Wellfleet-AT-MIB

All MIBs › Wellfleet-AT-MIB

Category: Wellfleet BayNetworks Routing Protocols

Description: Monitors Wellfleet AppleTalk protocol parameters, routing tables, and zone information.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-AT-MIB?

Wellfleet-AT-MIB is a legacy Wellfleet Communications (later Bay Networks/Nortel, built on Wellfleet-COMMON-MIB) proprietary MIB configuring AppleTalk (and MacIP) on a per-slot basis. Its objects cover a create/delete/disable/state control, debug level, DDP queue length, homed port, total nets/zones/zone-names/AARP-entries, estimated nets/hosts, MacIP base create/delete/disable/state, MacIP zone, and up to several MacIP address ranges (lower/upper IP bounds). As a configuration/status MIB it lets an administrator confirm AppleTalk/MacIP slot configuration and estimated network size on a legacy Wellfleet (Bay Networks/Nortel) router. It is deployed on legacy Wellfleet Communications (Bay Networks/Nortel) routers (AppleTalk/MacIP). Engineers can download the Wellfleet-AT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-AT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Wellfleet Communications (Bay Networks/Nortel) routers (AppleTalk/MacIP)

Monitoring Examples

An administrator checks wfAppleBaseTotalZones and wfAppleMacIPZone to confirm AppleTalk/MacIP slot configuration on a legacy Wellfleet (Bay Networks/Nortel) router.

What Can Be Monitored

AppleTalk/MacIP slot configuration and estimated network size

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfAppletalkGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfAppleBase	1.3.6.1.4.1.18.3.5.4.1
INT wfAppleBaseDelete	1.3.6.1.4.1.18.3.5.4.1.1	INTEGER	read-write	Create/Delete parameter for determining whether or not AppleTalk is configured on this slot.
INT wfAppleBaseDisable	1.3.6.1.4.1.18.3.5.4.1.2	INTEGER	read-write	Enable/Disable parameter for determining whether or not to startup AppleTalk.
INT wfAppleBaseState	1.3.6.1.4.1.18.3.5.4.1.3	INTEGER	read-only	This parameter relfects the current state of AppleTalk.
INT wfAppleBaseDebugLevel	1.3.6.1.4.1.18.3.5.4.1.4	INTEGER	read-write	Appletalk has control of what debug and info messages are printed.
INT wfAppleBaseDdpQueLen	1.3.6.1.4.1.18.3.5.4.1.5	INTEGER	read-write	wfAppleBaseDdpQueLen is no longer used.
INT wfAppleBaseHomedPort	1.3.6.1.4.1.18.3.5.4.1.6	INTEGER	read-write	The circuit number of the port on which NBP will register this router.
INT wfAppleBaseTotalNets	1.3.6.1.4.1.18.3.5.4.1.7	INTEGER	read-only	The total number of networks from all routing protocols.
INT wfAppleBaseTotalZones	1.3.6.1.4.1.18.3.5.4.1.8	INTEGER	read-only	The total number of zone/rtmp associations. Also the total number of instances of zones in the mib.
INT wfAppleBaseTotalZoneNames	1.3.6.1.4.1.18.3.5.4.1.9	INTEGER	read-only	The total number of unique zone names.
INT wfAppleBaseTotalAarpEntries	1.3.6.1.4.1.18.3.5.4.1.10	INTEGER	read-only	The total number of AARP entries.
INT wfAppleBaseEstimatedNets	1.3.6.1.4.1.18.3.5.4.1.11	INTEGER	read-write	This parameter indicates the estimated number of networks that the router will need to keep in its routing table.
INT wfAppleBaseEstimatedHosts	1.3.6.1.4.1.18.3.5.4.1.12	INTEGER	read-write	This parameter indicates the estimated number of end stations that the router will need to keep in its AARP table. This should not include end stations that are reached through another router.
INT wfAppleMacIPBaseDelete	1.3.6.1.4.1.18.3.5.4.1.13	INTEGER	read-write	Create/Delete parameter for determining whether or not MacIP is configured on this box.
INT wfAppleMacIPBaseDisable	1.3.6.1.4.1.18.3.5.4.1.14	INTEGER	read-write	Enable/Disable parameter for determining whether or not to startup MacIP.
INT wfAppleMacIPBaseState	1.3.6.1.4.1.18.3.5.4.1.15	INTEGER	read-only	This parameter relfects the current state of MACIP.
STR wfAppleMacIPZone	1.3.6.1.4.1.18.3.5.4.1.16	DisplayString	read-write	The zone that this router is in. (For MacIP)
IP wfMacIPAddress1	1.3.6.1.4.1.18.3.5.4.1.17	IpAddress	read-write	The base IP address used for assignment of addresses
INT wfMacIPLowerIpAddress1	1.3.6.1.4.1.18.3.5.4.1.18	INTEGER	read-write	The base IP address used for assignment of addresses
INT wfMacIPUpperIpAddress1	1.3.6.1.4.1.18.3.5.4.1.19	INTEGER	read-write	The base IP address used for assignment of addresses
IP wfMacIPAddress2	1.3.6.1.4.1.18.3.5.4.1.20	IpAddress	read-write	The base IP address used for assignment of addresses
INT wfMacIPLowerIpAddress2	1.3.6.1.4.1.18.3.5.4.1.21	INTEGER	read-write	The base IP address used for assignment of addresses
INT wfMacIPUpperIpAddress2	1.3.6.1.4.1.18.3.5.4.1.22	INTEGER	read-write	The base IP address used for assignment of addresses
IP wfMacIPAddress3	1.3.6.1.4.1.18.3.5.4.1.23	IpAddress	read-write	The base IP address used for assignment of addresses
INT wfMacIPLowerIpAddress3	1.3.6.1.4.1.18.3.5.4.1.24	INTEGER	read-write	The base IP address used for assignment of addresses
INT wfMacIPUpperIpAddress3	1.3.6.1.4.1.18.3.5.4.1.25	INTEGER	read-write	The base IP address used for assignment of addresses
INT wfAppleMacIPAddressTimeOut	1.3.6.1.4.1.18.3.5.4.1.26	INTEGER	read-write	The base IP address used for assignment of addresses
INT wfAppleMacIPServerRequests	1.3.6.1.4.1.18.3.5.4.1.27	INTEGER	read-only	The Number of times this router has been asked if it is an MacIP Server
INT wfAppleMacIPServerResponces	1.3.6.1.4.1.18.3.5.4.1.28	INTEGER	read-only	The Number of times this router has responded to server requests.
wfAppleRtmpTable	1.3.6.1.4.1.18.3.5.4.2		not-accessible	The table of elements of AppleTalk's routing RTMP table
wfAppleRtmpEntry	1.3.6.1.4.1.18.3.5.4.2.1		not-accessible	An entry in the Routing table
INT wfAppleRtmpNetStart	1.3.6.1.4.1.18.3.5.4.2.1.1	INTEGER	read-only	The destinatination network range of this route to which this entry pertains. The route is considered the best route to that network. There wil only be one route to a single destination. The address will be in the form of [network min - network max].
