ZHONE-SFF

All MIBs › ZHONE-SFF

Organization: Zhone Technologies, Inc.

Last Updated: 2014-04-07

Category: Zhone Technologies CPE

Description: Defines management objects for Zhone Small Form Factor transceiver modules including optical parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZHONE-SFF?

ZHONE-SFF is Zhone Technologies' management MIB for small-form-factor pluggable optical transceiver modules -- SFP, SFF, and XFP -- installed in Zhone access/aggregation equipment. It exposes per-module inventory and optical-parameter data: transceiver type/vendor identification and real-time optical measurements such as transmit/receive optical power, temperature, and voltage/bias current for each installed module. Its monitoring value is squarely in optical hardware health: tracking a transceiver's temperature and optical power lets an operator catch a degrading laser, a dirty/damaged fiber connection, or a module nearing end-of-life before the link actually fails. It parallels the industry-standard SFF/SFP digital diagnostic monitoring (DDM) interface defined by the SFF committee specifications, though implemented as a Zhone-specific MIB rather than importing a standard MIB module. It is deployed on Zhone access/aggregation platforms that use pluggable optics, monitored by operators managing fiber-based uplinks or PON/optical access links. Engineers can download the ZHONE-SFF file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZHONE-SFF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Zhone access/aggregation equipment (pluggable optical modules)

Monitoring Examples

No sample object names were provided for this module; based on the description, an admin would poll a given transceiver's optical transmit/receive power and temperature objects to check whether an installed SFP/SFF/XFP module is operating within safe optical margins, watching for a power reading trending toward the module's low-power alarm threshold as an early sign of fiber or laser degradation.

What Can Be Monitored

transceiver type/vendor identification
optical transmit power
optical receive power
module temperature
bias current/voltage

