All MIBs › AIX1-MIB
Category: Net-SNMP and Linux
Description: IBM AIX SNMP extension MIB providing host resource and operating system statistics for AIX systems.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is AIX1-MIB?
This MIB module is IBM's extension MIB for AIX systems, exposing host resource and operating-system-level statistics beyond what standard host/interface MIBs provide. Based on its structure it covers system-level and application/packet-level statistics for AIX hosts, including flow-control and buffer-related thresholds affecting network I/O. This MIB supports software/OS health monitoring: administrators can track buffer/flow-control threshold state (such as the global XOFF flow-control threshold) to detect network buffer exhaustion or throttling conditions on the AIX host, alongside broader system and application statistics. It is IBM's proprietary AIX enterprise MIB extension and is typically used alongside standard IETF Host Resources MIB and IF-MIB objects for a complete picture of an AIX server. It is typically deployed on IBM AIX Unix servers in enterprise data centers for OS-level performance and resource monitoring. Engineers can download the AIX1-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in AIX1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Applied Innovation Inc. AI Series 1 X.25 Smart Line Cards (WAN protocol-converter equipment; company acquired by Kentrox/KEG Holdings in 2007)
Monitoring Examples
An admin would check the aiX1System and aiX1Pkt branch objects alongside the global buffer-recovery/flow-control threshold referenced in the module description to see whether the AIX host's XOFF flow-control mechanism has been triggered. A non-zero threshold combined with degraded network throughput on the host would indicate the AIX kernel is throttling traffic due to buffer exhaustion.
What Can Be Monitored
- global buffer/flow-control threshold state
- system-level statistics
- application/packet-level statistics
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| enterprises |
From SNMPv2-TC
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ai192 | 1.3.6.1.4.1.539.2.192 | |||
| ai192Ver7 | 1.3.6.1.4.1.539.2.192.7 | |||
| ai192Ver70 | 1.3.6.1.4.1.539.2.192.7.0 | |||
| ai192Ver708 | 1.3.6.1.4.1.539.2.192.7.0.8 | |||
| ai192Ver709 | 1.3.6.1.4.1.539.2.192.7.0.9 | |||
| ai192Ver71 | 1.3.6.1.4.1.539.2.192.7.1 | |||
| ai192Ver710 | 1.3.6.1.4.1.539.2.192.7.1.0 | |||
| ai192Ver711 | 1.3.6.1.4.1.539.2.192.7.1.1 | |||
| ai192Ver72 | 1.3.6.1.4.1.539.2.192.7.2 | |||
| ai192Ver720 | 1.3.6.1.4.1.539.2.192.7.2.0 | |||
| ai192Ver721 | 1.3.6.1.4.1.539.2.192.7.2.1 | |||
| ai192Ver77 | 1.3.6.1.4.1.539.2.192.7.7 | |||
| ai196 | 1.3.6.1.4.1.539.2.196 | |||
| ai196Ver7 | 1.3.6.1.4.1.539.2.196.7 | |||
| ai196Ver70 | 1.3.6.1.4.1.539.2.196.7.0 | |||
| ai196Ver708 | 1.3.6.1.4.1.539.2.196.7.0.8 | |||
| ai196Ver709 | 1.3.6.1.4.1.539.2.196.7.0.9 | |||
| ai196Ver71 | 1.3.6.1.4.1.539.2.196.7.1 | |||
| ai196Ver710 | 1.3.6.1.4.1.539.2.196.7.1.0 | |||
| ai196Ver711 | 1.3.6.1.4.1.539.2.196.7.1.1 | |||
| ai196Ver72 | 1.3.6.1.4.1.539.2.196.7.2 | |||
| ai196Ver720 | 1.3.6.1.4.1.539.2.196.7.2.0 | |||
| ai196Ver721 | 1.3.6.1.4.1.539.2.196.7.2.1 | |||
| ai196Ver77 | 1.3.6.1.4.1.539.2.196.7.7 | |||
| aii | 1.3.6.1.4.1.539 | |||
| aiSystemOID | 1.3.6.1.4.1.539.2 | |||
| aiX1 | 1.3.6.1.4.1.539.12 | |||
| INT aix1AdminGbufRecovThreshold | 1.3.6.1.4.1.539.12.1.2 | INTEGER | read-write | The configured recovery global flow control threshold. If zero and if aix1AdminGbufXoffThreshold is zero, the global flow control mechanism is disabled. |
| INT aix1AdminGbufXoffThreshold | 1.3.6.1.4.1.539.12.1.1 | INTEGER | read-write | The configured XOFF global flow control threshold. If zero and if aix1AdminGbufRecovThreshold is zero, the global flow control mechanism is disabled. |
| INT aix1AdminPVCChannelNumber | 1.3.6.1.4.1.539.12.6.3.1.2 | INTEGER | read-only | X.25 logical channel number. |
| aix1AdminPVCEntry | 1.3.6.1.4.1.539.12.6.3.1 | not-accessible | The addressing information for the PVC Admin table. | |
| IFI aix1AdminPVCLinkId | 1.3.6.1.4.1.539.12.6.3.1.1 | IfIndexType | read-only | The ifindex value of the packet layer entity. |
| aix1AdminPVCTable | 1.3.6.1.4.1.539.12.6.3 | not-accessible | The table of objects which control attributes of PVCs configured, but not necessarily in effect. | |
| INT aix1AdminPVCTimer | 1.3.6.1.4.1.539.12.6.3.1.4 | INTEGER | read-write | Defines the timer interval, in seconds used to manage the PVC's relationship with an internal backplane connection. The timer is used for different purposes depending on the value of aix1VCPVCType as described above. This object will return the value 0 if aix1AdminPVCChannelNumber doesn't correspond to a channel in the range specified by the combination of x25admnNumberPVCs and aix1PktAdminPVCOffset for the link specified by aix1AdminPVCLinkID. This object is settable, but does not reflect the mandatory operational value of this parameter. |
