All MIBs › ZYXEL-GS4012F-MIB
Organization: ZyXEL
Last Updated: 2004-11-03
Category: ZyXEL ES and GS Switch Platform
Description:
Defines hardware and management objects specific to the ZyXEL GS-4012F 12-port Gigabit fiber switch.
Imported Objects
From BRIDGE-MIB
| dot1dBasePort | OBJECT-TYPE |
From DISMAN-PING-MIB
| OperationResponseStatus |
From IF-MIB
| InterfaceIndexOrZero |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From OSPF-MIB
| ospfAddressLessIf | |
| ospfAreaId | OBJECT-TYPE |
| ospfIfIpAddress | |
| ospfLsdbAreaId | |
| ospfLsdbLsid | |
| ospfLsdbRouterId | |
| ospfLsdbType | |
| ospfNbrAddressLessIndex | |
| ospfNbrIpAddr | |
| ospfVirtIfAreaId | |
| ospfVirtIfNeighbor |
From P-BRIDGE-MIB
| EnabledStatus |
From Q-BRIDGE-MIB
| PortList |
From RFC1155-SMI
| IpAddress | |
| enterprises |
From RFC1213-MIB
| DisplayString |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-MIB
| sysObjectID | OBJECT-TYPE |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| MacAddress | |
| RowStatus | |
| StorageType | |
| TEXTUAL-CONVENTION | |
| TruthValue |
What Is ZYXEL-GS4012F-MIB?
ZYXEL-GS4012F-MIB is a ZyXEL private enterprise MIB module written specifically for the GS-4012F, a 12-port Gigabit fiber managed switch, placing it in the Ethernet switching/access-network vendor hardware category. It exposes an event-logging subsystem that records operational occurrences on the switch as structured event records rather than raw traffic counters. Each event entry carries a sequence number, event identifier, name, severity, instance type/ID/name, timestamp, free-text description, and a flag indicating whether the event is service-affecting, making the MIB primarily a software/hardware health and fault log rather than a performance-counter MIB. Administrators use it to monitor device status changes such as link flaps, power or environmental faults, and configuration changes, and to receive corresponding SNMP traps in near real time. It builds on the standard SNMPv2 notification framework for its trap definitions and is typically deployed in metro-Ethernet or enterprise access layers where GS-4012F switches provide fiber uplinks to closets or cabinets. Engineers can download the ZYXEL-GS4012F-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-GS4012F-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- event log entries
- event severity level
- service-affecting fault flag
- event timestamp
- affected port/instance
- trap notifications
Supported Devices
- ZyXEL GS-4012F Gigabit fiber switch
Monitoring Examples
An NMS polls eventTable/eventEntry and watches eventSeqNum increment; a new row with a high eventSeverity and eventServAffective set to true signals a fault the operator should investigate immediately. The eventSetTime and eventDescription columns give a human-readable timestamp and cause, while eventInstanceType/eventInstanceId/eventInstanceName identify which port or hardware instance triggered it. When trapNotifications fires, the trapInfoObjects varbinds mirror the same event row so the trap payload matches the table entry, letting the same event data flow either by polling or by asynchronous notification.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zyxel | 1.3.6.1.4.1.890 | |||
| products | 1.3.6.1.4.1.890.1 | |||
| accessSwitch | 1.3.6.1.4.1.890.1.5 | |||
| esSeries | 1.3.6.1.4.1.890.1.5.8 | |||
| gs4012f | 1.3.6.1.4.1.890.1.5.8.20 | |||
| sysInfo | 1.3.6.1.4.1.890.1.5.8.20.1 | |||
| INT sysSwPlatformMajorVers | 1.3.6.1.4.1.890.1.5.8.20.1.1 | INTEGER | read-only | SW platform major version, e.g. 3. |
| INT sysSwPlatformMinorVers | 1.3.6.1.4.1.890.1.5.8.20.1.2 | INTEGER | read-only | SW platform minor version, e.g. 50. |
| STR sysSwModelString | 1.3.6.1.4.1.890.1.5.8.20.1.3 | DisplayString | read-only | Model letters, e.g. TJ |
| INT sysSwVersionControlNbr | 1.3.6.1.4.1.890.1.5.8.20.1.4 | INTEGER | read-only | Version control number, e.g. 0. |
| INT sysSwDay | 1.3.6.1.4.1.890.1.5.8.20.1.5 | INTEGER | read-only | SW compilation day, e.g. 19. |
| INT sysSwMonth | 1.3.6.1.4.1.890.1.5.8.20.1.6 | INTEGER | read-only | SW compilation month, e.g. 8. |
| INT sysSwYear | 1.3.6.1.4.1.890.1.5.8.20.1.7 | INTEGER | read-only | SW compilation year, e.g. 2004. |
| INT sysHwMajorVers | 1.3.6.1.4.1.890.1.5.8.20.1.8 | INTEGER | read-only | HW major version number, e.g. 1. |
| INT sysHwMinorVers | 1.3.6.1.4.1.890.1.5.8.20.1.9 | INTEGER | read-only | HW minor version number, e.g. 0. |
| STR sysSerialNumber | 1.3.6.1.4.1.890.1.5.8.20.1.10 | DisplayString | read-only | Serial number |
| rateLimitSetup | 1.3.6.1.4.1.890.1.5.8.20.2 | |||
| ENA rateLimitState | 1.3.6.1.4.1.890.1.5.8.20.2.1 | EnabledStatus | read-write | Ingress/egress rate limiting enabled/disabled for the switch. |
| rateLimitPortTable | 1.3.6.1.4.1.890.1.5.8.20.2.2 | not-accessible | ||
| rateLimitPortEntry | 1.3.6.1.4.1.890.1.5.8.20.2.2.1 | not-accessible | An entry in rateLimitPortTable. | |
| ENA rateLimitPortState | 1.3.6.1.4.1.890.1.5.8.20.2.2.1.1 | EnabledStatus | read-write | Ingress/egress rate limiting enabled/disabled on the port. |
| INT rateLimitPortCommitRate | 1.3.6.1.4.1.890.1.5.8.20.2.2.1.2 | INTEGER | read-write | Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000. |
| INT rateLimitPortPeakRate | 1.3.6.1.4.1.890.1.5.8.20.2.2.1.3 | INTEGER | read-write | Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000. |
| INT rateLimitPortEgrRate | 1.3.6.1.4.1.890.1.5.8.20.2.2.1.4 | INTEGER | read-write | Egress rate in Mbit/s. The granularity of FE port is between 1 and 100. For GE port, the granularity is between 1 and 1000. |
| brLimitSetup | 1.3.6.1.4.1.890.1.5.8.20.3 | |||
| ENA brLimitState | 1.3.6.1.4.1.890.1.5.8.20.3.1 | EnabledStatus | read-write | Broadcast/multicast/DLF rate limiting enabled/disabled for the switch. |
| brLimitPortTable | 1.3.6.1.4.1.890.1.5.8.20.3.2 | not-accessible | ||
| brLimitPortEntry | 1.3.6.1.4.1.890.1.5.8.20.3.2.1 | not-accessible | An entry in brLimitPortTable. | |
| ENA brLimitPortBrState | 1.3.6.1.4.1.890.1.5.8.20.3.2.1.1 | EnabledStatus | read-write | Broadcast rate limiting enabled/disabled on the port. |
| INT brLimitPortBrRate | 1.3.6.1.4.1.890.1.5.8.20.3.2.1.2 | INTEGER | read-write | Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