INT wfAppleRtmpNetEnd	1.3.6.1.4.1.18.3.5.4.2.1.2	INTEGER	read-only	The network max in the destination network range to which the routing entry pertains.
INT wfAppleRtmpPort	1.3.6.1.4.1.18.3.5.4.2.1.3	INTEGER	read-only	The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
INT wfAppleRtmpHops	1.3.6.1.4.1.18.3.5.4.2.1.4	INTEGER	read-only	The routing metric to get to this destination network. The measurement is in terms of hops.
INT wfAppleRtmpNextHopNet	1.3.6.1.4.1.18.3.5.4.2.1.5	INTEGER	read-only	The AppleTalk net of the next hop router for this route.
INT wfAppleRtmpNextHopNode	1.3.6.1.4.1.18.3.5.4.2.1.6	INTEGER	read-only	The AppleTalk node of the next hop router for this route.
INT wfAppleRtmpState	1.3.6.1.4.1.18.3.5.4.2.1.7	INTEGER	read-only	The state of this routing entry: 1 = Good, 2 = Suspect, 3 = GoingBad, or 4 = Bad.
INT wfAppleRtmpProto	1.3.6.1.4.1.18.3.5.4.2.1.8	INTEGER	read-only	The protocol this routing entry was learned through: 1 = RTMP, 2 = AURP, 3 = Static Route.
IP wfAppleRtmpAurpNextHopIpAddress	1.3.6.1.4.1.18.3.5.4.2.1.9	IpAddress	read-only	The next hop address if this route was learned through AURP.
wfApplePortTable	1.3.6.1.4.1.18.3.5.4.3		not-accessible	The port descriptor table that describes the configuration parameters for this port of the AppleTalk Router.
wfApplePortEntry	1.3.6.1.4.1.18.3.5.4.3.1		not-accessible	An entry in the Port Descriptor table
INT wfApplePortDelete	1.3.6.1.4.1.18.3.5.4.3.1.1	INTEGER	read-write	Create/Delete parameter. Users perform an SNMP SET operation on this object to create/delete an AppleTalk interface. The default is create.
INT wfApplePortDisable	1.3.6.1.4.1.18.3.5.4.3.1.2	INTEGER	read-write	Enable/Disable parameter. Users perforn an SNMP SET operation on this object to enable/disable an AppleTalk interface. Default is enabled.
INT wfApplePortCircuit	1.3.6.1.4.1.18.3.5.4.3.1.3	INTEGER	read-only	The circuit number for this interface
INT wfApplePortState	1.3.6.1.4.1.18.3.5.4.3.1.4	INTEGER	read-only	The current state of the AppleTalk port.
INT wfApplePortType	1.3.6.1.4.1.18.3.5.4.3.1.5	INTEGER	read-write	wfApplePortType is reserved for future use
INT wfApplePortCksumDisable	1.3.6.1.4.1.18.3.5.4.3.1.6	INTEGER	read-write	Flag to enable/disable the calculation of the DDP checksum for packets sourced by the router over this interface. This value has no effect on incoming packets.
INT wfApplePortTrEndStation	1.3.6.1.4.1.18.3.5.4.3.1.7	INTEGER	read-write	When an interface is running token ring this attribute allows for end station source routing. If the interface is not running token ring the attribute has no meaning.
INT wfApplePortGniForever	1.3.6.1.4.1.18.3.5.4.3.1.8	INTEGER	read-write	wfApplePortGniForever is ignored. A non-seed interface will send GetNetInfos every 10 seconds until it gets a response.
INT wfApplePortAarpFlush	1.3.6.1.4.1.18.3.5.4.3.1.9	INTEGER	read-write	The maximum age (in minutes) of an aarp entry before it is deleted. Defaults to 12 hours. Minimum values is five minutes.
OCT wfApplePortMacAddress	1.3.6.1.4.1.18.3.5.4.3.1.10	OCTET STRING	read-write	Configured mac address
INT wfApplePortNodeId	1.3.6.1.4.1.18.3.5.4.3.1.11	INTEGER	read-write	The AppleTalk node id configured for this port/interface. If PortNodeId or PortNetwork is zero the interface will try to acquire an address dynamically.
INT wfApplePortNetwork	1.3.6.1.4.1.18.3.5.4.3.1.12	INTEGER	read-write	The AppleTalk network number configured for this port/interface. If PortNodeId or PortNetwork is zero the interface will try to acquire an address dynamically.
INT wfApplePortNetStart	1.3.6.1.4.1.18.3.5.4.3.1.13	INTEGER	read-write	The Network start value in the network range for this interface/port. If this is zero, the port is considered non-seed.
INT wfApplePortNetEnd	1.3.6.1.4.1.18.3.5.4.3.1.14	INTEGER	read-write	The Network end value in the network range for this interface/port.
STR wfApplePortDfltZone	1.3.6.1.4.1.18.3.5.4.3.1.15	DisplayString	read-write	The default zone name for this network range/ interface.
OCT wfApplePortCurMacAddress	1.3.6.1.4.1.18.3.5.4.3.1.16	OCTET STRING	read-only	Mac Address used
INT wfApplePortCurNodeId	1.3.6.1.4.1.18.3.5.4.3.1.17	INTEGER	read-only	The AppleTalk node id of this port
INT wfApplePortCurNetwork	1.3.6.1.4.1.18.3.5.4.3.1.18	INTEGER	read-only	The network number for this port.
INT wfApplePortCurNetStart	1.3.6.1.4.1.18.3.5.4.3.1.19	INTEGER	read-only	The Network start value in the network range for this port.
INT wfApplePortCurNetEnd	1.3.6.1.4.1.18.3.5.4.3.1.20	INTEGER	read-only	The Network end value in the network range for this port.