| INT aix1AdminPVCType | 1.3.6.1.4.1.539.12.6.3.1.3 | INTEGER | read-write | Defines the relationship between a PVC and the connection-oriented AISwitch TDM backplane. The three types represent are defined as follows: Active: initiates connections across the backplane at an interval defined by the timer. Passive: waits to respond to a connection attempt across the backplane. Uses timer to wait for reset confirm from network. Accepts the backplane connection if it receives reset confirmation in time. Connect on Activity: initiates connection across backplane upon receipt of data from network. Forwards received data once connection is established. Disconnects backplane connection if a timer interval passes with no data activity in either direction. This object will return the value none(1) if aix1AdminPVCChannelNumber doesn't correspond to a channel in the range specified by the combination of x25admnNumberPVCs and aix1PktAdminPVCOffset for the link specified by aix1AdminPVCLinkID. This object is settable, but does not reflect the mandatory operational value of this parameter. |
| INT aix1AdminRollover | 1.3.6.1.4.1.539.12.1.3 | INTEGER | read-only | This object has been depricated and remains in the MIB for backward compatibility. |
| aiX1Appl | 1.3.6.1.4.1.539.12.2 | |||
| aix1ApplAdminEntry | 1.3.6.1.4.1.539.12.2.1.1 | not-accessible | The addressing information for one of this X.25 link's administrative objects. | |
| IFI aix1ApplAdminIndex | 1.3.6.1.4.1.539.12.2.1.1.1 | IfIndexType | read-only | The ifIndex value of the packet layer entity associated with these application level objects. |
| INT aix1ApplAdminLinkConnectionMode | 1.3.6.1.4.1.539.12.2.1.1.10 | INTEGER | read-write | Connect or disconnect a link that's enabled by the standard MIB linmk status objects. If the link is not enabled by the standard MIB objects, a write to this object will have no effect. Disconnecting a link by writing to this object does not free any resources, it marks the link as not connected, so that the link will not cause a level 4 (LINKDOWN) alarm to be generated. |
| STR aix1ApplAdminLinkDescription | 1.3.6.1.4.1.539.12.2.1.1.9 | DisplayString | read-write | A descriptive string associated with this link. This provides a place for the agent to supply any descriptive information about the use or owner of the link. A zero length value indicates that the agent doesn't have any additional information. |
| INT aix1ApplAdminLinkMode | 1.3.6.1.4.1.539.12.2.1.1.3 | INTEGER | read-write | Determines whether link behaves as a normal X.25 link or a BX.25-style passive link. This is the most recently configured value of this attribute, and may not yet have taken effect. The current operating value is available as aix1ApplOperLinkMode. |
| INT aix1ApplAdminLinkStart | 1.3.6.1.4.1.539.12.2.1.1.2 | INTEGER | read-write | Start or stop a link that's enabled by the standard MIB link status objects. If the link is not enabled by the standard MIB objects, a write to this object will have no effect. Stopping a link by writing to this object does not free significant resources, it just stops activity on the link. |
| INT aix1ApplAdminNMAProto | 1.3.6.1.4.1.539.12.2.1.1.6 | INTEGER | read-write | Determines whether NMA protocol processing is in effect by default on all virtual circuits on the link. |
| INT aix1ApplAdminOPSINEProto | 1.3.6.1.4.1.539.12.2.1.1.7 | INTEGER | read-write | Determines whether OPSINE protocol processing is in effect by default on all virtual circuits on the link. |
| INT aix1ApplAdminResetErrs | 1.3.6.1.4.1.539.12.2.1.1.4 | INTEGER | read-write | Writing the value resetCounters(2) to this object resets the per-link level 1 error counters. No other writes are accepted. They are aix1PhysStatRxCRCErrors, aix1PhysStatRxAborts, aix1PhysStatRxOverruns, aix1PhysStatTxAborts, aix1PhysStatTxUnderruns. |
| aix1ApplAdminTable | 1.3.6.1.4.1.539.12.2.1 | not-accessible | The table of administrative elements which apply to an individual X.25 link above the packet layer. | |
| INT aix1ApplAdminTL1Proto | 1.3.6.1.4.1.539.12.2.1.1.8 | INTEGER | read-write | Determines whether TL1 protocol processing is in effect by default on all virtual circuits on the link. |
| INT aix1ApplAdminXONXOFFProto | 1.3.6.1.4.1.539.12.2.1.1.5 | INTEGER | read-write | Determines whether XON/XOFF protocol processing is in effect by default on all virtual circuits on the link. |
| aix1ApplOperEntry | 1.3.6.1.4.1.539.12.2.2.1 | not-accessible | The addressing information for one of this X.25 link's operational objects. | |
| IFI aix1ApplOperIndex | 1.3.6.1.4.1.539.12.2.2.1.1 | IfIndexType | read-only | The ifIndex value of the packet level associated with these application level objects. |
