| OID symbolic | OID numeric | Type | Access | Description |
|---|
| zhonePingMIB | 1.3.6.1.4.1.5504.4.1.19 | | | The Ping MIB (ZHONE-DISMAN-PING-MIB) provides the capability of
controlling the use of the ping function at a remote
host. |
| zhonePingNotifications | 1.3.6.1.4.1.5504.4.1.19.0 | | | |
| NTF zhonePingTestCompleted | 1.3.6.1.4.1.5504.4.1.19.0.1 | | | Generated at the completion of a ping test when the
corresponding zhonePingCtlTrapGeneration object is set to
testCompletion(4). |
| zhonePingObjects | 1.3.6.1.4.1.5504.4.1.19.1 | | | |
| U32 zhonePingMaxConcurrentRequests | 1.3.6.1.4.1.5504.4.1.19.1.1 | Unsigned32 | read-write | The maximum number of concurrent active ping requests
that are allowed within an agent implementation. A value
of 0 for this object implies that there is no limit for
the number of concurrent active requests in effect. |
| INT zhonePingCtlIndexNext | 1.3.6.1.4.1.5504.4.1.19.1.2 | INTEGER | read-only | This object contains an appropriate value to
be used for zhonePingCtlIndex when creating
entries in the zhonePingCtlTable. The value
0 indicates that no unassigned entries are
available. To obtain the zhonePingCtlIndex
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this object. After each
retrieval, the agent should modify the value to
the next unassigned index.
After a manager retrieves a value the agent will
determine through its local policy when this index
value will be made available for reuse. |
| zhonePingCtlTable | 1.3.6.1.4.1.5504.4.1.19.1.3 | | not-accessible | Defines the ping Control Table for providing, via SNMP,
the capability of performing ping operations at
a remote host. The results of these operations are
stored in the zhonePingResultsTable. |
| zhonePingCtlEntry | 1.3.6.1.4.1.5504.4.1.19.1.3.1 | | not-accessible | None |
| INT zhonePingCtlIndex | 1.3.6.1.4.1.5504.4.1.19.1.3.1.1 | INTEGER | read-only | When used in conjunction with such a security policy all
entries in the table belonging to a particular user (or
group) will have the same value for this initial index.
For a given user's entries in a particular table, the
object identifiers for the information in these entries
will have the same subidentifiers (except for the 'column'
subidentifier) up to the end of the encoded owner index. |
| IPt zhonePingCtlTargetAddressType | 1.3.6.1.4.1.5504.4.1.19.1.3.1.2 | InetAddressType | read-create | Specifies the type of host address to be used at a remote
host for performing a ping operation. |
| IP zhonePingCtlTargetAddress | 1.3.6.1.4.1.5504.4.1.19.1.3.1.3 | InetAddress | read-create | Specifies the host address to be used at a remote host for
performing a ping operation. The host address type is
determined by the object value of corresponding
zhonePingCtlTargetAddressType.
A value for this object MUST be set prior to transitioning
its corresponding zhonePingCtlEntry to active(1) via
zhonePingCtlRowStatus. |
| U32 zhonePingCtlDataSize | 1.3.6.1.4.1.5504.4.1.19.1.3.1.4 | Unsigned32 | read-create | Specifies the size of the data portion to be
transmitted in a ping operation in octets. A ping
request is usually an ICMP message encoded
into an IP packet. An IP packet has a maximum size
of 65535 octets. Subtracting the size of the ICMP
or UDP header (both 8 octets) and the size of the IP
header (20 octets) yields a maximum size of 65507
octets. |
| U32 zhonePingCtlTimeOut | 1.3.6.1.4.1.5504.4.1.19.1.3.1.5 | Unsigned32 | read-create | Specifies the time-out value, in seconds, for a
remote ping operation. |
| U32 zhonePingCtlProbeCount | 1.3.6.1.4.1.5504.4.1.19.1.3.1.6 | Unsigned32 | read-create | Specifies the number of times to perform a ping
operation at a remote host. |
| INT zhonePingCtlAdminStatus | 1.3.6.1.4.1.5504.4.1.19.1.3.1.7 | INTEGER | read-create | Reflects the desired state that a zhonePingCtlEntry should be
in:
enabled(1) - Attempt to activate the test as defined by
this zhonePingCtlEntry.
disabled(2) - Deactivate the test as defined by this
zhonePingCtlEntry.
