ZXROSNG-TUNNEL-POLICY-MIB

All MIBs › ZXROSNG-TUNNEL-POLICY-MIB

Organization: IETF Operations and Management Area

Last Updated: 2016-10-17

Category: ZXROSNG Next-Generation Transport

Description: Manages ZTE ZXROSNG tunnel policy definitions for selecting and load-balancing traffic across MPLS tunnels.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXROSNG-TUNNEL-POLICY-MIB?

ZXROSNG-TUNNEL-POLICY-MIB is a ZTE MIB for the ZXROSNG platform that defines tunnel policy objects used to select and load-balance traffic across MPLS tunnels (including TE tunnels and pseudowires), building on textual conventions originally introduced for tunnel policy in RFC 3595. Its data is primarily configuration-oriented: named tunnel-policy instances specifying a tunnel selection method, fallback behavior, auto-creation of tunnels, and mappings to specific TE tunnels or ECMP groups, plus a result table for pseudowire (PW) tunnel selection outcomes. In monitoring terms it is used to verify that traffic-steering policy software is applying the intended tunnel-selection logic -- confirming which TE tunnel or ECMP group a given policy instance resolves to, and whether fallback to an alternate tunnel has been triggered -- rather than monitoring physical hardware health. It explicitly derives its textual conventions from RFC 3595, tying it to IETF tunnel-policy standards, and it interoperates with the device's MPLS-TE tunnel and route-map (RMP) infrastructure. It is typically deployed on ZXROSNG-based provider edge/core routers that use MPLS TE and pseudowires with policy-based traffic steering. Engineers implementing or auditing this functionality typically reference the ZXROSNG-TUNNEL-POLICY-MIB RFC/standard documentation for the authoritative specification.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXROSNG-TUNNEL-POLICY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXROSNG-based router

Monitoring Examples

An admin would poll zxTunnelPolicyInstTable/zxTunnelPolicyInstEntry, indexed by zxTunnelPolicyInstName, to check zxTunnelPolicyInstTunnelSelectType and confirm whether a policy is using a specific zxTunnelPolicyInstTeTunnelName or an zxTunnelPolicyInstTeEcmpGroupId for load balancing across multiple TE tunnels. The zxTunnelPolicyInstDisableFallBack flag shows whether fallback to a non-preferred tunnel is disabled, which would explain traffic loss if the preferred tunnel goes down and zxTunnelPolicyInstAutoCreate is also off. zxTunnelPolicyPWSelectResultTable would be checked to confirm which tunnel a pseudowire actually resolved to, useful when troubleshooting a pseudowire that is not following its configured zxTunnelPolicyInstSelSeq selection sequence or referenced route-map (zxTunnelPolicyInstRmpName).

What Can Be Monitored

tunnel policy selection type
fallback behavior on tunnel failure
auto-create tunnel setting
TE tunnel/ECMP group binding per policy
pseudowire tunnel selection result
policy selection sequence and route-map reference

