All MIBs › ALCATEL-IND1-CONFIG-MGR-MIB
Organization: Alcatel-Lucent
Last Updated: 2007-04-03
Category: Device Management, Vendor: Alcatel-Lucent
Description: Alcatel OmniSwitch configuration manager MIB for managing configuration file operations and rollback functions.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ALCATEL-IND1-CONFIG-MGR-MIB?
ALCATEL-IND1-CONFIG-MGR-MIB is an Alcatel-Lucent proprietary MIB managing the Configuration Manager subsystem on the Alcatel 'Birds Of Prey' product line. Its objects cover config-file name/action/error-file/status/mode, a timed-config-file trigger (name, time, status) with a clear action, and a rich configuration-snapshot mechanism (filename, action, and per-feature select flags — all, VLAN, spanning tree, QoS, IP, IPX, IPMS, AAA, SNMP, 802.1Q, link aggregation, port mirroring, XIP, health monitor). As a configuration MIB it lets an administrator trigger a selective configuration snapshot (e.g., VLAN and QoS settings only) and confirm the resulting config-file status. It is deployed on the Alcatel 'Birds Of Prey' switch product line. Engineers can download the ALCATEL-IND1-CONFIG-MGR-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-CONFIG-MGR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Alcatel 'Birds Of Prey' switch product line
Monitoring Examples
An administrator triggers configSnapshotAction with configSnapshotVlanSelect and configSnapshotQOSSelect enabled to capture just the VLAN and QoS configuration before a planned change on an Alcatel Birds Of Prey switch.
What Can Be Monitored
- configuration file/snapshot status
This MIB depends on
Related MIBs
Imported Objects
From ALCATEL-IND1-BASE
| softentIND1Confmgr | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| alcatelIND1ConfigMgrMIB | 1.3.6.1.4.1.6486.801.1.2.1.11.1 | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Configuration Manager Subsystem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE | ||
| alcatelIND1ConfigMgrMIBCompliance | 1.3.6.1.4.1.6486.801.1.2.1.11.1.2.2.1 | Compliance statement for Configuration Manager Subsystem. | ||
| alcatelIND1ConfigMgrMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.11.1.2.2 | Branch For Configuration Manager Subsystem Compliance Statements. | ||
| alcatelIND1ConfigMgrMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.11.1.2 | Branch For Configuration Manager Subsystem Conformance Information. | ||
| alcatelIND1ConfigMgrMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1 | Branch For Configuration Manager Subsystem Units Of Conformance. | ||
| alcatelIND1ConfigMgrMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1 | Branch For Configuration Manager Subsystem Managed Objects. | ||
| INT configChangeStatus | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.45 | INTEGER | read-only | The current state of the running configuration with respect to the saved configuration. |
| INT configErrorFileMaximum | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.44 | INTEGER | read-write | The maximum number of error files which may be present on a switch. Each time a new error file is created, all but the newest configErrorFileMaxNum error files are deleted. |
| STR configErrorFileName | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.3 | DisplayString | read-only | The name of the file containing the error messages generated by the device during file configuration. |
| INT configFileAction | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.2 | INTEGER | read-write | Triggers application of the configuration file specified by the configInputFileName. A value of checkSyntax causes configInputFile to be checked for syntax, with no changes to device configuration. A value of checkSyntaxAndApply causes the configInputFile to be applied to the device configuration.A value of none indicates no action has been triggered. |
| configFileGroup | 1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.1 | Collection of objects for file configuration. | ||
| INT configFileMode | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.5 | INTEGER | read-write | The verbose mode displays all configuration commands and errors when the file is applied on the console screen. Ignored unless set from command line interface. |
| STR configFileName | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.1 | DisplayString | read-write | The name of the configuration file to be read by the device. The file specified should be present on the device. |
| INT configFileStatus | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.4 | INTEGER | read-only | Status of most recent application of configuration file to the device. |
| configManager | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1 | |||
| INT configSnapshot8021QSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.21 | INTEGER | read-write | A set of this object causes 802.1Q configuration data to be included in the snap-shot file generated by the the device. |
| INT configSnapshotAAASelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.19 | INTEGER | read-write | A set of this object causes AAA configuration data to be included in the snap-shot file generated by the the device. |
| INT configSnapshotAction | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.11 | INTEGER | read-write | A set of this object causes the configuration snap-shot to be generated by the device. |
| INT configSnapshotAllSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.12 | INTEGER | read-write | A set of this object causes all application configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotAtmSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.49 | INTEGER | read-write | A set of this object causes ATM configuration data to be included in the snap-shot file generated by the device. NOT SUPPORTED. |