STR wfApplePortCurDfltZone	1.3.6.1.4.1.18.3.5.4.3.1.21	DisplayString	read-only	The default zone name for this port
CTR wfApplePortAarpProbeRxs	1.3.6.1.4.1.18.3.5.4.3.1.22	Counter	read-only	The number of AARP Probe packets received on this interface.
CTR wfApplePortAarpProbeTxs	1.3.6.1.4.1.18.3.5.4.3.1.23	Counter	read-only	The number of AARP Probe packets transmitted on this interface.
CTR wfApplePortAarpReqRxs	1.3.6.1.4.1.18.3.5.4.3.1.24	Counter	read-only	The number of AARP Request packets received on this interface.
CTR wfApplePortAarpReqTxs	1.3.6.1.4.1.18.3.5.4.3.1.25	Counter	read-only	The number of AARP Request packets transmitted on this interface.
CTR wfApplePortAarpRspRxs	1.3.6.1.4.1.18.3.5.4.3.1.26	Counter	read-only	The number of AARP Response packets received on this interface.
CTR wfApplePortAarpRspTxs	1.3.6.1.4.1.18.3.5.4.3.1.27	Counter	read-only	The number of AARP Response packets transmitted on this interface.
CTR wfApplePortDdpOutRequests	1.3.6.1.4.1.18.3.5.4.3.1.28	Counter	read-only	The total number of DDP datagrams which were supplied to DDP by local DDP clients in requests for transmission. Note that this counter does not include any datagrams counted in ddpForwRequests.
CTR wfApplePortDdpInReceives	1.3.6.1.4.1.18.3.5.4.3.1.29	Counter	read-only	The total number of input datagrams received by DDP, including those received in error.
CTR wfApplePortDdpInLocalDatagrams	1.3.6.1.4.1.18.3.5.4.3.1.30	Counter	read-only	The total number of input DDP datagrams for which this entity was their final DDP destination.
CTR wfApplePortDdpNoProtocolHandlers	1.3.6.1.4.1.18.3.5.4.3.1.31	Counter	read-only	The total number of DDP datagrams addressed to this entity that were addressed to an upper layer protocol for which no protocol handler existed.
CTR wfApplePortDdpTooShortErrors	1.3.6.1.4.1.18.3.5.4.3.1.32	Counter	read-only	The total number of input DDP datagrams dropped because the received data length was less than the data length specified in the DDP header or the received data length was less than the length of the expected DDP header.
CTR wfApplePortDdpTooLongErrors	1.3.6.1.4.1.18.3.5.4.3.1.33	Counter	read-only	The total number of input DDP datagrams dropped because the received data length was greater than the data length specified in the DDP header or because they exceeded the maximum DDP datagram size.
CTR wfApplePortDdpChecksumErrors	1.3.6.1.4.1.18.3.5.4.3.1.34	Counter	read-only	The total number of input DDP datagrams for which this DDP entity was their final destination, and which were dropped because of a checksum error.
CTR wfApplePortDdpForwRequests	1.3.6.1.4.1.18.3.5.4.3.1.35	Counter	read-only	The number of input datagrams for which this entity was not their final DDP destination, as a result of which an attempt was made to find a route to forward them to that final destination.
CTR wfApplePortDdpOutNoRoutes	1.3.6.1.4.1.18.3.5.4.3.1.36	Counter	read-only	The total number of DDP datagrams dropped because a route could not be found to their final destination.
CTR wfApplePortDdpBroadcastErrors	1.3.6.1.4.1.18.3.5.4.3.1.37	Counter	read-only	The total number of input DDP datagrams dropped because this entity was not their final destination and they were addressed to the link level broadcast.
CTR wfApplePortDdpHopCountErrors	1.3.6.1.4.1.18.3.5.4.3.1.38	Counter	read-only	The total number of input DDP datagrams dropped because this entity was not their final destination and their hop count would exceed 15.
CTR wfApplePortRtmpInDataPkts	1.3.6.1.4.1.18.3.5.4.3.1.39	Counter	read-only	A count of the number of good RTMP data packets received by this entity.
CTR wfApplePortRtmpOutDataPkts	1.3.6.1.4.1.18.3.5.4.3.1.40	Counter	read-only	A count of the number of RTMP packets sent by this entity.
CTR wfApplePortRtmpInRequestPkts	1.3.6.1.4.1.18.3.5.4.3.1.41	Counter	read-only	A count of the number of good RTMP Request packets received by this entity.
CTR wfApplePortRtmpNextIREqualChanges	1.3.6.1.4.1.18.3.5.4.3.1.42	Counter	read-only	A count of the number of times RTMP changes the Next Internet Router in a routing entry because the hop count advertised in a routing tuple was equal to the current hop count for a particular network.
CTR wfApplePortRtmpNextIRLessChanges	1.3.6.1.4.1.18.3.5.4.3.1.43	Counter	read-only	A count of the number of times RTMP changes the Next Internet Router in a routing entry because the hop count advertised in a routing tuple was less than the current hop count for a particular network.
CTR wfApplePortRtmpRouteDeletes	1.3.6.1.4.1.18.3.5.4.3.1.44	Counter	read-only	A count of the number of times RTMP deletes a route because it was aged out of the table. This can help to detect routing problems.
CTR wfApplePortRtmpNetworkMismatchErrors	1.3.6.1.4.1.18.3.5.4.3.1.45	Counter	read-only	The number of times RTMP receives a Data packet from a router who claims to be on a different network than that configured for the receiving port. This can help to detect configuration errors.
CTR wfApplePortRtmpRoutingTableOverflows	1.3.6.1.4.1.18.3.5.4.3.1.46	Counter	read-only	The number of times RTMP attempted to add a route to the RTMP table but failed due to overflow.
CTR wfApplePortZipInZipQueries	1.3.6.1.4.1.18.3.5.4.3.1.47	Counter	read-only	The number of ZIP Queries received by this entity.
CTR wfApplePortZipInZipReplies	1.3.6.1.4.1.18.3.5.4.3.1.48	Counter	read-only	The number of ZIP Replies received by this entity.
CTR wfApplePortZipOutZipReplies	1.3.6.1.4.1.18.3.5.4.3.1.49	Counter	read-only	The number of ZIP Replies sent by this entity.
CTR wfApplePortZipInZipExtendedReplies	1.3.6.1.4.1.18.3.5.4.3.1.50	Counter	read-only	The number of ZIP Extended Replies received by this entity.
CTR wfApplePortZipOutZipExtendedReplies	1.3.6.1.4.1.18.3.5.4.3.1.51	Counter	read-only	The number of ZIP Extended Replies sent by this entity.
