address of the interface.
INT ipNewCfgIntfBootpRelay	1.3.6.1.4.1.1872.2.5.3.1.1.3.1.8	INTEGER	read-create	Enable/disable BOOTP relay.
IP ipNewCfgIntfBroadcast	1.3.6.1.4.1.1872.2.5.3.1.1.3.1.4	IpAddress	read-create	The broadcast address of the interface.
INT ipNewCfgIntfDelete	1.3.6.1.4.1.1872.2.5.3.1.1.3.1.7	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgIntfEntry	1.3.6.1.4.1.1872.2.5.3.1.1.3.1		not-accessible	A row in the Ip interface table
I32 ipNewCfgIntfIndex	1.3.6.1.4.1.1872.2.5.3.1.1.3.1.1	Integer32	read-only	The interface number for which the IP information is related.
STR ipNewCfgIntfIpv6Addr	1.3.6.1.4.1.1872.2.5.3.1.1.3.1.11	DisplayString	read-create	The IPv6 address of the interface. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
INT ipNewCfgIntfIpVer	1.3.6.1.4.1.1872.2.5.3.1.1.3.1.10	INTEGER	read-create	The type of IP address.
IP ipNewCfgIntfMask	1.3.6.1.4.1.1872.2.5.3.1.1.3.1.3	IpAddress	read-create	The subnet mask of the interface.
INT ipNewCfgIntfPrefixLen	1.3.6.1.4.1.1872.2.5.3.1.1.3.1.12	INTEGER	read-create	The prefix length associated with this IP address .
INT ipNewCfgIntfRouteAdv	1.3.6.1.4.1.1872.2.5.3.1.1.3.1.13	INTEGER	read-create	Enable/disable route advertisement of the interface.
INT ipNewCfgIntfState	1.3.6.1.4.1.1872.2.5.3.1.1.3.1.6	INTEGER	read-create	The state of the interface.
ipNewCfgIntfTable	1.3.6.1.4.1.1872.2.5.3.1.1.3		not-accessible	The table of interface configuration in the New Configuration Block.
I32 ipNewCfgIntfVlan	1.3.6.1.4.1.1872.2.5.3.1.1.3.1.5	Integer32	read-create	The VLAN associated with the interface.
IP ipNewCfgNwfAddr	1.3.6.1.4.1.1872.2.5.3.1.10.3.1.2	IpAddress	read-create	The IP address of the network filter.
INT ipNewCfgNwfDelete	1.3.6.1.4.1.1872.2.5.3.1.10.3.1.5	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgNwfEntry	1.3.6.1.4.1.1872.2.5.3.1.10.3.1		not-accessible	Information about an IP network filter.
I32 ipNewCfgNwfIndex	1.3.6.1.4.1.1872.2.5.3.1.10.3.1.1	Integer32	read-only	The network filter number for which the NWF is related.
IP ipNewCfgNwfMask	1.3.6.1.4.1.1872.2.5.3.1.10.3.1.3	IpAddress	read-create	The subnet mask of the network filter.
INT ipNewCfgNwfState	1.3.6.1.4.1.1872.2.5.3.1.10.3.1.4	INTEGER	read-create	Enable or disable the network filter.
ipNewCfgNwfTable	1.3.6.1.4.1.1872.2.5.3.1.10.3		not-accessible	The table of IP network filter configuration in the current_config.
STR ipNewCfgRmapAp	1.3.6.1.4.1.1872.2.5.3.1.11.3.1.7	DisplayString	read-create	The as-path prepend of the matched route. Up to 3 AS number can be displayed for the string. The usuage is: [][ ]
INT ipNewCfgRmapDelete	1.3.6.1.4.1.1872.2.5.3.1.11.3.1.9	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgRmapEntry	1.3.6.1.4.1.1872.2.5.3.1.11.3.1		not-accessible	Information about an IP route map.
I32 ipNewCfgRmapIndex	1.3.6.1.4.1.1872.2.5.3.1.11.3.1.1	Integer32	read-only	The route map number for which the RMAP is related.
U32 ipNewCfgRmapLp	1.3.6.1.4.1.1872.2.5.3.1.11.3.1.2	Unsigned32	read-create	The local-preference of the route map. 4294967295 means none
U32 ipNewCfgRmapMetric	1.3.6.1.4.1.1872.2.5.3.1.11.3.1.3	Unsigned32	read-create	The metric of the route map. 4294967295 means none
INT ipNewCfgRmapMetricType	1.3.6.1.4.1.1872.2.5.3.1.11.3.1.8	INTEGER	read-create	The OSPF metric-type of the matched route.
INT ipNewCfgRmapPrec	1.3.6.1.4.1.1872.2.5.3.1.11.3.1.4	INTEGER	read-create	The precedence of the route map.
INT ipNewCfgRmapState	1.3.6.1.4.1.1872.2.5.3.1.11.3.1.6	INTEGER	read-create	Enable or disable the route map.
ipNewCfgRmapTable	1.3.6.1.4.1.1872.2.5.3.1.11.3		not-accessible	The table of IP route map configuration in the current_config.
INT ipNewCfgRmapWeight	1.3.6.1.4.1.1872.2.5.3.1.11.3.1.5	INTEGER	read-create	The weight of the route map. 65535 means none
IP ipNewCfgRouterID	1.3.6.1.4.1.1872.2.5.3.1.14.2	IpAddress	read-write	The router ID of the switch.
INT ipNewCfgStaticArpAction	1.3.6.1.4.1.1872.2.5.3.1.15.3.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ipNewCfgStaticArpEntry	1.3.6.1.4.1.1872.2.5.3.1.15.3.1		not-accessible	A row in the static ARP table
I32 ipNewCfgStaticArpIndx	1.3.6.1.4.1.1872.2.5.3.1.15.3.1.1	Integer32	read-only	The index of the static ARP table.
IP ipNewCfgStaticArpIp	1.3.6.1.4.1.1872.2.5.3.1.15.3.1.2	IpAddress	read-create	The IP address for the ARP entry.
PHY ipNewCfgStaticArpMAC	1.3.6.1.4.1.1872.2.5.3.1.15.3.1.3	PhysAddress	read-create	The MAC address for the ARP entry.
I32 ipNewCfgStaticArpPort	1.3.6.1.4.1.1872.2.5.3.1.15.3.1.5	Integer32	read-create	The port for the ARP entry.
ipNewCfgStaticArpTable	1.3.6.1.4.1.1872.2.5.3.1.15.3		not-accessible	The table of static ARPs in the new configuration block.
I32 ipNewCfgStaticArpVlan	1.3.6.1.4.1.1872.2.5.3.1.15.3.1.4	Integer32	read-create	The VLAN for the ARP entry.
INT ipNewCfgStaticRouteAction	1.3.6.1.4.1.1872.2.5.3.1.3.3.1.5	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
IP ipNewCfgStaticRouteDestIp	1.3.6.1.4.1.1872.2.5.3.1.3.3.1.2	IpAddress	read-create	The destination IP address of this route.
ipNewCfgStaticRouteEntry	1.3.6.1.4.1.1872.2.5.3.1.3.3.1		not-accessible	A row in the static IP route table
IP ipNewCfgStaticRouteGateway	1.3.6.1.4.1.1872.2.5.3.1.3.3.1.4	IpAddress	read-create	The IP address of the gateway for this route.
I32 ipNewCfgStaticRouteIndx	1.3.6.1.4.1.1872.2.5.3.1.3.3.1.1	Integer32	read-only	The index of the static routing table.
I32 ipNewCfgStaticRouteInterface	1.3.6.1.4.1.1872.2.5.3.1.3.3.1.6	Integer32	read-create	The IP interface of this route. The IP address of the specified interface shall be use as source IP when performs routing.
IP ipNewCfgStaticRouteMask	1.3.6.1.4.1.1872.2.5.3.1.3.3.1.3	IpAddress	read-create	The subnet mask of this route.
ipNewCfgStaticRouteTable	1.3.6.1.4.1.1872.2.5.3.1.3.3		not-accessible	The table of static routes in the new configuration block.
ipNwfCfg	1.3.6.1.4.1.1872.2.5.3.1.10
I32 ipNwfTableMax	1.3.6.1.4.1.1872.2.5.3.1.10.1	Integer32	read-only	The maximum number of rows in the IP network filter table.
ipOper	1.3.6.1.4.1.1872.2.5.3.4.2
ipRmapCfg	1.3.6.1.4.1.1872.2.5.3.1.11
I32 ipRmapTableMax	1.3.6.1.4.1.1872.2.5.3.1.11.1	Integer32	read-only	The maximum number of rows in the IP route map table.
ipRoute6Info	1.3.6.1.4.1.1872.2.5.3.3.8
STR ipRoute6InfoDestIp6	1.3.6.1.4.1.1872.2.5.3.3.8.1.1.2	DisplayString	read-only	The destination of the route.
ipRoute6InfoEntry	1.3.6.1.4.1.1872.2.5.3.3.8.1.1		not-accessible	A row in the run-time IP6 route table.
I32 ipRoute6InfoIndx	1.3.6.1.4.1.1872.2.5.3.3.8.1.1.1	Integer32	read-only	The index of this route6 table.
I32 ipRoute6InfoInterface	1.3.6.1.4.1.1872.2.5.3.3.8.1.1.3	Integer32	read-only	The interface of the route.
STR ipRoute6InfoNextHop	1.3.6.1.4.1.1872.2.5.3.3.8.1.1.4	DisplayString	read-only	The next hop of the route.
INT ipRoute6InfoProto	1.3.6.1.4.1.1872.2.5.3.3.8.1.1.5	INTEGER	read-only	The protocol type of the route.
ipRoute6InfoTable	1.3.6.1.4.1.1872.2.5.3.3.8.1		not-accessible	The table of run-time IP6 routes.
IP ipRouteInfoDestIp	1.3.6.1.4.1.1872.2.5.3.3.1.1.1.2	IpAddress	read-only	The destination IP address of this route.
ipRouteInfoEntry	1.3.6.1.4.1.1872.2.5.3.3.1.1.1		not-accessible	A row in the run-time IP route table
IP ipRouteInfoGateway	1.3.6.1.4.1.1872.2.5.3.3.1.1.1.4	IpAddress	read-only	The next-hop router address for this route.
IP ipRouteInfoGateway1	1.3.6.1.4.1.1872.2.5.3.3.1.1.1.8	IpAddress	read-only	The next-hop router address for this route.
IP ipRouteInfoGateway2	1.3.6.1.4.1.1872.2.5.3.3.1.1.1.9	IpAddress	read-only	The next-hop router address for this route.
I32 ipRouteInfoIndx	1.3.6.1.4.1.1872.2.5.3.3.1.1.1.1	Integer32	read-only	The index of this route table.
I32 ipRouteInfoInterface	1.3.6.1.4.1.1872.2.5.3.3.1.1.1.7	Integer32	read-only	The interface number for which the destination address is applicable.
IP ipRouteInfoMask	1.3.6.1.4.1.1872.2.5.3.3.1.1.1.3	IpAddress	read-only	The destination IP mask of this route.
I32 ipRouteInfoMetric	1.3.6.1.4.1.1872.2.5.3.3.1.1.1.10	Integer32	read-only	The Metric for this route.
ipRouteInfoTable	1.3.6.1.4.1.1872.2.5.3.3.1.1		not-accessible	The table of run-time IP routes.
INT ipRouteInfoTag	1.3.6.1.4.1.1872.2.5.3.3.1.1.1.5	INTEGER	read-only	The tag-type for this route.
INT ipRouteInfoType	1.3.6.1.4.1.1872.2.5.3.3.1.1.1.6	INTEGER	read-only	The type of the route.
ipRoutingInfo	1.3.6.1.4.1.1872.2.5.3.3.1
ipStaticArpCfg	1.3.6.1.4.1.1872.2.5.3.1.15
I32 ipStaticArpTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.15.1	Integer32	read-only	The maximum number of rows in the Static ARP table.
I32 ipStaticArpTableNextAvailableIndex	1.3.6.1.4.1.1872.2.5.3.1.15.4	Integer32	read-only	The next available index in the Static ARP table.
ipStaticRouteCfg	1.3.6.1.4.1.1872.2.5.3.1.3
I32 ipStaticRouteTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.3.1	Integer32	read-only	The maximum number of rows in the Static Route table.
STR ipv6CurCfgStaticRouteDestIp	1.3.6.1.4.1.1872.2.5.3.1.3.4.1.2	DisplayString	read-only	The destination IPv6 address of this route. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
ipv6CurCfgStaticRouteEntry	1.3.6.1.4.1.1872.2.5.3.1.3.4.1		not-accessible	A row in the static IP route table
STR ipv6CurCfgStaticRouteGateway	1.3.6.1.4.1.1872.2.5.3.1.3.4.1.4	DisplayString	read-only	The destination IPv6 gateway address of this route. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
I32 ipv6CurCfgStaticRouteIndx	1.3.6.1.4.1.1872.2.5.3.1.3.4.1.1	Integer32	read-only	The index of the ipv6 static routing table.
I32 ipv6CurCfgStaticRouteInterface	1.3.6.1.4.1.1872.2.5.3.1.3.4.1.5	Integer32	read-only	The IPv6 interface of this route. The IPv6 address of the specified interface shall be use as source IP when performs routing.
I32 ipv6CurCfgStaticRouteMask	1.3.6.1.4.1.1872.2.5.3.1.3.4.1.3	Integer32	read-only	The prefix length associated with this IP address.
ipv6CurCfgStaticRouteTable	1.3.6.1.4.1.1872.2.5.3.1.3.4		not-accessible	The table of ipv6 static routes in the current configuration block.
INT ipv6NewCfgStaticRouteAction	1.3.6.1.4.1.1872.2.5.3.1.3.5.1.5	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
STR ipv6NewCfgStaticRouteDestIp	1.3.6.1.4.1.1872.2.5.3.1.3.5.1.2	DisplayString	read-create	The destination IPv6 address of this route. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
ipv6NewCfgStaticRouteEntry	1.3.6.1.4.1.1872.2.5.3.1.3.5.1		not-accessible	A row in the static IP route table
STR ipv6NewCfgStaticRouteGateway	1.3.6.1.4.1.1872.2.5.3.1.3.5.1.4	DisplayString	read-create	The destination IPv6 gateway address of this route. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
I32 ipv6NewCfgStaticRouteIndx	1.3.6.1.4.1.1872.2.5.3.1.3.5.1.1	Integer32	read-create	The index of the ipv6 static routing table.