| ENA brLimitPortMcState | 1.3.6.1.4.1.890.1.5.8.20.3.2.1.3 | EnabledStatus | read-write | Multicast rate limiting enabled/disabled on the port. |
| INT brLimitPortMcRate | 1.3.6.1.4.1.890.1.5.8.20.3.2.1.4 | INTEGER | read-write | AAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
| ENA brLimitPortDlfState | 1.3.6.1.4.1.890.1.5.8.20.3.2.1.5 | EnabledStatus | read-write | Destination lookup failure frames rate limiting enabled/disabled on the port. |
| INT brLimitPortDlfRate | 1.3.6.1.4.1.890.1.5.8.20.3.2.1.6 | INTEGER | read-write | Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143. |
| portSecuritySetup | 1.3.6.1.4.1.890.1.5.8.20.4 | |||
| ENA portSecurityState | 1.3.6.1.4.1.890.1.5.8.20.4.1 | EnabledStatus | read-write | |
| portSecurityPortTable | 1.3.6.1.4.1.890.1.5.8.20.4.2 | not-accessible | ||
| portSecurityPortEntry | 1.3.6.1.4.1.890.1.5.8.20.4.2.1 | not-accessible | An entry in portSecurityPortTable. | |
| ENA portSecurityPortState | 1.3.6.1.4.1.890.1.5.8.20.4.2.1.1 | EnabledStatus | read-write | Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynamic MAC address frames up to the number specified by portSecurityPortCount object. |
| ENA portSecurityPortLearnState | 1.3.6.1.4.1.890.1.5.8.20.4.2.1.2 | EnabledStatus | read-write | MAC address learning enabled/disable on the port. |
| INT portSecurityPortCount | 1.3.6.1.4.1.890.1.5.8.20.4.2.1.3 | INTEGER | read-write | Number of (dynamic) MAC addresses that may be learned on the port. |
| POR portSecurityMacFreeze | 1.3.6.1.4.1.890.1.5.8.20.4.3 | PortList | read-write | |
| vlanTrunkSetup | 1.3.6.1.4.1.890.1.5.8.20.5 | |||
| vlanTrunkPortTable | 1.3.6.1.4.1.890.1.5.8.20.5.1 | not-accessible | ||
| vlanTrunkPortEntry | 1.3.6.1.4.1.890.1.5.8.20.5.1.1 | not-accessible | An entry in vlanTrunkPortTable. | |
| ENA vlanTrunkPortState | 1.3.6.1.4.1.890.1.5.8.20.5.1.1.1 | EnabledStatus | read-write | VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch. |
| ctlProtTransSetup | 1.3.6.1.4.1.890.1.5.8.20.6 | |||
| ENA ctlProtTransState | 1.3.6.1.4.1.890.1.5.8.20.6.1 | EnabledStatus | read-write | Bridge control protocol transparency enabled/disabled for the switch |
| ctlProtTransTunnelPortTable | 1.3.6.1.4.1.890.1.5.8.20.6.2 | not-accessible | ||
| ctlProtTransTunnelPortEntry | 1.3.6.1.4.1.890.1.5.8.20.6.2.1 | not-accessible | An entry in ctlProtTransTunnelPortTable. | |
| INT ctlProtTransTunnelMode | 1.3.6.1.4.1.890.1.5.8.20.6.2.1.1 | INTEGER | read-write | Bridge control protocol transparency mode for the port. Modes: Peer(0), Tunnel(1), Discard(2), Network(3) |
| vlanStackSetup | 1.3.6.1.4.1.890.1.5.8.20.7 | |||
| ENA vlanStackState | 1.3.6.1.4.1.890.1.5.8.20.7.1 | EnabledStatus | read-write | VLAN Stacking enabled/disabled for the switch. |
| INT vlanStackTpid | 1.3.6.1.4.1.890.1.5.8.20.7.2 | INTEGER | read-write | SP TPID in hex format, e.g. 8100. |
| vlanStackPortTable | 1.3.6.1.4.1.890.1.5.8.20.7.3 | not-accessible | ||
| vlanStackPortEntry | 1.3.6.1.4.1.890.1.5.8.20.7.3.1 | not-accessible | An entry in vlanStackPortTable. | |
| INT vlanStackPortMode | 1.3.6.1.4.1.890.1.5.8.20.7.3.1.1 | INTEGER | read-write | Mode of the port.Set Access mode to have the switch add the SP TPID tag to all incoming frames received on this port. Set Access mode for ingress ports at the edge of the service provider's network. Set Tunnel mode (available for Gigabit ports only) for egress ports at the edge of the service provider's network. In order to support VLAN stacking on a port, the port must be able to allow frames of 1526 Bytes (1522 Bytes + 4 Bytes for the second tag) to pass through it. Access (0), tunnel (1) |
| INT vlanStackPortVid | 1.3.6.1.4.1.890.1.5.8.20.7.3.1.2 | INTEGER | read-write | VLAN ID used in service provider tag. |
| INT vlanStackPortPrio | 1.3.6.1.4.1.890.1.5.8.20.7.3.1.3 | INTEGER | read-write | Priority value for service provider tag. 0 is the lowest priority level and 7 is the highest. |
| radius8021xSetup | 1.3.6.1.4.1.890.1.5.8.20.8 | |||
| INT radiusLoginPrecedence | 1.3.6.1.4.1.890.1.5.8.20.8.1 | INTEGER | read-write | 1. Local Only 2. Local then RADIUS 3. RADIUS Only |
| radiusAnd8021xServer | 1.3.6.1.4.1.890.1.5.8.20.8.2 | |||
| IP radiusIpAddr | 1.3.6.1.4.1.890.1.5.8.20.8.2.1 | IpAddress | read-write | The IP address of the RADIUS server. |
| INT radiusUdpPort | 1.3.6.1.4.1.890.1.5.8.20.8.2.2 | INTEGER | read-write | The UDP port of the RADIUS server. |
| STR radiusSharedSecret | 1.3.6.1.4.1.890.1.5.8.20.8.2.3 | DisplayString | read-write | Shared secret used for RADIUS and network eleemnt authentication. |
| ENA portAuthState | 1.3.6.1.4.1.890.1.5.8.20.8.3 | EnabledStatus | read-write | 802.1x port authentication enabled/disabled for the switch. |
| portAuthTable | 1.3.6.1.4.1.890.1.5.8.20.8.4 | not-accessible | ||
| portAuthEntry | 1.3.6.1.4.1.890.1.5.8.20.8.4.1 | not-accessible | An entry in portAuthTable. | |
| ENA portAuthEntryState | 1.3.6.1.4.1.890.1.5.8.20.8.4.1.1 | EnabledStatus | read-write | 802.1x port authentication enabled or disabled on the port. |
| ENA portReAuthEntryState | 1.3.6.1.4.1.890.1.5.8.20.8.4.1.2 | EnabledStatus | read-write | 802.1x port re-authentication enabled or disabled on the port. |
| INT portReAuthEntryTimer | 1.3.6.1.4.1.890.1.5.8.20.8.4.1.3 | INTEGER | read-write | Re-authentication timer in seconds. |
| hwMonitorInfo | 1.3.6.1.4.1.890.1.5.8.20.9 | |||
| fanRpmTable | 1.3.6.1.4.1.890.1.5.8.20.9.1 | not-accessible | ||
| fanRpmEntry | 1.3.6.1.4.1.890.1.5.8.20.9.1.1 | not-accessible | An entry in fanRpmTable. | |
| INT fanRpmIndex | 1.3.6.1.4.1.890.1.5.8.20.9.1.1.1 | INTEGER | read-only | Index of FAN. |
| INT fanRpmCurValue | 1.3.6.1.4.1.890.1.5.8.20.9.1.1.2 | INTEGER | read-only | Current speed in Revolutions Per Minute (RPM) on the fan. |
| INT fanRpmMaxValue | 1.3.6.1.4.1.890.1.5.8.20.9.1.1.3 | INTEGER | read-only | Maximum speed measured in Revolutions Per Minute (RPM) on the fan. |
| INT fanRpmMinValue | 1.3.6.1.4.1.890.1.5.8.20.9.1.1.4 | INTEGER | read-only | Minimum speed measured in Revolutions Per Minute (RPM) on the fan. |
| INT fanRpmLowThresh | 1.3.6.1.4.1.890.1.5.8.20.9.1.1.5 | INTEGER | read-only | The minimum speed at which a normal fan should work. |
