-- Nortel Networks CES Management MIB. -- Based on: Management CES-IS V2.0 af-vtoa-0078.000 Wellfleet-CES-MIB DEFINITIONS ::= BEGIN IMPORTS Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 wfAtmInterfaceGroup FROM Wellfleet-COMMON-MIB; wfAtmCESGroup OBJECT IDENTIFIER ::= { wfAtmInterfaceGroup 4 } -- This is the MIB module based on the ATM Forum Circuit Emulation -- Service Interoperability Specification Version 2.0. -- -- CES Configuration Table wfAtmCESObjects OBJECT IDENTIFIER ::= { wfAtmCESGroup 1 } wfAtmCESConfTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmCESConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CES configuration table used to manage interworking between CBR interfaces or channels and ATM Virtual Channel Links (VCLs)." ::= { wfAtmCESObjects 1 } wfAtmCESConfEntry OBJECT-TYPE SYNTAX WfAtmCESConfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the CES configuration table. There is one entry in the table per CES entity, mapping one CBR interface, channel, or bundle to an ATM VCL." INDEX { wfAtmCESConfAtmIndex, wfAtmCESConfCbrIndex } ::= { wfAtmCESConfTable 1 } WfAtmCESConfEntry ::= SEQUENCE { wfAtmCESConfDelete INTEGER, wfAtmCESConfDisable INTEGER, wfAtmCESConfAtmIndex INTEGER, wfAtmCESConfCbrIndex INTEGER, wfAtmCESConfAtmVpi INTEGER, wfAtmCESConfAtmVci INTEGER, wfAtmCESConfCfgAtmVpi INTEGER, wfAtmCESConfCfgAtmVci INTEGER, wfAtmCESConfVclCct INTEGER, wfAtmCESConfCbrService INTEGER, wfAtmCESConfCbrClockMode INTEGER, wfAtmCESConfCas INTEGER, wfAtmCESConfPartialFill INTEGER, wfAtmCESConfBufMaxSize INTEGER, wfAtmCESConfCdvRxT INTEGER, wfAtmCESConfCellLossIntegrationPeriod INTEGER, wfAtmCESConfConnType INTEGER, wfAtmCESConfLocalAddr OCTET STRING, wfAtmCESConfAdminStatus INTEGER, wfAtmCESConfOperStatus INTEGER } wfAtmCESConfDelete OBJECT-TYPE SYNTAX INTEGER { created(1), deleted(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Create/delete MIB instance parameter." DEFVAL { created } ::= { wfAtmCESConfEntry 1 } wfAtmCESConfDisable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/Disable MIB instance parameter." DEFVAL { enabled } ::= { wfAtmCESConfEntry 2 } wfAtmCESConfAtmIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is equal to the line number value of the ATM Port interface mapped through this CES IWF to a CBR interface." ::= { wfAtmCESConfEntry 3 } wfAtmCESConfCbrIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is equal to the line number value of the CBR interface, channel, or bundle that is being cross-connected to this ATM VCL." ::= { wfAtmCESConfEntry 4 } wfAtmCESConfAtmVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is equal to the VPI used by the ATM VCL mapped through this CES IWF to a CBR interface." ::= { wfAtmCESConfEntry 5 } wfAtmCESConfAtmVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is equal to the VCI used by the ATM VCL mapped through this CES IWF to a CBR interface." ::= { wfAtmCESConfEntry 6 } wfAtmCESConfCfgAtmVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is equal to the VPI used by the ATM VCL mapped through this CES IWF to a CBR interface. Setting this attribute when wfAtmCESConfConnType is set to activeSvc or passiveSvc has no effect." ::= { wfAtmCESConfEntry 7 } wfAtmCESConfCfgAtmVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is equal to the VCI used by the ATM VCL mapped through this CES IWF to a CBR interface. Setting this attribute when wfAtmCESConfConnType is set to activeSvc or passiveSvc has no effect." ::= { wfAtmCESConfEntry 8 } wfAtmCESConfVclCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the object which corresponds to the Wellfleet circuit number." ::= { wfAtmCESConfEntry 9 } wfAtmCESConfCbrService OBJECT-TYPE SYNTAX INTEGER { unstructured(1), structured(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Define if DSx/Ex service is structured or unstructured. A structured(2) interface is some nx64kbKbps. An unstructured (1) interface is 1.544Mbps, 2.048Mbps, 6.312Mbps, 44.736 Mbps, or 34.368 Mbps. unstructured(1) passes all bits through the ATM network. strucutured(2) passes data bits through the ATM network, and may also pass signalling bits. At this time, only unstructured mode is defined for the 44.736 Mbps and 34.368 Mbps services." DEFVAL { structured } ::= { wfAtmCESConfEntry 10 } wfAtmCESConfCbrClockMode OBJECT-TYPE SYNTAX INTEGER { synchronous(1), srts(2), adaptive(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Define if DSx/Ex service clocking mode. This maps into transmit clock source of CBR interface. For structured modes this value, if present, must be set to synchronous(1)." DEFVAL { synchronous } ::= { wfAtmCESConfEntry 11 } wfAtmCESConfCas OBJECT-TYPE SYNTAX INTEGER { basic(1), e1Cas(2), ds1SfCas(3), ds1EsfCas(4), j2Cas(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter selects which AAL1 Format should be used: Basic does not carry CAS bits, and uses a single 125 usec frame. e1Cas, ds1SfCas, dS1EsfCas and j2Cas carry CAS bits in a multiframe structure for E1, DS1 SF, DS1 ESF and J2 respectively. This applies to structured interfaces only. Default is basic (1). For unstructured interfaces this value, if present, must be set to the default of basic (1)." DEFVAL { basic } ::= { wfAtmCESConfEntry 12 } wfAtmCESConfPartialFill OBJECT-TYPE SYNTAX INTEGER (0 .. 