Refer to the corresponding zhonePingResultsOperStatus to
determine the operational state of the test defined by
this entry. |
| OCT zhonePingCtlDataFill | 1.3.6.1.4.1.5504.4.1.19.1.3.1.8 | OCTET STRING | read-create | The content of this object is used together with the
corresponding zhonePingCtlDataSize value to determine how to
fill the data portion of a probe packet. The option of
selecting a data fill pattern can be useful when links
are compressed or have data pattern sensitivities. The
contents of zhonePingCtlDataFill should be repeated in a ping
packet when the size of the data portion of the ping
packet is greater than the size of zhonePingCtlDataFill. |
| U32 zhonePingCtlFrequency | 1.3.6.1.4.1.5504.4.1.19.1.3.1.9 | Unsigned32 | read-create | The number of seconds to wait before repeating a ping test
as defined by the value of the various objects in the
corresponding row.
A single ping test consists of a series of ping probes.
The number of probes is determined by the value of the
corresponding zhonePingCtlProbeCount object. After a single
test completes the number of seconds as defined by the
value of zhonePingCtlFrequency MUST elapse before the
next ping test is started.
A value of 0 for this object implies that the test
as defined by the corresponding entry will not be
repeated. |
| U32 zhonePingCtlMaxRows | 1.3.6.1.4.1.5504.4.1.19.1.3.1.10 | Unsigned32 | read-create | None |
| STO zhonePingCtlStorageType | 1.3.6.1.4.1.5504.4.1.19.1.3.1.11 | StorageType | read-create | The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row. |
| BIT zhonePingCtlTrapGeneration | 1.3.6.1.4.1.5504.4.1.19.1.3.1.12 | Bits | read-create | The value of this object determines when and if
to generate a notification for this entry:
probeFailure(0) - Generate a zhonePingProbeFailed
notification subject to the value of
zhonePingCtlTrapProbeFailureFilter. The object
zhonePingCtlTrapProbeFailureFilter can be used
to specify the number of successive probe failures
that are required before a zhonePingProbeFailed
notification can be generated.
testFailure(1) - Generate a zhonePingTestFailed
notification. In this instance the object
zhonePingCtlTrapTestFailureFilter can be used to
determine the number of probe failures that
signal when a test fails.
testCompletion(2) - Generate a zhonePingTestCompleted
notification.
The value of this object defaults to zero, indicating
that none of the above options have been selected. |
| U32 zhonePingCtlTrapProbeFailureFilter | 1.3.6.1.4.1.5504.4.1.19.1.3.1.13 | Unsigned32 | read-create | The value of this object is used to determine when
to generate a zhonePingProbeFailed NOTIFICATION.
Setting zhonePingCtlTrapGeneration
to probeFailure(0) implies that a zhonePingProbeFailed
NOTIFICATION is generated only when the number of
successive probe failures as indicated by the
value of zhonePingCtlTrapPrbefailureFilter fail within
a given ping test. |
| U32 zhonePingCtlTrapTestFailureFilter | 1.3.6.1.4.1.5504.4.1.19.1.3.1.14 | Unsigned32 | read-create | The value of this object is used to determine when
to generate a zhonePingTestFailed NOTIFICATION.
Setting zhonePingCtlTrapGeneration to testFailure(1)
implies that a pingTestFailed NOTIFICATION is
generated only when the number of ping failures
within a test exceed the value of
zhonePingCtlTrapTestFailureFilter. |
| OID zhonePingCtlType | 1.3.6.1.4.1.5504.4.1.19.1.3.1.15 | OBJECT IDENTIFIER | read-create | The value of this object is used to either report or
select the implementation method to be used for
calculating a ping response time. The value of this
object MAY be selected from zhonePingImplementationTypeDomains.