| STR fanRpmDescr | 1.3.6.1.4.1.890.1.5.8.20.9.1.1.6 | DisplayString | read-only | 'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed. |
| tempTable | 1.3.6.1.4.1.890.1.5.8.20.9.2 | not-accessible | ||
| tempEntry | 1.3.6.1.4.1.890.1.5.8.20.9.2.1 | not-accessible | An entry in tempTable. | |
| INT tempIndex | 1.3.6.1.4.1.890.1.5.8.20.9.2.1.1 | INTEGER | read-only | Index of temperature unit. 1:MAC, 2:CPU, 3:PHY |
| INT tempCurValue | 1.3.6.1.4.1.890.1.5.8.20.9.2.1.2 | INTEGER | read-only | The current temperature measured at this sensor. |
| INT tempMaxValue | 1.3.6.1.4.1.890.1.5.8.20.9.2.1.3 | INTEGER | read-only | The maximum temperature measured at this sensor. |
| INT tempMinValue | 1.3.6.1.4.1.890.1.5.8.20.9.2.1.4 | INTEGER | read-only | The minimum temperature measured at this sensor. |
| INT tempHighThresh | 1.3.6.1.4.1.890.1.5.8.20.9.2.1.5 | INTEGER | read-only | The upper temperature limit at this sensor. |
| STR tempDescr | 1.3.6.1.4.1.890.1.5.8.20.9.2.1.6 | DisplayString | read-only | 'Normal' indicates temperatures below the threshold and 'Error' for those above. |
| voltageTable | 1.3.6.1.4.1.890.1.5.8.20.9.3 | not-accessible | ||
| voltageEntry | 1.3.6.1.4.1.890.1.5.8.20.9.3.1 | not-accessible | An entry in voltageTable. | |
| INT voltageIndex | 1.3.6.1.4.1.890.1.5.8.20.9.3.1.1 | INTEGER | read-only | Index of voltage. |
| INT voltageCurValue | 1.3.6.1.4.1.890.1.5.8.20.9.3.1.2 | INTEGER | read-only | The current voltage reading. |
| INT voltageMaxValue | 1.3.6.1.4.1.890.1.5.8.20.9.3.1.3 | INTEGER | read-only | The maximum voltage measured at this point. |
| INT voltageMinValue | 1.3.6.1.4.1.890.1.5.8.20.9.3.1.4 | INTEGER | read-only | The minimum voltage measured at this point. |
| INT voltageNominalValue | 1.3.6.1.4.1.890.1.5.8.20.9.3.1.5 | INTEGER | read-only | The normal voltage at wchich the switch work. |
| INT voltageLowThresh | 1.3.6.1.4.1.890.1.5.8.20.9.3.1.6 | INTEGER | read-only | The minimum voltage at which the switch should work. |
| STR voltageDescr | 1.3.6.1.4.1.890.1.5.8.20.9.3.1.7 | DisplayString | read-only | 'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed. |
| snmpSetup | 1.3.6.1.4.1.890.1.5.8.20.10 | |||
| STR snmpGetCommunity | 1.3.6.1.4.1.890.1.5.8.20.10.1 | DisplayString | read-write | |
| STR snmpSetCommunity | 1.3.6.1.4.1.890.1.5.8.20.10.2 | DisplayString | read-write | |
| STR snmpTrapCommunity | 1.3.6.1.4.1.890.1.5.8.20.10.3 | DisplayString | read-write | |
| snmpTrapDestTable | 1.3.6.1.4.1.890.1.5.8.20.10.4 | not-accessible | ||
| snmpTrapDestEntry | 1.3.6.1.4.1.890.1.5.8.20.10.4.1 | not-accessible | An entry in snmpTrapDestTable. | |
| IP snmpTrapDestIP | 1.3.6.1.4.1.890.1.5.8.20.10.4.1.1 | IpAddress | not-accessible | IP address of trap destination. |
| ROW snmpTrapDestRowStatus | 1.3.6.1.4.1.890.1.5.8.20.10.4.1.2 | RowStatus | read-create | |
| dateTimeServerSetup | 1.3.6.1.4.1.890.1.5.8.20.11 | |||
| INT dateTimeServerType | 1.3.6.1.4.1.890.1.5.8.20.11.1 | INTEGER | read-write | The time service protocol. |
| IP dateTimeServerIP | 1.3.6.1.4.1.890.1.5.8.20.11.2 | IpAddress | read-write | IP address of time server. |
| INT dateTimeZone | 1.3.6.1.4.1.890.1.5.8.20.11.3 | INTEGER | read-write | The time difference between UTC. Ex: +01 |
| INT dateTimeNewDateYear | 1.3.6.1.4.1.890.1.5.8.20.11.4 | INTEGER | read-write | The new date in year. |
| INT dateTimeNewDateMonth | 1.3.6.1.4.1.890.1.5.8.20.11.5 | INTEGER | read-write | The new date in month. |
| INT dateTimeNewDateDay | 1.3.6.1.4.1.890.1.5.8.20.11.6 | INTEGER | read-write | The new date in day. |
| INT dateTimeNewTimeHour | 1.3.6.1.4.1.890.1.5.8.20.11.7 | INTEGER | read-write | The new time in hour. |
| INT dateTimeNewTimeMinute | 1.3.6.1.4.1.890.1.5.8.20.11.8 | INTEGER | read-write | The new time in minute. |
| INT dateTimeNewTimeSecond | 1.3.6.1.4.1.890.1.5.8.20.11.9 | INTEGER | read-write | The new time in second. |
| sysMgmt | 1.3.6.1.4.1.890.1.5.8.20.12 | |||
| INT sysMgmtConfigSave | 1.3.6.1.4.1.890.1.5.8.20.12.1 | INTEGER | read-write | If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config will be written to the booting one. |
| INT sysMgmtBootupConfig | 1.3.6.1.4.1.890.1.5.8.20.12.2 | INTEGER | read-write | The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can change the value of write index by CLI / MIB. |
| INT sysMgmtReboot | 1.3.6.1.4.1.890.1.5.8.20.12.3 | INTEGER | read-write | Reboot switch from SNMP. 1:Reboot, 0:Nothing |
| INT sysMgmtDefaultConfig | 1.3.6.1.4.1.890.1.5.8.20.12.4 | INTEGER | read-write | Erase running config and reset to default. |
| INT sysMgmtLastActionStatus | 1.3.6.1.4.1.890.1.5.8.20.12.5 | INTEGER | read-only | Display status of last mgmt action. |
| BIT sysMgmtSystemStatus | 1.3.6.1.4.1.890.1.5.8.20.12.6 | Bits | read-only | This variable indicates the status of the system. The sysMgmtAlarmStatus is a bit map represented a sum, therefore, it can represent multiple defects simultaneously. The sysNoDefect should be set if and only if no other flag is set. The various bit positions are: 0 sysAlarmDetected 1 sysTemperatureError 2 sysFanRPMError 3 sysVoltageRangeError |
| INT sysMgmtCPUUsage | 1.3.6.1.4.1.890.1.5.8.20.12.7 | INTEGER | read-only | Show device CPU load in %, it's the snapshot of CPU load when getting the values. |
| layer2Setup | 1.3.6.1.4.1.890.1.5.8.20.13 | |||
| INT vlanTypeSetup | 1.3.6.1.4.1.890.1.5.8.20.13.1 | INTEGER | read-write | |
| ENA igmpSnoopingStateSetup | 1.3.6.1.4.1.890.1.5.8.20.13.2 | EnabledStatus | read-write | |
| ENA tagVlanPortIsolationState | 1.3.6.1.4.1.890.1.5.8.20.13.3 | EnabledStatus | read-write | |
| ENA stpState | 1.3.6.1.4.1.890.1.5.8.20.13.4 | EnabledStatus | read-write | |
| ENA igmpFilteringStateSetup | 1.3.6.1.4.1.890.1.5.8.20.13.5 | EnabledStatus | read-write | |
| INT unknownMulticastFrameForwarding | 1.3.6.1.4.1.890.1.5.8.20.13.6 | INTEGER | read-write | |
| ipSetup | 1.3.6.1.4.1.890.1.5.8.20.14 | |||
| IP dnsIpAddress | 1.3.6.1.4.1.890.1.5.8.20.14.1 | IpAddress | read-write | |
| INT defaultMgmt | 1.3.6.1.4.1.890.1.5.8.20.14.2 | INTEGER | read-write | |
| IP defaultGateway | 1.3.6.1.4.1.890.1.5.8.20.14.3 | IpAddress | read-write | |
| outOfBandIpSetup | 1.3.6.1.4.1.890.1.5.8.20.14.4 | |||
