All MIBs › ZYXEL-ES2108-MIB
Organization: ZyXEL
Last Updated: 2004-11-03
Category: ZyXEL ES and GS Switch Platform
Description: Defines ZyXEL ES-2108 8-port Fast Ethernet switch specific hardware and feature management objects.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ZYXEL-ES2108-MIB?
ZYXEL-ES2108-MIB is a vendor-specific module for the ZyXEL ES-2108 8-port Fast Ethernet switch, defining an internal event-logging framework used to track and notify on switch-level operational events. It exposes an event table recording each logged event's sequence number, event ID, name, the instance type/ID/name it relates to, severity, timestamp, description, and whether it is service-affecting, plus companion trap-info objects used to carry event details in SNMP notifications. This is fundamentally a software/hardware status and fault-monitoring facility - operators use the event severity and service-affective flag to detect significant hardware or software conditions (e.g., link changes, configuration changes, faults) as they are logged by the switch, and use the trap notifications for real-time alerting. It relies on standard SNMP notification (SNMPv2-TRAP) mechanisms to deliver the eventTable contents as traps, and is layered on ZyXEL's private enterprise MIB tree. It is typically deployed in small-to-medium enterprise or SOHO network environments where ZyXEL ES-2108 switches are managed and their internal event log needs to be polled or trapped to a central NMS. Engineers can download the ZYXEL-ES2108-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-ES2108-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZyXEL ES-2108 8-port Fast Ethernet switch
Monitoring Examples
Polling eventTable and inspecting eventSeverity together with eventServAffective lets an admin filter for high-severity, service-affecting entries such as a port going down, distinguishing them from routine informational events. eventSeqNum and eventSetTime let a monitoring system detect new events since the last poll and correlate them in time, while eventDescription and eventName give a human-readable summary for alerting. trapNotifications, carrying trapInfoObjects, would be received by an NMS in real time whenever a new event is logged, rather than requiring the table to be polled.
What Can Be Monitored
- logged event severity
- service-affecting event flag
- event sequence/timestamp
- event ID and description
- event traps/notifications
This MIB depends on
Related MIBs
Imported Objects
From BRIDGE-MIB
| dot1dBasePort | OBJECT-TYPE |
From DISMAN-PING-MIB
| OperationResponseStatus |
From IF-MIB
| InterfaceIndexOrZero |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From P-BRIDGE-MIB
| EnabledStatus |
From Q-BRIDGE-MIB
| PortList |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString | |
| sysObjectID |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| MacAddress | |
| RowStatus | |
| StorageType | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zyxel | 1.3.6.1.4.1.890 | |||
| products | 1.3.6.1.4.1.890.1 | |||
| accessSwitch | 1.3.6.1.4.1.890.1.5 | |||
| esSeries | 1.3.6.1.4.1.890.1.5.8 | |||
| es2108 | 1.3.6.1.4.1.890.1.5.8.18 | |||
| sysInfo | 1.3.6.1.4.1.890.1.5.8.18.1 | |||
| INT sysSwPlatformMajorVers | 1.3.6.1.4.1.890.1.5.8.18.1.1 | INTEGER | read-only | SW platform major version, e.g. 3. |
| INT sysSwPlatformMinorVers | 1.3.6.1.4.1.890.1.5.8.18.1.2 | INTEGER | read-only | SW platform minor version, e.g. 50. |
| STR sysSwModelString | 1.3.6.1.4.1.890.1.5.8.18.1.3 | DisplayString | read-only | Model letters, e.g. TJ |
| INT sysSwVersionControlNbr | 1.3.6.1.4.1.890.1.5.8.18.1.4 | INTEGER | read-only | Version control number, e.g. 0. |
