ZYXEL-GS2024-MIB

All MIBs › ZYXEL-GS2024-MIB

Organization: ZyXEL

Last Updated: 2004-11-03

Category: ZyXEL ES and GS Switch Platform

Description: Defines ZyXEL GS-2024 24-port Gigabit smart switch specific objects for configuration and status monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZYXEL-GS2024-MIB?

ZYXEL-GS2024-MIB defines proprietary managed objects for the ZyXEL GS-2024, a 24-port Gigabit Ethernet smart switch, centered on an internal event/trap logging subsystem. It exposes a running event table recording sequence numbers, event IDs, names, instance identifiers, severity, timestamps, descriptions, and a service-affecting flag for each logged occurrence. It is used to monitor the operational and fault status of the switch; polling event severity and the service-affecting flag lets an administrator detect critical hardware or link events recorded in the switch's log without waiting for a live trap. Trap notification objects complement the log table so the same events can be pushed proactively to a management station. It is typically deployed on standalone ZyXEL GS-2024 switches in small-to-medium enterprise wiring closets managed via SNMP. Engineers can download the ZYXEL-GS2024-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-GS2024-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZyXEL GS-2024 24-port Gigabit smart switch

Monitoring Examples

eventTable/eventEntry, indexed by eventSeqNum, exposes eventEventId, eventName, eventSeverity, eventSetTime, eventDescription, and eventServAffective for each logged occurrence, letting an admin retrieve the switch's internal event history via SNMP. Polling for entries where eventSeverity is high and eventServAffective is set reveals service-affecting faults such as a link flap or a power event, while trapNotifications under trapInfoObjects push the same events proactively.

What Can Be Monitored

event log entries
event severity
event description
service-affecting flag
event timestamp

Imported Objects

From BRIDGE-MIB

dot1dBasePort

OBJECT-TYPE

From DISMAN-PING-MIB

OperationResponseStatus

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From P-BRIDGE-MIB

EnabledStatus

From Q-BRIDGE-MIB

PortList

From RFC1155-SMI

IpAddress
enterprises

From RFC1213-MIB

DisplayString

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-MIB

sysObjectID

OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
PhysAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using fanRpmCurValue OID:

