All MIBs › AC-CONTROL-MIB
Organization: AudioCodes Ltd
Last Updated: 2009-10-22
Description: AudioCodes MIB for control-plane link keep-alive timers, transport settings, and board-level configuration on AudioCodes VoIP gateways and media servers
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is AC-CONTROL-MIB?
AC-CONTROL-MIB is an AudioCodes enterprise MIB for the control-plane infrastructure of AudioCodes VoIP gateways and media servers, covering keep-alive timers, transport-layer settings, and board-level configuration. It exposes mostly configuration objects describing how the device's signaling/control channel is set up and maintained, rather than rich runtime counters. It still supports monitoring of control-plane software health: the configured keep-alive interval and transport settings determine how quickly the device detects and recovers from a lost heartbeat to its call agent or softswitch. It is typically used in conjunction with AC-SYSTEM-MIB (device identity/reset) and the AC-PM-* performance MIBs to build a complete AudioCodes device picture. It is deployed on AudioCodes Mediant gateways and media servers operating under a call-agent/softswitch control architecture. Engineers can download the AC-CONTROL-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in AC-CONTROL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- AudioCodes VoIP gateway
- AudioCodes media server
Monitoring Examples
An operator checks the control-link keep-alive timer and transport configuration objects to confirm the gateway is set to detect a lost connection to its call agent within an acceptable interval; a keep-alive interval configured too long delays failover detection. Because AC-CONTROL-MIB is largely a configuration module, day-to-day fault detection typically relies on companion trap/alarm objects elsewhere in the AudioCodes MIB set rather than counters within this module itself.
What Can Be Monitored
- control-link keep-alive timer setting
- transport protocol configuration
- board-level configuration parameters
This MIB depends on
Related MIBs
Imported Objects
From AUDIOCODES-TYPES-MIB
| acBoardMibs | OBJECT-IDENTITY |
| acGeneric | OBJECT-IDENTITY |
| acProducts | OBJECT-IDENTITY |
| acRegistrations | OBJECT-IDENTITY |
| audioCodes | OBJECT-IDENTITY |
From RFC1155-SMI
| IpAddress |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| RowPointer | |
| RowStatus | |
| TAddress | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| acControl | 1.3.6.1.4.1.5003.9.10.5 | |||
| acControlConfiguration | 1.3.6.1.4.1.5003.9.10.5.1 | |||
| acControlCommonConfig | 1.3.6.1.4.1.5003.9.10.5.1.1 | |||
| acCPLink | 1.3.6.1.4.1.5003.9.10.5.1.1.1 | |||
| acCPKeepAlive | 1.3.6.1.4.1.5003.9.10.5.1.1.1.1 | |||
| I32 acCPKeepAliveEnabled | 1.3.6.1.4.1.5003.9.10.5.1.1.1.1.1 | Integer32 | read-write | Enables a proprietary keep-alive mechanism, in which a serviceChange is send with UNDEFINED as the termination ID and restart method. 0 = disable >0 = enable. Access: Instant. AC INI-Param: KEEPALIVEENABLED |
| U32 acCPKeepAliveInterval | 1.3.6.1.4.1.5003.9.10.5.1.1.1.1.2 | Unsigned32 | read-write | This parameter is used to define the interval in seconds of a KeepAlive message. Access: Instant. AC INI-Param: KEEPALIVEINTERVAL |
| acCPTransport | 1.3.6.1.4.1.5003.9.10.5.1.1.1.2 | |||
| INT acCPTransportType | 1.3.6.1.4.1.5003.9.10.5.1.1.1.2.1 | INTEGER | read-write | Defines the transport type for the control protocol: 0 = UDP 1 = TCP 2 = SCTP. Access: Offline. AC INI-Param: CPTRANSPORTTYPE |
| I32 acCPTransportRetransmitionTimeOut | 1.3.6.1.4.1.5003.9.10.5.1.1.1.2.2 | Integer32 | read-write | Controls protocols retransmission timeout. Sets the initial time (in msec) for the first retransmission. The retransmission intervals thereafter increase exponentially. Access: Instant. AC INI-Param: MGCPRETRANSMISSIONTIMEOUT |
| U32 acCPTransportControlDiffServ | 1.3.6.1.4.1.5003.9.10.5.1.1.1.2.3 | Unsigned32 | read-write | Defines the value of the field 'DiffServ' in the IP header for control traffic. Range: 0 to 63. Access: Offline. AC INI-Param: CONTROLDIFFSERV |
| acCPTransaction | 1.3.6.1.4.1.5003.9.10.5.1.1.1.3 | |||
| U32 acCPTransactionIDRange | 1.3.6.1.4.1.5003.9.10.5.1.1.1.3.1 | Unsigned32 | read-write | Defines the range for the transaction ID. Default = 999997999. Access: Instant. AC INI-Param: TRANSACTIONIDRANGE |
| U32 acCPTransactionIDBase | 1.3.6.1.4.1.5003.9.10.5.1.1.1.3.2 | Unsigned32 | read-write | Defines the minimum number for the transaction ID. Default = 2000. Access: Instant. AC INI-Param: TRANSACTIONIDBASE |
| INT acCPTransactionRandomizeID | 1.3.6.1.4.1.5003.9.10.5.1.1.1.3.3 | INTEGER | read-write | Defines if the transactions produced by the board start with a fixed or random number. 1 = Randomize On Refer also to the parameters defining Transaction Id Range and Transaction Id Base. Access: Offline. AC INI-Param: RANDOMIZETRANSACTIONID |
| U32 acCPTransactionCommunicationLayerTimeout | 1.3.6.1.4.1.5003.9.10.5.1.1.1.3.4 | Unsigned32 | read-write | Assumed delay of the communication layer. It is used in retransmission. This parameter defines the maximal time to wait for a response before declaring a disconnection (in seconds). Access: Instant. AC INI-Param: MGCPCOMMUNICATIONLAYERTIMEOUT |
| acCPDigitCollect | 1.3.6.1.4.1.5003.9.10.5.1.1.2 | |||
| I32 acCPDigitCollectUseEndOfDTMF | 1.3.6.1.4.1.5003.9.10.5.1.1.2.1 | Integer32 | read-write | Defines if the detection of DTMF events is notified at the end of DTMF or at the start of DTMF. 0 = at start of DTMF 1 = at the end of DTMF. Access: Instant. AC INI-Param: MGCPDTMFDETECTIONPOINT |
