AI198CLC-MIB

All MIBs › AI198CLC-MIB

Organization: Applied Innovation Incorporated

Last Updated: 1995-05-08

Category: Hardware and Environment

Description: Manages the AI198 CLC network concentrator providing port configuration and traffic statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is AI198CLC-MIB?

AI198CLC-MIB is a proprietary MIB from Applied Innovation Incorporated for its Series 1 198 Common Logic Controller (CLC), a chassis-management module used in AI's central-office and network-concentrator equipment. The aiCLCSystem group models physical chassis configuration -- per-chassis slot-density administration objects (aiCLCBox1DensAdmin through aiCLCBox8DensAdmin, each toggling disabled/4/8/16/32-slot density for up to eight cascaded chassis) alongside aiCLCNodeName for identifying the switch in CLI prompts. It also exposes a craft/alarm-logging subsystem: aiCLCLogPortEnable and aiCLCAlmLogPort configure whether and where alarm/activity messages are printed, while aiCLCActLogLvl, aiCLCMinorAlmMin/Max, and aiCLCMajorAlmMin define the severity thresholds that classify an event as informational, minor, or major. Together these objects let an operator both provision the physical chassis topology of a multi-shelf AI Series 1 switch and tune how aggressively it reports alarms to a connected log port. It depends only on the base SNMPv2-SMI/TC conventions and registers under the aii enterprise OID (539) alongside AI's broader ai198 system-object-ID tree. It is deployed on Applied Innovation Series 1 network concentrators used for telecom central-office craft access and alarm aggregation, and administrators can download the AI198CLC-MIB file to load it into their MIB browser to map alarm severity thresholds to their NMS's own alarm classes.

IPNetwork Monitor allows you to monitor SNMP objects defined in AI198CLC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Applied Innovation Series 1 198 CLC network concentrators

Monitoring Examples

An operator polls aiCLCMinorAlmMin/Max and aiCLCMajorAlmMin to confirm the CLC's alarm severity thresholds align with the NMS's expected classification, and checks aiCLCBox1DensAdmin through aiCLCBox8DensAdmin to verify all cascaded chassis report the expected slot density; a chassis reporting disabled density when hardware is physically installed would indicate a configuration mismatch preventing that shelf's slots from being managed.

What Can Be Monitored

per-chassis slot density configuration (up to 8 chassis)
node name / chassis identification
alarm/activity log port enable and port number
activity log severity level
minor and major alarm severity thresholds