| INT sysSwDay | 1.3.6.1.4.1.890.1.5.8.18.1.5 | INTEGER | read-only | SW compilation day, e.g. 19. |
| INT sysSwMonth | 1.3.6.1.4.1.890.1.5.8.18.1.6 | INTEGER | read-only | SW compilation month, e.g. 8. |
| INT sysSwYear | 1.3.6.1.4.1.890.1.5.8.18.1.7 | INTEGER | read-only | SW compilation year, e.g. 2004. |
| INT sysHwMajorVers | 1.3.6.1.4.1.890.1.5.8.18.1.8 | INTEGER | read-only | HW major version number, e.g. 1. |
| INT sysHwMinorVers | 1.3.6.1.4.1.890.1.5.8.18.1.9 | INTEGER | read-only | HW minor version number, e.g. 0. |
| STR sysSerialNumber | 1.3.6.1.4.1.890.1.5.8.18.1.10 | DisplayString | read-only | Serial number |
| rateLimitSetup | 1.3.6.1.4.1.890.1.5.8.18.2 | |||
| ENA rateLimitState | 1.3.6.1.4.1.890.1.5.8.18.2.1 | EnabledStatus | read-write | Ingress/egress rate limiting enabled/disabled for the switch. |
| rateLimitPortTable | 1.3.6.1.4.1.890.1.5.8.18.2.2 | not-accessible | ||
| rateLimitPortEntry | 1.3.6.1.4.1.890.1.5.8.18.2.2.1 | not-accessible | An entry in rateLimitPortTable. | |
| ENA rateLimitPortState | 1.3.6.1.4.1.890.1.5.8.18.2.2.1.1 | EnabledStatus | read-write | Ingress/egress rate limiting enabled/disabled on the port. |
| INT rateLimitPortIngRate | 1.3.6.1.4.1.890.1.5.8.18.2.2.1.2 | INTEGER | read-write | Ingress rate in Kbit/s. The range of FE port is between 64 and 100,000. For GE port, the range is between 64 and 1000,000. |
| INT rateLimitPortEgrRate | 1.3.6.1.4.1.890.1.5.8.18.2.2.1.3 | INTEGER | read-write | Egress rate in Kbit/s. The range of FE port is between 64 and 100,000. For GE port, the range is between 64 and 1000,000. |
| brLimitSetup | 1.3.6.1.4.1.890.1.5.8.18.3 | |||
| ENA brLimitState | 1.3.6.1.4.1.890.1.5.8.18.3.1 | EnabledStatus | read-write | Broadcast/multicast/DLF rate limiting enabled/disabled for the switch. |
| brLimitPortTable | 1.3.6.1.4.1.890.1.5.8.18.3.2 | not-accessible | ||
| brLimitPortEntry | 1.3.6.1.4.1.890.1.5.8.18.3.2.1 | not-accessible | An entry in brLimitPortTable. | |
| ENA brLimitPortState | 1.3.6.1.4.1.890.1.5.8.18.3.2.1.1 | EnabledStatus | read-write | Rate limiting enabled/disabled on the port. |
| INT brLimitPortRate | 1.3.6.1.4.1.890.1.5.8.18.3.2.1.2 | INTEGER | read-write | Allowed rate in in Kbit/s. The range of FE port is between 64 and 100,000. For GE port, the range is between 64 and 1000,000. |
| portSecuritySetup | 1.3.6.1.4.1.890.1.5.8.18.4 | |||
| ENA portSecurityState | 1.3.6.1.4.1.890.1.5.8.18.4.1 | EnabledStatus | read-write | |
| portSecurityPortTable | 1.3.6.1.4.1.890.1.5.8.18.4.2 | not-accessible | ||
| portSecurityPortEntry | 1.3.6.1.4.1.890.1.5.8.18.4.2.1 | not-accessible | An entry in portSecurityPortTable. | |
| ENA portSecurityPortState | 1.3.6.1.4.1.890.1.5.8.18.4.2.1.1 | EnabledStatus | read-write | Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynamic MAC address frames up to the number specified by portSecurityPortCount object. |
| ENA portSecurityPortLearnState | 1.3.6.1.4.1.890.1.5.8.18.4.2.1.2 | EnabledStatus | read-write | MAC address learning enabled/disable on the port. |
| INT portSecurityPortCount | 1.3.6.1.4.1.890.1.5.8.18.4.2.1.3 | INTEGER | read-write | Number of (dynamic) MAC addresses that may be learned on the port. |
| POR portSecurityMacFreeze | 1.3.6.1.4.1.890.1.5.8.18.4.3 | PortList | read-write | This entry is used to execute MacFreeze action to port. It's meaningless while reading this entry. |
| vlanTrunkSetup | 1.3.6.1.4.1.890.1.5.8.18.5 | |||
| vlanTrunkPortTable | 1.3.6.1.4.1.890.1.5.8.18.5.1 | not-accessible | ||
| vlanTrunkPortEntry | 1.3.6.1.4.1.890.1.5.8.18.5.1.1 | not-accessible | An entry in vlanTrunkPortTable. | |
| ENA vlanTrunkPortState | 1.3.6.1.4.1.890.1.5.8.18.5.1.1.1 | EnabledStatus | read-write | VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch. |