Select a ZyXEL GS-2024 24-port Gigabit smart switch (event-log severity/service-affecting-fault trap status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type fanRpmCurValue into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the current speed in Revolutions Per Minute (RPM) on the fan. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the speed drops below the level expected for a healthy, spinning fan, since a stalled or slowing fan often precedes overheating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zyxel	1.3.6.1.4.1.890
products	1.3.6.1.4.1.890.1
accessSwitch	1.3.6.1.4.1.890.1.5
esSeries	1.3.6.1.4.1.890.1.5.8
gs2024	1.3.6.1.4.1.890.1.5.8.15
sysInfo	1.3.6.1.4.1.890.1.5.8.15.1
INT sysSwPlatformMajorVers	1.3.6.1.4.1.890.1.5.8.15.1.1	INTEGER	read-only	SW platform major version, e.g. 3.
INT sysSwPlatformMinorVers	1.3.6.1.4.1.890.1.5.8.15.1.2	INTEGER	read-only	SW platform minor version, e.g. 50.
STR sysSwModelString	1.3.6.1.4.1.890.1.5.8.15.1.3	DisplayString	read-only	Model letters, e.g. TJ
INT sysSwVersionControlNbr	1.3.6.1.4.1.890.1.5.8.15.1.4	INTEGER	read-only	Version control number, e.g. 0.
INT sysSwDay	1.3.6.1.4.1.890.1.5.8.15.1.5	INTEGER	read-only	SW compilation day, e.g. 19.
INT sysSwMonth	1.3.6.1.4.1.890.1.5.8.15.1.6	INTEGER	read-only	SW compilation month, e.g. 8.
INT sysSwYear	1.3.6.1.4.1.890.1.5.8.15.1.7	INTEGER	read-only	SW compilation year, e.g. 2004.
INT sysHwMajorVers	1.3.6.1.4.1.890.1.5.8.15.1.8	INTEGER	read-only	HW major version number, e.g. 1.
INT sysHwMinorVers	1.3.6.1.4.1.890.1.5.8.15.1.9	INTEGER	read-only	HW minor version number, e.g. 0.
STR sysSerialNumber	1.3.6.1.4.1.890.1.5.8.15.1.10	DisplayString	read-only	Serial number
rateLimitSetup	1.3.6.1.4.1.890.1.5.8.15.2
ENA rateLimitState	1.3.6.1.4.1.890.1.5.8.15.2.1	EnabledStatus	read-write	Ingress/egress rate limiting enabled/disabled for the switch.
rateLimitPortTable	1.3.6.1.4.1.890.1.5.8.15.2.2		not-accessible
rateLimitPortEntry	1.3.6.1.4.1.890.1.5.8.15.2.2.1		not-accessible	An entry in rateLimitPortTable.
ENA rateLimitPortState	1.3.6.1.4.1.890.1.5.8.15.2.2.1.1	EnabledStatus	read-write	Ingress/egress rate limiting enabled/disabled on the port.
INT rateLimitPortIngRate	1.3.6.1.4.1.890.1.5.8.15.2.2.1.2	INTEGER	read-write	Ingress rate in Mbit/s. The granularity of FE port is between 1 and 100. For GE port, the granularity is between 1 and 1000.
INT rateLimitPortScheme	1.3.6.1.4.1.890.1.5.8.15.2.2.1.3	INTEGER	read-write
brLimitSetup	1.3.6.1.4.1.890.1.5.8.15.3
ENA brLimitState	1.3.6.1.4.1.890.1.5.8.15.3.1	EnabledStatus	read-write	Broadcast/multicast/DLF rate limiting enabled/disabled for the switch.
INT brLimitType	1.3.6.1.4.1.890.1.5.8.15.3.2	INTEGER	read-write	0: Broadcast Only, 1: Broadcast and multicast, 2: Broadcast and unknown unicast, 3: Broadcast, multicast and unknown unicast.
INT brLimitPktLimit	1.3.6.1.4.1.890.1.5.8.15.3.3	INTEGER	read-write
brLimitPortTable	1.3.6.1.4.1.890.1.5.8.15.3.4		not-accessible
brLimitPortEntry	1.3.6.1.4.1.890.1.5.8.15.3.4.1		not-accessible	An entry in brLimitPortTable.
ENA brLimitPortState	1.3.6.1.4.1.890.1.5.8.15.3.4.1.1	EnabledStatus	read-write
portSecuritySetup	1.3.6.1.4.1.890.1.5.8.15.4
ENA portSecurityState	1.3.6.1.4.1.890.1.5.8.15.4.1	EnabledStatus	read-write
portSecurityPortTable	1.3.6.1.4.1.890.1.5.8.15.4.2		not-accessible
portSecurityPortEntry	1.3.6.1.4.1.890.1.5.8.15.4.2.1		not-accessible	An entry in portSecurityPortTable.
ENA portSecurityPortState	1.3.6.1.4.1.890.1.5.8.15.4.2.1.1	EnabledStatus	read-write	Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynamic MAC address frames up to the number specified by portSecurityPortCount object.
POR portSecurityMacFreeze	1.3.6.1.4.1.890.1.5.8.15.4.3	PortList	read-write
vlanTrunkSetup	1.3.6.1.4.1.890.1.5.8.15.5
vlanTrunkPortTable	1.3.6.1.4.1.890.1.5.8.15.5.1		not-accessible
vlanTrunkPortEntry	1.3.6.1.4.1.890.1.5.8.15.5.1.1		not-accessible	An entry in vlanTrunkPortTable.
ENA vlanTrunkPortState	1.3.6.1.4.1.890.1.5.8.15.5.1.1.1	EnabledStatus	read-write	VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch.
radius8021xSetup	1.3.6.1.4.1.890.1.5.8.15.6
INT radiusLoginPrecedence	1.3.6.1.4.1.890.1.5.8.15.6.1	INTEGER	read-write	1. Local Only 2. Local then RADIUS 3. RADIUS Only
radiusAnd8021xServer	1.3.6.1.4.1.890.1.5.8.15.6.2