CTR wfApplePortZipInGetZoneLists	1.3.6.1.4.1.18.3.5.4.3.1.52	Counter	read-only	The number of ZIP GetZoneList transactions received by this entity.
CTR wfApplePortZipOutGetZoneListReplies	1.3.6.1.4.1.18.3.5.4.3.1.53	Counter	read-only	The number of ZIP GetZoneListReply transactions sent by this entity.
CTR wfApplePortZipInGetLocalZones	1.3.6.1.4.1.18.3.5.4.3.1.54	Counter	read-only	The number of ZIP GetLocalZone transactions received by this entity.
CTR wfApplePortZipOutGetLocalZoneReplies	1.3.6.1.4.1.18.3.5.4.3.1.55	Counter	read-only	The number of ZIP GetLocalZoneReply transactions sent by this entity.
CTR wfApplePortZipInGetMyZones	1.3.6.1.4.1.18.3.5.4.3.1.56	Counter	read-only	The number of ZIP GetMyZone transactions received by this entity.
CTR wfApplePortZipOutGetMyZoneReplies	1.3.6.1.4.1.18.3.5.4.3.1.57	Counter	read-only	The number of ZIP GetMyZoneReply transactions sent by this entity.
CTR wfApplePortZipZoneConflictErrors	1.3.6.1.4.1.18.3.5.4.3.1.58	Counter	read-only	The number of times a conflict has been detected between this entity's zone information and another entity's zone information.
CTR wfApplePortZipInGetNetInfos	1.3.6.1.4.1.18.3.5.4.3.1.59	Counter	read-only	The number of ZIP GetNetInfo packets received on this port by this entity.
CTR wfApplePortZipOutGetNetInfoReplies	1.3.6.1.4.1.18.3.5.4.3.1.60	Counter	read-only	The number of ZIP GetNetInfoReply packets sent out this port by this entity.
CTR wfApplePortZipZoneOutInvalids	1.3.6.1.4.1.18.3.5.4.3.1.61	Counter	read-only	The number of times this entity has sent a ZIP GetNetInfo Reply with the zone invalid bit set in response to a GetNetInfo Request with an invalid zone name.
CTR wfApplePortZipAddressInvalids	1.3.6.1.4.1.18.3.5.4.3.1.62	Counter	read-only	The number of times this entity had to broadcast a ZIP GetNetInfo Reply because the GetNetInfo Request had an invalid address.
CTR wfApplePortZipOutGetNetInfos	1.3.6.1.4.1.18.3.5.4.3.1.63	Counter	read-only	The number of ZIP GetNetInfo packets sent out this port by this entity.
CTR wfApplePortZipInGetNetInfoReplies	1.3.6.1.4.1.18.3.5.4.3.1.64	Counter	read-only	The number of ZIP GetNetInfoReply packets received on this port by this entity.
CTR wfApplePortZipOutZipQueries	1.3.6.1.4.1.18.3.5.4.3.1.65	Counter	read-only	The number of ZIP Queries sent by this entity.
CTR wfApplePortZipInErrors	1.3.6.1.4.1.18.3.5.4.3.1.66	Counter	read-only	The number of ZIP packets received by this entity that were rejected for any error.
CTR wfApplePortNbpInLookUpRequests	1.3.6.1.4.1.18.3.5.4.3.1.67	Counter	read-only	The number of NBP LookUp Requests received.
CTR wfApplePortNbpInLookUpReplies	1.3.6.1.4.1.18.3.5.4.3.1.68	Counter	read-only	The number of NBP LookUp Replies received.
CTR wfApplePortNbpInBroadcastRequests	1.3.6.1.4.1.18.3.5.4.3.1.69	Counter	read-only	The number of NBP Broadcast Requests received.
CTR wfApplePortNbpInForwardRequests	1.3.6.1.4.1.18.3.5.4.3.1.70	Counter	read-only	The number of NBP Forward Requests received.
CTR wfApplePortNbpOutLookUpRequests	1.3.6.1.4.1.18.3.5.4.3.1.71	Counter	read-only	The number of NBP LookUp Requests sent.
CTR wfApplePortNbpOutLookUpReplies	1.3.6.1.4.1.18.3.5.4.3.1.72	Counter	read-only	The number of NBP LookUp Replies sent.
CTR wfApplePortNbpOutBroadcastRequests	1.3.6.1.4.1.18.3.5.4.3.1.73	Counter	read-only	The number of NBP Broadcast Requests sent.
CTR wfApplePortNbpOutForwardRequests	1.3.6.1.4.1.18.3.5.4.3.1.74	Counter	read-only	The number of NBP Forward Requests sent.
CTR wfApplePortNbpRegistrationFailures	1.3.6.1.4.1.18.3.5.4.3.1.75	Counter	read-only	The number of times this node experienced a failure in attempting to register an NBP entity.
CTR wfApplePortNbpInErrors	1.3.6.1.4.1.18.3.5.4.3.1.76	Counter	read-only	The number of NBP packets received by this entity that were rejected for any error.
CTR wfApplePortEchoRequests	1.3.6.1.4.1.18.3.5.4.3.1.77	Counter	read-only	The number of AppleTalk Echo requests received.
CTR wfApplePortEchoReplies	1.3.6.1.4.1.18.3.5.4.3.1.78	Counter	read-only	The number of AppleTalk Echo replies sent.
INT wfApplePortInterfaceCost	1.3.6.1.4.1.18.3.5.4.3.1.79	INTEGER	read-write	RTMP Cost for this interface.
OCT wfApplePortWanBroadcastAddress	1.3.6.1.4.1.18.3.5.4.3.1.80	OCTET STRING	read-write	Frame Relay, SMDS, or ATM broadcast address
INT wfApplePortWanSplitHorizonDisable	1.3.6.1.4.1.18.3.5.4.3.1.81	INTEGER	read-write	WAN (Frame Relay or ATM) split horizon enabled
INT wfApplePortZoneFilterType	1.3.6.1.4.1.18.3.5.4.3.1.82	INTEGER	read-write	Controls zone filtering on this interface. An allow indicates that any wfAppleZoneFilterEntry is a zone that is allowed on the interface. A deny indicates that any ZoneFilterEntry is a zone that should not be advertised out this interface. No ZoneFilterEntrys indicates that all nets and zones are being advertised.