Additional implementation types SHOULD be allocated as
required by implementers of the ZHONE-DISMAN-PING-MIB under
their enterprise specific registration point and not
beneath zhonePingImplementationTypeDomains. |
| STR zhonePingCtlDescr | 1.3.6.1.4.1.5504.4.1.19.1.3.1.16 | SnmpAdminString | read-create | The purpose of this object is to provide a
descriptive name of the remote ping test. |
| IPt zhonePingCtlSourceAddressType | 1.3.6.1.4.1.5504.4.1.19.1.3.1.17 | InetAddressType | read-create | Specifies the type of the source address,
zhonePingCtlSourceAddress, to be used at a remote host
when performing a ping operation. |
| IP zhonePingCtlSourceAddress | 1.3.6.1.4.1.5504.4.1.19.1.3.1.18 | InetAddress | read-create | Use the specified IP address (which must be given
in numeric form, not as a hostname) as the source
address in outgoing probe packets. On hosts with
more than one IP address, this option can be used
to force the source address to be something other
than the primary IP address of the interface the
probe packet is sent on. If the IP address is not
one of this machine's interface addresses, an error
is returned and nothing is sent. A zero length
octet string value for this object disables source
address specification.
The address type (InetAddressType) that relates to
this object is specified by the corresponding value
of zhonePingCtlSourceAddressType. |
| NUM zhonePingCtlIfIndex | 1.3.6.1.4.1.5504.4.1.19.1.3.1.19 | InterfaceIndexOrZero | read-create | Setting this object to an interface's ifIndex prior
to starting a remote ping operation directs
the ping probes to be transmitted over the
specified interface. A value of zero for this object
means that this option is not enabled. |
| T/F zhonePingCtlByPassRouteTable | 1.3.6.1.4.1.5504.4.1.19.1.3.1.20 | TruthValue | read-create | The purpose of this object is to optionally enable
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an attached network. If the
host is not on a directly-attached network, an
error is returned. This option can be used to perform
the ping operation to a local host through an
interface that has no route defined (e.g., after the
interface was dropped by routed). |
| U32 zhonePingCtlDSField | 1.3.6.1.4.1.5504.4.1.19.1.3.1.21 | Unsigned32 | read-create | Specifies the value to store in the Differentiated
Services (DS) Field in the IP packet used to
encapsulate the ping probe. The DS Field is defined
as the Type of Service (TOS) octet in a IPv4 header
or as the Traffic Class octet in a IPv6 header.
The value of this object must be a decimal integer
in the range from 0 to 255. This option can be used
to determine what effect an explicit DS Field setting
has on a ping response. Not all values are legal or
meaningful. A value of 0 means that the function
represented by this option is not supported. DS Field
usage is often not supported by IP implementations and
not all values are supported. Refer to RFC 2474 for
guidance on usage of this field. |
| ROW zhonePingCtlRowStatus | 1.3.6.1.4.1.5504.4.1.19.1.3.1.22 | RowStatus | read-create | This object allows entries to be created and deleted
in the zhonePingCtlTable. Deletion of an entry in this
table results in all corresponding (same
zhonePingCtlOwnerIndex and zhonePingCtlTestName index values)
zhonePingResultsTable entries being deleted.
A value MUST be specified for zhonePingCtlTargetAddress
prior to a transition to active(1) state being
accepted.
Activation of a remote ping operation is controlled
via zhonePingCtlAdminStatus and not by changing
this object's value to active(1).
Transitions in and out of active(1) state are not
allowed while an entry's zhonePingResultsOperStatus is
active(1) with the exception that deletion of
an entry in this table by setting its RowStatus
object to destroy(6) will stop an active
ping operation.
The operational state of a ping operation
can be determined by examination of its
zhonePingResultsOperStatus object.
NOTE: ROWS ARE AUTO-DELETED UP ON COMPLETION REGARDLESS OF OUTCOME |
| zhonePingResultsTable | 1.3.6.1.4.1.5504.4.1.19.1.4 | | not-accessible | Defines the Ping Results Table for providing
the capability of performing ping operations at
a remote host. The results of these operations are
stored in the zhonePingResultsTable and the zhonePingPastProbeTable.
An entry is added to the zhonePingResultsTable when an
zhonePingCtlEntry is started by successful transition
of its zhonePingCtlAdminStatus object to enabled(1).
