TIMETRA-LMP-MIB

All MIBs › TIMETRA-LMP-MIB

Organization: Nokia

Last Updated: 2014-04-24

Description: TIMETRA-LMP-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIMETRA-LMP-MIB?

TIMETRA-LMP-MIB is a Nokia (formerly Alcatel-Lucent) proprietary SNMP module for the SR OS operating system, part of the TIMETRA enterprise MIB family used on 7750/7450/7250 routers. It exposes configuration and operational state for the Link Management Protocol (LMP), a GMPLS control-plane protocol that verifies control-channel connectivity and correlates data-link properties between neighboring optical/packet nodes on a per-virtual-router basis. Administrators use it to monitor administrative and operational state of LMP instances and peer relationships, effectively tracking whether the control-plane link-management session to a neighbor is up or down. Because LMP underpins GMPLS-based transport signaling, this MIB is typically polled alongside other TIMETRA GMPLS/MPLS MIBs (e.g. TE, RSVP) rather than in isolation. It is deployed on carrier-grade Nokia SROS routers/optical-transport edge nodes in GMPLS-enabled backbone or metro networks, and the TIMETRA-LMP-MIB download lets administrators load it directly into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-LMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia 7750 SR / 7450 ESS / 7250 IXR routers running SR OS
GMPLS-enabled optical/packet transport nodes

Monitoring Examples

An operator would poll tmnxLmpVRtrTable/tmnxLmpVRtrEntry to see per-virtual-router LMP administrative (tmnxLmpVRtrAdminState) and operational (tmnxLmpVRtrOperState) state, flagging a mismatch (admin up, oper down) as a control-channel failure to a peer. The tmnxLmpVRtrPeerTable lists discovered LMP peers, letting an admin confirm that a router's configured GMPLS loopback address (tmnxLmpVRtrGmplsLoopbackAddress) is correctly forming adjacencies. Polling tmnxLmpVRtrTableLastChanged/tmnxLmpVRtrLastChanged timestamps helps detect recent reconfiguration events that could correlate with a link-management outage.

What Can Be Monitored

LMP admin/operational state per virtual router
LMP peer adjacency table
GMPLS loopback address configuration
control-channel last-changed timestamps

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From TIMETRA-GLOBAL-MIB

timetraSRMIBModules	OBJECT-IDENTITY
tmnxSRConfs	OBJECT-IDENTITY
tmnxSRNotifyPrefix	OBJECT-IDENTITY
tmnxSRObjs	OBJECT-IDENTITY

From TIMETRA-TC-MIB

TNamedItemOrEmpty
TmnxAdminState
TmnxPortID

From TIMETRA-VRTR-MIB

vRtrID

OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using tmnxLmpVRtrCcInErrors OID:

Select a Nokia 7750 SR / 7450 ESS / 7250 IXR routers running SR OS (GMPLS Link Management Protocol peer status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tmnxLmpVRtrCcInErrors into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of tmnxLmpVRtrCcInErrors indicates the number of inbound packets that contained errors preventing them from being processed by LMP. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
timetraLmpMIBModule	1.3.6.1.4.1.6527.1.1.3.100			This document is the SNMP MIB module to manage and provision the Link Management Protocol (LMP) components of the Nokia SROS device. Copyright (c) 2014-2016 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxLmpCompliances	1.3.6.1.4.1.6527.3.1.1.100.1
tmnxLmpComplianceV13v0	1.3.6.1.4.1.6527.3.1.1.100.1.1			The compliance statement for the management of the Link Management Protocol for Release 13.0 on Nokia SROS series systems.
tmnxLmpConfigTimeStamps	1.3.6.1.4.1.6527.3.1.2.100.1
tmnxLmpConfigurations	1.3.6.1.4.1.6527.3.1.2.100.2
tmnxLmpConformance	1.3.6.1.4.1.6527.3.1.1.100
tmnxLmpGroups	1.3.6.1.4.1.6527.3.1.1.100.2
tmnxLmpNotification	1.3.6.1.4.1.6527.3.1.3.100.0
tmnxLmpNotifyObjects	1.3.6.1.4.1.6527.3.1.2.100.4
tmnxLmpNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.100
tmnxLmpObjs	1.3.6.1.4.1.6527.3.1.2.100
tmnxLmpStatistics	1.3.6.1.4.1.6527.3.1.2.100.3
tmnxLmpV13v0Groups	1.3.6.1.4.1.6527.3.1.1.100.2.1
TMN tmnxLmpVRtrAdminState	1.3.6.1.4.1.6527.3.1.2.100.2.1.1.3	TmnxAdminState	read-create	The value of tmnxLmpVRtrAdminState specifies the administrative state of the LMP on the virtual router instance.
TMN tmnxLmpVRtrCcAdminState	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.4	TmnxAdminState	read-create	The value of tmnxLmpVRtrCcAdminState specifies the administrative state of this control channel.
C32 tmnxLmpVRtrCcConfigAckReceived	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.6	Counter32	read-only	The value of tmnxLmpVRtrCcConfigAckReceived indicates the number of ConfigAck messages that have been received on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcConfigAckSent	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.7	Counter32	read-only	The value of tmnxLmpVRtrCcConfigAckSent indicates the number of ConfigAck messages that have been sent on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcConfigNackReceived	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.8	Counter32	read-only	The value of tmnxLmpVRtrCcConfigNackReceived indicates the number of ConfigNack messages that have been received on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcConfigNackSent	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.9	Counter32	read-only	The value of tmnxLmpVRtrCcConfigNackSent indicates the number of ConfigNack messages that have been sent on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcConfigReceived	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.3	Counter32	read-only	The value of tmnxLmpVRtrCcConfigReceived indicates the number of Config messages that have been received on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcConfigRetransmit	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.5	Counter32	read-only	The value of tmnxLmpVRtrCcConfigRetransmit indicates the number of Config messages that have been retransmitted over this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcConfigSent	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.4	Counter32	read-only	The value of tmnxLmpVRtrCcConfigSent indicates the number of Config messages that have been sent on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
TIM tmnxLmpVRtrCcDiscontinuityTime	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.20	TimeStamp	read-only	The value of tmnxLmpVRtrCcDiscontinuityTime indicates the sysUpTime on the most recent occasion at which one or more of this control channel's counters suffered a discontinuity. The relevant counters are the specific instances associated with this control channel of any Counter32 object contained in the tmnxLmpVRtrControlChanStatsTable. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
tmnxLmpVRtrCcGroupV13v0	1.3.6.1.4.1.6527.3.1.1.100.2.1.3			The group of objects maintaining the Link Management Protocol (LMP) Control Channel configuration for the virtual router instances on Nokia SROS series systems for Release 13.0.