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TruthValue

From Zhone

zhoneModules	OBJECT-IDENTITY
zhoneSFF	OBJECT-IDENTITY

From Zhone-TC

ZhoneAdminString

OIDs

OID symbolic	OID numeric	Type	Access	Description
zhoneSFFObjects	1.3.6.1.4.1.5504.3.12.1			Zhone small form factor devices
zhoneSFPTable	1.3.6.1.4.1.5504.3.12.1.1		not-accessible	Small form pluggable table
zhoneSFPEntry	1.3.6.1.4.1.5504.3.12.1.1.1		not-accessible	Row in SFP table.
STR zhoneSFPVendorName	1.3.6.1.4.1.5504.3.12.1.1.1.1	ZhoneAdminString	read-only	SFP transceiver vendor name (ASCII)
STR zhoneSFPVendorOUI	1.3.6.1.4.1.5504.3.12.1.1.1.2	ZhoneAdminString	read-only	SFP transceiver vendor IEEE company ID
STR zhoneSFPVendorPartNumber	1.3.6.1.4.1.5504.3.12.1.1.1.3	ZhoneAdminString	read-only	Part number provided by SFP transceiver vendor (ASCII)
STR zhoneSFPVendorRevisionLevel	1.3.6.1.4.1.5504.3.12.1.1.1.4	ZhoneAdminString	read-only	Revision level for part number provided by vendor (ASCII)
STR zhoneSFPSerialNumber	1.3.6.1.4.1.5504.3.12.1.1.1.5	ZhoneAdminString	read-only	Serial number provided by vendor (ASCII)
STR zhoneSFPManufacturingDateCode	1.3.6.1.4.1.5504.3.12.1.1.1.6	ZhoneAdminString	read-only	YYMMDD ASCII
BIT zhoneSFPGigeComplianceCode	1.3.6.1.4.1.5504.3.12.1.1.1.7	Bits	read-only	gigabit ethernet compliance codes
INT zhoneSFPConnectorType	1.3.6.1.4.1.5504.3.12.1.1.1.8	INTEGER	read-only	code for connector type.
INT zhoneSFPIdTransceiverType	1.3.6.1.4.1.5504.3.12.1.1.1.9	INTEGER	read-only	Code for electronic compatibility or optical compatibility.
U32 zhoneSFPExtendedIdentifier	1.3.6.1.4.1.5504.3.12.1.1.1.10	Unsigned32	read-only	Extended ID fields
INT zhoneSFPSerialEncodingAlgorithm	1.3.6.1.4.1.5504.3.12.1.1.1.11	INTEGER	read-only	Code for serial encoding algorithm
BIT zhoneSFPFiberChannelLinkLength	1.3.6.1.4.1.5504.3.12.1.1.1.12	Bits	read-only	Code for fiber channel link length.
BIT zhoneSFPFiberChannelTransmitterTechnology	1.3.6.1.4.1.5504.3.12.1.1.1.13	Bits	read-only	Fiber channel transmitter technology
BIT zhoneSFPFiberChannelTransmissionMedia	1.3.6.1.4.1.5504.3.12.1.1.1.14	Bits	read-only	Fiber channel transmission media
BIT zhoneSFPFiberChannelSpeed	1.3.6.1.4.1.5504.3.12.1.1.1.15	Bits	read-only	Fiber channel speed
U32 zhoneSFP9To125mmFiberLinkLengthKm	1.3.6.1.4.1.5504.3.12.1.1.1.16	Unsigned32	read-only	Link length supported for 9/125 mm fiber, units of km
U32 zhoneSFP9To125mmFiberLinkLength100m	1.3.6.1.4.1.5504.3.12.1.1.1.17	Unsigned32	read-only	Link length supported for 9/125 mm fiber, units of 100 m
U32 zhoneSFP50To125mmFiberLinkLength10m	1.3.6.1.4.1.5504.3.12.1.1.1.18	Unsigned32	read-only	Link length supported for 50/125 mm fiber, units of 10 m
U32 zhoneSFP62Dot5To125FiberLinkLength10m	1.3.6.1.4.1.5504.3.12.1.1.1.19	Unsigned32	read-only	Link length supported for 62.5/125 mm fiber, units of 10 m
U32 zhoneSFPNominalBitRate	1.3.6.1.4.1.5504.3.12.1.1.1.20	Unsigned32	read-only	Nominal bit rate, units of 100 MBits/sec
U32 zhoneSFPUpperBitRateMarginPercentage	1.3.6.1.4.1.5504.3.12.1.1.1.21	Unsigned32	read-only	Upper bit rate margin, units of %
U32 zhoneSFPLowerBitRatePercentage	1.3.6.1.4.1.5504.3.12.1.1.1.22	Unsigned32	read-only	Lower bit rate margin, units of %
U32 zhoneSFPCopperLinkLength	1.3.6.1.4.1.5504.3.12.1.1.1.23	Unsigned32	read-only	Link length supported for copper, units of meters
T/F zhoneSFPIsPresent	1.3.6.1.4.1.5504.3.12.1.1.1.24	TruthValue	read-only	TRUE if SFP transceiver is present, otherwise other values in this entry are not meaningful.
zhoneXFPTable	1.3.6.1.4.1.5504.3.12.1.2		not-accessible	10 Gigabit small form factor pluggable table.
zhoneXFPEntry	1.3.6.1.4.1.5504.3.12.1.2.1		not-accessible	Row in zhoneXFP table.