| radius8021xSetup | 1.3.6.1.4.1.890.1.5.8.18.6 | |||
| INT radiusLoginPrecedence | 1.3.6.1.4.1.890.1.5.8.18.6.1 | INTEGER | read-write | 1. Local Only 2. Local then RADIUS 3. RADIUS Only |
| radiusAnd8021xServer | 1.3.6.1.4.1.890.1.5.8.18.6.2 | |||
| IP radiusIpAddr | 1.3.6.1.4.1.890.1.5.8.18.6.2.1 | IpAddress | read-write | The IP address of the RADIUS server. |
| INT radiusUdpPort | 1.3.6.1.4.1.890.1.5.8.18.6.2.2 | INTEGER | read-write | The UDP port of the RADIUS server. |
| STR radiusSharedSecret | 1.3.6.1.4.1.890.1.5.8.18.6.2.3 | DisplayString | read-write | Shared secret used for RADIUS and network element authentication. |
| ENA portAuthState | 1.3.6.1.4.1.890.1.5.8.18.6.3 | EnabledStatus | read-write | 802.1x port authentication enabled/disabled for the switch. |
| portAuthTable | 1.3.6.1.4.1.890.1.5.8.18.6.4 | not-accessible | ||
| portAuthEntry | 1.3.6.1.4.1.890.1.5.8.18.6.4.1 | not-accessible | An entry in portAuthTable. | |
| ENA portAuthEntryState | 1.3.6.1.4.1.890.1.5.8.18.6.4.1.1 | EnabledStatus | read-write | 802.1x port authentication enabled or disabled on the port. |
| ENA portReAuthEntryState | 1.3.6.1.4.1.890.1.5.8.18.6.4.1.2 | EnabledStatus | read-write | 802.1x port re-authentication enabled or disabled on the port. |
| INT portReAuthEntryTimer | 1.3.6.1.4.1.890.1.5.8.18.6.4.1.3 | INTEGER | read-write | Re-authentication timer in seconds. |
| snmpSetup | 1.3.6.1.4.1.890.1.5.8.18.7 | |||
| STR snmpGetCommunity | 1.3.6.1.4.1.890.1.5.8.18.7.1 | DisplayString | read-write | |
| STR snmpSetCommunity | 1.3.6.1.4.1.890.1.5.8.18.7.2 | DisplayString | read-write | |
| STR snmpTrapCommunity | 1.3.6.1.4.1.890.1.5.8.18.7.3 | DisplayString | read-write | |
| snmpTrapDestTable | 1.3.6.1.4.1.890.1.5.8.18.7.4 | not-accessible | ||
| snmpTrapDestEntry | 1.3.6.1.4.1.890.1.5.8.18.7.4.1 | not-accessible | An entry in snmpTrapDestTable. | |
| IP snmpTrapDestIP | 1.3.6.1.4.1.890.1.5.8.18.7.4.1.1 | IpAddress | read-only | IP address of trap destination. |
| ROW snmpTrapDestRowStatus | 1.3.6.1.4.1.890.1.5.8.18.7.4.1.2 | RowStatus | read-create | |
| dateTimeServerSetup | 1.3.6.1.4.1.890.1.5.8.18.8 | |||
| INT dateTimeServerType | 1.3.6.1.4.1.890.1.5.8.18.8.1 | INTEGER | read-write | The time service protocol. |
| IP dateTimeServerIP | 1.3.6.1.4.1.890.1.5.8.18.8.2 | IpAddress | read-write | IP address of time server. |
| INT dateTimeZone | 1.3.6.1.4.1.890.1.5.8.18.8.3 | INTEGER | read-write | The time difference between UTC. Ex: +01 |
| INT dateTimeNewDateYear | 1.3.6.1.4.1.890.1.5.8.18.8.4 | INTEGER | read-write | The new date in year. |
| INT dateTimeNewDateMonth | 1.3.6.1.4.1.890.1.5.8.18.8.5 | INTEGER | read-write | The new date in month. |
| INT dateTimeNewDateDay | 1.3.6.1.4.1.890.1.5.8.18.8.6 | INTEGER | read-write | The new date in day. |
| INT dateTimeNewTimeHour | 1.3.6.1.4.1.890.1.5.8.18.8.7 | INTEGER | read-write | The new time in hour. |
| INT dateTimeNewTimeMinute | 1.3.6.1.4.1.890.1.5.8.18.8.8 | INTEGER | read-write | The new time in minute. |
| INT dateTimeNewTimeSecond | 1.3.6.1.4.1.890.1.5.8.18.8.9 | INTEGER | read-write | The new time in second. |
| sysMgmt | 1.3.6.1.4.1.890.1.5.8.18.9 | |||
| INT sysMgmtConfigSave | 1.3.6.1.4.1.890.1.5.8.18.9.1 | INTEGER | read-write | If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config will be written to the booting one. |
| INT sysMgmtBootupConfig | 1.3.6.1.4.1.890.1.5.8.18.9.2 | INTEGER | read-write | The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can change the value of write index by CLI / MIB. |
| INT sysMgmtReboot | 1.3.6.1.4.1.890.1.5.8.18.9.3 | INTEGER | read-write | Reboot switch from SNMP. 1:Reboot, 0:Nothing |
| INT sysMgmtDefaultConfig | 1.3.6.1.4.1.890.1.5.8.18.9.4 | INTEGER | read-write | Erase running config and reset to default. |