I32 ipv6NewCfgStaticRouteInterface	1.3.6.1.4.1.1872.2.5.3.1.3.5.1.6	Integer32	read-create	The IPv6 interface of this route. The IPv6 address of the specified interface shall be use as source IP when performs routing.
I32 ipv6NewCfgStaticRouteMask	1.3.6.1.4.1.1872.2.5.3.1.3.5.1.3	Integer32	read-create	The prefix length associated with this IP address.
ipv6NewCfgStaticRouteTable	1.3.6.1.4.1.1872.2.5.3.1.3.5		not-accessible	The table of ipv6 static routes in the current configuration block.
layer3	1.3.6.1.4.1.1872.2.5.3			The MIB module for the Alteon OS Layer 3 configuration, statistics and information .
layer3Configs	1.3.6.1.4.1.1872.2.5.3.1
layer3Info	1.3.6.1.4.1.1872.2.5.3.3
layer3Oper	1.3.6.1.4.1.1872.2.5.3.4
layer3Stats	1.3.6.1.4.1.1872.2.5.3.2
INT nbrcacheClear	1.3.6.1.4.1.1872.2.5.3.3.7.2	INTEGER	read-write	Setting this value to clear(2) clears the Nbr cache, When read ok(1) is returned.
nbrcacheInfo	1.3.6.1.4.1.1872.2.5.3.3.7
STR nbrcacheInfoDestIp	1.3.6.1.4.1.1872.2.5.3.3.7.1.1.2	DisplayString	read-only	The destination IP address of the nbrcache entry.
nbrcacheInfoEntry	1.3.6.1.4.1.1872.2.5.3.3.7.1.1		not-accessible	Information about neighbour discovery protocol.
I32 nbrcacheInfoIndex	1.3.6.1.4.1.1872.2.5.3.3.7.1.1.1	Integer32	read-only	The index of the nbrcache entry.
PHY nbrcacheInfoMacAddr	1.3.6.1.4.1.1872.2.5.3.3.7.1.1.5	PhysAddress	read-only	The MAC address for the nbrcache entry.
I32 nbrcacheInfoPortNum	1.3.6.1.4.1.1872.2.5.3.3.7.1.1.7	Integer32	read-only	The port number on which this entry's equivalence is effective.
INT nbrcacheInfoState	1.3.6.1.4.1.1872.2.5.3.3.7.1.1.3	INTEGER	read-only	The state of the nbrcache entry.
nbrcacheInfoTable	1.3.6.1.4.1.1872.2.5.3.3.7.1		not-accessible	The table of nbrcache information.
I32 nbrcacheInfoTotDynamicEntries	1.3.6.1.4.1.1872.2.5.3.3.7.3	Integer32	read-only	The total number of dynamic neighbour cache entries.
I32 nbrcacheInfoTotLocalEntries	1.3.6.1.4.1.1872.2.5.3.3.7.4	Integer32	read-only	The total number of local neighbour cache entries.
I32 nbrcacheInfoTotOtherEntries	1.3.6.1.4.1.1872.2.5.3.3.7.5	Integer32	read-only	The total number of other neighbour cache entries.
INT nbrcacheInfoType	1.3.6.1.4.1.1872.2.5.3.3.7.1.1.4	INTEGER	read-only	The type of the nbrcache entry.
I32 nbrcacheInfoVlanId	1.3.6.1.4.1.1872.2.5.3.3.7.1.1.6	Integer32	read-only	The VLAN identifier for the nbrcache entry.
ospfArea	1.3.6.1.4.1.1872.2.5.3.2.6.2
ospfAreaChangeStats	1.3.6.1.4.1.1872.2.5.3.2.6.2.3		not-accessible	The table of OSPF Area Change Statistics.
ospfAreaChangeStatsEntry	1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1		not-accessible	Area Change Statistics about a OSPF area.
C32 ospfAreaErrAuthFailure	1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.2	Counter32	read-only	The total number of packets received with a wrong password in this area.
C32 ospfAreaErrDeadMismatch	1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.5	Counter32	read-only	The total number of packets received with a different dead interval in this area.
C32 ospfAreaErrHelloMismatch	1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.4	Counter32	read-only	The total number of packets received with a different hello interval in this area.
I32 ospfAreaErrIndex	1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.1	Integer32	read-only	The index of the OSPF Area for which these statistics apply.
C32 ospfAreaErrNetmaskMismatch	1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.3	Counter32	read-only	The total number of packets received with a wrong netmask in this area.
C32 ospfAreaErrOptionsMismatch	1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.6	Counter32	read-only	The total number of packets received with a different options in this area.
ospfAreaErrorStats	1.3.6.1.4.1.1872.2.5.3.2.6.2.4		not-accessible	The table of OSPF Area Error Statistics.
ospfAreaErrorStatsEntry	1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1		not-accessible	Error Statistics for an OSPF area.
C32 ospfAreaErrUnknownNbr	1.3.6.1.4.1.1872.2.5.3.2.6.2.4.1.7	Counter32	read-only	The total number of packets received from an unknown neighbour in this area.
ospfAreaInfoEntry	1.3.6.1.4.1.1872.2.5.3.3.4.2.1		not-accessible	Information about a OSPF area.
IP ospfAreaInfoId	1.3.6.1.4.1.1872.2.5.3.3.4.2.1.5	IpAddress	read-only	The IP address of the OSPF area.
I32 ospfAreaInfoIndex	1.3.6.1.4.1.1872.2.5.3.3.4.2.1.1	Integer32	read-only	The OSPF area number for which the OSPF info table is related.
ospfAreaInfoTable	1.3.6.1.4.1.1872.2.5.3.3.4.2		not-accessible	The table of OSPF Area information.
C32 ospfAreaIntfBackup	1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.7	Counter32	read-only	The total number of Backup Designated Routers on the attatched network for this OSPF area.
C32 ospfAreaIntfDown	1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.3	Counter32	read-only	The total number of interfaces down in this OSPF area.
C32 ospfAreaIntfHello	1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.2	Counter32	read-only	The total number of Hello packets sent on this OSPF area.
I32 ospfAreaIntfIndex	1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.1	Integer32	read-only	The index of the OSPF Area for which these statistics apply.
C32 ospfAreaIntfLoop	1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.4	Counter32	read-only	The total number of interfaces no longer connected to the attatched network in this OSPF area.
C32 ospfAreaIntfNbrChange	1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.8	Counter32	read-only	The total number of changes in the set of bidirectional neighbours associated with the interface in this OSPF area.
C32 ospfAreaIntfUnloop	1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.5	Counter32	read-only	The total number of interfaces connected to the attatched network in this OSPF area..
C32 ospfAreaIntfWaitTimer	1.3.6.1.4.1.1872.2.5.3.2.6.2.3.1.6	Counter32	read-only	The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF area.
C32 ospfAreaNbrAdjointOk	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.4	Counter32	read-only	The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF area.
C32 ospfAreaNbrBadRequests	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.7	Counter32	read-only	The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across this OSPF area.
C32 ospfAreaNbrBadSequence	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.8	Counter32	read-only	The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this OSPF area.
ospfAreaNbrChangeStats	1.3.6.1.4.1.1872.2.5.3.2.6.2.2		not-accessible	The table of OSPF Area Neighbour Statistics.
ospfAreaNbrChangeStatsEntry	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1		not-accessible	Area Neighbour Change Statistics about a OSPF area.
C32 ospfAreaNbrDown	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.12	Counter32	read-only	The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) in this OSPF area.
C32 ospfAreaNbrExchangeDone	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.6	Counter32	read-only	The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF area.
C32 ospfAreaNbrhello	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.2	Counter32	read-only	The total number of Hello packets received from neighbours in this OSPF area.
I32 ospfAreaNbrIndex	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.1	Integer32	read-only	The index of the ospf Area for which these statistics apply.
C32 ospfAreaNbrLoadingDone	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.9	Counter32	read-only	The total number of link state updates received for all out-of-date portions of the database in this OSPF area.
C32 ospfAreaNbrN1way	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.10	Counter32	read-only	The total number of Hello packets received from neighbours, in which this router is not mentioned in this OSPF area.
C32 ospfAreaNbrN2way	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.13	Counter32	read-only	The total number of Hello packets received from neighbours, in which this router is mentioned in this OSPF area.
C32 ospfAreaNbrNegotiationDone	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.5	Counter32	read-only	The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF area.
C32 ospfAreaNbrRstAd	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.11	Counter32	read-only	The total number of times the Neighbour adjacency has been reset across this OPSF area.
C32 ospfAreaNbrStart	1.3.6.1.4.1.1872.2.5.3.2.6.2.2.1.3	Counter32	read-only	The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF area.
C32 ospfAreaRxDatabase	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.6	Counter32	read-only	The total number of Database Description packets transmitted for this OSPF area.
C32 ospfAreaRxHello	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.4	Counter32	read-only	The total number of Hello packets received in this OSPF area.
C32 ospfAreaRxlsAcks	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.10	Counter32	read-only	The total number of Link State Acknowledgement packets received for this OSPF area.
C32 ospfAreaRxlsReqs	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.8	Counter32	read-only	The total number of Link State Request packets received for this OSPF area.
C32 ospfAreaRxlsUpdates	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.12	Counter32	read-only	The total number of Link State Update packets received for this OSPF area.
C32 ospfAreaRxPkts	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.2	Counter32	read-only	The total number of OSPF packets received in this OSPF area.
I32 ospfAreaRxTxIndex	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.1	Integer32	read-only	The index of the ospf Area for which these statistics apply.
ospfAreaRxTxStats	1.3.6.1.4.1.1872.2.5.3.2.6.2.1		not-accessible	The table of OSPF Area Rx/Tx Statistics.
ospfAreaRxTxStatsEntry	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1		not-accessible	Rx Tx packet Statistics about a OSPF area.
I32 ospfAreaTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.13.1.6	Integer32	read-only	The maximum number of rows in the OSPF Area table.
C32 ospfAreaTxDatabase	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.7	Counter32	read-only	The total number of Database Description packets transmitted for this OSPF area.
C32 ospfAreaTxHello	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.5	Counter32	read-only	The total number of Hello packets transmitted in this OSPF area.
C32 ospfAreaTxlsAcks	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.11	Counter32	read-only	The total number of Link State Acknowledgement packets transmitted for this OSPF area.
C32 ospfAreaTxlsReqs	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.9	Counter32	read-only	The total number of Link State Request packets transmitted for this OSPF area.
C32 ospfAreaTxlsUpdates	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.13	Counter32	read-only	The total number of Link State Update packets transmitted for this OSPF area.
C32 ospfAreaTxPkts	1.3.6.1.4.1.1872.2.5.3.2.6.2.1.1.3	Counter32	read-only	The total number of OSPF packets transmitted in this OSPF area.
ospfCfg	1.3.6.1.4.1.1872.2.5.3.1.13
C32 ospfCumIntfBackup	1.3.6.1.4.1.1872.2.5.3.2.6.1.3.6	Counter32	read-only	The sum total number of Backup Designated Routers on the attatched network for all OSPF areas and interfaces.
ospfCumIntfChangeStats	1.3.6.1.4.1.1872.2.5.3.2.6.1.3
C32 ospfCumIntfDown	1.3.6.1.4.1.1872.2.5.3.2.6.1.3.2	Counter32	read-only	The sum total number of interfaces down in all OSPF areas.
C32 ospfCumIntfHello	1.3.6.1.4.1.1872.2.5.3.2.6.1.3.1	Counter32	read-only	The sum total number of Hello packets sent on all interfaces and areas
C32 ospfCumIntfLoop	1.3.6.1.4.1.1872.2.5.3.2.6.1.3.3	Counter32	read-only	The sum total of interfaces no longer connected to the attatched network across all OSPF areas and interfaces.
C32 ospfCumIntfNbrChange	1.3.6.1.4.1.1872.2.5.3.2.6.1.3.7	Counter32	read-only	The sum total number of changes in the set of bidirectional neighbours associated with any interface across all OSPF areas.
C32 ospfCumIntfUnloop	1.3.6.1.4.1.1872.2.5.3.2.6.1.3.4	Counter32	read-only	The sum total number of interfaces, connected to the attatched network in all OSPF areas.
C32 ospfCumIntfWaitTimer	1.3.6.1.4.1.1872.2.5.3.2.6.1.3.5	Counter32	read-only	The sum total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) across all OSPF areas and interfaces.
C32 ospfCumNbrAdjointOk	1.3.6.1.4.1.1872.2.5.3.2.6.1.2.3	Counter32	read-only	The sum total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour across all OSPF areas and interfaces.
C32 ospfCumNbrBadRequests	1.3.6.1.4.1.1872.2.5.3.2.6.1.2.6	Counter32	read-only	The sum total number of Link State Requests which have been received for a link state advertisement not contained in the database across all interfaces and OSPF areas.
C32 ospfCumNbrBadSequence	1.3.6.1.4.1.1872.2.5.3.2.6.1.2.7	Counter32	read-only	The sum total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for all OSPF areas and interfaces.
ospfCumNbrChangeStats	1.3.6.1.4.1.1872.2.5.3.2.6.1.2
C32 ospfCumNbrDown	1.3.6.1.4.1.1872.2.5.3.2.6.1.2.11	Counter32	read-only	The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) across all OSPF areas and interfaces.
C32 ospfCumNbrExchangeDone	1.3.6.1.4.1.1872.2.5.3.2.6.1.2.5	Counter32	read-only	The sum total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, across all OSPF areas and interfaces.
C32 ospfCumNbrhello	1.3.6.1.4.1.1872.2.5.3.2.6.1.2.1	Counter32	read-only	The sum total of all Hello packets received from neighbours on all OSPF areas and interfaces.
C32 ospfCumNbrLoadingDone	1.3.6.1.4.1.1872.2.5.3.2.6.1.2.8	Counter32	read-only	The sum total number of link state updates received for all out-of-date portions of the database across all OSPF areas and interfaces.
C32 ospfCumNbrN1way	1.3.6.1.4.1.1872.2.5.3.2.6.1.2.9	Counter32	read-only	The sum total number of Hello packets received from neighbours, in which this router is not mentioned across all OSPF interfaces and areas.
C32 ospfCumNbrN2way	1.3.6.1.4.1.1872.2.5.3.2.6.1.2.12	Counter32	read-only	The sum total number of Hello packets received from neighbours, in which this router is mentioned across all OSPF interfaces and areas.
