ALCATEL-IND1-TRAP-MGR-MIB

All MIBs › ALCATEL-IND1-TRAP-MGR-MIB

Organization: Alcatel-Lucent

Last Updated: 2010-05-13

Category: Device Management, SNMP Framework, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch trap manager MIB for managing SNMP trap filters, relay stations, and notification configurations.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-TRAP-MGR-MIB?

ALCATEL-IND1-TRAP-MGR-MIB is an Alcatel enterprise MIB for the 'Birds of Prey' product line (the OmniSwitch family), covering the trap manager subsystem of the switch's SNMP agent. It exposes configuration data for trap filtering by family/type, trap suppression timing, and a table of remote trap relay stations (destination IP, port, and row status). Rather than reporting raw hardware sensors, it governs how the device reports its own hardware and software fault conditions to management stations, so it directly controls the reliability of alarms about link state, environmental faults, and other subsystem failures elsewhere in the switch. It builds on the standard SNMP notification framework, layering Alcatel-specific trap-family and relay-station semantics on top of the usual SNMPv2 trap mechanism. It is typically deployed in enterprise campus networks running Alcatel OmniSwitch equipment where centralized fault management depends on correctly routed and de-duplicated traps. Engineers can download the ALCATEL-IND1-TRAP-MGR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-TRAP-MGR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel OmniSwitch switches
Alcatel 'Birds of Prey' product line network devices

Monitoring Examples

An administrator would inspect trapConfigTable/trapConfigEntry rows (trapIndex, trapName, trapFamily, trapAbsorbPeriod) to see which trap types are enabled and how long duplicate traps are suppressed after the first occurrence. The trapStationTable/trapStationEntry rows (trapStationIP, trapStationPort, trapStationRowStatus) identify where traps are relayed; a trapStationRowStatus stuck in 'notInService' or an unreachable trapStationIP would reveal that a fault-notification destination has silently stopped receiving alerts. Polling trapAbsorbPeriod values also helps confirm that a flapping condition isn't being masked by an overly long absorption window.

What Can Be Monitored

configured trap filters by trap family
trap absorption/suppression period
trap relay station IP address and port
trap relay station row status (active/inactive)
trap name-to-index mapping