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC

DateAndTime
DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
ai198	1.3.6.1.4.1.539.2.198
ai198Ver1	1.3.6.1.4.1.539.2.198.1
ai198Ver10	1.3.6.1.4.1.539.2.198.1.0
ai198Ver102	1.3.6.1.4.1.539.2.198.1.0.2
ai198Ver103	1.3.6.1.4.1.539.2.198.1.0.3
ai198Ver104	1.3.6.1.4.1.539.2.198.1.0.4
ai198Ver12	1.3.6.1.4.1.539.2.198.1.2
ai198Ver120	1.3.6.1.4.1.539.2.198.1.2.0
ai198Ver13	1.3.6.1.4.1.539.2.198.1.3
ai198Ver130	1.3.6.1.4.1.539.2.198.1.3.0
aiCLC	1.3.6.1.4.1.539.9			The MIB Module for Series 1 Common Logic Controllers (CLC)
INT aiCLCActLogLvl	1.3.6.1.4.1.539.9.1.12	INTEGER	read-write	The alarm level which when met or exceeded will cause messages to be printed on the log port.
INT aiCLCAI2524LinkStatus	1.3.6.1.4.1.539.9.8.1.2	INTEGER	read-only	The 10BT link status for the AI2524 Router Card.
aiCLCAI2524LinkTable	1.3.6.1.4.1.539.9.8		not-accessible	A table of link status for AI2524 Router Cards.
aiCLCAI2524LinkTableEntry	1.3.6.1.4.1.539.9.8.1		not-accessible	Link information particular to AI2524 Router Cards.
INT aiCLCAI2524Port	1.3.6.1.4.1.539.9.8.1.1	INTEGER	read-only	The port number for the AI2524 Router Card.
INT aiCLCAIDIndex	1.3.6.1.4.1.539.9.7.1.1	INTEGER	read-only	The Auto ID Table index.
STR aiCLCAIDMACAdrs	1.3.6.1.4.1.539.9.7.1.6	DisplayString	read-only	The MAC address for the card.
STR aiCLCAIDManufDate	1.3.6.1.4.1.539.9.7.1.5	DisplayString	read-only	The date of manufacture for the card.
INT aiCLCAIDPort	1.3.6.1.4.1.539.9.7.1.2	INTEGER	read-only	The port number where the card resides. If the port number is not valid then 256 will be reported.
STR aiCLCAIDProduct	1.3.6.1.4.1.539.9.7.1.3	DisplayString	read-only	The product name for the card.
STR aiCLCAIDSerialNumber	1.3.6.1.4.1.539.9.7.1.4	DisplayString	read-only	The serial number for the card.
INT aiCLCAlarmLvl	1.3.6.1.4.1.539.9.1.28	INTEGER	read-write	Current Alarm Level. A write clears the alarms. A read returns the current alarm level.
INT aiCLCAliasDestMenu	1.3.6.1.4.1.539.9.4.1.6	INTEGER	read-write	This determines whether the alias appears on the destination menu.
STR aiCLCAliasDestName	1.3.6.1.4.1.539.9.4.1.4	DisplayString	read-write	The destination to be used for the alias.
STR aiCLCAliasIndex	1.3.6.1.4.1.539.9.4.1.1	DisplayString	read-create	The alias name in the form of a DisplayString. This is the key field for the Alias Table.
STR aiCLCAliasPosition	1.3.6.1.4.1.539.9.4.1.14	DisplayString	read-write	The position of the alias in the alias list. When 'set' a new or an existing alias, this value can be used as a flag to request a saving to the beginning (0) or to the end (99999) of the alias list. As default, the CLC always saves a new alias to the end and a modified alias to its old position.
INT aiCLCAliasRowStatus	1.3.6.1.4.1.539.9.4.1.2	INTEGER	read-create	The Alias Table Entry row status.
aiCLCAliasTable	1.3.6.1.4.1.539.9.4		not-accessible	A table of call alias information.
aiCLCAliasTableEntry	1.3.6.1.4.1.539.9.4.1		not-accessible	Information unique to a particular alias.
INT aiCLCAlmLogPort	1.3.6.1.4.1.539.9.1.11	INTEGER	read-write	The Alarm and Activity Log Port Number.
STR aiCLCAlternRoute	1.3.6.1.4.1.539.9.4.1.13	DisplayString	read-write	The string may specify a destination or an alias macro that is used as an alternate route.
STR aiCLCApplicString	1.3.6.1.4.1.539.9.4.1.10	DisplayString	read-write	The application string which may be a string or an alias macro.
INT aiCLCAsyncAdminStatus	1.3.6.1.4.1.539.9.6.1.3	INTEGER	read-write	The key field for the Async table entry.
INT aiCLCAsyncDiscType	1.3.6.1.4.1.539.9.6.1.4	INTEGER	read-write	The disconnect type for the async port.
I32 aiCLCAsyncifIndex	1.3.6.1.4.1.539.9.6.1.1	Integer32	read-only	The ifIndex from the interfaces table.
INT aiCLCAsyncPort	1.3.6.1.4.1.539.9.6.1.2	INTEGER	read-only	The AISwitch port number.
aiCLCAsyncTable	1.3.6.1.4.1.539.9.6		not-accessible	The Async Table.
aiCLCAsyncTableEntry	1.3.6.1.4.1.539.9.6.1		not-accessible	An Async Table entry.
INT aiCLCAsyncTrap	1.3.6.1.4.1.539.9.1.72	INTEGER	read-write	When this object is enabled, link up/link down traps are sent to managers listed in the trap table. The traps are normally not used and must specifically be enabled by a manager.
