All MIBs › ZXR10-MAC-MIB › macIfMaxNum
macIfMaxNum
Module: ZXR10-MAC-MIB
OID (symbolic): ZXR10-MAC-MIB::macIfMaxNum
OID (numeric): 1.3.6.1.4.1.3902.3.888.2.1.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Configuration of max MAC number on port. Command of limit-num and unknow-filter-limit-num can change this value both.
What is macIfMaxNum?
An obsolete per-port setting that used to cap the maximum number of MAC addresses learnable on a given port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.888.2.1.1.4 snmpwalk -v2c -c public <target> ZXR10-MAC-MIB::macIfMaxNum
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.888.2.1.1.4.1 snmpget -v2c -c public <target> ZXR10-MAC-MIB::macIfMaxNum.1
Start monitoring ZTE ZXR10 switch/router (MAC-address-table aging/per-interface learning config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-MAC-MIB::macIfMaxNum OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 switch/router (MAC-address-table aging/per-interface learning config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.888 | zxr10MacConfig | ZXR10-MAC-MIB |
| 1.3.6.1.4.1.3902.3.888.2 | macInterfaceConfig | ZXR10-MAC-MIB |
| 1.3.6.1.4.1.3902.3.888.2.1 | macInterfaceConfigTable | ZXR10-MAC-MIB |
| 1.3.6.1.4.1.3902.3.888.2.1.1 | macInterfaceConfigEntry | ZXR10-MAC-MIB |
| 1.3.6.1.4.1.3902.3.888.2.1.1.4 | macIfMaxNum | ZXR10-MAC-MIB |