INT wfApplePortMacIPDisable	1.3.6.1.4.1.18.3.5.4.3.1.83	INTEGER	read-write	Enable/Disable parameter for MacIP.
wfAppleLclZoneTable	1.3.6.1.4.1.18.3.5.4.4		not-accessible	The Local Zone table describes a list of zone names s serviced by a particular AppleTalk port/interface. In other words, the list of zone names that are associated with a particular network range.
wfAppleLclZoneEntry	1.3.6.1.4.1.18.3.5.4.4.1		not-accessible	An entry in the Local Zone table
INT wfAppleLclZoneDelete	1.3.6.1.4.1.18.3.5.4.4.1.1	INTEGER	read-write	Create/Delete parameter for adding/deleting a zone name to the Local Zone List for a particular AppleTalk network interface.
INT wfAppleLclZonePortCircuit	1.3.6.1.4.1.18.3.5.4.4.1.2	INTEGER	read-only	The circuit number for the corresponding AppleTalk interface /port for this zone list.
INT wfAppleLclZoneIndex	1.3.6.1.4.1.18.3.5.4.4.1.3	INTEGER	read-only	A unique value for this zone name.
STR wfAppleLclZoneName	1.3.6.1.4.1.18.3.5.4.4.1.4	DisplayString	read-write	One of the local zone names defined for this/ interface.
wfAppleAarpTable	1.3.6.1.4.1.18.3.5.4.5		not-accessible	The AppleTalk Address Translation table contains a mapping of AppleTalk Network addresses to its corresponding physical address.
wfAppleAarpEntry	1.3.6.1.4.1.18.3.5.4.5.1		not-accessible	An entry in the Address Mapping table
INT wfAppleAarpIfIndex	1.3.6.1.4.1.18.3.5.4.5.1.1	INTEGER	read-only	The unique value for this interface/cct. This value is the same interface as identified by the value of ifIndex.
INT wfAppleAarpNet	1.3.6.1.4.1.18.3.5.4.5.1.2	INTEGER	read-only	The host's AppleTalk address (Net.Nodeid). This address corresponds to the media-dependent 'physical' address for this host.
INT wfAppleAarpNode	1.3.6.1.4.1.18.3.5.4.5.1.3	INTEGER	read-only	The host's AppleTalk address (Net.Nodeid). This address corresponds to the media-dependent 'physical' address for this host.
OCT wfAppleAarpPhysAddress	1.3.6.1.4.1.18.3.5.4.5.1.4	OCTET STRING	read-only	The media-dependent 'physical' address.
wfAppleZipTable	1.3.6.1.4.1.18.3.5.4.6		not-accessible	The Zone Information table for reachable AppleTalk Networks.
wfAppleZipEntry	1.3.6.1.4.1.18.3.5.4.6.1		not-accessible	An entry in the Zone Information table
INT wfAppleZipZoneNetStart	1.3.6.1.4.1.18.3.5.4.6.1.1	INTEGER	read-only	The network that starts the range for this entry.
INT wfAppleZipZoneNetEnd	1.3.6.1.4.1.18.3.5.4.6.1.2	INTEGER	read-only	The network that ends the range for this entry.
INT wfAppleZipIndex	1.3.6.1.4.1.18.3.5.4.6.1.3	INTEGER	read-only	The unique value for this zone name.
STR wfAppleZipZoneName	1.3.6.1.4.1.18.3.5.4.6.1.4	DisplayString	read-only	The ASCII xone name of this entry.
INT wfAppleZipZoneState	1.3.6.1.4.1.18.3.5.4.6.1.5	INTEGER	read-only	The state of the ZIP entry.
wfAppleZoneFilterTable	1.3.6.1.4.1.18.3.5.4.7		not-accessible	The zone filter table describes a list of zone names filtered on a given AppleTalk port/interface.
wfAppleZoneFilterEntry	1.3.6.1.4.1.18.3.5.4.7.1		not-accessible	An entry in the Zone Filter table
INT wfAppleZoneFilterDelete	1.3.6.1.4.1.18.3.5.4.7.1.1	INTEGER	read-write	Create/Delete parameter for adding/deleting a zone name to the filter list for a particular AppleTalk network interface.
INT wfAppleZoneFilterCircuit	1.3.6.1.4.1.18.3.5.4.7.1.2	INTEGER	read-write	The circuit number for the corresponding AppleTalk interface for filtered zone entry. This is only valid if wfAppleZoneFilterCircuitType is RTMP
IP wfAppleZoneFilterIpAddress	1.3.6.1.4.1.18.3.5.4.7.1.3	IpAddress	read-write	The IP address for the corresponding AURP interface for filtered zone entry. This is only valid if wfAppleZoneFilterCircuitType is AURP.
INT wfAppleZoneFilterCircuitType	1.3.6.1.4.1.18.3.5.4.7.1.4	INTEGER	read-write	The type of the circuit the filter is applied on. If RTMP, then wfAppleZoneFilterCircuit is used. If AURP, then wfAppleZoneFilterIpAddress is used.
INT wfAppleZoneFilterIndex	1.3.6.1.4.1.18.3.5.4.7.1.5	INTEGER	read-only	A unique value for this filtered zone name.
STR wfAppleZoneFilterName	1.3.6.1.4.1.18.3.5.4.7.1.6	DisplayString	read-write	One of the zone names filtered on this/ interface.
wfAppleAurpBase	1.3.6.1.4.1.18.3.5.4.8
INT wfAppleAurpBaseDelete	1.3.6.1.4.1.18.3.5.4.8.1	INTEGER	read-write	Create/Delete parameter for determining whether or not AURP is configured on this box.
INT wfAppleAurpBaseDisable	1.3.6.1.4.1.18.3.5.4.8.2	INTEGER	read-write	Enable/Disable parameter for determining whether or not to startup AURP.
INT wfAppleAurpBaseState	1.3.6.1.4.1.18.3.5.4.8.3	INTEGER	read-only	This parameter relfects the current state of AURP.
OCT wfAppleAurpBaseDomain	1.3.6.1.4.1.18.3.5.4.8.4	OCTET STRING	read-write	The domain identfier for the domain that this router resides in.
IP wfAppleAurpBaseIpAddress	1.3.6.1.4.1.18.3.5.4.8.5	IpAddress	read-write	The IP address configured on this router that AURP should use for all of its connections
INT wfAppleAurpBasePromiscuous	1.3.6.1.4.1.18.3.5.4.8.6	INTEGER	read-write	AURP Promiscuous mode not supported.
