ALCATEL-IND1-IPMRM-MIB

All MIBs › ALCATEL-IND1-IPMRM-MIB

Organization: Alcatel-Lucent

Last Updated: 2012-04-03

Category: Routing Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch IP multicast route manager MIB for controlling multicast routing module parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-IPMRM-MIB?

ALCATEL-IND1-IPMRM-MIB is a proprietary Alcatel enterprise MIB for the OmniSwitch product line managing the IP Multicast Route Manager (IPMRM), the module responsible for global multicast-routing configuration and multicast-router membership/status on the switch. It falls into the multicast-routing configuration/status category, exposing global configuration parameters, multicast-router membership status, and the protocol applications registered with IPMRM. Its monitoring value centers on software/service status for multicast routing — confirming the multicast route manager is correctly configured (alaIpmrmGlobalConfig) and that expected multicast routing protocol applications are registered and healthy (alaIpmrmMbrStatus, alaIpmrmMbrProtocolApps) — rather than physical hardware metrics. It is a vendor-specific module built on Alcatel's own OmniSwitch enterprise MIB tree, conceptually complementing standard IETF multicast-routing MIBs without formally depending on them. It is typically deployed on Alcatel OmniSwitch equipment in networks running IP multicast applications (such as video distribution) where multicast-routing health needs monitoring. Engineers can download the ALCATEL-IND1-IPMRM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-IPMRM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel OmniSwitch

Monitoring Examples

An operator would poll alaIpmrmGlobalConfig to verify global multicast-routing parameters are set correctly, and check alaIpmrmMbrStatus alongside alaIpmrmMbrProtocolApps to confirm the expected multicast routing protocols are registered and reporting a healthy member status. An unexpected alaIpmrmMbrStatus value would reveal that a multicast routing protocol has failed to register or has dropped out, which would explain a loss of multicast stream delivery on the switch.

What Can Be Monitored

multicast route manager global configuration
multicast router member status
registered multicast protocol applications

Imported Objects

From ALCATEL-IND1-BASE

routingIND1Ipmrm

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1IPMRMMIB	1.3.6.1.4.1.6486.801.1.2.1.10.10.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of IPMRM (IP Multicast Route Manager) global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1IPMRMMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.10.10.1.1
alaIpmrmGlobalConfig	1.3.6.1.4.1.6486.801.1.2.1.10.10.1.1.1
INT alaIpmrmMbrStatus	1.3.6.1.4.1.6486.801.1.2.1.10.10.1.1.1.1	INTEGER	read-write	Administratively enables/disables the Multicast Border Router (MBR) functionality on this router.
BIT alaIpmrmMbrProtocolApps	1.3.6.1.4.1.6486.801.1.2.1.10.10.1.1.1.2	Bits	read-only	Bit map object to reflect the multicast protocols that are currently registered with IPMRM. Bits 0 - 1 are currently in use, and if set, indicate that the respective application is currently active: bit 0 - DVMRP bit 1 - PIM
alcatelIND1IPMRMMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.10.10.1.2
alcatelIND1IPMRMMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.10.10.1.2.1
alaIpmrmCompliance	1.3.6.1.4.1.6486.801.1.2.1.10.10.1.2.1.1			The compliance statement for routers running IP Multicast and implementing the ALCATEL-IND1-IPMRM MIB.
alcatelIND1IPMRMMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.10.10.1.2.2
alaIpmrmConfigMIBGroup	1.3.6.1.4.1.6486.801.1.2.1.10.10.1.2.2.1			A collection of objects to support management of global configuration parameters for IP Multicast Routing

RFC description

Alcatel-Lucent IND1 vendor-private MIB for managing IP multicast routing and membership operations.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-IPMRM-MIB

What Is ALCATEL-IND1-IPMRM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description