| INT aix1ApplOperLinkConnectionMode | 1.3.6.1.4.1.539.12.2.2.1.9 | INTEGER | read-only | Determines whether the link is currently disconnected, connected or has been reconnected after it was disconnected. |
| STR aix1ApplOperLinkDescription | 1.3.6.1.4.1.539.12.2.2.1.8 | DisplayString | read-only | A descriptive string associated with this link. This provides a place for the agent to supply any descriptive information about the use or owner of the link. A zero length value indicates that the agent doesn't have any additional information. |
| INT aix1ApplOperLinkMode | 1.3.6.1.4.1.539.12.2.2.1.2 | INTEGER | read-only | Determines whether link behaves as a normal X.25 link or a BX.25-style passive link. This is the mandatory operating value of this attribute. The most recently configured value is available as aix1ApplAdminLinkMode. |
| INT aix1ApplOperNMAProto | 1.3.6.1.4.1.539.12.2.2.1.4 | INTEGER | read-only | Determines whether NMA protocol processing is in effect by default on all virtual circuits on the link. |
| INT aix1ApplOperOPSINEProto | 1.3.6.1.4.1.539.12.2.2.1.6 | INTEGER | read-only | Determines whether OPSINE protocol processing is in effect by default on all virtual circuits on the link. |
| aix1ApplOperTable | 1.3.6.1.4.1.539.12.2.2 | not-accessible | The table of operational elements which apply to an individual X.25 link above the packet layer. | |
| INT aix1ApplOperTL1Proto | 1.3.6.1.4.1.539.12.2.2.1.7 | INTEGER | read-only | Determines whether TL1 protocol processing is in effect by default on all virtual circuits on the link. |
| INT aix1ApplOperXONXOFFProto | 1.3.6.1.4.1.539.12.2.2.1.3 | INTEGER | read-only | Determines whether XON/XOFF protocol processing is in effect by default on all virtual circuits on the link. |
| INT aix1Bx25AdminCallDown | 1.3.6.1.4.1.539.12.1.4 | INTEGER | read-write | If set to off(2), an active BX.25 link will stay up after all calls are disconnected. If set to on(1), an active BX.25 link will drop and go into DMLOCK (see aix1Bx25AdminDMlock below) when all the link's backplane connections are terminated. This object is meaningful only when aix1ApplOperLinkMode is set to passive(2) on a given packet layer entity. |
| INT aix1Bx25AdminDMlock | 1.3.6.1.4.1.539.12.1.5 | INTEGER | read-write | The number of seconds to wait after a BX.25 passive link has gone inactive before allowing an outgoing call to attempt to bring up the link. Any outgoing call attempts will be rejected until the DMLOCK timer expires and the passive link returns to the standby mode. This object is meaningful only when aix1ApplOperLinkMode is set to passive(2) on a given packet layer entity. |
| INT aix1Bx25AdminLinkUp | 1.3.6.1.4.1.539.12.1.6 | INTEGER | read-write | The number of seconds to wait for a passive link to become active. This object is meaningful only when aix1ApplOperLinkMode is set to passive(2) on a given packet layer entity. |
| INT aix1CircuitBCNumber | 1.3.6.1.4.1.539.12.6.1.1.5 | INTEGER | read-only | The number of the Bus Connection with which this VC is associated. |
| INT aix1CircuitChannelNumber | 1.3.6.1.4.1.539.12.6.1.1.2 | INTEGER | read-only | X.25 logical channel number. |
| INT aix1CircuitConType | 1.3.6.1.4.1.539.12.6.1.1.4 | INTEGER | read-only | The type of connection currently supported by the VC. |
| aix1CircuitEntry | 1.3.6.1.4.1.539.12.6.1.1 | not-accessible | The addressing information for the VC Circuit table. | |
| IFI aix1CircuitLinkId | 1.3.6.1.4.1.539.12.6.1.1.1 | IfIndexType | read-only | The ifindex value of the packet layer entity. |
| INT aix1CircuitOperPVCTimer | 1.3.6.1.4.1.539.12.6.1.1.12 | INTEGER | read-write | Defines the timer interval, in seconds used to manage the PVC's relationship with an internal backplane connection. The timer is used for different purposes depending on the value of aix1VCPVCType as described above. This object will return the value 0 if the VC in question is not associated with a PVC. This object reflects the current operational value of this parameter. Note that unlike most operational objects, it is writable. If the value of this object is changed, it modifies the current behavior of the board, but is not saved in nonvolatile memory. |
| INT aix1CircuitOperPVCType | 1.3.6.1.4.1.539.12.6.1.1.11 | INTEGER | read-write | Defines the relationship between a PVC and the connection-oriented AISwitch TDM backplane. The three types represented are defined as follows: Active: initiates connections across the backplane at an interval defined by the timer. Passive: waits to respond to a connection attempt across the backplane. Uses timer to wait for reset confirm from network. Accepts backplane connection if it receives reset confirmation in time. Connect on Activity: initiates connection across backplane upon the receipt of data from the network. Forwards received data once connection is established. Disconnects backplane connection if a timer interval passes with no data activity in either direction. This object will return the value none(1) if the value of aix1CircuitConType for this VC is not pvc(11). This object reflects the current operational value of this parameter. Note that unlike most operational objects, it is writable. If the value of this object is changed, it modifies the current behavior of the board, but is not saved in nonvolatile memory. |