| I32 acCPDigitCollectDTMFLength | 1.3.6.1.4.1.5003.9.10.5.1.1.2.2 | Integer32 | read-write | Defines the time to play DTMF (in msec). Range: 0 to 65535. Access: Instant. AC INI-Param: DTMFDIGITLENGTH |
| U32 acCPDigitCollectDTMFInterInterval | 1.3.6.1.4.1.5003.9.10.5.1.1.2.3 | Unsigned32 | read-write | Defines the time between DTMFs played (in msec). Range: 0 to 65535. Access: Instant. AC INI-Param: DTMFINTERDIGITINTERVAL |
| I32 acCPDigitCollectMapTimeOutTimer | 1.3.6.1.4.1.5003.9.10.5.1.1.2.4 | Integer32 | read-write | Defines the timeout value (T symbol) in a digit map, in increments of 10. For MEGACO, it's the start timer. For the others, it's the end timer. When the value is -1, it means the hardcoded value (16000). Access: Instant. AC INI-Param: DIGITMAPTIMEOUTTIMER |
| I32 acCPDigitCollectMapShortTimer | 1.3.6.1.4.1.5003.9.10.5.1.1.2.5 | Integer32 | read-write | Defines the short timer (S Symbol) value in millisecond, in a digit map.This timer is typically activated when the repetition symbol '.' exists. When the value is -1, it means the hardcoded value (3000). Access: Instant. AC INI-Param: cpDIGITMAPSHORTTIMER |
| I32 acCPDigitCollectMapLongTimer | 1.3.6.1.4.1.5003.9.10.5.1.1.2.6 | Integer32 | read-write | Defines the inter-digit long timer (L Symbol) value in millisecond, in a digit map.This timer is typically activated between collected digit when the end of the pattern is not reached yet. When the value is -1, it means the hardcoded value (16000). Access: Instant. AC INI-Param: cpDIGITMAPLONGTIMER |
| acCPDigitMap | 1.3.6.1.4.1.5003.9.10.5.1.1.3 | |||
| STR acCPDigitMapDefaultName | 1.3.6.1.4.1.5003.9.10.5.1.1.3.1 | SnmpAdminString | read-write | Name of the provisioned digit map. Range: String[30]. Access: Offline. AC INI-Param: DIGITMAPNAME |
| STR acCPDigitMapPatterns | 1.3.6.1.4.1.5003.9.10.5.1.1.3.2 | SnmpAdminString | read-write | The digit map patterns separated by a vertical bar (|), as defined in the MEGACO RFC. Range = String[500]. Access: Offline. AC INI-Param: DIGITMAPPING |
| STR acCPDigitMapDialedStringPrefix | 1.3.6.1.4.1.5003.9.10.5.1.1.3.3 | SnmpAdminString | read-write | Defines a prefix to add to the dialed string. Range = String[8]. Access: Instant. AC INI-Param: DialedStringPrefix |
| acCPNaming | 1.3.6.1.4.1.5003.9.10.5.1.1.4 | |||
| STR acCPNamingGateWay | 1.3.6.1.4.1.5003.9.10.5.1.1.4.1 | SnmpAdminString | read-write | Defines the media gateway's identification name. MGCP: Gateway's identification name towards the MGCP Call Agent. If undefined, the gateway name holds the IP address of the device. Range: String[63]. Access: Offline. AC INI-Param: GATEWAYNAME |
| STR acCPNamingEndPoint | 1.3.6.1.4.1.5003.9.10.5.1.1.4.2 | SnmpAdminString | read-write | MGCP: Gateway's endpoint name. This is a prefix used to identify the endpoint, i.e., 'ACgw' in the following example: 'ACgw5@acl.com'. MEGACO: Prefix of the endpoint part of the termination name Range: String[19] Default: MGCP: 'Acgw' MEGACO: 'line' for analog board and '/c' for trunking boards. Access: Offline. AC INI-Param: ENDPOINTNAME |
| STR acCPNamingTrunk | 1.3.6.1.4.1.5003.9.10.5.1.1.4.3 | SnmpAdminString | read-write | (MGCP) This parameter generates (together with the parameter defining the Endpoint Prefix) a local endpoint name on trunk-enabled media gateways. (MEGACO) Prefix of the trunk part of the termination name. Range: String[19] Default: MGCP = ' ' (empty string) MEGACO = ' ' for analog boards and 's' for trunking boards. Access: Offline. AC INI-Param: TRUNKNAME |
| STR acCPNamingEndpointPrefix | 1.3.6.1.4.1.5003.9.10.5.1.1.4.4 | SnmpAdminString | read-write | (MGCP) This parameter generates (together with parameter Trunk Name) a local endpoint name on trunk-enabled media gateways. Range: String[19]. Access: Offline. AC INI-Param: ENDPOINTPREFIX |
| STR acCPNamingCallAgentDomain | 1.3.6.1.4.1.5003.9.10.5.1.1.4.5 | SnmpAdminString | read-write | Defines a domain name to be used to connect with the Call Agent. The parameter takes precedence over the Call Agent IP and the provisioned Call Agent parameters. Range = String[63]. Access: Instant. AC INI-Param: CALLAGENTDOMAINNAME |
| STR acCPNamingCoderTblFileName | 1.3.6.1.4.1.5003.9.10.5.1.1.4.6 | SnmpAdminString | read-write | This parameter defines the name of an external coders table. In this table, the user can decide which coders will be used in the system. The original file is a text file, and it is converted by DCONVERT to a bynary file. Access: Offline. AC INI-Param: CODERTBLFILENAME |
| STR acCPNamingSessionOwner | 1.3.6.1.4.1.5003.9.10.5.1.1.4.7 | SnmpAdminString | read-write | Defines the owner/creator of the session Range = String[31]. Access: Instant. AC INI-Param: CPSDPSESSIONOWNER |
| acCPConference | 1.3.6.1.4.1.5003.9.10.5.1.1.5 | |||
| U32 acCPConferenceMaxUsers | 1.3.6.1.4.1.5003.9.10.5.1.1.5.1 | Unsigned32 | read-write | Defines the maximal number of users to reserve for a new conference. The actual conference size can be more than this, but never less. Range: 3 to 64. Access: Instant. AC INI-Param: CONFERENCEMAXUSERS |
| U32 acCPConferenceMaxSimultaneousSpeakers | 1.3.6.1.4.1.5003.9.10.5.1.1.5.2 | Unsigned32 | read-write | Defines the maximum number of users that can speak simultaneously in a conference. Range: 1 to 3. Access: Instant. AC INI-Param: CONFERENCEMAXSIMULTANEOUSSPEAKERS |