CTR wfAppleAurpBaseInAcceptedOpenReqs	1.3.6.1.4.1.18.3.5.4.8.7	Counter	read-only	The number of Open Requests that were accepted.
CTR wfAppleAurpBaseInRejectedOpenReqs	1.3.6.1.4.1.18.3.5.4.8.8	Counter	read-only	The number of Open Requests that were rejected.
CTR wfAppleAurpBaseInRouterDowns	1.3.6.1.4.1.18.3.5.4.8.9	Counter	read-only	The number of Router Down packets that were received.
CTR wfAppleAurpBaseInPktsNoPeers	1.3.6.1.4.1.18.3.5.4.8.10	Counter	read-only	The number of packets received from UDP for which there is no valid connection.
CTR wfAppleAurpBaseInInvalidVerions	1.3.6.1.4.1.18.3.5.4.8.11	Counter	read-only	The number of invalid version error received on this tunnel.
wfAppleAurpTable	1.3.6.1.4.1.18.3.5.4.9		not-accessible	Each AURP connection has an entry in this table
wfAppleAurpEntry	1.3.6.1.4.1.18.3.5.4.9.1		not-accessible	An entry in the AURP connection table.
INT wfAppleAurpEntryDelete	1.3.6.1.4.1.18.3.5.4.9.1.1	INTEGER	read-write	Create/Delete para1meter. Users perform an SNMP SET operation on this object to create/delete an AppleTalk AURP interface. The default is create.
INT wfAppleAurpEntryDisable	1.3.6.1.4.1.18.3.5.4.9.1.2	INTEGER	read-write	Enable/Disable parameter. Users perforn an SNMP SET operation on this object to enable/disable an AppleTalk AURP interface. Default is enabled.
INT wfAppleAurpEntryState	1.3.6.1.4.1.18.3.5.4.9.1.3	INTEGER	read-only	The current state of the Aurp Entry.
IP wfAppleAurpEntryIpAddress	1.3.6.1.4.1.18.3.5.4.9.1.4	IpAddress	read-only	Ip address of the remote AURP router with which the connection will be made
INT wfAppleAurpEntryZoneFilterType	1.3.6.1.4.1.18.3.5.4.9.1.5	INTEGER	read-write	controls zone filtering on this interface. An allow indicates that any wfAppleZoneFilterEntry is a zone that is allowed on the interface. A deny indicates that any ZoneFilterEntry is a zone that should not be advertised out this interface. No ZoneFilterEntrys indicates that all nets and zones are being advertised.
INT wfAppleAurpEntryTimeoutCommand	1.3.6.1.4.1.18.3.5.4.9.1.6	INTEGER	read-write	The amout of time in seconds to wait for an ack before retrying a command.
INT wfAppleAurpEntryRetryCommand	1.3.6.1.4.1.18.3.5.4.9.1.7	INTEGER	read-write	The number of attempts at a command before determining that the peer is no longer responding.
INT wfAppleAurpEntryUpdateRate	1.3.6.1.4.1.18.3.5.4.9.1.8	INTEGER	read-write	The rate at which routing table updates are sent on this connection, in seconds. This value should be a multiple of ten.
INT wfAppleAurpEntryLhfTimeout	1.3.6.1.4.1.18.3.5.4.9.1.9	INTEGER	read-write	The number of seconds to wait for an RI-Rsp, RI-Upd, or ZI-Rsp before sending a tickle request, in seconds. This value should be a multiple of ten.
INT wfAppleAurpEntryHopCountReduction	1.3.6.1.4.1.18.3.5.4.9.1.10	INTEGER	read-write	Enable/Disable for hop count reduction on this connection.
INT wfAppleAurpEntryInterfaceCost	1.3.6.1.4.1.18.3.5.4.9.1.11	INTEGER	read-write	Additional cost to add to hop count as advertised in RI-Rsp and RI-Upd.
INT wfAppleAurpEntrySuiFlags	1.3.6.1.4.1.18.3.5.4.9.1.12	INTEGER	read-write	The Send Update Information flags. This value matches the 16 bit field sent in OReq and RI-Req packets. The bits are broken down as follows: 0x4000 = Net Add 0x2000 = Net Delete/Net Route Change 0x1000 = Net Distance Change 0x0800 = Zone Change These should be 'OR'ed together for desired updates. e.g. for all updates 0x4000 \| 0x2000 \| 0x1000 \| 0x8000 = 0x7800 = 30720
INT wfAppleAurpEntryType	1.3.6.1.4.1.18.3.5.4.9.1.13	INTEGER	read-write	Reserved for future use
IP wfAppleAurpEntryPeerDomainId	1.3.6.1.4.1.18.3.5.4.9.1.14	IpAddress	read-only	The peer's Domain Indicator.
INT wfAppleAurpEntryPeerUpdateRate	1.3.6.1.4.1.18.3.5.4.9.1.15	INTEGER	read-only	The update interval specified by the peer in its Open Response, in tens of seconds.
INT wfAppleAurpEntryPeerEnvironment	1.3.6.1.4.1.18.3.5.4.9.1.16	INTEGER	read-only	The Environment flags found in the peer's Open Response
INT wfAppleAurpEntryPeerSuiFlags	1.3.6.1.4.1.18.3.5.4.9.1.17	INTEGER	read-only	The Send Update Information flags found in the peer's Open Request and RI Request.
INT wfAppleAurpEntryCliConnId	1.3.6.1.4.1.18.3.5.4.9.1.18	INTEGER	read-only	This connection's client connection ID.
INT wfAppleAurpEntrySrvConnId	1.3.6.1.4.1.18.3.5.4.9.1.19	INTEGER	read-only	This connection's server connection ID.
INT wfAppleAurpEntryCliSeqNum	1.3.6.1.4.1.18.3.5.4.9.1.20	INTEGER	read-only	This connection's client sequence number.
INT wfAppleAurpEntrySrvSeqNum	1.3.6.1.4.1.18.3.5.4.9.1.21	INTEGER	read-only	This connection's server sequence number.
CTR wfAppleAurpEntryCommandRetries	1.3.6.1.4.1.18.3.5.4.9.1.22	Counter	read-only	The number of commands that were retried.
CTR wfAppleAurpEntryInDelayedDuplicates	1.3.6.1.4.1.18.3.5.4.9.1.23	Counter	read-only	The number of AURP packets that were received whose sequence number was one less than that expected.
CTR wfAppleAurpEntryInInvalidConnIds	1.3.6.1.4.1.18.3.5.4.9.1.24	Counter	read-only	The number of packets received with bad connection IDs.
