ZHONE-SHELF-MONITOR-MIB

All MIBs › ZHONE-SHELF-MONITOR-MIB

Organization: Zhone Technologies, Inc

Last Updated: 2011-12-02

Category: Zhone Technologies CPE

Description: Monitors Zhone shelf hardware components including power supplies, fans, and environmental conditions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZHONE-SHELF-MONITOR-MIB?

This proprietary MIB from Zhone Technologies monitors hardware conditions at the equipment-shelf level within Zhone's PLS (presumably a chassis/shelf product line) access platforms. It exposes environmental and power-related objects for components housed in a shelf, including power supplies, fans, and general environmental conditions. Its monitoring value is directly focused on hardware health: power supply status, fan operational state, and environmental readings (such as temperature) let operators detect a failing power supply, a stalled fan, or an overheating shelf before it causes a service outage. It likely works alongside other Zhone card/resource MIBs that cover per-card status within the same shelf. It is deployed on Zhone PLS-based broadband access shelves/chassis in central office or cabinet environments. Engineers can download the ZHONE-SHELF-MONITOR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZHONE-SHELF-MONITOR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Zhone Technologies PLS access shelf/chassis

Monitoring Examples

An administrator would poll the shelf's power supply status objects to confirm both supplies (in a redundant configuration) are up, and check fan status objects for a stalled or failed fan. A temperature reading trending upward combined with a fan failure indication would be an early warning of an impending thermal shutdown for the shelf. No concrete sample object names were supplied for this MIB, so this scenario is based on the module description.

What Can Be Monitored

power supply status
fan operational status
shelf temperature/environmental conditions
overall shelf health

Imported Objects

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TimeStamp
TruthValue

From Zhone

zhoneModules	OBJECT-IDENTITY
zhoneShelf	OBJECT-IDENTITY
zhoneShelfIndex	OBJECT-TYPE
zhoneSlotIndex	OBJECT-TYPE