| INT acCPConferenceSignalGenerationEnable | 1.3.6.1.4.1.5003.9.10.5.1.1.5.3 | INTEGER | read-write | Generates a beep when a participant enters or exits the conference. 0 = Do not generate 1 = Generate. Access: Instant. AC INI-Param: CONFERENCESIGNALGENERATIONENABLE |
| acCPMedia | 1.3.6.1.4.1.5003.9.10.5.1.1.6 | |||
| I32 acCPMediaRTCPInterval | 1.3.6.1.4.1.5003.9.10.5.1.1.6.1 | Integer32 | read-write | Defines the time interval between the adjacent RTCP reports (in msec). Range: 0 to 65535. Access: Instant. AC INI-Param: RTCPINTERVAL |
| INT acCPMediaDefaultCoder | 1.3.6.1.4.1.5003.9.10.5.1.1.6.2 | INTEGER | read-write | This parameter can be used to set a default coder for channel opening. For the legal coder names, refer to the product's User Manual. Default = cpDPT_G711Mulaw_Coder. Access: Instant. AC INI-Param: MGCPDEFAULTCODER |
| U32 acCPMediaPacketizationPeriod | 1.3.6.1.4.1.5003.9.10.5.1.1.6.3 | Unsigned32 | read-write | Defines the default packetization period (Frame Size). Default = 20 msec (for G.723 30) Range: 5 to 80. Access: Instant. AC INI-Param: DEFAULTPACKETIZATIONPERIOD |
| INT acCPMediaRecordCoder | 1.3.6.1.4.1.5003.9.10.5.1.1.6.4 | INTEGER | read-write | Determines the coder used for recording to a file. Access: Instant. AC INI-Param: cpRecordCoder |
| INT acCPMediaPlayCoder | 1.3.6.1.4.1.5003.9.10.5.1.1.6.5 | INTEGER | read-write | Determines the coder type to be used when playing a file of type .raw. Access: Instant. AC INI-Param: cpPlayCoder |
| STR acCPMediaDefaultRealmName | 1.3.6.1.4.1.5003.9.10.5.1.1.6.6 | SnmpAdminString | read-write | By default, the default CP media realm is the first realm appearing in the CP media realm table. The parameter enables the user to set any of the realms appearing in the table as the default realm. Access: Offline. AC INI-Param: cpDefaultMediaRealmName |
| INT acCPMediaDspAllocationMethod | 1.3.6.1.4.1.5003.9.10.5.1.1.6.7 | INTEGER | read-write | determines dsp allocation method in IP to IP call. If this parameter is set to DISABLE_SINGLE_DSP_ALLOCATION (0) , then two IP terminations with the same configuration will not allocate DSPs at all and two terminations with different configuration will cause an allocation of 2 DSPs. If this parameteris set to ENABLE_SINGLE_DSP_ALLOCATION (1), then two IP terminations with the same configuration will not allocate DSPs at all, transcoding with allocation of one DSP will be used if possible, and two terminations with different configuration will cause allocation of 2 DSPs. If this parameter is set to ENFORCE_FULL_DSP_ALLOCATION (2) then two IP terminations with any configuration will cause allocation of two DSPs. Access: Instant. AC INI-Param: CPMEDIARESOURCEOPTIMIZATION |
| acCPMediaRealmTable | 1.3.6.1.4.1.5003.9.10.5.1.1.6.21 | not-accessible | Control Protocol media realm configuration table. | |
| acCPMediaRealmEntry | 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1 | not-accessible | ||
| U32 acCPMediaRealmIndex | 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.1 | Unsigned32 | not-accessible | Index Field for line. Internal parameter. AC INI-Param: CpMediaRealm_Index |
| ROW acCPMediaRealmRowStatus | 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.2 | RowStatus | read-create | ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A |
| INT acCPMediaRealmAction | 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.3 | INTEGER | read-create | Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A |
| INT acCPMediaRealmActionRes | 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.4 | INTEGER | read-only | Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A |
| STR acCPMediaRealmName | 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.5 | SnmpAdminString | read-create | A string representing the name of the media realm. Access: Offline. AC INI-Param: CpMediaRealm_MediaRealmName |
| STR acCPMediaRealmIPv4If | 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.6 | SnmpAdminString | read-create | The IPv4 interface name corresponding to the one appearing in the interface table. Access: Offline. AC INI-Param: CpMediaRealm_IPv4IF |
| STR acCPMediaRealmIPv6If | 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.7 | SnmpAdminString | read-create | The IPv6 interface name corresponding to the one appearing in the interface table. Access: Offline. AC INI-Param: CpMediaRealm_IPv6IF |
| I32 acCPMediaRealmPortRangeStart | 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.8 | Integer32 | read-create | The starting port for the range of media ports. Access: Offline. AC INI-Param: CpMediaRealm_PortRangeStart |
| I32 acCPMediaRealmMediaSessionLeg | 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.9 | Integer32 | read-create | The number of media sessions associated with the range of ports. Access: Offline. AC INI-Param: CpMediaRealm_MediaSessionLeg |
| I32 acCPMediaRealmPortRangeEnd | 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.10 | Integer32 | read-only | The ending port for the range of media ports. AC INI-Param: CpMediaRealm_PortRangeEnd |
| acCPMisc | 1.3.6.1.4.1.5003.9.10.5.1.1.7 | |||
| I32 acCPMiscDialToneDuration | 1.3.6.1.4.1.5003.9.10.5.1.1.7.1 | Integer32 | read-write | Defines the timeout (in seconds) for the dial tone signal. Range: 1 to 65535. Access: Instant. AC INI-Param: DIALTONEDURATION |
| U32 acCPMiscTrunkIDOffset | 1.3.6.1.4.1.5003.9.10.5.1.1.7.2 | Unsigned32 | read-write | Sets the offset to the trunk numbering. e.g., Offset = 2 causes the first trunk number to be 2. Note: This parameter was replaced by the parameter 'EP_NUM'. Range: 0 to 4294967295. Access: Offline. AC INI-Param: MEGACOTRUNKIDOFFSET |
