ACC-SERVICEPROFILE

All MIBs › ACC-SERVICEPROFILE

Category: Device Management, Vendor: ACC/Ericsson

Description: Manages service profile definitions on ACC/Ericsson routers, providing templates that bundle authentication, authorization, and network access parameters for subscriber services.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ACC-SERVICEPROFILE?

ACC-SERVICEPROFILE is an ACC Telecom / Ericsson enterprise MIB for managing service profile definitions on ACC-based routers, where a service profile is a reusable template bundling authentication, authorization, and network access parameters for subscriber services. It belongs to the broadband/dial access router technology area and its data is fundamentally configuration-oriented: defining and applying named service profiles rather than reporting raw traffic counters. Its monitoring relevance is in confirming that the correct service profile is applied to subscriber sessions and that profile parameters (such as authentication/authorization policy references) are consistent, which is a software-configuration health check rather than a hardware/environmental one. Because ACC's product line was acquired into Ericsson's portfolio, this MIB has an implicit dependency on related ACC/Ericsson AAA and network-access MIBs that the referenced profiles configure. Typical deployment context is ISP or carrier access routers/aggregation devices handling subscriber dial-up or broadband sessions. Engineers can download the ACC-SERVICEPROFILE file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ACC-SERVICEPROFILE. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ACC/Ericsson subscriber access router

Monitoring Examples

No sample objects were provided for this module, so specific object names cannot be confirmed; in general use, an administrator would expect to poll or verify the active service profile name assigned to a subscriber session and cross-check it against the profile's configured authentication/authorization parameters to ensure the correct access policy is being enforced. Mismatches between expected and applied profiles would indicate misconfiguration in the access control chain.