IP radiusIpAddr	1.3.6.1.4.1.890.1.5.8.15.6.2.1	IpAddress	read-write	The IP address of the RADIUS server.
INT radiusUdpPort	1.3.6.1.4.1.890.1.5.8.15.6.2.2	INTEGER	read-write	The UDP port of the RADIUS server.
STR radiusSharedSecret	1.3.6.1.4.1.890.1.5.8.15.6.2.3	DisplayString	read-write	Shared secret used for RADIUS and network eleemnt authentication.
ENA portAuthState	1.3.6.1.4.1.890.1.5.8.15.6.3	EnabledStatus	read-write	802.1x port authentication enabled/disabled for the switch.
portAuthTable	1.3.6.1.4.1.890.1.5.8.15.6.4		not-accessible
portAuthEntry	1.3.6.1.4.1.890.1.5.8.15.6.4.1		not-accessible	An entry in portAuthTable.
ENA portAuthEntryState	1.3.6.1.4.1.890.1.5.8.15.6.4.1.1	EnabledStatus	read-write	802.1x port authentication enabled or disabled on the port.
ENA portReAuthEntryState	1.3.6.1.4.1.890.1.5.8.15.6.4.1.2	EnabledStatus	read-write	802.1x port re-authentication enabled or disabled on the port.
INT portReAuthEntryTimer	1.3.6.1.4.1.890.1.5.8.15.6.4.1.3	INTEGER	read-write	Re-authentication timer in seconds.
hwMonitorInfo	1.3.6.1.4.1.890.1.5.8.15.7
fanRpmTable	1.3.6.1.4.1.890.1.5.8.15.7.1		not-accessible
fanRpmEntry	1.3.6.1.4.1.890.1.5.8.15.7.1.1		not-accessible	An entry in fanRpmTable.
INT fanRpmIndex	1.3.6.1.4.1.890.1.5.8.15.7.1.1.1	INTEGER	read-only	Index of FAN.
INT fanRpmCurValueEx	1.3.6.1.4.1.890.1.5.8.15.7.1.1.2	INTEGER	read-only	Current speed in Revolutions Per Minute (RPM) on the fan.
INT fanRpmMaxValue	1.3.6.1.4.1.890.1.5.8.15.7.1.1.3	INTEGER	read-only	Maximum speed measured in Revolutions Per Minute (RPM) on the fan.
INT fanRpmMinValue	1.3.6.1.4.1.890.1.5.8.15.7.1.1.4	INTEGER	read-only	Minimum speed measured in Revolutions Per Minute (RPM) on the fan.
INT fanRpmLowThresh	1.3.6.1.4.1.890.1.5.8.15.7.1.1.5	INTEGER	read-only	The minimum speed at which a normal fan should work.
STR fanRpmDescr	1.3.6.1.4.1.890.1.5.8.15.7.1.1.6	DisplayString	read-only	'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed.
tempTable	1.3.6.1.4.1.890.1.5.8.15.7.2		not-accessible
tempEntry	1.3.6.1.4.1.890.1.5.8.15.7.2.1		not-accessible	An entry in tempTable.
INT tempIndex	1.3.6.1.4.1.890.1.5.8.15.7.2.1.1	INTEGER	read-only	Index of temperature unit. 1:MAC, 2:CPU, 3:PHY
INT tempCurValue	1.3.6.1.4.1.890.1.5.8.15.7.2.1.2	INTEGER	read-only	The current temperature measured at this sensor.
INT tempMaxValue	1.3.6.1.4.1.890.1.5.8.15.7.2.1.3	INTEGER	read-only	The maximum temperature measured at this sensor.
INT tempMinValue	1.3.6.1.4.1.890.1.5.8.15.7.2.1.4	INTEGER	read-only	The minimum temperature measured at this sensor.
INT tempHighThresh	1.3.6.1.4.1.890.1.5.8.15.7.2.1.5	INTEGER	read-only	The upper temperature limit at this sensor.
STR tempDescr	1.3.6.1.4.1.890.1.5.8.15.7.2.1.6	DisplayString	read-only	'Normal' indicates temperatures below the threshold and 'Error' for those above.
voltageTable	1.3.6.1.4.1.890.1.5.8.15.7.3		not-accessible
voltageEntry	1.3.6.1.4.1.890.1.5.8.15.7.3.1		not-accessible	An entry in voltageTable.
INT voltageIndex	1.3.6.1.4.1.890.1.5.8.15.7.3.1.1	INTEGER	read-only	Index of voltage.
INT voltageCurValue	1.3.6.1.4.1.890.1.5.8.15.7.3.1.2	INTEGER	read-only	The current voltage reading.
INT voltageMaxValue	1.3.6.1.4.1.890.1.5.8.15.7.3.1.3	INTEGER	read-only	The maximum voltage measured at this point.
INT voltageMinValue	1.3.6.1.4.1.890.1.5.8.15.7.3.1.4	INTEGER	read-only	The minimum voltage measured at this point.
INT voltageNominalValue	1.3.6.1.4.1.890.1.5.8.15.7.3.1.5	INTEGER	read-only	The normal voltage at wchich the switch work.
INT voltageLowThresh	1.3.6.1.4.1.890.1.5.8.15.7.3.1.6	INTEGER	read-only	The minimum voltage at which the switch should work.
STR voltageDescr	1.3.6.1.4.1.890.1.5.8.15.7.3.1.7	DisplayString	read-only	'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed.
snmpSetup	1.3.6.1.4.1.890.1.5.8.15.8
STR snmpGetCommunity	1.3.6.1.4.1.890.1.5.8.15.8.1	DisplayString	read-write
STR snmpSetCommunity	1.3.6.1.4.1.890.1.5.8.15.8.2	DisplayString	read-write
STR snmpTrapCommunity	1.3.6.1.4.1.890.1.5.8.15.8.3	DisplayString	read-write
snmpTrapDestTable	1.3.6.1.4.1.890.1.5.8.15.8.4		not-accessible
snmpTrapDestEntry	1.3.6.1.4.1.890.1.5.8.15.8.4.1		not-accessible	An entry in snmpTrapDestTable.
IP snmpTrapDestIP	1.3.6.1.4.1.890.1.5.8.15.8.4.1.1	IpAddress	not-accessible	IP address of trap destination.
ROW snmpTrapDestRowStatus	1.3.6.1.4.1.890.1.5.8.15.8.4.1.2	RowStatus	read-create