U32 tmnxLmpVRtrCcHelloDeadInterval	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.12	Unsigned32	read-create	The value of tmnxLmpVRtrCcHelloDeadInterval specifies the value of the HelloDeadInterval parameter.
U32 tmnxLmpVRtrCcHelloDeadIntvNeg	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.13	Unsigned32	read-only	The value of tmnxLmpVRtrCcHelloDeadIntvNeg indicates the negotiated HelloDeadInterval value when the control channel is active.
U32 tmnxLmpVRtrCcHelloInterval	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.10	Unsigned32	read-create	The value of tmnxLmpVRtrCcHelloInterval specifies the value of the HelloInterval parameter.
U32 tmnxLmpVRtrCcHelloIntvNeg	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.11	Unsigned32	read-only	The value of tmnxLmpVRtrCcHelloIntvNeg indicates the negotiated HelloInterval value when the control channel is active.
C32 tmnxLmpVRtrCcHelloReceived	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.10	Counter32	read-only	The value of tmnxLmpVRtrCcHelloReceived indicates the number of Hello messages that have been received on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcHelloSent	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.12	Counter32	read-only	The value of tmnxLmpVRtrCcHelloSent indicates the number of Hello messages that have been sent on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
U32 tmnxLmpVRtrCcId	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.1	Unsigned32	not-accessible	The value of tmnxLmpVRtrCcId specifies a unique value which identifies the control channel on the given virtual router instance.
C32 tmnxLmpVRtrCcInErrorsEx	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.1	Counter32	read-only	The value of tmnxLmpVRtrCcInErrors indicates the number of inbound packets that contained errors preventing them from being processed by LMP. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
TIM tmnxLmpVRtrCcLastChanged	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.3	TimeStamp	read-only	The value of tmnxLmpVRtrCcLastChanged indicates the time, since system startup, that the configuration of this control channel was created or modified.
C32 tmnxLmpVRtrCcLinkSumAckReceived	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.16	Counter32	read-only	The value of tmnxLmpVRtrCcLinkSumAckReceived indicates the number of LinkSummaryAck messages that have been received on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcLinkSumAckSent	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.17	Counter32	read-only	The value of tmnxLmpVRtrCcLinkSumAckSent indicates the number of LinkSummaryAck messages that have been sent on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcLinkSumNackReceived	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.18	Counter32	read-only	The value of tmnxLmpVRtrCcLinkSumNackReceived indicates the number of LinkSummaryNack messages that have been received on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcLinkSumNackSent	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.19	Counter32	read-only	The value of tmnxLmpVRtrCcLinkSumNackSent indicates the number of LinkSummaryNack messages that have been sent on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcLinkSumReceived	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.13	Counter32	read-only	The value of tmnxLmpVRtrCcLinkSumReceived indicates the number of LinkSummary messages that have been received on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcLinkSumRetransmit	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.15	Counter32	read-only	The value of tmnxLmpVRtrCcLinkSumRetransmit indicates the number of LinkSummary messages that have been retransmitted over this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
C32 tmnxLmpVRtrCcLinkSumSent	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.14	Counter32	read-only	The value of tmnxLmpVRtrCcLinkSumSent indicates the number of LinkSummary messages that have been sent on this control channel. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