INT aiCLCAutoCLCUpdate	1.3.6.1.4.1.539.9.1.27	INTEGER	read-write	Automatic configuration of the backup CLC when the active CLC's configuration changes.
aiCLCAutoIDTable	1.3.6.1.4.1.539.9.7		not-accessible	A table of board identification information for an AISwitch.
aiCLCAutoIDTableEntry	1.3.6.1.4.1.539.9.7.1		not-accessible	Board Identification information for a particular card.
INT aiCLCBackupCLC	1.3.6.1.4.1.539.9.1.46	INTEGER	read-only	Status of the Backup CLC.
INT aiCLCBackupCLCHealth	1.3.6.1.4.1.539.9.1.76	INTEGER	read-only	Health status of the Backup CLC.
STR aiCLCBanner	1.3.6.1.4.1.539.9.1.77	DisplayString	read-write	The banner for the CLC. There is a maximum 15 lines with 76 characters allowed per line.
INT aiCLCBox1DensAdmin	1.3.6.1.4.1.539.9.1.1	INTEGER	read-write	The administration value for the slot density for Chassis 1 of and AISwitch.
INT aiCLCBox2DensAdmin	1.3.6.1.4.1.539.9.1.2	INTEGER	read-write	The administration value for the slot density for Chassis 2 of and AISwitch.
INT aiCLCBox3DensAdmin	1.3.6.1.4.1.539.9.1.3	INTEGER	read-write	The administration value for the slot density for Chassis 3 of and AISwitch.
INT aiCLCBox4DensAdmin	1.3.6.1.4.1.539.9.1.4	INTEGER	read-write	The administration value for the slot density for Chassis 4 of and AISwitch.
INT aiCLCBox5DensAdmin	1.3.6.1.4.1.539.9.1.5	INTEGER	read-write	The administration value for the slot density for Chassis 5 of and AISwitch.
INT aiCLCBox6DensAdmin	1.3.6.1.4.1.539.9.1.6	INTEGER	read-write	The administration value for the slot density for Chassis 6 of and AISwitch.
INT aiCLCBox7DensAdmin	1.3.6.1.4.1.539.9.1.7	INTEGER	read-write	The administration value for the slot density for Chassis 7 of and AISwitch.
INT aiCLCBox8DensAdmin	1.3.6.1.4.1.539.9.1.8	INTEGER	read-write	The administration value for the slot density for Chassis 8 of and AISwitch.
INT aiCLCBufAlign	1.3.6.1.4.1.539.9.1.39	INTEGER	read-only	Number of buffer re-alignments
INT aiCLCBufAllocErr	1.3.6.1.4.1.539.9.1.38	INTEGER	read-only	Number of buffer allocation errors
INT aiCLCBuffers	1.3.6.1.4.1.539.9.1.36	INTEGER	read-only	Number of buffers created
INT aiCLCCaamlIdleTmr	1.3.6.1.4.1.539.9.1.19	INTEGER	read-write	The number of seconds that must pass without any messages being printed on CAAML, before the CAAML connection is torn down.
INT aiCLCCaamlRetryTmr	1.3.6.1.4.1.539.9.1.20	INTEGER	read-write	The number of seconds that must pass after an unsuccessful attempt at bringing the CAAML connection up before a retry will occur.
STR aiCLCCaamlRoute	1.3.6.1.4.1.539.9.1.18	DisplayString	read-write	Name of the destination used for the CAAML Log.
STR aiCLCCallData	1.3.6.1.4.1.539.9.4.1.9	DisplayString	read-write	The call data which may be a destination or an alias macro.
STR aiCLCCalledAdrs	1.3.6.1.4.1.539.9.4.1.5	DisplayString	read-write	The called address used in the macro.
STR aiCLCCalledProtoStr	1.3.6.1.4.1.539.9.4.1.11	DisplayString	read-write	The string that may specify the called protocol for a call using the alias macro.
STR aiCLCCallerAdrs	1.3.6.1.4.1.539.9.4.1.8	DisplayString	read-write	The caller address used in the macro.
STR aiCLCCallerProtoStr	1.3.6.1.4.1.539.9.4.1.12	DisplayString	read-write	The string that may specify the calling protocol for a call using the alias macro.
aiCLCCardTable	1.3.6.1.4.1.539.9.2		not-accessible	A table of line cards contained in an AISwitch.
aiCLCCardTableEntry	1.3.6.1.4.1.539.9.2.1		not-accessible	Information about a particular line card.
INT aiCLCColdStartTrapDelay	1.3.6.1.4.1.539.9.1.74	INTEGER	read-write	The sending of the cold start trap may be delayed to allow system startup and link startup to occur. This will typically be done on systems using IP over X.25 links. This value is specified in seconds.
INT aiCLCConnectionsPlaced	1.3.6.1.4.1.539.9.1.42	INTEGER	read-only	Number of connections placed
INT aiCLCConnInfo	1.3.6.1.4.1.539.9.1.21	INTEGER	read-write	Print connection information on user terminals.
INT aiCLCCopyFlash	1.3.6.1.4.1.539.9.1.59	INTEGER	read-write	Copy Flash from one bank to another. AP - Active Primary AS - Active Secondary BP - Backup Primary BS - Backup Secondary A read returns a value corresponding to the activity in progress. A write causes the requested transfer to begin. A write of none(1) is not permitted and is flagged as an error.