C32 ospfCumNbrNegotiationDone	1.3.6.1.4.1.1872.2.5.3.2.6.1.2.4	Counter32	read-only	The sum total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, across all OSPF areas and interfaces.
C32 ospfCumNbrRstAd	1.3.6.1.4.1.1872.2.5.3.2.6.1.2.10	Counter32	read-only	The sum total number of times the Neighbour adjacency has been reset across all OPSF areas and interfaces.
C32 ospfCumNbrStart	1.3.6.1.4.1.1872.2.5.3.2.6.1.2.2	Counter32	read-only	The sum total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) across all OSPF areas and interfaces.
C32 ospfCumRxDatabase	1.3.6.1.4.1.1872.2.5.3.2.6.1.1.5	Counter32	read-only	The sum total of all Database Description packets received on all OSPF areas and interfaces.
C32 ospfCumRxHello	1.3.6.1.4.1.1872.2.5.3.2.6.1.1.3	Counter32	read-only	The sum total of all Hello packets received on all OSPF areas and interfaces.
C32 ospfCumRxlsAcks	1.3.6.1.4.1.1872.2.5.3.2.6.1.1.9	Counter32	read-only	The sum total of all Link State Acknowledgement packets received on all OSPF areas and interfaces.
C32 ospfCumRxlsReqs	1.3.6.1.4.1.1872.2.5.3.2.6.1.1.7	Counter32	read-only	The sum total of all Link State Request packets received on all OSPF areas and interfaces.
C32 ospfCumRxlsUpdates	1.3.6.1.4.1.1872.2.5.3.2.6.1.1.11	Counter32	read-only	The sum total of all Link State Update packets received on all OSPF areas and interfaces.
C32 ospfCumRxPkts	1.3.6.1.4.1.1872.2.5.3.2.6.1.1.1	Counter32	read-only	The sum total of all OSPF packets received on all OSPF areas and interfaces.
ospfCumRxTxStats	1.3.6.1.4.1.1872.2.5.3.2.6.1.1
C32 ospfCumTxDatabase	1.3.6.1.4.1.1872.2.5.3.2.6.1.1.6	Counter32	read-only	The sum total of all Database Description packets transmitted on all OSPF areas and interfaces.
C32 ospfCumTxHello	1.3.6.1.4.1.1872.2.5.3.2.6.1.1.4	Counter32	read-only	The sum total of all Hello packets transmitted on all OSPF areas and interfaces.
C32 ospfCumTxlsAcks	1.3.6.1.4.1.1872.2.5.3.2.6.1.1.10	Counter32	read-only	The sum total of all Link State Acknowledgement packets transmitted on all OSPF areas and interfaces.
C32 ospfCumTxlsReqs	1.3.6.1.4.1.1872.2.5.3.2.6.1.1.8	Counter32	read-only	The sum total of all Link State Request packets transmitted on all OSPF areas and interfaces.
C32 ospfCumTxlsUpdates	1.3.6.1.4.1.1872.2.5.3.2.6.1.1.12	Counter32	read-only	The sum total of all Link State Update packets transmitted on all OSPF areas and interfaces.
C32 ospfCumTxPkts	1.3.6.1.4.1.1872.2.5.3.2.6.1.1.2	Counter32	read-only	The sum total of all OSPF packets transmitted on all OSPF areas and interfaces.
INT ospfCurCfgAreaAuthType	1.3.6.1.4.1.1872.2.5.3.1.13.2.1.4	INTEGER	read-only	Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
ospfCurCfgAreaEntry	1.3.6.1.4.1.1872.2.5.3.1.13.2.1		not-accessible	Information about a OSPF area.
IP ospfCurCfgAreaId	1.3.6.1.4.1.1872.2.5.3.1.13.2.1.2	IpAddress	read-only	The IP Address of the OSPF area.
I32 ospfCurCfgAreaIndex	1.3.6.1.4.1.1872.2.5.3.1.13.2.1.1	Integer32	read-only	The OSPF area number for which the OSPF area table is related.
INT ospfCurCfgAreaMetric	1.3.6.1.4.1.1872.2.5.3.1.13.2.1.6	INTEGER	read-only	The Stub area metric for the OSPF area.
INT ospfCurCfgAreaSpfInterval	1.3.6.1.4.1.1872.2.5.3.1.13.2.1.3	INTEGER	read-only	The SPF interval for the OSPF area.
INT ospfCurCfgAreaState	1.3.6.1.4.1.1872.2.5.3.1.13.2.1.7	INTEGER	read-only	Globally turn OSPF on or off.
ospfCurCfgAreaTable	1.3.6.1.4.1.1872.2.5.3.1.13.2		not-accessible	The table of OSPF Area configuration in the current_config.
INT ospfCurCfgAreaType	1.3.6.1.4.1.1872.2.5.3.1.13.2.1.5	INTEGER	read-only	Type of area being used.
INT ospfCurCfgDefaultRouteMetric	1.3.6.1.4.1.1872.2.5.3.1.13.1.1	INTEGER	read-only	Specify the metric to be assigned.
INT ospfCurCfgDefaultRouteMetricType	1.3.6.1.4.1.1872.2.5.3.1.13.1.3	INTEGER	read-only	Specify the AS External metric type to be assigned.
INT ospfCurCfgEbgpMetric	1.3.6.1.4.1.1872.2.5.3.1.13.4.2.1	INTEGER	read-only	The export metric to be assigned to External BGP routes. A value of 0 indicates none.
INT ospfCurCfgEbgpMetricType	1.3.6.1.4.1.1872.2.5.3.1.13.4.2.3	INTEGER	read-only	The AS External metric type for External BGP routes.
OCT ospfCurCfgEbgpOutRmapList	1.3.6.1.4.1.1872.2.5.3.1.13.4.2.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
INT ospfCurCfgFixedMetric	1.3.6.1.4.1.1872.2.5.3.1.13.4.4.1	INTEGER	read-only	The export metric for fixed routes. A value of 0 indicates none
INT ospfCurCfgFixedMetricType	1.3.6.1.4.1.1872.2.5.3.1.13.4.4.3	INTEGER	read-only	The AS External metric type for fixed routes.
OCT ospfCurCfgFixedOutRmapList	1.3.6.1.4.1.1872.2.5.3.1.13.4.4.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfCurCfgHostAreaIndex	1.3.6.1.4.1.1872.2.5.3.1.13.12.1.3	Integer32	read-only	The area index.
INT ospfCurCfgHostCost	1.3.6.1.4.1.1872.2.5.3.1.13.12.1.4	INTEGER	read-only	Cost of the host entry.
ospfCurCfgHostEntry	1.3.6.1.4.1.1872.2.5.3.1.13.12.1		not-accessible	Information about a OSPF host.
I32 ospfCurCfgHostIndex	1.3.6.1.4.1.1872.2.5.3.1.13.12.1.1	Integer32	read-only	The OSPF host number for which the OSPF host table is related.
IP ospfCurCfgHostIpAddr	1.3.6.1.4.1.1872.2.5.3.1.13.12.1.2	IpAddress	read-only	The IP Address of the OSPF host.
INT ospfCurCfgHostState	1.3.6.1.4.1.1872.2.5.3.1.13.12.1.5	INTEGER	read-only	Enable or disable Host Entry.
ospfCurCfgHostTable	1.3.6.1.4.1.1872.2.5.3.1.13.12		not-accessible	The table of OSPF Host configuration.
INT ospfCurCfgIbgpMetric	1.3.6.1.4.1.1872.2.5.3.1.13.4.3.1	INTEGER	read-only	The export metric for Internal BGP routes. A value of 0 indicates none.
INT ospfCurCfgIbgpMetricType	1.3.6.1.4.1.1872.2.5.3.1.13.4.3.3	INTEGER	read-only	The AS External metric type for Internal BGP routes.
OCT ospfCurCfgIbgpOutRmapList	1.3.6.1.4.1.1872.2.5.3.1.13.4.3.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
INT ospfCurCfgIntfAreaId	1.3.6.1.4.1.1872.2.5.3.1.13.7.1.4	INTEGER	read-only	Specify Area Index.
INT ospfCurCfgIntfCost	1.3.6.1.4.1.1872.2.5.3.1.13.7.1.6	INTEGER	read-only	Interface Cost.
INT ospfCurCfgIntfDead	1.3.6.1.4.1.1872.2.5.3.1.13.7.1.8	INTEGER	read-only	Dead interval in seconds.
ospfCurCfgIntfEntry	1.3.6.1.4.1.1872.2.5.3.1.13.7.1		not-accessible	Information about an OSPF Interface.
INT ospfCurCfgIntfHello	1.3.6.1.4.1.1872.2.5.3.1.13.7.1.7	INTEGER	read-only	Hello interval in seconds.
IP ospfCurCfgIntfId	1.3.6.1.4.1.1872.2.5.3.1.13.7.1.2	IpAddress	read-only	The IP Address of the OSPF interface.
I32 ospfCurCfgIntfIndex	1.3.6.1.4.1.1872.2.5.3.1.13.7.1.1	Integer32	read-only	The OSPF Interface number for which the OSPF Interface table is related.
STR ospfCurCfgIntfKey	1.3.6.1.4.1.1872.2.5.3.1.13.7.1.11	DisplayString	read-only	Specify Authentication Key.
INT ospfCurCfgIntfMdkey	1.3.6.1.4.1.1872.2.5.3.1.13.7.1.3	INTEGER	read-only	The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
INT ospfCurCfgIntfPriority	1.3.6.1.4.1.1872.2.5.3.1.13.7.1.5	INTEGER	read-only	Specify interface router priority.
INT ospfCurCfgIntfRetrans	1.3.6.1.4.1.1872.2.5.3.1.13.7.1.10	INTEGER	read-only	Retransmit interval in seconds.
INT ospfCurCfgIntfState	1.3.6.1.4.1.1872.2.5.3.1.13.7.1.12	INTEGER	read-only	Enable or disable OSPF Interface.
ospfCurCfgIntfTable	1.3.6.1.4.1.1872.2.5.3.1.13.7		not-accessible	The table of OSPF Interface configuration in the current_config.
INT ospfCurCfgIntfTransit	1.3.6.1.4.1.1872.2.5.3.1.13.7.1.9	INTEGER	read-only	Transit delay in seconds.
INT ospfCurCfgLsdb	1.3.6.1.4.1.1872.2.5.3.1.13.1.12	INTEGER	read-only	Specify the LSDB limit for external LSA.
ospfCurCfgMdkeyEntry	1.3.6.1.4.1.1872.2.5.3.1.13.5.1		not-accessible	Information about an OSPF MD keys table.
I32 ospfCurCfgMdkeyIndex	1.3.6.1.4.1.1872.2.5.3.1.13.5.1.1	Integer32	read-only	The OSPF MD5 Key number for which the OSPF MdKey table is related.
STR ospfCurCfgMdkeyKey	1.3.6.1.4.1.1872.2.5.3.1.13.5.1.2	DisplayString	read-only	The character string representing the MD5 Key.
ospfCurCfgMdkeyTable	1.3.6.1.4.1.1872.2.5.3.1.13.5		not-accessible	The table of OSPF MD5 keys in the current_config.
IP ospfCurCfgRangeAddr	1.3.6.1.4.1.1872.2.5.3.1.13.14.1.2	IpAddress	read-only	The IP Address of the range.
I32 ospfCurCfgRangeAreaIndex	1.3.6.1.4.1.1872.2.5.3.1.13.14.1.4	Integer32	read-only	The area index.
ospfCurCfgRangeEntry	1.3.6.1.4.1.1872.2.5.3.1.13.14.1		not-accessible	Information about an OSPF summary range.
INT ospfCurCfgRangeHideState	1.3.6.1.4.1.1872.2.5.3.1.13.14.1.5	INTEGER	read-only	The state of the hide range.
I32 ospfCurCfgRangeIndex	1.3.6.1.4.1.1872.2.5.3.1.13.14.1.1	Integer32	read-only	The range number for which the OSPF summary range table is related.
IP ospfCurCfgRangeMask	1.3.6.1.4.1.1872.2.5.3.1.13.14.1.3	IpAddress	read-only	The mask of the range.
INT ospfCurCfgRangeState	1.3.6.1.4.1.1872.2.5.3.1.13.14.1.6	INTEGER	read-only	The state of the range.
ospfCurCfgRangeTable	1.3.6.1.4.1.1872.2.5.3.1.13.14		not-accessible	The table of OSPF summary range in the current configuration.
INT ospfCurCfgRipMetric	1.3.6.1.4.1.1872.2.5.3.1.13.4.5.1	INTEGER	read-only	The export metric for RIP routes. A value of 0 indicates none
INT ospfCurCfgRipMetricType	1.3.6.1.4.1.1872.2.5.3.1.13.4.5.3	INTEGER	read-only	The AS External metric type for RIP routes.
OCT ospfCurCfgRipOutRmapList	1.3.6.1.4.1.1872.2.5.3.1.13.4.5.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
INT ospfCurCfgState	1.3.6.1.4.1.1872.2.5.3.1.13.1.10	INTEGER	read-only	OSPF global state.
INT ospfCurCfgStaticMetric	1.3.6.1.4.1.1872.2.5.3.1.13.4.1.1	INTEGER	read-only	The metric to be assigned to static routes. A value of 0 indicates none.
INT ospfCurCfgStaticMetricType	1.3.6.1.4.1.1872.2.5.3.1.13.4.1.3	INTEGER	read-only	The AS External metric type for static routes.
OCT ospfCurCfgStaticOutRmapList	1.3.6.1.4.1.1872.2.5.3.1.13.4.1.5	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
INT ospfCurCfgVirtIntfAreaId	1.3.6.1.4.1.1872.2.5.3.1.13.9.1.2	INTEGER	read-only	The OSPF Area Id.
INT ospfCurCfgVirtIntfDead	1.3.6.1.4.1.1872.2.5.3.1.13.9.1.6	INTEGER	read-only	Dead interval in seconds.
ospfCurCfgVirtIntfEntry	1.3.6.1.4.1.1872.2.5.3.1.13.9.1		not-accessible	Information about an OSPF virtual Interface.
INT ospfCurCfgVirtIntfHello	1.3.6.1.4.1.1872.2.5.3.1.13.9.1.5	INTEGER	read-only	Hello interval in seconds.
I32 ospfCurCfgVirtIntfIndex	1.3.6.1.4.1.1872.2.5.3.1.13.9.1.1	Integer32	read-only	The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
STR ospfCurCfgVirtIntfKey	1.3.6.1.4.1.1872.2.5.3.1.13.9.1.9	DisplayString	read-only	Specify Authentication Key.