| U32 acCPMiscCompatibilityProfile | 1.3.6.1.4.1.5003.9.10.5.1.1.7.3 | Unsigned32 | read-write | ControlS MGCP/MEGACO functioning for vendor-specific compatibility. Refer to the product's User's Manual. Range: Integer > 0 Refer to the product's User's Manual or the enumerator mgTMGCPProfile for possible values. Access: Offline. AC INI-Param: MGCPCOMPATIBILITYPROFILE |
| U32 acCPMiscSDPProfile | 1.3.6.1.4.1.5003.9.10.5.1.1.7.4 | Unsigned32 | read-write | Controls MGCP/MEGACO functioning for SDP negotiation. The parameter is bitwise. Every new RFC support should be turned on or off with this parameter. Each bit function is described in the control protocol chapter. Access: Instant. AC INI-Param: CPSDPPROFILE |
| acCPVxml | 1.3.6.1.4.1.5003.9.10.5.1.1.8 | |||
| INT acCPVxmlEnableVXML | 1.3.6.1.4.1.5003.9.10.5.1.1.8.1 | INTEGER | read-write | Enables/disables the VXML stack. 0=Disable 1=Enable. Access: Offline. AC INI-Param: EnableVXML |
| acProvisionedCallAgent | 1.3.6.1.4.1.5003.9.10.5.1.2 | |||
| acProvisionedCallAgentTable | 1.3.6.1.4.1.5003.9.10.5.1.2.1 | not-accessible | Magaco Call agents Table.;The table defines the IP and port of each call agent.;The Row Status in this table is currently degenerated. It is permanently set to 'active(1)'. Also, changing other values in the table can be done freely (no need to set the Row Status to other values). | |
| acProvisionedCallAgentEntry | 1.3.6.1.4.1.5003.9.10.5.1.2.1.1 | not-accessible | ||
| U32 acProvisionedCallAgentRowStatus | 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.1 | Unsigned32 | read-write | Provisioned call agent table row-status. AC INI-Param: N/A |
| U32 acProvisionedCallAgentAction | 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.2 | Unsigned32 | read-write | Provisioned call agent table action. AC INI-Param: N/A |
| U32 acProvisionedCallAgentActionResult | 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.3 | Unsigned32 | read-only | Provisioned call agent table result. AC INI-Param: N/A |
| U32 acProvisionedCallAgentIndex | 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.4 | Unsigned32 | read-only | Megaco Call Agent Id. AC INI-Param: N/A |
| STR acProvisionedCallAgentIp | 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.5 | SnmpAdminString | read-write | Use this parameter to define a list of up to 10 legal IP addresses separated by ',' or ';' for the ServiceChange command. The gateway starts connecting with the first and in case of failure, attempts the others. Access: Offline. AC INI-Param: PROVISIONEDCALLAGENTS |
| U32 acProvisionedCallAgentPort | 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.6 | Unsigned32 | read-write | Use this parameter to define a list of up to 10 Call Agent UDP ports separated by , or ; for each Call Agent defined by the parameter used to specify the Allowed Call Agent Address. Access: Offline. AC INI-Param: PROVISIONEDCALLAGENTSPORTS |
| acCallManagerGroupsTable | 1.3.6.1.4.1.5003.9.10.5.1.2.2 | not-accessible | List the trunks in the group. Comma and range can be used | |
| acCallManagerGroupsEntry | 1.3.6.1.4.1.5003.9.10.5.1.2.2.1 | not-accessible | ||
| U32 acCallManagerGroupsIndex | 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.1 | Unsigned32 | read-only | Call Manager Groups index. AC INI-Param: CPCallManagerGroups_Index |
| ROW acCallManagerGroupsRowStatus | 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.2 | RowStatus | read-create | Call Manager Groups table row-status. AC INI-Param: CPCallManagerGroups_RowStatus |
| U32 acCallManagerGroupsAction | 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.3 | Unsigned32 | read-create | Call Manager Groups table action. AC INI-Param: CPCallManagerGroups_Action |
| U32 acCallManagerGroupsActionResult | 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.4 | Unsigned32 | read-only | Call Manager Groups table result. AC INI-Param: CPCallManagerGroups_ActionRes |
| STR acCallManagerGroupsList | 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.5 | SnmpAdminString | read-create | List the trunks in the group. Comma and range can be used. Access: Offline. AC INI-Param: CPCallManagerGroups_GroupMembersList |
| INT acCallManagerGroupsMGCType | 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.6 | INTEGER | read-create | 0- IP4 CA, 1- DNS (MGCPCallAgentDomainName). Access: Offline. AC INI-Param: CPCallManagerGroups_MGCType |
| U32 acCallManagerGroupsPrimaryMGCIndx | 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.7 | Unsigned32 | read-create | Index of primary MGC in the call agents list. The value 0 means there is no IP. Access: Offline. AC INI-Param: CPCallManagerGroups_PrimaryMGCIndx |
| U32 acCallManagerGroupsSecondaryMGCIndx | 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.8 | Unsigned32 | read-create | Index of secondary MGC in the call agents list. If none - set to 10. Access: Offline. AC INI-Param: CPCallManagerGroups_SecondaryMGCIndx |
| acMGCPConfig | 1.3.6.1.4.1.5003.9.10.5.1.3 | |||
| acMGCallAgent | 1.3.6.1.4.1.5003.9.10.5.1.3.1 | |||
| IP acMGCallAgentIP | 1.3.6.1.4.1.5003.9.10.5.1.3.1.1 | IpAddress | read-write | The Call Agent IP address, in dotted notation, to be used for the initial Restart in Progress (RSIP) message. Set to 0.0.0.0 to avoid sending RSIP. This parameter overrides the BootP server's Call Agent IP address, if provided. Range: Legal IP address. Access: Offline. AC INI-Param: CALLAGENTIP |