INT aiCLCCopyFlashToSLC	1.3.6.1.4.1.539.9.1.60	INTEGER	read-write	This object is used to begin or obtain the status of the SLC Download process. Writing a SLC base port to this object will cause the SLC at that baseport to search for new firmware on the active or backup CLC. If a valid SLC image is located, then the SLC will download that code and begin to run. A read of this variable will return the value 1 if a SLC download is in process, or a 0 if there aren't downloads in progress.
INT aiCLCCpu	1.3.6.1.4.1.539.9.1.47	INTEGER	read-only	The location of the active CLC.
INT aiCLCCpuXacts	1.3.6.1.4.1.539.9.1.40	INTEGER	read-only	Number of inter-cpu transactions
INT aiCLCCpyConfig	1.3.6.1.4.1.539.9.1.48	INTEGER	read-write	Copy configuration from active CLC to backup CLC. A write of copy(2) causes the transfer to begin. A read will return copy(2) if a transfer is in progress and a none(1) if idle. A write of none(1) is not permitted and is flagged as an error.
INT aiCLCCraftLogEcho	1.3.6.1.4.1.539.9.1.17	INTEGER	read-write	Echo Alarm and Activity information on the craft port.
STR aiCLCCrashMsgText	1.3.6.1.4.1.539.9.1.69	DisplayString	read-only	This is a place holder. It is required to allow verification of OID of trap crash message object. A read of this object will return an empty string.
INT aiCLCCTAdminStatus	1.3.6.1.4.1.539.9.2.1.2	INTEGER	read-write	This represents the state of the card and may be used to change the state of the card. For DUMB cards if one port on the card is up, then the entire card is considered to be up.
INT aiCLCCTAutoIdIndex	1.3.6.1.4.1.539.9.2.1.13	INTEGER	read-only	The index into the Auto Id table associated with this line card.
INT aiCLCCTBasePort	1.3.6.1.4.1.539.9.2.1.3	INTEGER	read-write	The base port number for the line card.
INT aiCLCCTCardReset	1.3.6.1.4.1.539.9.2.1.18	INTEGER	read-write	Card is included when * is used with STPSLC, DISABL, or ENABL.
INT aiCLCCTCardSnmpState	1.3.6.1.4.1.539.9.2.1.7	INTEGER	read-only	This field describes the capabilities of the card. A card may not be snmp capable and will have the value nosnmp(1). A card may be snmp capable but isn't present on the IP network. This card is may proxied for and will have the type snmpProxy(2). The last type of snmp capability is where are card is present on the IP network and can be managed directly. This card will have a type of snmpDirect(3).
INT aiCLCCTCardType	1.3.6.1.4.1.539.9.2.1.8	INTEGER	read-write	The line card type.
INT aiCLCCTHighPort	1.3.6.1.4.1.539.9.2.1.4	INTEGER	read-only	The highest port number accessible by the line card.
INT aiCLCCTIndex	1.3.6.1.4.1.539.9.2.1.1	INTEGER	read-write	The card table index.
IP aiCLCCTIPAdrs	1.3.6.1.4.1.539.9.2.1.10	IpAddress	read-write	The IP address associated with the line card.
INT aiCLCCTIPRange	1.3.6.1.4.1.539.9.2.1.16	INTEGER	read-write	The IP address range of this line card.
C32 aiCLCCTLastSequenceNumber	1.3.6.1.4.1.539.9.2.1.19	Counter32	read-only	This is the sequence number of the last trap sent by this card. The sequence number starts at zero following a hardware reset or power-up. When the sequence number reaches 0xffffffff, it rolls over to 0 on the next trap.
STR aiCLCCTRdCommStr	1.3.6.1.4.1.539.9.2.1.5	DisplayString	read-write	The SNMP read community string by which this card is known.
INT aiCLCCTRealCardType	1.3.6.1.4.1.539.9.2.1.15	INTEGER	read-only	The real line card type.
IP aiCLCCTRtr2IPAdrs	1.3.6.1.4.1.539.9.2.1.20	IpAddress	read-write	The secondary router ip address for this line card.
IP aiCLCCTRtrIPAdrs	1.3.6.1.4.1.539.9.2.1.11	IpAddress	read-write	The router ip address for this line card.
INT aiCLCCTSlotExp	1.3.6.1.4.1.539.9.2.1.9	INTEGER	read-write	The number of slots the line card is to logically occupy.
IP aiCLCCTSubnetMask	1.3.6.1.4.1.539.9.2.1.12	IpAddress	read-write	The subnet mask for this line card.
OID aiCLCCTSysOID	1.3.6.1.4.1.539.9.2.1.14	OBJECT IDENTIFIER	read-only	The SNMP System OID associated with this line card.
INT aiCLCCTTelnetPort	1.3.6.1.4.1.539.9.2.1.17	INTEGER	read-write	The telnet port of this line card.
STR aiCLCCTWrCommStr	1.3.6.1.4.1.539.9.2.1.6	DisplayString	read-write	The SNMP write community string by which this card is known.
INT aiCLCDaylightSavings	1.3.6.1.4.1.539.9.1.79	INTEGER	read-write	Daylight Savings
