| OID symbolic | OID numeric | Type | Access | Description |
|---|
| zhoneIsdnTrap | 1.3.6.1.4.1.5504.3.8.3 | | | Trap for zedge to be sent to ZMS for far end code violation. |
| isdnMibV2Traps | 1.3.6.1.4.1.5504.3.8.3.1 | | | This object identity adds a zero(0) for the next to last
sub-identifier which should be used for new SNMPv2 Traps. |
| NTF isdnTrapFrameSynchLoss | 1.3.6.1.4.1.5504.3.8.3.1.1 | | | When the driver receives three successive out of synch frames
then it will set the frame synch loss bit to true and then the
application will send a trap to the NMS. After this when the driver
detects 5 good frames then it will set the frame synch lossbit to false. |
| NTF isdnTrapFECV | 1.3.6.1.4.1.5504.3.8.3.1.2 | | | Far end code violation Trap |
| NTF isdnTrapAmiViolations | 1.3.6.1.4.1.5504.3.8.3.1.3 | | | Bad Ami violation Trap. If number of ami violation crosses
the isdnThresholdAmiViolations then the application will send this to NMS. |
| NTF isdnTrapUnbalancedFrame | 1.3.6.1.4.1.5504.3.8.3.1.4 | | | This trap will be sent to NMS after the isdnThresholdUnbalancedFrame
value is crossed. |
| zhoneIsdn | 1.3.6.1.4.1.5504.5.7 | | | ISDN BRI S/T Interface MIB module.
This MIB manages the ISDN BRI S/T
Interface on Zedge . |
| zhoneIsdnMib | 1.3.6.1.4.1.5504.5.7.1 | | | |
| isdnConfigTable | 1.3.6.1.4.1.5504.5.7.1.1 | | not-accessible | The ISDN BRI integrated S/T Interface Configuration Table.
This table is indexed by IfIndex.It is created by aplication when the system comes up
with default values. |
| isdnConfigEntry | 1.3.6.1.4.1.5504.5.7.1.1.1 | | not-accessible | An entry in the ISDN config table for each S/T Interface. |
| INT isdnLineTermClass | 1.3.6.1.4.1.5504.5.7.1.1.1.1 | INTEGER | read-write | NT Terminal Mode.clas1 and class2 operations are as per CCITT I.430,
ETSI ETS 300012, and ANSI T1.605 .These specification mandate two classes
of operation for a TE with respect to D channel operation
class1 : class1 is the higher class , used for signalling information
class2 : This is the lower class.
The default value is class1. |
| INT isdnActivationTimer2 | 1.3.6.1.4.1.5504.5.7.1.1.1.2 | INTEGER | read-write | Value of Activation Timer #2.
t2-50ms(1): select 50ms for timer #2
t2-100ms(2): select 1000ms for timer #2
The default value is t2-50ms |
| INT isdnLineLoopBack | 1.3.6.1.4.1.5504.5.7.1.1.1.3 | INTEGER | read-write | loop-back-none(1) :no loop back .
loop-back-b1-st-tr(2): transparaent loopback on the S/T interface towards the user(B1 chanel).
loop-back-b1-st-nt(3): non-transparent loopback onthe S/T interface towards the user(B1 chanel)..
loop-back-b2-st-tr(4) :transparaent loopback on the S/T interface towards the user(B2 chanel).
loop-back-b2-st-nt(5):non-transparent loopback on the S/T interface towards the user(B2 channel)
loop-back-b1-idl2-tr(6):transparaent loopback on the IDL2 interface towards the system(B1 channel)
loop-back-b1-idl2-nt(7):non-transparent loopback on the IDL2 interface towards the system(B1 channel)
loop-back-b2-idl2-tr(8):transparaent loopback on the IDL2 interface towards the system(B2 channel)
loop-back-b2-idl2-nt(9): non-transparent loopback on the IDL2 interface towards the system(B2 channel)
loop-back-2bd-idl2-tr(10): transparent loopback on the IDL2 towards the system(2B + D channel)
loop-back-2bd-idl2-nt(11): non-transparent loopback on the IDL2 towards the system(2B + D channel)
loop-back-2bd-u-interface-tr (12): transparent loopback on the U interface towards the user(2B + D channel)
loop-back-2bd-u-interface-nt (13): non-transparent loopback on the U interface(2B + D channel)
loop-back-2bd-external-analog(14): loopback on the external analog interface towards the user(2B + D channel)
st is loopback on the S/T interface towards the user.
idl2 is loopback on the IDL2 interface towards the system.
tr is transparent loopback.
nt is non-transparent loopback.
The default value is loop-back-none. |
| INT isdnLinePower | 1.3.6.1.4.1.5504.5.7.1.1.1.4 | INTEGER | read-write | State of the line power.
off - no power on line.
sealing - minimum current on line to preclude corrosion.
powering - full current on line. |
| isdnPerfDataCurrentTable | 1.3.6.1.4.1.5504.5.7.1.2 | | not-accessible | The ISDN BRI S/T interface performance table which contains
the performance data for curent 15 minutes.
