ALCATEL-IND1-TIMETRA-SDP-MIB :: sdpBindTlsIgnoreStandbySig

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsALCATEL-IND1-TIMETRA-SDP-MIBsdpBindTlsIgnoreStandbySig

sdpBindTlsIgnoreStandbySig

Module: ALCATEL-IND1-TIMETRA-SDP-MIB

OID (symbolic): ALCATEL-IND1-TIMETRA-SDP-MIB::sdpBindTlsIgnoreStandbySig

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.4.4.6.1.48

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: The value of sdpBindTlsIgnoreStandbySig specifies whether the local internal tasks will take into account the 'pseudo-wire forwarding standby' bit received from the LDP peer which is normally ignored.

When set to 'true', this bit is not considered in the internal tasks.

A similar object svcEndPointIgnoreStandbySig is present at the endpoint level. If this spoke-SDP is part of that explicit endpoint, this object will be set to the value of svcEndPointIgnoreStandbySig and its value will not allowed to be changed.

This spoke-SDP can be made part of an explicit-endpoint only if the setting of this object is not conflicting with the setting of svcEndPointIgnoreStandbySig object.

What is sdpBindTlsIgnoreStandbySig?

Controls whether the local device ignores the 'pseudo-wire forwarding standby' bit received from the LDP peer on this TLS spoke SDP binding. When enabled, the standby signal from the peer is disregarded, allowing local tasks to make forwarding decisions independently of the peer's standby indication.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.4.6.1.48
snmpwalk -v2c -c public <target> ALCATEL-IND1-TIMETRA-SDP-MIB::sdpBindTlsIgnoreStandbySig

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.4.6.1.48.1
snmpget -v2c -c public <target> ALCATEL-IND1-TIMETRA-SDP-MIB::sdpBindTlsIgnoreStandbySig.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.6527.3.1.2.4.4.6.1.48.1 s <value>

Start monitoring Nokia (Alcatel-Lucent) 7750 SR-series service routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-TIMETRA-SDP-MIB::sdpBindTlsIgnoreStandbySig OID value, configure state conditions and alerts, and monitor any Nokia (Alcatel-Lucent) 7750 SR-series service routers from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2.4tmnxServObjsALCATEL-IND1-TIMETRA-SERV-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.4.4tmnxSdpObjsALCATEL-IND1-TIMETRA-SDP-MIB
1.3.6.1.4.1.6527.3.1.2.4.4.6sdpBindTlsTableALCATEL-IND1-TIMETRA-SDP-MIB
1.3.6.1.4.1.6527.3.1.2.4.4.6.1sdpBindTlsEntryALCATEL-IND1-TIMETRA-SDP-MIB
1.3.6.1.4.1.6527.3.1.2.4.4.6.1.48sdpBindTlsIgnoreStandbySigALCATEL-IND1-TIMETRA-SDP-MIB