| U32 acMGCallAgentPort | 1.3.6.1.4.1.5003.9.10.5.1.3.1.2 | Unsigned32 | read-write | Defines the Call Agent port number. Defaults to the MGCP default port number of 2427. Range: 0 to 65534. Access: Offline. AC INI-Param: CALLAGENTPORT |
| IP acMGCallAgentRedundantIP | 1.3.6.1.4.1.5003.9.10.5.1.3.1.3 | IpAddress | read-write | Defines the redundant Call Agent IP address to be used for the initial Restart in Progress message (RSIP). Set to 0.0.0.0 to avoid sending RSIP. Range = IP address in dotted format notation. Access: Offline. AC INI-Param: REDUNDANTAGENTIP |
| U32 acMGCallAgentRedundantPort | 1.3.6.1.4.1.5003.9.10.5.1.3.1.4 | Unsigned32 | read-write | Defines the redundant Call Agent port number. Defaults to the MGCP default port number of 2427. Access: Offline. AC INI-Param: REDUNDANTAGENTPORT |
| STR acMGCallAgentRedundantDomainName | 1.3.6.1.4.1.5003.9.10.5.1.3.1.5 | SnmpAdminString | read-write | Defines the redundant MGCP Call Agent domain name. Range = String[63] Default = ' ' (empty string). Access: Instant. AC INI-Param: REDUNDANTCALLAGENTDOMAINNAME |
| acMGCommunication | 1.3.6.1.4.1.5003.9.10.5.1.3.2 | |||
| U32 acMGCommunicationConnectionIDBase | 1.3.6.1.4.1.5003.9.10.5.1.3.2.1 | Unsigned32 | read-write | Defines the lowest number for the Connection ID values assigned by the media gateway. Access: Offline. AC INI-Param: CONNECTIONIDBASE |
| U32 acMGCommunicationConnectionIDRange | 1.3.6.1.4.1.5003.9.10.5.1.3.2.2 | Unsigned32 | read-write | Defines the range for the Connection ID values assigned by the gateway. Default = 999999999. Access: Offline. AC INI-Param: CONNECTIONIDRANGE |
| I32 acMGCommunicationGateWayPort | 1.3.6.1.4.1.5003.9.10.5.1.3.2.3 | Integer32 | read-write | Users can use this parameter to force the media gateway to listen to another UDP port instead of to the original 2427, as defined in RFC 2705. Range = 0 to 65535. Access: Offline. AC INI-Param: GATEWAYMGCPPORT |
| acMGMisc | 1.3.6.1.4.1.5003.9.10.5.1.3.3 | |||
| INT acMGMiscDigitmapMismatchNotification | 1.3.6.1.4.1.5003.9.10.5.1.3.3.1 | INTEGER | read-write | The MGCP standard defines that if a number does not match the digitmap definition, a notification is not sent. One of the following values: 1 = Send mismatch notification a digital mismatch notification is sent or 0 = Do NOT send mismatch notification a digital mismatch notification is not sent. In the same way, you can enable MGCP to send notifications upon matching digitmap. Access: Instant. AC INI-Param: MGCPSendDigitmapMismatchNotification |
| INT acMGMiscPiggyBackingEnable | 1.3.6.1.4.1.5003.9.10.5.1.3.3.2 | INTEGER | read-write | This parameter configures the option to send piggy backed commands while RSIPS are sent. For example, if the event is triggered by the board and RSIP was not sent yet, RSIP will be sent and piggy back the event along with it, the call manager will face endpoint restart and than the event. Default = 1 (piggy back on) 0 = commands sent by gateway will not be piggy backed. 1 = commands sent by gateway will be piggy backed. . Access: Offline. AC INI-Param: EnablePiggyBacking |
| INT acMGMiscUseWildCardWithRSIP | 1.3.6.1.4.1.5003.9.10.5.1.3.3.3 | INTEGER | read-write | When wildcard is used RSIPs turn in a single message on EndPoint Naming configuration and Single message for each trunk in Trunk Naming configuration. If Off and number of channels is less than 64 RSIP message sent for each Endpoint. 0 = Do not use 1 = Use. Access: Offline. AC INI-Param: UseWildCardWithRSIP |
| acMGNamePattern | 1.3.6.1.4.1.5003.9.10.5.1.3.4 | |||
| STR acMGNamePatternEndpoint | 1.3.6.1.4.1.5003.9.10.5.1.3.4.1 | SnmpAdminString | read-write | Defines the endpoint naming pattern for a gateway. The �*� signs will be replaced with an actual endpoint number or with a wild-card sign. The string will contain up to 63 characters. Default value will be �ACgw*�. . Access: Offline. AC INI-Param: MGCPEndpointNamingPattern |
| STR acMGNamePatternTrunk | 1.3.6.1.4.1.5003.9.10.5.1.3.4.2 | SnmpAdminString | read-write | Defines the trunk and B-channel naming pattern used by the gateway. The �*� signs will be replaced with a trunk or B-channel number or with a wild-card sign. The string will contain up to 63 characters. Default value will be �ds*/tr*�. . Access: Offline. AC INI-Param: MGCPTrunkNamingPattern |
| acMegacoConfig | 1.3.6.1.4.1.5003.9.10.5.1.4 | |||
| acMCLink | 1.3.6.1.4.1.5003.9.10.5.1.4.1 | |||
| acMCCommunication | 1.3.6.1.4.1.5003.9.10.5.1.4.1.1 | |||
| INT acMCCommunicationCheckLegalityOfMGC | 1.3.6.1.4.1.5003.9.10.5.1.4.1.1.1 | INTEGER | read-write | This parameter specifies if MEGACO rejects commands from an MGC not in the provisioned list. 0 = Don't reject unknown MGCs 1 = Reject unknown MGC. Access: Instant. AC INI-Param: MEGACOCHECKLEGALITYOFMGC |
| STR acMCCommunicationGateWayMID | 1.3.6.1.4.1.5003.9.10.5.1.4.1.1.2 | SnmpAdminString | read-write | Defines the media gateway's MID towards the MEGACO Call Agent. If empty or illegal, the MID holds the IP address of the board. Range: String[64]. Access: Offline. AC INI-Param: MEGACO_MID |
| STR acMCCommunicationServiceChangeProfile | 1.3.6.1.4.1.5003.9.10.5.1.4.1.1.3 | SnmpAdminString | read-write | Specifies the Profile that will be displayed in the MEGACO serviceChange command. At this stage, the profile will not determine the features supported. Range = String[63]. Access: Offline. AC INI-Param: CPSERVICECHANGEPROFILE |
| acMCCommunicationTimer | 1.3.6.1.4.1.5003.9.10.5.1.4.1.2 | |||