INT tmnxLmpVRtrCcOperState	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.5	INTEGER	read-only	The value of tmnxLmpVRtrCcOperState indicates the operational state of this control channel.
C32 tmnxLmpVRtrCcOutErrors	1.3.6.1.4.1.6527.3.1.2.100.3.1.1.2	Counter32	read-only	The value of tmnxLmpVRtrCcOutErrors indicates the number of outbound packets that could not be transmitted because of errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrCcDiscontinuityTime.
IP tmnxLmpVRtrCcPeerIfAddress	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.8	InetAddress	read-create	The value of tmnxLmpVRtrCcPeerIfAddress specifies the remote control channel Internet address for numbered control channel. The type of this address is determined by tmnxLmpVRtrCcPeerIfAddressType. The control channel must be numbered on non-point-to-point configuration. For point-to-point configuration, the remote control channel address can be of type 'unknown (0)', in which case this object must be a zero-length string. The tmnxLmpVRtrCcRemoteId object then identifies the unnumbered address.
IPt tmnxLmpVRtrCcPeerIfAddressType	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.7	InetAddressType	read-create	The value of tmnxLmpVRtrCcPeerIfAddressType specifies the remote control channel IP address type. In point-to-point configuration, this value can be set to 'unknown (0)'.
U32 tmnxLmpVRtrCcRemoteId	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.6	Unsigned32	read-only	The value of tmnxLmpVRtrCcRemoteId indicates the remote control channel identifier. It is determined during the negotiation phase. A value of zero means that the remote control channel identifier has not yet been learned.
ROW tmnxLmpVRtrCcRowStatus	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.2	RowStatus	read-create	The value of tmnxLmpVRtrCcRowStatus specifies the row status. It allows the creation and deletion of this control channel on the given virtual router instance.
INT tmnxLmpVRtrCcSetupRole	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.9	INTEGER	read-create	The value of tmnxLmpVRtrCcSetupRole specifies the role that this node should take during establishment of this control channel. An active node will initiate establishment. A passive node will wait for the remote node to initiate. A pair of nodes that both take the passive role will never establish communications.
tmnxLmpVRtrCcStatsGroupV13v0	1.3.6.1.4.1.6527.3.1.1.100.2.1.6			The group of objects maintaining the Link Management Protocol (LMP) Control Channel Statistics for the virtual router instances on Nokia SROS series systems for Release 13.0.
TIM tmnxLmpVRtrCcTableLastChanged	1.3.6.1.4.1.6527.3.1.2.100.1.3	TimeStamp	read-only	The value of tmnxLmpVRtrCcTableLastChanged indicates the time, since system startup, when tmnxLmpVRtrControlChannelTable last changed configuration.
U32 tmnxLmpVRtrCcTtl	1.3.6.1.4.1.6527.3.1.2.100.2.3.1.14	Unsigned32	read-create	The value of tmnxLmpVRtrCcTtl specifies the Time-To-Live (TTL) value used in the LMP and RSVP control packet IP header.
tmnxLmpVRtrControlChannelEntry	1.3.6.1.4.1.6527.3.1.2.100.2.3.1		not-accessible	The tmnxLmpVRtrControlChannelEntry consists of the configurable objects for a control channel on a given peer and virtual router instance.
NTF tmnxLmpVRtrControlChannelState	1.3.6.1.4.1.6527.3.1.3.100.0.5			[CAUSE] The tmnxLmpVRtrControlChannelState notification is generated when a control channel transitions to or from the 'up (1)' operational state. [EFFECT] If no control channels to the peer-node are up, the related TE links cannot be used to set up new GMPLS label-switched paths (LSPs). [RECOVERY] Ensure the control channel peer-interface is reachable.
tmnxLmpVRtrControlChannelTable	1.3.6.1.4.1.6527.3.1.2.100.2.3		not-accessible	The tmnxLmpVRtrControlChannelTable contains LMP control channel information.
tmnxLmpVRtrControlChanStatsEntry	1.3.6.1.4.1.6527.3.1.2.100.3.1.1		not-accessible	The tmnxLmpVRtrControlChanStatsEntry consists of statistical information about a control channel for a virtual router instance.
tmnxLmpVRtrControlChanStatsTable	1.3.6.1.4.1.6527.3.1.2.100.3.1		not-accessible	The tmnxLmpVRtrControlChanStatsTable contains the LMP control channel statistics counters for a virtual router instance.
TMN tmnxLmpVRtrDbLinkAdminState	1.3.6.1.4.1.6527.3.1.2.100.2.5.1.4	TmnxAdminState	read-create	The value of tmnxLmpVRtrDbLinkAdminState specifies the administrative state of this DB link.
