13 modules from Sagem
Sagem's MIBs in this database cover SDH/PDH transmission and radio-link transport equipment (the ADR access multiplexer family, SDH-ETS-MIB, and digital radio link modules under the SAGEM-Tolbiac branch), including cross-connection routing, protection switching, and shelf/card inventory for these transport chassis. Recurring subject matter is transmission-quality and fault status rather than general IT metrics: errored/severely-errored/unavailable-second performance counters (ES/SES/UAS/BBE), SDH termination-point alarms and loopback state, radio-link and cross-connect protection-switchover events, plus a shared event log and multi-session (SNMP/HTTP/CLI/vt100) management-access tracking used across the product line. Come to this page if you manage Sagem/Sagem-Tolbiac SDH, PDH, or radio-link transport gear and need vendor-specific alarm severity, protection-switching, or performance-threshold objects. Several modules here (the ADR-series MIBs) actually describe Telindus/Spirent-branded multiplexers bundled under this vendor bucket, so confirm which physical product a given MIB applies to before assuming it's Sagem-branded hardware.
| Module | Description |
|---|---|
| ADR155C-MIB | Manages the Telindus/Spirent ADR 155C STM-1 optical add-drop multiplexer, providing signal status and performance monitoring objects. |
| ADR2500C-MIB | Manages the Telindus/Spirent ADR 2500C optical transport multiplexer for configuration and performance monitoring. |
| ADR63E1-MIB | Manages the Telindus/Spirent ADR 63xE1 optical multiplexer providing tributary configuration and performance monitoring objects. |
| GIGE-MIB | SAGEM Gigabit Ethernet MIB for managing GigE interface configuration, performance monitoring, and error statistics. |
| LOG-MIB | SAGEM MIB covering logging configuration and log entry management for recording telecom and network equipment events. |
| PERFORMANCE-MIB | Reports SAGEM network device performance counters for monitored interfaces and protocol-layer traffic statistics. |
| PROTECTION-MIB | Manages SAGEM radio link protection switching configuration, active/standby path status, and switchover events. |
| SAGEM-DR-MIB | Manages SAGEM-Tolbiac digital radio link configuration, modulation, and transport statistics. |
| SDH-ETS-MIB | Manages SAGEM SDH synchronous transport equipment configuration and performance monitoring. |
| SESSION-MIB | Manages SAGEM/DR device session establishment, teardown, and active connection state. |
| SHELF-MIB | Manages SAGEM shelf chassis slot configuration, card inventory, and power distribution status. |
| SPRIF-MIB | Manages SAGEM SPRIF radio interface configuration, link quality metrics, and operational status. |
| XCONNECTION-MIB | Manages SAGEM cross-connection parameters for ATM and circuit emulation switching fabrics. |