All MIBs › ALCATEL-IND1-TIMETRA-OAM-TEST-MIB › tmnxOamPingCtlTestMode
tmnxOamPingCtlTestMode
Module: ALCATEL-IND1-TIMETRA-OAM-TEST-MIB
OID (symbolic): ALCATEL-IND1-TIMETRA-OAM-TEST-MIB::tmnxOamPingCtlTestMode
OID (numeric): 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-create
Description: Specifies the type of OAM ping test defined by this entry. The configuration parameters unique to a specific test type are to be found in an sparsely dependent table extension for that test type.
sdpPing - tests SDP connectivity and round trip time.
mtuPing - tests MTU path size.
svcPing - determines the existence and operative state of the service ID on the far end ESR. NOTE: This is a one-shot test.
macQuery - determines a specific address mapping for the service ID. See tmnxOamMacPingCtlTable for additional parameters. NOTE: This is a one-shot test.
macPing - determines address mappings for the service ID. See tmnxOamMacPingCtlTable for additional parameters.
macPopulate - populates an OAM MAC address into the FIBs. See tmnxOamMacPingCtlTable for additional parameters. NOTE: This is a one-shot test.
macPurge - deletes an OAM MAC address from the FIBs. See tmnxOamMacPingCtlTable for additional parameters. NOTE: This is a one-shot test.
lspPing - tests LSP path connectivity and round trip time. See tmnxOamLspPingCtlTable for additional parameters.
vprnPing - tests IP path connectivity and round trip time within a specified VPRN service. See tmnxOamVprnPingCtlTable for additional parameters.
atmPing - tests ATM path connectivity and round trip time on an ATM VCC. See tmnxOamAtmPingCtlTable for additional parameters.
mfibPing - tests IP multicast connectivity and round trip time within a specified VPLS service. See tmnxOamMfibPingCtlTable for additional parameters.
cpePing - determines IP connectivity to a CPE within a specified VPLS service. See tmnxOamCpePingCtlTable for additional parameters.
mrInfo - Get multicast router's capabilities and the list of interfaces with neighbors.
vccvPing - tests pseudowire connectivity and round trip time. See tmnxOamVccvPingCtlTable for additional parameters.
icmpPing - tests IP connectivity and round trip time. See tmnxOamIcmpPingCtlTable for additional parameters.
dnsPing - tests DNS name resolution connectivity and round trip time.
ancpLoopback - send an OAM loopback test request to the access node. see tmnxOamAncpTestCtlTable for additional parameters.
What is tmnxOamPingCtlTestMode?
This OID specifies the type of OAM ping test to run, such as sdpPing for SDP connectivity, mtuPing for MTU discovery, lspPing for LSP path verification, or other supported test modes. The selected mode determines which additional configuration parameters apply.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6527 | timetra | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3 | timetraProducts | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1 | tmnxSRMIB | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| 1.3.6.1.4.1.6527.3.1.2 | tmnxSRObjs | ALCATEL-IND1-TIMETRA-GLOBAL-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6527.3.1.2.11 | tmnxOamTestObjs | ALCATEL-IND1-TIMETRA-OAM-TEST-MIB |
| 1.3.6.1.4.1.6527.3.1.2.11.1 | tmnxOamPingObjs | ALCATEL-IND1-TIMETRA-OAM-TEST-MIB |
| 1.3.6.1.4.1.6527.3.1.2.11.1.3 | tmnxOamPingCtlTable | ALCATEL-IND1-TIMETRA-OAM-TEST-MIB |
| 1.3.6.1.4.1.6527.3.1.2.11.1.3.1 | tmnxOamPingCtlEntry | ALCATEL-IND1-TIMETRA-OAM-TEST-MIB |
| 1.3.6.1.4.1.6527.3.1.2.11.1.3.1.6 | tmnxOamPingCtlTestMode | ALCATEL-IND1-TIMETRA-OAM-TEST-MIB |