| OID symbolic | OID numeric | Type | Access | Description |
|---|
| wfAtmCESGroup | 1.3.6.1.4.1.18.3.4.23.4 | | | |
| wfAtmCESObjects | 1.3.6.1.4.1.18.3.4.23.4.1 | | | |
| wfAtmCESConfTable | 1.3.6.1.4.1.18.3.4.23.4.1.1 | | not-accessible | The CES configuration table used to manage interworking
between CBR interfaces or channels and ATM Virtual Channel
Links (VCLs). |
| wfAtmCESConfEntry | 1.3.6.1.4.1.18.3.4.23.4.1.1.1 | | not-accessible | An entry in the CES configuration table. There is one
entry in the table per CES entity, mapping one CBR
interface, channel, or bundle to an ATM VCL. |
| INT wfAtmCESConfDelete | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.1 | INTEGER | read-write | Create/delete MIB instance parameter. |
| INT wfAtmCESConfDisable | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.2 | INTEGER | read-write | Enable/Disable MIB instance parameter. |
| INT wfAtmCESConfAtmIndex | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.3 | INTEGER | read-only | The value of this object is equal to the line number
value of the ATM Port interface mapped through this CES IWF
to a CBR interface. |
| INT wfAtmCESConfCbrIndex | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.4 | INTEGER | read-only | The value of this object is equal to the line number value
of the CBR interface, channel, or bundle that is being
cross-connected to this ATM VCL. |
| INT wfAtmCESConfAtmVpi | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.5 | INTEGER | read-only | The value of this object is equal to the VPI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. |
| INT wfAtmCESConfAtmVci | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.6 | INTEGER | read-only | The value of this object is equal to the VCI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. |
| INT wfAtmCESConfCfgAtmVpi | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.7 | INTEGER | read-write | The value of this object is equal to the VPI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. Setting this attribute when wfAtmCESConfConnType
is set to activeSvc or passiveSvc has no effect. |
| INT wfAtmCESConfCfgAtmVci | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.8 | INTEGER | read-write | The value of this object is equal to the VCI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. Setting this attribute when wfAtmCESConfConnType
is set to activeSvc or passiveSvc has no effect. |
| INT wfAtmCESConfVclCct | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.9 | INTEGER | read-write | Identifies the object which corresponds to the Wellfleet circuit
number. |
| INT wfAtmCESConfCbrService | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.10 | INTEGER | read-write | Define if DSx/Ex service is structured or unstructured. A
structured(2) interface is some nx64kbKbps. An unstructured
(1) interface is 1.544Mbps, 2.048Mbps, 6.312Mbps, 44.736 Mbps,
or 34.368 Mbps. unstructured(1) passes all bits through the
ATM network. strucutured(2) passes data bits through the
ATM network, and may also pass signalling bits.
At this time, only unstructured mode is defined for the
44.736 Mbps and 34.368 Mbps services. |
| INT wfAtmCESConfCbrClockMode | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.11 | INTEGER | read-write | Define if DSx/Ex service clocking mode. This maps into
transmit clock source of CBR interface.
For structured modes this value, if present, must be set to
synchronous(1). |
| INT wfAtmCESConfCas | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.12 | INTEGER | read-write | This parameter selects which AAL1 Format should be used:
Basic does not carry CAS bits, and uses a single 125 usec frame.
e1Cas, ds1SfCas, dS1EsfCas and j2Cas carry CAS bits in a
multiframe structure for E1, DS1 SF, DS1 ESF and J2
respectively.
This applies to structured interfaces only. Default is
basic (1). For unstructured interfaces this value, if present,
must be set to the default of basic (1). |
| INT wfAtmCESConfPartialFill | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.13 | INTEGER | read-write | If partial cell fill is used, the number of user octets per
cell must be set with this parameter. Setting this parameter
to zero disables partial cell fill, and causes all cells to
be completely filled before they are sent. |
| INT wfAtmCESConfBufMaxSize | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.14 | INTEGER | read-write | Define maximum size in 10 microsecond increments of the
reassembly buffer. Some implementations may want allow the
maximum buffer size to be programmed to a size less than the
physical limit to reduce the maximum delay through a circuit. |
| INT wfAtmCESConfCdvRxT | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.15 | INTEGER | read-write | The maximum cell arrival jitter in 10 usec increments that
the reassembly process will tolerate in the cell stream
without producing errors on the CBR service interface. |
| INT wfAtmCESConfCellLossIntegrationPeriod | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.16 | INTEGER | read-write | The time in milliseconds for the cell loss integration period.
If cells are continuously lost for this period of time,
wfAtmCESCellLossStatus is set to loss (2). The
default definition is 2500. |
| INT wfAtmCESConfConnType | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.17 | INTEGER | read-write | The type of ATM connectivity between associated CES IWF's.