| INT sysMgmtLastActionStatus | 1.3.6.1.4.1.890.1.5.8.18.9.5 | INTEGER | read-only | Display status of last mgmt action. |
| layer2Setup | 1.3.6.1.4.1.890.1.5.8.18.10 | |||
| INT vlanTypeSetup | 1.3.6.1.4.1.890.1.5.8.18.10.1 | INTEGER | read-write | |
| ENA igmpSnoopingStateSetup | 1.3.6.1.4.1.890.1.5.8.18.10.2 | EnabledStatus | read-write | |
| ENA tagVlanPortIsolationState | 1.3.6.1.4.1.890.1.5.8.18.10.3 | EnabledStatus | read-write | |
| ENA stpState | 1.3.6.1.4.1.890.1.5.8.18.10.4 | EnabledStatus | read-write | |
| ENA tagVlanIngressCheckState | 1.3.6.1.4.1.890.1.5.8.18.10.5 | EnabledStatus | read-write | |
| ipSetup | 1.3.6.1.4.1.890.1.5.8.18.11 | |||
| IP dnsIpAddress | 1.3.6.1.4.1.890.1.5.8.18.11.1 | IpAddress | read-write | |
| defaultMgmtIpSetup | 1.3.6.1.4.1.890.1.5.8.18.11.2 | |||
| INT defaultMgmtIpType | 1.3.6.1.4.1.890.1.5.8.18.11.2.1 | INTEGER | read-write | |
| INT defaultMgmtVid | 1.3.6.1.4.1.890.1.5.8.18.11.2.2 | INTEGER | read-write | |
| IP defaultMgmtStaticIp | 1.3.6.1.4.1.890.1.5.8.18.11.2.3 | IpAddress | read-write | |
| IP defaultMgmtStaticSubnetMask | 1.3.6.1.4.1.890.1.5.8.18.11.2.4 | IpAddress | read-write | |
| IP defaultMgmtStaticGateway | 1.3.6.1.4.1.890.1.5.8.18.11.2.5 | IpAddress | read-write | |
| INT maxNumOfMgmtIp | 1.3.6.1.4.1.890.1.5.8.18.11.3 | INTEGER | read-only | |
| mgmtIpTable | 1.3.6.1.4.1.890.1.5.8.18.11.6 | not-accessible | ||
| mgmtIpEntry | 1.3.6.1.4.1.890.1.5.8.18.11.6.1 | not-accessible | An entry in mgmtIpTable. | |
| IP mgmtEntryIp | 1.3.6.1.4.1.890.1.5.8.18.11.6.1.1 | IpAddress | read-write | |
| IP mgmtEntrySubnetMask | 1.3.6.1.4.1.890.1.5.8.18.11.6.1.2 | IpAddress | read-write | |
| IP mgmtEntryGateway | 1.3.6.1.4.1.890.1.5.8.18.11.6.1.3 | IpAddress | read-write | |
| INT mgmtEntryVid | 1.3.6.1.4.1.890.1.5.8.18.11.6.1.4 | INTEGER | read-only | |
| ENA mgmtEntryManageable | 1.3.6.1.4.1.890.1.5.8.18.11.6.1.5 | EnabledStatus | read-write | |
| ROW mgmtEntryRowStatus | 1.3.6.1.4.1.890.1.5.8.18.11.6.1.6 | RowStatus | read-create | |
| filterSetup | 1.3.6.1.4.1.890.1.5.8.18.12 | |||
| filterTable | 1.3.6.1.4.1.890.1.5.8.18.12.1 | not-accessible | ||
| filterEntry | 1.3.6.1.4.1.890.1.5.8.18.12.1.1 | not-accessible | An entry in filterTable. | |
| STR filterName | 1.3.6.1.4.1.890.1.5.8.18.12.1.1.1 | DisplayString | read-write | |
| MAC filterMacAddr | 1.3.6.1.4.1.890.1.5.8.18.12.1.1.2 | MacAddress | not-accessible | |
| INT filterVid | 1.3.6.1.4.1.890.1.5.8.18.12.1.1.3 | INTEGER | not-accessible | |
| ROW filterRowStatus | 1.3.6.1.4.1.890.1.5.8.18.12.1.1.4 | RowStatus | read-create | |
| mirrorSetup | 1.3.6.1.4.1.890.1.5.8.18.13 | |||
| ENA mirrorState | 1.3.6.1.4.1.890.1.5.8.18.13.1 | EnabledStatus | read-write | |
| INT mirrorMonitorPort | 1.3.6.1.4.1.890.1.5.8.18.13.2 | INTEGER | read-write | |
| INT mirrorIngActionState | 1.3.6.1.4.1.890.1.5.8.18.13.3 | INTEGER | read-write | |
| MAC mirrorIngMacAddr | 1.3.6.1.4.1.890.1.5.8.18.13.4 | MacAddress | read-write | |
| INT mirrorEgrActionState | 1.3.6.1.4.1.890.1.5.8.18.13.5 | INTEGER | read-write | |
| MAC mirrorEgrMacAddr | 1.3.6.1.4.1.890.1.5.8.18.13.6 | MacAddress | read-write | |
| mirrorTable | 1.3.6.1.4.1.890.1.5.8.18.13.7 | not-accessible | ||
| mirrorEntry | 1.3.6.1.4.1.890.1.5.8.18.13.7.1 | not-accessible | An entry in mirrorTable. | |
| ENA mirrorMirroredState | 1.3.6.1.4.1.890.1.5.8.18.13.7.1.1 | EnabledStatus | read-write | |
| INT mirrorDirection | 1.3.6.1.4.1.890.1.5.8.18.13.7.1.2 | INTEGER | read-write | |
| aggrSetup | 1.3.6.1.4.1.890.1.5.8.18.14 | |||
| ENA aggrState | 1.3.6.1.4.1.890.1.5.8.18.14.1 | EnabledStatus | read-write | |
| INT aggrSystemPriority | 1.3.6.1.4.1.890.1.5.8.18.14.2 | INTEGER | read-write | |