dateTimeServerSetup	1.3.6.1.4.1.890.1.5.8.15.9
INT dateTimeServerType	1.3.6.1.4.1.890.1.5.8.15.9.1	INTEGER	read-write	The time service protocol.
IP dateTimeServerIP	1.3.6.1.4.1.890.1.5.8.15.9.2	IpAddress	read-write	IP address of time server.
INT dateTimeZone	1.3.6.1.4.1.890.1.5.8.15.9.3	INTEGER	read-write	The time difference between UTC. Ex: +01
INT dateTimeNewDateYear	1.3.6.1.4.1.890.1.5.8.15.9.4	INTEGER	read-write	The new date in year.
INT dateTimeNewDateMonth	1.3.6.1.4.1.890.1.5.8.15.9.5	INTEGER	read-write	The new date in month.
INT dateTimeNewDateDay	1.3.6.1.4.1.890.1.5.8.15.9.6	INTEGER	read-write	The new date in day.
INT dateTimeNewTimeHour	1.3.6.1.4.1.890.1.5.8.15.9.7	INTEGER	read-write	The new time in hour.
INT dateTimeNewTimeMinute	1.3.6.1.4.1.890.1.5.8.15.9.8	INTEGER	read-write	The new time in minute.
INT dateTimeNewTimeSecond	1.3.6.1.4.1.890.1.5.8.15.9.9	INTEGER	read-write	The new time in second.
sysMgmt	1.3.6.1.4.1.890.1.5.8.15.10
INT sysMgmtConfigSave	1.3.6.1.4.1.890.1.5.8.15.10.1	INTEGER	read-write	If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config will be written to the booting one.
INT sysMgmtBootupConfig	1.3.6.1.4.1.890.1.5.8.15.10.2	INTEGER	read-write	The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can change the value of write index by CLI / MIB.
INT sysMgmtReboot	1.3.6.1.4.1.890.1.5.8.15.10.3	INTEGER	read-write	Reboot switch from SNMP. 1:Reboot, 0:Nothing
INT sysMgmtDefaultConfig	1.3.6.1.4.1.890.1.5.8.15.10.4	INTEGER	read-write	Erase running config and reset to default.
INT sysMgmtLastActionStatus	1.3.6.1.4.1.890.1.5.8.15.10.5	INTEGER	read-only	Display status of last mgmt action.
BIT sysMgmtSystemStatus	1.3.6.1.4.1.890.1.5.8.15.10.6	Bits	read-only	This variable indicates the status of the system. The sysMgmtAlarmStatus is a bit map represented a sum, therefore, it can represent multiple defects simultaneously. The sysNoDefect should be set if and only if no other flag is set. The various bit positions are: 0 sysAlarmDetected 1 sysTemperatureError 2 sysFanRPMError 3 sysVoltageRangeError
INT sysMgmtCPUUsage	1.3.6.1.4.1.890.1.5.8.15.10.7	INTEGER	read-only	Show device CPU load in %, it's the snapshot of CPU load when getting the values.
layer2Setup	1.3.6.1.4.1.890.1.5.8.15.11
INT vlanTypeSetup	1.3.6.1.4.1.890.1.5.8.15.11.1	INTEGER	read-write
ENA igmpSnoopingStateSetup	1.3.6.1.4.1.890.1.5.8.15.11.2	EnabledStatus	read-write
ENA igmpFilteringStateSetup	1.3.6.1.4.1.890.1.5.8.15.11.3	EnabledStatus	read-write
INT unknownMulticastFrameForwarding	1.3.6.1.4.1.890.1.5.8.15.11.4	INTEGER	read-write
ENA stpState	1.3.6.1.4.1.890.1.5.8.15.11.5	EnabledStatus	read-write
ipSetup	1.3.6.1.4.1.890.1.5.8.15.12
IP dnsIpAddress	1.3.6.1.4.1.890.1.5.8.15.12.1	IpAddress	read-write
INT defaultMgmt	1.3.6.1.4.1.890.1.5.8.15.12.2	INTEGER	read-write
inbandIpSetup	1.3.6.1.4.1.890.1.5.8.15.12.3
INT inbandIpType	1.3.6.1.4.1.890.1.5.8.15.12.3.1	INTEGER	read-write
INT inbandVid	1.3.6.1.4.1.890.1.5.8.15.12.3.2	INTEGER	read-write
IP inbandStaticIp	1.3.6.1.4.1.890.1.5.8.15.12.3.3	IpAddress	read-write
IP inbandStaticSubnetMask	1.3.6.1.4.1.890.1.5.8.15.12.3.4	IpAddress	read-write
IP inbandStaticGateway	1.3.6.1.4.1.890.1.5.8.15.12.3.5	IpAddress	read-write
outOfBandIpSetup	1.3.6.1.4.1.890.1.5.8.15.12.4
IP outOfBandIp	1.3.6.1.4.1.890.1.5.8.15.12.4.1	IpAddress	read-write
IP outOfBandSubnetMask	1.3.6.1.4.1.890.1.5.8.15.12.4.2	IpAddress	read-write
IP outOfBandGateway	1.3.6.1.4.1.890.1.5.8.15.12.4.3	IpAddress	read-write
INT maxNumOfInbandIp	1.3.6.1.4.1.890.1.5.8.15.12.5	INTEGER	read-only
inbandIpTable	1.3.6.1.4.1.890.1.5.8.15.12.6		not-accessible
inbandIpEntry	1.3.6.1.4.1.890.1.5.8.15.12.6.1		not-accessible	An entry in inbandIpTable.
IP inbandEntryIp	1.3.6.1.4.1.890.1.5.8.15.12.6.1.1	IpAddress	read-write
IP inbandEntrySubnetMask	1.3.6.1.4.1.890.1.5.8.15.12.6.1.2	IpAddress	read-write
IP inbandEntryGateway	1.3.6.1.4.1.890.1.5.8.15.12.6.1.3	IpAddress	read-write
INT inbandEntryVid	1.3.6.1.4.1.890.1.5.8.15.12.6.1.4	INTEGER	read-write
ENA inbandEntryManageable	1.3.6.1.4.1.890.1.5.8.15.12.6.1.5	EnabledStatus	read-write
ROW inbandEntryRowStatus	1.3.6.1.4.1.890.1.5.8.15.12.6.1.6	RowStatus	read-create
mirrorSetup	1.3.6.1.4.1.890.1.5.8.15.13
ENA mirrorState	1.3.6.1.4.1.890.1.5.8.15.13.1	EnabledStatus	read-write