An entry is removed from the zhonePingResultsTable when
its corresponding zhonePingCtlEntry is deleted. |
| zhonePingResultsEntry | 1.3.6.1.4.1.5504.4.1.19.1.4.1 | | not-accessible | Defines an entry in the zhonePingResultsTable. The
zhonePingResultsTable has the same indexing as the
zhonePingCtlTable in order for a zhonePingResultsEntry to
correspond to the zhonePingCtlEntry that caused it to
be created. |
| INT zhonePingResultsOperStatus | 1.3.6.1.4.1.5504.4.1.19.1.4.1.1 | INTEGER | read-only | Reflects the operational state of a zhonePingCtlEntry:
enabled(1) - Test is active.
disabled(2) - Test has stopped. |
| IPt zhonePingResultsIpTargetAddressType | 1.3.6.1.4.1.5504.4.1.19.1.4.1.2 | InetAddressType | read-only | This objects indicates the type of address stored
in the corresponding zhonePingResultsIpTargetAddress
object. |
| IP zhonePingResultsIpTargetAddress | 1.3.6.1.4.1.5504.4.1.19.1.4.1.3 | InetAddress | read-only | This objects reports the IP address associated
with a zhonePingCtlTargetAddress value when the destination
address is specified as a DNS name. The value of
this object should be a zero length octet string
when a DNS name is not specified or when a
specified DNS name fails to resolve. |
| U32 zhonePingResultsMinRtt | 1.3.6.1.4.1.5504.4.1.19.1.4.1.4 | Unsigned32 | read-only | The minimum ping round-trip-time (RTT) received. A value
of 0 for this object implies that no RTT has been received. |
| U32 zhonePingResultsMaxRtt | 1.3.6.1.4.1.5504.4.1.19.1.4.1.5 | Unsigned32 | read-only | The maximum ping round-trip-time (RTT) received. A value
of 0 for this object implies that no RTT has been received. |
| U32 zhonePingResultsAverageRtt | 1.3.6.1.4.1.5504.4.1.19.1.4.1.6 | Unsigned32 | read-only | The current average ping round-trip-time (RTT). |
| U32 zhonePingResultsProbeResponses | 1.3.6.1.4.1.5504.4.1.19.1.4.1.7 | Unsigned32 | read-only | Number of responses received for the corresponding
zhonePingCtlEntry and zhonePingResultsEntry. The value of this object
MUST be reported as 0 when no probe responses have been
received. |
| U32 zhonePingResultsSentProbes | 1.3.6.1.4.1.5504.4.1.19.1.4.1.8 | Unsigned32 | read-only | The value of this object reflects the number of probes sent
for the corresponding zhonePingCtlEntry and zhonePingResultsEntry.
The value of this object MUST be reported as 0 when no probes
have been sent. |
| U32 zhonePingResultsRttSumOfSquares | 1.3.6.1.4.1.5504.4.1.19.1.4.1.9 | Unsigned32 | read-only | This object contains the sum of the squares for all ping
responses received. Its purpose is to enable standard
deviation calculation. The value of this object MUST
be reported as 0 when no ping responses have been
received. |
| DAT zhonePingResultsLastGoodProbe | 1.3.6.1.4.1.5504.4.1.19.1.4.1.10 | DateAndTime | read-only | Date and time when the last response was received for
a probe. |
| zhonePingConformance | 1.3.6.1.4.1.5504.4.1.19.2 | | | |
| zhonePingGroups | 1.3.6.1.4.1.5504.4.1.19.2.2 | | | |
| zhonePingGroup | 1.3.6.1.4.1.5504.4.1.19.2.2.1 | | | The group of objects that comprise the remote ping
capability. |
| zhonePingTimeStampGroup | 1.3.6.1.4.1.5504.4.1.19.2.2.2 | | | The group of DateAndTime objects. |
| zhonePingNotificationsGroup | 1.3.6.1.4.1.5504.4.1.19.2.2.3 | | | The notification which are required to be supported by
implementations of this MIB. |
| zhonePingImplementationTypeDomains | 1.3.6.1.4.1.5504.4.1.19.3 | | | |
| zhonePingIcmpEcho | 1.3.6.1.4.1.5504.4.1.19.3.1 | | | Indicates that an implementation is using the Internet
Control Message Protocol (ICMP) 'ECHO' facility. |
| zhonePingUdpEcho | 1.3.6.1.4.1.5504.4.1.19.3.2 | | | Indicates that an implementation is using the UDP echo
port (7). |
| zhonePingSnmpQuery | 1.3.6.1.4.1.5504.4.1.19.3.3 | | | Indicates that an implementation is an SNMP query to
calculate a round trip time. |
| zhonePingTcpConnectionAttempt | 1.3.6.1.4.1.5504.4.1.19.3.4 | | | Indicates that an implementation is attempting to
connect to a TCP port in order to calculate a round
trip time. |