47) ACCESS read-write STATUS mandatory DESCRIPTION "If partial cell fill is used, the number of user octets per cell must be set with this parameter. Setting this parameter to zero disables partial cell fill, and causes all cells to be completely filled before they are sent." DEFVAL { 0 } -- Partial Cell Fill not used ::= { wfAtmCESConfEntry 13 } wfAtmCESConfBufMaxSize OBJECT-TYPE SYNTAX INTEGER (1..65536) ACCESS read-write STATUS mandatory DESCRIPTION "Define maximum size in 10 microsecond increments of the reassembly buffer. Some implementations may want allow the maximum buffer size to be programmed to a size less than the physical limit to reduce the maximum delay through a circuit." DEFVAL { 128 } ::= { wfAtmCESConfEntry 14 } wfAtmCESConfCdvRxT OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum cell arrival jitter in 10 usec increments that the reassembly process will tolerate in the cell stream without producing errors on the CBR service interface." DEFVAL { 100 } ::= { wfAtmCESConfEntry 15 } wfAtmCESConfCellLossIntegrationPeriod OBJECT-TYPE SYNTAX INTEGER (1000 .. 65535) ACCESS read-write STATUS mandatory DESCRIPTION "The time in milliseconds for the cell loss integration period. If cells are continuously lost for this period of time, wfAtmCESCellLossStatus is set to loss (2). The default definition is 2500." DEFVAL { 2500 } ::= { wfAtmCESConfEntry 16 } wfAtmCESConfConnType OBJECT-TYPE SYNTAX INTEGER { other(1), pvc(2), activeSvc(3), passiveSvc(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The type of ATM connectivity between associated CES IWF's. Valid values are: other - none of the types specified below pvc - supporting connectivity is a permanent virtual connection activeSvc - attempt calls whenever none established passiveSvc - accept calls" DEFVAL { pvc } ::= { wfAtmCESConfEntry 17 } wfAtmCESConfLocalAddr OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The ATM address of the local CES IWF process. This address may be used by the automatic SVC establishment procedures to identify the intended recipient CES IWF of an incoming automatic SVC call request. Optionally, the MAX-ACCESS of this object may be read-only, for those implementations where it is not desired to manually configure this address." ::= { wfAtmCESConfEntry 18 } wfAtmCESConfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired administrative status of the CES interworking function. The up and down states indicate that the traffic flow is enabled or disabled respectively across the CES interworking function." DEFVAL { up } ::= { wfAtmCESConfEntry 19 } wfAtmCESConfOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The operational status of the CES interworking function. The up and down states indicate that the traffic flow is enabled or disabled respectively across the CES interworking function. The unknown state indicates that the state of the CES interworking function cannot be determined. The state will be down or unknown if the supporting CBR or ATM interfaces are down or unknown, respectively." ::= { wfAtmCESConfEntry 20 } -- CES Statistics Table wfAtmCESStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF WfAtmCESStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CES AAL1 statistical data table." ::= { wfAtmCESObjects 2 } wfAtmCESStatsEntry OBJECT-TYPE SYNTAX WfAtmCESStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the CES AAL1 Stats table. There is one entry in this table corresponding to each entry in the wfAtmCESConfTable." INDEX { wfAtmCESStatsAtmIndex, wfAtmCESStatsAtmVpi, wfAtmCESStatsAtmVci } ::= { wfAtmCESStatsTable 1 } WfAtmCESStatsEntry ::= SEQUENCE { wfAtmCESStatsAtmIndex INTEGER, wfAtmCESStatsAtmVpi INTEGER, wfAtmCESStatsAtmVci INTEGER, wfAtmCESStatsCbrIndex INTEGER, wfAtmCESStatsVclCct INTEGER, wfAtmCESStatsReassCells Counter, wfAtmCESStatsHdrErrors Counter, wfAtmCESStatsPointerReframes Counter, wfAtmCESStatsPointerParityErrors Counter, wfAtmCESStatsAal1SeqErrors Counter, wfAtmCESStatsLostCells Counter, wfAtmCESStatsMisinsertedCells Counter, wfAtmCESStatsBufUnderflows