INT aiCLCDebugVal	1.3.6.1.4.1.539.9.1.56	INTEGER	read-write	Value of the debug variable representing all debug combinations.
INT aiCLCDestBaud	1.3.6.1.4.1.539.9.5.1.6	INTEGER	read-write	This is used to turn on or turn off whether the baud rate is checked before connecting to the destination.
INT aiCLCDestCallInit	1.3.6.1.4.1.539.9.5.1.3	INTEGER	read-write	This is used to turn on or turn off call initiation on ports assigned to this destination.
STR aiCLCDestConnMsg	1.3.6.1.4.1.539.9.5.1.14	DisplayString	read-write	This string is forced out the destination port when a connection begins.
INT aiCLCDestDisc	1.3.6.1.4.1.539.9.5.1.4	INTEGER	read-write	This is used to turn on or turn off the user's disconnect keys when connected to this destination.
STR aiCLCDestDiscMsg	1.3.6.1.4.1.539.9.5.1.15	DisplayString	read-write	This string is forced out the destination port when a connection terminates.
INT aiCLCDestDispMenu	1.3.6.1.4.1.539.9.5.1.5	INTEGER	read-write	This is used to turn on or turn off the display of the destination name on the destination menu.
INT aiCLCDestIsSwitch	1.3.6.1.4.1.539.9.5.1.7	INTEGER	read-write	This is used to indicate that the destination is another AI switch.
INT aiCLCDestMenu	1.3.6.1.4.1.539.9.1.23	INTEGER	read-write	Print Destination Menu on user terminals.
INT aiCLCDestMenuFmt	1.3.6.1.4.1.539.9.1.26	INTEGER	read-write	The number of columns used to print the destination menu.
STR aiCLCDestMenuMsg	1.3.6.1.4.1.539.9.5.1.13	DisplayString	read-write	This string is displayed next to the destination in the destination menu.
STR aiCLCDestName	1.3.6.1.4.1.539.9.5.1.1	DisplayString	read-create	The name of the destination in the form of an OCTET STRING.
INT aiCLCDestNumFree	1.3.6.1.4.1.539.9.5.1.19	INTEGER	read-only	This is used to determine the number of ports that are free for this destination.
INT aiCLCDestNumPorts	1.3.6.1.4.1.539.9.5.1.17	INTEGER	read-only	This is used to determine the number of ports assigned to this destination.
INT aiCLCDestNumUsed	1.3.6.1.4.1.539.9.5.1.18	INTEGER	read-only	This is used to determine the number of ports in use for this destination.
STR aiCLCDestPortList	1.3.6.1.4.1.539.9.5.1.21	DisplayString	read-only	This string contains a list of port numbers assigned to this destination.
STR aiCLCDestPswd	1.3.6.1.4.1.539.9.5.1.11	DisplayString	read-write	This is password associated with the destination.
INT aiCLCDestQHigh	1.3.6.1.4.1.539.9.5.1.20	INTEGER	read-only	This is used to determine the maximum number of ports that were queued to this destination.
STR aiCLCDestQPswd	1.3.6.1.4.1.539.9.5.1.12	DisplayString	read-write	This is password used to control access to the queue management functions associated with the destination.
INT aiCLCDestRowStatus	1.3.6.1.4.1.539.9.5.1.2	INTEGER	read-create	The key field for the Destination table entry.
INT aiCLCDestState	1.3.6.1.4.1.539.9.5.1.16	INTEGER	read-write	This is used to enable or disable the destination.
aiCLCDestTable	1.3.6.1.4.1.539.9.5		not-accessible	This table contains information pertaining to destinations and their attributes.
aiCLCDestTableEntry	1.3.6.1.4.1.539.9.5.1		not-accessible	This information pertains to one entry in the destination table.
I32 aiCLCDestTmrDelay	1.3.6.1.4.1.539.9.5.1.10	Integer32	read-write	This value is the delay in milliseconds before allowing further calls on the destination after a call terminates. The range is 1mS to 4368000mS or about 72 hours.
INT aiCLCDestTmrType	1.3.6.1.4.1.539.9.5.1.8	INTEGER	read-write	This is used to set the type of timer associated with the destination.
I32 aiCLCDestTmrVal	1.3.6.1.4.1.539.9.5.1.9	Integer32	read-write	This value is the timer duration in milliseconds ranging from 1mS to 4368000mS or about 72 hours.
INT aiCLCDestWaitForPort	1.3.6.1.4.1.539.9.5.1.22	INTEGER	read-write	This is used to allow the user to wait for a port when all ports for the destination are busy.
INT aiCLCDLAlias	1.3.6.1.4.1.539.9.1.55	INTEGER	read-write	Verbose report of alias translations.
INT aiCLCDLMsgAll	1.3.6.1.4.1.539.9.1.53	INTEGER	read-write	Verbose report of log messages.
INT aiCLCDLNoBody	1.3.6.1.4.1.539.9.1.54	INTEGER	read-write	Report log messages headers only.
INT aiCLCDLWinIn	1.3.6.1.4.1.539.9.1.50	INTEGER	read-write	Verbose report of incoming Window Transactions.
