All MIBs › A3COM-HUAWEI-MPLS-LDP-MIB › hwMplsLdpCrlspTnlPeakDataRate
hwMplsLdpCrlspTnlPeakDataRate
Module: A3COM-HUAWEI-MPLS-LDP-MIB
OID (symbolic): A3COM-HUAWEI-MPLS-LDP-MIB::hwMplsLdpCrlspTnlPeakDataRate
OID (numeric): 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.7
Node type: OBJECT-TYPE
Type: BitRate
Access: read-create
Description: The peak rate - the maximum rate at which traffic will be sent on the CRLSP.
What is hwMplsLdpCrlspTnlPeakDataRate?
This OID specifies the maximum bit rate allowed on the tunnel (in bits per second). Network engineers configure this to enforce traffic shaping and prevent congestion on constrained paths. A typical value is 100000000 bits/sec (100 Mbps) for bandwidth-limited tunnels.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-BRIDGE-R3-MIB |
| 1.3.6.1.4.1.43.45 | jv_mib | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1 | huawei | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.5 | huaweiMgmt | A3COM-HUAWEI-OID-MIB |
| 1.3.6.1.4.1.43.45.1.5.12 | hwMpls | A3COM-HUAWEI-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.45.1.5.12.2 | hwMplsLdp | A3COM-HUAWEI-MPLS-LDP-MIB |
| 1.3.6.1.4.1.43.45.1.5.12.2.1 | hwMplsLdpObjects | A3COM-HUAWEI-MPLS-LDP-MIB |
| 1.3.6.1.4.1.43.45.1.5.12.2.1.6 | hwMplsLdpCrlspTnlObjects | A3COM-HUAWEI-MPLS-LDP-MIB |
| 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1 | hwMplsLdpCrlspTnlTable | A3COM-HUAWEI-MPLS-LDP-MIB |
| 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1 | hwMplsLdpCrlspTnlEntry | A3COM-HUAWEI-MPLS-LDP-MIB |
| 1.3.6.1.4.1.43.45.1.5.12.2.1.6.1.1.7 | hwMplsLdpCrlspTnlPeakDataRate | A3COM-HUAWEI-MPLS-LDP-MIB |