| C32 aix1CircuitPktsRcvd | 1.3.6.1.4.1.539.12.6.1.1.10 | Counter32 | read-only | The number of packets received from the packet level by the AI version 7 system software. This counts all kinds of packets, not just data packets. |
| C32 aix1CircuitPktsSent | 1.3.6.1.4.1.539.12.6.1.1.9 | Counter32 | read-only | The number of packets sent to the packet level by the AI version 7 system software. This counts all kinds of packets, not just data packets. |
| INT aix1CircuitRemoteBasePort | 1.3.6.1.4.1.539.12.6.1.1.7 | INTEGER | read-only | The baseport of the card to which the SLC is connected across the backplane. This value is meaningful only when this VC is multiplexed to the other SLC. If not, the value returned is -1. |
| INT aix1CircuitRemoteVCNumber | 1.3.6.1.4.1.539.12.6.1.1.8 | INTEGER | read-only | The Virtual Connection number of the VC on the remote SLC to which this VC is connected. This value is meaningful only on multiplexed VCs. |
| INT aix1CircuitState | 1.3.6.1.4.1.539.12.6.1.1.3 | INTEGER | read-only | The call processing state of the local Virtual Connection. This is not a standard packet level state. This is the call processing state of the AI version 7 system firmware that mediates between the X.25 protocol stack and AISwitch internal connection mechanisms. |
| aix1CircuitTable | 1.3.6.1.4.1.539.12.6.1 | not-accessible | The table of objects which maps logical channel number and packet level ifIndex number to Virtual Connection(VC) number. | |
| STR aix1CircuitUserData | 1.3.6.1.4.1.539.12.6.1.1.6 | DisplayString | read-only | The user data that was sent or received in the call request. |
| aiX1Frm | 1.3.6.1.4.1.539.12.4 | |||
| aix1FrmAdminEntry | 1.3.6.1.4.1.539.12.4.1.1 | not-accessible | The addressing information for one of this X.25 link's frame layer administrative objects. | |
| INT aix1FrmAdminIdleRRs | 1.3.6.1.4.1.539.12.4.1.1.2 | INTEGER | read-write | Enables and disables transmission of idle Receive Ready frames by the frame layer. |
| IFI aix1FrmAdminIndex | 1.3.6.1.4.1.539.12.4.1.1.1 | IfIndexType | read-only | The ifIndex value of the frame layer entity associated with these objects. |
| INT aix1FrmAdminRandomizeT1 | 1.3.6.1.4.1.539.12.4.1.1.3 | INTEGER | read-write | Enables and disables the introduction of random jitter into the frame layer's T1 timer to avoid T1 timer synchronization with the remote frame layer. |
| aix1FrmAdminTable | 1.3.6.1.4.1.539.12.4.1 | not-accessible | The table of administrative elements which apply to an individual X.25 link at the frame layer. | |
| aix1FrmOperEntry | 1.3.6.1.4.1.539.12.4.2.1 | not-accessible | The addressing information for one of this X.25 link's frame layer operational objects. | |
| INT aix1FrmOperIdleRRs | 1.3.6.1.4.1.539.12.4.2.1.2 | INTEGER | read-only | Enables and disables transmission of idle Receive Ready frames by the frame layer. |
| IFI aix1FrmOperIndex | 1.3.6.1.4.1.539.12.4.2.1.1 | IfIndexType | read-only | The ifIndex value of the frame level associated with these objects. |
| INT aix1FrmOperRandomizeT1 | 1.3.6.1.4.1.539.12.4.2.1.3 | INTEGER | read-only | Enables and disables the introduction of random jitter into the frame layer's T1 timer to avoid T1 timer synchronization with the remote frame layer. |
| aix1FrmOperTable | 1.3.6.1.4.1.539.12.4.2 | not-accessible | The table of operational elements which apply to an individual X.25 link at the frame layer. | |
| aiX1Phys | 1.3.6.1.4.1.539.12.5 | |||
| aix1PhysAdminEntry | 1.3.6.1.4.1.539.12.5.1.1 | not-accessible | The addressing information for one of this X.25 link's physical layer administrative objects. | |
| IFI aix1PhysAdminIndex | 1.3.6.1.4.1.539.12.5.1.1.1 | IfIndexType | read-only | The ifIndex value of the physical port associated with these objects. |
| INT aix1PhysAdminInterFrameDelayInterval | 1.3.6.1.4.1.539.12.5.1.1.3 | INTEGER | read-write | Sets the interframe delay interval. This value is effective only if aix1PhysAdminInterFrameDelayStatus is set to ifdEnabled(2). This value is expressed in microseconds, with 100 microsecond granularity (it's truncated to the nearest 100 microseconds). |
| INT aix1PhysAdminInterFrameDelayStatus | 1.3.6.1.4.1.539.12.5.1.1.2 | INTEGER | read-write | Enables and disables a delay period between transmitted frames. |