INT ospfCurCfgVirtIntfMdkey	1.3.6.1.4.1.1872.2.5.3.1.13.9.1.4	INTEGER	read-only	The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
IP ospfCurCfgVirtIntfNbr	1.3.6.1.4.1.1872.2.5.3.1.13.9.1.3	IpAddress	read-only	The IP Address of the OSPF neighbour for this virtual interface.
INT ospfCurCfgVirtIntfRetrans	1.3.6.1.4.1.1872.2.5.3.1.13.9.1.8	INTEGER	read-only	Retransmit interval in seconds.
INT ospfCurCfgVirtIntfState	1.3.6.1.4.1.1872.2.5.3.1.13.9.1.10	INTEGER	read-only	Enable or disable OSPF Interface.
ospfCurCfgVirtIntfTable	1.3.6.1.4.1.1872.2.5.3.1.13.9		not-accessible	The table of OSPF Virtual Interface configuration in the current configuration.
INT ospfCurCfgVirtIntfTransit	1.3.6.1.4.1.1872.2.5.3.1.13.9.1.7	INTEGER	read-only	Transit delay in seconds.
ospfGeneral	1.3.6.1.4.1.1872.2.5.3.1.13.1
ospfGeneralInfo	1.3.6.1.4.1.1872.2.5.3.3.4.1
ospfGeneralStats	1.3.6.1.4.1.1872.2.5.3.2.6.1
I32 ospfHostTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.13.1.9	Integer32	read-only	The maximum number of rows in the OSPF Host table.
IP ospfIfBackupDesignatedRouterIP	1.3.6.1.4.1.1872.2.5.3.3.4.3.1.3	IpAddress	read-only	The OSPF Backup Designated Router ID (IP Address) for this OSPF interface.
IP ospfIfDesignatedRouterIP	1.3.6.1.4.1.1872.2.5.3.3.4.3.1.2	IpAddress	read-only	The OSPF Designated Router ID (IP Address) for this OSPF interface.
I32 ospfIfInfoIndex	1.3.6.1.4.1.1872.2.5.3.3.4.3.1.1	Integer32	read-only	The OSPF interface number for which the OSPF info table is related.
IP ospfIfInfoIpAddress	1.3.6.1.4.1.1872.2.5.3.3.4.3.1.6	IpAddress	read-only	The IP address of the OSPF interface.
IP ospfIfNbrBackupDesignatedRtr	1.3.6.1.4.1.1872.2.5.3.3.4.5.1.6	IpAddress	read-only	The IP Address of the backup designated Router for this OSPF Neighbour.
IP ospfIfNbrDesignatedRtr	1.3.6.1.4.1.1872.2.5.3.3.4.5.1.5	IpAddress	read-only	The IP Address of the Designated Router for this OSPF Neighbour.
ospfIfNbrEntry	1.3.6.1.4.1.1872.2.5.3.3.4.5.1		not-accessible	Information about a OSPF interface, neighbour pair.
I32 ospfIfNbrIntfIndex	1.3.6.1.4.1.1872.2.5.3.3.4.5.1.1	Integer32	read-only	The OSPF Interface number for which this Interface/Nbr table is related.
IP ospfIfNbrIpAddr	1.3.6.1.4.1.1872.2.5.3.3.4.5.1.2	IpAddress	read-only	The OSPF Neighbour ID .
IP ospfIfNbrIpAddress	1.3.6.1.4.1.1872.2.5.3.3.4.5.1.7	IpAddress	read-only	The IP Address of the OSPF Neighbour.
I32 ospfIfNbrPriority	1.3.6.1.4.1.1872.2.5.3.3.4.5.1.3	Integer32	read-only	The priority of the OSPF neighbour.
INT ospfIfNbrState	1.3.6.1.4.1.1872.2.5.3.3.4.5.1.4	INTEGER	read-only	The state of the OSPF neighbour.
ospfIfNbrTable	1.3.6.1.4.1.1872.2.5.3.3.4.5		not-accessible	The table of OSPF Interface Neighbour information.
I32 ospfIfTotalNeighbours	1.3.6.1.4.1.1872.2.5.3.3.4.3.1.5	Integer32	read-only	The Total number of neighbours for this OSPF interface.
I32 ospfIfWaitInterval	1.3.6.1.4.1.1872.2.5.3.3.4.3.1.4	Integer32	read-only	The OSPF Wait interval for this OSPF interface.
ospfinfo	1.3.6.1.4.1.1872.2.5.3.3.4
ospfInterface	1.3.6.1.4.1.1872.2.5.3.2.6.3
C32 ospfIntfBackup	1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.7	Counter32	read-only	The total number of Backup Designated Routers on the attatched network for this OSPF interface.
ospfIntfChangeStats	1.3.6.1.4.1.1872.2.5.3.2.6.3.3		not-accessible	The table of OSPF Interface change Statistics.
ospfIntfChangeStatsEntry	1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1		not-accessible	OSPF interface Change statistics.
I32 ospfIntfCountForRouter	1.3.6.1.4.1.1872.2.5.3.3.4.1.4	Integer32	read-only	The number of interfaces for this router.
C32 ospfIntfDown	1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.3	Counter32	read-only	The total number of times the interface was down.
C32 ospfIntfErrAuthFailure	1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.2	Counter32	read-only	The total number of packets received with a wrong password in this area.
C32 ospfIntfErrDeadMismatch	1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.5	Counter32	read-only	The total number of packets received with a different dead interval in this area.
C32 ospfIntfErrHelloMismatch	1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.4	Counter32	read-only	The total number of packets received with a different hello interval in this area.
I32 ospfIntfErrIndex	1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.1	Integer32	read-only	The index of the OSPF Intf for which these statistics apply.
C32 ospfIntfErrNetmaskMismatch	1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.3	Counter32	read-only	The total number of packets received with a wrong netmask in this area.
C32 ospfIntfErrOptionsMismatch	1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.6	Counter32	read-only	The total number of packets received with a different options in this area.
ospfIntfErrorStats	1.3.6.1.4.1.1872.2.5.3.2.6.3.4		not-accessible	The table of OSPF Interface Error Statistics.
ospfIntfErrorStatsEntry	1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1		not-accessible	Error Statistics for an OSPF area.
C32 ospfIntfErrUnknownNbr	1.3.6.1.4.1.1872.2.5.3.2.6.3.4.1.7	Counter32	read-only	The total number of packets received from an unknown neighbour in this area.
C32 ospfIntfHello	1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.2	Counter32	read-only	The total number of Hello packets sent by this interface.
I32 ospfIntfIndex	1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.1	Integer32	read-only	The index of the OSPF Interface for which these statistics apply.
ospfIntfInfoEntry	1.3.6.1.4.1.1872.2.5.3.3.4.3.1		not-accessible	Information about a OSPF interface.
ospfIntfInfoTable	1.3.6.1.4.1.1872.2.5.3.3.4.3		not-accessible	The table of OSPF Interface information.
C32 ospfIntfLoop	1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.4	Counter32	read-only	The total number of times the interface was no longer connected to the attatched network.
C32 ospfIntfNbrAdjointOk	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.4	Counter32	read-only	The total number of decisions to be made (again) as to whether an adjacency should be established/maintained with the neighbour. for this OSPF interface.
C32 ospfIntfNbrBadRequests	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.7	Counter32	read-only	The total number of Link State Requests which have been received for a link state advertisement not contained in the database for this interface.
C32 ospfIntfNbrBadSequence	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.8	Counter32	read-only	The total number of Database Description packets which have been received that either a) has an unexpected DD sequence number b) Unexpectedly has the init bit set c) Has an options field differing from the last Options field received in a Database Description packet. Any of these conditions indicate that some error has occured during adjacency establishment for this interface.
C32 ospfIntfNbrChange	1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.8	Counter32	read-only	The total number of changes in the set of bidirectional neighbours associated with the interface for this OSPF interface.
ospfIntfNbrChangeStats	1.3.6.1.4.1.1872.2.5.3.2.6.3.2		not-accessible	The table of OSPF Interface Neighbour change Statistics.
ospfIntfNbrChangeStatsEntry	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1		not-accessible	OSPF interface Neighbour Change statistics.
C32 ospfIntfNbrDown	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.12	Counter32	read-only	The total number of Neighbouring routers down (i.e. in the initial state of a neighbour conversation.) for this interface.
C32 ospfIntfNbrExchangeDone	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.6	Counter32	read-only	The total number of neighbours in this state (i.e. in an adjacency's final state) having transimitted a full sequence of Database Description packets, for this OSPF interface.
C32 ospfIntfNbrhello	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.2	Counter32	read-only	The total number of Hello packets received from neighbours in this OSPF interface.
I32 ospfIntfNbrIndex	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.1	Integer32	read-only	The index of the OSPF Interface for which these statistics apply.
C32 ospfIntfNbrLoadingDone	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.9	Counter32	read-only	The total number of link state updates received for all out-of-date portions of the database for this OSPF interface.
C32 ospfIntfNbrN1way	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.10	Counter32	read-only	The total number of Hello packets received from neighbours, in which this router is not mentioned for this OSPF interface.
C32 ospfIntfNbrN2way	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.13	Counter32	read-only	The total number of Hello packets received from neighbours, in which this router is mentioned for this OSPF interface.
C32 ospfIntfNbrNegotiationDone	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.5	Counter32	read-only	The total number of neighbours in this state wherein the Master/slave relationship has been negotiated, and sequence numbers have been exchanged, for this OSPF interface.
C32 ospfIntfNbrRstAd	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.11	Counter32	read-only	The sum total number of times the Neighbour adjacency has been reset on this interface.
C32 ospfIntfNbrStart	1.3.6.1.4.1.1872.2.5.3.2.6.3.2.1.3	Counter32	read-only	The total number of neighbours in this state (i.e. an indication that Hello packets should now be sent to the neighbour at intervals of HelloInterval seconds.) in this OSPF interface.
C32 ospfIntfRxDatabase	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.6	Counter32	read-only	The total number of Database Description packets received for this OSPF interface.
C32 ospfIntfRxHello	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.4	Counter32	read-only	The total number of Hello packets received for this OSPF interface.
C32 ospfIntfRxlsAcks	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.10	Counter32	read-only	The total number of Link State Acknowledgement packets received for this OSPF interface.
C32 ospfIntfRxlsReqs	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.8	Counter32	read-only	The total number of Link State Request packets received for this OSPF interface.
C32 ospfIntfRxlsUpdates	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.12	Counter32	read-only	The total number of Link State Update packets received for this OSPF interface.
C32 ospfIntfRxPkts	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.2	Counter32	read-only	The total number of OSPF packets received for this OSPF interface.
I32 ospfIntfRxTxIndex	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.1	Integer32	read-only	The OSPF interface for which these statistics apply.
ospfIntfRxTxStats	1.3.6.1.4.1.1872.2.5.3.2.6.3.1		not-accessible	The table of OSPF Interface Rx/Tx packet Statistics.
ospfIntfRxTxStatsEntry	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1		not-accessible	OSPF interface Rx/Tx packet statistics.
I32 ospfIntfTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.13.1.5	Integer32	read-only	The maximum number of rows in the OSPF Interface table.
C32 ospfIntfTxDatabase	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.7	Counter32	read-only	The total number of Database Description packets transmitted for this OSPF interface.
C32 ospfIntfTxHello	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.5	Counter32	read-only	The total number of Hello packets transmitted for this OSPF interface.
C32 ospfIntfTxlsAcks	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.11	Counter32	read-only	The total number of Link State Acknowledgement packets transmitted for this OSPF interface.
C32 ospfIntfTxlsReqs	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.9	Counter32	read-only	The total number of Link State Request packets transmitted for this OSPF interface.
C32 ospfIntfTxlsUpdates	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.13	Counter32	read-only	The total number of Link State Update packets transmitted for this OSPF interface.
C32 ospfIntfTxPkts	1.3.6.1.4.1.1872.2.5.3.2.6.3.1.1.3	Counter32	read-only	The total number of OSPF packets transmitted for this OSPF interface.
C32 ospfIntfUnloop	1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.5	Counter32	read-only	The total number of times the interface, connected back to the attatched network.
C32 ospfIntfWaitTimer	1.3.6.1.4.1.1872.2.5.3.2.6.3.3.1.6	Counter32	read-only	The total number of times the Wait Timer has been fired, (indicating the end of the waiting period that is required before electing a (Backup) Designated Router) for this OSPF interface.
I32 ospfLsTypesSupported	1.3.6.1.4.1.1872.2.5.3.3.4.1.3	Integer32	read-only	The Link State Types that are supported.
I32 ospfMdkeyTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.13.11	Integer32	read-only	The maximum number of rows in the OSPF Mdkey table.
I32 ospfNbrInExchState	1.3.6.1.4.1.1872.2.5.3.3.4.1.8	Integer32	read-only	The number of neighbours in the exchange state.
I32 ospfNbrInFullState	1.3.6.1.4.1.1872.2.5.3.3.4.1.9	Integer32	read-only	The number of neighbours in the Full state of exchange.
I32 ospfNbrInInitState	1.3.6.1.4.1.1872.2.5.3.3.4.1.7	Integer32	read-only	The number of neighbours in the initial state of exchange.
INT ospfNewCfgAreaAuthType	1.3.6.1.4.1.1872.2.5.3.1.13.3.1.4	INTEGER	read-create	Type of authentication being used. none(1) - no authentication password(2) - use password. md5(3) - use MD5 authentication.
INT ospfNewCfgAreaDelete	1.3.6.1.4.1.1872.2.5.3.1.13.3.1.8	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ospfNewCfgAreaEntry	1.3.6.1.4.1.1872.2.5.3.1.13.3.1		not-accessible	Information about a OSPF area.
IP ospfNewCfgAreaId	1.3.6.1.4.1.1872.2.5.3.1.13.3.1.2	IpAddress	read-only	The IP Address of the OSPF area.
I32 ospfNewCfgAreaIndex	1.3.6.1.4.1.1872.2.5.3.1.13.3.1.1	Integer32	read-only	The OSPF area number for which the OSPF area table is related.
INT ospfNewCfgAreaMetric	1.3.6.1.4.1.1872.2.5.3.1.13.3.1.6	INTEGER	read-create	The Stub area metric for the OSPF area.