Imported Objects

From ALCATEL-IND1-BASE

softentIND1TrapMgr

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1TrapMgrMIB	1.3.6.1.4.1.6486.801.1.2.1.2.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Trap Manager Subsystem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1TrapMgrMIBNotifications	1.3.6.1.4.1.6486.801.1.2.1.2.1.0			Branch For TrapMgr MIB Subsystem Notifications.
NTF trapAbsorptionTrap	1.3.6.1.4.1.6486.801.1.2.1.2.1.0.1			The absorption Trap is sent when a trap has been absorbed at least once.
alcatelIND1TrapMgrMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.2.1.1			Branch For Trap Manager Subsystem Managed Objects.
trapMgt	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1
trapConfigTable	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.1		not-accessible	The trap configuration table.
trapConfigEntry	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.1.1		not-accessible	A trap configuration entry.
I32 trapIndex	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.1.1.1	Integer32	read-only	Trap identifier.
STR trapName	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.1.1.2	SnmpAdminString	read-only	Trap name.
STR trapFamily	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.1.1.3	SnmpAdminString	read-only	Trap family name.
I32 trapAbsorbPeriod	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.1.1.4	Integer32	read-only	at maximum, one instance of this trap is sent out within the period. value 0 : the trap is not absorbed.
trapStationTable	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2		not-accessible	A list of management stations.
trapStationEntry	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1		not-accessible	A management station entry.
IP trapStationIP	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.1	IpAddress	read-only	The IP address of this management entity.
U32 trapStationPort	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.2	Unsigned32	read-create	The UDP port used by this management entity. This defaults to the SNMP-TRAP port 162.
ROW trapStationRowStatus	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.3	RowStatus	read-create	Reading or writting values : - active (1) : traps enabled to the station - notInService (2) : traps disabled to the station Only reading values : - notReady (3) : missing parameters for the station Only writting values : - createAndGo (4) : to create an active station - createAndWait (5) : to create a notInService station - destroy (6) : to remove a station.
INT trapStationProtocol	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.4	INTEGER	read-create	The type of protocol used to send the traps to the station. The different values are : v1 : the traps are sent using SNMPv1. v2 : the traps are sent using SNMPv2. v3 : the traps are sent using SNMPv3.
STR trapStationUser	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.5	SnmpAdminString	read-create	User name used to send the trap to the station. This name must correspond to an existing user account name.
U32 trapStationReplay	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.6	Unsigned32	read-create	The replay value. The switch is required to send the last known traps for this station from the replay value.
U32 trapStationNextSeq	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.2.1.7	Unsigned32	read-only	The sequence number of the next trap generated for this station.
trapFilterTable	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.3		not-accessible	The trap filtering table for each individual trap.
trapFilterEntry	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.3.1		not-accessible	A trap filter entry.
INT trapFilterStatus	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.3.1.1	INTEGER	read-write	For the individual filtering : on : the filter is activated, the traps identified by trapFilterId can not be sent to the SNMP manager identified by trapStationIP. off : no filter is activated.
INT trapAbsorption	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.4	INTEGER	read-write	enable : the trap absorption service is enabled disable : the trap absorption service is disabled.
INT trapToWebView	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.5	INTEGER	read-write	enable : the traps are forwarded to WebView disable : the traps are not forwarded to WebView.
alaTrapInetStationTable	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6		not-accessible	A list of management stations.
alaTrapInetStationEntry	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1		not-accessible	A management station entry.
IPt alaTrapInetStationIPType	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.1	InetAddressType	not-accessible	The value of alaTrapInetStationIPType indicates the IP address type for alaTrapInetStationIP.
IP alaTrapInetStationIP	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.2	InetAddress	not-accessible	The IP address of this management entity. The address type of alaTrapInetStationIP is indicated by alaTrapInetStationIPType.
U32 alaTrapInetStationPort	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.3	Unsigned32	read-create	The UDP port used by this management entity. This defaults to the SNMP-TRAP port 162.
ROW alaTrapInetStationRowStatus	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.4	RowStatus	read-create	Reading or writting values : - active (1) : traps enabled to the station - notInService (2) : traps disabled to the station Only reading values : - notReady (3) : missing parameters for the station Only writting values : - createAndGo (4) : to create an active station - createAndWait (5) : to create a notInService station - destroy (6) : to remove a station.
INT alaTrapInetStationProtocol	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.5	INTEGER	read-create	The type of protocol used to send the traps to the station. The different values are : v1 : the traps are sent using SNMPv1. v2 : the traps are sent using SNMPv2. v3 : the traps are sent using SNMPv3.
STR alaTrapInetStationUser	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.6	SnmpAdminString	read-create	User name used to send the trap to the station. This name must correspond to an existing user account name.
U32 alaTrapInetStationReplay	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.7	Unsigned32	read-create	The replay value. The switch is required to send the last known traps for this station from the replay value.
U32 alaTrapInetStationNextSeq	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.6.1.8	Unsigned32	read-only	The sequence number of the next trap generated for this station.
alaTrapInetFilterTable	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.7		not-accessible	The trap filtering table for each individual trap.
alaTrapInetFilterEntry	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.7.1		not-accessible	A trap filter entry.
INT alaTrapInetFilterStatus	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.1.7.1.1	INTEGER	read-write	For the individual filtering : on : the filter is activated, the traps identified by trapFilterId can not be sent to the SNMP manager identified by alaTrapInetStationIP. off : no filter is activated.
trapNotif	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.3
U32 trapAbsorStamp	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.3.1	Unsigned32	accessible-for-notify	The time stamp of the absorbed trap.
I32 trapAbsorTrapId	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.3.2	Integer32	accessible-for-notify	The trap identifier of the absorbed trap.
U32 trapAbsorCounter	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.3.3	Unsigned32	accessible-for-notify	The number of the iterations of the absorbed trap.
U32 trapAbsorTime	1.3.6.1.4.1.6486.801.1.2.1.2.1.1.3.4	Unsigned32	accessible-for-notify	The time stamp of the last iteration.
alcatelIND1TrapMgrMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.2.1.2			Branch For Trap Manager Subsystem Conformance Information.
alcatelIND1TrapMgrMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.2.1.2.1			Branch For Trap Manager Subsystem Units Of Conformance.
trapMgtGroup	1.3.6.1.4.1.6486.801.1.2.1.2.1.2.1.1			Collection of objects for Trap Management.
trapTrapsGroup	1.3.6.1.4.1.6486.801.1.2.1.2.1.2.1.2			Collection of notifications for Trap Management.
trapNotifGroup	1.3.6.1.4.1.6486.801.1.2.1.2.1.2.1.3			Collection of objects for Trap Management notifications.
alcatelIND1TrapMgrMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.2.1.2.2			Branch For SNMP Agent Subsystem Compliance Statements.
alcatelIND1TrapMgrMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.2.1.2.2.1			Compliance statement for Trap Manager Subsystem.

RFC description

SNMP trap manager subsystem for Birds Of Prey devices.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-TRAP-MGR-MIB

What Is ALCATEL-IND1-TRAP-MGR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description