| INT aix1PhysAdminT1LineBuildOut | 1.3.6.1.4.1.539.12.5.1.1.4 | INTEGER | read-write | The T1 line build out value. The specified syntax represents ranges of line length expressed in feet. |
| aix1PhysAdminTable | 1.3.6.1.4.1.539.12.5.1 | not-accessible | The table of administrative elements which apply to an individual X.25 link at the physical layer. | |
| aix1PhysOperEntry | 1.3.6.1.4.1.539.12.5.2.1 | not-accessible | The addressing information for one of this X.25 link's physical layer operational objects. | |
| IFI aix1PhysOperIndex | 1.3.6.1.4.1.539.12.5.2.1.1 | IfIndexType | read-only | The ifIndex value of the physical port associated with these objects. |
| INT aix1PhysOperInterFrameDelayInterval | 1.3.6.1.4.1.539.12.5.2.1.3 | INTEGER | read-only | Sets the interframe delay interval. This value is effective only if aix1PhysAdminInterFrameDelayStatus is set to ifdEnabled(2). This value is expressed in microseconds, with 100 microsecond granularity (it's truncated to the nearest 100 microseconds). |
| INT aix1PhysOperInterFrameDelayStatus | 1.3.6.1.4.1.539.12.5.2.1.2 | INTEGER | read-only | Enables and disables a delay period between transmitted frames. |
| INT aix1PhysOperT1LineBuildOut | 1.3.6.1.4.1.539.12.5.2.1.4 | INTEGER | read-only | The T1 line build out value. The specified syntax represents ranges of line length expressed in feet. |
| aix1PhysOperTable | 1.3.6.1.4.1.539.12.5.2 | not-accessible | The table of operational elements which apply to an individual X.25 link at the physical layer. | |
| aix1PhysStatEntry | 1.3.6.1.4.1.539.12.5.3.1 | not-accessible | The addressing information for one of this X.25 link's physical layer statistical objects. | |
| IFI aix1PhysStatIndex | 1.3.6.1.4.1.539.12.5.3.1.1 | IfIndexType | read-only | The ifIndex value of the physical port associated with these objects. |
| aix1PhysStatTable | 1.3.6.1.4.1.539.12.5.3 | not-accessible | The table of statistical elements which apply to an individual X.25 link at the physical layer. | |
| C32 aix1PhysStatTxAborts | 1.3.6.1.4.1.539.12.5.3.1.2 | Counter32 | read-only | The number of abort sequences transmitted on the serial interfaces. This is a proprietary object because the RS232-like MIB (RFC 1659) doesn't define a similar object! RFC 1659 defines a counter for receive aborts, but not transmit aborts. |
| aiX1Pkt | 1.3.6.1.4.1.539.12.3 | |||
| INT aix1PktAdminConformanceMode | 1.3.6.1.4.1.539.12.3.1.1.2 | INTEGER | read-write | The configured conformance testing mode to which X.25's behavior will adhere. This value may not have taken effect. The value with which the SLC is currently operating is the value of aix1OperConformanceMode. |
| INT aix1PktAdminDBit | 1.3.6.1.4.1.539.12.3.1.1.3 | INTEGER | read-write | Determines whether the packet level will allow the D-bit in call setup packets. |
| INT aix1PktAdminDefMaxPktSize | 1.3.6.1.4.1.539.12.3.1.1.10 | INTEGER | read-write | The maximum packet size to use for all calls placed on this packet layer entity. If aix1PktAdminNegPktSize is set to negotiate(2), this will be the proposed value for calls placed on the packet level entitry. |
| INT aix1PktAdminDefWindowSize | 1.3.6.1.4.1.539.12.3.1.1.11 | INTEGER | read-write | The maximum packet level window size to use on this PLE. If aix1PktAdminNegWindowSize is set to negotiate(2), this will be the proposed value for calls placed on the packet layer entity. |
| aix1PktAdminEntry | 1.3.6.1.4.1.539.12.3.1.1 | not-accessible | The addressing information for one of this X.25 link's packet layer administrative objects. | |
| INT aix1PktAdminFacilChecking | 1.3.6.1.4.1.539.12.3.1.1.8 | INTEGER | read-write | Enables and disables packet level checking of the facilities field of call processing packets for validity. |
| IFI aix1PktAdminIndex | 1.3.6.1.4.1.539.12.3.1.1.1 | IfIndexType | read-only | The ifIndex value of the packet layer entity associated with these objects. |
| INT aix1PktAdminNegMaxPktSize | 1.3.6.1.4.1.539.12.3.1.1.12 | INTEGER | read-write | Determines whether this PLE will originate calls which negotiate packet size. |
| INT aix1PktAdminNegWindowSize | 1.3.6.1.4.1.539.12.3.1.1.13 | INTEGER | read-write | Determines whether this PLE will originate calls which negotiate window size. |
| INT aix1PktAdminPacketizingTimer | 1.3.6.1.4.1.539.12.3.1.1.14 | INTEGER | read-write | The interval from the time of receipt of the first character from the TDM backplane to transmission of a block of characters to the X.25 protocol stack for transmission in a data packet to the network. In 100ths of a second. This value is not meaningful on backplane connections on which escape framing, TL1 packetizing, or programmable forwarding characters are active. |
| INT aix1PktAdminPVCOffset | 1.3.6.1.4.1.539.12.3.1.1.15 | INTEGER | read-write | Specifies an offset that gets added to the PVC logical channel range specified by x25AdmnMaxActiveCircuits and x25AdmnNumberPVCs from RFC 1382. |