Imported Objects

From IPV6-TC

Ipv6Address

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

From ZXR10-SMI

zxr10RosngMIB

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
zxTunnelPolicyMIB	1.3.6.1.4.1.3902.3.6000.203			This MIB module provides commonly used textual conventions for tunel policy. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3595, see the RFC itself for full legal notices.
zxTunnelPolicyInstTable	1.3.6.1.4.1.3902.3.6000.203.1		not-accessible	tunnel policy instance info.
zxTunnelPolicyInstEntry	1.3.6.1.4.1.3902.3.6000.203.1.1		not-accessible	An entry containing management information applicable to a tunnel policy instance.
STR zxTunnelPolicyInstName	1.3.6.1.4.1.3902.3.6000.203.1.1.1	DisplayString	read-only	tunnel policy name.
INT zxTunnelPolicyInstTunnelSelectType	1.3.6.1.4.1.3902.3.6000.203.1.1.2	INTEGER	read-only	tunnel policy select type.
INT zxTunnelPolicyInstDisableFallBack	1.3.6.1.4.1.3902.3.6000.203.1.1.3	INTEGER	read-only	disable fall back.
INT zxTunnelPolicyInstAutoCreate	1.3.6.1.4.1.3902.3.6000.203.1.1.4	INTEGER	read-only	auto creat.
INT zxTunnelPolicyInstSelSeq	1.3.6.1.4.1.3902.3.6000.203.1.1.5	INTEGER	read-only	select sequence.
STR zxTunnelPolicyInstTeTunnelName	1.3.6.1.4.1.3902.3.6000.203.1.1.6	DisplayString	read-only	tunnel interface name.
U32 zxTunnelPolicyInstTeEcmpGroupId	1.3.6.1.4.1.3902.3.6000.203.1.1.7	Unsigned32	read-only	te ecmp group id.
STR zxTunnelPolicyInstRmpName	1.3.6.1.4.1.3902.3.6000.203.1.1.8	DisplayString	read-only	route map name.
zxTunnelPolicyPWSelectResultTable	1.3.6.1.4.1.3902.3.6000.203.2		not-accessible	pw tunnel policy select result info..
zxTunnelPolicyPWSelectResultEntry	1.3.6.1.4.1.3902.3.6000.203.2.1		not-accessible	An entry containing management information applicable to a tunnel policy select result info.
STR zxTunnelPolicyPWSelectResultPwName	1.3.6.1.4.1.3902.3.6000.203.2.1.1	DisplayString	read-only	pw name.
STR zxTunnelPolicyPWSelectResultTeTunnelName	1.3.6.1.4.1.3902.3.6000.203.2.1.2	DisplayString	read-only	te tunnel name.
U32 zxTunnelPolicyPWSelectResultTeTunnelId	1.3.6.1.4.1.3902.3.6000.203.2.1.3	Unsigned32	read-only	te tunnel id.
U32 zxTunnelPolicyPWSelectResultBandwidth	1.3.6.1.4.1.3902.3.6000.203.2.1.4	Unsigned32	read-only	pw bandwidth.
INT zxTunnelPolicyPWSelectResultTunnelPolicyExistFlag	1.3.6.1.4.1.3902.3.6000.203.2.1.5	INTEGER	read-only	tunnel policy instance existing flag.
STR zxTunnelPolicyPWSelectResultTunnelPolicyName	1.3.6.1.4.1.3902.3.6000.203.2.1.6	DisplayString	read-only	tunnel-policy name.
INT zxTunnelPolicyPWSelectResultSelectType	1.3.6.1.4.1.3902.3.6000.203.2.1.7	INTEGER	read-only	tunnel policy select type.
INT zxTunnelPolicyPWSelectResultLspType	1.3.6.1.4.1.3902.3.6000.203.2.1.8	INTEGER	read-only	lsp type.
U32 zxTunnelPolicyPWSelRstEcmpGrpId	1.3.6.1.4.1.3902.3.6000.203.2.1.9	Unsigned32	read-only	te ecmp group id.
zxTunnelPolicyVRFSelectResultTable	1.3.6.1.4.1.3902.3.6000.203.3		not-accessible	pw tunnel policy select result info..
zxTunnelPolicyVRFSelectResultEntry	1.3.6.1.4.1.3902.3.6000.203.3.1		not-accessible	An entry containing management information applicable to a tunnel policy select result info.
STR zxTunnelPolicyVRFSelectResultVrfName	1.3.6.1.4.1.3902.3.6000.203.3.1.1	DisplayString	read-only	VRF name.
IP zxTunnelPolicyVRFSelectResultPeer	1.3.6.1.4.1.3902.3.6000.203.3.1.2	IpAddress	read-only	VRF peer ip.
STR zxTunnelPolicyVRFSelectResultTeTunnelName	1.3.6.1.4.1.3902.3.6000.203.3.1.3	DisplayString	read-only	te tunnel name.
U32 zxTunnelPolicyVRFSelectResultTeTunnelId	1.3.6.1.4.1.3902.3.6000.203.3.1.4	Unsigned32	read-only	te tunnel id.