STR zhoneXFPVendorName	1.3.6.1.4.1.5504.3.12.1.2.1.1	ZhoneAdminString	read-only	SFP transceiver vendor name (ASCII)
STR zhoneXFPVendorOUI	1.3.6.1.4.1.5504.3.12.1.2.1.2	ZhoneAdminString	read-only	SFP transceiver vendor IEEE company ID
STR zhoneXFPManufacturingDateCode	1.3.6.1.4.1.5504.3.12.1.2.1.3	ZhoneAdminString	read-only	YYMMDD ASCII
BIT zhoneXFPComplianceCode10GbEthernet	1.3.6.1.4.1.5504.3.12.1.2.1.4	Bits	read-only	Compliance code for 10 gigabit ethernet
BIT zhoneXFPComplianceCode10GbFiber	1.3.6.1.4.1.5504.3.12.1.2.1.5	Bits	read-only	Compliance code for 10 gigabit fiber
BIT zhoneXFPLowerSpeed	1.3.6.1.4.1.5504.3.12.1.2.1.6	Bits	read-only	Description.
INT zhoneXFPConnectorType	1.3.6.1.4.1.5504.3.12.1.2.1.7	INTEGER	read-only	Description.
INT zhoneXFPIdTransceiverType	1.3.6.1.4.1.5504.3.12.1.2.1.8	INTEGER	read-only	Description.
U32 zhoneXFPExtendedIdentifier	1.3.6.1.4.1.5504.3.12.1.2.1.9	Unsigned32	read-only	Description.
BIT zhoneXFPEncodingSupport	1.3.6.1.4.1.5504.3.12.1.2.1.10	Bits	read-only	Description.
U32 zhoneXFPDeviceTechnology	1.3.6.1.4.1.5504.3.12.1.2.1.11	Unsigned32	read-only	Description.
U32 zhoneXFPSMFiberLinkLength1Km	1.3.6.1.4.1.5504.3.12.1.2.1.12	Unsigned32	read-only	Description.
U32 zhoneXFPMMExtendedFiberLinkLength	1.3.6.1.4.1.5504.3.12.1.2.1.13	Unsigned32	read-only	Description.
U32 zhoneXFPMM50umFiberLinkLength1m	1.3.6.1.4.1.5504.3.12.1.2.1.14	Unsigned32	read-only	Description.
U32 zhoneXFPMM62Dot5umFiberLinkLength1m	1.3.6.1.4.1.5504.3.12.1.2.1.15	Unsigned32	read-only	Description.
U32 zhoneXFPMinimumBitRate	1.3.6.1.4.1.5504.3.12.1.2.1.16	Unsigned32	read-only	Description.
U32 zhoneXFPMaximumBitRate	1.3.6.1.4.1.5504.3.12.1.2.1.17	Unsigned32	read-only	Description.
BIT zhoneXFPEnhancedOptions	1.3.6.1.4.1.5504.3.12.1.2.1.18	Bits	read-only	Description.
STR zhoneXFPVendorPartNumber	1.3.6.1.4.1.5504.3.12.1.2.1.19	ZhoneAdminString	read-only	Description.
STR zhoneXFPVendorRevisionLevel	1.3.6.1.4.1.5504.3.12.1.2.1.20	ZhoneAdminString	read-only	Description.
STR zhoneXFPSerialNumber	1.3.6.1.4.1.5504.3.12.1.2.1.21	ZhoneAdminString	read-only	Description.
T/F zhoneXFPIsPresent	1.3.6.1.4.1.5504.3.12.1.2.1.22	TruthValue	read-only	TRUE if XFP transceiver is present. Otherwise, the values in this row are not meaningful.
zhoneDDMStatusTable	1.3.6.1.4.1.5504.3.12.1.3		not-accessible	Digital diagnostic monitoring status from the SFPs.
zhoneDDMStatusEntry	1.3.6.1.4.1.5504.3.12.1.3.1		not-accessible	A row in the DDM table
I32 zhoneDDMTemperature	1.3.6.1.4.1.5504.3.12.1.3.1.1	Integer32	read-only	Internally measured transceiver temperature.
U32 zhoneDDMVoltage	1.3.6.1.4.1.5504.3.12.1.3.1.2	Unsigned32	read-only	Internally measured tranceiver supply voltage.
I32 zhoneDDMTxBiasCurrent	1.3.6.1.4.1.5504.3.12.1.3.1.3	Integer32	read-only	Measured Tx Bias current.
I32 zhoneDDMTxPower	1.3.6.1.4.1.5504.3.12.1.3.1.4	Integer32	read-only	Measured Tx output power.
I32 zhoneDDMRxPower	1.3.6.1.4.1.5504.3.12.1.3.1.5	Integer32	read-only	Measured received power.
INT zhoneDDMStatusWord	1.3.6.1.4.1.5504.3.12.1.3.1.6	INTEGER	read-only	Indicates current status of line with respect to DDM.
BIT zhoneDDMAlarms	1.3.6.1.4.1.5504.3.12.1.3.1.7	Bits	read-only	Bitmap of alarm conditions present, as reported by the SFP.
zhoneSFFModule	1.3.6.1.4.1.5504.6.114			Zhone MIB support for SFF module (SFP, SFF and XFP).

RFC description

Vendor-private MIB for Zhone Technologies SFF (Small Form Factor) optics module management.

Start monitoring Zhone access/aggregation equipment, pluggable optical modules (SFP/SFF/XFP optical-power/temperature/voltage status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZHONE-SFF

What Is ZHONE-SFF?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description