| U32 acMCCommunicationTimerMGProvisionalResponse | 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.1 | Unsigned32 | read-write | Defines the provisional response timer for the media gateway (in msec). Range: 0 to 20000. Access: Instant. AC INI-Param: MGPROVISIONALRESPONSETIME |
| U32 acMCCommunicationTimerMGCProvisionalResponse | 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.2 | Unsigned32 | read-write | Defines the provisional response timer for the MGC (in msec). Range: 0 to 20000. Access: Instant. AC INI-Param: MGCPROVISIONALRESPONSETIME |
| U32 acMCCommunicationTimerMGExecutionTime | 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.3 | Unsigned32 | read-write | Defines the estimated execution time of the media gateway (in msec). Range: 0 to 2000. Access: Instant. AC INI-Param: MGEXECUTIONTIME |
| U32 acMCCommunicationTimerMGCExecutionTime | 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.4 | Unsigned32 | read-write | Defines the estimated execution time of the MGC (in msec). Range: 0 to 2000. Access: Instant. AC INI-Param: MGCEXECUTIONTIME |
| U32 acMCCommunicationTimerHangTermTimeout | 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.5 | Unsigned32 | read-write | Default timeout (in seconds) for sending Hanging Termination event, when a request for Hanging Termination is sent without parameters. Range - 0 -65535. Access: Instant. AC INI-Param: MEGACOHangTermTimeout |
| U32 acMCCommunicationTimerRestartMaxWaitingDelay | 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.6 | Unsigned32 | read-write | Defines the Maximum Waiting Delay (in milliseconds) before restart service change when the Media Gateway is powered on. Access: Instant. AC INI-Param: RestartMaximumWaitingDelay |
| U32 acMCCommunicationTimerTargetMgResponseTime | 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.7 | Unsigned32 | read-write | The response time is defined as the time from the arrival of a call set-up request until the response (in msec). Range = 100-1000 in resolutions of 50 (i.e. 100, 150, 200, 250...). Access: Instant. AC INI-Param: TargetMG_ResponseTime |
| acMCNaming | 1.3.6.1.4.1.5003.9.10.5.1.4.2 | |||
| acMCNamePattern | 1.3.6.1.4.1.5003.9.10.5.1.4.2.1 | |||
| STR acMCNamePatternPhys | 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.1 | SnmpAdminString | read-write | Defines the name pattern of a physical termination. For Example: 'tgw/t*/c*'. The '*' sign stands for the actual numbers of the trunk and bchannel. Range: String [30]. Access: Offline. AC INI-Param: PHYSTERMNAMEPATTERN |
| STR acMCNamePatternLogicalRTP | 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.2 | SnmpAdminString | read-write | Defines the name pattern of an RTP termination. For example: 'gw/rtp/*'. The '*' sign stands for the actual number of the RTP termination. Range: String [30]. Access: Offline. AC INI-Param: LOGICALRTPTERMPATTERN |
| STR acMCNamePatternLogicalATM | 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.3 | SnmpAdminString | read-write | Defines the name pattern of an ATM termination. Range: String [30]. Access: Offline. AC INI-Param: LOGICALATMTERMPATTERN |
| STR acMCNamePatternConf | 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.4 | SnmpAdminString | read-write | Defines the name pattern of a conference termination. Applicable to IPM-1610 and TP-6310 only. Range: String[32]. Access: Offline. AC INI-Param: CONFERENCETERMPATTERN |
| STR acMCNamePatternBCTN | 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.5 | SnmpAdminString | read-write | Defines the name pattern of a BCT termination. Applicable to IPM-1610 and TP-6310 only. Range: String[32]. Access: Offline. AC INI-Param: BCTTERMPATTERN |
| STR acMCNamePatternAudio | 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.6 | SnmpAdminString | read-write | Defines the name pattern of an audio termination. Applicable to IPM-1610 and TP-6310 only. Range: String[32]. Access: Offline. AC INI-Param: AUDIOTERMPATTERN |
| STR acMCNamePatternTrunkTest | 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.7 | SnmpAdminString | read-write | Defines the name pattern of a trunk test termination. Applicable to IPM-1610 and TP-6310 only. Range: String[32]. Access: Offline. AC INI-Param: TRUNKTESTTERMPATTERN |
| acMCNameNumber | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2 | |||
| U32 acMCNameNumberEphemeralIDOffset | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.1 | Unsigned32 | read-write | Offset for the ephemeral termination IDs in the gateway. e.g., offset = 100 causes the first ephemeral termination ID to be 101. Note: This parameter was replaced by the parameter 'RTP_Num'. Range = 0 to 4294967295. Access: Instant. AC INI-Param: MEGACOTERMINATIONIDOFFSET |
| acMCNameNumberPhysicalEndpointTable | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21 | not-accessible | Magaco physical endpoint's numbering Table.;The table defines per level (e.g. trunk and channel) the numbering starting point and range.;The Row Status in this table is currently degenerated. It is permanently set to 'active(1)'. Also, changing other values in the table can be done freely (no need to set the Row Status to other values). | |
| acMCNameNumberPhysicalEndpointEntry | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1 | not-accessible | ||
| U32 acMCNameNumberPhysicalEndpointRowStatus | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.1 | Unsigned32 | read-write | Physical endpoint table row-status. AC INI-Param: N/A |
| U32 acMCNameNumberPhysicalEndpointAction | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.2 | Unsigned32 | read-write | Physical endpoint table action. AC INI-Param: N/A |