| aggrGroupTable | 1.3.6.1.4.1.890.1.5.8.18.14.3 | not-accessible | ||
| aggrGroupEntry | 1.3.6.1.4.1.890.1.5.8.18.14.3.1 | not-accessible | An entry in aggrGroupTable. | |
| INT aggrGroupIndex | 1.3.6.1.4.1.890.1.5.8.18.14.3.1.1 | INTEGER | read-only | |
| ENA aggrGroupState | 1.3.6.1.4.1.890.1.5.8.18.14.3.1.2 | EnabledStatus | read-write | |
| ENA aggrGroupDynamicState | 1.3.6.1.4.1.890.1.5.8.18.14.3.1.3 | EnabledStatus | read-write | |
| aggrPortTable | 1.3.6.1.4.1.890.1.5.8.18.14.4 | not-accessible | ||
| aggrPortEntry | 1.3.6.1.4.1.890.1.5.8.18.14.4.1 | not-accessible | An entry in aggrPortTable. | |
| INT aggrPortGroup | 1.3.6.1.4.1.890.1.5.8.18.14.4.1.1 | INTEGER | read-write | |
| INT aggrPortDynamicStateTimeout | 1.3.6.1.4.1.890.1.5.8.18.14.4.1.2 | INTEGER | read-write | |
| accessCtlSetup | 1.3.6.1.4.1.890.1.5.8.18.15 | |||
| accessCtlTable | 1.3.6.1.4.1.890.1.5.8.18.15.1 | not-accessible | ||
| accessCtlEntry | 1.3.6.1.4.1.890.1.5.8.18.15.1.1 | not-accessible | An entry in accessCtlTable. | |
| INT accessCtlService | 1.3.6.1.4.1.890.1.5.8.18.15.1.1.1 | INTEGER | read-only | |
| ENA accessCtlEnable | 1.3.6.1.4.1.890.1.5.8.18.15.1.1.2 | EnabledStatus | read-write | |
| INT accessCtlServicePort | 1.3.6.1.4.1.890.1.5.8.18.15.1.1.3 | INTEGER | read-write | |
| INT accessCtlTimeout | 1.3.6.1.4.1.890.1.5.8.18.15.1.1.4 | INTEGER | read-write | |
| securedClientTable | 1.3.6.1.4.1.890.1.5.8.18.15.2 | not-accessible | ||
| securedClientEntry | 1.3.6.1.4.1.890.1.5.8.18.15.2.1 | not-accessible | An entry in securedClientTable. | |
| INT securedClientIndex | 1.3.6.1.4.1.890.1.5.8.18.15.2.1.1 | INTEGER | read-only | |
| ENA securedClientEnable | 1.3.6.1.4.1.890.1.5.8.18.15.2.1.2 | EnabledStatus | read-write | |
| IP securedClientStartIp | 1.3.6.1.4.1.890.1.5.8.18.15.2.1.3 | IpAddress | read-write | |
| IP securedClientEndIp | 1.3.6.1.4.1.890.1.5.8.18.15.2.1.4 | IpAddress | read-write | |
| BIT securedClientService | 1.3.6.1.4.1.890.1.5.8.18.15.2.1.5 | Bits | read-write | |
| queuingMethodSetup | 1.3.6.1.4.1.890.1.5.8.18.16 | |||
| INT queuingMethodType | 1.3.6.1.4.1.890.1.5.8.18.16.1 | INTEGER | read-write | |
| queuingMethodTable | 1.3.6.1.4.1.890.1.5.8.18.16.2 | not-accessible | ||
| queuingMethodEntry | 1.3.6.1.4.1.890.1.5.8.18.16.2.1 | not-accessible | An entry in queuingMethodTable. | |
| INT queuingMethodQueue | 1.3.6.1.4.1.890.1.5.8.18.16.2.1.1 | INTEGER | read-only | 0...3 |
| INT queuingMethodWeight | 1.3.6.1.4.1.890.1.5.8.18.16.2.1.2 | INTEGER | read-write | 1...15 |
| staticRouteSetup | 1.3.6.1.4.1.890.1.5.8.18.17 | |||
| INT maxNumberOfStaticRoutes | 1.3.6.1.4.1.890.1.5.8.18.17.1 | INTEGER | read-only | |
| staticRouteTable | 1.3.6.1.4.1.890.1.5.8.18.17.2 | not-accessible | ||
| staticRouteEntry | 1.3.6.1.4.1.890.1.5.8.18.17.2.1 | not-accessible | An entry in staticRouteTable. | |
| STR staticRouteName | 1.3.6.1.4.1.890.1.5.8.18.17.2.1.1 | DisplayString | read-write | |
| IP staticRouteIp | 1.3.6.1.4.1.890.1.5.8.18.17.2.1.2 | IpAddress | not-accessible | |
| IP staticRouteMask | 1.3.6.1.4.1.890.1.5.8.18.17.2.1.3 | IpAddress | not-accessible | |
| IP staticRouteGateway | 1.3.6.1.4.1.890.1.5.8.18.17.2.1.4 | IpAddress | read-write | |
| INT staticRouteMetric | 1.3.6.1.4.1.890.1.5.8.18.17.2.1.5 | INTEGER | read-write | |
| ROW staticRouteRowStatus | 1.3.6.1.4.1.890.1.5.8.18.17.2.1.6 | RowStatus | read-create | |
| arpInfo | 1.3.6.1.4.1.890.1.5.8.18.18 | |||
| arpTable | 1.3.6.1.4.1.890.1.5.8.18.18.1 | not-accessible | ||
| arpEntry | 1.3.6.1.4.1.890.1.5.8.18.18.1.1 | not-accessible | An entry in arpTable. | |
| INT arpIndex | 1.3.6.1.4.1.890.1.5.8.18.18.1.1.1 | INTEGER | read-only | |
| IP arpIpAddr | 1.3.6.1.4.1.890.1.5.8.18.18.1.1.2 | IpAddress | read-only | |