tmnxLmpVRtrDbLinkEntry	1.3.6.1.4.1.6527.3.1.2.100.2.5.1		not-accessible	The tmnxLmpVRtrDbLinkEntry consists of the configurable objects for a DB link on a given TE link and virtual router instance.
tmnxLmpVRtrDbLinkGroupV13v0	1.3.6.1.4.1.6527.3.1.1.100.2.1.5			The group of objects maintaining the Link Management Protocol (LMP) Data Bearing (DB) Links configuration for the virtual router instances on Nokia SROS series systems for Release 13.0.
U32 tmnxLmpVRtrDbLinkId	1.3.6.1.4.1.6527.3.1.2.100.2.5.1.1	Unsigned32	not-accessible	The value of tmnxLmpVRtrDbLinkId specifies a unique value which identifies this DB link on the given virtual router instance. The identifiers for TE links (tmnxLmpVRtrTeLinkId) and DB links (tmnxLmpVRtrDbLinkId) cannot be the same for a particular virtual router instance.
TIM tmnxLmpVRtrDbLinkLastChanged	1.3.6.1.4.1.6527.3.1.2.100.2.5.1.3	TimeStamp	read-only	The value of tmnxLmpVRtrDbLinkLastChanged indicates the time, since system startup, that the configuration of this DB link was created or modified.
INT tmnxLmpVRtrDbLinkOperState	1.3.6.1.4.1.6527.3.1.2.100.2.5.1.5	INTEGER	read-only	The value of tmnxLmpVRtrDbLinkOperState indicates the operational state of this DB link.
TMN tmnxLmpVRtrDbLinkPortId	1.3.6.1.4.1.6527.3.1.2.100.2.5.1.6	TmnxPortID	read-create	The value of tmnxLmpVRtrDbLinkPortId specifies the port identifier of the port associated to this DB link. A value of '1e000000'H indicates this object has not been configured.
NTF tmnxLmpVRtrDbLinkPropMismatch	1.3.6.1.4.1.6527.3.1.3.100.0.3			[CAUSE] The tmnxLmpVRtrDbLinkPropMismatch notification is generated when a DB link property mismatch is detected on the node. This notification is only generated the first time a mismatch is detected. [EFFECT] The DB link is operationally down when a mismatch is detected. [RECOVERY] Ensure the DB link configuration between the local node and the peer node is consistent.
NTF tmnxLmpVRtrDbLinkPropMismatchClr	1.3.6.1.4.1.6527.3.1.3.100.0.4			[CAUSE] The tmnxLmpVRtrDbLinkPropMismatchClr notification is generated when the DB link property mismatch is cleared. [EFFECT] The DB link can now service traffic. [RECOVERY] There is no recovery required for this notification.
BIT tmnxLmpVRtrDbLinkReasonDownFlags	1.3.6.1.4.1.6527.3.1.2.100.2.5.1.8	Bits	read-only	The value of tmnxLmpVRtrDbLinkReasonDownFlags indicates the reason(s) why this DB link is operationally down. The recognized BIT values are: unknown (0) - unspecified or unknown adminDn (1) - the DB link or related LMP entity (i.e. TE link, peer, etc.) is administratively down, or - parent TE link is not associated with any peer lpcFault (2) - the link property correlation failed remoteLkFault (3) - the DB Link Summary message received had the 'Failed Link' flag set by the peer portAdminDn (4) - the port or associated MDA/IOM is administratively down portFault (5) - the port is either not present, or the DB link detected a signal failure (e.g. loss of light) gmplsTeDn (6) - the GMPLS TE link (vRtrGmplsTeLinkEntry) is either not present or administratively down
U32 tmnxLmpVRtrDbLinkRemoteId	1.3.6.1.4.1.6527.3.1.2.100.2.5.1.7	Unsigned32	read-create	The value of tmnxLmpVRtrDbLinkRemoteId specifies the identifier of the remote endpoint for this DB link. Zero indicates this object has not been configured.
ROW tmnxLmpVRtrDbLinkRowStatus	1.3.6.1.4.1.6527.3.1.2.100.2.5.1.2	RowStatus	read-create	The value of tmnxLmpVRtrDbLinkRowStatus specifies the row status. It allows the creation and deletion of this DB link on the given TE link and virtual router instance.
tmnxLmpVRtrDbLinkTable	1.3.6.1.4.1.6527.3.1.2.100.2.5		not-accessible	The tmnxLmpVRtrDbLinkTable contains the Data Bearing (DB) links managed by the LMP.
TIM tmnxLmpVRtrDbLinkTableLastChange	1.3.6.1.4.1.6527.3.1.2.100.1.5	TimeStamp	read-only	The value of tmnxLmpVRtrDbLinkTableLastChange indicates the time, since system startup, when tmnxLmpVRtrDbLinkTable last changed configuration.
tmnxLmpVRtrEntry	1.3.6.1.4.1.6527.3.1.2.100.2.1.1		not-accessible	The tmnxLmpVRtrEntry consists of the LMP configurable objects for a virtual router instance.
