| OID symbolic | OID numeric | Type | Access | Description |
| zhoneApon | 1.3.6.1.4.1.5504.5.12 | | | ATM Passive Optical Network-related Zhone MIBs. |
| zhoneAponMIB | 1.3.6.1.4.1.5504.5.12.1 | | | This is the Zhone ATM-PON mib. |
| zhoneAponOltConfigGroup | 1.3.6.1.4.1.5504.9.1.2 | | | OLT Config objects. |
| zhoneAponOltOnuConfigGroup | 1.3.6.1.4.1.5504.9.1.4 | | | Zhone ATM-PON ONU Config objects. |
| zhoneAponOltOnuStatusGroup | 1.3.6.1.4.1.5504.9.1.5 | | | Zhone ATM-PON ONU Status objects. |
| zhoneAponOltStatusGroup | 1.3.6.1.4.1.5504.9.1.3 | | | Zhone ATM-PON OLT Status objects. |
| zhoneAponOltTrafficContainerGroup | 1.3.6.1.4.1.5504.9.1.8 | | | OLT Traffic Container objects. |
| zhoneAponOnuConfigGroup | 1.3.6.1.4.1.5504.9.1.6 | | | ONU configuration information. |
| zhoneAponOnuStatusGroup | 1.3.6.1.4.1.5504.9.1.7 | | | ONU status and alarm information. |
| zhoneAponTraps | 1.3.6.1.4.1.5504.5.12.3 | | | Definitions for Atm PON traps. |
| zhoneAponTrapsGroup | 1.3.6.1.4.1.5504.9.1.9 | | | Atm PON traps group. |
| zhoneAPONV2Traps | 1.3.6.1.4.1.5504.5.12.3.0 | | | APON Olt and Onu Traps. |
| INT zhoneOltConfigAutoLearn | 1.3.6.1.4.1.5504.5.12.1.2.1.1 | INTEGER | read-write | Auto-learn enable flag. |
| INT zhoneOltConfigBip8 | 1.3.6.1.4.1.5504.5.12.1.2.1.3 | INTEGER | read-write | Bip8 - Bit Interleave Parity, a procedure whereby each bit of a
resulting BIP8 parity byte is a parity bit done across a specific
bit position. |
| T/F zhoneOltConfigCdrActiveHigh | 1.3.6.1.4.1.5504.5.12.1.2.1.12 | TruthValue | read-write | Clock Data Recovery. |
| I32 zhoneOltConfigCdrLocation | 1.3.6.1.4.1.5504.5.12.1.2.1.11 | Integer32 | read-write | Re-sync signal location. |
| I32 zhoneOltConfigCdrPattern | 1.3.6.1.4.1.5504.5.12.1.2.1.10 | Integer32 | read-write | Re-sync signal pattern. |
| INT zhoneOltConfigCellScrambling | 1.3.6.1.4.1.5504.5.12.1.2.1.2 | INTEGER | read-write | Cell scrambling option control flag. |
| I32 zhoneOltConfigCpeLimit | 1.3.6.1.4.1.5504.5.12.1.2.1.13 | Integer32 | read-write | Cell phase error limit. |
| T/F zhoneOltConfigCrcRx | 1.3.6.1.4.1.5504.5.12.1.2.1.6 | TruthValue | read-write | Cyclic Redundancy Check for reception. |
| I32 zhoneOltConfigDelimiterPattern | 1.3.6.1.4.1.5504.5.12.1.2.1.8 | Integer32 | read-write | A unique pattern indicating the start of the
ATM cell or minislot, which can be used to
perform byte synchronization. |
| I32 zhoneOltConfigDelimiterSize | 1.3.6.1.4.1.5504.5.12.1.2.1.9 | Integer32 | read-write | Delimiter pattern size. |
| zhoneOltConfigEntry | 1.3.6.1.4.1.5504.5.12.1.2.1 | | not-accessible | An entry in the Olt Config table. |
| INT zhoneOltConfigHec | 1.3.6.1.4.1.5504.5.12.1.2.1.4 | INTEGER | read-write | Headder Error Control field. |