| IP outOfBandIp | 1.3.6.1.4.1.890.1.5.8.20.14.4.1 | IpAddress | read-write | |
| IP outOfBandSubnetMask | 1.3.6.1.4.1.890.1.5.8.20.14.4.2 | IpAddress | read-write | |
| IP outOfBandGateway | 1.3.6.1.4.1.890.1.5.8.20.14.4.3 | IpAddress | read-write | |
| INT maxNumOfInbandIp | 1.3.6.1.4.1.890.1.5.8.20.14.5 | INTEGER | read-only | |
| inbandIpTable | 1.3.6.1.4.1.890.1.5.8.20.14.6 | not-accessible | ||
| inbandIpEntry | 1.3.6.1.4.1.890.1.5.8.20.14.6.1 | not-accessible | An entry in inbandIpTable. | |
| IP inbandEntryIp | 1.3.6.1.4.1.890.1.5.8.20.14.6.1.1 | IpAddress | read-write | |
| IP inbandEntrySubnetMask | 1.3.6.1.4.1.890.1.5.8.20.14.6.1.2 | IpAddress | read-write | |
| INT inbandEntryVid | 1.3.6.1.4.1.890.1.5.8.20.14.6.1.3 | INTEGER | read-write | |
| ROW inbandEntryRowStatus | 1.3.6.1.4.1.890.1.5.8.20.14.6.1.4 | RowStatus | read-create | |
| filterSetup | 1.3.6.1.4.1.890.1.5.8.20.15 | |||
| filterTable | 1.3.6.1.4.1.890.1.5.8.20.15.1 | not-accessible | ||
| filterEntry | 1.3.6.1.4.1.890.1.5.8.20.15.1.1 | not-accessible | An entry in filterTable. | |
| STR filterName | 1.3.6.1.4.1.890.1.5.8.20.15.1.1.1 | DisplayString | read-write | |
| INT filterActionState | 1.3.6.1.4.1.890.1.5.8.20.15.1.1.2 | INTEGER | read-write | |
| MAC filterMacAddr | 1.3.6.1.4.1.890.1.5.8.20.15.1.1.3 | MacAddress | read-only | |
| INT filterVid | 1.3.6.1.4.1.890.1.5.8.20.15.1.1.4 | INTEGER | read-only | |
| ROW filterRowStatus | 1.3.6.1.4.1.890.1.5.8.20.15.1.1.5 | RowStatus | read-create | |
| mirrorSetup | 1.3.6.1.4.1.890.1.5.8.20.16 | |||
| ENA mirrorState | 1.3.6.1.4.1.890.1.5.8.20.16.1 | EnabledStatus | read-write | |
| INT mirrorMonitorPort | 1.3.6.1.4.1.890.1.5.8.20.16.2 | INTEGER | read-write | |
| mirrorTable | 1.3.6.1.4.1.890.1.5.8.20.16.3 | not-accessible | ||
| mirrorEntry | 1.3.6.1.4.1.890.1.5.8.20.16.3.1 | not-accessible | An entry in mirrorTable. | |
| ENA mirrorMirroredState | 1.3.6.1.4.1.890.1.5.8.20.16.3.1.1 | EnabledStatus | read-write | |
| INT mirrorDirection | 1.3.6.1.4.1.890.1.5.8.20.16.3.1.2 | INTEGER | read-write | |
| aggrSetup | 1.3.6.1.4.1.890.1.5.8.20.17 | |||
| ENA aggrState | 1.3.6.1.4.1.890.1.5.8.20.17.1 | EnabledStatus | read-write | |
| INT aggrSystemPriority | 1.3.6.1.4.1.890.1.5.8.20.17.2 | INTEGER | read-write | |
| aggrGroupTable | 1.3.6.1.4.1.890.1.5.8.20.17.3 | not-accessible | ||
| aggrGroupEntry | 1.3.6.1.4.1.890.1.5.8.20.17.3.1 | not-accessible | An entry in aggrGroupTable. | |
| INT aggrGroupIndex | 1.3.6.1.4.1.890.1.5.8.20.17.3.1.1 | INTEGER | read-only | |
| ENA aggrGroupState | 1.3.6.1.4.1.890.1.5.8.20.17.3.1.2 | EnabledStatus | read-write | |
| ENA aggrGroupDynamicState | 1.3.6.1.4.1.890.1.5.8.20.17.3.1.3 | EnabledStatus | read-write | |
| aggrPortTable | 1.3.6.1.4.1.890.1.5.8.20.17.4 | not-accessible | ||
| aggrPortEntry | 1.3.6.1.4.1.890.1.5.8.20.17.4.1 | not-accessible | An entry in aggrPortTable. | |
| INT aggrPortGroup | 1.3.6.1.4.1.890.1.5.8.20.17.4.1.1 | INTEGER | read-write | |
| INT aggrPortDynamicStateTimeout | 1.3.6.1.4.1.890.1.5.8.20.17.4.1.2 | INTEGER | read-write | |
| accessCtlSetup | 1.3.6.1.4.1.890.1.5.8.20.18 | |||
| accessCtlTable | 1.3.6.1.4.1.890.1.5.8.20.18.1 | not-accessible | ||
| accessCtlEntry | 1.3.6.1.4.1.890.1.5.8.20.18.1.1 | not-accessible | An entry in accessCtlTable. | |
| INT accessCtlService | 1.3.6.1.4.1.890.1.5.8.20.18.1.1.1 | INTEGER | read-only | |
| ENA accessCtlEnable | 1.3.6.1.4.1.890.1.5.8.20.18.1.1.2 | EnabledStatus | read-write | |
| INT accessCtlServicePort | 1.3.6.1.4.1.890.1.5.8.20.18.1.1.3 | INTEGER | read-write | |
| INT accessCtlTimeout | 1.3.6.1.4.1.890.1.5.8.20.18.1.1.4 | INTEGER | read-write | |
| securedClientTable | 1.3.6.1.4.1.890.1.5.8.20.18.2 | not-accessible | ||
| securedClientEntry | 1.3.6.1.4.1.890.1.5.8.20.18.2.1 | not-accessible | An entry in securedClientTable. | |
| INT securedClientIndex | 1.3.6.1.4.1.890.1.5.8.20.18.2.1.1 | INTEGER | read-only | |
| ENA securedClientEnable | 1.3.6.1.4.1.890.1.5.8.20.18.2.1.2 | EnabledStatus | read-write | |
| IP securedClientStartIp | 1.3.6.1.4.1.890.1.5.8.20.18.2.1.3 | IpAddress | read-write | |
| IP securedClientEndIp | 1.3.6.1.4.1.890.1.5.8.20.18.2.1.4 | IpAddress | read-write | |
| BIT securedClientService | 1.3.6.1.4.1.890.1.5.8.20.18.2.1.5 | Bits | read-write | |
| queuingMethodSetup | 1.3.6.1.4.1.890.1.5.8.20.19 | |||
| portQueuingMethodTable | 1.3.6.1.4.1.890.1.5.8.20.19.1 | not-accessible | ||
| portQueuingMethodEntry | 1.3.6.1.4.1.890.1.5.8.20.19.1.1 | not-accessible | An entry in portQueuingMethodTable. | |
| INT portQueuingMethodQueue | 1.3.6.1.4.1.890.1.5.8.20.19.1.1.1 | INTEGER | read-only | 0...7 |
| INT portQueuingMethodWeight | 1.3.6.1.4.1.890.1.5.8.20.19.1.1.2 | INTEGER | read-write | 0...15 |
| INT portQueuingMethodMode | 1.3.6.1.4.1.890.1.5.8.20.19.1.1.3 | INTEGER | read-write | |
| dhcpSetup | 1.3.6.1.4.1.890.1.5.8.20.20 | |||
| dhcpRelay | 1.3.6.1.4.1.890.1.5.8.20.20.1 | |||
| ENA dhcpRelayEnable | 1.3.6.1.4.1.890.1.5.8.20.20.1.1 | EnabledStatus | read-write | |
| ENA dhcpRelayOption82Enable | 1.3.6.1.4.1.890.1.5.8.20.20.1.2 | EnabledStatus | read-write | |
| ENA dhcpRelayInfoEnable | 1.3.6.1.4.1.890.1.5.8.20.20.1.3 | EnabledStatus | read-write | |
| STR dhcpRelayInfoData | 1.3.6.1.4.1.890.1.5.8.20.20.1.4 | DisplayString | read-only | |
| INT maxNumberOfDhcpRemoteServer | 1.3.6.1.4.1.890.1.5.8.20.20.1.5 | INTEGER | read-only | |
| dhcpRemoteServerTable | 1.3.6.1.4.1.890.1.5.8.20.20.1.6 | not-accessible | ||
| dhcpRemoteServerEntry | 1.3.6.1.4.1.890.1.5.8.20.20.1.6.1 | not-accessible | An entry in dhcpRemoteServerTable. | |
| IP dhcpRemoteServerIp | 1.3.6.1.4.1.890.1.5.8.20.20.1.6.1.1 | IpAddress | read-only | |
| ROW dhcpRemoteServerRowStatus | 1.3.6.1.4.1.890.1.5.8.20.20.1.6.1.2 | RowStatus | read-create | |
| dhcpServer | 1.3.6.1.4.1.890.1.5.8.20.20.2 | |||
| INT maxNumberOfDhcpServers | 1.3.6.1.4.1.890.1.5.8.20.20.2.1 | INTEGER | read-only | |
| dhcpServerTable | 1.3.6.1.4.1.890.1.5.8.20.20.2.2 | not-accessible | ||
| dhcpServerEntry | 1.3.6.1.4.1.890.1.5.8.20.20.2.2.1 | not-accessible | An entry in dhcpServerTable. | |
| INT dhcpServerVid | 1.3.6.1.4.1.890.1.5.8.20.20.2.2.1.1 | INTEGER | read-only | |
| IP dhcpServerStartAddr | 1.3.6.1.4.1.890.1.5.8.20.20.2.2.1.2 | IpAddress | read-create | |