IP tmnxLmpVRtrGmplsLoopbackAddress	1.3.6.1.4.1.6527.3.1.2.100.2.1.1.6	InetAddress	read-create	The value of tmnxLmpVRtrGmplsLoopbackAddress specifies the GMPLS loopback address for the virtual router instance.
IPt tmnxLmpVRtrGmplsLoopbackAddrType	1.3.6.1.4.1.6527.3.1.2.100.2.1.1.5	InetAddressType	read-create	The value of tmnxLmpVRtrGmplsLoopbackAddrType specifies the address type of tmnxLmpVRtrGmplsLoopbackAddress.
tmnxLmpVRtrGroupV13v0	1.3.6.1.4.1.6527.3.1.1.100.2.1.1			The group of objects maintaining the Link Management Protocol (LMP) configuration for the virtual router instances on Nokia SROS series systems for Release 13.0.
TIM tmnxLmpVRtrLastChanged	1.3.6.1.4.1.6527.3.1.2.100.2.1.1.2	TimeStamp	read-only	The value of tmnxLmpVRtrLastChanged indicates the time, since system startup, that the configuration of the LMP on the virtual router instance was created or modified.
tmnxLmpVRtrNotifGroupV13v0	1.3.6.1.4.1.6527.3.1.1.100.2.1.8			The group of notifications supporting the Link Management Protocol (LMP) configuration for the virtual router instances on Nokia SROS series systems for Release 13.0.
INT tmnxLmpVRtrOperState	1.3.6.1.4.1.6527.3.1.2.100.2.1.1.4	INTEGER	read-only	The value of tmnxLmpVRtrOperState indicates the operational state of the LMP on the virtual router instance.
TMN tmnxLmpVRtrPeerAdminState	1.3.6.1.4.1.6527.3.1.2.100.2.2.1.4	TmnxAdminState	read-create	The value of tmnxLmpVRtrPeerAdminState specifies the administrative state of LMP on this remote node.
tmnxLmpVRtrPeerEntry	1.3.6.1.4.1.6527.3.1.2.100.2.2.1		not-accessible	The tmnxLmpVRtrPeerEntry consists of every pair of nodes that can establish control channels on a given virtual router instance.
tmnxLmpVRtrPeerGroupV13v0	1.3.6.1.4.1.6527.3.1.1.100.2.1.2			The group of objects maintaining the Link Management Protocol (LMP) Peer configuration for the virtual router instances on Nokia SROS series systems for Release 13.0.
TIM tmnxLmpVRtrPeerLastChanged	1.3.6.1.4.1.6527.3.1.2.100.2.2.1.3	TimeStamp	read-only	The value of tmnxLmpVRtrPeerLastChanged indicates the time, since system startup, that the configuration of this remote node was created or modified.
IP tmnxLmpVRtrPeerLoopbackAddress	1.3.6.1.4.1.6527.3.1.2.100.2.2.1.7	InetAddress	read-create	The value of tmnxLmpVRtrPeerLoopbackAddress specifies the loopback address for this remote node.
IPt tmnxLmpVRtrPeerLoopbackAddrType	1.3.6.1.4.1.6527.3.1.2.100.2.2.1.6	InetAddressType	read-create	The value of tmnxLmpVRtrPeerLoopbackAddrType specifies the address type of tmnxLmpVRtrPeerLoopbackAddress.
U32 tmnxLmpVRtrPeerNodeId	1.3.6.1.4.1.6527.3.1.2.100.2.2.1.1	Unsigned32	not-accessible	The value of tmnxLmpVRtrPeerNodeId specifies the unique node identifier of this remote node on the given virtual router instance.
INT tmnxLmpVRtrPeerOperState	1.3.6.1.4.1.6527.3.1.2.100.2.2.1.5	INTEGER	read-only	The value of tmnxLmpVRtrPeerOperState indicates the operational state of LMP on this remote node.
U32 tmnxLmpVRtrPeerRetransmitDelta	1.3.6.1.4.1.6527.3.1.2.100.2.2.1.10	Unsigned32	read-only	The value of tmnxLmpVRtrPeerRetransmitDelta indicates the speed with which the sender increases the retransmission interval, as explained in Section 10 of the Link Management Protocol specification, which is based on RFC 2914. The ratio of two successive retransmission intervals is (1 + Delta).
U32 tmnxLmpVRtrPeerRetransmitIntvl	1.3.6.1.4.1.6527.3.1.2.100.2.2.1.8	Unsigned32	read-create	The value of tmnxLmpVRtrPeerRetransmitIntvl specifies the initial retransmission interval that is used for the retransmission of messages that require acknowledgement. This object, along with tmnxLmpVRtrPeerRetryLimit, is used to implement the congestion-handling mechanism defined in Section 10 of the Link Management Protocol specification, which is based on RFC 2914.
U32 tmnxLmpVRtrPeerRetryLimit	1.3.6.1.4.1.6527.3.1.2.100.2.2.1.9	Unsigned32	read-create	The value of tmnxLmpVRtrPeerRetryLimit specifies the maximum number of times a message is transmitted without being acknowledged. A value of 0 is used to indicate that a node should never stop retransmission. This object, along with tmnxLmpVRtrPeerRetransmitIntvl, is used to implement the congestion-handling mechanism as defined in Section 10 of the Link Management Protocol specification, which is based on RFC 2914.
