All MIBs › ADR63E1-MIB
Organization: SAGEM-Tolbiac drd/ddp/tmhd
Last Updated: 2002-11-15
Category: Optical and WDM
Description: Manages the Telindus/Spirent ADR 63xE1 optical multiplexer providing tributary configuration and performance monitoring objects.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ADR63E1-MIB?
ADR63E1-MIB is a vendor MIB from Telindus/Spirent for the ADR 63xE1 optical multiplexer, a telecom transmission device that multiplexes multiple E1 tributary circuits onto an optical line, as stated in the module description. It belongs to the telecom transmission-equipment management category, covering tributary configuration and performance monitoring per its short description. Its monitoring value centers on hardware and link status: tributary (E1 channel) configuration and performance counters would reveal error rates or alarm conditions on individual E1 tributaries carried by the multiplexer, letting an operator isolate a degraded circuit within the aggregated optical link. Given the E1 focus, it likely aligns with or complements ITU-T/IETF E1 interface performance-monitoring conventions, adapted to Telindus's specific optical multiplexer hardware. It is deployed in telecom transmission networks where ADR 63xE1 multiplexers aggregate multiple E1 circuits over optical fiber, typically monitored by a carrier's or enterprise's telecom NMS, and technicians can download the ADR63E1-MIB file to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ADR63E1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Telindus/Spirent ADR 63xE1 optical multiplexer
Monitoring Examples
No specific object list is available for this entry beyond the module description confirming it covers ADR63E1 equipment, so exact object names cannot be confirmed. Based on its documented purpose, an operator would typically poll per-tributary configuration and performance-monitoring objects to detect a specific E1 tributary showing elevated error seconds or an alarm condition, isolating a degraded leg of the multiplexed optical circuit, but no concrete OIDs are available for this entry.
What Can Be Monitored
- E1 tributary configuration
- E1 tributary performance/error statistics
- E1 tributary alarm status
Imported Objects
From SAGEM-DR-MIB
| sagemDr | MODULE-IDENTITY |
From SNMPv2-SMI
| MODULE-IDENTITY |
OIDs
RFC description
MIB module specific for ADR63E1 equipment manufactured by SAGEM for network management via SNMP.
Start monitoring Telindus/Spirent ADR-series optical multiplexers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.