| INT dhcpServerPoolSize | 1.3.6.1.4.1.890.1.5.8.20.20.2.2.1.3 | INTEGER | read-create | |
| IP dhcpServerMask | 1.3.6.1.4.1.890.1.5.8.20.20.2.2.1.4 | IpAddress | read-create | |
| IP dhcpServerGateway | 1.3.6.1.4.1.890.1.5.8.20.20.2.2.1.5 | IpAddress | read-create | |
| IP dhcpServerPrimaryDNS | 1.3.6.1.4.1.890.1.5.8.20.20.2.2.1.6 | IpAddress | read-create | |
| IP dhcpServerSecondaryDNS | 1.3.6.1.4.1.890.1.5.8.20.20.2.2.1.7 | IpAddress | read-create | |
| ROW dhcpServerRowStatus | 1.3.6.1.4.1.890.1.5.8.20.20.2.2.1.8 | RowStatus | read-create | |
| staticRouteSetup | 1.3.6.1.4.1.890.1.5.8.20.21 | |||
| INT maxNumberOfStaticRoutes | 1.3.6.1.4.1.890.1.5.8.20.21.1 | INTEGER | read-only | |
| staticRouteTable | 1.3.6.1.4.1.890.1.5.8.20.21.2 | not-accessible | ||
| staticRouteEntry | 1.3.6.1.4.1.890.1.5.8.20.21.2.1 | not-accessible | An entry in staticRouteTable. | |
| STR staticRouteName | 1.3.6.1.4.1.890.1.5.8.20.21.2.1.1 | DisplayString | read-write | |
| IP staticRouteIp | 1.3.6.1.4.1.890.1.5.8.20.21.2.1.2 | IpAddress | read-only | |
| IP staticRouteMask | 1.3.6.1.4.1.890.1.5.8.20.21.2.1.3 | IpAddress | read-only | |
| IP staticRouteGateway | 1.3.6.1.4.1.890.1.5.8.20.21.2.1.4 | IpAddress | read-write | |
| INT staticRouteMetric | 1.3.6.1.4.1.890.1.5.8.20.21.2.1.5 | INTEGER | read-write | |
| ROW staticRouteRowStatus | 1.3.6.1.4.1.890.1.5.8.20.21.2.1.6 | RowStatus | read-create | |
| arpInfo | 1.3.6.1.4.1.890.1.5.8.20.22 | |||
| arpTable | 1.3.6.1.4.1.890.1.5.8.20.22.1 | not-accessible | ||
| arpEntry | 1.3.6.1.4.1.890.1.5.8.20.22.1.1 | not-accessible | An entry in arpTable. | |
| INT arpIndex | 1.3.6.1.4.1.890.1.5.8.20.22.1.1.1 | INTEGER | read-only | |
| IP arpIpAddr | 1.3.6.1.4.1.890.1.5.8.20.22.1.1.2 | IpAddress | read-only | |
| MAC arpMacAddr | 1.3.6.1.4.1.890.1.5.8.20.22.1.1.3 | MacAddress | read-only | |
| INT arpMacVid | 1.3.6.1.4.1.890.1.5.8.20.22.1.1.4 | INTEGER | read-only | |
| INT arpType | 1.3.6.1.4.1.890.1.5.8.20.22.1.1.5 | INTEGER | read-only | 1-static, 2-dynamic |
| portOpModeSetup | 1.3.6.1.4.1.890.1.5.8.20.23 | |||
| portOpModePortTable | 1.3.6.1.4.1.890.1.5.8.20.23.1 | not-accessible | ||
| portOpModePortEntry | 1.3.6.1.4.1.890.1.5.8.20.23.1.1 | not-accessible | An entry in portOpModePortTable. | |
| INT portOpModePortSpeedDuplex | 1.3.6.1.4.1.890.1.5.8.20.23.1.1.1 | INTEGER | read-write | |
| INT portOpModePortFlowCntl | 1.3.6.1.4.1.890.1.5.8.20.23.1.1.2 | INTEGER | read-write | |
| OCT portOpModePortName | 1.3.6.1.4.1.890.1.5.8.20.23.1.1.3 | OCTET STRING | read-write | |
| INT portOpModePortModuleType | 1.3.6.1.4.1.890.1.5.8.20.23.1.1.4 | INTEGER | read-only | |
| INT portOpModePortLinkUpType | 1.3.6.1.4.1.890.1.5.8.20.23.1.1.5 | INTEGER | read-only | |
| ENA portOpModePortIntrusionLock | 1.3.6.1.4.1.890.1.5.8.20.23.1.1.6 | EnabledStatus | read-write | |
| INT portOpModePortLBTestStatus | 1.3.6.1.4.1.890.1.5.8.20.23.1.1.7 | INTEGER | read-only | This entry display latest loopback test status of port while performing loopback test. |
| portBasedVlanSetup | 1.3.6.1.4.1.890.1.5.8.20.24 | |||
| portBasedVlanPortListTable | 1.3.6.1.4.1.890.1.5.8.20.24.1 | not-accessible | ||
| portBasedVlanPortListEntry | 1.3.6.1.4.1.890.1.5.8.20.24.1.1 | not-accessible | An entry in portBasedVlanPortListTable. | |
| POR portBasedVlanPortListMembers | 1.3.6.1.4.1.890.1.5.8.20.24.1.1.1 | PortList | read-write | |
| multicastPortSetup | 1.3.6.1.4.1.890.1.5.8.20.25 | |||
| multicastPortTable | 1.3.6.1.4.1.890.1.5.8.20.25.1 | not-accessible | ||
| multicastPortEntry | 1.3.6.1.4.1.890.1.5.8.20.25.1.1 | not-accessible | An entry in multicastPortTable. | |
| ENA multicastPortImmediateLeave | 1.3.6.1.4.1.890.1.5.8.20.25.1.1.1 | EnabledStatus | read-write | |
| ENA multicastPortMaxGroupLimited | 1.3.6.1.4.1.890.1.5.8.20.25.1.1.2 | EnabledStatus | read-write | |
| INT multicastPortMaxOfGroup | 1.3.6.1.4.1.890.1.5.8.20.25.1.1.3 | INTEGER | read-write | 0..255 |
| STR multicastPortIgmpFilteringProfile | 1.3.6.1.4.1.890.1.5.8.20.25.1.1.4 | DisplayString | read-write | |
| multicastStatus | 1.3.6.1.4.1.890.1.5.8.20.26 | |||
| multicastStatusTable | 1.3.6.1.4.1.890.1.5.8.20.26.1 | not-accessible | ||
| multicastStatusEntry | 1.3.6.1.4.1.890.1.5.8.20.26.1.1 | not-accessible | An entry in multicastStatusTable. | |
| INT multicastStatusIndex | 1.3.6.1.4.1.890.1.5.8.20.26.1.1.1 | INTEGER | read-only | |
| INT multicastStatusVlanID | 1.3.6.1.4.1.890.1.5.8.20.26.1.1.2 | INTEGER | read-only | |
| INT multicastStatusPort | 1.3.6.1.4.1.890.1.5.8.20.26.1.1.3 | INTEGER | read-only | |
| IP multicastStatusGroup | 1.3.6.1.4.1.890.1.5.8.20.26.1.1.4 | IpAddress | read-only | |
| igmpFilteringProfileSetup | 1.3.6.1.4.1.890.1.5.8.20.27 | |||
| INT igmpFilteringMaxNumberOfProfile | 1.3.6.1.4.1.890.1.5.8.20.27.1 | INTEGER | read-only | |
| igmpFilteringProfileTable | 1.3.6.1.4.1.890.1.5.8.20.27.2 | not-accessible | ||
| igmpFilteringProfileEntry | 1.3.6.1.4.1.890.1.5.8.20.27.2.1 | not-accessible | An entry in igmpFilteringProfileTable. | |
| STR igmpFilteringProfileName | 1.3.6.1.4.1.890.1.5.8.20.27.2.1.1 | DisplayString | read-only | |
| IP igmpFilteringProfileStartAddress | 1.3.6.1.4.1.890.1.5.8.20.27.2.1.2 | IpAddress | read-only | |
| IP igmpFilteringProfileEndAddress | 1.3.6.1.4.1.890.1.5.8.20.27.2.1.3 | IpAddress | read-only | |
| ROW igmpFilteringProfileRowStatus | 1.3.6.1.4.1.890.1.5.8.20.27.2.1.4 | RowStatus | read-create | |
| mvrSetup | 1.3.6.1.4.1.890.1.5.8.20.28 | |||
| INT maxNumberOfMVR | 1.3.6.1.4.1.890.1.5.8.20.28.1 | INTEGER | read-only | |
| mvrTable | 1.3.6.1.4.1.890.1.5.8.20.28.2 | not-accessible | ||
| mvrEntry | 1.3.6.1.4.1.890.1.5.8.20.28.2.1 | not-accessible | An entry in mvrTable. | |
| INT mvrVlanID | 1.3.6.1.4.1.890.1.5.8.20.28.2.1.1 | INTEGER | read-only | 1..4094 |
| STR mvrName | 1.3.6.1.4.1.890.1.5.8.20.28.2.1.2 | DisplayString | read-write | |
| INT mvrMode | 1.3.6.1.4.1.890.1.5.8.20.28.2.1.3 | INTEGER | read-write | |
| ROW mvrRowStatus | 1.3.6.1.4.1.890.1.5.8.20.28.2.1.4 | RowStatus | read-create | |
| mvrPortTable | 1.3.6.1.4.1.890.1.5.8.20.28.3 | not-accessible | ||
| mvrPortEntry | 1.3.6.1.4.1.890.1.5.8.20.28.3.1 | not-accessible | An entry in mvrPortTable. | |
| INT mvrPortRole | 1.3.6.1.4.1.890.1.5.8.20.28.3.1.1 | INTEGER | read-write | |