What Can Be Monitored

service profile assignment
profile authentication/authorization parameters

Imported Objects

From ACC-MIB

DisplayString
IfIndex
RowStatus
SmdsAddress
accBRG	OBJECT-IDENTITY

From ACC-SYSTEM

accTrapLogSeqNum

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
OBJECT-TYPE
TimeTicks

OIDs

OID symbolic	OID numeric	Type	Access	Description
accServiceProfile	1.3.6.1.4.1.5.1.1.65
STR accServiceProfileAccessPart	1.3.6.1.4.1.5.1.1.65.1.1.8	DisplayString	read-write	The name of the access partition to use for this service. If the service type is CDNR, an access partition name must be configured and the corresponding access partition should be defined in the Access Partition Table. Otherwise, this object need not be configured.
INT accServiceProfileAccountingOptn	1.3.6.1.4.1.5.1.1.65.1.1.25	INTEGER	read-write	The Accounting option for this service profile. This is used to enable or disable RADIUS accounting for PPP sessions associated with this service profile. RADIUS accounting is enabled by default.
STR accServiceProfileActiveName	1.3.6.1.4.1.5.1.1.65.2.1.3	DisplayString	read-only	The name of the service profile currently active for this physical port. If a service profile has been manually configured for this port, the active profile will always be the same as the configured profile. Otherwise, the active service profile is assigned dynamically when the physical circuit is connected.
INT accServiceProfileActiveType	1.3.6.1.4.1.5.1.1.65.2.1.4	INTEGER	read-only	The type of service associated with the active service profile.
INT accServiceProfileAdminState	1.3.6.1.4.1.5.1.1.65.1.1.3	INTEGER	read-write	The administrative state of this service profile. If the administrative state is set to disabled, no new connections will be allowed using this profile, and all existing connections using the profile will be terminated. If the administrative state is set to drained, no new connections will be accepted, but existing connections will be maintained.
INT accServiceProfileAuthMethod	1.3.6.1.4.1.5.1.1.65.1.1.6	INTEGER	read-write	The default PPP authentication method for this service profile.
INT accServiceProfileAuthPreference	1.3.6.1.4.1.5.1.1.65.1.1.24	INTEGER	read-write	The authentication preference for this service profile. This This object is useful for altering the behavior of PPP negotiation when providing service to clietns that cannot be configured to deny negotiation of the stronger CHAP authentication method and PAP authentication is required. PAP is the default setting.
INT accServiceProfileBandwidthMgmt	1.3.6.1.4.1.5.1.1.65.1.1.26	INTEGER	read-write	The bandwidth management protocols that can be negotiated for PPP connections associated with this service profile. BACP enables the negotiation of the Bandwidth Allocation Control Protocol (BACP) and Bandwidth Allocation Protocol (BAP). This is the default setting. MLX enables the Multilink Extended (MLX) protocol. MLX is compatible with MP+. DEFAULT disables negotiation of BACP or MLX and uses local mechanisms for adding bandwidth to PPP multilink connections. ANY enables the negotiation of any supported management protocol. This objects supercedes the accServiceProfileMlxState object that was previously used to enable MLX negotiation.
GAU accServiceProfileBusyCount	1.3.6.1.4.1.5.1.1.65.1.1.11	Gauge	read-only	The number of internal resources currently bound to this service profile. If the busy count is non-zero, the service profile entry cannot be removed.
STR accServiceProfileConfiguredName	1.3.6.1.4.1.5.1.1.65.2.1.2	DisplayString	read-only	The name of the service profile configured for this physical port.
accServiceProfileEntry	1.3.6.1.4.1.5.1.1.65.1.1		not-accessible	An entry in the Service Profile Table
INT accServiceProfileEntryStatus	1.3.6.1.4.1.5.1.1.65.1.1.10	INTEGER	read-write	The modification status of this service profile entry. Setting the status to add causes a new entry to be added. Setting the status to deleete causes an existing entry to be deleted.
INT accServiceProfileIfIndex	1.3.6.1.4.1.5.1.1.65.2.1.1	INTEGER	read-only	The interface index of the physical port associated with this entry.
STR accServiceProfileLoginPrompt	1.3.6.1.4.1.5.1.1.65.1.1.20	DisplayString	read-write	This is the string that will be displayed when PPP scripting is enabled (sp LOGIN authentication mode) to prompt the user for entry of a username. It will appear after the Welcome Message.
TIK accServiceProfileLoginTimeout	1.3.6.1.4.1.5.1.1.65.1.1.23	TimeTicks	read-write	The duration in seconds that the system will wait for an answer to a login/password prompt. After this timeout, the system will start normal PPP negotiation. Zero disables timer (no timeout).
INT accServiceProfileMlpppMrru	1.3.6.1.4.1.5.1.1.65.1.1.17	INTEGER	read-write	The default maximum reassembly receive unit to negotiate for the Multilink PPP connection using this service profile.
INT accServiceProfileMlxState	1.3.6.1.4.1.5.1.1.65.1.1.18	INTEGER	read-write	The default MLX administrative state for the Multilink PPP connection using this service profile. This object has been obsoleted with release 11.1.
STR accServiceProfileModemPool	1.3.6.1.4.1.5.1.1.65.1.1.9	DisplayString	read-write	The name of the modem pool to use for providing service to switched users connecting via modems. If no modem pool is configured, a default modem pool will be used to provide service.
INT accServiceProfileMsgLevel	1.3.6.1.4.1.5.1.1.65.1.1.4	INTEGER	read-write	The current severity level of trap messages that may be generated regarding events associated with this service profile. Only trap messages whose serverity level is less than or equal to the current setting of this object will be displayed.
STR accServiceProfileName	1.3.6.1.4.1.5.1.1.65.1.1.1	DisplayString	read-only	The name of the service profile. This name serves as the index for accessing information in the Sevice Profile Table. The service profile name is usually acquired from an entry in the Called Number Table.
CTR accServiceProfileNumAccepts	1.3.6.1.4.1.5.1.1.65.1.1.12	Counter	read-only	The number of incoming or outgoing connection requests accepted for this service profile.
GAU accServiceProfileNumActive	1.3.6.1.4.1.5.1.1.65.1.1.14	Gauge	read-only	The current number of connected physical ports using this service profile. Each physical link in a multilink bundle counts as one connection.
INT accServiceProfileNumberGroup	1.3.6.1.4.1.5.1.1.65.1.1.15	INTEGER	read-write	The calling number group to use for incoming call screening. The calling number group is defined in the Calling Number Table. If the calling number group is 0, no incoming call screening is performed for this service profile.
CTR accServiceProfileNumRejects	1.3.6.1.4.1.5.1.1.65.1.1.13	Counter	read-only	The number of incoming or outgoing connection requests rejected for this service profile.
STR accServiceProfilePasswordPrompt	1.3.6.1.4.1.5.1.1.65.1.1.21	DisplayString	read-write	This is the string that will be displayed when PPP scripting is enabled (sp LOGIN authentication mode) to prompt the user for entry of a password. It will appear after the Login Prompt.
accServiceProfilePortEntry	1.3.6.1.4.1.5.1.1.65.2.1		not-accessible	An entry in the Service Profile Port Table
INT accServiceProfilePortLimit	1.3.6.1.4.1.5.1.1.65.1.1.7	INTEGER	read-write	The maximum port limit for this service profile. A value of 1 disables PPP multilink. A value greater than 1 enables multilink negotiation.
accServiceProfilePortTable	1.3.6.1.4.1.5.1.1.65.2		not-accessible	The Service Profile Port Table
INT accServiceProfilePppDefault	1.3.6.1.4.1.5.1.1.65.1.1.5	INTEGER	read-write	The method used to set default PPP parameters. FACTORY indicates that factory defaults will be used or default parameters will be obtained from the usual sources (e.g., preconfigured dial ports). OVERRIDE indicates that default parameters should be overriden using values configured in this service profile. This object has been obsoleted with release 11.1.
INT accServiceProfilePppIpComp	1.3.6.1.4.1.5.1.1.65.1.1.27	INTEGER	read-write	The VJ header compression option for this service profile.
INT accServiceProfilePppMru	1.3.6.1.4.1.5.1.1.65.1.1.16	INTEGER	read-write	The default maximum receive unit to negotiate for the PPP connection using this service profile.
STR accServiceProfileServicePrompt	1.3.6.1.4.1.5.1.1.65.1.1.22	DisplayString	read-write	This is the string that will be displayed when PPP scripting is enabled (sp LOGIN authentication mode) after successful authentication has occurred. It will appear after the password prompt.
accServiceProfileTable	1.3.6.1.4.1.5.1.1.65.1		not-accessible	The Service Profile Table
INT accServiceProfileType	1.3.6.1.4.1.5.1.1.65.1.1.2	INTEGER	read-write	The type of service profile entry. MPBR is normal, multi- protocol bridge/router service. CDNR is partitioned access service via called number routing.
STR accServiceProfileWelcomeMessage	1.3.6.1.4.1.5.1.1.65.1.1.19	DisplayString	read-write	This is the string that will be displayed when PPP scripting is enabled (sp LOGIN authentication mode) to welcome the user. It will appear before the username/login prompt.

RFC description

An SNMP MIB providing management objects for service profile configuration and monitoring in ACC (Avigilon or vendor-specific) systems and equipment.

Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ACC-SERVICEPROFILE

What Is ACC-SERVICEPROFILE?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description