Counter, wfAtmCESStatsBufOverflows Counter, wfAtmCESStatsCellLossStatus INTEGER } wfAtmCESStatsAtmIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is equal to the line number value of the ATM Port interface mapped through this CES IWF to a CBR interface." ::= { wfAtmCESStatsEntry 1 } wfAtmCESStatsAtmVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is equal to the VPI used by the ATM VCL mapped through this CES IWF to a CBR interface." ::= { wfAtmCESStatsEntry 2 } wfAtmCESStatsAtmVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is equal to the VCI used by the ATM VCL mapped through this CES IWF to a CBR interface." ::= { wfAtmCESStatsEntry 3 } wfAtmCESStatsCbrIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is equal to the line number value of the CBR interface, channel, or bundle that is being cross-connected to this ATM VCL." ::= { wfAtmCESStatsEntry 4 } wfAtmCESStatsVclCct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the object which corresponds to the Wellfleet circuit number." ::= { wfAtmCESStatsEntry 5 } wfAtmCESStatsReassCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This count gives the number of cells played out to the CES Service Interface. It excludes cells that were discarded for any reason, including cells that were not used due to being declared misinserted, or discarded while the reassembler was waiting to achieve synchronization." ::= { wfAtmCESStatsEntry 6 } wfAtmCESStatsHdrErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The count of the number of AAL1 header errors detected, including those corrected. Header errors include correctable and uncorrectable CRC, plus bad parity." ::= { wfAtmCESStatsEntry 7 } wfAtmCESStatsPointerReframes OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This records the count of the number of events in which the AAL1 reassembler found that an SDT pointer is not where it is expected, and the pointer must be reacquired. This count is only meaningful for structured CES modes, as unstructured CES modes do not use pointers. For unstructured CES modes, this count, if present, should indicate zero." ::= { wfAtmCESStatsEntry 8 } wfAtmCESStatsPointerParityErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This records the count of the number of events in which the AAL1 reassembler detects a parity check failure at the point where a structured data pointer is expected. This count is only meaningful for structured CES modes, as unstructured CES modes do not use pointers. For unstructured CES modes, this count, if present, should indicate zero." ::= { wfAtmCESStatsEntry 9 } wfAtmCESStatsAal1SeqErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of times that the sequence number of an incoming AAL1 Type 1 SAR-PDU causes a transition from the 'sync' state to the 'out of sequence' state, as defined by ITU-T I.363.1." ::= { wfAtmCESStatsEntry 10 } wfAtmCESStatsLostCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of lost cells, as detected by the AAL1 sequence number processing, for example. This records the count of the number of cells detected as lost in the network prior to the destination CES IWF AAL1 layer processing." ::= { wfAtmCESStatsEntry 11 } wfAtmCESStatsMisinsertedCells OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of AAL1 sequence violations which the AAL Convergence sublayer interprets as a misinserted cell, as defined by ITU-T I.363.1." ::= { wfAtmCESStatsEntry 12 } wfAtmCESStatsBufUnderflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of buffer underflows. This records the count of the number of times the CES reassembly buffer underflows. In the case of a continuous underflow caused by a loss of ATM cell flow, a single buffer underflow should be counted. If the CES IWF is implemented with multiple buffers (such as a cell level buffer and a bit level buffer), then either buffer underflow will cause this count to be incremented." ::= { wfAtmCESStatsEntry 13 } wfAtmCESStatsBufOverflows OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of buffer overflows. This records the count of the number of times the CES reassembly buffer overflows. If the CES IWF is implemented with multiple buffers (such as a cell level buffer and a bit level buffer, then either buffer overflow will cause this count to be incremented " ::= { wfAtmCESStatsEntry 14 } wfAtmCESStatsCellLossStatus OBJECT-TYPE SYNTAX INTEGER { noLoss(1), loss(2) } ACCESS read-only STATUS mandatory DESCRIPTION "When cells are continuously lost for the number of milliseconds specified by wfAtmCESConfCellLossIntegrationPeriod, the value is set to loss (2). When cells are no longer lost, the value is set to noLoss (1)." ::= { wfAtmCESStatsEntry 15 } END