CTR wfAppleAurpEntryInInvalidCommands	1.3.6.1.4.1.18.3.5.4.9.1.25	Counter	read-only	The number of AURP packets received that had an illegal value in the command field.
CTR wfAppleAurpEntryInInvalidSubCodes	1.3.6.1.4.1.18.3.5.4.9.1.26	Counter	read-only	The number of AURP Zone packets received that had an illegal value in the sub command field.
CTR wfAppleAurpEntryInPkts	1.3.6.1.4.1.18.3.5.4.9.1.27	Counter	read-only	The total number of packets received on this connection.
CTR wfAppleAurpEntryOutPkts	1.3.6.1.4.1.18.3.5.4.9.1.28	Counter	read-only	The total number of packets transmitted on this connection.
CTR wfAppleAurpEntryInDdpPkts	1.3.6.1.4.1.18.3.5.4.9.1.29	Counter	read-only	The number of data packets received.
CTR wfAppleAurpEntryOutDdpPkts	1.3.6.1.4.1.18.3.5.4.9.1.30	Counter	read-only	The number of data packets transmitted.
CTR wfAppleAurpEntryOutNoRoutes	1.3.6.1.4.1.18.3.5.4.9.1.31	Counter	read-only	The number of DDP packets dropped because a route could not be found to their final destination.
CTR wfAppleAurpEntryHopCountErrors	1.3.6.1.4.1.18.3.5.4.9.1.32	Counter	read-only	The total number of input DDP datagrams dropped because their hop count would exceed 15.
CTR wfAppleAurpEntryHopCountAdjustments	1.3.6.1.4.1.18.3.5.4.9.1.33	Counter	read-only	The total number of input DDP datagrams that had their hop count adjusted (if hop count reduction is enabled).
CTR wfAppleAurpEntryInAurpPkts	1.3.6.1.4.1.18.3.5.4.9.1.34	Counter	read-only	The number of routing packets received
CTR wfAppleAurpEntryOutAurpPkts	1.3.6.1.4.1.18.3.5.4.9.1.35	Counter	read-only	The number of routing packets transmitted.
CTR wfAppleAurpEntryInOpenRequests	1.3.6.1.4.1.18.3.5.4.9.1.36	Counter	read-only	The number of Open Requests received.
CTR wfAppleAurpEntryOutOpenRequests	1.3.6.1.4.1.18.3.5.4.9.1.37	Counter	read-only	The number of Open Requests transmitted.
CTR wfAppleAurpEntryInOpenResponses	1.3.6.1.4.1.18.3.5.4.9.1.38	Counter	read-only	The number of Open Responses received.
CTR wfAppleAurpEntryOutOpenResponses	1.3.6.1.4.1.18.3.5.4.9.1.39	Counter	read-only	The number of Open Responses transmitted.
CTR wfAppleAurpEntryInRiRequests	1.3.6.1.4.1.18.3.5.4.9.1.40	Counter	read-only	The number of Routing Information Requests received.
CTR wfAppleAurpEntryOutRiRequests	1.3.6.1.4.1.18.3.5.4.9.1.41	Counter	read-only	The number of Routing Information Requests transmitted.
CTR wfAppleAurpEntryInRiResponses	1.3.6.1.4.1.18.3.5.4.9.1.42	Counter	read-only	The number of Routing Information Responses received.
CTR wfAppleAurpEntryOutRiResponses	1.3.6.1.4.1.18.3.5.4.9.1.43	Counter	read-only	The number of Routing Information Responses transmitted.
CTR wfAppleAurpEntryInRiAcks	1.3.6.1.4.1.18.3.5.4.9.1.44	Counter	read-only	The number of Routing Information Acknowledgements received.
CTR wfAppleAurpEntryOutRiAcks	1.3.6.1.4.1.18.3.5.4.9.1.45	Counter	read-only	The number of Routing Information Acknowledgements transmitted.
CTR wfAppleAurpEntryInRiUpdates	1.3.6.1.4.1.18.3.5.4.9.1.46	Counter	read-only	The number of Routing Information Updates received.
CTR wfAppleAurpEntryOutRiUpdates	1.3.6.1.4.1.18.3.5.4.9.1.47	Counter	read-only	The number of Routing Information Updates transmitted.
CTR wfAppleAurpEntryInUpdateNullEvents	1.3.6.1.4.1.18.3.5.4.9.1.48	Counter	read-only	The number of Null update events received.
CTR wfAppleAurpEntryOutUpdateNullEvents	1.3.6.1.4.1.18.3.5.4.9.1.49	Counter	read-only	The number of update events transmitted.
CTR wfAppleAurpEntryInUpdateNetAdds	1.3.6.1.4.1.18.3.5.4.9.1.50	Counter	read-only	The number of Net Added update events received.
CTR wfAppleAurpEntryOutUpdateNetAdds	1.3.6.1.4.1.18.3.5.4.9.1.51	Counter	read-only	The number of Net Added update events transmitted.
CTR wfAppleAurpEntryInUpdateNetDeletes	1.3.6.1.4.1.18.3.5.4.9.1.52	Counter	read-only	The number of Net Deleted update events received.
CTR wfAppleAurpEntryOutUpdateNetDeletes	1.3.6.1.4.1.18.3.5.4.9.1.53	Counter	read-only	The number of Net Deleted update events transmitted.
CTR wfAppleAurpEntryInUpdateNetRouteChanges	1.3.6.1.4.1.18.3.5.4.9.1.54	Counter	read-only	The number of Net Route Change update events received.
CTR wfAppleAurpEntryOutUpdateNetRouteChanges	1.3.6.1.4.1.18.3.5.4.9.1.55	Counter	read-only	The number of Net Route Change update events transmitted.
CTR wfAppleAurpEntryInUpdateNetDistanceChanges	1.3.6.1.4.1.18.3.5.4.9.1.56	Counter	read-only	The number of Net Distance Change update events received.
CTR wfAppleAurpEntryOutUpdateNetDistanceChanges	1.3.6.1.4.1.18.3.5.4.9.1.57	Counter	read-only	The number of Net Distance Change update events transmitted.
CTR wfAppleAurpEntryInUpdateZoneChanges	1.3.6.1.4.1.18.3.5.4.9.1.58	Counter	read-only	The number of Zone Change update events received.
CTR wfAppleAurpEntryOutUpdateZoneChanges	1.3.6.1.4.1.18.3.5.4.9.1.59	Counter	read-only	The number of Zone Change update events transmitted.