From Zhone-TC

ZhoneAdminString
ZhoneCardLineType
ZhoneCardType

OIDs

OID symbolic	OID numeric	Type	Access	Description
shelfDataTable	1.3.6.1.4.1.5504.3.2.1		not-accessible	A table of shelf information and status for each shelf in a PLS system. The table includes revision level, general shelf status, and enviromental monitoring. The maximum number of shelves in a system is 255. Shelf 0 is an invalid entry.
shelfDataEntry	1.3.6.1.4.1.5504.3.2.1.1		not-accessible	An entry per shelf in a PLS system. The entries are indexed by zhoneShelfIndex or the shelf number which has a value of 1 to 255. Shelf 0 is not valid. zhoneShelfIndex is a column in the zhoneShelfSlotTable, defined in the zhone MIB (Zhone.mib). An Entry in the table is automatically created when a new shelf is added to a PLS and detected by the operating software of the system
STR shelfMfgCLEICode	1.3.6.1.4.1.5504.3.2.1.1.1	ZhoneAdminString	read-only	CLEI (Common Language Equipment Identifier) code of the shelf assembly as stored in the EEPROM of the unit if defined otherwise the value will be set to NULL (0-length string) by the shelf monitor card. Note: CLEI codes for individual assemblies of the shelf such as monitor card or backplane assembly are not supported.
STR shelfMonitorSerialNumber	1.3.6.1.4.1.5504.3.2.1.1.2	ZhoneAdminString	read-only	The manufacturing serial number for the shelf monitor card of this shelf assembly.
STR shelfMonitorRevisionCode	1.3.6.1.4.1.5504.3.2.1.1.3	ZhoneAdminString	read-only	Manufacturing hardware revision code for the shelf monitoring card of this shelf assembly
STR shelfBkplaneSerialNumber	1.3.6.1.4.1.5504.3.2.1.1.4	ZhoneAdminString	read-only	The manufacturing serial number of the backplane in this shelf assembly.
STR shelfBkplaneRevisionCode	1.3.6.1.4.1.5504.3.2.1.1.5	ZhoneAdminString	read-only	The manufacturing hardware revision code for the back- plane in this shelf assembly.
STR shelfFanTraySerialNumber	1.3.6.1.4.1.5504.3.2.1.1.6	ZhoneAdminString	read-only	The manufacturing serial number for the fan tray assembly in this shelf assembly.
STR shelfFanTrayRevisionCode	1.3.6.1.4.1.5504.3.2.1.1.7	ZhoneAdminString	read-only	The hardware revision code for the fan tray assembly in this shelf assembly.
I32 shelfSlotCount	1.3.6.1.4.1.5504.3.2.1.1.8	Integer32	read-only	The number of slots in this shelf
OCT shelfFeatureBits	1.3.6.1.4.1.5504.3.2.1.1.9	OCTET STRING	read-only	A string of 8 octets indicating the setting of the feature BITS.
ZHO shelfFanTrayType	1.3.6.1.4.1.5504.3.2.1.1.10	ZhoneCardType	read-only	Description.
T/F shelfIOAlarmBoardPresent	1.3.6.1.4.1.5504.3.2.1.1.11	TruthValue	read-only	Indicates that MXK I/O Alarm Board hardware is present and supported. Not used in systems other than MXK.
shelfStatusTable	1.3.6.1.4.1.5504.3.2.2		not-accessible	environmental status table - this table contains the environmental monitoring data for each shelf in a PLS.
shelfStatusEntry	1.3.6.1.4.1.5504.3.2.2.1		not-accessible	This table augments the shelfDataTable. Each entry in the table contains the status of the environmental monitoring sensors on the shelf monitor card.
INT shelfAPowerStatus	1.3.6.1.4.1.5504.3.2.2.1.1	INTEGER	read-only	Status of the A power to the shelf. On systems with multiple power sources, this entry represents the AC power-supply status. On systems with line-power, this entry represents the status of power-line 1. The status of the power is indicated as follows: powerOk: the shelf is receiving a normal (in-range) voltage. powerNotOk: the shelf is not receiving voltage or the voltage is outside of the usable range. A trap is generated with the loss of A power.
INT shelfBPowerStatus	1.3.6.1.4.1.5504.3.2.2.1.2	INTEGER	read-only	Status of the B power to the shelf. On systems with multiple power sources, this entry represents the -48 Volt DC power-supply status. On systems with line-power, this entry represents the status of power-line 2. The status of the power is indicated as follows: powerOk: the shelf is receiving a normal (in-range) voltage. powerNotOk: the shelf is not receiving voltage or the voltage is outside of the usable range. A trap is generated with the loss of A power.
INT shelfTemperatureStatus	1.3.6.1.4.1.5504.3.2.2.1.3	INTEGER	read-only	Outlet or exhaust air temperature as status. A trap is generated if temperature leaves the normal opertioning range.
INT shelfFanTrayStatus	1.3.6.1.4.1.5504.3.2.2.1.4	INTEGER	read-only	The operational status of the shelf fan tray assembly as follows: Operational: the fan tray is fully operational with all fans running. notOperational: the fan tray assembly has failed. A high severity trap is generated when the status is set to notOperational.
BIT shelfAlarmContactsStatus	1.3.6.1.4.1.5504.3.2.2.1.5	Bits	read-only	A BIT field of two (2) BITs indicating larm status of the dry contact alarm on the chassis/shelf: A value of zero(0) is returned in each BIT if the contact is open A value of one(1) is returned if the contack is closed
