Wellfleet-FSM-MIB

All MIBs › Wellfleet-FSM-MIB

Category: Wellfleet BayNetworks System Management

Description: Manages Wellfleet Finite State Machine protocol states and transition event statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-FSM-MIB?

Wellfleet-FSM-MIB is a legacy vendor-specific SNMP module from Wellfleet Communications (a router vendor later absorbed into Bay Networks/Nortel) intended to manage Finite State Machine (FSM) protocol state and transition event statistics on Wellfleet routers. Based on its short description, it exposes protocol-level state information - the current state of internal protocol state machines and counts of state transition events - rather than general system inventory data. This makes it a software-status/diagnostic MIB focused on protocol health: unexpected or excessive state transitions in a monitored FSM can indicate protocol instability, flapping, or a software fault in the router's control-plane logic, though no concrete object names are available in the source material to confirm exact fields. No explicit dependency on other MIBs is evident from the available description. Typical deployment context is legacy Wellfleet/Bay Networks routers in enterprise or carrier networks where this diagnostic MIB would have been used for troubleshooting protocol behavior. Engineers can download the Wellfleet-FSM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-FSM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet/Bay Networks router (legacy)

Monitoring Examples

No sample objects were provided for this MIB, so specific object names cannot be referenced, and a realistic monitoring scenario cannot be responsibly constructed without inventing plausible-sounding OIDs. In general, an administrator would expect to poll FSM state and transition-count objects to detect protocol flapping, but the exact table/object names require access to the original MIB source. This entry should be treated as a placeholder pending access to the module's object definitions.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Gauge

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfFileSystemGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfFsBase	1.3.6.1.4.1.18.3.3.2.12.1
OCT wfFsVolLastUpdated	1.3.6.1.4.1.18.3.3.2.12.1.1	OCTET STRING	read-only	Date and time the volume table was last updated
GAU wfFsVols	1.3.6.1.4.1.18.3.3.2.12.1.2	Gauge	read-only	The number of rows in the volume table
wfFsVolTable	1.3.6.1.4.1.18.3.3.2.12.2		not-accessible	Volume table
wfFsVolEntry	1.3.6.1.4.1.18.3.3.2.12.2.1		not-accessible	A row in the Volume table
INT wfFsVolID	1.3.6.1.4.1.18.3.3.2.12.2.1.1	INTEGER	read-only	Volume number
INT wfFsSlot	1.3.6.1.4.1.18.3.3.2.12.2.1.2	INTEGER	read-only	Processor owning the volume
INT wfFsType	1.3.6.1.4.1.18.3.3.2.12.2.1.3	INTEGER	read-only	Type of volume - DOS, NVFS or UNIX
INT wfFsRemoveable	1.3.6.1.4.1.18.3.3.2.12.2.1.4	INTEGER	read-only	Can this file system be removed or is it a fixed file system
INT wfFsAccess	1.3.6.1.4.1.18.3.3.2.12.2.1.5	INTEGER	read-only	Read only or read-write file system. DOS file systems are always set to unknown since we can't tell what the state is until we actually try to write to the disk.
INT wfFsState	1.3.6.1.4.1.18.3.3.2.12.2.1.6	INTEGER	read-only	The state that the file system is in. If it is corrupted then it is unusable, if it is busy, the MIB is being updated. Floppy not present is a state used in DOS only and means that the floppy isn't there or we couldn't mount it. Incomplete means that we got a mount for a DOS floppy duing boot, but because of 30 second timeouts in DOS, we are not willing to take the hit during boot. Fill in minimal information and let Site Manager do the 'DIR' that will fill in the rest.
GAU wfFsSize	1.3.6.1.4.1.18.3.3.2.12.2.1.7	Gauge	read-only	Physical size in bytes
GAU wfFsFreeSize	1.3.6.1.4.1.18.3.3.2.12.2.1.8	Gauge	read-only	Total available bytes
GAU wfFsContigFree	1.3.6.1.4.1.18.3.3.2.12.2.1.9	Gauge	read-only	The amount of contiguous bytes free. In DOS and UNIX, contiguous = free. In NVFS, this may not be true.
GAU wfFsNumFiles	1.3.6.1.4.1.18.3.3.2.12.2.1.10	Gauge	read-only	The number of files on this volume
OCT wfFsLastWritten	1.3.6.1.4.1.18.3.3.2.12.2.1.11	OCTET STRING	read-only	The last time a write request was written to this volume
OCT wfFsBecameActive	1.3.6.1.4.1.18.3.3.2.12.2.1.12	OCTET STRING	read-only	The date and time this volume became active
INT wfFsAction	1.3.6.1.4.1.18.3.3.2.12.2.1.13	INTEGER	read-write	When set, performs a volume command (compact, format, dir, purge)
OID wfFsActionArg	1.3.6.1.4.1.18.3.3.2.12.2.1.14	OBJECT IDENTIFIER	read-write	Optional argument for directory action for viewing file hierarchies
INT wfFsPercentDone	1.3.6.1.4.1.18.3.3.2.12.2.1.15	INTEGER	read-only	Percent of task completed
wfFsDirBase	1.3.6.1.4.1.18.3.3.2.12.3
GAU wfFsDirEntries	1.3.6.1.4.1.18.3.3.2.12.3.1	Gauge	read-only	Number of entries in the directory table
OCT wfFsDirLastUpdated	1.3.6.1.4.1.18.3.3.2.12.3.2	OCTET STRING	read-only	Time the directory table was last updated
wfFsDirTable	1.3.6.1.4.1.18.3.3.2.12.5		not-accessible	Directory table
wfFsDirEntry	1.3.6.1.4.1.18.3.3.2.12.5.1		not-accessible	An entry in the directory table
INT wfFsDirVolID	1.3.6.1.4.1.18.3.3.2.12.5.1.1	INTEGER	read-only	Volume number that this directory entry is contained on
OID wfFsDirFileIndex	1.3.6.1.4.1.18.3.3.2.12.5.1.2	OBJECT IDENTIFIER	read-only	Hierarchical file index
STR wfFsDirFileName	1.3.6.1.4.1.18.3.3.2.12.5.1.3	DisplayString	read-only	Name of the file
OCT wfFsDirCreated	1.3.6.1.4.1.18.3.3.2.12.5.1.4	OCTET STRING	read-only	When the file was created
GAU wfFsDirFileSize	1.3.6.1.4.1.18.3.3.2.12.5.1.5	Gauge	read-only	Size of the file
GAU wfFsDirFileMask	1.3.6.1.4.1.18.3.3.2.12.5.1.6	Gauge	read-only	Access mode on file for UNIX and DOS file systems

RFC description

Monitors file system volume information, storage status, and file system resources on Wellfleet systems.

Start monitoring Wellfleet/Bay Networks router, legacy (protocol state-machine transition-event status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-FSM-MIB

What Is Wellfleet-FSM-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description