| MAC arpMacAddr | 1.3.6.1.4.1.890.1.5.8.18.18.1.1.3 | MacAddress | read-only | |
| INT arpMacVid | 1.3.6.1.4.1.890.1.5.8.18.18.1.1.4 | INTEGER | read-only | |
| INT arpType | 1.3.6.1.4.1.890.1.5.8.18.18.1.1.5 | INTEGER | read-only | |
| portOpModeSetup | 1.3.6.1.4.1.890.1.5.8.18.19 | |||
| portOpModePortTable | 1.3.6.1.4.1.890.1.5.8.18.19.1 | not-accessible | ||
| portOpModePortEntry | 1.3.6.1.4.1.890.1.5.8.18.19.1.1 | not-accessible | An entry in portOpModePortTable. | |
| INT portOpModePortSpeedDuplex | 1.3.6.1.4.1.890.1.5.8.18.19.1.1.1 | INTEGER | read-write | |
| INT portOpModePortFlowCntl | 1.3.6.1.4.1.890.1.5.8.18.19.1.1.2 | INTEGER | read-write | |
| OCT portOpModePortName | 1.3.6.1.4.1.890.1.5.8.18.19.1.1.3 | OCTET STRING | read-write | |
| INT portOpModePortModuleType | 1.3.6.1.4.1.890.1.5.8.18.19.1.1.4 | INTEGER | read-only | |
| INT portOpModePortLinkUpType | 1.3.6.1.4.1.890.1.5.8.18.19.1.1.5 | INTEGER | read-only | |
| ENA portOpModePortIntrusionLock | 1.3.6.1.4.1.890.1.5.8.18.19.1.1.6 | EnabledStatus | read-write | |
| INT portOpModePortLBTestStatus | 1.3.6.1.4.1.890.1.5.8.18.19.1.1.7 | INTEGER | read-only | This entry display latest loopback test status of port while performing loopback test. |
| portBasedVlanSetup | 1.3.6.1.4.1.890.1.5.8.18.20 | |||
| portBasedVlanPortListTable | 1.3.6.1.4.1.890.1.5.8.18.20.1 | not-accessible | ||
| portBasedVlanPortListEntry | 1.3.6.1.4.1.890.1.5.8.18.20.1.1 | not-accessible | An entry in portBasedVlanPortListTable. | |
| POR portBasedVlanPortListMembers | 1.3.6.1.4.1.890.1.5.8.18.20.1.1.1 | PortList | read-write | |
| diffservSetup | 1.3.6.1.4.1.890.1.5.8.18.21 | |||
| ENA diffservState | 1.3.6.1.4.1.890.1.5.8.18.21.1 | EnabledStatus | read-write | |
| diffservMapTable | 1.3.6.1.4.1.890.1.5.8.18.21.2 | not-accessible | ||
| diffservMapEntry | 1.3.6.1.4.1.890.1.5.8.18.21.2.1 | not-accessible | An entry in diffservMapTable. | |
| INT diffservMapDscp | 1.3.6.1.4.1.890.1.5.8.18.21.2.1.1 | INTEGER | read-only | 0-63 |
| INT diffservMapPriority | 1.3.6.1.4.1.890.1.5.8.18.21.2.1.2 | INTEGER | read-write | 0-7 |
| diffservPortTable | 1.3.6.1.4.1.890.1.5.8.18.21.3 | not-accessible | ||
| diffservPortEntry | 1.3.6.1.4.1.890.1.5.8.18.21.3.1 | not-accessible | An entry in diffservPortTable. | |
| ENA diffservPortState | 1.3.6.1.4.1.890.1.5.8.18.21.3.1.1 | EnabledStatus | read-write | |
| clusterSetup | 1.3.6.1.4.1.890.1.5.8.18.22 | |||
| clusterManager | 1.3.6.1.4.1.890.1.5.8.18.22.1 | |||
| INT clusterMaxNumOfManager | 1.3.6.1.4.1.890.1.5.8.18.22.1.1 | INTEGER | read-only | |
| clusterManagerTable | 1.3.6.1.4.1.890.1.5.8.18.22.1.2 | not-accessible | ||
| clusterManagerEntry | 1.3.6.1.4.1.890.1.5.8.18.22.1.2.1 | not-accessible | An entry in clusterManagerTable. | |
| INT clusterManagerVid | 1.3.6.1.4.1.890.1.5.8.18.22.1.2.1.1 | INTEGER | read-only | |
| STR clusterManagerName | 1.3.6.1.4.1.890.1.5.8.18.22.1.2.1.2 | DisplayString | read-write | |
| ROW clusterManagerRowStatus | 1.3.6.1.4.1.890.1.5.8.18.22.1.2.1.3 | RowStatus | read-create | |
| clusterMembers | 1.3.6.1.4.1.890.1.5.8.18.22.2 | |||
| INT clusterMaxNumOfMember | 1.3.6.1.4.1.890.1.5.8.18.22.2.1 | INTEGER | read-only | |
| clusterMemberTable | 1.3.6.1.4.1.890.1.5.8.18.22.2.2 | not-accessible | ||
| clusterMemberEntry | 1.3.6.1.4.1.890.1.5.8.18.22.2.2.1 | not-accessible | An entry in clusterMemberTable. | |
| MAC clusterMemberMac | 1.3.6.1.4.1.890.1.5.8.18.22.2.2.1.1 | MacAddress | read-only | |
| STR clusterMemberName | 1.3.6.1.4.1.890.1.5.8.18.22.2.2.1.2 | DisplayString | read-only | |
| STR clusterMemberModel | 1.3.6.1.4.1.890.1.5.8.18.22.2.2.1.3 | DisplayString | read-only | |
| STR clusterMemberPassword | 1.3.6.1.4.1.890.1.5.8.18.22.2.2.1.4 | DisplayString | read-write | |