| INT aix1PktAdminQBitMBit | 1.3.6.1.4.1.539.12.3.1.1.4 | INTEGER | read-write | Determines whether the packet level will check for consistency in the use of Q and M bits, i. e. that the value of the Q-bit is the same in every packet of an M-bit sequence. |
| INT aix1PktAdminSendInitialRestart | 1.3.6.1.4.1.539.12.3.1.1.6 | INTEGER | read-write | Enables and disables sending of an initial restart request packet when the link comes up. |
| INT aix1PktAdminStdsBody | 1.3.6.1.4.1.539.12.3.1.1.7 | INTEGER | read-write | Selects between ISO and CCITT packet level specifications. |
| INT aix1PktAdminSVCOffset | 1.3.6.1.4.1.539.12.3.1.1.16 | INTEGER | read-write | Specifies an offset that gets added to the SVC logical channel range specified by x25AdmnMaxActiveCircuits and x25AdmnNumberPVCs from RFC 1382. |
| aix1PktAdminTable | 1.3.6.1.4.1.539.12.3.1 | not-accessible | The table of administrative elements which apply to an individual X.25 link at the packet layer. | |
| INT aix1PktAdminUndefinedFacils | 1.3.6.1.4.1.539.12.3.1.1.9 | INTEGER | read-write | Enables and disables packet level allowing undefined facilities to appear in the facilities field of call processing packets. |
| INT aix1PktAdminUseRejectPkts | 1.3.6.1.4.1.539.12.3.1.1.5 | INTEGER | read-write | Enables and disables the use of packet retransmission. If the packet level is acting as a DTE it will send a REJ packet in response to a data packet received out of sequence. If the packet level is acting as a DCE, it will accept a REJ packet and retransmit the requested data packet(s). |
| INT aix1PktOperConformanceMode | 1.3.6.1.4.1.539.12.3.2.1.2 | INTEGER | read-only | The conformance testing mode to which X.25's behavior will adhere. This is the currently operational value. |
| INT aix1PktOperDBit | 1.3.6.1.4.1.539.12.3.2.1.3 | INTEGER | read-only | Determines whether the packet level will allow the D-bit in call setup packets. |
| INT aix1PktOperDefMaxPktSize | 1.3.6.1.4.1.539.12.3.2.1.10 | INTEGER | read-only | The maximum packet size to use for all calls placed on this packet layer entity. If aix1PktOperNegPktSize is set to negotiate(2), this will be the proposed value for calls placed on the packett layer entity. |
| INT aix1PktOperDefWindowSize | 1.3.6.1.4.1.539.12.3.2.1.11 | INTEGER | read-only | The maximum packet level window size to use for all calls placed on this packet layer entity. If aix1PktOperNegWindowSize is set to negotiate(2), this will be the proposed value for calls placed on the packet layer entity. |
| aix1PktOperEntry | 1.3.6.1.4.1.539.12.3.2.1 | not-accessible | The addressing information for one of this X.25 link's packet layer operational objects. | |
| INT aix1PktOperFacilChecking | 1.3.6.1.4.1.539.12.3.2.1.8 | INTEGER | read-only | Enables and disables packet level checking of the facilities field of call processing packets for validity. |
| IFI aix1PktOperIndex | 1.3.6.1.4.1.539.12.3.2.1.1 | IfIndexType | read-only | The ifIndex value of the packet level associated with these objects. |
| INT aix1PktOperNegMaxPktSize | 1.3.6.1.4.1.539.12.3.2.1.12 | INTEGER | read-only | Determines whether this packet layer entity will originate calls which negotiate packet size. |
| INT aix1PktOperNegWindowSize | 1.3.6.1.4.1.539.12.3.2.1.13 | INTEGER | read-only | Determines whether this packet layer entity will originate calls which negotiate window size. |
| INT aix1PktOperPacketizingTimer | 1.3.6.1.4.1.539.12.3.2.1.14 | INTEGER | read-only | The interval from the time of receipt of the first character from the TDM backplane to transmission of a block of characters to the X.25 protocol stack for transmission in a data packet to the network. In 100ths of a second. This value is not meaningful on backplane connections on which escape framing, TL1 packetizing, or programmable forwarding characters are active. |
| INT aix1PktOperPVCOffset | 1.3.6.1.4.1.539.12.3.2.1.15 | INTEGER | read-only | Specifies an offset that gets added to the PVC logical channel range specified by x25AdmnMaxActiveCircuits and x25AdmnNumberPVCs from RFC 1382. |
| INT aix1PktOperQBitMBit | 1.3.6.1.4.1.539.12.3.2.1.4 | INTEGER | read-only | Determines whether the packet level will check for consistency in the use of Q and M bits, i. e. that the value of the Q-bit is the same in every packet of an M-bit sequence. |
| INT aix1PktOperSendInitialRestart | 1.3.6.1.4.1.539.12.3.2.1.6 | INTEGER | read-only | Enables and disables sending of an initial restart request packet when the link comes up. |
| INT aix1PktOperStdsBody | 1.3.6.1.4.1.539.12.3.2.1.7 | INTEGER | read-only | Selects between ISO and CCITT packet level specifications. |
| INT aix1PktOperSVCOffset | 1.3.6.1.4.1.539.12.3.2.1.16 | INTEGER | read-only | Specifies an offset that gets added to the SVC logical channel range specified by x25AdmnMaxActiveCircuits and x25AdmnNumberPVCs from RFC 1382. |