CTR wfAppleAurpEntryInUpdateInvalidEvents	1.3.6.1.4.1.18.3.5.4.9.1.60	Counter	read-only	The number of invalid update events received.
CTR wfAppleAurpEntryOutUpdateInvalidEvents	1.3.6.1.4.1.18.3.5.4.9.1.61	Counter	read-only	The number of invalid update events transmitted.
CTR wfAppleAurpEntryInZiRequests	1.3.6.1.4.1.18.3.5.4.9.1.62	Counter	read-only	The number of Zone Information requests received. (This doesn't include RI-Acks with the SZI flag set).
CTR wfAppleAurpEntryOutZiRequests	1.3.6.1.4.1.18.3.5.4.9.1.63	Counter	read-only	The number of Zone Information requests transmitted.
CTR wfAppleAurpEntryInZiResponses	1.3.6.1.4.1.18.3.5.4.9.1.64	Counter	read-only	The number of Zone Information responses received.
CTR wfAppleAurpEntryOutZiResponses	1.3.6.1.4.1.18.3.5.4.9.1.65	Counter	read-only	The number of Zone Information responses transmitted.
CTR wfAppleAurpEntryInGdzlRequests	1.3.6.1.4.1.18.3.5.4.9.1.66	Counter	read-only	The number of Get Domain Zone List requests received.
CTR wfAppleAurpEntryOutGdzlRequests	1.3.6.1.4.1.18.3.5.4.9.1.67	Counter	read-only	The number of Get Domain Zone List requests transmitted.
CTR wfAppleAurpEntryInGdzlResponses	1.3.6.1.4.1.18.3.5.4.9.1.68	Counter	read-only	The number of Get Domain Zone List responses received.
CTR wfAppleAurpEntryOutGdzlResponses	1.3.6.1.4.1.18.3.5.4.9.1.69	Counter	read-only	The number of Get Domain Zone List responses transmitted.
CTR wfAppleAurpEntryInGznRequests	1.3.6.1.4.1.18.3.5.4.9.1.70	Counter	read-only	The number of Get Zone Nets requests received.
CTR wfAppleAurpEntryOutGznRequests	1.3.6.1.4.1.18.3.5.4.9.1.71	Counter	read-only	The number of Get Zone Nets requests transmitted.
CTR wfAppleAurpEntryInGznResponses	1.3.6.1.4.1.18.3.5.4.9.1.72	Counter	read-only	The number of Get Zone Nets responses received.
CTR wfAppleAurpEntryOutGznResponses	1.3.6.1.4.1.18.3.5.4.9.1.73	Counter	read-only	The number of Get Zone Nets responses transmitted.
CTR wfAppleAurpEntryInTickles	1.3.6.1.4.1.18.3.5.4.9.1.74	Counter	read-only	The number of Tickle Requests received.
CTR wfAppleAurpEntryOutTickles	1.3.6.1.4.1.18.3.5.4.9.1.75	Counter	read-only	The number of Tickle Requests transmitted.
CTR wfAppleAurpEntryInTickleAcks	1.3.6.1.4.1.18.3.5.4.9.1.76	Counter	read-only	The number of Tickle Acknowledgements received.
CTR wfAppleAurpEntryOutTickleAcks	1.3.6.1.4.1.18.3.5.4.9.1.77	Counter	read-only	The number of Tickle Acknowledgements transmitted.
CTR wfAppleAurpEntryInRouterDowns	1.3.6.1.4.1.18.3.5.4.9.1.78	Counter	read-only	The number of Router Down notifications received.
CTR wfAppleAurpEntryOutRouterDowns	1.3.6.1.4.1.18.3.5.4.9.1.79	Counter	read-only	The number of Router Down notifications transmitted.
STR wfAppleAurpEntryZoneFiltDfltZone	1.3.6.1.4.1.18.3.5.4.9.1.80	DisplayString	read-write	The default zone to give to networks that have all of their real zones filtered (by PARTDENY or PARTALLOW zone filtering) out this connection.
wfAppleAggrStats	1.3.6.1.4.1.18.3.5.4.10
CTR wfAppleAggrInPkts	1.3.6.1.4.1.18.3.5.4.10.1	Counter	read-only	The total number of datagrams received
CTR wfAppleAggrOutPkts	1.3.6.1.4.1.18.3.5.4.10.2	Counter	read-only	The total number of datagrams sent (includes datagrams forwarded)
CTR wfAppleAggrFwdDatagrams	1.3.6.1.4.1.18.3.5.4.10.3	Counter	read-only	The total number of datagrams forwarded
CTR wfAppleAggrInXsumErrs	1.3.6.1.4.1.18.3.5.4.10.4	Counter	read-only	The total number of datagrams destined for a local entity that were dropped because of a checksum error.
CTR wfAppleAggrInHopCountErrs	1.3.6.1.4.1.18.3.5.4.10.5	Counter	read-only	The total number of datagrams that could not be forwarded because they would exceed the hop-count limit(15).
CTR wfAppleAggrInTooShorts	1.3.6.1.4.1.18.3.5.4.10.6	Counter	read-only	The total number of input DDP datagrams dropped because the received data length was less than the data length specified in the DDP header or the received data length was less than the length of the expected DDP header.
CTR wfAppleAggrInTooLongs	1.3.6.1.4.1.18.3.5.4.10.7	Counter	read-only	The total number of input DDP datagrams dropped because the received data length was greater than the data length specified in the DDP header or because they exceeded the maximum DDP datagram size.
CTR wfAppleAggrOutNoRoutes	1.3.6.1.4.1.18.3.5.4.10.8	Counter	read-only	The total number of datagrams queued for transmission thet were discarded because the destination was unreachable.
CTR wfAppleAggrInLocalDests	1.3.6.1.4.1.18.3.5.4.10.9	Counter	read-only	The total number of datagrams destined for a local entity (not forwarded).
CTR wfAppleAggrInRtmps	1.3.6.1.4.1.18.3.5.4.10.10	Counter	read-only	The total number of RTMP packets received
CTR wfAppleAggrOutRtmps	1.3.6.1.4.1.18.3.5.4.10.11	Counter	read-only	The total number of RTMP packets sent

RFC description

Manages AppleTalk protocol configuration and status on Wellfleet router slots.

Start monitoring Legacy Wellfleet Communications (Bay Networks/Nortel) routers, AppleTalk/MacIP (per-slot AppleTalk zone/net status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-AT-MIB

What Is Wellfleet-AT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description