ROW tmnxLmpVRtrPeerRowStatus	1.3.6.1.4.1.6527.3.1.2.100.2.2.1.2	RowStatus	read-create	The value of tmnxLmpVRtrPeerRowStatus specifies the row status. It allows the creation and deletion of this remote node on the given virtual router instance.
tmnxLmpVRtrPeerTable	1.3.6.1.4.1.6527.3.1.2.100.2.2		not-accessible	The tmnxLmpVRtrPeerTable contains the peer node(s) to which control channels may be established.
TIM tmnxLmpVRtrPeerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.100.1.2	TimeStamp	read-only	The value of tmnxLmpVRtrPeerTableLastChanged indicates the time, since system startup, when tmnxLmpVRtrPeerTable last changed configuration.
ROW tmnxLmpVRtrRowStatus	1.3.6.1.4.1.6527.3.1.2.100.2.1.1.1	RowStatus	read-create	The value of tmnxLmpVRtrRowStatus specifies the row status. It allows the creation and deletion of the LMP on the virtual router instance.
tmnxLmpVRtrTable	1.3.6.1.4.1.6527.3.1.2.100.2.1		not-accessible	The tmnxLmpVRtrTable contains the Link Management Protocol (LMP) configuration information for the virtual router instances.
TIM tmnxLmpVRtrTableLastChanged	1.3.6.1.4.1.6527.3.1.2.100.1.1	TimeStamp	read-only	The value of tmnxLmpVRtrTableLastChanged indicates the time, since system startup, when tmnxLmpVRtrTable last changed configuration.
TMN tmnxLmpVRtrTeLinkAdminState	1.3.6.1.4.1.6527.3.1.2.100.2.4.1.4	TmnxAdminState	read-create	The value of tmnxLmpVRtrTeLinkAdminState specifies the administrative state of this TE link.
TIM tmnxLmpVRtrTeLinkDiscntnuityTime	1.3.6.1.4.1.6527.3.1.2.100.3.2.1.8	TimeStamp	read-only	The value of tmnxLmpVRtrTeLinkDiscntnuityTime indicates the sysUpTime on the most recent occasion at which one or more of this TE link's counters suffered a discontinuity. The relevant counters are the specific instances associated with this TE link of any Counter32 object contained in the tmnxLmpVRtrTeLinkStatsTable. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
tmnxLmpVRtrTeLinkEntry	1.3.6.1.4.1.6527.3.1.2.100.2.4.1		not-accessible	The tmnxLmpVRtrEntry consists of the configurable objects for a TE link on a given virtual router instance.
tmnxLmpVRtrTeLinkGroupV13v0	1.3.6.1.4.1.6527.3.1.1.100.2.1.4			The group of objects maintaining the Link Management Protocol (LMP) Traffic Engineering (TE) Links configuration for the virtual router instances on Nokia SROS series systems for Release 13.0.
U32 tmnxLmpVRtrTeLinkId	1.3.6.1.4.1.6527.3.1.2.100.2.4.1.1	Unsigned32	not-accessible	The value of tmnxLmpVRtrTeLinkId specifies a unique value which identifies this TE link on the given virtual router instance. The identifiers for TE links (tmnxLmpVRtrTeLinkId) and DB links (tmnxLmpVRtrDbLinkId) cannot be the same for a particular virtual router instance.
TIM tmnxLmpVRtrTeLinkLastChanged	1.3.6.1.4.1.6527.3.1.2.100.2.4.1.3	TimeStamp	read-only	The value of tmnxLmpVRtrTeLinkLastChanged indicates the time, since system startup, that the configuration of this TE link was created or modified.
TNA tmnxLmpVRtrTeLinkName	1.3.6.1.4.1.6527.3.1.2.100.2.4.1.6	TNamedItemOrEmpty	read-create	The value of tmnxLmpVRtrTeLinkName specifies a unique name for this TE link on the given virtual router instance.
INT tmnxLmpVRtrTeLinkOperState	1.3.6.1.4.1.6527.3.1.2.100.2.4.1.5	INTEGER	read-only	The value of tmnxLmpVRtrTeLinkOperState indicates the operational state of this TE link.
U32 tmnxLmpVRtrTeLinkPeerNodeId	1.3.6.1.4.1.6527.3.1.2.100.2.4.1.8	Unsigned32	read-create	The value of tmnxLmpVRtrTeLinkPeerNodeId specifies the node identifier of the remote node for this TE link. Zero indicates that this object is not configured.
NTF tmnxLmpVRtrTeLinkPropMismatch	1.3.6.1.4.1.6527.3.1.3.100.0.1			[CAUSE] The tmnxLmpVRtrTeLinkPropMismatch notification is generated when a TE link property mismatch is detected on the node. This notification is only generated the first time a mismatch is detected. [EFFECT] The TE link is operationally down when a mismatch is detected. [RECOVERY] Ensure the TE link configuration between the local node and the peer node is consistent.
NTF tmnxLmpVRtrTeLinkPropMismatchClr	1.3.6.1.4.1.6527.3.1.3.100.0.2			[CAUSE] The tmnxLmpVRtrTeLinkPropMismatchClr notification is generated when a TE link property mismatch is cleared. [EFFECT] The TE link can now service traffic. [RECOVERY] There is no recovery required for this notification.