| INT configSnapshotBFDSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.61 | INTEGER | read-write | A set of this object causes BFD configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotBGPSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.38 | INTEGER | read-write | A set of this object causes BGP configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotBootPSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.26 | INTEGER | read-write | A set of this object causes bootp configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotBridgeSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.27 | INTEGER | read-write | A set of this object causes source-learning configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotChassisSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.28 | INTEGER | read-write | A set of this object causes the chassis configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotDhcpSrvSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.67 | INTEGER | read-write | A set of this object causes DHCP Server configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotDHLSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.70 | INTEGER | read-write | A set of this object causes DHL configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotEFMOAMSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.64 | INTEGER | read-write | A set of this object causes EFMOAM configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotEOAMSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.57 | INTEGER | read-write | A set of this object causes Ethernet OAM configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotErpSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.62 | INTEGER | read-write | A set of this object causes ERP configuration data to be included in the snap-shot file generated by the device. |
| STR configSnapshotFileName | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.10 | DisplayString | read-write | The name of the configuration snap-shot file to be generated by the device. |
| configSnapshotGroup | 1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.3 | Collection of objects for snapshot configuration. | ||
| INT configSnapshotHealthMonitorSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.25 | INTEGER | read-write | A set of this object causes health monitoring configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotInterfaceSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.29 | INTEGER | read-write | A set of this object causes ethernet interface configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotIPMRSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.40 | INTEGER | read-write | A set of this object causes IP multicast routing configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotIPMSSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.18 | INTEGER | read-write | A set of this object causes IPMS configuration data to be included in the snap-shot file generated by the the device. |
| INT configSnapshotIPRMSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.39 | INTEGER | read-write | A set of this object causes IPRM routing configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotIPsecSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.60 | INTEGER | read-write | A set of this object causes IP Security configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotIPSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.16 | INTEGER | read-write | A set of this object causes IP configuration data to be included in the snap-shot file generated by the the device. |
| INT configSnapshotIPv6Select | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.47 | INTEGER | read-write | A set of this object causes IPv6 configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotIPXSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.17 | INTEGER | read-write | A set of this object causes IPX configuration data to be included in the snap-shot file generated by the the device. |
| INT configSnapshotISISSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.56 | INTEGER | read-write | A set of this object causes ISIS configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotLBDSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.65 | INTEGER | read-write | A set of this object causes Loop Back Detection configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotLFPSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.69 | INTEGER | read-write | A set of this object causes LFP configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotLinkAggregateSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.22 | INTEGER | read-write | A set of this object causes link aggregation configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotLLDPSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.68 | INTEGER | read-write | A set of this object causes LLDP configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotModuleSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.41 | INTEGER | read-write | A set of this object causes module configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotMPLSSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.63 | INTEGER | read-write | A set of this object causes MPLS configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotNETSECSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.59 | INTEGER | read-write | A set of this object causes NETSEC configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotNTPSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.51 | INTEGER | read-write | A set of this object causes NTP configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotOSPF3Select | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.53 | INTEGER | read-write | A set of this object causes OSPF3 configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotOSPFSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.37 | INTEGER | read-write | A set of this object causes OSPF configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotPolicySelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.30 | INTEGER | read-write | A set of this object causes policy manager configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotPortMappingSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.52 | INTEGER | read-write | A set of this object causes Port Mapping configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotPortMirrorSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.23 | INTEGER | read-write | A set of this object causes port mirroring configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotQOSSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.15 | INTEGER | read-write | A set of this object causes QOS configuration data to be included in the snap-shot file generated by the the device. |
