All MIBs › ACC-PING
Category: IP and Core Protocols, Vendor: ACC/Ericsson
Description:
Manages ICMP echo (ping) test operations on ACC/Ericsson routers, providing remote diagnostic capability for testing IP connectivity via SNMP.
Imported Objects
From ACC-MIB
| DisplayString | |
| IfIndex | |
| RowStatus | |
| SmdsAddress | |
| accBRG | OBJECT-IDENTITY |
From ACC-SYSTEM
| accTrapLogSeqNum | OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| OBJECT-TYPE | |
| TimeTicks |
What Is ACC-PING?
ACC-PING is an enterprise MIB for ACC/Ericsson routers that lets an SNMP manager trigger ICMP echo (ping) tests from the router itself and retrieve the results, providing a remote connectivity-diagnostic tool. It exposes control objects to configure and start a ping test (target address, count, size) and result objects reporting round-trip time, packet loss, and completion status. For monitoring, it is used to actively verify IP reachability from the router's perspective, a software-level diagnostic complementing passive interface and uptime monitoring, useful for confirming a remote host or next-hop is actually reachable rather than just assuming from interface state. It has no strong dependency on other MIBs beyond basic SNMP conventions, being a self-contained diagnostic extension. It is deployed on ACC/Ericsson WAN routers where operators need on-demand, router-initiated connectivity tests without shell access to the device. Engineers can download the ACC-PING file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ACC-PING. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- ping test round-trip time
- packet loss count
- test completion status
- ping target reachability
Supported Devices
- ACC/Ericsson WAN router
Monitoring Examples
No object list was provided for this module; based on its description, it would expose a ping-test control table (target address, packet count/size, start trigger) and a corresponding results table (round-trip time, loss count, status). An administrator troubleshooting a remote-site outage would set the target address and start a test, then poll the results objects to see whether packets were lost or replies were delayed, distinguishing a routing problem from a genuinely down remote host.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| accPing | 1.3.6.1.4.1.5.1.1.30 | |||
| IP accPingDest | 1.3.6.1.4.1.5.1.1.30.1 | IpAddress | read-write | IP address of the destination for generated Ping packets. |
| INT accPingReqCnt | 1.3.6.1.4.1.5.1.1.30.2 | INTEGER | read-write | Count of Ping packets left to be generated. Setting this variable to a nonzero value causes the Ping generator to be (re)started. Setting this variable to zero causes the Ping generator to be stopped. |
| INT accPingDataMin | 1.3.6.1.4.1.5.1.1.30.3 | INTEGER | read-write | Minimum number of data bytes included in the Ping packet. The first four bytes of data always carry a timestamp, the remaining data is an incrementing byte data pattern. |
| INT accPingDataMax | 1.3.6.1.4.1.5.1.1.30.4 | INTEGER | read-write | Maximum number of data bytes included in the Ping packet. If this value is greater than accPingDataMin, the data field length of the Ping packet is a random value between accPingDataMin and accPingDataMax. Otherwise the data field length is fixed and specified by accPingDataMin. |
| INT accPingTimeMin | 1.3.6.1.4.1.5.1.1.30.5 | INTEGER | read-write | Time (seconds) to delay before generating the next Ping packet, after correctly receiving the expected Ping response for the previously generated Ping packet. |
| INT accPingTimeMax | 1.3.6.1.4.1.5.1.1.30.6 | INTEGER | read-write | Time (seconds) to wait for a correct Ping response before giving up and generating the next Ping packet. |
| CTR accPingSndPkts | 1.3.6.1.4.1.5.1.1.30.7 | Counter | read-only | Number of Ping packets generated since the current Ping activity was initiated. |
| CTR accPingSndBytes | 1.3.6.1.4.1.5.1.1.30.8 | Counter | read-only | Number of Ping data bytes generated since the current Ping activity was initiated. |
| CTR accPingRcvPkts | 1.3.6.1.4.1.5.1.1.30.9 | Counter | read-only | Number of Ping responses received since the current Ping activity was initiated. |
| CTR accPingRcvBytes | 1.3.6.1.4.1.5.1.1.30.10 | Counter | read-only | Number of Ping data bytes received since the current Ping activity was initiated. |
| CTR accPingRcvOKs | 1.3.6.1.4.1.5.1.1.30.11 | Counter | read-only | Number of correct Ping responses received since the current Ping activity was initiated. |
| CTR accPingRcvBads | 1.3.6.1.4.1.5.1.1.30.12 | Counter | read-only | Number of incorrect Ping responses received since the current Ping activity was initiated. |
| INT accPingDelayMin | 1.3.6.1.4.1.5.1.1.30.13 | INTEGER | read-only | Minimum round trip delay, in milliseconds, experienced by the Ping packet and the Ping response. |
| INT accPingDelayMax | 1.3.6.1.4.1.5.1.1.30.14 | INTEGER | read-only | Maximum round trip delay, in milliseconds, experienced by the Ping packet and the Ping response. |
| INT accPingDelayAvg | 1.3.6.1.4.1.5.1.1.30.15 | INTEGER | read-only | Average round trip delay, in milliseconds, experienced by the Ping packet and the Ping response. |
RFC description
Ping utility management for generating and monitoring ICMP echo requests with configurable packet sizes and delays.
Start monitoring ACC/Ericsson WAN access routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.