| ROW clusterMemberRowStatus | 1.3.6.1.4.1.890.1.5.8.18.22.2.2.1.5 | RowStatus | read-create | |
| clusterCandidates | 1.3.6.1.4.1.890.1.5.8.18.22.3 | |||
| clusterCandidateTable | 1.3.6.1.4.1.890.1.5.8.18.22.3.1 | not-accessible | ||
| clusterCandidateEntry | 1.3.6.1.4.1.890.1.5.8.18.22.3.1.1 | not-accessible | An entry in clusterCandidateTable. | |
| MAC clusterCandidateMac | 1.3.6.1.4.1.890.1.5.8.18.22.3.1.1.1 | MacAddress | read-only | |
| STR clusterCandidateName | 1.3.6.1.4.1.890.1.5.8.18.22.3.1.1.2 | DisplayString | read-only | |
| STR clusterCandidateModel | 1.3.6.1.4.1.890.1.5.8.18.22.3.1.1.3 | DisplayString | read-only | |
| clusterStatus | 1.3.6.1.4.1.890.1.5.8.18.22.4 | |||
| INT clusterStatusRole | 1.3.6.1.4.1.890.1.5.8.18.22.4.1 | INTEGER | read-only | |
| STR clusterStatusManager | 1.3.6.1.4.1.890.1.5.8.18.22.4.2 | DisplayString | read-only | |
| INT clsuterStatusMaxNumOfMember | 1.3.6.1.4.1.890.1.5.8.18.22.4.3 | INTEGER | read-only | |
| clusterStatusMemberTable | 1.3.6.1.4.1.890.1.5.8.18.22.4.4 | not-accessible | ||
| clusterStatusMemberEntry | 1.3.6.1.4.1.890.1.5.8.18.22.4.4.1 | not-accessible | An entry in clusterStatusMemberTable. | |
| MAC clusterStatusMemberMac | 1.3.6.1.4.1.890.1.5.8.18.22.4.4.1.1 | MacAddress | read-only | |
| STR clusterStatusMemberName | 1.3.6.1.4.1.890.1.5.8.18.22.4.4.1.2 | DisplayString | read-only | |
| STR clusterStatusMemberModel | 1.3.6.1.4.1.890.1.5.8.18.22.4.4.1.3 | DisplayString | read-only | |
| INT clusterStatusMemberStatus | 1.3.6.1.4.1.890.1.5.8.18.22.4.4.1.4 | INTEGER | read-only | |
| faultMIB | 1.3.6.1.4.1.890.1.5.8.18.26 | Fault event table definitions | ||
| eventObjects | 1.3.6.1.4.1.890.1.5.8.18.26.1 | |||
| eventTable | 1.3.6.1.4.1.890.1.5.8.18.26.1.1 | not-accessible | A list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault is cleared it is deleted from the event table. | |
| eventEntry | 1.3.6.1.4.1.890.1.5.8.18.26.1.1.1 | not-accessible | An entry containing information about an event in the event table. | |
| I32 eventSeqNum | 1.3.6.1.4.1.890.1.5.8.18.26.1.1.1.1 | Integer32 | read-only | This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is incremented when - the state of a normal type fault is set on (the same sequence number is present in the events table as well as in the trap that is sent to notify about the fault on event) - delta event occurs (sequence number present in trap message) - the state of a normal type fault is set off (sequence number present in trap that is sent to notify for clearing). |
| EVE eventEventId | 1.3.6.1.4.1.890.1.5.8.18.26.1.1.1.2 | EventIdNumber | read-only | This variable represents the event ID which uniquely identifies the event in the entire system. |
| STR eventName | 1.3.6.1.4.1.890.1.5.8.18.26.1.1.1.3 | DisplayString | read-only | This variable represents the name of the event, for example 'Ethernet Link Down' |
| INS eventInstanceType | 1.3.6.1.4.1.890.1.5.8.18.26.1.1.1.4 | InstanceType | read-only | This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For more details see the textual conventions section. AFFECTS: eventInstanceId, eventInstanceName |
| STR eventInstanceId | 1.3.6.1.4.1.890.1.5.8.18.26.1.1.1.5 | DisplayString | read-only | This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceType |
| STR eventInstanceName | 1.3.6.1.4.1.890.1.5.8.18.26.1.1.1.6 | DisplayString | read-only | This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstanceType |
| EVE eventSeverity | 1.3.6.1.4.1.890.1.5.8.18.26.1.1.1.7 | EventSeverity | read-only | This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention to prevent/reduce system down time. Major events require quick attention and Minor events possibly require some attention. Informational events indicate the occurrence of events that may need to be investigated. |