Valid values are:
other - none of the types specified below
pvc - supporting connectivity is a permanent
virtual connection
activeSvc - attempt calls whenever none established
passiveSvc - accept calls |
| OCT wfAtmCESConfLocalAddr | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.18 | OCTET STRING | read-write | The ATM address of the local CES IWF process. This address
may be used by the automatic SVC establishment procedures to
identify the intended recipient CES IWF of an incoming automatic
SVC call request. Optionally, the MAX-ACCESS of this object
may be read-only, for those implementations where it is
not desired to manually configure this address. |
| INT wfAtmCESConfAdminStatus | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.19 | INTEGER | read-write | The desired administrative status of the CES interworking
function. The up and down states indicate that the traffic
flow is enabled or disabled respectively across the CES
interworking function. |
| INT wfAtmCESConfOperStatus | 1.3.6.1.4.1.18.3.4.23.4.1.1.1.20 | INTEGER | read-only | The operational status of the CES interworking function.
The up and down states indicate that the traffic flow is
enabled or disabled respectively across the CES interworking
function. The unknown state indicates that the state of the
CES interworking function cannot be determined. The state
will be down or unknown if the supporting CBR or ATM
interfaces are down or unknown, respectively. |
| wfAtmCESStatsTable | 1.3.6.1.4.1.18.3.4.23.4.1.2 | | not-accessible | The CES AAL1 statistical data table. |
| wfAtmCESStatsEntry | 1.3.6.1.4.1.18.3.4.23.4.1.2.1 | | not-accessible | An entry in the CES AAL1 Stats table. There is one
entry in this table corresponding to each entry in the
wfAtmCESConfTable. |
| INT wfAtmCESStatsAtmIndex | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.1 | INTEGER | read-only | The value of this object is equal to the line number
value of the ATM Port interface mapped through this CES IWF
to a CBR interface. |
| INT wfAtmCESStatsAtmVpi | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.2 | INTEGER | read-only | The value of this object is equal to the VPI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. |
| INT wfAtmCESStatsAtmVci | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.3 | INTEGER | read-only | The value of this object is equal to the VCI used
by the ATM VCL mapped through this CES IWF to a CBR
interface. |
| INT wfAtmCESStatsCbrIndex | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.4 | INTEGER | read-only | The value of this object is equal to the line number value
of the CBR interface, channel, or bundle that is being
cross-connected to this ATM VCL. |
| INT wfAtmCESStatsVclCct | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.5 | INTEGER | read-only | Identifies the object which corresponds to the Wellfleet circuit
number. |
| CTR wfAtmCESStatsReassCells | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.6 | Counter | read-only | This count gives the number of cells played out to the
CES Service Interface. It excludes cells that were
discarded for any reason, including cells that were not used
due to being declared misinserted, or discarded while the
reassembler was waiting to achieve synchronization. |
| CTR wfAtmCESStatsHdrErrors | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.7 | Counter | read-only | The count of the number of AAL1 header errors detected,
including those corrected. Header errors include correctable
and uncorrectable CRC, plus bad parity. |
| CTR wfAtmCESStatsPointerReframes | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.8 | Counter | read-only | This records the count of the number of events in which the
AAL1 reassembler found that an SDT pointer is not where it is
expected, and the pointer must be reacquired. This count is
only meaningful for structured CES modes, as unstructured CES
modes do not use pointers. For unstructured CES modes, this
count, if present, should indicate zero. |
| CTR wfAtmCESStatsPointerParityErrors | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.9 | Counter | read-only | This records the count of the number of events in which the
AAL1 reassembler detects a parity check failure at the point
where a structured data pointer is expected. This count is only
meaningful for structured CES modes, as unstructured CES modes
do not use pointers. For unstructured CES modes, this count, if
present, should indicate zero. |
| CTR wfAtmCESStatsAal1SeqErrors | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.10 | Counter | read-only | Number of times that the sequence number of an incoming AAL1
Type 1 SAR-PDU causes a transition from the 'sync' state to
the 'out of sequence' state, as defined by ITU-T I.363.1. |
| CTR wfAtmCESStatsLostCells | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.11 | Counter | read-only | Number of lost cells, as detected by the AAL1 sequence number
processing, for example. This records the count of the number
of cells detected as lost in the network prior to the
destination CES IWF AAL1 layer processing. |
| CTR wfAtmCESStatsMisinsertedCells | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.12 | Counter | read-only | Number of AAL1 sequence violations which the AAL Convergence
sublayer interprets as a misinserted cell, as defined by
ITU-T I.363.1. |
| CTR wfAtmCESStatsBufUnderflows | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.13 | Counter | read-only | Number of buffer underflows. This records the count of the
number of times the CES reassembly buffer underflows. In the
case of a continuous underflow caused by a loss of ATM cell
flow, a single buffer underflow should be counted. If the CES
IWF is implemented with multiple buffers (such as a cell level
buffer and a bit level buffer), then either buffer underflow
will cause this count to be incremented. |
| CTR wfAtmCESStatsBufOverflows | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.14 | Counter | read-only | Number of buffer overflows. This records the count of the
number of times the CES reassembly buffer overflows. If the CES
IWF is implemented with multiple buffers (such as a cell level
buffer and a bit level buffer, then either buffer overflow will
cause this count to be incremented |
| INT wfAtmCESStatsCellLossStatus | 1.3.6.1.4.1.18.3.4.23.4.1.2.1.15 | INTEGER | read-only | When cells are continuously lost for the number of milliseconds
specified by wfAtmCESConfCellLossIntegrationPeriod, the value is set
to loss (2). When cells are no longer lost, the value is set
to noLoss (1). |