| U32 acMCNameNumberPhysicalEndpointActionResult | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.3 | Unsigned32 | read-only | Physical endpoint table result. AC INI-Param: N/A |
| U32 acMCNameNumberPhysicalEndpointIndex | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.4 | Unsigned32 | read-only | Index for table use. AC INI-Param: N/A |
| I32 acMCNameNumberPhysicalEndpointStart | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.5 | Integer32 | read-write | Defines the starting number for each name level (level 0 is the left one when looking at the parameter defining Phys Term Name Pattern). Thus, to start trunk numbering from 1, set EP_NUM_0 to 1. Range: Any positive number. Access: Offline. AC INI-Param: EP_NUM |
| U32 acMCNameNumberPhysicalEndpointMin | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.6 | Unsigned32 | read-write | Defines the minimum number for each name level (level 0 is the left one, i.e., the trunk number). Access: Offline. AC INI-Param: EP_MIN |
| U32 acMCNameNumberPhysicalEndpointMax | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.7 | Unsigned32 | read-write | Defines the maximum number for each name level (level 0 is the left one, i.e., the trunk number). Access: Offline. AC INI-Param: EP_MAX |
| acMCNameNumberStreamEndpointTable | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22 | not-accessible | Magaco stream endpoint's numbering Table.;The table defines per level the numbering starting point and range.;The Row Status in this table is currently degenerated. It is permanently set to 'active(1)'. Also, changing other values in the table can be done freely (no need to set the Row Status to other values). | |
| acMCNameNumberStreamEndpointEntry | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1 | not-accessible | ||
| U32 acMCNameNumberStreamEndpointRowStatus | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.1 | Unsigned32 | read-write | Stream endpoint table row-status. AC INI-Param: N/A |
| U32 acMCNameNumberStreamEndpointAction | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.2 | Unsigned32 | read-write | Stream endpoint table action. AC INI-Param: N/A |
| U32 acMCNameNumberStreamEndpointActionResult | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.3 | Unsigned32 | read-only | Stream endpoint table result. AC INI-Param: N/A |
| U32 acMCNameNumberStreamEndpointIndex | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.4 | Unsigned32 | read-only | Index for table use. AC INI-Param: N/A |
| I32 acMCNameNumberStreamEndpointRTPStart | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.5 | Integer32 | read-write | Defines the starting number for each name's RTP termination level. Access: Instant. AC INI-Param: RTP_NUM |
| I32 acMCNameNumberStreamEndpointATMStart | 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.6 | Integer32 | read-write | Defines the starting number for each ATM termination level name. Range: Any positive number. Access: Instant. AC INI-Param: ATM_NUM |
| acMCPoolSize | 1.3.6.1.4.1.5003.9.10.5.1.4.3 | |||
| U32 acMCPoolSizeProvisionedConf | 1.3.6.1.4.1.5003.9.10.5.1.4.3.1 | Unsigned32 | read-write | Provisioned conference size indicated by parameter X-PtEngr. Applicable to IPM-1610 and TP-6310 only. The value is dynamically limited according to the number of DSP channels and the used feature key. Range: 1 to 65535. Access: Instant. AC INI-Param: MEGACOPROVISIONEDCONFSIZE |
| U32 acMCPoolSizeProvisionedBCT | 1.3.6.1.4.1.5003.9.10.5.1.4.3.2 | Unsigned32 | read-write | Provisioned BCT size indicated by parameter X-PtEngr. Applicable to IPM-1610 and TP-6310 only. Range: 1 to 65535. Access: Instant. AC INI-Param: MEGACOPROVISIONEDBCTSIZE |
| U32 acMCPoolSizeProvisionedAudio | 1.3.6.1.4.1.5003.9.10.5.1.4.3.3 | Unsigned32 | read-write | Defines the provisioned audio size indicated by parameter X-PtEngr. Applicable to IPM-1610 and TP-6310 only. Range: 1 to 65535. Access: Instant. AC INI-Param: MEGACOPROVISIONEDAUDIOSIZE |
| U32 acMCPoolSizeNumOfTestTrunkPorts | 1.3.6.1.4.1.5003.9.10.5.1.4.3.4 | Unsigned32 | read-write | Defines the provisioned TT (trunk testing) size indicated by the parameter X-PtEngr. Applicable to IPM-1610 and TP-6310 only. Range: 1 to 65535. Access: Instant. AC INI-Param: MEGACOPROVISIONEDTRUNKTESTINGSIZE |
| acMCProfile | 1.3.6.1.4.1.5003.9.10.5.1.4.4 | |||
| U32 acMCProfileBinary | 1.3.6.1.4.1.5003.9.10.5.1.4.4.1 | Unsigned32 | read-write | Used to profile the binary ASN.1 encoding. Range: Integer >0 Refer to the product's User's Manual for possible values. Access: Instant. AC INI-Param: MEGACOASN1PROFILE |
| INT acMCProfileAASPackages | 1.3.6.1.4.1.5003.9.10.5.1.4.4.2 | INTEGER | read-write | Selects the profile for the Advanced Audio Syntax specification. 0 = TD-51 standard 1 = H.248.9 standard 2 = MGCP Packet Cable 3 = SIP MSCML. Access: Offline. AC INI-Param: AASPACKAGESPROFILE |
| INT acMCProfileTdmHairPinningMode | 1.3.6.1.4.1.5003.9.10.5.1.4.4.3 | INTEGER | read-write | determinewhich Hair-pinning mode is to be used: mode 0 - will create TDM to TDM connection through IP software Loopback mode 1 - will create �pure� hair-pinning i.e. TDM to TDM connection through PSTN . Access: Offline. AC INI-Param: MegacoTdmHairPinningMode |
| acMCMisc | 1.3.6.1.4.1.5003.9.10.5.1.4.5 | |||
| INT acMCMiscEncodingMethod | 1.3.6.1.4.1.5003.9.10.5.1.4.5.1 | INTEGER | read-write | Sets the MEGACO coding method. 0 = Text mode. Access: Offline. AC INI-Param: MEGACOENCODING |
