All MIBs › AC-CONTROL-MIB › acCPMediaDspAllocationMethod
acCPMediaDspAllocationMethod
Module: AC-CONTROL-MIB
OID (symbolic): AC-CONTROL-MIB::acCPMediaDspAllocationMethod
OID (numeric): 1.3.6.1.4.1.5003.9.10.5.1.1.6.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: determines dsp allocation method in IP to IP call. If this parameter is set to DISABLE_SINGLE_DSP_ALLOCATION (0) , then two IP terminations with the same configuration will not allocate DSPs at all and two terminations with different configuration will cause an allocation of 2 DSPs.
If this parameteris set to ENABLE_SINGLE_DSP_ALLOCATION (1), then two IP terminations with the same configuration will not allocate DSPs at all, transcoding with allocation of one DSP will be used if possible, and two terminations with different configuration will cause allocation of 2 DSPs.
If this parameter is set to ENFORCE_FULL_DSP_ALLOCATION (2) then two IP terminations with any configuration will cause allocation of two DSPs. Access: Instant. AC INI-Param: CPMEDIARESOURCEOPTIMIZATION
What is acCPMediaDspAllocationMethod?
This OID chooses whether DSP (Digital Signal Processor) resources are allocated for IP-to-IP calls with matching codec configurations. When set to 0 (disable single), two identical calls skip DSP allocation (pass-through); when set to 1 (enable), transcoding with one DSP is preferred. This optimizes hardware utilization for large call volumes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.5.1.1.6.7 snmpwalk -v2c -c public <target> AC-CONTROL-MIB::acCPMediaDspAllocationMethod
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5003.9.10.5.1.1.6.7.1 snmpget -v2c -c public <target> AC-CONTROL-MIB::acCPMediaDspAllocationMethod.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5003.9.10.5.1.1.6.7.1 i <value>
Start monitoring AudioCodes Mediant-series gateways/media servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AC-CONTROL-MIB::acCPMediaDspAllocationMethod OID value, configure state conditions and alerts, and monitor any AudioCodes Mediant-series gateways/media servers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.5003 | audioCodes | AC-ALARM-MIB |
| 1.3.6.1.4.1.5003.9 | acProducts | AC-ATM-MIB |
| 1.3.6.1.4.1.5003.9.10 | acBoardMibs | AC-ATM-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5003.9.10.5 | acControl | AC-CONTROL-MIB |
| 1.3.6.1.4.1.5003.9.10.5.1 | acControlConfiguration | AC-CONTROL-MIB |
| 1.3.6.1.4.1.5003.9.10.5.1.1 | acControlCommonConfig | AC-CONTROL-MIB |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6 | acCPMedia | AC-CONTROL-MIB |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.7 | acCPMediaDspAllocationMethod | AC-CONTROL-MIB |