U32 tmnxLmpVRtrTeLinkRemoteId	1.3.6.1.4.1.6527.3.1.2.100.2.4.1.7	Unsigned32	read-create	The value of tmnxLmpVRtrTeLinkRemoteId specifies the identifier for the remote endpoint of this TE link. Zero indicates this object has not been configured.
ROW tmnxLmpVRtrTeLinkRowStatus	1.3.6.1.4.1.6527.3.1.2.100.2.4.1.2	RowStatus	read-create	The value of tmnxLmpVRtrTeLinkRowStatus specifies the row status. It allows the creation and deletion of this TE link on the given virtual router instance.
NTF tmnxLmpVRtrTeLinkState	1.3.6.1.4.1.6527.3.1.3.100.0.6			[CAUSE] The tmnxLmpVRtrTeLinkState notification is generated when a TE link's operational state changes. [EFFECT] When tmnxLmpVRtrTeLinkOperState is not 'up (1)', no new GMPLS LSPs can be set up using this TE link. [RECOVERY] When tmnxLmpVRtrTeLinkOperState is 'degraded (5)', bring up at least one control channel with the relevant peer node.
tmnxLmpVRtrTeLinkStatsEntry	1.3.6.1.4.1.6527.3.1.2.100.3.2.1		not-accessible	The tmnxLmpVRtrTeLinkStatsEntry consists of statistical information about a TE link for a virtual router instance.
tmnxLmpVRtrTeLinkStatsGroupV13v0	1.3.6.1.4.1.6527.3.1.1.100.2.1.7			The group of objects maintaining the Link Management Protocol (LMP) Traffic Engineering (TE) Link Statistics for the virtual router instances on Nokia SROS series systems for Release 13.0.
tmnxLmpVRtrTeLinkStatsTable	1.3.6.1.4.1.6527.3.1.2.100.3.2		not-accessible	The tmnxLmpVRtrTeLinkStatsTable contains the LMP Traffic Engineering (TE) link statistics counters for a virtual router instance.
C32 tmnxLmpVRtrTeLinkSumAckReceived	1.3.6.1.4.1.6527.3.1.2.100.3.2.1.4	Counter32	read-only	The value of tmnxLmpVRtrTeLinkSumAckReceived indicates the number of LinkSummaryAck messages that have been received for this TE link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime.
C32 tmnxLmpVRtrTeLinkSumAckSent	1.3.6.1.4.1.6527.3.1.2.100.3.2.1.5	Counter32	read-only	The value of tmnxLmpVRtrTeLinkSumAckSent indicates the number of LinkSummaryAck messages that have been sent for this TE link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime.
C32 tmnxLmpVRtrTeLinkSumNackReceived	1.3.6.1.4.1.6527.3.1.2.100.3.2.1.6	Counter32	read-only	The value of tmnxLmpVRtrTeLinkSumNackReceived indicates the number of LinkSummaryNack messages that have been received for this TE link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime.
C32 tmnxLmpVRtrTeLinkSumNackSent	1.3.6.1.4.1.6527.3.1.2.100.3.2.1.7	Counter32	read-only	The value of tmnxLmpVRtrTeLinkSumNackSent indicates the number of LinkSummaryNack messages that have been sent for this TE link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime.
C32 tmnxLmpVRtrTeLinkSumReceived	1.3.6.1.4.1.6527.3.1.2.100.3.2.1.1	Counter32	read-only	The value of tmnxLmpVRtrTeLinkSumReceived indicates the number of LinkSummary messages that have been received for this TE link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime.
C32 tmnxLmpVRtrTeLinkSumRetransmit	1.3.6.1.4.1.6527.3.1.2.100.3.2.1.3	Counter32	read-only	The value of tmnxLmpVRtrTeLinkSumRetransmit indicates the number of LinkSummary messages that have been retransmitted for this TE link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime.
C32 tmnxLmpVRtrTeLinkSumSent	1.3.6.1.4.1.6527.3.1.2.100.3.2.1.2	Counter32	read-only	The value of tmnxLmpVRtrTeLinkSumSent indicates the number of LinkSummary messages that have been sent for this TE link. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of tmnxLmpVRtrTeLinkDiscntnuityTime.
tmnxLmpVRtrTeLinkTable	1.3.6.1.4.1.6527.3.1.2.100.2.4		not-accessible	The tmnxLmpVRtrTeLinkTable contains the Traffic Engineering (TE) link managed by the LMP.
TIM tmnxLmpVRtrTeLinkTableLastChange	1.3.6.1.4.1.6527.3.1.2.100.1.4	TimeStamp	read-only	The value of tmnxLmpVRtrTeLinkTableLastChange indicates the time, since system startup, when tmnxLmpVRtrTeLinkTable last changed configuration.

RFC description

Monitors Link Management Protocol (LMP) TE tunnel and adjacency state on Nokia/Timetra SR series routers; vendor-private.

Start monitoring Nokia 7750 SR / 7450 ESS / 7250 IXR routers running SR OS (GMPLS Link Management Protocol peer status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-LMP-MIB