| T/F zhoneOltConfigHecRxBypass | 1.3.6.1.4.1.5504.5.12.1.2.1.5 | TruthValue | read-write | Cyclic Redundancy Check bypass for reception. |
| I32 zhoneOltConfigLcdAlpha | 1.3.6.1.4.1.5504.5.12.1.2.1.15 | Integer32 | read-write | Number of cells in delineation error before the LCD alarm is raised. |
| I32 zhoneOltConfigLcdDelta | 1.3.6.1.4.1.5504.5.12.1.2.1.16 | Integer32 | read-write | Number of cells received NOT in delineation error required to
clear LCD Alarm. |
| I32 zhoneOltConfigLcdLimit | 1.3.6.1.4.1.5504.5.12.1.2.1.14 | Integer32 | read-write | Loss of cell delineation limit. |
| INT zhoneOltConfigLineStatusChangeTrapEnable | 1.3.6.1.4.1.5504.5.12.1.2.1.23 | INTEGER | read-write | Enable/disable control for line status traps on this interface. |
| INT zhoneOltConfigLoopback | 1.3.6.1.4.1.5504.5.12.1.2.1.21 | INTEGER | read-write | OLT loopback configuration. |
| I32 zhoneOltConfigMaxPonDistance | 1.3.6.1.4.1.5504.5.12.1.2.1.22 | Integer32 | read-write | Max PON distance. |
| INT zhoneOltConfigOverheadSize | 1.3.6.1.4.1.5504.5.12.1.2.1.7 | INTEGER | read-write | Overhead size definition field. |
| I32 zhoneOltConfigSyncBytesClkDivisor | 1.3.6.1.4.1.5504.5.12.1.2.1.19 | Integer32 | read-write | Sync Bytes Clock Divisor. |
| zhoneOltConfigTable | 1.3.6.1.4.1.5504.5.12.1.2 | | not-accessible | Optical Line Termination configuration table. |
| T/F zhoneOltConfigTxDiscardNonMatchingVpi | 1.3.6.1.4.1.5504.5.12.1.2.1.17 | TruthValue | read-write | Discard non-matching Vpi. |
| INT zhoneOltConfigTxSyncBytes | 1.3.6.1.4.1.5504.5.12.1.2.1.20 | INTEGER | read-write | Enable transmission of sync bytes for ONUs to get their
clock from a network source. |
| T/F zhoneOltConfigUtopiaDiscard | 1.3.6.1.4.1.5504.5.12.1.2.1.18 | TruthValue | read-write | Discard Utopia cells with HEC errors or arriving on unknown Vpi. |
| NTF zhoneOltLineStatusChangeTrap | 1.3.6.1.4.1.5504.5.12.3.0.1 | | | Line status change trap for the OLT APON interface. |
| INT zhoneOltOnuConfigChurnkey | 1.3.6.1.4.1.5504.5.12.1.4.1.3 | INTEGER | read-write | Churn key enable flag. |
| zhoneOltOnuConfigEntry | 1.3.6.1.4.1.5504.5.12.1.4.1 | | not-accessible | An entry in the ONU Config table. |
| INT zhoneOltOnuConfigLineStatusChangeTrapEnable | 1.3.6.1.4.1.5504.5.12.1.4.1.4 | INTEGER | read-write | Enable/disable control for line status traps on this interface. |
| STR zhoneOltOnuConfigPassword | 1.3.6.1.4.1.5504.5.12.1.4.1.1 | ZhoneAdminString | read-write | ONU remote-device password. |
| I32 zhoneOltOnuConfigSerialNum | 1.3.6.1.4.1.5504.5.12.1.4.1.2 | Integer32 | read-write | ONU remote-device serial number. |
| zhoneOltOnuConfigTable | 1.3.6.1.4.1.5504.5.12.1.4 | | not-accessible | Optical Network Unit configuration table - MALC side. |