INT mirrorMonitorPort	1.3.6.1.4.1.890.1.5.8.15.13.2	INTEGER	read-write
INT mirrorMirroredPort	1.3.6.1.4.1.890.1.5.8.15.13.3	INTEGER	read-write
INT mirrorDirection	1.3.6.1.4.1.890.1.5.8.15.13.4	INTEGER	read-write
aggrSetup	1.3.6.1.4.1.890.1.5.8.15.14
ENA aggrState	1.3.6.1.4.1.890.1.5.8.15.14.1	EnabledStatus	read-write
INT aggrSystemPriority	1.3.6.1.4.1.890.1.5.8.15.14.2	INTEGER	read-write
aggrGroupTable	1.3.6.1.4.1.890.1.5.8.15.14.3		not-accessible
aggrGroupEntry	1.3.6.1.4.1.890.1.5.8.15.14.3.1		not-accessible	An entry in aggrGroupTable.
INT aggrGroupIndex	1.3.6.1.4.1.890.1.5.8.15.14.3.1.1	INTEGER	read-only
ENA aggrGroupState	1.3.6.1.4.1.890.1.5.8.15.14.3.1.2	EnabledStatus	read-write
ENA aggrGroupDynamicState	1.3.6.1.4.1.890.1.5.8.15.14.3.1.3	EnabledStatus	read-write
aggrPortTable	1.3.6.1.4.1.890.1.5.8.15.14.4		not-accessible
aggrPortEntry	1.3.6.1.4.1.890.1.5.8.15.14.4.1		not-accessible	An entry in aggrPortTable.
INT aggrPortGroup	1.3.6.1.4.1.890.1.5.8.15.14.4.1.1	INTEGER	read-write
INT aggrPortDynamicStateTimeout	1.3.6.1.4.1.890.1.5.8.15.14.4.1.2	INTEGER	read-write
accessCtlSetup	1.3.6.1.4.1.890.1.5.8.15.15
accessCtlTable	1.3.6.1.4.1.890.1.5.8.15.15.1		not-accessible
accessCtlEntry	1.3.6.1.4.1.890.1.5.8.15.15.1.1		not-accessible	An entry in accessCtlTable.
INT accessCtlService	1.3.6.1.4.1.890.1.5.8.15.15.1.1.1	INTEGER	read-only
ENA accessCtlEnable	1.3.6.1.4.1.890.1.5.8.15.15.1.1.2	EnabledStatus	read-write
INT accessCtlServicePort	1.3.6.1.4.1.890.1.5.8.15.15.1.1.3	INTEGER	read-write
INT accessCtlTimeout	1.3.6.1.4.1.890.1.5.8.15.15.1.1.4	INTEGER	read-write
securedClientTable	1.3.6.1.4.1.890.1.5.8.15.15.2		not-accessible
securedClientEntry	1.3.6.1.4.1.890.1.5.8.15.15.2.1		not-accessible	An entry in securedClientTable.
INT securedClientIndex	1.3.6.1.4.1.890.1.5.8.15.15.2.1.1	INTEGER	read-only
ENA securedClientEnable	1.3.6.1.4.1.890.1.5.8.15.15.2.1.2	EnabledStatus	read-write
IP securedClientStartIp	1.3.6.1.4.1.890.1.5.8.15.15.2.1.3	IpAddress	read-write
IP securedClientEndIp	1.3.6.1.4.1.890.1.5.8.15.15.2.1.4	IpAddress	read-write
BIT securedClientService	1.3.6.1.4.1.890.1.5.8.15.15.2.1.5	Bits	read-write	Bit 0:Telnet, Bit 1:FTP, Bit 2:Web, Bit 3:ICMP, Bit 4:SNMP
queuingMethodSetup	1.3.6.1.4.1.890.1.5.8.15.16
INT queuingMethodMode	1.3.6.1.4.1.890.1.5.8.15.16.1	INTEGER	read-write
queuingMethodTable	1.3.6.1.4.1.890.1.5.8.15.16.2		not-accessible
queuingMethodEntry	1.3.6.1.4.1.890.1.5.8.15.16.2.1		not-accessible	An entry in queuingMethodTable.
INT queuingMethodQueue	1.3.6.1.4.1.890.1.5.8.15.16.2.1.1	INTEGER	read-only	0...3
INT queuingMethodWeight	1.3.6.1.4.1.890.1.5.8.15.16.2.1.2	INTEGER	read-write	0...15
staticRouteSetup	1.3.6.1.4.1.890.1.5.8.15.17
INT maxNumberOfStaticRoutes	1.3.6.1.4.1.890.1.5.8.15.17.1	INTEGER	read-only
staticRouteTable	1.3.6.1.4.1.890.1.5.8.15.17.2		not-accessible
staticRouteEntry	1.3.6.1.4.1.890.1.5.8.15.17.2.1		not-accessible	An entry in staticRouteTable.
STR staticRouteName	1.3.6.1.4.1.890.1.5.8.15.17.2.1.1	DisplayString	read-write
IP staticRouteIp	1.3.6.1.4.1.890.1.5.8.15.17.2.1.2	IpAddress	not-accessible
IP staticRouteMask	1.3.6.1.4.1.890.1.5.8.15.17.2.1.3	IpAddress	not-accessible
IP staticRouteGateway	1.3.6.1.4.1.890.1.5.8.15.17.2.1.4	IpAddress	read-write
INT staticRouteMetric	1.3.6.1.4.1.890.1.5.8.15.17.2.1.5	INTEGER	read-write
ROW staticRouteRowStatus	1.3.6.1.4.1.890.1.5.8.15.17.2.1.6	RowStatus	read-create
arpInfo	1.3.6.1.4.1.890.1.5.8.15.18
arpTable	1.3.6.1.4.1.890.1.5.8.15.18.1		not-accessible
arpEntry	1.3.6.1.4.1.890.1.5.8.15.18.1.1		not-accessible	An entry in arpTable.
INT arpIndex	1.3.6.1.4.1.890.1.5.8.15.18.1.1.1	INTEGER	read-only
IP arpIpAddr	1.3.6.1.4.1.890.1.5.8.15.18.1.1.2	IpAddress	read-only
PHY arpMacAddr	1.3.6.1.4.1.890.1.5.8.15.18.1.1.3	PhysAddress	read-only
INT arpMacVid	1.3.6.1.4.1.890.1.5.8.15.18.1.1.4	INTEGER	read-only
INT arpType	1.3.6.1.4.1.890.1.5.8.15.18.1.1.5	INTEGER	read-only	1-static, 2-dynamic
portOpModeSetup	1.3.6.1.4.1.890.1.5.8.15.19
portOpModePortTable	1.3.6.1.4.1.890.1.5.8.15.19.1		not-accessible
portOpModePortEntry	1.3.6.1.4.1.890.1.5.8.15.19.1.1		not-accessible	An entry in portOpModePortTable.
INT portOpModePortSpeedDuplex	1.3.6.1.4.1.890.1.5.8.15.19.1.1.1	INTEGER	read-write
INT portOpModePortFlowCntl	1.3.6.1.4.1.890.1.5.8.15.19.1.1.2	INTEGER	read-write