| aix1PktOperTable | 1.3.6.1.4.1.539.12.3.2 | not-accessible | The table of operational elements which apply to an individual X.25 link at the packet layer. | |
| INT aix1PktOperUndefinedFacils | 1.3.6.1.4.1.539.12.3.2.1.9 | INTEGER | read-only | Enables and disables packet level allowing undefined facilities to appear in the facilities field of call processing packets. |
| INT aix1PktOperUseRejectPkts | 1.3.6.1.4.1.539.12.3.2.1.5 | INTEGER | read-only | Enables and disables the use of packet retransmission. If the packet level is acting as a DTE it will send a REJ packet in response to a data packet received out of sequence. If the packet level is acting as a DCE, it will accept a REJ packet and retransmit the requested data packet(s). |
| aix1PktStatEntry | 1.3.6.1.4.1.539.12.3.3.1 | not-accessible | The addressing information for one of this X.25 link's packet layer statistical objects. | |
| C32 aix1PktStatInCharsPerSec80s | 1.3.6.1.4.1.539.12.3.3.1.2 | Counter32 | read-only | The average number of data characters (characters in the data field of X.25 data packets) received from the network per second over the last 80 seconds by this packet layer entity. |
| IFI aix1PktStatIndex | 1.3.6.1.4.1.539.12.3.3.1.1 | IfIndexType | read-only | The ifIndex value of the packet layer entity associated with these objects. |
| C32 aix1PktStatOutCharsPerSec80s | 1.3.6.1.4.1.539.12.3.3.1.3 | Counter32 | read-only | The average number of data characters (characters in the data field of X.25 data packets) transmitted to the network per second over the last 80 seconds by this packet layer entity. |
| aix1PktStatTable | 1.3.6.1.4.1.539.12.3.3 | not-accessible | The table of statistical elements which apply to an individual X.25 link at the packet layer. | |
| C32 aix1StatErrEmptyPktsRcv | 1.3.6.1.4.1.539.12.1.19 | Counter32 | read-only | Number of empty data packets received from the network. |
| C32 aix1StatErrGfctlDiscards | 1.3.6.1.4.1.539.12.1.13 | Counter32 | read-only | Number of times the global flow control mechanism has detected a buffer level so low that it discarded data received from the backplane. |
| C32 aix1StatErrGfctlXoffs | 1.3.6.1.4.1.539.12.1.12 | Counter32 | read-only | Number of times the global flow control mechanism attempted to back pressure data flow from the backplane. |
| C32 aix1StatErrLogOutLost | 1.3.6.1.4.1.539.12.1.17 | Counter32 | read-only | Number of outbound log messages discarded to avoid flooding the log. This arises because the SLC is attempting to generate log messages too frequently on a particular TDS or globally. When this occurs, the SLC will discard the log message and increment the counter. This is not a serious error, and typically occurs during periods of intense, repetitive logging activity. |
| C32 aix1StatErrPlogCount | 1.3.6.1.4.1.539.12.1.11 | Counter32 | read-only | Number of times an internal error routine has been called due to unexpected packets received from GCOM ( or X.25). |
| C32 aix1StatErrUwteBadFlds | 1.3.6.1.4.1.539.12.1.15 | Counter32 | read-only | Number of invalid fields received in unified window transactions. If this counter is non-zero, it indicates the presence of incompatible versions or a bug in either the SLC or CLC firmware. |
| C32 aix1StatErrUwteBadTrans | 1.3.6.1.4.1.539.12.1.14 | Counter32 | read-only | Number of unified window transactions with bad transaction codes received from CLC or a remote SLC. If this counter is non-zero, it indicated the presence of incompatible versions of firmware on the SLC and CLC, or a bug in either the SLC or CLC firmware. |
| C32 aix1StatErrUwteMissingFlds | 1.3.6.1.4.1.539.12.1.16 | Counter32 | read-only | Number of required fields absent from received unified window transactions. If this counter is non-zero, it indicates the presence of incompatible versions or a bug in either the SLC or CLC firmware. |
| C32 aix1StatErrVcMuxErrs | 1.3.6.1.4.1.539.12.1.18 | Counter32 | read-only | Number of serious multiplexing errors which have occurred. Such an error generally involves an impossible value in an internal header or receipt of a message on the wrong internal channel. |
| C32 aix1StatErrX25InData | 1.3.6.1.4.1.539.12.1.7 | Counter32 | read-only | Number of data bytes from X.25 which were lost due to buffer failures. |
| C32 aix1StatErrX25OutChoked | 1.3.6.1.4.1.539.12.1.10 | Counter32 | read-only | Number of times a port has received a flow control stop message from GCOM(or perhaps from X.25), and thus entered the Choked state. This may not be indicative of a serious problem, but may also mean that data has been lost. |
| C32 aix1StatErrX25OutData | 1.3.6.1.4.1.539.12.1.8 | Counter32 | read-only | Number of data bytes from the FIFO which were discarded due to buffer failures. |