| zhoneOltOnuStatusEntry | 1.3.6.1.4.1.5504.5.12.1.5.1 | | not-accessible | An entry in the OLT/ONU Status table. |
| T/F zhoneOltOnuStatusPonAlarmERR | 1.3.6.1.4.1.5504.5.12.1.5.1.2 | TruthValue | read-only | Bip8 error - ONU. |
| T/F zhoneOltOnuStatusPonAlarmLCD | 1.3.6.1.4.1.5504.5.12.1.5.1.11 | TruthValue | read-only | Description. |
| T/F zhoneOltOnuStatusPonAlarmLOA | 1.3.6.1.4.1.5504.5.12.1.5.1.1 | TruthValue | read-only | Loss of ACK - ONU. |
| T/F zhoneOltOnuStatusPonAlarmLOS | 1.3.6.1.4.1.5504.5.12.1.5.1.7 | TruthValue | read-only | Description. |
| T/F zhoneOltOnuStatusPonAlarmMEM | 1.3.6.1.4.1.5504.5.12.1.5.1.5 | TruthValue | read-only | Message Error Message. |
| T/F zhoneOltOnuStatusPonAlarmOAML | 1.3.6.1.4.1.5504.5.12.1.5.1.10 | TruthValue | read-only | Description. |
| T/F zhoneOltOnuStatusPonAlarmPEE | 1.3.6.1.4.1.5504.5.12.1.5.1.8 | TruthValue | read-only | Description. |
| T/F zhoneOltOnuStatusPonAlarmREI | 1.3.6.1.4.1.5504.5.12.1.5.1.4 | TruthValue | read-only | Remote Error Indication. |
| T/F zhoneOltOnuStatusPonAlarmRXINH | 1.3.6.1.4.1.5504.5.12.1.5.1.6 | TruthValue | read-only | Rx alarm inhibit. |
| T/F zhoneOltOnuStatusPonAlarmSD | 1.3.6.1.4.1.5504.5.12.1.5.1.3 | TruthValue | read-only | Signal Degraded alarm. |
| T/F zhoneOltOnuStatusPonAlarmSUF | 1.3.6.1.4.1.5504.5.12.1.5.1.9 | TruthValue | read-only | Description. |
| zhoneOltOnuStatusTable | 1.3.6.1.4.1.5504.5.12.1.5 | | not-accessible | Optical Network Unit status table - MALC side. |
| zhoneOltStatusEntry | 1.3.6.1.4.1.5504.5.12.1.3.1 | | not-accessible | An entry in the OLT Status table. |
| TIM zhoneOltStatusLastChange | 1.3.6.1.4.1.5504.5.12.1.3.1.11 | TimeStamp | read-only | Time of last line status change. |
| INT zhoneOltStatusLoopback | 1.3.6.1.4.1.5504.5.12.1.3.1.2 | INTEGER | read-only | Loopback state of the OLT. |
| T/F zhoneOltStatusPonAlarmCPE | 1.3.6.1.4.1.5504.5.12.1.3.1.10 | TruthValue | read-only | Cell Phase Error. |
| T/F zhoneOltStatusPonAlarmLCD | 1.3.6.1.4.1.5504.5.12.1.3.1.7 | TruthValue | read-only | Loss of Cell Delineation. |
| T/F zhoneOltStatusPonAlarmLOS | 1.3.6.1.4.1.5504.5.12.1.3.1.8 | TruthValue | read-only | Loss of Signal alarm. |
| T/F zhoneOltStatusPonAlarmLPHY | 1.3.6.1.4.1.5504.5.12.1.3.1.3 | TruthValue | read-only | Loss of physical layer alarm. |
| T/F zhoneOltStatusPonAlarmOAML | 1.3.6.1.4.1.5504.5.12.1.3.1.9 | TruthValue | read-only | PLOAM cell loss. |
| T/F zhoneOltStatusPonAlarmPEE | 1.3.6.1.4.1.5504.5.12.1.3.1.6 | TruthValue | read-only | Physical Equipment Error (received from an ONU.) |
| T/F zhoneOltStatusPonAlarmSUF | 1.3.6.1.4.1.5504.5.12.1.3.1.5 | TruthValue | read-only | StartUp Failure - ranging process failed N times.