| INT configSnapshotRDPSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.46 | INTEGER | read-write | A set of this object causes RDP configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotRIPngSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.48 | INTEGER | read-write | A set of this object causes RIPng configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotRIPSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.36 | INTEGER | read-write | A set of this object causes RIP configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotSAASelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.66 | INTEGER | read-write | A set of this object causes SAA configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotServerLoadBalanceSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.32 | INTEGER | read-write | A set of this object causes server load balancing configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotSessionSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.31 | INTEGER | read-write | A set of this object causes the user-session configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotSNMPSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.20 | INTEGER | read-write | A set of this object causes SNMP configuration data to be included in the snap-shot file generated by the the device. |
| INT configSnapshotSonetSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.50 | INTEGER | read-write | A set of this object causes Sonet configuration data to be included in the snap-shot file generated by the device. NOT SUPPORTED. |
| INT configSnapshotSpanningTreeSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.14 | INTEGER | read-write | A set of this object causes Spanning Tree configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotStackSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.55 | INTEGER | read-write | A set of this object causes STack Manager configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotSystemServiceSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.33 | INTEGER | read-write | A set of this object causes system services configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotUDLDSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.58 | INTEGER | read-write | A set of this object causes UDLD configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotVlanSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.13 | INTEGER | read-write | A set of this object causes Vlan configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotVRRPSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.34 | INTEGER | read-write | A set of this object causes VRRP configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotWccpSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.71 | INTEGER | read-write | A set of this object causes WCCP configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotWebSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.35 | INTEGER | read-write | A set of this object causes web manager configuration data to be included in the snap-shot file generated by the device. |
| INT configSnapshotXIPSelect | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.24 | INTEGER | read-write | A set of this object causes proprietary inter-switch protocol configuration data to be included in the snap-shot file generated by the device. |
| INT configTechSupportLogAction | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.42 | INTEGER | read-write | A set of this object causes a tech_support.log file to be created containing switch information useful to a technical support group. |
| configTechSupportLogGroup | 1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.4 | Collection of objects for technical support log file. | ||
| INT configTimerClear | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.9 | INTEGER | read-write | A set of this object causes the ASCII configuration timer to be cleared. |
| configTimerFileGroup | 1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.2 | Collection of objects for timer file configuration. | ||
| STR configTimerFileName | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.6 | DisplayString | read-write | The name of the configuration file to be read later by the device. |
| INT configTimerFileStatus | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.8 | INTEGER | read-only | The current status of the ASCII configuration timer. |
| STR configTimerFileTime | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.7 | DisplayString | read-write | The local time when the configuration file will be read by the device. This object is only set if the configInputFile must be applied at a later time. The following formats are valid: MM/DD/YYYY hh:mm MM/DD/YY hh:mm MM/DD hh:mm - uses current year if after current date and time, next year otherwise. hh:mm - uses today's date if later than current time, tommorow's date otherwise. where YY - year (0-38,99) MM - month (1-12) DD - day (1-31) hh - hour (0-23) mm - minute (0-59) |
| INT configWriteMemory | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.43 | INTEGER | read-write | A set of this object causes the entire switch snap-shot configuration to be stored in the boot.cfg file in the working directory. |
| configWriteMemoryGroup | 1.3.6.1.4.1.6486.801.1.2.1.11.1.2.1.5 | Collection of objects for write memory. | ||
| INT configWriteMemoryStatus | 1.3.6.1.4.1.6486.801.1.2.1.11.1.1.1.54 | INTEGER | read-only | Status of most recent wwrite memory action. |
RFC description
Alcatel Birds of Prey configuration manager for device setup and management operations.
Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.