| ENA mvrPortTagging | 1.3.6.1.4.1.890.1.5.8.20.28.3.1.2 | EnabledStatus | read-write | |
| INT maxNumberOfMvrGroup | 1.3.6.1.4.1.890.1.5.8.20.28.4 | INTEGER | read-only | |
| mvrGroupTable | 1.3.6.1.4.1.890.1.5.8.20.28.5 | not-accessible | ||
| mvrGroupEntry | 1.3.6.1.4.1.890.1.5.8.20.28.5.1 | not-accessible | An entry in mvrGroupTable. | |
| STR mvrGroupName | 1.3.6.1.4.1.890.1.5.8.20.28.5.1.1 | DisplayString | read-only | |
| IP mvrGroupStartAddress | 1.3.6.1.4.1.890.1.5.8.20.28.5.1.2 | IpAddress | read-write | |
| IP mvrGroupEndAddress | 1.3.6.1.4.1.890.1.5.8.20.28.5.1.3 | IpAddress | read-write | |
| ROW mvrGroupRowStatus | 1.3.6.1.4.1.890.1.5.8.20.28.5.1.4 | RowStatus | read-create | |
| layer3Setup | 1.3.6.1.4.1.890.1.5.8.20.29 | |||
| ENA routerRipState | 1.3.6.1.4.1.890.1.5.8.20.29.1 | EnabledStatus | read-write | |
| ENA routerIgmpState | 1.3.6.1.4.1.890.1.5.8.20.29.2 | EnabledStatus | read-write | |
| ENA routerDvmrpState | 1.3.6.1.4.1.890.1.5.8.20.29.3 | EnabledStatus | read-write | |
| INT routerDvmrpThreshold | 1.3.6.1.4.1.890.1.5.8.20.29.4 | INTEGER | read-write | |
| routerIpmcPortSetup | 1.3.6.1.4.1.890.1.5.8.20.30 | |||
| routerIpmcPortTable | 1.3.6.1.4.1.890.1.5.8.20.30.1 | not-accessible | ||
| routerIpmcPortEntry | 1.3.6.1.4.1.890.1.5.8.20.30.1.1 | not-accessible | An entry in routerIpmcPortTable. | |
| INT routerIpmcPortEgressUntagVlan | 1.3.6.1.4.1.890.1.5.8.20.30.1.1.1 | INTEGER | read-write | |
| routerVrrpSetup | 1.3.6.1.4.1.890.1.5.8.20.31 | |||
| INT routerVrrpMaxNumber | 1.3.6.1.4.1.890.1.5.8.20.31.1 | INTEGER | read-only | Always set it as 14. |
| routerVrrpTable | 1.3.6.1.4.1.890.1.5.8.20.31.2 | not-accessible | ||
| routerVrrpEntry | 1.3.6.1.4.1.890.1.5.8.20.31.2.1 | not-accessible | An entry in routerVrrpTable. | |
| INT routerVrrpVirtualID | 1.3.6.1.4.1.890.1.5.8.20.31.2.1.1 | INTEGER | read-only | |
| IP routerVrrpUplinkGateway | 1.3.6.1.4.1.890.1.5.8.20.31.2.1.2 | IpAddress | read-only | |
| ENA routerVrrpPreempt | 1.3.6.1.4.1.890.1.5.8.20.31.2.1.3 | EnabledStatus | read-write | |
| INT routerVrrpInterval | 1.3.6.1.4.1.890.1.5.8.20.31.2.1.4 | INTEGER | read-write | 1-255 |
| INT routerVrrpPriority | 1.3.6.1.4.1.890.1.5.8.20.31.2.1.5 | INTEGER | read-write | 1-254 |
| IP routerVrrpPrimaryVirtualIP | 1.3.6.1.4.1.890.1.5.8.20.31.2.1.6 | IpAddress | read-write | |
| STR routerVrrpName | 1.3.6.1.4.1.890.1.5.8.20.31.2.1.7 | DisplayString | read-write | |
| IP routerVrrpSecondaryVirtualIP | 1.3.6.1.4.1.890.1.5.8.20.31.2.1.8 | IpAddress | read-write | |
| ROW rpVrrpRowStatus | 1.3.6.1.4.1.890.1.5.8.20.31.2.1.9 | RowStatus | read-create | |
| routerVrrpDomainTable | 1.3.6.1.4.1.890.1.5.8.20.31.3 | not-accessible | ||
| routerVrrpDomainEntry | 1.3.6.1.4.1.890.1.5.8.20.31.3.1 | not-accessible | An entry in routerVrrpTable. | |
| INT routerVrrpAuthType | 1.3.6.1.4.1.890.1.5.8.20.31.3.1.1 | INTEGER | read-write | |
| STR routerVrrpAuthKey | 1.3.6.1.4.1.890.1.5.8.20.31.3.1.2 | DisplayString | read-write | |
| routerVrrpStatus | 1.3.6.1.4.1.890.1.5.8.20.32 | |||
| routerVrrpStatusTable | 1.3.6.1.4.1.890.1.5.8.20.32.1 | not-accessible | ||
| routerVrrpStatusEntry | 1.3.6.1.4.1.890.1.5.8.20.32.1.1 | not-accessible | ||
| IP routerVrrpStatusIpAddress | 1.3.6.1.4.1.890.1.5.8.20.32.1.1.1 | IpAddress | read-only | |
| INT routerVrrpStatusIpMaskBits | 1.3.6.1.4.1.890.1.5.8.20.32.1.1.2 | INTEGER | read-only | |
| INT routerVrrpStatusVirtualID | 1.3.6.1.4.1.890.1.5.8.20.32.1.1.3 | INTEGER | read-only | |
| STR routerVrrpStatusVRStatus | 1.3.6.1.4.1.890.1.5.8.20.32.1.1.4 | DisplayString | read-only | |
| STR routerVrrpStatusUpLinkStatus | 1.3.6.1.4.1.890.1.5.8.20.32.1.1.5 | DisplayString | read-only | |
| routerDomainSetup | 1.3.6.1.4.1.890.1.5.8.20.33 | |||
| routerDomainTable | 1.3.6.1.4.1.890.1.5.8.20.33.1 | not-accessible | ||
| routerDomainEntry | 1.3.6.1.4.1.890.1.5.8.20.33.1.1 | not-accessible | An entry in routerDomainTable. | |
| IP routerDomainIpAddress | 1.3.6.1.4.1.890.1.5.8.20.33.1.1.1 | IpAddress | read-only | |
| INT routerDomainIpMaskBits | 1.3.6.1.4.1.890.1.5.8.20.33.1.1.2 | INTEGER | read-only | |
| INT routerDomainVid | 1.3.6.1.4.1.890.1.5.8.20.33.1.1.3 | INTEGER | read-only | |
| routerDomainIpTable | 1.3.6.1.4.1.890.1.5.8.20.33.2 | not-accessible | ||
| routerDomainIpEntry | 1.3.6.1.4.1.890.1.5.8.20.33.2.1 | not-accessible | An entry in routerDomainIpTable. | |
| INT routerDomainIpRipDirection | 1.3.6.1.4.1.890.1.5.8.20.33.2.1.1 | INTEGER | read-write | |
| INT routerDomainIpRipVersion | 1.3.6.1.4.1.890.1.5.8.20.33.2.1.2 | INTEGER | read-write | |
| INT routerDomainIpIgmpVersion | 1.3.6.1.4.1.890.1.5.8.20.33.2.1.3 | INTEGER | read-write | |
| ENA routerDomainIpDvmrp | 1.3.6.1.4.1.890.1.5.8.20.33.2.1.4 | EnabledStatus | read-write | |
| diffservSetup | 1.3.6.1.4.1.890.1.5.8.20.34 | |||
| ENA diffservState | 1.3.6.1.4.1.890.1.5.8.20.34.1 | EnabledStatus | read-write | |
| diffservMapTable | 1.3.6.1.4.1.890.1.5.8.20.34.2 | not-accessible | ||
| diffservMapEntry | 1.3.6.1.4.1.890.1.5.8.20.34.2.1 | not-accessible | An entry in diffservMapTable. | |
| INT diffservMapDscp | 1.3.6.1.4.1.890.1.5.8.20.34.2.1.1 | INTEGER | read-only | 0-63 |
| INT diffservMapPriority | 1.3.6.1.4.1.890.1.5.8.20.34.2.1.2 | INTEGER | read-write | 0-7 |
| diffservPortTable | 1.3.6.1.4.1.890.1.5.8.20.34.3 | not-accessible | ||
| diffservPortEntry | 1.3.6.1.4.1.890.1.5.8.20.34.3.1 | not-accessible | An entry in diffservPortTable. | |
| ENA diffservPortState | 1.3.6.1.4.1.890.1.5.8.20.34.3.1.1 | EnabledStatus | read-write | |
| clusterSetup | 1.3.6.1.4.1.890.1.5.8.20.35 | |||
| clusterManager | 1.3.6.1.4.1.890.1.5.8.20.35.1 | |||
| INT clusterMaxNumOfManager | 1.3.6.1.4.1.890.1.5.8.20.35.1.1 | INTEGER | read-only | |
| clusterManagerTable | 1.3.6.1.4.1.890.1.5.8.20.35.1.2 | not-accessible | ||
| clusterManagerEntry | 1.3.6.1.4.1.890.1.5.8.20.35.1.2.1 | not-accessible | An entry in clusterManagerTable. | |
| INT clusterManagerVid | 1.3.6.1.4.1.890.1.5.8.20.35.1.2.1.1 | INTEGER | read-only | |
| STR clusterManagerName | 1.3.6.1.4.1.890.1.5.8.20.35.1.2.1.2 | DisplayString | read-write | |
| ROW clusterManagerRowStatus | 1.3.6.1.4.1.890.1.5.8.20.35.1.2.1.3 | RowStatus | read-create | |