OCT portOpModePortName	1.3.6.1.4.1.890.1.5.8.15.19.1.1.3	OCTET STRING	read-write
INT portOpModePortModuleType	1.3.6.1.4.1.890.1.5.8.15.19.1.1.4	INTEGER	read-only
INT portOpModePortLinkUpType	1.3.6.1.4.1.890.1.5.8.15.19.1.1.5	INTEGER	read-only
ENA portOpModePortIntrusionLock	1.3.6.1.4.1.890.1.5.8.15.19.1.1.6	EnabledStatus	read-write
INT portOpModePortLBTestStatus	1.3.6.1.4.1.890.1.5.8.15.19.1.1.7	INTEGER	read-only	This entry display latest loopback test status of port while performing loopback test.
INT portOpModePortJumboFrame	1.3.6.1.4.1.890.1.5.8.15.19.1.1.8	INTEGER	read-write
portBasedVlanSetup	1.3.6.1.4.1.890.1.5.8.15.20
portBasedVlanPortListTable	1.3.6.1.4.1.890.1.5.8.15.20.1		not-accessible
portBasedVlanPortListEntry	1.3.6.1.4.1.890.1.5.8.15.20.1.1		not-accessible	An entry in portBasedVlanPortListTable.
POR portBasedVlanPortListMembers	1.3.6.1.4.1.890.1.5.8.15.20.1.1.1	PortList	read-write
multicastPortSetup	1.3.6.1.4.1.890.1.5.8.15.21
multicastPortTable	1.3.6.1.4.1.890.1.5.8.15.21.1		not-accessible
multicastPortEntry	1.3.6.1.4.1.890.1.5.8.15.21.1.1		not-accessible	An entry in multicastPortTable.
ENA multicastPortImmediateLeave	1.3.6.1.4.1.890.1.5.8.15.21.1.1.1	EnabledStatus	read-write
ENA multicastPortMaxGroupLimited	1.3.6.1.4.1.890.1.5.8.15.21.1.1.2	EnabledStatus	read-write
INT multicastPortMaxOfGroup	1.3.6.1.4.1.890.1.5.8.15.21.1.1.3	INTEGER	read-write	0..255
STR multicastPortIgmpFilteringProfile	1.3.6.1.4.1.890.1.5.8.15.21.1.1.4	DisplayString	read-write
multicastStatus	1.3.6.1.4.1.890.1.5.8.15.22
multicastStatusTable	1.3.6.1.4.1.890.1.5.8.15.22.1		not-accessible
multicastStatusEntry	1.3.6.1.4.1.890.1.5.8.15.22.1.1		not-accessible	An entry in multicastStatusTable.
INT multicastStatusIndex	1.3.6.1.4.1.890.1.5.8.15.22.1.1.1	INTEGER	read-only
INT multicastStatusVlanID	1.3.6.1.4.1.890.1.5.8.15.22.1.1.2	INTEGER	read-only
INT multicastStatusPort	1.3.6.1.4.1.890.1.5.8.15.22.1.1.3	INTEGER	read-only
IP multicastStatusGroup	1.3.6.1.4.1.890.1.5.8.15.22.1.1.4	IpAddress	read-only
igmpFilteringProfileSetup	1.3.6.1.4.1.890.1.5.8.15.23
INT igmpFilteringMaxNumberOfProfile	1.3.6.1.4.1.890.1.5.8.15.23.1	INTEGER	read-only
igmpFilteringProfileTable	1.3.6.1.4.1.890.1.5.8.15.23.2		not-accessible
igmpFilteringProfileEntry	1.3.6.1.4.1.890.1.5.8.15.23.2.1		not-accessible	An entry in igmpFilteringProfileTable.
STR igmpFilteringProfileName	1.3.6.1.4.1.890.1.5.8.15.23.2.1.1	DisplayString	read-only
IP igmpFilteringProfileStartAddress	1.3.6.1.4.1.890.1.5.8.15.23.2.1.2	IpAddress	read-only
IP igmpFilteringProfileEndAddress	1.3.6.1.4.1.890.1.5.8.15.23.2.1.3	IpAddress	read-only
ROW igmpFilteringProfileRowStatus	1.3.6.1.4.1.890.1.5.8.15.23.2.1.4	RowStatus	read-create
mvrSetup	1.3.6.1.4.1.890.1.5.8.15.24
INT maxNumberOfMVR	1.3.6.1.4.1.890.1.5.8.15.24.1	INTEGER	read-only
mvrTable	1.3.6.1.4.1.890.1.5.8.15.24.2		not-accessible
mvrEntry	1.3.6.1.4.1.890.1.5.8.15.24.2.1		not-accessible	An entry in mvrTable.
INT mvrVlanID	1.3.6.1.4.1.890.1.5.8.15.24.2.1.1	INTEGER	read-only	1..4094
STR mvrName	1.3.6.1.4.1.890.1.5.8.15.24.2.1.2	DisplayString	read-write
INT mvrMode	1.3.6.1.4.1.890.1.5.8.15.24.2.1.3	INTEGER	read-write
ROW mvrRowStatus	1.3.6.1.4.1.890.1.5.8.15.24.2.1.4	RowStatus	read-create
mvrPortTable	1.3.6.1.4.1.890.1.5.8.15.24.3		not-accessible
mvrPortEntry	1.3.6.1.4.1.890.1.5.8.15.24.3.1		not-accessible	An entry in mvrPortTable.
INT mvrPortRole	1.3.6.1.4.1.890.1.5.8.15.24.3.1.1	INTEGER	read-write
ENA mvrPortTagging	1.3.6.1.4.1.890.1.5.8.15.24.3.1.2	EnabledStatus	read-write
INT maxNumberOfMvrGroup	1.3.6.1.4.1.890.1.5.8.15.24.4	INTEGER	read-only
mvrGroupTable	1.3.6.1.4.1.890.1.5.8.15.24.5		not-accessible
mvrGroupEntry	1.3.6.1.4.1.890.1.5.8.15.24.5.1		not-accessible	An entry in mvrGroupTable.
STR mvrGroupName	1.3.6.1.4.1.890.1.5.8.15.24.5.1.1	DisplayString	read-only
IP mvrGroupStartAddress	1.3.6.1.4.1.890.1.5.8.15.24.5.1.2	IpAddress	read-write
IP mvrGroupEndAddress	1.3.6.1.4.1.890.1.5.8.15.24.5.1.3	IpAddress	read-write
ROW mvrGroupRowStatus	1.3.6.1.4.1.890.1.5.8.15.24.5.1.4	RowStatus	read-create
diffservSetup	1.3.6.1.4.1.890.1.5.8.15.25
ENA diffservState	1.3.6.1.4.1.890.1.5.8.15.25.1	EnabledStatus	read-write
diffservMapTable	1.3.6.1.4.1.890.1.5.8.15.25.2		not-accessible
diffservMapEntry	1.3.6.1.4.1.890.1.5.8.15.25.2.1		not-accessible	An entry in diffservMapTable.