INT ospfNewCfgAreaSpfInterval	1.3.6.1.4.1.1872.2.5.3.1.13.3.1.3	INTEGER	read-create	The SPF interval for the OSPF area.
INT ospfNewCfgAreaState	1.3.6.1.4.1.1872.2.5.3.1.13.3.1.7	INTEGER	read-create	Enable or disable OSPF Area.
ospfNewCfgAreaTable	1.3.6.1.4.1.1872.2.5.3.1.13.3		not-accessible	The table of OSPF Area configuration in the new_config.
INT ospfNewCfgAreaType	1.3.6.1.4.1.1872.2.5.3.1.13.3.1.5	INTEGER	read-create	Type of area being used.
INT ospfNewCfgDefaultRouteMetric	1.3.6.1.4.1.1872.2.5.3.1.13.1.2	INTEGER	read-write	Specify the metric to be assigned.
INT ospfNewCfgDefaultRouteMetricType	1.3.6.1.4.1.1872.2.5.3.1.13.1.4	INTEGER	read-write	Specify the AS External metric type to be assigned.
I32 ospfNewCfgEbgpAddOutRmap	1.3.6.1.4.1.1872.2.5.3.1.13.4.2.7	Integer32	read-write	The route map to be added into out-rmap list. When read, 0 is returned.
INT ospfNewCfgEbgpMetric	1.3.6.1.4.1.1872.2.5.3.1.13.4.2.2	INTEGER	read-write	The export metric to be assigned to External BGP routes. A value of 0 indicates none.
INT ospfNewCfgEbgpMetricType	1.3.6.1.4.1.1872.2.5.3.1.13.4.2.4	INTEGER	read-write	The AS External metric type for External BGP routes.
OCT ospfNewCfgEbgpOutRmapList	1.3.6.1.4.1.1872.2.5.3.1.13.4.2.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfNewCfgEbgpRemoveOutRmap	1.3.6.1.4.1.1872.2.5.3.1.13.4.2.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
I32 ospfNewCfgFixedAddOutRmap	1.3.6.1.4.1.1872.2.5.3.1.13.4.4.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
INT ospfNewCfgFixedMetric	1.3.6.1.4.1.1872.2.5.3.1.13.4.4.2	INTEGER	read-write	The export metric for fixed routes. A value of 0 indicates none
INT ospfNewCfgFixedMetricType	1.3.6.1.4.1.1872.2.5.3.1.13.4.4.4	INTEGER	read-write	The AS External metric type for fixed routes.
OCT ospfNewCfgFixedOutRmapList	1.3.6.1.4.1.1872.2.5.3.1.13.4.4.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfNewCfgFixedRemoveOutRmap	1.3.6.1.4.1.1872.2.5.3.1.13.4.4.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
I32 ospfNewCfgHostAreaIndex	1.3.6.1.4.1.1872.2.5.3.1.13.13.1.3	Integer32	read-create	The OSPF area index.
INT ospfNewCfgHostCost	1.3.6.1.4.1.1872.2.5.3.1.13.13.1.4	INTEGER	read-create	Cost of the host entry.
INT ospfNewCfgHostDelete	1.3.6.1.4.1.1872.2.5.3.1.13.13.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ospfNewCfgHostEntry	1.3.6.1.4.1.1872.2.5.3.1.13.13.1		not-accessible	Information about a OSPF host.
I32 ospfNewCfgHostIndex	1.3.6.1.4.1.1872.2.5.3.1.13.13.1.1	Integer32	read-only	The OSPF host number for which the OSPF host table is related.
IP ospfNewCfgHostIpAddr	1.3.6.1.4.1.1872.2.5.3.1.13.13.1.2	IpAddress	read-create	The IP Address of the OSPF host.
INT ospfNewCfgHostState	1.3.6.1.4.1.1872.2.5.3.1.13.13.1.5	INTEGER	read-create	Enable or disable Host Entry.
ospfNewCfgHostTable	1.3.6.1.4.1.1872.2.5.3.1.13.13		not-accessible	The table of OSPF Host configuration.
I32 ospfNewCfgIbgpAddOutRmap	1.3.6.1.4.1.1872.2.5.3.1.13.4.3.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
INT ospfNewCfgIbgpMetric	1.3.6.1.4.1.1872.2.5.3.1.13.4.3.2	INTEGER	read-write	The export metric for Internal BGP routes. A value of 0 indicates none.
INT ospfNewCfgIbgpMetricType	1.3.6.1.4.1.1872.2.5.3.1.13.4.3.4	INTEGER	read-write	The AS External metric type for Internal BGP routes.
OCT ospfNewCfgIbgpOutRmapList	1.3.6.1.4.1.1872.2.5.3.1.13.4.3.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfNewCfgIbgpRemoveOutRmap	1.3.6.1.4.1.1872.2.5.3.1.13.4.3.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
INT ospfNewCfgIntfAreaId	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.4	INTEGER	read-create	Specify Area Index.
INT ospfNewCfgIntfCost	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.6	INTEGER	read-create	Specify interface cost.
INT ospfNewCfgIntfDead	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.8	INTEGER	read-create	Dead interval in seconds.
INT ospfNewCfgIntfDelete	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.13	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ospfNewCfgIntfEntry	1.3.6.1.4.1.1872.2.5.3.1.13.8.1		not-accessible	Information about an OSPF Interface.
INT ospfNewCfgIntfHello	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.7	INTEGER	read-create	Hello interval in seconds.
IP ospfNewCfgIntfId	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.2	IpAddress	read-only	The IP Address of the OSPF interface.
I32 ospfNewCfgIntfIndex	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.1	Integer32	read-only	The OSPF Interface number for which the OSPF Interface table is related.
STR ospfNewCfgIntfKey	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.11	DisplayString	read-create	Specify Authentication Key.
INT ospfNewCfgIntfMdkey	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.3	INTEGER	read-create	The MD5 key for the OSPF interface 0 (none) no MD5 authentication.
INT ospfNewCfgIntfPriority	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.5	INTEGER	read-create	Specify interface router priority.
INT ospfNewCfgIntfRetrans	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.10	INTEGER	read-create	Retransmit interval in seconds.
INT ospfNewCfgIntfState	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.12	INTEGER	read-create	Enable or disable OSPF Interface.
ospfNewCfgIntfTable	1.3.6.1.4.1.1872.2.5.3.1.13.8		not-accessible	The table of OSPF Interface configuration in the new_config.
INT ospfNewCfgIntfTransit	1.3.6.1.4.1.1872.2.5.3.1.13.8.1.9	INTEGER	read-create	Transit delay in seconds.
INT ospfNewCfgLsdb	1.3.6.1.4.1.1872.2.5.3.1.13.1.13	INTEGER	read-write	Specify the LSDB limit for external LSA.
INT ospfNewCfgMdkeyDelete	1.3.6.1.4.1.1872.2.5.3.1.13.6.1.3	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ospfNewCfgMdkeyEntry	1.3.6.1.4.1.1872.2.5.3.1.13.6.1		not-accessible	Information about an OSPF MD keys table.
I32 ospfNewCfgMdkeyIndex	1.3.6.1.4.1.1872.2.5.3.1.13.6.1.1	Integer32	read-only	The OSPF MD5 Key number for which the OSPF MdKey table is related.
STR ospfNewCfgMdkeyKey	1.3.6.1.4.1.1872.2.5.3.1.13.6.1.2	DisplayString	read-create	The character string representing the MD5 Key.
ospfNewCfgMdkeyTable	1.3.6.1.4.1.1872.2.5.3.1.13.6		not-accessible	The table of OSPF MD5 keys in the new_config.
IP ospfNewCfgRangeAddr	1.3.6.1.4.1.1872.2.5.3.1.13.15.1.2	IpAddress	read-create	The IP Address of the range.
I32 ospfNewCfgRangeAreaIndex	1.3.6.1.4.1.1872.2.5.3.1.13.15.1.4	Integer32	read-create	The area index.
INT ospfNewCfgRangeDelete	1.3.6.1.4.1.1872.2.5.3.1.13.15.1.7	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ospfNewCfgRangeEntry	1.3.6.1.4.1.1872.2.5.3.1.13.15.1		not-accessible	Information about an OSPF summary range.
INT ospfNewCfgRangeHideState	1.3.6.1.4.1.1872.2.5.3.1.13.15.1.5	INTEGER	read-create	The state of the hide range.
I32 ospfNewCfgRangeIndex	1.3.6.1.4.1.1872.2.5.3.1.13.15.1.1	Integer32	read-only	The range number for which the OSPF summary range table is related.
IP ospfNewCfgRangeMask	1.3.6.1.4.1.1872.2.5.3.1.13.15.1.3	IpAddress	read-create	The mask of the range.
INT ospfNewCfgRangeState	1.3.6.1.4.1.1872.2.5.3.1.13.15.1.6	INTEGER	read-create	The state of the range.
ospfNewCfgRangeTable	1.3.6.1.4.1.1872.2.5.3.1.13.15		not-accessible	The table of OSPF summary range in the new configuration.
I32 ospfNewCfgRipAddOutRmap	1.3.6.1.4.1.1872.2.5.3.1.13.4.5.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
INT ospfNewCfgRipMetric	1.3.6.1.4.1.1872.2.5.3.1.13.4.5.2	INTEGER	read-write	The export metric for RIP routes. A value of 0 indicates none
INT ospfNewCfgRipMetricType	1.3.6.1.4.1.1872.2.5.3.1.13.4.5.4	INTEGER	read-write	The AS External metric type for RIP routes.
OCT ospfNewCfgRipOutRmapList	1.3.6.1.4.1.1872.2.5.3.1.13.4.5.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfNewCfgRipRemoveOutRmap	1.3.6.1.4.1.1872.2.5.3.1.13.4.5.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
INT ospfNewCfgState	1.3.6.1.4.1.1872.2.5.3.1.13.1.11	INTEGER	read-write	Globally turn OSPF on or off.
I32 ospfNewCfgStaticAddOutRmap	1.3.6.1.4.1.1872.2.5.3.1.13.4.1.7	Integer32	read-write	The route map to be add into out-rmap list. When read, 0 is returned.
INT ospfNewCfgStaticMetric	1.3.6.1.4.1.1872.2.5.3.1.13.4.1.2	INTEGER	read-write	The metric to be assigned to static routes. A value of 0 indicates none.
INT ospfNewCfgStaticMetricType	1.3.6.1.4.1.1872.2.5.3.1.13.4.1.4	INTEGER	read-write	The AS External metric type for static routes.
OCT ospfNewCfgStaticOutRmapList	1.3.6.1.4.1.1872.2.5.3.1.13.4.1.6	OCTET STRING	read-only	The route maps present in the out route map list. The route maps are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Rmap 9 \|\| \|\| \|\| \|\|___ Rmap 8 \|\| \|____ Rmap 7 \|\| . . . \|\|_________ Rmap 2 \|__________ Rmap 1 where x : 1 - The represented route map is selected 0 - The represented route map is not selected
I32 ospfNewCfgStaticRemoveOutRmap	1.3.6.1.4.1.1872.2.5.3.1.13.4.1.8	Integer32	read-write	The route map to be removed from out-rmap list. When read, 0 is returned.
INT ospfNewCfgVirtIntfAreaId	1.3.6.1.4.1.1872.2.5.3.1.13.10.1.2	INTEGER	read-create	The OSPF Area Id.
INT ospfNewCfgVirtIntfDead	1.3.6.1.4.1.1872.2.5.3.1.13.10.1.6	INTEGER	read-create	Dead interval in seconds.
INT ospfNewCfgVirtIntfDelete	1.3.6.1.4.1.1872.2.5.3.1.13.10.1.11	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ospfNewCfgVirtIntfEntry	1.3.6.1.4.1.1872.2.5.3.1.13.10.1		not-accessible	Information about an OSPF virtual Interface.
INT ospfNewCfgVirtIntfHello	1.3.6.1.4.1.1872.2.5.3.1.13.10.1.5	INTEGER	read-create	Hello interval in seconds.
I32 ospfNewCfgVirtIntfIndex	1.3.6.1.4.1.1872.2.5.3.1.13.10.1.1	Integer32	read-only	The OSPF Virtual Interface number for which the OSPF Virtual Interface table is related.
STR ospfNewCfgVirtIntfKey	1.3.6.1.4.1.1872.2.5.3.1.13.10.1.9	DisplayString	read-create	Specify Authentication Key. Enter string of 8 characters or None.
INT ospfNewCfgVirtIntfMdkey	1.3.6.1.4.1.1872.2.5.3.1.13.10.1.4	INTEGER	read-create	The MD5 key for the OSPF virtual interface 0 (none) no MD5 authentication.
IP ospfNewCfgVirtIntfNbr	1.3.6.1.4.1.1872.2.5.3.1.13.10.1.3	IpAddress	read-create	The IP Address of the OSPF neighbour for this virtual interface.
INT ospfNewCfgVirtIntfRetrans	1.3.6.1.4.1.1872.2.5.3.1.13.10.1.8	INTEGER	read-create	Retransmit interval in seconds.
INT ospfNewCfgVirtIntfState	1.3.6.1.4.1.1872.2.5.3.1.13.10.1.10	INTEGER	read-create	Enable or disable OSPF Interface.
ospfNewCfgVirtIntfTable	1.3.6.1.4.1.1872.2.5.3.1.13.10		not-accessible	The table of OSPF Virtual Interface configuration in the new_config.
INT ospfNewCfgVirtIntfTransit	1.3.6.1.4.1.1872.2.5.3.1.13.10.1.7	INTEGER	read-create	Transit delay in seconds.
INT ospfNewCfgVisionAreaAuthType	1.3.6.1.4.1.1872.2.5.3.1.13.16.1.4	INTEGER	read-create	Type of authentication being used. none(1) - no authentication password(2) - use password. md5(3) - use MD5 authentication.
INT ospfNewCfgVisionAreaDelete	1.3.6.1.4.1.1872.2.5.3.1.13.16.1.8	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
ospfNewCfgVisionAreaEntry	1.3.6.1.4.1.1872.2.5.3.1.13.16.1		not-accessible	Information about a OSPF area.
IP ospfNewCfgVisionAreaId	1.3.6.1.4.1.1872.2.5.3.1.13.16.1.2	IpAddress	read-write	The IP Address of the OSPF area.
I32 ospfNewCfgVisionAreaIndex	1.3.6.1.4.1.1872.2.5.3.1.13.16.1.1	Integer32	read-only	The OSPF area number for which the OSPF area table is related.