OCT shelfCardStatus	1.3.6.1.4.1.5504.3.2.2.1.6	OCTET STRING	read-only	A string of octets, with one octet per card slot on the shelf assembly. The string of octets indicates the status of each slot in sequence with the first octet describing first slot. The encoding of each octet is as follows: 1: card is booting from eeprom 2: card is performing post tests 3: card is loading code from code loader 4: card is configuing 5: card is running 6: card is blocked from booting 7: card is dumping fatal data 8: card is in faulted 9: card is reseting 10: slot is empty 11: slot is not provisioned 12: card is disabled 13: card is powered down 14: card is powered up 15: card is uplink with active traffic 16: card is uplink without active traffic
BIT shelfLedStatus	1.3.6.1.4.1.5504.3.2.2.1.7	Bits	read-only	A BIT field of six(6) BITs indicating the status of the LEDs on the chassis bezel. A value of zero(0) is returned in each BIT if the LED is off, a value of one(1) is returned if the LED is lit.
G32 shelfAdminResets	1.3.6.1.4.1.5504.3.2.2.1.8	Gauge32	read-only	Count of the number of administration resets to a shelf such as systemreboot.
G32 shelfFaultResets	1.3.6.1.4.1.5504.3.2.2.1.9	Gauge32	read-only	Count of the number of shelf resets due to faults.
G32 shelfPowerResets	1.3.6.1.4.1.5504.3.2.2.1.10	Gauge32	read-only	Count of the number of shelf resets due to power failure or power cycle.
INT shelfCPowerStatus	1.3.6.1.4.1.5504.3.2.2.1.11	INTEGER	read-only	Status of the C power to the shelf. On systems with multiple power sources, this entry represents the line-power power-supply status. On systems with line-power, this entry represents the status of power-line 3. The status of the power is indicated as follows: powerOk: the shelf is receiving a normal (in-range) voltage. powerNotOk: the shelf is not receiving voltage or the voltage is outside of the usable range. A trap is generated with the loss of A power.
INT shelfDPowerStatus	1.3.6.1.4.1.5504.3.2.2.1.12	INTEGER	read-only	Status of the D power to the shelf. On systems with line-power, this entry represents the status of power-line 4. The status of the power is indicated as follows: powerOk: the shelf is receiving a normal (in-range) voltage. powerNotOk: the shelf is not receiving voltage or the voltage is outside of the usable range. A trap is generated with the loss of A power.
STR shelfBatteryAVoltage	1.3.6.1.4.1.5504.3.2.2.1.13	ZhoneAdminString	read-only	Battery A voltage measurement.
STR shelfBatteryBVoltage	1.3.6.1.4.1.5504.3.2.2.1.14	ZhoneAdminString	read-only	Battery B voltage measurement.
STR shelfChassisReturnVoltage	1.3.6.1.4.1.5504.3.2.2.1.15	ZhoneAdminString	read-only	Chassis return voltage.
shelfFanTable	1.3.6.1.4.1.5504.3.2.3		not-accessible	A table of information about the fans on the shelf. Currently a BAN has 8 fans and a MALC has 3 fans.
shelfFanEntry	1.3.6.1.4.1.5504.3.2.3.1		not-accessible	Description.
I32 shelfFanIndex	1.3.6.1.4.1.5504.3.2.3.1.1	Integer32	not-accessible	An index into the fan table. It is index from 1..Number of fans with no missing indicies.
I32 shelfFanSpeed	1.3.6.1.4.1.5504.3.2.3.1.2	Integer32	read-only	Fan speed of the fan in RPM
STR shelfFanLocation	1.3.6.1.4.1.5504.3.2.3.1.3	ZhoneAdminString	read-only	Description of the location of the fan in the fan tray
I32 shelfFanLowSpeedThreshold	1.3.6.1.4.1.5504.3.2.3.1.4	Integer32	read-only	The lower speed allowed for a fan before it is considered failed.
shelfTemperatureTable	1.3.6.1.4.1.5504.3.2.4		not-accessible	A table of information about the temperature sensors in the shelf.
shelfTemperatureEntry	1.3.6.1.4.1.5504.3.2.4.1		not-accessible	Description.
I32 shelfTemperatureIndex	1.3.6.1.4.1.5504.3.2.4.1.1	Integer32	not-accessible	An index into the temperature table. It is index 1..Number of temperature sensors with no missing indicies.
I32 shelfTemperature	1.3.6.1.4.1.5504.3.2.4.1.2	Integer32	read-only	The temperature of a shelf at this position.
STR shelfTemperatureLocation	1.3.6.1.4.1.5504.3.2.4.1.3	ZhoneAdminString	read-only	The location of the this temperature sensors.
I32 shelfTemperatureHighThreshold	1.3.6.1.4.1.5504.3.2.4.1.4	Integer32	read-only	The upper temperature when an alarm will be sent.
I32 shelfTemperatureLowThreshold	1.3.6.1.4.1.5504.3.2.4.1.5	Integer32	read-only	The lower temperature that an alarm will be sent.
shelfCardTable	1.3.6.1.4.1.5504.3.2.5		not-accessible	A table of card information for each shelf in a PLS system. The includes different counts of resets for each card and the card type for each slot.
shelfCardEntry	1.3.6.1.4.1.5504.3.2.5.1		not-accessible	An entry per slot and shelf in a PLS system. The entries are indexed by zhoneShelfIndex/zhoneSlotIndex.
ZHO cardType	1.3.6.1.4.1.5504.3.2.5.1.1	ZhoneCardType	read-only	The card type for the card in this slot.
ZHO cardSubType	1.3.6.1.4.1.5504.3.2.5.1.2	ZhoneCardType	read-only	The card sub type for this slot