| U32 acMCMiscContextIDOffset | 1.3.6.1.4.1.5003.9.10.5.1.4.5.2 | Unsigned32 | read-write | Offset for the context ID generated by the gateway. e.g., offset = 100 causes the first context to be 101. Range = 0 to 4294967295. Access: Instant. AC INI-Param: MEGACOCONTEXTIDOFFSET |
| INT acMCMiscDisconnectBehavior | 1.3.6.1.4.1.5003.9.10.5.1.4.5.3 | INTEGER | read-write | Determines PBX behavior upon losing connectivity with H.248 Call agent or TPNCP. 1 = No Action - keep routing traffic 2 = Disable Trunks - stop routing trafic BUT RTP remains active 3 = Reset Board - Stop all. Access: Offline. AC INI-Param: DisconnectBehavior |
| STR acMCMiscMegacoVersion | 1.3.6.1.4.1.5003.9.10.5.1.4.5.4 | SnmpAdminString | read-write | Determines the maximum Megaco Version number that is supported by the device. Access: Offline. AC INI-Param: MegacoVersion |
| acMCAMS | 1.3.6.1.4.1.5003.9.10.5.1.4.6 | |||
| U32 acMCAMSNumOfConferencePorts | 1.3.6.1.4.1.5003.9.10.5.1.4.6.1 | Unsigned32 | read-write | Number Of Conference ports.� How many ports on the TPM are allocated to the conferencing service. Access: Instant. AC INI-Param: MEGACOPROVISIONEDCONFSIZE |
| U32 acMCAMSNumOfTestTrunkPorts | 1.3.6.1.4.1.5003.9.10.5.1.4.6.2 | Unsigned32 | read-write | Number Of Test Trunk ports.� How many ports on the TPM are allocated to the Test Trunk service. Access: Instant. AC INI-Param: MEGACOPROVISIONEDTRUNKTESTINGSIZE |
| U32 acMCAMSNumOfLawfulInterceptPorts | 1.3.6.1.4.1.5003.9.10.5.1.4.6.3 | Unsigned32 | read-write | Number Of Test Trunk ports.� How many ports on the TPM are allocated to the Lawful Intercept service. Access: Instant. AC INI-Param: MEGACOPROVISIONEDBCTSIZE |
| U32 acMCAMSNumOfAnnouncementPorts | 1.3.6.1.4.1.5003.9.10.5.1.4.6.4 | Unsigned32 | read-write | Number Of Test Trunk ports.� How many ports on the TPM are allocated to the Announcement service. Access: Instant. AC INI-Param: MEGACOPROVISIONEDAUDIOSIZE |
| acLocalSwitching | 1.3.6.1.4.1.5003.9.10.5.1.5 | |||
| acLocalSwitchingTable | 1.3.6.1.4.1.5003.9.10.5.1.5.1 | not-accessible | Local Switching definitions for analog ports | |
| acLocalSwitchingEntry | 1.3.6.1.4.1.5003.9.10.5.1.5.1.1 | not-accessible | ||
| U32 acLocalSwitchingIndex | 1.3.6.1.4.1.5003.9.10.5.1.5.1.1.1 | Unsigned32 | not-accessible | AC INI-Param: LocalSwitchingPorts_Index |
| ROW acLocalSwitchingRowStatus | 1.3.6.1.4.1.5003.9.10.5.1.5.1.1.2 | RowStatus | read-create | AC INI-Param: LocalSwitchingPorts_RowStatus |
| U32 acLocalSwitchingPhoneNumber | 1.3.6.1.4.1.5003.9.10.5.1.5.1.1.3 | Unsigned32 | read-create | Local Switching definitions for analog ports. Access: Offline. AC INI-Param: LocalSwitchingPorts_PhoneNumber |
| acControlStatus | 1.3.6.1.4.1.5003.9.10.5.2 | |||
| acActiveCallAgent | 1.3.6.1.4.1.5003.9.10.5.2.1 | |||
| STR acActiveCallAgentIp | 1.3.6.1.4.1.5003.9.10.5.2.1.1 | SnmpAdminString | read-only | Megaco Active Call Agent. AC INI-Param: N/A |
| U32 acActiveCallAgentPort | 1.3.6.1.4.1.5003.9.10.5.2.1.2 | Unsigned32 | read-only | Megaco Active Port. AC INI-Param: N/A |
| acCurrentCalls | 1.3.6.1.4.1.5003.9.10.5.2.2 | |||
| acCallInfo | 1.3.6.1.4.1.5003.9.10.5.2.2.1 | |||
| acCallInfoTable | 1.3.6.1.4.1.5003.9.10.5.2.2.1.1 | not-accessible | ||
| acCallInfoEntry | 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1 | not-accessible | ||
| U32 acCallInfoCallIndex | 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.1 | Unsigned32 | not-accessible | The Index of a call. AC INI-Param: N/A |
| STR acCallInfoCallId | 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.2 | SnmpAdminString | read-only | Describes the Call ID in the control protocol.For mgcp, string, For megaco asci. AC INI-Param: N/A |
| INT acCallInfoMediaType | 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.3 | INTEGER | read-only | The type of the media transforming. AC INI-Param: N/A |
| INT acCallInfoControlProtocol | 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.4 | INTEGER | read-only | The name of the control protocol active now. AC INI-Param: N/A |
| U32 acCallInfoDuration | 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.5 | Unsigned32 | read-only | the duration of a call from the momet it started. AC INI-Param: N/A |
| acCallHierarchy | 1.3.6.1.4.1.5003.9.10.5.2.2.2 | |||
| acCallHierarchyTable | 1.3.6.1.4.1.5003.9.10.5.2.2.2.1 | not-accessible | ||
| acCallHierarchyEntry | 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1 | not-accessible | ||
| I32 acCallHierarchyCallIndex | 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.1 | Integer32 | not-accessible | The Index of a call. AC INI-Param: N/A |
| INT acCallHierarchyLegType | 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.2 | INTEGER | not-accessible | Describes the Type of an end poit. AC INI-Param: N/A |
| I32 acCallHierarchyLegID | 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.3 | Integer32 | not-accessible | Describes the end point of a call by index. AC INI-Param: N/A |
| NUM acCallHierarchyRowPointer | 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.4 | RowPointer | read-only | A pointer to the right instance in the current Leg table. AC INI-Param: N/A |
| acMegacoStatus | 1.3.6.1.4.1.5003.9.10.5.2.3 | |||
| U32 acMegacoStatusCurrentVersion | 1.3.6.1.4.1.5003.9.10.5.2.3.1 | Unsigned32 | read-only | The Megaco version currently being used. AC INI-Param: N/A |
RFC description
AudioCodes gateway control platform configuration with keep-alive mechanism and CP link management.
Start monitoring AudioCodes Mediant-series gateways/media servers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.