INT ospfNewCfgVisionAreaMetric	1.3.6.1.4.1.1872.2.5.3.1.13.16.1.6	INTEGER	read-create	The Stub area metric for the OSPF area.
INT ospfNewCfgVisionAreaSpfInterval	1.3.6.1.4.1.1872.2.5.3.1.13.16.1.3	INTEGER	read-create	The SPF interval for the OSPF area.
INT ospfNewCfgVisionAreaState	1.3.6.1.4.1.1872.2.5.3.1.13.16.1.7	INTEGER	read-create	Enable or disable OSPF Area.
ospfNewCfgVisionAreaTable	1.3.6.1.4.1.1872.2.5.3.1.13.16		not-accessible	The table of OSPF Area configuration in the new_config.
INT ospfNewCfgVisionAreaType	1.3.6.1.4.1.1872.2.5.3.1.13.16.1.5	INTEGER	read-create	Type of area being used.
I32 ospfNumberOfInterfacesUp	1.3.6.1.4.1.1872.2.5.3.3.4.2.1.3	Integer32	read-only	The number of interfaces UP in area.
I32 ospfNumberOfLsdbEntries	1.3.6.1.4.1.1872.2.5.3.3.4.2.1.4	Integer32	read-only	The number of Link State Database entries for this OSPF area.
C32 ospfProcessUptime	1.3.6.1.4.1.1872.2.5.3.3.4.1.2	Counter32	read-only	The time since ospf has been started.
I32 ospfRangeTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.13.1.7	Integer32	read-only	The maximum number of rows in the OSPF Range table.
ospfRedistributeEbgp	1.3.6.1.4.1.1872.2.5.3.1.13.4.2
ospfRedistributeFixed	1.3.6.1.4.1.1872.2.5.3.1.13.4.4
ospfRedistributeIbgp	1.3.6.1.4.1.1872.2.5.3.1.13.4.3
ospfRedistributeRip	1.3.6.1.4.1.1872.2.5.3.1.13.4.5
ospfRedistributeStatic	1.3.6.1.4.1.1872.2.5.3.1.13.4.1
ospfRouteRedistribution	1.3.6.1.4.1.1872.2.5.3.1.13.4
I32 ospfStartTime	1.3.6.1.4.1.1872.2.5.3.3.4.1.1	Integer32	read-only	The time when ospf has been started.
ospfStats	1.3.6.1.4.1.1872.2.5.3.2.6
ospfTimersKickOffStats	1.3.6.1.4.1.1872.2.5.3.2.6.1.4
C32 ospfTmrsKckOffAseExport	1.3.6.1.4.1.1872.2.5.3.2.6.1.4.7	Counter32	read-only	The total number of times the ASE Export timer has been fired.
C32 ospfTmrsKckOffDbage	1.3.6.1.4.1.1872.2.5.3.2.6.1.4.5	Counter32	read-only	The total number of times the Dbage has been fired.
C32 ospfTmrsKckOffHello	1.3.6.1.4.1.1872.2.5.3.2.6.1.4.1	Counter32	read-only	The sum total number of times the Hello timer has been fired (which triggers the send of a Hello packet) across all OPSF areas and interfaces.
C32 ospfTmrsKckOffLsaAck	1.3.6.1.4.1.1872.2.5.3.2.6.1.4.4	Counter32	read-only	The sum total number of times the Lsa Ack timer has been fired across all ospf areas and interfaces.
C32 ospfTmrsKckOffLsaLock	1.3.6.1.4.1.1872.2.5.3.2.6.1.4.3	Counter32	read-only	The sum total number of times the Lsa Lock timer has been fired across all OSPF areas and interfaces.
C32 ospfTmrsKckOffRetransmit	1.3.6.1.4.1.1872.2.5.3.2.6.1.4.2	Counter32	read-only	The sum total number of times the Retransmit timer has been fired across all OPSF areas and interfaces.
C32 ospfTmrsKckOffSummary	1.3.6.1.4.1.1872.2.5.3.2.6.1.4.6	Counter32	read-only	The total number of times the Summary timer has been fired.
I32 ospfTotalAreas	1.3.6.1.4.1.1872.2.5.3.3.4.1.10	Integer32	read-only	The Total number of areas.
I32 ospfTotalNeighbours	1.3.6.1.4.1.1872.2.5.3.3.4.1.6	Integer32	read-only	The total number of OSPF neighbours.
I32 ospfTotalNssaAreas	1.3.6.1.4.1.1872.2.5.3.3.4.1.12	Integer32	read-only	The Total number of NSSA areas.
I32 ospfTotalNumberOfInterfaces	1.3.6.1.4.1.1872.2.5.3.3.4.2.1.2	Integer32	read-only	The total number of interfaces for this OSPF area.
I32 ospfTotalTransitAreas	1.3.6.1.4.1.1872.2.5.3.3.4.1.11	Integer32	read-only	The Total number of Transit areas.
I32 ospfVirtIntfTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.13.1.8	Integer32	read-only	The maximum number of rows in the OSPF Virtual Interface table.
I32 ospfVlinkCountForRouter	1.3.6.1.4.1.1872.2.5.3.3.4.1.5	Integer32	read-only	The number of virtual links for this router.
rip2Cfg	1.3.6.1.4.1.1872.2.5.3.1.18
INT rip2CurCfgState	1.3.6.1.4.1.1872.2.5.3.1.18.3.1	INTEGER	read-only	RIP global state.
INT rip2CurCfgStaticSupply	1.3.6.1.4.1.1872.2.5.3.1.18.3.7	INTEGER	read-only	Advertise Static Routes.
INT rip2CurCfgUpdatePeriod	1.3.6.1.4.1.1872.2.5.3.1.18.3.3	INTEGER	read-only	Update Period in seconds.
INT rip2CurCfgVip	1.3.6.1.4.1.1872.2.5.3.1.18.3.5	INTEGER	read-only	Advertise VIP Host Routes.
rip2GeneralInfo	1.3.6.1.4.1.1872.2.5.3.3.10.1
rip2Info	1.3.6.1.4.1.1872.2.5.3.3.10
rip2InfoIntfTable	1.3.6.1.4.1.1872.2.5.3.3.10.2		not-accessible	The information table of RIP.
INT rip2NewCfgState	1.3.6.1.4.1.1872.2.5.3.1.18.3.2	INTEGER	read-write	Globally turn RIP on or off.
INT rip2NewCfgStaticSupply	1.3.6.1.4.1.1872.2.5.3.1.18.3.8	INTEGER	read-write	Advertise Static Routes.
INT rip2NewCfgUpdatePeriod	1.3.6.1.4.1.1872.2.5.3.1.18.3.4	INTEGER	read-write	Update Period in seconds.
INT rip2NewCfgVip	1.3.6.1.4.1.1872.2.5.3.1.18.3.6	INTEGER	read-write	Advertise VIP Host Routes.
rip2RoutesInfo	1.3.6.1.4.1.1872.2.5.3.3.11
STR rip2RoutesInfoDestination	1.3.6.1.4.1.1872.2.5.3.3.11.1.1.3	DisplayString	read-only	The destination of the rip route.
I32 rip2RoutesInfoDestIndex	1.3.6.1.4.1.1872.2.5.3.3.11.1.1.1	Integer32	read-only	The index of the rip routes.
rip2RoutesInfoEntry	1.3.6.1.4.1.1872.2.5.3.3.11.1.1		not-accessible	Information about rip routes.
IP rip2RoutesInfoIpAddress	1.3.6.1.4.1.1872.2.5.3.3.11.1.1.4	IpAddress	read-only	The ipaddress of the next hop.
INT rip2RoutesInfoMetric	1.3.6.1.4.1.1872.2.5.3.3.11.1.1.5	INTEGER	read-only	RIP route metric for this route.
I32 rip2RoutesInfoNxtHopIndex	1.3.6.1.4.1.1872.2.5.3.3.11.1.1.2	Integer32	read-only	The index of the next hop.
rip2RoutesInfoTable	1.3.6.1.4.1.1872.2.5.3.3.11.1		not-accessible	The table of rip routes.
rip2Stats	1.3.6.1.4.1.1872.2.5.3.2.13
INT ripCurCfgIntfAuth	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.11	INTEGER	read-only	The type of Authentication used on this interface.
INT ripCurCfgIntfDefault	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.13	INTEGER	read-only	Specifies what RIP does with default routes.
INT ripCurCfgIntfDefListen	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.5	INTEGER	read-only	Enable or disable listening to default routes.
ripCurCfgIntfEntry	1.3.6.1.4.1.1872.2.5.3.1.18.1.1		not-accessible	Information about RIP on IP interface.
I32 ripCurCfgIntfIndex	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.1	Integer32	read-only	The interface number for which the RIP information is related.
STR ripCurCfgIntfKey	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.12	DisplayString	read-only	RIP update authentication password.
INT ripCurCfgIntfListen	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.4	INTEGER	read-only	Enable or disable listening to route updates.
INT ripCurCfgIntfMcastUpdate	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.7	INTEGER	read-only	Enable or disable multicast updates.
INT ripCurCfgIntfMetric	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.10	INTEGER	read-only	RIP route metric for this interface.
INT ripCurCfgIntfPoisonReverse	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.8	INTEGER	read-only	RIP poison reverse.
INT ripCurCfgIntfState	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.3	INTEGER	read-only	Enable or disable RIP protocol.
INT ripCurCfgIntfSupply	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.9	INTEGER	read-only	Enable or disable supplying route updates.
ripCurCfgIntfTable	1.3.6.1.4.1.1872.2.5.3.1.18.1		not-accessible	The table of RIP on IP interface configuration in the current_config.
INT ripCurCfgIntfTrigUpdate	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.6	INTEGER	read-only	Enable or disable triggered updates.
INT ripCurCfgIntfVersion	1.3.6.1.4.1.1872.2.5.3.1.18.1.1.2	INTEGER	read-only	RIP version.
ripGeneral	1.3.6.1.4.1.1872.2.5.3.1.18.3
IP ripInfoIntfAddress	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.3	IpAddress	read-only	The interface address.
INT ripInfoIntfAuth	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.11	INTEGER	read-only	The type of Authentication used on this interface.
INT ripInfoIntfDefault	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.13	INTEGER	read-only	Specifies what RIP does with default routes.
ripInfoIntfEntry	1.3.6.1.4.1.1872.2.5.3.3.10.2.1		not-accessible	Information about RIP on IP interface.
I32 ripInfoIntfIndex	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.1	Integer32	read-only	The interface number for which the RIP information is related.
STR ripInfoIntfKey	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.12	DisplayString	read-only	RIP update authentication password.
INT ripInfoIntfListen	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.5	INTEGER	read-only	The status of listening to route updates.
INT ripInfoIntfMcastUpdate	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.7	INTEGER	read-only	The status of multicast updates.
INT ripInfoIntfMetric	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.10	INTEGER	read-only	RIP route metric for this interface.
INT ripInfoIntfPoisonReverse	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.8	INTEGER	read-only	The status of RIP poison reverse.
INT ripInfoIntfState	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.4	INTEGER	read-only	The status of RIP protocol.
INT ripInfoIntfSupply	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.9	INTEGER	read-only	The status of supplying route updates.
INT ripInfoIntfTrigUpdate	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.6	INTEGER	read-only	The status of triggered updates.
INT ripInfoIntfVersion	1.3.6.1.4.1.1872.2.5.3.3.10.2.1.2	INTEGER	read-only	RIP version.
INT ripInfoState	1.3.6.1.4.1.1872.2.5.3.3.10.1.1	INTEGER	read-only	RIP global state.
INT ripInfoStaticSupply	1.3.6.1.4.1.1872.2.5.3.3.10.1.4	INTEGER	read-only	Advertise Static Routes.
INT ripInfoUpdatePeriod	1.3.6.1.4.1.1872.2.5.3.3.10.1.2	INTEGER	read-only	Update Period in seconds.
INT ripInfoVip	1.3.6.1.4.1.1872.2.5.3.3.10.1.3	INTEGER	read-only	Advertise VIP Host Routes.
INT ripNewCfgIntfAuth	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.11	INTEGER	read-write	The type of Authentication used on this interface.
INT ripNewCfgIntfDefault	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.13	INTEGER	read-create	Specifies what RIP does with default routes. The default routes action could be set to listen/supply/both/none.
INT ripNewCfgIntfDefListen	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.5	INTEGER	read-create	Enable or disable listening to default routes.
ripNewCfgIntfEntry	1.3.6.1.4.1.1872.2.5.3.1.18.2.1		not-accessible	Information about RIP on IP interface.
I32 ripNewCfgIntfIndex	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.1	Integer32	read-only	The interface number for which the RIP information is related.
STR ripNewCfgIntfKey	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.12	DisplayString	read-create	RIP update authentication password.
INT ripNewCfgIntfListen	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.4	INTEGER	read-create	Enable or disable listening to route updates.
INT ripNewCfgIntfMcastUpdate	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.7	INTEGER	read-create	Enable or disable multicast updates.
INT ripNewCfgIntfMetric	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.10	INTEGER	read-write	RIP route metric for this interface.
INT ripNewCfgIntfPoisonReverse	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.8	INTEGER	read-create	RIP poison reverse.
INT ripNewCfgIntfState	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.9	INTEGER	read-create	Enable or disable RIP protocol.
INT ripNewCfgIntfSupply	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.3	INTEGER	read-create	Enable or disable supplying route updates.
ripNewCfgIntfTable	1.3.6.1.4.1.1872.2.5.3.1.18.2		not-accessible	The table of RIP on IP interface configuration in the new_config.
INT ripNewCfgIntfTrigUpdate	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.6	INTEGER	read-create	Enable or disable triggered updates.
INT ripNewCfgIntfVersion	1.3.6.1.4.1.1872.2.5.3.1.18.2.1.2	INTEGER	read-create	RIP version.
C32 ripStatInBadSizePkts	1.3.6.1.4.1.1872.2.5.3.2.13.8	Counter32	read-only	The total number of bad size RIP packets recieved.
C32 ripStatInBadSourceIP	1.3.6.1.4.1.1872.2.5.3.2.13.12	Counter32	read-only	The total number of RIP bad source IP recieved.
C32 ripStatInBadSourcePort	1.3.6.1.4.1.1872.2.5.3.2.13.11	Counter32	read-only	The total number of RIP bad source port recieved.
C32 ripStatInBadVersion	1.3.6.1.4.1.1872.2.5.3.2.13.9	Counter32	read-only	The total number of RIP bad versions recieved.