INT diffservMapDscp	1.3.6.1.4.1.890.1.5.8.15.25.2.1.1	INTEGER	read-only	0-63
INT diffservMapPriority	1.3.6.1.4.1.890.1.5.8.15.25.2.1.2	INTEGER	read-write	0-7
clusterSetup	1.3.6.1.4.1.890.1.5.8.15.26
clusterManager	1.3.6.1.4.1.890.1.5.8.15.26.1
INT clusterMaxNumOfManager	1.3.6.1.4.1.890.1.5.8.15.26.1.1	INTEGER	read-only
clusterManagerTable	1.3.6.1.4.1.890.1.5.8.15.26.1.2		not-accessible
clusterManagerEntry	1.3.6.1.4.1.890.1.5.8.15.26.1.2.1		not-accessible	An entry in clusterManagerTable.
INT clusterManagerVid	1.3.6.1.4.1.890.1.5.8.15.26.1.2.1.1	INTEGER	read-only
STR clusterManagerName	1.3.6.1.4.1.890.1.5.8.15.26.1.2.1.2	DisplayString	read-write
ROW clusterManagerRowStatus	1.3.6.1.4.1.890.1.5.8.15.26.1.2.1.3	RowStatus	read-create
clusterMembers	1.3.6.1.4.1.890.1.5.8.15.26.2
INT clusterMaxNumOfMember	1.3.6.1.4.1.890.1.5.8.15.26.2.1	INTEGER	read-only
clusterMemberTable	1.3.6.1.4.1.890.1.5.8.15.26.2.2		not-accessible
clusterMemberEntry	1.3.6.1.4.1.890.1.5.8.15.26.2.2.1		not-accessible	An entry in clusterMemberTable.
STR clusterMemberMac	1.3.6.1.4.1.890.1.5.8.15.26.2.2.1.1	DisplayString	not-accessible
STR clusterMemberName	1.3.6.1.4.1.890.1.5.8.15.26.2.2.1.2	DisplayString	read-only
STR clusterMemberModel	1.3.6.1.4.1.890.1.5.8.15.26.2.2.1.3	DisplayString	read-only
STR clusterMemberPassword	1.3.6.1.4.1.890.1.5.8.15.26.2.2.1.4	DisplayString	read-write
ROW clusterMemberRowStatus	1.3.6.1.4.1.890.1.5.8.15.26.2.2.1.5	RowStatus	read-create
clusterCandidates	1.3.6.1.4.1.890.1.5.8.15.26.3
clusterCandidateTable	1.3.6.1.4.1.890.1.5.8.15.26.3.1		not-accessible
clusterCandidateEntry	1.3.6.1.4.1.890.1.5.8.15.26.3.1.1		not-accessible	An entry in clusterCandidateTable.
STR clusterCandidateMac	1.3.6.1.4.1.890.1.5.8.15.26.3.1.1.1	DisplayString	read-only
STR clusterCandidateName	1.3.6.1.4.1.890.1.5.8.15.26.3.1.1.2	DisplayString	read-only
STR clusterCandidateModel	1.3.6.1.4.1.890.1.5.8.15.26.3.1.1.3	DisplayString	read-only
clusterStatus	1.3.6.1.4.1.890.1.5.8.15.26.4
INT clusterStatusRole	1.3.6.1.4.1.890.1.5.8.15.26.4.1	INTEGER	read-only
STR clusterStatusManager	1.3.6.1.4.1.890.1.5.8.15.26.4.2	DisplayString	read-only
INT clsuterStatusMaxNumOfMember	1.3.6.1.4.1.890.1.5.8.15.26.4.3	INTEGER	read-only
clusterStatusMemberTable	1.3.6.1.4.1.890.1.5.8.15.26.4.4		not-accessible
clusterStatusMemberEntry	1.3.6.1.4.1.890.1.5.8.15.26.4.4.1		not-accessible	An entry in clusterStatusMemberTable.
STR clusterStatusMemberMac	1.3.6.1.4.1.890.1.5.8.15.26.4.4.1.1	DisplayString	read-only
STR clusterStatusMemberName	1.3.6.1.4.1.890.1.5.8.15.26.4.4.1.2	DisplayString	read-only
STR clusterStatusMemberModel	1.3.6.1.4.1.890.1.5.8.15.26.4.4.1.3	DisplayString	read-only
INT clusterStatusMemberStatus	1.3.6.1.4.1.890.1.5.8.15.26.4.4.1.4	INTEGER	read-only
faultMIB	1.3.6.1.4.1.890.1.5.8.15.27			Fault event table definitions
eventObjects	1.3.6.1.4.1.890.1.5.8.15.27.1
eventTable	1.3.6.1.4.1.890.1.5.8.15.27.1.1		not-accessible	A list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault is cleared it is deleted from the event table.
eventEntry	1.3.6.1.4.1.890.1.5.8.15.27.1.1.1		not-accessible	An entry containing information about an event in the event table.
I32 eventSeqNum	1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.1	Integer32	read-only	This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is incremented when - the state of a normal type fault is set on (the same sequence number is present in the events table as well as in the trap that is sent to notify about the fault on event) - delta event occurs (sequence number present in trap message) - the state of a normal type fault is set off (sequence number present in trap that is sent to notify for clearing).
EVE eventEventId	1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.2	EventIdNumber	read-only	This variable represents the event ID which uniquely identifies the event in the entire system.
STR eventName	1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.3	DisplayString	read-only	This variable represents the name of the event, for example 'Ethernet Link Down'
INS eventInstanceType	1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.4	InstanceType	read-only	This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For more details see the textual conventions section. AFFECTS: eventInstanceId, eventInstanceName