Note that SUF reflects a hardware problem, and does
not include cases where the ONU serial number/password
are wrong/unknown. |
| T/F zhoneOltStatusPonAlarmTF | 1.3.6.1.4.1.5504.5.12.1.3.1.4 | TruthValue | read-only | Transmitter failure notification. |
| INT zhoneOltStatusState | 1.3.6.1.4.1.5504.5.12.1.3.1.1 | INTEGER | read-only | Line state of the OLT. |
| zhoneOltStatusTable | 1.3.6.1.4.1.5504.5.12.1.3 | | not-accessible | Optical Line Termination status table. |
| T/F zhoneOltTrafficContainerCBR | 1.3.6.1.4.1.5504.5.12.1.9.1.4 | TruthValue | read-create | Constant Bit Rate - describes the nature of the traffic
on the channel. A TRUE setting implies that the data
stream will be of a constant nature. FALSE implies that
the traffic will be bursty. |
| T/F zhoneOltTrafficContainerCbrCompensate | 1.3.6.1.4.1.5504.5.12.1.9.1.5 | TruthValue | read-create | A flag for ranging compensation. When a ranging window
is opened, the Grant Handler appends to the end of the
ranging window all the grants missed due to the ranging
window by CBR flows with the compensation flag set. |
| zhoneOltTrafficContainerEntry | 1.3.6.1.4.1.5504.5.12.1.9.1 | | not-accessible | Description. |
| U32 zhoneOltTrafficContainerGuaranteedBW | 1.3.6.1.4.1.5504.5.12.1.9.1.2 | Unsigned32 | read-create | The maximum guareented bandwidth is downstream bit rate
divided by number of ONUs. For this incarnation, it is
622 / 32 = 19.4 |
| I32 zhoneOltTrafficContainerIndex | 1.3.6.1.4.1.5504.5.12.1.9.1.1 | Integer32 | not-accessible | A unique value to identify this traffic container entry. |
| I32 zhoneOltTrafficContainerIndexNext | 1.3.6.1.4.1.5504.5.12.1.8 | Integer32 | read-only | This object contains an appropriate value to be used for
the zhoneOltTrafficContainerIndex when creating entries
in the zhoneOltTrafficContainerTable. The value 0 indicates
that no unassigned entries are available. To obtain the
zhoneOltTrafficContainerIndex value for a new entry, the
manager issues a management protocol retrieval operation to
obtain the current value of this object. After each
retrieval, the agent should modify the value to the next
unassigned index.
After a manager retrieves a value the agent will determine
through its local policy when this index value will be made
available for reuse. |
| U32 zhoneOltTrafficContainerMaximumBW | 1.3.6.1.4.1.5504.5.12.1.9.1.3 | Unsigned32 | read-create | Maximum bandwidth for a PON channel. The maximum
bandwidth is downstream bit rate divided by the
number of ONUs. For this incarnation, it is
622 / 32 = 19.4 |
| ZHO zhoneOltTrafficContainerRowStatus | 1.3.6.1.4.1.5504.5.12.1.9.1.6 | ZhoneRowStatus | read-create | Row status of the traffic container entry. This field
must be initially set to 'createAndGo'. |
| zhoneOltTrafficContainerTable | 1.3.6.1.4.1.5504.5.12.1.9 | | not-accessible | Traffic Container definitions for the OLT. |
| zhoneOnuConfigEntry | 1.3.6.1.4.1.5504.5.12.1.6.1 | | not-accessible | An entry in the ONU Config table. |
| INT zhoneOnuConfigHEC | 1.3.6.1.4.1.5504.5.12.1.6.1.4 | INTEGER | read-write | Header Error Control. |
| INT zhoneOnuConfigLoopback | 1.3.6.1.4.1.5504.5.12.1.6.1.5 | INTEGER | read-write | Loopback mode for device. |
| T/F zhoneOnuConfigNetworkRefClk | 1.3.6.1.4.1.5504.5.12.1.6.1.3 | TruthValue | read-write | Network reference clock usage flag. |
| INT zhoneOnuConfigOverheadSize | 1.3.6.1.4.1.5504.5.12.1.6.1.6 | INTEGER | read-write | Overhead size definition field. |
| STR zhoneOnuConfigPassword | 1.3.6.1.4.1.5504.5.12.1.6.1.2 | ZhoneAdminString | read-write | ONU password. |
| INT zhoneOnuConfigRfVideo | 1.3.6.1.4.1.5504.5.12.1.6.1.7 | INTEGER | read-write | Used to turn rf video on and off and to read current
status of rf video. |
| I32 zhoneOnuConfigSerialNumber | 1.3.6.1.4.1.5504.5.12.1.6.1.1 | Integer32 | read-only | ONU serial number. |
| zhoneOnuConfigTable | 1.3.6.1.4.1.5504.5.12.1.6 | | not-accessible | Configuration information for the far-end (ONU) device. |
| NTF zhoneOnuLineStatusChangeTrap | 1.3.6.1.4.1.5504.5.12.3.0.2 | | | Line status change trap for a particular Onu APON interface. |
| T/F zhoneOnuStatusAlarmDACT | 1.3.6.1.4.1.5504.5.12.1.7.1.13 | TruthValue | read-only | De-activate PON-ID - It instructs the ONU to deactivate itself. |
| T/F zhoneOnuStatusAlarmDIS | 1.3.6.1.4.1.5504.5.12.1.7.1.14 | TruthValue | read-only | Disabled ONU - When the ONU receives a Disable_serial_number
message with it's own serial number and the enable flag=0xFF.