| clusterMembers | 1.3.6.1.4.1.890.1.5.8.20.35.2 | |||
| INT clusterMaxNumOfMember | 1.3.6.1.4.1.890.1.5.8.20.35.2.1 | INTEGER | read-only | |
| clusterMemberTable | 1.3.6.1.4.1.890.1.5.8.20.35.2.2 | not-accessible | ||
| clusterMemberEntry | 1.3.6.1.4.1.890.1.5.8.20.35.2.2.1 | not-accessible | An entry in clusterMemberTable. | |
| STR clusterMemberMac | 1.3.6.1.4.1.890.1.5.8.20.35.2.2.1.1 | DisplayString | read-only | |
| STR clusterMemberName | 1.3.6.1.4.1.890.1.5.8.20.35.2.2.1.2 | DisplayString | read-only | |
| STR clusterMemberModel | 1.3.6.1.4.1.890.1.5.8.20.35.2.2.1.3 | DisplayString | read-only | |
| STR clusterMemberPassword | 1.3.6.1.4.1.890.1.5.8.20.35.2.2.1.4 | DisplayString | not-accessible | |
| ROW clusterMemberRowStatus | 1.3.6.1.4.1.890.1.5.8.20.35.2.2.1.5 | RowStatus | read-create | |
| clusterCandidates | 1.3.6.1.4.1.890.1.5.8.20.35.3 | |||
| clusterCandidateTable | 1.3.6.1.4.1.890.1.5.8.20.35.3.1 | not-accessible | ||
| clusterCandidateEntry | 1.3.6.1.4.1.890.1.5.8.20.35.3.1.1 | not-accessible | An entry in clusterCandidateTable. | |
| STR clusterCandidateMac | 1.3.6.1.4.1.890.1.5.8.20.35.3.1.1.1 | DisplayString | read-only | |
| STR clusterCandidateName | 1.3.6.1.4.1.890.1.5.8.20.35.3.1.1.2 | DisplayString | read-only | |
| STR clusterCandidateModel | 1.3.6.1.4.1.890.1.5.8.20.35.3.1.1.3 | DisplayString | read-only | |
| clusterStatus | 1.3.6.1.4.1.890.1.5.8.20.35.4 | |||
| INT clusterStatusRole | 1.3.6.1.4.1.890.1.5.8.20.35.4.1 | INTEGER | read-only | |
| STR clusterStatusManager | 1.3.6.1.4.1.890.1.5.8.20.35.4.2 | DisplayString | read-only | |
| INT clsuterStatusMaxNumOfMember | 1.3.6.1.4.1.890.1.5.8.20.35.4.3 | INTEGER | read-only | |
| clusterStatusMemberTable | 1.3.6.1.4.1.890.1.5.8.20.35.4.4 | not-accessible | ||
| clusterStatusMemberEntry | 1.3.6.1.4.1.890.1.5.8.20.35.4.4.1 | not-accessible | An entry in clusterStatusMemberTable. | |
| STR clusterStatusMemberMac | 1.3.6.1.4.1.890.1.5.8.20.35.4.4.1.1 | DisplayString | read-only | |
| STR clusterStatusMemberName | 1.3.6.1.4.1.890.1.5.8.20.35.4.4.1.2 | DisplayString | read-only | |
| STR clusterStatusMemberModel | 1.3.6.1.4.1.890.1.5.8.20.35.4.4.1.3 | DisplayString | read-only | |
| INT clusterStatusMemberStatus | 1.3.6.1.4.1.890.1.5.8.20.35.4.4.1.4 | INTEGER | read-only | |
| faultMIB | 1.3.6.1.4.1.890.1.5.8.20.36 | Fault event table definitions | ||
| eventObjects | 1.3.6.1.4.1.890.1.5.8.20.36.1 | |||
| eventTable | 1.3.6.1.4.1.890.1.5.8.20.36.1.1 | not-accessible | A list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault is cleared it is deleted from the event table. | |
| eventEntry | 1.3.6.1.4.1.890.1.5.8.20.36.1.1.1 | not-accessible | An entry containing information about an event in the event table. | |
| I32 eventSeqNum | 1.3.6.1.4.1.890.1.5.8.20.36.1.1.1.1 | Integer32 | read-only | This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is incremented when - the state of a normal type fault is set on (the same sequence number is present in the events table as well as in the trap that is sent to notify about the fault on event) - delta event occurs (sequence number present in trap message) - the state of a normal type fault is set off (sequence number present in trap that is sent to notify for clearing). |
| EVE eventEventId | 1.3.6.1.4.1.890.1.5.8.20.36.1.1.1.2 | EventIdNumber | read-only | This variable represents the event ID which uniquely identifies the event in the entire system. |
| STR eventName | 1.3.6.1.4.1.890.1.5.8.20.36.1.1.1.3 | DisplayString | read-only | This variable represents the name of the event, for example 'Ethernet Link Down' |
| INS eventInstanceType | 1.3.6.1.4.1.890.1.5.8.20.36.1.1.1.4 | InstanceType | read-only | This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For more details see the textual conventions section. AFFECTS: eventInstanceId, eventInstanceName |
| STR eventInstanceId | 1.3.6.1.4.1.890.1.5.8.20.36.1.1.1.5 | DisplayString | read-only | This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceType |
| STR eventInstanceName | 1.3.6.1.4.1.890.1.5.8.20.36.1.1.1.6 | DisplayString | read-only | This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstanceType |
| EVE eventSeverity | 1.3.6.1.4.1.890.1.5.8.20.36.1.1.1.7 | EventSeverity | read-only | This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention to prevent/reduce system down time. Major events require quick attention and Minor events possibly require some attention. Informational events indicate the occurrence of events that may need to be investigated. |
| UTC eventSetTime | 1.3.6.1.4.1.890.1.5.8.20.36.1.1.1.8 | UtcTimeStamp | read-only | This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM. |
| STR eventDescription | 1.3.6.1.4.1.890.1.5.8.20.36.1.1.1.9 | DisplayString | read-only | This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no usefull information to report. The maximum length of this string is 255 characters. |
| EVE eventServAffective | 1.3.6.1.4.1.890.1.5.8.20.36.1.1.1.10 | EventServiceAffective | read-only | This variable indicates whether the event is service affective or not |
| faultTrapsMIB | 1.3.6.1.4.1.890.1.5.8.20.37 | Fault event trap definitions | ||
| trapInfoObjects | 1.3.6.1.4.1.890.1.5.8.20.37.1 | |||
| I32 trapRefSeqNum | 1.3.6.1.4.1.890.1.5.8.20.37.1.1 | Integer32 | read-only | Indicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications. |
| EVE trapPersistence | 1.3.6.1.4.1.890.1.5.8.20.37.1.2 | EventPersistence | read-only | Indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap notifications. |
| I32 trapSenderNodeId | 1.3.6.1.4.1.890.1.5.8.20.37.1.3 | Integer32 | read-only | Represents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications. |
| trapNotifications | 1.3.6.1.4.1.890.1.5.8.20.37.2 | |||