| UTC eventSetTime | 1.3.6.1.4.1.890.1.5.8.18.26.1.1.1.8 | UtcTimeStamp | read-only | This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM. |
| STR eventDescription | 1.3.6.1.4.1.890.1.5.8.18.26.1.1.1.9 | DisplayString | read-only | This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no usefull information to report. The maximum length of this string is 255 characters. |
| EVE eventServAffective | 1.3.6.1.4.1.890.1.5.8.18.26.1.1.1.10 | EventServiceAffective | read-only | This variable indicates whether the event is service affective or not |
| faultTrapsMIB | 1.3.6.1.4.1.890.1.5.8.18.27 | Fault event trap definitions | ||
| trapInfoObjects | 1.3.6.1.4.1.890.1.5.8.18.27.1 | |||
| I32 trapRefSeqNum | 1.3.6.1.4.1.890.1.5.8.18.27.1.1 | Integer32 | read-only | Indicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications. |
| EVE trapPersistence | 1.3.6.1.4.1.890.1.5.8.18.27.1.2 | EventPersistence | read-only | Indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap notifications. |
| I32 trapSenderNodeId | 1.3.6.1.4.1.890.1.5.8.18.27.1.3 | Integer32 | read-only | Represents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications. |
| trapNotifications | 1.3.6.1.4.1.890.1.5.8.18.27.2 | |||
| NTF eventOnTrap | 1.3.6.1.4.1.890.1.5.8.18.27.2.1 | This trap is used to inform network management system that a delta fault event (events that are automatically cleared) has occured or a normal fault event (not automatically cleared) state has been set on. Objects are used as follows: - eventSeqNum is the sequence number of the event. For normal type of events must equal to the sequence number of the event in the events table. - eventEventId specifies what fault event has occured. - eventName specifies the name of the fault event. - eventSetTime indicates when fault event has occured (delta events) or when fault has been set on (normal events). - eventSeverity reports the severity level of the event. - eventInstanceType indicates what kind of object is faulty. - eventInstanceId specifies what instance is faulty. - eventInstanceName may contain textual description for the faulty object. - eventServAffective specifies whether the event is immediately service affcetive. - eventDescription reports possible additional information about the event. - trapPersistence tells whether this event is a delta or normal event. - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the fault event. For more information see the eventTable specification | ||
| NTF eventClearedTrap | 1.3.6.1.4.1.890.1.5.8.18.27.2.2 | This trap is used to inform network management system that a normal type fault event has been cleared (state set off). Objects are used as follows: - eventSeqNum is the sequence number of the this clearing event. Note that the sequence number of the cleared event is reported in the trapRefSeqNum object. - eventEventId specifies what event has been cleared. - eventSetTime indicates when fault event has been cleared. - eventInstanceType indicates what kind of object has been faulty. - eventInstanceId specifies what instance has been faulty. - trapRefSeqNum specifies the sequence number of the cleared event (i.e. the sequence number was assigned for the event in the events table). - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the clearing event. For more information see the eventTable specification |
RFC description
Zyxel ES2108 access switch management MIB. Provides system information, software version control, and switch-specific configuration objects.
Start monitoring ZyXEL ES-2108 8-port Fast Ethernet switch (event-log severity/service-affecting-fault trap status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.