C32 ripStatInBadZeros	1.3.6.1.4.1.1872.2.5.3.2.13.10	Counter32	read-only	The total number of RIP bad zeros recieved.
C32 ripStatInPacketsEx	1.3.6.1.4.1.1872.2.5.3.2.13.1	Counter32	read-only	The total number of RIP packets recieved.
C32 ripStatInRequestPkts	1.3.6.1.4.1.1872.2.5.3.2.13.3	Counter32	read-only	The total number of RIP requests recieved.
C32 ripStatInResponsePkts	1.3.6.1.4.1.1872.2.5.3.2.13.4	Counter32	read-only	The total number of RIP response recieved.
C32 ripStatInSelfRcvPkts	1.3.6.1.4.1.1872.2.5.3.2.13.13	Counter32	read-only	The total number of RIP packets from self received.
C32 ripStatOutPackets	1.3.6.1.4.1.1872.2.5.3.2.13.2	Counter32	read-only	The total number of RIP packets transmitted.
C32 ripStatOutRequestPkts	1.3.6.1.4.1.1872.2.5.3.2.13.5	Counter32	read-only	The total number of RIP requests transmitted.
C32 ripStatOutResponsePkts	1.3.6.1.4.1.1872.2.5.3.2.13.6	Counter32	read-only	The total number of RIP responses transmitted.
C32 ripStatRouteTimeout	1.3.6.1.4.1.1872.2.5.3.2.13.7	Counter32	read-only	The total number of RIP route timeouts.
G32 routeStatEntries	1.3.6.1.4.1.1872.2.5.3.2.3.1	Gauge32	read-only	The current number of IP routes.
G32 routeStatHighWater	1.3.6.1.4.1.1872.2.5.3.2.3.2	Gauge32	read-only	The highest number of IP routes.
G32 routeStatMaxEntries	1.3.6.1.4.1.1872.2.5.3.2.3.3	Gauge32	read-only	The maximum number of IP routes.
routeStats	1.3.6.1.4.1.1872.2.5.3.2.3
INT routeTableClear	1.3.6.1.4.1.1872.2.5.3.3.1.2	INTEGER	read-write	Setting this value to clear(2) clears the route table.
C32 tcpStatCurConn	1.3.6.1.4.1.1872.2.5.3.2.14.1	Counter32	read-only	The total number of outstanding TCP sessions that are currently opened.
C32 tcpStatCurInConn	1.3.6.1.4.1.1872.2.5.3.2.14.2	Counter32	read-only	The total number of remotely-initiated TCP connections.
C32 tcpStatCurOutConn	1.3.6.1.4.1.1872.2.5.3.2.14.3	Counter32	read-only	The total number of switch-originated TCP connection requests.
tcpStats	1.3.6.1.4.1.1872.2.5.3.2.14
vrrpCfg	1.3.6.1.4.1.1872.2.5.3.1.6
INT vrrpCurCfgGenHoldoff	1.3.6.1.4.1.1872.2.5.3.1.6.1.19	INTEGER	read-only	The time for VRRP virtual router to hold before it begins to change state to backup or master state.
INT vrrpCurCfgGenHotstandby	1.3.6.1.4.1.1872.2.5.3.1.6.1.15	INTEGER	read-only	Enable or disable hotstandby processing.
INT vrrpCurCfgGenState	1.3.6.1.4.1.1872.2.5.3.1.6.1.1	INTEGER	read-only	Enable or disable VRRP operation globally.
INT vrrpCurCfgGenTckHsrpInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.13	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements.
INT vrrpCurCfgGenTckHsrvInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.17	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN.
INT vrrpCurCfgGenTckIpIntfInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.5	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
INT vrrpCurCfgGenTckL4PortInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.9	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgGenTckRServerInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.11	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router.
INT vrrpCurCfgGenTckVirtRtrInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.3	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
INT vrrpCurCfgGenTckVlanPortInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.7	INTEGER	read-only	The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
INT vrrpCurCfgIfAuthType	1.3.6.1.4.1.1872.2.5.3.1.6.6.1.2	INTEGER	read-only	Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpCurCfgIfPasswd for authentication.
I32 vrrpCurCfgIfIndx	1.3.6.1.4.1.1872.2.5.3.1.6.6.1.1	Integer32	read-only	The VRRP interface index. This is eqivalent to IfIndex.
IP vrrpCurCfgIfIpAddr	1.3.6.1.4.1.1872.2.5.3.1.6.6.1.4	IpAddress	read-only	The IP address of the VRRP interface.This is eqivalent to ipCurCfgIntfAddr.
STR vrrpCurCfgIfPasswd	1.3.6.1.4.1.1872.2.5.3.1.6.6.1.3	DisplayString	read-only	The password for authentication.
vrrpCurCfgIfTable	1.3.6.1.4.1.1872.2.5.3.1.6.6		not-accessible	The table of VRRP interface configuration in current_config.
vrrpCurCfgIfTableEntry	1.3.6.1.4.1.1872.2.5.3.1.6.6.1		not-accessible	Information about a VRRP interface.
IP vrrpCurCfgVirtRtrAddr	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.3	IpAddress	read-only	The VRRP virtual router IP address.
INT vrrpCurCfgVirtRtrGrpID	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.2	INTEGER	read-only	The VRRP virtual router identifier.
I32 vrrpCurCfgVirtRtrGrpIfIndex	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.3	Integer32	read-only	The IfIndex that the VRRP virtual router is representing.
I32 vrrpCurCfgVirtRtrGrpIndx	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.1	Integer32	read-only	The VRRP virtual router table index.
INT vrrpCurCfgVirtRtrGrpInterval	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.4	INTEGER	read-only	The time interval between VRRP advertisements in seconds.
INT vrrpCurCfgVirtRtrGrpIpv6Interval	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.17	INTEGER	read-only	The time interval between IPv6 VRRP advertisements in seconds.
INT vrrpCurCfgVirtRtrGrpPreempt	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.6	INTEGER	read-only	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
INT vrrpCurCfgVirtRtrGrpPriority	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.5	INTEGER	read-only	The priority value to be used by the specified VRRP virtual routers.
INT vrrpCurCfgVirtRtrGrpSharing	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.8	INTEGER	read-only	Enable or disable load sharing of non-master virtual router.
INT vrrpCurCfgVirtRtrGrpState	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.7	INTEGER	read-only	Enable or disable the VRRP virtual router.
vrrpCurCfgVirtRtrGrpTable	1.3.6.1.4.1.1872.2.5.3.1.6.9		not-accessible	The table of VRRP virtual router group in current_config.
vrrpCurCfgVirtRtrGrpTableEntry	1.3.6.1.4.1.1872.2.5.3.1.6.9.1		not-accessible	Information about a VRRP failover virtual router.
INT vrrpCurCfgVirtRtrGrpTckHsrp	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.14	INTEGER	read-only	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrGrpTckHsrv	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.15	INTEGER	read-only	Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrGrpTckIpIntf	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.10	INTEGER	read-only	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
INT vrrpCurCfgVirtRtrGrpTckL4Port	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.12	INTEGER	read-only	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrGrpTckRServer	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.13	INTEGER	read-only	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrGrpTckVirtRtr	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.9	INTEGER	read-only	Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
INT vrrpCurCfgVirtRtrGrpTckVlanPort	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.11	INTEGER	read-only	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
INT vrrpCurCfgVirtRtrGrpVersion	1.3.6.1.4.1.1872.2.5.3.1.6.9.1.16	INTEGER	read-only	The VRRP virtual router group IP Version.
INT vrrpCurCfgVirtRtrID	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.2	INTEGER	read-only	The VRRP virtual router identifier.
I32 vrrpCurCfgVirtRtrIfIndex	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.4	Integer32	read-only	The IfIndex that the VRRP virtual router is representing.
I32 vrrpCurCfgVirtRtrIndx	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.1	Integer32	read-only	The VRRP virtual router table index.
INT vrrpCurCfgVirtRtrInterval	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.5	INTEGER	read-only	The time interval between VRRP advertisements in seconds.
STR vrrpCurCfgVirtRtrIpv6Addr	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.18	DisplayString	read-only	The IPv6 address of the virtual router. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
INT vrrpCurCfgVirtRtrIpv6Interval	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.19	INTEGER	read-only	The time interval between VRRP advertisements in seconds.
INT vrrpCurCfgVirtRtrPreempt	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.7	INTEGER	read-only	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
INT vrrpCurCfgVirtRtrPriority	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.6	INTEGER	read-only	The priority value to be used by the specified VRRP virtual routers.
INT vrrpCurCfgVirtRtrSharing	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.9	INTEGER	read-only	Enable or disable load sharing of non-master virtual router.
INT vrrpCurCfgVirtRtrState	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.8	INTEGER	read-only	Enable or disable the VRRP virtual router.
vrrpCurCfgVirtRtrTable	1.3.6.1.4.1.1872.2.5.3.1.6.3		not-accessible	The table of VRRP virtual routers configuration in current_config.
vrrpCurCfgVirtRtrTableEntry	1.3.6.1.4.1.1872.2.5.3.1.6.3.1		not-accessible	Information about a VRRP virtual router.
INT vrrpCurCfgVirtRtrTckHsrp	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.15	INTEGER	read-only	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrTckHsrv	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.16	INTEGER	read-only	Enable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrTckIpIntf	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.11	INTEGER	read-only	Enable or disable tracking other router interfaces for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
INT vrrpCurCfgVirtRtrTckL4Port	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.13	INTEGER	read-only	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrTckRServer	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.14	INTEGER	read-only	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrTckVirtRtr	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.10	INTEGER	read-only	Enable or disable tracking other virtual routers for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVirtRtrInc.
INT vrrpCurCfgVirtRtrTckVlanPort	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.12	INTEGER	read-only	Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
INT vrrpCurCfgVirtRtrVersion	1.3.6.1.4.1.1872.2.5.3.1.6.3.1.17	INTEGER	read-only	The VRRP virtual router IP Version.
INT vrrpCurCfgVirtRtrVrGrpAdd	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.13	INTEGER	read-only	Specify virtual router number which needs to be added to group.
INT vrrpCurCfgVirtRtrVrGrpAdverInterval	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.14	INTEGER	read-only	The advertisement interval for virtual router group.
OCT vrrpCurCfgVirtRtrVrGrpBmap	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.4	OCTET STRING	read-only	The virtual routers added for to this VRRP vrgroup. The selected virtual routers are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Virtual Router 9 \|\| \|\| \|\| \|\|___ Virtual Router 8 \|\| \|____ Virtual Router 7 \|\| . . . \|\|_________ Virtual Router 2 \|__________ Virtual Router 1 where x : 1 - The represented Virtual Router is added 0 - The represented Virtual Router is not added
I32 vrrpCurCfgVirtRtrVrGrpIndx	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.1	Integer32	read-only	The VRRP virtual router vrgroup table index.
STR vrrpCurCfgVirtRtrVrGrpName	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.2	DisplayString	read-only	The VRRP virtual router vrgroup name.
INT vrrpCurCfgVirtRtrVrGrpPreemption	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.15	INTEGER	read-only	Enable/Disable preemption for virtual router group.
INT vrrpCurCfgVirtRtrVrGrpPriority	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.5	INTEGER	read-only	The priority value to be used by the specified VRRP virtual routers.
INT vrrpCurCfgVirtRtrVrGrpSharing	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.16	INTEGER	read-only	Enable/Disable sharing for virtual router group.
INT vrrpCurCfgVirtRtrVrGrpState	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.3	INTEGER	read-only	Enable or disable VRRP Vrgroup state
vrrpCurCfgVirtRtrVrGrpTable	1.3.6.1.4.1.1872.2.5.3.1.6.12		not-accessible	The table of VRRP virtual router vrgroup configuration in the current config.
vrrpCurCfgVirtRtrVrGrpTableEntry	1.3.6.1.4.1.1872.2.5.3.1.6.12.1		not-accessible	Information about setting VRRP virtual router vrgroup.
INT vrrpCurCfgVirtRtrVrGrpTckHsrp	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.10	INTEGER	read-only	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrVrGrpTckHsrv	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.11	INTEGER	read-only	Enable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrVrGrpTckIpIntf	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.6	INTEGER	read-only	Enable or disable tracking interfaces in vrgroup for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
INT vrrpCurCfgVirtRtrVrGrpTckL4Port	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.8	INTEGER	read-only	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrVrGrpTckRServer	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.9	INTEGER	read-only	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpCurCfgVirtRtrVrGrpTckVirtRtrNo	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.12	INTEGER	read-only	The track virtual router for group.
INT vrrpCurCfgVirtRtrVrGrpTckVlanPort	1.3.6.1.4.1.1872.2.5.3.1.6.12.1.7	INTEGER	read-only	Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
vrrpGeneral	1.3.6.1.4.1.1872.2.5.3.1.6.1
I32 vrrpIfTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.6.5	Integer32	read-only	The maximum number of entries in VRRP interface table.
vrrpInfo	1.3.6.1.4.1.1872.2.5.3.3.3
I32 vrrpInfoVirtRtrIndex	1.3.6.1.4.1.1872.2.5.3.3.3.1.1.1	Integer32	read-only	The VRRP virtual router index.
INT vrrpInfoVirtRtrOwnership	1.3.6.1.4.1.1872.2.5.3.3.3.1.1.3	INTEGER	read-only	The VRRP virtual router ownership status.
I32 vrrpInfoVirtRtrPriority	1.3.6.1.4.1.1872.2.5.3.3.3.1.1.6	Integer32	read-only	The VRRP virtual router priority.
INT vrrpInfoVirtRtrProxy	1.3.6.1.4.1.1872.2.5.3.3.3.1.1.5	INTEGER	read-only	The VRRP proxy state identifies virtual proxy routers.
INT vrrpInfoVirtRtrServer	1.3.6.1.4.1.1872.2.5.3.3.3.1.1.4	INTEGER	read-only	The VRRP server state identifies virtual routers that support Layer 4 services.
INT vrrpInfoVirtRtrState	1.3.6.1.4.1.1872.2.5.3.3.3.1.1.2	INTEGER	read-only	The VRRP virtual router state.
vrrpInfoVirtRtrTable	1.3.6.1.4.1.1872.2.5.3.3.3.1		not-accessible	The table of VRRP virtual router run-time information.
vrrpInfoVirtRtrTableEntry	1.3.6.1.4.1.1872.2.5.3.3.3.1.1		not-accessible	The run-time information about a VRRP virtual router.