It stays in this state even after power off. |
| T/F zhoneOnuStatusAlarmERR | 1.3.6.1.4.1.5504.5.12.1.7.1.10 | TruthValue | read-only | Block Error Detection - The downstream received BIP8 is
compared with the calculated BIP8 on the received stream.
The number of differing bits is accumulated in ERR. At
regular intervals, the content is sent via REI to the OLT.
This interval is programmed by the OLT with a
BER_interval_timer message.
ERR is renewed at every reception of a downstream PLOAM cell. |
| T/F zhoneOnuStatusAlarmFRML | 1.3.6.1.4.1.5504.5.12.1.7.1.9 | TruthValue | read-only | Loss Of Downstream Frame - When the frame bit is 0
for three consecutive frames. |
| T/F zhoneOnuStatusAlarmLCD | 1.3.6.1.4.1.5504.5.12.1.7.1.8 | TruthValue | read-only | Loss of Cell Delineation - When seven consecutive ATM
cells have an invalid HEC. |
| T/F zhoneOnuStatusAlarmLOS | 1.3.6.1.4.1.5504.5.12.1.7.1.4 | TruthValue | read-only | Loss Of Signal - No valid optical signal. E.g. this can be
generated by the logical function (OAML.AND.FRML.AND.LCD). |
| T/F zhoneOnuStatusAlarmMEM | 1.3.6.1.4.1.5504.5.12.1.7.1.12 | TruthValue | read-only | Message Error Message - When the ONU receives an unknown message. |
| T/F zhoneOnuStatusAlarmMIS | 1.3.6.1.4.1.5504.5.12.1.7.1.15 | TruthValue | read-only | Link Mismatching - The ONU detects that the received PST and
transmitted PST are different. |
| T/F zhoneOnuStatusAlarmOAML | 1.3.6.1.4.1.5504.5.12.1.7.1.7 | TruthValue | read-only | PLOAM Cell Loss - When three consecutive PLOAM headers are wrong. |
| T/F zhoneOnuStatusAlarmPEE | 1.3.6.1.4.1.5504.5.12.1.7.1.5 | TruthValue | read-only | Physical Equipment Error - When the ONU receives a PEE message. |
| T/F zhoneOnuStatusAlarmSD | 1.3.6.1.4.1.5504.5.12.1.7.1.11 | TruthValue | read-only | Signal Degraded - Set active when the downstream BER >= 10E-5 |
| T/F zhoneOnuStatusAlarmSUF | 1.3.6.1.4.1.5504.5.12.1.7.1.6 | TruthValue | read-only | Startup Failure - The ranging of this ONU has failed (see ranging
protocol for exact condition). |
| T/F zhoneOnuStatusAlarmTF | 1.3.6.1.4.1.5504.5.12.1.7.1.3 | TruthValue | read-only | Transmitter Failure - The ONU transmitter is declared in failure
when there is no nominal backfacet photocurrent or when the drive
currents go beyond the maximum specification. |
| zhoneOnuStatusEntry | 1.3.6.1.4.1.5504.5.12.1.7.1 | | not-accessible | An entry in the ONU Status table. |
| TIM zhoneOnuStatusLastChange | 1.3.6.1.4.1.5504.5.12.1.7.1.16 | TimeStamp | read-only | Time of last line status change. |
| INT zhoneOnuStatusLoopback | 1.3.6.1.4.1.5504.5.12.1.7.1.2 | INTEGER | read-only | Loopback status. |
| INT zhoneOnuStatusOperStatus | 1.3.6.1.4.1.5504.5.12.1.7.1.1 | INTEGER | read-only | Operational status. |
| zhoneOnuStatusTable | 1.3.6.1.4.1.5504.5.12.1.7 | | not-accessible | Status and alarm information for the far-end (ONU) device. |