It contains information about the status of the ISDN S/T interface,
including the error statistics. |
| isdnPerfDataCurrentEntry | 1.3.6.1.4.1.5504.5.7.1.2.1 | | not-accessible | An entry in current performance table for each ISDN BRI
S/T interface for last 15 minutes. |
| PER isdnPerfCurBadAmiViolation | 1.3.6.1.4.1.5504.5.7.1.2.1.1 | PerfCurrentCount | read-only | Current count of frames with incorrect number of AMI violations. |
| PER isdnPerfCurUnbalancedFrame | 1.3.6.1.4.1.5504.5.7.1.2.1.2 | PerfCurrentCount | read-only | Current count of unbalanced frames. |
| PER isdnPerCurErrorSeconds | 1.3.6.1.4.1.5504.5.7.1.2.1.3 | PerfCurrentCount | read-only | Curent ISDN Activation error seconds. |
| PER isdnPerCurFsyncSeconds | 1.3.6.1.4.1.5504.5.7.1.2.1.4 | PerfCurrentCount | read-only | Currents Frame synch loss seconds . |
| TIK isdnPerfCurTimeElapsed | 1.3.6.1.4.1.5504.5.7.1.2.1.5 | TimeTicks | read-only | In the current 15 Min period number of seconds elapsed that
these counts represent. |
| isdnPerfDataPreviousTable | 1.3.6.1.4.1.5504.5.7.1.3 | | not-accessible | The ISDN BRI S/T interface performance table,
it contains statistics and information about
the status of the ISDN S/T interface,
including the error statistics for previous 15 minutes. |
| isdnPerfDataPreviousEntry | 1.3.6.1.4.1.5504.5.7.1.3.1 | | not-accessible | An entry in Previous performance table(for last 15 minutes before
the current performance period) for each S/T interface. |
| NUM isdnPerfPrevBadAmiViolation | 1.3.6.1.4.1.5504.5.7.1.3.1.1 | PerfIntervalCount | read-only | count of frames with incorrect number of AMI violations
in previous 15 minutes. |
| NUM isdnPerfPrevUnbalancedFrame | 1.3.6.1.4.1.5504.5.7.1.3.1.2 | PerfIntervalCount | read-only | In previous 15 minutes ,count of unbalanced frames. |
| NUM isdnPerPrevFsyncSeconds | 1.3.6.1.4.1.5504.5.7.1.3.1.3 | PerfIntervalCount | read-only | Frame synch error seconds in previous 15 minues. |
| NUM isdnPerfPrevErrorSeconds | 1.3.6.1.4.1.5504.5.7.1.3.1.4 | PerfIntervalCount | read-only | In previous 15 minutes ISDN Activation error seconds |
| isdnPerfDataTotalTable | 1.3.6.1.4.1.5504.5.7.1.4 | | not-accessible | The ISDN BRI S/T interface performance table,
it contains statistics and information about
the status of the ISDN S/T interface,
including the error statistics for up to the
the last 24 hours. This is maintained in 15
minute intervals NOT including the current
interval being accumulated. When the current period
reaches 15 minutes, it's counts are rolled into the
previous entry and added to these values. The 97th entry,
previous to the 24 hour period is no longer included in
these counts. |
| isdnPerfDataTotalEntry | 1.3.6.1.4.1.5504.5.7.1.4.1 | | not-accessible | An entry in total performance table for each S/T interface. |
| PER isdnPerfTotalBadAmiViolation | 1.3.6.1.4.1.5504.5.7.1.4.1.1 | PerfTotalCount | read-only | Total count of frames with incorrect number of AMI violations. |
| PER isdnPerfTotalUnbalancedFrame | 1.3.6.1.4.1.5504.5.7.1.4.1.2 | PerfTotalCount | read-only | Total count of unbalanced frames. |
| PER isdnPerTotalFsyncSeconds | 1.3.6.1.4.1.5504.5.7.1.4.1.3 | PerfTotalCount | read-only | Total Frame synch error seconds. |
| PER isdnPerfTotalErrorSeconds | 1.3.6.1.4.1.5504.5.7.1.4.1.4 | PerfTotalCount | read-only | ISDN Activation error seconds |
| I32 isdnPerfTotalTimePeriodsElapsed | 1.3.6.1.4.1.5504.5.7.1.4.1.5 | Integer32 | read-only | Number of 15 minute time periods that have been used
in the performance total table. This value is normally
96 indicating a valid 24 hour time period except in the
cases of a restart of this agent. |
| isdnAlarmProfileTable | 1.3.6.1.4.1.5504.5.7.1.5 | | not-accessible | This table contains information for Alarm conditions.
The table is indexed by IfIndex . The alarm profile will be set
per port basis usig ifIndex by the application when the system comes up.
The operator can not create the profile , he can only change it . |
| isdnAlarmProfileEntry | 1.3.6.1.4.1.5504.5.7.1.5.1 | | not-accessible | An entry in AlarmProfile Table. |
| U32 isdnThresholdAmiViolations | 1.3.6.1.4.1.5504.5.7.1.5.1.1 | Unsigned32 | read-write | Threshold for number of AMI violation .
If the number of violations cross this
threshold then the notification is sent to NMS.
0 will disable the trap. The default value is 0.
There is no range speciffied for this. |
| U32 isdnThresholdUnbalancedFrame | 1.3.6.1.4.1.5504.5.7.1.5.1.2 | Unsigned32 | read-write | Threshold for number of unbalanced frame after which the trap will
be send to NMS.0 will disable the trap. The default value is 0.
There is no range speciffied for this. |