INT vrrpNewCfgGenHoldoff	1.3.6.1.4.1.1872.2.5.3.1.6.1.20	INTEGER	read-write	The time for VRRP virtual router to hold before it begins to change state to backup or master state.
INT vrrpNewCfgGenHotstandby	1.3.6.1.4.1.1872.2.5.3.1.6.1.16	INTEGER	read-write	Enable or disable hotstandby processing.
INT vrrpNewCfgGenState	1.3.6.1.4.1.1872.2.5.3.1.6.1.2	INTEGER	read-write	Enable or disable VRRP operation globally.
INT vrrpNewCfgGenTckHsrpInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.14	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements.
INT vrrpNewCfgGenTckHsrvInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.18	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the HSRP advertisements by VLAN.
INT vrrpNewCfgGenTckIpIntfInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.6	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other router interfaces.
INT vrrpNewCfgGenTckL4PortInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.10	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the Layer 4 port states. This is valid when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgGenTckRServerInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.12	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of real servers under the virtual server which is configured as a VRRP virtual router.
INT vrrpNewCfgGenTckVirtRtrInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.4	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the state of other virtual routers.
INT vrrpNewCfgGenTckVlanPortInc	1.3.6.1.4.1.1872.2.5.3.1.6.1.8	INTEGER	read-write	The increment of VRRP virtual router priority. The priority is adjusted by tracking the port state of ports that belongs to the same virtual LAN as the virtual router.
INT vrrpNewCfgIfAuthType	1.3.6.1.4.1.1872.2.5.3.1.6.7.1.2	INTEGER	read-create	Type of authentication being used. none(1) - no authentication simple-text-password(2) - use password specified in vrrpNewCfgIfPasswd for authentication.
INT vrrpNewCfgIfDelete	1.3.6.1.4.1.1872.2.5.3.1.6.7.1.4	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
I32 vrrpNewCfgIfIndx	1.3.6.1.4.1.1872.2.5.3.1.6.7.1.1	Integer32	read-only	The VRRP interface index. This is eqivalent to IfIndex.
STR vrrpNewCfgIfPasswd	1.3.6.1.4.1.1872.2.5.3.1.6.7.1.3	DisplayString	read-create	The password for authentication.
vrrpNewCfgIfTable	1.3.6.1.4.1.1872.2.5.3.1.6.7		not-accessible	The table of VRRP interface configuration in current_config.
vrrpNewCfgIfTableEntry	1.3.6.1.4.1.1872.2.5.3.1.6.7.1		not-accessible	Information about a VRRP interface.
IP vrrpNewCfgVirtRtrAddr	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.3	IpAddress	read-create	The VRRP virtual router IP address.
INT vrrpNewCfgVirtRtrDelete	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.9	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
INT vrrpNewCfgVirtRtrGrpDelete	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.8	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than delete(2) has no effect on the state of the row.
INT vrrpNewCfgVirtRtrGrpID	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.2	INTEGER	read-create	The VRRP virtual router identifier.
I32 vrrpNewCfgVirtRtrGrpIfIndex	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.3	Integer32	read-create	The IfIndex that the VRRP virtual router is representing.
I32 vrrpNewCfgVirtRtrGrpIndx	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.1	Integer32	read-only	The VRRP virtual router table index.
INT vrrpNewCfgVirtRtrGrpInterval	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.4	INTEGER	read-create	The time interval between VRRP advertisements in seconds.
INT vrrpNewCfgVirtRtrGrpIpv6Interval	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.18	INTEGER	read-create	The time interval between IPv6 VRRP advertisements in seconds.
INT vrrpNewCfgVirtRtrGrpPreempt	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.6	INTEGER	read-create	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
INT vrrpNewCfgVirtRtrGrpPriority	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.5	INTEGER	read-create	The priority value to be used by the specified VRRP virtual router.
INT vrrpNewCfgVirtRtrGrpSharing	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.9	INTEGER	read-create	Enable or disable load sharing of non-master virtual router.
INT vrrpNewCfgVirtRtrGrpState	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.7	INTEGER	read-create	Enable or disable the VRRP virtual router.
vrrpNewCfgVirtRtrGrpTable	1.3.6.1.4.1.1872.2.5.3.1.6.10		not-accessible	The table of VRRP virtual router group configuration in new_config.
vrrpNewCfgVirtRtrGrpTableEntry	1.3.6.1.4.1.1872.2.5.3.1.6.10.1		not-accessible	Information about a VRRP failover virtual router.
INT vrrpNewCfgVirtRtrGrpTckHsrp	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.15	INTEGER	read-create	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrGrpTckHsrv	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.16	INTEGER	read-create	Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrGrpTckIpIntf	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.11	INTEGER	read-create	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
INT vrrpNewCfgVirtRtrGrpTckL4Port	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.13	INTEGER	read-create	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrGrpTckRServer	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.14	INTEGER	read-create	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrGrpTckVirtRtr	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.10	INTEGER	read-create	Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
INT vrrpNewCfgVirtRtrGrpTckVlanPort	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.12	INTEGER	read-create	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
INT vrrpNewCfgVirtRtrGrpVersion	1.3.6.1.4.1.1872.2.5.3.1.6.10.1.17	INTEGER	read-create	The VRRP virtual router group IP Version.
INT vrrpNewCfgVirtRtrID	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.2	INTEGER	read-create	The VRRP virtual router identifier.
I32 vrrpNewCfgVirtRtrIfIndex	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.4	Integer32	read-create	The IfIndex that the VRRP virtual router is representing.
I32 vrrpNewCfgVirtRtrIndx	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.1	Integer32	read-only	The VRRP virtual router table index.
INT vrrpNewCfgVirtRtrInterval	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.5	INTEGER	read-create	The time interval between VRRP advertisements in seconds.
STR vrrpNewCfgVirtRtrIpv6Addr	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.19	DisplayString	read-create	The IPv6 address of the virtual router. Address should be 4-byte haxadecimal colon notation. Valid IPv6 address should be in any of the following forms xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or xxxx::xxxx:xxxx:xxxx:xxxx or ::xxxx
INT vrrpNewCfgVirtRtrIpv6Interval	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.20	INTEGER	read-create	The time interval between VRRP advertisements in seconds.
INT vrrpNewCfgVirtRtrPreempt	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.7	INTEGER	read-create	This is for controlling whether a higher priority Backup VRRP virtual router preempts a low priority Master. enabled(1) - allow preemption disabled(2) - prohibit preemption
INT vrrpNewCfgVirtRtrPriority	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.6	INTEGER	read-create	The priority value to be used by the specified VRRP virtual router.
INT vrrpNewCfgVirtRtrSharing	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.10	INTEGER	read-create	Enable or disable load sharing of non-master virtual router.
INT vrrpNewCfgVirtRtrState	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.8	INTEGER	read-create	Enable or disable the VRRP virtual router.
vrrpNewCfgVirtRtrTable	1.3.6.1.4.1.1872.2.5.3.1.6.4		not-accessible	The table of VRRP virtual routers configuration in current_config.
vrrpNewCfgVirtRtrTableEntry	1.3.6.1.4.1.1872.2.5.3.1.6.4.1		not-accessible	Information about a VRRP virtual router.
INT vrrpNewCfgVirtRtrTckHsrp	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.16	INTEGER	read-create	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrTckHsrv	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.17	INTEGER	read-create	Enable or disable tracking HSRP by VLAN advertisements for priority adjustment. The priority increment is defined in vrrpNewCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrTckIpIntf	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.12	INTEGER	read-create	Enable or disable tracking other router interfaces for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckIpIntfInc.
INT vrrpNewCfgVirtRtrTckL4Port	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.14	INTEGER	read-create	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrTckRServer	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.15	INTEGER	read-create	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrTckVirtRtr	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.11	INTEGER	read-create	Enable or disable tracking other virtual routers for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVirtRtrInc.
INT vrrpNewCfgVirtRtrTckVlanPort	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.13	INTEGER	read-create	Enable or disable tracking port state of VLAN ports for priority adjustment. the priority increment is defined in vrrpNewCfgGenTckVlanPortInc.
INT vrrpNewCfgVirtRtrVersion	1.3.6.1.4.1.1872.2.5.3.1.6.4.1.18	INTEGER	read-create	The VRRP virtual router IP Version.
INT vrrpNewCfgVirtRtrVrGrpAdd	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.3	INTEGER	read-create	The VRRP virtual router to be added to this vrgroup table.
INT vrrpNewCfgVirtRtrVrGrpAdverInterval	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.16	INTEGER	read-create	The advertisement interval for virtual router group.
OCT vrrpNewCfgVirtRtrVrGrpBmap	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.7	OCTET STRING	read-only	The virtual routers added to this VRRP vrgroup. The selected virtual routers are presented in a bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... \|\| \|\| \|_ Virtual Router 9 \|\| \|\| \|\| \|\|___ Virtual Router 8 \|\| \|____ Virtual Router 7 \|\| . . . \|\|_________ Virtual Router 2 \|__________ Virtual Router 1 where x : 1 - The represented Virtual Router is added 0 - The represented Virtual Router is not added
INT vrrpNewCfgVirtRtrVrGrpDelete	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.6	INTEGER	read-create	When set to the value of 2 (delete), the entire row is deleted. When read, other(1) is returned. Setting the value to anything other than 2(delete) has no effect on the state of the row.
I32 vrrpNewCfgVirtRtrVrGrpIndx	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.1	Integer32	read-only	The VRRP virtual router vrgroup table index.
STR vrrpNewCfgVirtRtrVrGrpName	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.2	DisplayString	read-create	The VRRP virtual router vrgroup name.
INT vrrpNewCfgVirtRtrVrGrpPreemption	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.17	INTEGER	read-create	Enable/Disable preemption for virtual router group.
INT vrrpNewCfgVirtRtrVrGrpPriority	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.8	INTEGER	read-create	The priority value to be used by the specified VRRP virtual routers.
INT vrrpNewCfgVirtRtrVrGrpRem	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.4	INTEGER	read-create	The VRRP virtual router to be removed from this vrgroup table.
INT vrrpNewCfgVirtRtrVrGrpSharing	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.18	INTEGER	read-create	Enable/Disable sharing for virtual router group.
INT vrrpNewCfgVirtRtrVrGrpState	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.5	INTEGER	read-create	Enable or disable VRRP Vrgroup state
vrrpNewCfgVirtRtrVrGrpTable	1.3.6.1.4.1.1872.2.5.3.1.6.13		not-accessible	The table of VRRP virtual router vrgroup configuration in new_config.
vrrpNewCfgVirtRtrVrGrpTableEntry	1.3.6.1.4.1.1872.2.5.3.1.6.13.1		not-accessible	Information about setting VRRP virtual router Vrgroup.
INT vrrpNewCfgVirtRtrVrGrpTckHsrp	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.13	INTEGER	read-create	Enable or disable tracking HSRP advertisements for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckHsrpInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrVrGrpTckHsrv	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.14	INTEGER	read-create	Enable or disable tracking HSRP advertisements by VLAN for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckHsrvInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrVrGrpTckIpIntf	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.9	INTEGER	read-create	Enable or disable tracking interfaces in vrgroup for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckIpIntfInc.
INT vrrpNewCfgVirtRtrVrGrpTckL4Port	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.11	INTEGER	read-create	Enable or disable tracking Layer 4 port states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckL4PortInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrVrGrpTckRServer	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.12	INTEGER	read-create	Enable or disable tracking real server states for priority adjustment. the priority increment is defined in vrrpCurCfgGenTckRServerInc. This is applied when virtual server is configured as a VRRP virtual router.
INT vrrpNewCfgVirtRtrVrGrpTckVirtRtrNo	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.15	INTEGER	read-create	The track virtual router for group.
INT vrrpNewCfgVirtRtrVrGrpTckVlanPort	1.3.6.1.4.1.1872.2.5.3.1.6.13.1.10	INTEGER	read-create	Enable or disable tracking port state of VLAN ports for priority adjustment. The priority increment is defined in vrrpCurCfgGenTckVlanPortInc.
vrrpOper	1.3.6.1.4.1.1872.2.5.3.4.1
INT vrrpOperVirtRtrBackup	1.3.6.1.4.1.1872.2.5.3.4.1.1.1.2	INTEGER	read-write	When set to a value of 'backup(2)' it forces the specified master virtual router into backup mode. 'ok(1)' is returned when the object os read.
vrrpOperVirtRtrEntry	1.3.6.1.4.1.1872.2.5.3.4.1.1.1		not-accessible	A row in the vrrpOperVirtRtrTable
INT vrrpOperVirtRtrGroupBackup	1.3.6.1.4.1.1872.2.5.3.4.1.2	INTEGER	read-write	When set to a value of 'backup(2)' it forces the specified master virtual router group into backup mode. 'ok(1)' is returned when the object os read.
I32 vrrpOperVirtRtrIndex	1.3.6.1.4.1.1872.2.5.3.4.1.1.1.1	Integer32	read-only	The index for the VRRP virtual router.
vrrpOperVirtRtrTable	1.3.6.1.4.1.1872.2.5.3.4.1.1		not-accessible	An entry in the table of virtual routers.
C32 vrrpStatInAdvers	1.3.6.1.4.1.1872.2.5.3.2.5.1	Counter32	read-only	The number of good VRRP advertisements which are received.
C32 vrrpStatOutAdvers	1.3.6.1.4.1.1872.2.5.3.2.5.2	Counter32	read-only	The number of good VRRP advertisements which are transmitted.
C32 vrrpStatOutBadAdvers	1.3.6.1.4.1.1872.2.5.3.2.5.3	Counter32	read-only	The number of bad VRRP advertisements which are received.
vrrpStats	1.3.6.1.4.1.1872.2.5.3.2.5
I32 vrrpVirtRtrGrpTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.6.8	Integer32	read-only	The maximum number of entries in VRRP Group table.
I32 vrrpVirtRtrTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.6.2	Integer32	read-only	The maximum number of entries in VRRP virtual router table.
I32 vrrpVirtRtrVrGrpTableMaxSize	1.3.6.1.4.1.1872.2.5.3.1.6.11	Integer32	read-only	The maximum number of entries in VRRP VrGroup table.

RFC description

Alteon vendor-private MIB for Cheetah network switches; manages load balancing, traffic control, and network fabric configuration.

Start monitoring Alteon (Nortel/Radware) Cheetah-based application switches (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALTEON-CHEETAH-NETWORK-MIB