INT aiCLCDLWinOut	1.3.6.1.4.1.539.9.1.51	INTEGER	read-write	Verbose report of outgoing Window Transactions.
INT aiCLCDLWinUni	1.3.6.1.4.1.539.9.1.52	INTEGER	read-write	Verbose report of unified Window Transactions.
INT aiCLCDLWinVerbose	1.3.6.1.4.1.539.9.1.49	INTEGER	read-write	Verbose report of Window Transactions.
INT aiCLCDownSpd	1.3.6.1.4.1.539.9.1.24	INTEGER	read-write	Allow ports of different speeds to be connected.
INT aiCLCEECRC	1.3.6.1.4.1.539.9.1.44	INTEGER	read-only	Configuration EEPROM CRC.
INT aiCLCEEPromFaults	1.3.6.1.4.1.539.9.1.34	INTEGER	read-only	Number of EEProm failures
INT aiCLCEIADtrConn	1.3.6.1.4.1.539.9.6.1.9	INTEGER	read-write	Upon connect DTR may be configured to be on(1), or off(2).
INT aiCLCEIADtrDisc	1.3.6.1.4.1.539.9.6.1.7	INTEGER	read-write	Upon disconnect DTR may be configured to be on(1), or off(2).
INT aiCLCEIADtrToggle	1.3.6.1.4.1.539.9.6.1.11	INTEGER	read-write	Upon disconnect DTR may be configured to toggle (on(1)) or not (off(2)).
INT aiCLCEIARtsConn	1.3.6.1.4.1.539.9.6.1.8	INTEGER	read-write	Upon connect RTS may be configured to be on(1), or off(2).
INT aiCLCEIARtsDisc	1.3.6.1.4.1.539.9.6.1.6	INTEGER	read-write	Upon disconnect RTS may be configured to be on(1), or off(2).
INT aiCLCEIARtsToggle	1.3.6.1.4.1.539.9.6.1.10	INTEGER	read-write	Upon disconnect RTS may be configured to toggle (on(1)) or not (off(2)).
INT aiCLCEIASignals	1.3.6.1.4.1.539.9.6.1.5	INTEGER	read-write	The EIA signals may be disabled (eiaDisabled(1)) or configured for pass through (dsrRtsPass(2)). Additionally the port can be configured to disconnect on loss of DSR (dsrOffDisc(3)), disconnect on change of state of DSR (dsrOnOffDisc(4)), disconnect on loss of DCD (dcdOffDisc(5)), or disconnect on change of state of DCD (dcdOnOffDisc(6)).
INT aiCLCFaultSwitch	1.3.6.1.4.1.539.9.1.25	INTEGER	read-write	In dual CLC systems, a fault on the active CLC will cause automatic switchover from the faulted CLC to the backup CLC.
INT aiCLCFreeBuffers	1.3.6.1.4.1.539.9.1.37	INTEGER	read-only	Number of free buffers
I32 aiCLCFreeEE	1.3.6.1.4.1.539.9.1.35	Integer32	read-only	Number of free EEProm bytes
INT aiCLCFtpCtrlPort	1.3.6.1.4.1.539.9.1.75	INTEGER	read-write	The FTP Server control port number. New values for this object take affect after a reset. The FTP Server data port is automatically selected to be one less than the control port.
INT aiCLCHoldConn	1.3.6.1.4.1.539.9.1.31	INTEGER	read-only	Number of connections placed on hold
INT aiCLCInitStrings	1.3.6.1.4.1.539.9.1.58	INTEGER	read-only	This object is used to test the condition of the strings on the CLC. A read of this object causes the test to be performed and then reports the outcome.
IP aiCLCIPAdrs	1.3.6.1.4.1.539.9.1.63	IpAddress	read-write	The IP address for the CLC.
INT aiCLCLastTrapMsgNum	1.3.6.1.4.1.539.9.1.68	INTEGER	read-only	This is the message number of the last generated trap log message.
STR aiCLCLastTrapMsgText	1.3.6.1.4.1.539.9.1.67	DisplayString	read-only	This is the message text associated with the last generated trap.
STR aiCLCLinkNum	1.3.6.1.4.1.539.9.4.1.7	DisplayString	read-write	The link number or alias macro used for the link number.
INT aiCLCLogPortEnable	1.3.6.1.4.1.539.9.1.10	INTEGER	read-write	Enable/Disable the display of Alarm and Activity Information.
INT aiCLCLongBrkLen	1.3.6.1.4.1.539.9.1.22	INTEGER	read-write	Long Break length in milliseconds rounded to the nearest 1/64th second.
INT aiCLCMajorAlmMax	1.3.6.1.4.1.539.9.1.16	INTEGER	read-write	The alarm level which when exceeded will not cause a major alarm to be reported.
INT aiCLCMajorAlmMin	1.3.6.1.4.1.539.9.1.15	INTEGER	read-write	The alarm level which when met or exceeded will cause a major alarm to be reported.
INT aiCLCMinorAlmMax	1.3.6.1.4.1.539.9.1.14	INTEGER	read-write	The alarm level which when exceeded will not cause a minor alarm to be reported.
INT aiCLCMinorAlmMin	1.3.6.1.4.1.539.9.1.13	INTEGER	read-write	The alarm level which when met or exceeded will cause a minor alarm to be reported.
STR aiCLCNodeName	1.3.6.1.4.1.539.9.1.9	DisplayString	read-write	This associates a name with an AI Switch. This string is part of the prompt for a user port.