ZHO cardLineType	1.3.6.1.4.1.5504.3.2.5.1.3	ZhoneCardLineType	read-only	The card line type for this slot. This is only valid if the slot is provisioned.
STR cardVersion	1.3.6.1.4.1.5504.3.2.5.1.4	ZhoneAdminString	read-only	The card version for the card in this slot.
STR cardEepromVersion	1.3.6.1.4.1.5504.3.2.5.1.5	ZhoneAdminString	read-only	The eeprom version for the card in this slot.
STR cardSerialNumber	1.3.6.1.4.1.5504.3.2.5.1.6	ZhoneAdminString	read-only	The serial number for the card in this slot.
STR cardCLEICode	1.3.6.1.4.1.5504.3.2.5.1.7	ZhoneAdminString	read-only	CLEI (Common Language Equipment Identifier) code of the shelf assembly as stored in the EEPROM of the unit if defined otherwise the value will be set to NULL (0-length string) by the shelf monitor card.
OCT cardFeatureBits	1.3.6.1.4.1.5504.3.2.5.1.8	OCTET STRING	read-only	A string of 8 octets indicating the setting of the feature BITS.
INT cardState	1.3.6.1.4.1.5504.3.2.5.1.9	INTEGER	read-only	The card state for the card in this slot. cardStateBooting card is booting from eeprom cardStatePost card is performing post tests cardStateLoading card is loading code from code loader cardStateConfiguring card is configuing cardStateRunning card is running cardStateResetHold card is blocked from booting cardStateDumping cardStateFault card is in faulted cardStateReset card is reseting cardNotPresent card is not present in slot cardNotProvisioned card in slot is not provisioned
G32 cardAdminResets	1.3.6.1.4.1.5504.3.2.5.1.10	Gauge32	read-only	Count of the number of administration resets to this card.
G32 cardFaultResets	1.3.6.1.4.1.5504.3.2.5.1.11	Gauge32	read-only	Count of number of fault resets to this card.
T/F cardReboot	1.3.6.1.4.1.5504.3.2.5.1.12	TruthValue	read-write	When set to true, this card will be rebooted. Error cases: (a) If the card is not present, a set results in an INCONSISTENT_VALUE error. (b) An attempt to set to false results in a WRONG_VALUE error. All gets will return a value of false. This is supported only on systems with a supervisory bus, such as BAN & MALC.
INT zhoneShelfStatus	1.3.6.1.4.1.5504.3.2.7	INTEGER	read-only	This variable is set by the ShelfMonitor when the shelf state changes.
INT zhoneCardStatus	1.3.6.1.4.1.5504.3.2.8	INTEGER	read-only	This variable is set by the ShelfMonitor whenever the card state changes.
TIM zhoneShelfStatusLastChange	1.3.6.1.4.1.5504.3.2.10	TimeStamp	read-only	The time the shelf status changed.
TIM zhoneCardStatusLastChange	1.3.6.1.4.1.5504.3.2.11	TimeStamp	read-only	The time the card status last changed.
zhoneTrapShelfMonitorV2Traps	1.3.6.1.4.1.5504.3.2.12			ShelfMonitor Trap.
zhoneTrapShelfMonitorGroup	1.3.6.1.4.1.5504.3.2.12.1			Description.
NTF zhoneTrapShelfStatusChange	1.3.6.1.4.1.5504.3.2.12.2			Shelf status reported by the ShelfMonitor.
NTF zhoneTrapCardStatusChange	1.3.6.1.4.1.5504.3.2.12.3			Card status reported by the ShelfMonitor.
NTF zhoneTrapCardVersionCheck	1.3.6.1.4.1.5504.3.2.12.4			When the cardVersion of a card is incompatible with that of active InfoServ card, this trap is generated. Currently, this is only supported on BAN platform and its card versions are described as follows: The revision number of the newer 40 Mhz cards is in the range of 'BA' to 'CV'. Older card version either does not display in this format or the revision number is not in this range. For example, for a card with cardVersion '840-29496-72-CR', the revision number is 'CR' and is a new 40 Mhz card.
NTF zhoneTrapFlashCardStatusChange	1.3.6.1.4.1.5504.3.2.12.5			This Trap reports the FlashCard status change for the InfoServ slots flash cards within BAN shelf.
NTF zhoneTrapCardToBkplaneStatusChange	1.3.6.1.4.1.5504.3.2.12.6			Mxk line card link to backplane status.
zhoneShelfStatusGroup	1.3.6.1.4.1.5504.3.2.13			These objects are used to identify the status change of the trap.
zhoneStatusLastChangeGroup	1.3.6.1.4.1.5504.3.2.14			Description.
zhoneCardStatusGroup	1.3.6.1.4.1.5504.3.2.15			Description.
INT zhoneFlashCardStatusChange	1.3.6.1.4.1.5504.3.2.16	INTEGER	accessible-for-notify	The FlashCardStatus reports the status of the flash card ports on the InfoServe cards within BAN shelf. 1 : FlashCard Port 1 is Installed 2 : FlashCard Port 1 is Removed 3 : FlashCard Port 2 is Installed 4 : FlashCard Port 2 is Removed
INT zhoneCardLinkToBkplaneStatus	1.3.6.1.4.1.5504.3.2.17	INTEGER	accessible-for-notify	Mxk linecard Link To Backplane status.
zhoneShelfMonitorModule	1.3.6.1.4.1.5504.6.7			Contains the elements that are monitored on a per shelf basis in the PLS.

RFC description

Vendor-private MIB for Zhone equipment monitoring shelf-level hardware components, power supplies, and thermal sensors.

Start monitoring Zhone Technologies PLS access shelf/chassis (per-shelf power-supply/fan/environmental status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZHONE-SHELF-MONITOR-MIB

What Is ZHONE-SHELF-MONITOR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description