U32 zxTunnelPolicyVRFSelectResultBandwidth	1.3.6.1.4.1.3902.3.6000.203.3.1.5	Unsigned32	read-only	VRF bandwidth.
INT zxTunnelPolicyVRFSelectResultTunnelPolicyExistFlag	1.3.6.1.4.1.3902.3.6000.203.3.1.6	INTEGER	read-only	tunnel policy instance existing flag.
STR zxTunnelPolicyVRFSelectResultTunnelPolicyName	1.3.6.1.4.1.3902.3.6000.203.3.1.7	DisplayString	read-only	tunnel-policy name.
INT zxTunnelPolicyVRFSelectResultSelectType	1.3.6.1.4.1.3902.3.6000.203.3.1.8	INTEGER	read-only	tunnel policy select type.
INT zxTunnelPolicyVRFSelectResultLspType	1.3.6.1.4.1.3902.3.6000.203.3.1.9	INTEGER	read-only	lsp type.
U32 zxTunnelPolicyVRFSelRstEcmpGrp	1.3.6.1.4.1.3902.3.6000.203.3.1.10	Unsigned32	read-only	te ecmp group id.
zxTunnelPolicyVRFNh6SelRstTable	1.3.6.1.4.1.3902.3.6000.203.4		not-accessible	A table that contains the information of the VRF nexthop is ipv6 address using tunnel policy select result.
zxTunnelPolicyVRFNh6SelRstEntry	1.3.6.1.4.1.3902.3.6000.203.4.1		not-accessible	A list of objects containing information applicable to a tunnel policy selecting result.
STR zxTunnelPolicyNh6SelRstVrfName	1.3.6.1.4.1.3902.3.6000.203.4.1.1	DisplayString	not-accessible	The name of the VRF which applies tunnel policy.
ADR zxTunnelPolicyNh6SelRstVrfPeer	1.3.6.1.4.1.3902.3.6000.203.4.1.2	Ipv6Address	not-accessible	The ipv6 address of the neighbor of the VRF which applies tunnel policy.
STR zxTunnelPolicyVRFNh6SelRstTeName	1.3.6.1.4.1.3902.3.6000.203.4.1.3	DisplayString	read-only	The name of the TE tunnel which the VRF selects with tunnel policy.
U32 zxTunnelPolicyVRFNh6SelRstTnlId	1.3.6.1.4.1.3902.3.6000.203.4.1.4	Unsigned32	read-only	The ID of the TE tunnel which the VRF selects with tunnel policy.
U32 zxTunnelPolicyVRFNh6SelRstBandth	1.3.6.1.4.1.3902.3.6000.203.4.1.5	Unsigned32	read-only	The bandwidth of TE that the VRF requires.
INT zxTunnelPolicyVRFNh6InsExistFlag	1.3.6.1.4.1.3902.3.6000.203.4.1.6	INTEGER	read-only	To indicate that the tunnel policy instance exists or not. notExist(1):The tunnel policy instance does not exist. exist(2) : The tunnel policy instance exists.
STR zxTunnelPolicyVRFNh6InstName	1.3.6.1.4.1.3902.3.6000.203.4.1.7	DisplayString	read-only	The name of the tunnel policy's instance which the VRF selects.
INT zxTunnelPolicyVRFNh6SelRstType	1.3.6.1.4.1.3902.3.6000.203.4.1.8	INTEGER	read-only	To indicate the tunnel policy type. auto(1): auto tunnel policy. mplsTe(2):fixed TE tunnel for tunnel policy. prefer(3):fixed TE tunnel as preference,if down, select others. teEcmp(4):fixed TE ecmp id for tunnel policy. greTunnel(5):fixed GRE tunnel for tunnel policy.
INT zxTunnelPolicyVRFNh6SelLspType	1.3.6.1.4.1.3902.3.6000.203.4.1.9	INTEGER	read-only	To indicate the lsp type of the tunnel which the tunnel policy selects for the VRF. none(1): select none. te(2):select a TE tunnel for the VRF. ldp(3):select LDP lsp for the VRF. teEcmp(4):select te ecmp for the VRF. greTunnel(5):select GRE tunnel for the VRF.
U32 zxTunnelPolicyVRFNh6SelEcmpGrpId	1.3.6.1.4.1.3902.3.6000.203.4.1.10	Unsigned32	read-only	The TE ecmp(Equal-cost multi-path) group ID that tunnel policy selects for the VRF.

RFC description

Manages tunnel policy configuration including tunnel selection, pseudowire, and VRF-based routing policy on ZTE ROS NG platforms.

Start monitoring ZTE ZXROSNG-based router (tunnel-policy selection/fallback config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXROSNG-TUNNEL-POLICY-MIB

What Is ZXROSNG-TUNNEL-POLICY-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description