| C32 aix1StatErrX25OutPkt | 1.3.6.1.4.1.539.12.1.9 | Counter32 | read-only | Number of messages from X.25 to GCOM which were lost due to some kind of resource failure in the GCOM library. |
| C32 aix1StatInCharsPerSec80s | 1.3.6.1.4.1.539.12.1.20 | Counter32 | read-only | The average number of data characters (characters in the data field of X.25 data packets) received from the network per second over the last 80 seconds. |
| C32 aix1StatOutCharsPerSec80s | 1.3.6.1.4.1.539.12.1.21 | Counter32 | read-only | The average number of data characters (characters in the data field of X.25 data packets) transmitted to the network per second over the last 80 seconds. |
| aiX1System | 1.3.6.1.4.1.539.12.1 | |||
| aiX1VC | 1.3.6.1.4.1.539.12.6 | |||
| INT aix1VCBCNumber | 1.3.6.1.4.1.539.12.6.2.1.4 | INTEGER | read-only | The number of the Bus Connection with which this VC is associated. |
| INT aix1VCConType | 1.3.6.1.4.1.539.12.6.2.1.3 | INTEGER | read-only | The type of connection currently supported by the VC. |
| aix1VCEntry | 1.3.6.1.4.1.539.12.6.2.1 | not-accessible | The addressing information for the VC table. | |
| INT aix1VCOperPVCTimer | 1.3.6.1.4.1.539.12.6.2.1.11 | INTEGER | read-write | Defines the timer interval, in seconds used to manage the PVC's relationship with an internal backplane connection. The timer is used for different purposes depending on the value of aix1VCPVCType as described above. This object will return the value 0 if the VC in question question is not associated with a PVC. This object reflects the current operational value of this parameter. Note that unlike most operational objects, it is writable. If the value of this object is changed, it modifies the current behavior of the board, but is not saved in nonvolatile memory. |
| INT aix1VCOperPVCType | 1.3.6.1.4.1.539.12.6.2.1.10 | INTEGER | read-write | Defines the relationship between a PVC and the connection-oriented AISwitch TDM backplane. The three types represented are defined as follows: Active: initiates connections across the backplane at an interval defined by the timer. Passive: waits to respond to a connection attempt across the backplane. Uses timer to wait for reset confirm from network. Accepts backplane connection if it receives reset confirmation in time. Connect on Activity: initiates connection across backplane upon receipt of data from network. Forwards received data once connection is established. Disconnects backplane connection if a timer interval passes with no data activity in either direction. This object will return the value none(1) if the value of aix1VCConType for this VC is not pvc(11). This object reflects the current operational value of this parameter. Note that unlike most operational objects, it is writable. If the value of this object is changed, it modifies the current behavior of the board, but is not saved in nonvolatile memory. |
| C32 aix1VCPktsRcvd | 1.3.6.1.4.1.539.12.6.2.1.9 | Counter32 | read-only | The number of packets received from the packet level by the AI version 7 system software. This counts all kinds of packets, not just data packets. |
| C32 aix1VCPktsSent | 1.3.6.1.4.1.539.12.6.2.1.8 | Counter32 | read-only | The number of packets sent to the packet level by the AI version 7 system software. This counts all kinds of packets, not just data packets. |
| INT aix1VCRemoteBasePort | 1.3.6.1.4.1.539.12.6.2.1.6 | INTEGER | read-only | The baseport of the card to which the SLC is connected across the backplane. This value is meaningful only when this VC is multiplexed to the other SLC. If not, the value returned is -1. |
| INT aix1VCRemoteVCNumber | 1.3.6.1.4.1.539.12.6.2.1.7 | INTEGER | read-only | The Virtual Connection number of the VC on the remote SLC to which this VC is connected. This value is meaningful only on multiplexed VCs. |
| INT aix1VCState | 1.3.6.1.4.1.539.12.6.2.1.2 | INTEGER | read-only | The call processing state of the local Virtual Connection. This is not a standard packet level state. This is the call call processing state of the AI version 7 system firmware that mediates between the X.25 protocol stack and AISwitch internal connection mechanisms. |
| aix1VCTable | 1.3.6.1.4.1.539.12.6.2 | not-accessible | The table of objects containing information pertaining to Virtual Connections(VC). | |
| STR aix1VCUserData | 1.3.6.1.4.1.539.12.6.2.1.5 | DisplayString | read-only | The user data that was sent or received in the call request. |
| INT aix1VCVCNumber | 1.3.6.1.4.1.539.12.6.2.1.1 | INTEGER | read-only | The local Virtual Connection number. |
RFC description
Applied Innovation AI X.25 series smart line card management including packet, frame, physical, and virtual circuit statistics.
Start monitoring Applied Innovation X.25 line cards with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.