INT aiCLCNumEventsSinceLastTrap	1.3.6.1.4.1.539.9.1.70	INTEGER	read-only	This is the number of times an event that would generate a trap has occurred since the last time that trap was transmitted. The traps are not transmitted while the aiCLCTrapTimer is running. This number will accompany the next transmitted trap. This object is really a place holder. It is required to allow verification of the OID of this information in a trap (var-bind). A read of this object will result in an error from the snmp agent.
INT aiCLCNumPorts	1.3.6.1.4.1.539.9.1.32	INTEGER	read-only	Number of ports detected
INT aiCLCPortAlm	1.3.6.1.4.1.539.9.3.1.11	INTEGER	read-only	The current alarm value for the port.
INT aiCLCPortDedicated	1.3.6.1.4.1.539.9.3.1.3	INTEGER	read-write	The port number to which this port is dedicated when the type is 'dedicated'.
STR aiCLCPortDesc	1.3.6.1.4.1.539.9.3.1.12	DisplayString	read-write	This is used to describe the port in textual form.
INT aiCLCPortDestMenu	1.3.6.1.4.1.539.9.3.1.6	INTEGER	read-write	This determines whether the destination menu is displayed when the port type is 'user'.
STR aiCLCPortDestName	1.3.6.1.4.1.539.9.3.1.4	DisplayString	read-write	The destination to which this port is assigned.
INT aiCLCPortEcho	1.3.6.1.4.1.539.9.3.1.5	INTEGER	read-write	This determines whether echoing is on when the port is connected to the AISwitch.
INT aiCLCPortNumber	1.3.6.1.4.1.539.9.3.1.1	INTEGER	read-only	The AISwitch Port Number associated with the entry.
INT aiCLCPortQueue	1.3.6.1.4.1.539.9.3.1.7	INTEGER	read-write	This determines whether the port is allowed to be put on hold when the destination port is busy.
INT aiCLCPortReset	1.3.6.1.4.1.539.9.3.1.13	INTEGER	read-write	Port is included when * is used with DISABL or ENABL.
INT aiCLCPortState	1.3.6.1.4.1.539.9.3.1.9	INTEGER	read-only	This is used to determine whether the port is enabled or disabled.
INT aiCLCPortStatus	1.3.6.1.4.1.539.9.3.1.10	INTEGER	read-only	This value is the port status which include the following values; idle(1), selecting class of service selcos(2), entering password pswd(3), entering username(4), entering destination network address dna(5), entering a TCP address tcp(6), answering 'wish to queue' queue(7), answering 'wish to hold' holdq(8), connected to switch ai(9), connected conn(10), in the process of connecting preconn(11), in the process of disconnecting predisc(12), hold(13), network connect pending netconn(14), performing a file transfer file(15), inactive inact(16), slc is receiving software download swdwn(17), port is using a telnet client telnetClient(18), unknown(20).
aiCLCPortTable	1.3.6.1.4.1.539.9.3		not-accessible	A table of port information.
aiCLCPortTableEntry	1.3.6.1.4.1.539.9.3.1		not-accessible	Information unique to a particular port.
INT aiCLCPortType	1.3.6.1.4.1.539.9.3.1.2	INTEGER	read-write	This is used to configure how the port is being used.
INT aiCLCQueuedPorts	1.3.6.1.4.1.539.9.1.33	INTEGER	read-only	Number of ports in wait queue
IP aiCLCRadiusAddr1	1.3.6.1.4.1.539.9.1.85	IpAddress	read-write	The IP address for the Primary RADIUS Server.
IP aiCLCRadiusAddr2	1.3.6.1.4.1.539.9.1.88	IpAddress	read-write	The IP address for the Secondary RADIUS Server.
INT aiCLCRadiusEnabled	1.3.6.1.4.1.539.9.1.84	INTEGER	read-write	RADIUS enabled/disabled state.
INT aiCLCRadiusPort1	1.3.6.1.4.1.539.9.1.86	INTEGER	read-write	The port number associated with the Primary RADIUS Server.
INT aiCLCRadiusPort2	1.3.6.1.4.1.539.9.1.89	INTEGER	read-write	The port number associated with the Secondary RADIUS Server.
STR aiCLCRadiusSecret1	1.3.6.1.4.1.539.9.1.87	DisplayString	read-write	The Secret for the Primary RADIUS Server.
STR aiCLCRadiusSecret2	1.3.6.1.4.1.539.9.1.90	DisplayString	read-write	The Secret for the Secondary RADIUS Server.
STR aiCLCReadCommunity	1.3.6.1.4.1.539.9.1.61	DisplayString	read-write	The read community string for the CLC.
IP aiCLCRouterIPAdrs	1.3.6.1.4.1.539.9.1.64	IpAddress	read-write	The router ip address for the CLC.
DAT aiCLCRstTimeDate	1.3.6.1.4.1.539.9.1.30	DateAndTime	read-only	This is the Time and Date of Last Reset. The DateAndTime type is a structured OCTET STRING, defined in v2-tc.my (SNMPv2 Textual Conventions).
INT aiCLCSLCProtocolCode	1.3.6.1.4.1.539.9.3.1.8	INTEGER	read-write	This is the slc protocol processing code.