STR eventInstanceId	1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.5	DisplayString	read-only	This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceType
STR eventInstanceName	1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.6	DisplayString	read-only	This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstanceType
EVE eventSeverity	1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.7	EventSeverity	read-only	This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention to prevent/reduce system down time. Major events require quick attention and Minor events possibly require some attention. Informational events indicate the occurrence of events that may need to be investigated.
UTC eventSetTime	1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.8	UtcTimeStamp	read-only	This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM.
STR eventDescription	1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.9	DisplayString	read-only	This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no usefull information to report. The maximum length of this string is 255 characters.
EVE eventServAffective	1.3.6.1.4.1.890.1.5.8.15.27.1.1.1.10	EventServiceAffective	read-only	This variable indicates whether the event is service affective or not
faultTrapsMIB	1.3.6.1.4.1.890.1.5.8.15.28			Fault event trap definitions
trapInfoObjects	1.3.6.1.4.1.890.1.5.8.15.28.1
I32 trapRefSeqNum	1.3.6.1.4.1.890.1.5.8.15.28.1.1	Integer32	read-only	Indicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications.
EVE trapPersistence	1.3.6.1.4.1.890.1.5.8.15.28.1.2	EventPersistence	read-only	Indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap notifications.
I32 trapSenderNodeId	1.3.6.1.4.1.890.1.5.8.15.28.1.3	Integer32	read-only	Represents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications.
trapNotifications	1.3.6.1.4.1.890.1.5.8.15.28.2
NTF eventOnTrap	1.3.6.1.4.1.890.1.5.8.15.28.2.1			This trap is used to inform network management system that a delta fault event (events that are automatically cleared) has occured or a normal fault event (not automatically cleared) state has been set on. Objects are used as follows: - eventSeqNum is the sequence number of the event. For normal type of events must equal to the sequence number of the event in the events table. - eventEventId specifies what fault event has occured. - eventName specifies the name of the fault event. - eventSetTime indicates when fault event has occured (delta events) or when fault has been set on (normal events). - eventSeverity reports the severity level of the event. - eventInstanceType indicates what kind of object is faulty. - eventInstanceId specifies what instance is faulty. - eventInstanceName may contain textual description for the faulty object. - eventServAffective specifies whether the event is immediately service affcetive. - eventDescription reports possible additional information about the event. - trapPersistence tells whether this event is a delta or normal event. - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the fault event. For more information see the eventTable specification
NTF eventClearedTrap	1.3.6.1.4.1.890.1.5.8.15.28.2.2			This trap is used to inform network management system that a normal type fault event has been cleared (state set off). Objects are used as follows: - eventSeqNum is the sequence number of the this clearing event. Note that the sequence number of the cleared event is reported in the trapRefSeqNum object. - eventEventId specifies what event has been cleared. - eventSetTime indicates when fault event has been cleared. - eventInstanceType indicates what kind of object has been faulty. - eventInstanceId specifies what instance has been faulty. - trapRefSeqNum specifies the sequence number of the cleared event (i.e. the sequence number was assigned for the event in the events table). - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the clearing event. For more information see the eventTable specification

RFC description

ZyXEL GS2024 managed switch system information including hardware/software versions, platform details, and network configuration.

Start monitoring ZyXEL GS-2024 24-port Gigabit smart switch (event-log severity/service-affecting-fault trap status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZYXEL-GS2024-MIB