| NTF eventOnTrap | 1.3.6.1.4.1.890.1.5.8.20.37.2.1 | This trap is used to inform network management system that a delta fault event (events that are automatically cleared) has occured or a normal fault event (not automatically cleared) state has been set on. Objects are used as follows: - eventSeqNum is the sequence number of the event. For normal type of events must equal to the sequence number of the event in the events table. - eventEventId specifies what fault event has occured. - eventName specifies the name of the fault event. - eventSetTime indicates when fault event has occured (delta events) or when fault has been set on (normal events). - eventSeverity reports the severity level of the event. - eventInstanceType indicates what kind of object is faulty. - eventInstanceId specifies what instance is faulty. - eventInstanceName may contain textual description for the faulty object. - eventServAffective specifies whether the event is immediately service affcetive. - eventDescription reports possible additional information about the event. - trapPersistence tells whether this event is a delta or normal event. - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the fault event. For more information see the eventTable specification | ||
| NTF eventClearedTrap | 1.3.6.1.4.1.890.1.5.8.20.37.2.2 | This trap is used to inform network management system that a normal type fault event has been cleared (state set off). Objects are used as follows: - eventSeqNum is the sequence number of the this clearing event. Note that the sequence number of the cleared event is reported in the trapRefSeqNum object. - eventEventId specifies what event has been cleared. - eventSetTime indicates when fault event has been cleared. - eventInstanceType indicates what kind of object has been faulty. - eventInstanceId specifies what instance has been faulty. - trapRefSeqNum specifies the sequence number of the cleared event (i.e. the sequence number was assigned for the event in the events table). - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the clearing event. For more information see the eventTable specification | ||
| ipStatus | 1.3.6.1.4.1.890.1.5.8.20.38 | |||
| ipStatusTable | 1.3.6.1.4.1.890.1.5.8.20.38.1 | not-accessible | ||
| ipStatusEntry | 1.3.6.1.4.1.890.1.5.8.20.38.1.1 | not-accessible | ||
| IP ipStatusIPAddress | 1.3.6.1.4.1.890.1.5.8.20.38.1.1.1 | IpAddress | read-only | |
| INT ipStatusVid | 1.3.6.1.4.1.890.1.5.8.20.38.1.1.2 | INTEGER | read-only | |
| STR ipStatusPort | 1.3.6.1.4.1.890.1.5.8.20.38.1.1.3 | DisplayString | read-only | |
| INT ipStatusType | 1.3.6.1.4.1.890.1.5.8.20.38.1.1.4 | INTEGER | read-only | |
| routingStatus | 1.3.6.1.4.1.890.1.5.8.20.39 | |||
| routingStatusTable | 1.3.6.1.4.1.890.1.5.8.20.39.1 | not-accessible | ||
| routingStatusEntry | 1.3.6.1.4.1.890.1.5.8.20.39.1.1 | not-accessible | ||
| IP routingStatusDestAddress | 1.3.6.1.4.1.890.1.5.8.20.39.1.1.1 | IpAddress | read-only | |
| INT routingStatusDestMaskbits | 1.3.6.1.4.1.890.1.5.8.20.39.1.1.2 | INTEGER | read-only | |
| IP routingStatusGateway | 1.3.6.1.4.1.890.1.5.8.20.39.1.1.3 | IpAddress | read-only | |
| IP routingStatusInterface | 1.3.6.1.4.1.890.1.5.8.20.39.1.1.4 | IpAddress | read-only | |
| INT routingStatusMetric | 1.3.6.1.4.1.890.1.5.8.20.39.1.1.5 | INTEGER | read-only | |
| INT routingStatusType | 1.3.6.1.4.1.890.1.5.8.20.39.1.1.6 | INTEGER | read-only | |
| ospfExt | 1.3.6.1.4.1.890.1.5.8.20.40 | |||
| ospfInterfaceTable | 1.3.6.1.4.1.890.1.5.8.20.40.1 | not-accessible | ||
| ospfInterfaceEntry | 1.3.6.1.4.1.890.1.5.8.20.40.1.1 | not-accessible | ||
| INT ospfIfKeyId | 1.3.6.1.4.1.890.1.5.8.20.40.1.1.1 | INTEGER | read-write | |
| INT ospfIfMaskbits | 1.3.6.1.4.1.890.1.5.8.20.40.1.1.2 | INTEGER | read-only | |
| IP ospfIfDesignatedRouterID | 1.3.6.1.4.1.890.1.5.8.20.40.1.1.3 | IpAddress | read-only | |
| IP ospfIfBackupDesignatedRouterID | 1.3.6.1.4.1.890.1.5.8.20.40.1.1.4 | IpAddress | read-only | |
| INT ospfIfNbrCount | 1.3.6.1.4.1.890.1.5.8.20.40.1.1.5 | INTEGER | read-only | |
| INT ospfIfAdjacentNbrCount | 1.3.6.1.4.1.890.1.5.8.20.40.1.1.6 | INTEGER | read-only | |
| STR ospfIfHelloDueTime | 1.3.6.1.4.1.890.1.5.8.20.40.1.1.7 | DisplayString | read-only | |
| ospfAreaExtTable | 1.3.6.1.4.1.890.1.5.8.20.40.2 | not-accessible | ||
| ospfAreaExtEntry | 1.3.6.1.4.1.890.1.5.8.20.40.2.1 | not-accessible | ||
| STR ospfAreaExtName | 1.3.6.1.4.1.890.1.5.8.20.40.2.1.1 | DisplayString | read-write | |
| ospfRedistributeRouteTable | 1.3.6.1.4.1.890.1.5.8.20.40.3 | not-accessible | ||
| ospfRedistributeRouteEntry | 1.3.6.1.4.1.890.1.5.8.20.40.3.1 | not-accessible | ||
| INT ospfRedistributeRouteProtocol | 1.3.6.1.4.1.890.1.5.8.20.40.3.1.1 | INTEGER | read-only | |
| ENA ospfRedistributeRouteState | 1.3.6.1.4.1.890.1.5.8.20.40.3.1.2 | EnabledStatus | read-write | |
| INT ospfRedistributeRouteType | 1.3.6.1.4.1.890.1.5.8.20.40.3.1.3 | INTEGER | read-write | |
| INT ospfRedistributeRouteMetric | 1.3.6.1.4.1.890.1.5.8.20.40.3.1.4 | INTEGER | read-write | |
| ospfNbrExtTable | 1.3.6.1.4.1.890.1.5.8.20.40.4 | not-accessible | ||
| ospfNbrExtEntry | 1.3.6.1.4.1.890.1.5.8.20.40.4.1 | not-accessible | ||
| INT ospfNbrExtRole | 1.3.6.1.4.1.890.1.5.8.20.40.4.1.1 | INTEGER | read-only | |
| STR ospfNbrExtDeadtime | 1.3.6.1.4.1.890.1.5.8.20.40.4.1.2 | DisplayString | read-only | |
| IP ospfNbrExtInterface | 1.3.6.1.4.1.890.1.5.8.20.40.4.1.3 | IpAddress | read-only | |
| INT ospfNbrExtRXmtL | 1.3.6.1.4.1.890.1.5.8.20.40.4.1.4 | INTEGER | read-only | |
| INT ospfNbrExtRqstL | 1.3.6.1.4.1.890.1.5.8.20.40.4.1.5 | INTEGER | read-only | |
| INT ospfNbrExtDBsmL | 1.3.6.1.4.1.890.1.5.8.20.40.4.1.6 | INTEGER | read-only | |
| ospfLsdbExtTable | 1.3.6.1.4.1.890.1.5.8.20.40.5 | not-accessible | ||
| ospfLsdbExtEntry | 1.3.6.1.4.1.890.1.5.8.20.40.5.1 | not-accessible | ||
| INT ospfLsdbExtLinkCount | 1.3.6.1.4.1.890.1.5.8.20.40.5.1.1 | INTEGER | read-only | |
| IP ospfLsdbExtRouteAddress | 1.3.6.1.4.1.890.1.5.8.20.40.5.1.2 | IpAddress | read-only | |
| INT ospfLsdbExtRouteMaskbits | 1.3.6.1.4.1.890.1.5.8.20.40.5.1.3 | INTEGER | read-only | |
| ospfVirtualLinkTable | 1.3.6.1.4.1.890.1.5.8.20.40.6 | not-accessible | ||
| ospfVirtualLinkEntry | 1.3.6.1.4.1.890.1.5.8.20.40.6.1 | not-accessible | ||
| STR ospfVirtualLinkName | 1.3.6.1.4.1.890.1.5.8.20.40.6.1.1 | DisplayString | read-write | |
| INT ospfVirtualLinkKeyId | 1.3.6.1.4.1.890.1.5.8.20.40.6.1.2 | INTEGER | read-write |
RFC description
Defines ZyXEL GS-4012F 12-port Gigabit fiber switch specific hardware and management objects.
Start monitoring ZyXEL GS-4012F Gigabit fiber switch (event-log severity/service-affecting-fault status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.