INT aiCLCSLCXacts	1.3.6.1.4.1.539.9.1.41	INTEGER	read-only	Number of SLC Window transactions
INT aiCLCSNTP	1.3.6.1.4.1.539.9.1.80	INTEGER	read-write	SNTP
INT aiCLCSNTPPollInterval	1.3.6.1.4.1.539.9.1.83	INTEGER	read-write	SNTP Poll Interval
IP aiCLCSNTPPrimaryServer	1.3.6.1.4.1.539.9.1.81	IpAddress	read-write	The IP address for the Primary SNTP Server.
IP aiCLCSNTPSecondaryServer	1.3.6.1.4.1.539.9.1.82	IpAddress	read-write	The IP address for the Secondary SNTP Server.
IP aiCLCSubnetIPAdrs	1.3.6.1.4.1.539.9.1.65	IpAddress	read-write	The subnet mask for the CLC.
INT aiCLCSwitchRestart	1.3.6.1.4.1.539.9.1.57	INTEGER	read-write	A write of this object causes the switch to be restarted in the designated mode. A read of this object always returns the value restart(1), which has no particular significance.
aiCLCSystem	1.3.6.1.4.1.539.9.1
IP aiCLCTacacsAddr1	1.3.6.1.4.1.539.9.1.93	IpAddress	read-write	The IP address for the Primary TACACS Server.
IP aiCLCTacacsAddr2	1.3.6.1.4.1.539.9.1.96	IpAddress	read-write	The IP address for the Secondary TACACS Server.
INT aiCLCTacacsEnabled	1.3.6.1.4.1.539.9.1.92	INTEGER	read-write	TACACS+ enabled/disabled state.
INT aiCLCTacacsPort1	1.3.6.1.4.1.539.9.1.94	INTEGER	read-write	The port number associated with the Primary TACACS Server.
INT aiCLCTacacsPort2	1.3.6.1.4.1.539.9.1.97	INTEGER	read-write	The port number associated with the Secondary TACACS Server.
STR aiCLCTacacsSecret1	1.3.6.1.4.1.539.9.1.95	DisplayString	read-write	The Secret for the Primary TACACS Server.
STR aiCLCTacacsSecret2	1.3.6.1.4.1.539.9.1.98	DisplayString	read-write	The Secret for the Secondary TACACS Server.
INT aiCLCTelnetServerPort	1.3.6.1.4.1.539.9.1.73	INTEGER	read-write	The tcp port number used by the telnet server may be configured using the aiCLCTelnetServerPort object. By default this object uses the well known port number 23.
DAT aiCLCTimeDate	1.3.6.1.4.1.539.9.1.29	DateAndTime	read-write	This is the Current Time and Date. The DateAndTime type is a structured OCTET STRING, defined in v2-tc.my (SNMPv2 Textual Conventions).
INT aiCLCTimeZone	1.3.6.1.4.1.539.9.1.78	INTEGER	read-write	The time zone offset for the CLC in minutes.
INT aiCLCTrapInterval	1.3.6.1.4.1.539.9.1.91	INTEGER	read-write	The interval of the faulted primary CLC trap. If the primary CLC was faulted and the interval was set between 1 and 65535 minutes, the backup CLC will repeatedly send the faulted primary CLC trap. To disable this trap, set the interval to 0. If reset the interval to 0 after the primary CLC has been faulted, the backup CLC will stop sending the trap. New value for this object will take affect without rebooting the switch. This object has no effect on other traps.
IP aiCLCTrapIPAdrs	1.3.6.1.4.1.539.9.1.66.1.1	IpAddress	read-create	The IP Address of the destination to which SNMP Traps will be sent.
INT aiCLCTrapRowStatus	1.3.6.1.4.1.539.9.1.66.1.2	INTEGER	read-create	The aiCLC Trap Table entry row status.
aiCLCTrapTable	1.3.6.1.4.1.539.9.1.66		not-accessible	A table of Trap destination IP addresses.
aiCLCTrapTableEntry	1.3.6.1.4.1.539.9.1.66.1		not-accessible	Information about a particular Trap destination.
INT aiCLCTrapTimer	1.3.6.1.4.1.539.9.1.71	INTEGER	read-write	After a trap is generated, a timer is started. If the event that generated the trap occurs while the timer is running, no trap will be generated for the event. The value of this object is the duration of the timer in SECONDS.
INT aiCLCTxTail	1.3.6.1.4.1.539.9.1.43	INTEGER	read-only	Number of TXTail misses
STR aiCLCVersion	1.3.6.1.4.1.539.9.1.45	DisplayString	read-only	Software version, time, and date of currently executing software
STR aiCLCWriteCommunity	1.3.6.1.4.1.539.9.1.62	DisplayString	read-write	The write community string for the CLC.
INT aiCLCXlatType	1.3.6.1.4.1.539.9.4.1.3	INTEGER	read-write	The type of alias translation to be performed.
aii	1.3.6.1.4.1.539
aiSystemOID	1.3.6.1.4.1.539.2

RFC description

Manages configuration and status objects for the Aviat Networks AI-198 cell link controller; vendor-private.

Start monitoring Applied Innovation Series 1 198 CLC network concentrators (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download AI198CLC-MIB

What Is AI198CLC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description