All MIBs › WYSE-MIB
Category: Legacy and Miscellaneous
Description: Manages Wyse thin client terminal configuration, session status, and remote desktop connectivity monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is WYSE-MIB?
WYSE-MIB is a Wyse Technology proprietary MIB (enterprise OID 714) reporting hardware inventory on Wyse thin-client terminals (WBT — Winterm Based Terminal — 3 series). Its objects cover RAM/ROM/PC-Card counts and per-slot tables (type, size, and for PC-Cards, vendor), an attached-I/O-device flag, keyboard language, character-repeat delay/rate, energy-saver mode, screen timeout, and touch-screen presence. As a hardware-inventory MIB it lets an administrator confirm a thin client's installed memory and PC-Card configuration during a fleet audit. It is deployed on Wyse Technology WBT3-series thin-client terminals. Engineers can download the WYSE-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in WYSE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Wyse Technology WBT3-series thin-client terminals
Monitoring Examples
An administrator checks wbt3RamSize and wbt3PCCardType across a fleet of Wyse thin clients to confirm hardware consistency before a firmware rollout.
What Can Be Monitored
- installed RAM/ROM/PC-Card hardware inventory
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| enterprises |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| wyse | 1.3.6.1.4.1.714 | |||
| product | 1.3.6.1.4.1.714.1 | |||
| old | 1.3.6.1.4.1.714.1.1 | |||
| wysenet | 1.3.6.1.4.1.714.1.1.1 | |||
| thinClient | 1.3.6.1.4.1.714.1.2 | |||
| wbt3 | 1.3.6.1.4.1.714.1.2.3 | |||
| NTF wbt3TrapDHCPBuildMismatch | 1.3.6.1.4.1.714.1.2.3.0.1 | Firmware build number mismatch according to information supplied by DHCP server. | ||
| NTF wbt3TrapDHCPUpdDone | 1.3.6.1.4.1.714.1.2.3.0.2 | Firmware upgrade initiated due to build number mismatch according to DHCP information is done. | ||
| NTF wbt3TrapDHCPUpdNotComplete | 1.3.6.1.4.1.714.1.2.3.0.3 | Firmware upgrade initiated due to build number mismatch according to DHCP information is not completed for some reason. | ||
| NTF wbt3TrapSNMPAccptLd | 1.3.6.1.4.1.714.1.2.3.0.4 | Ready to accept up/download request initiated by SNMP manager. | ||
| NTF wbt3TrapSNMPLdDone | 1.3.6.1.4.1.714.1.2.3.0.5 | SNMP initiated up/download request is done. | ||
| NTF wbt3TrapSNMPLdNotComplete | 1.3.6.1.4.1.714.1.2.3.0.6 | SNMP initiated up/download request is not completed for some reason. | ||
| NTF wbt3TrapRebootNotComplete | 1.3.6.1.4.1.714.1.2.3.0.7 | SNMP initiated reboot request is not completed for some reason. | ||
| wbt3Memory | 1.3.6.1.4.1.714.1.2.3.1 | |||
| wbt3Ram | 1.3.6.1.4.1.714.1.2.3.1.1 | |||
| INT wbt3RamNum | 1.3.6.1.4.1.714.1.2.3.1.1.1 | INTEGER | read-only | The number of Ram presents in this system |
| wbt3RamTable | 1.3.6.1.4.1.714.1.2.3.1.1.2 | not-accessible | A list of Ram entries, number of entries is given by the value of wbt3RamNum | |
| wbt3RamEntry | 1.3.6.1.4.1.714.1.2.3.1.1.2.1 | not-accessible | A Ram entity present in this system | |
| INT wbt3RamIndex | 1.3.6.1.4.1.714.1.2.3.1.1.2.1.1 | INTEGER | read-only | A unique value for each Ram entity present in this system. Its value ranges between 1 and the value of wbt3RamNum |
| INT wbt3RamType | 1.3.6.1.4.1.714.1.2.3.1.1.2.1.2 | INTEGER | read-only | The type of Ram Currently defined numbers are: base(1) video(2) extend(3) |
| INT wbt3RamSize | 1.3.6.1.4.1.714.1.2.3.1.1.2.1.3 | INTEGER | read-only | Total size of this ram entity in bytes |
| wbt3Rom | 1.3.6.1.4.1.714.1.2.3.1.2 | |||
| INT wbt3RomNum | 1.3.6.1.4.1.714.1.2.3.1.2.1 | INTEGER | read-only | The number of Rom entity presents in this system |
| wbt3RomTable | 1.3.6.1.4.1.714.1.2.3.1.2.2 | not-accessible | A list of Rom entries, number of entries is given by the value of wbt3RomNum | |
| wbt3RomEntry | 1.3.6.1.4.1.714.1.2.3.1.2.2.1 | not-accessible | A Rom entity present in this system | |
| INT wbt3RomIndex | 1.3.6.1.4.1.714.1.2.3.1.2.2.1.1 | INTEGER | read-only | A unique value for each Rom entity present in this system. Its value ranges between 1 and the value of wbt3RomNum |
| INT wbt3RomType | 1.3.6.1.4.1.714.1.2.3.1.2.2.1.2 | INTEGER | read-only | The type of Rom Currently defined numbers are: boot(1) os(2) option(3) |
| INT wbt3RomSize | 1.3.6.1.4.1.714.1.2.3.1.2.2.1.3 | INTEGER | read-only | Total size of this Rom entity in bytes |
| wbt3PCCard | 1.3.6.1.4.1.714.1.2.3.2 | |||
| INT wbt3PCCardNum | 1.3.6.1.4.1.714.1.2.3.2.1 | INTEGER | read-only | The number of PCCard slots presents in this system |
| wbt3PCCardTable | 1.3.6.1.4.1.714.1.2.3.2.2 | not-accessible | A list of PCCard entries, number of entries is given by the value of wbt3PCCardNum | |
| wbt3PCCardEntry | 1.3.6.1.4.1.714.1.2.3.2.2.1 | not-accessible | A PCCard slot present in this system | |
| INT wbt3PCCardIndex | 1.3.6.1.4.1.714.1.2.3.2.2.1.1 | INTEGER | read-only | A unique value for each PCCard slot present in this system. Its value ranges between 1 and the value of wbt3PCCardNum |
| INT wbt3PCCardType | 1.3.6.1.4.1.714.1.2.3.2.2.1.2 | INTEGER | read-only | The type of PCCard card currently plugged in this PCCard slot. Currently defined numbers are: empty(65535), -- the PCCard slot is empty multifunction(0), -- a multi function PCCard card is currently in the PCCard slot memory(1), modem(2), parallel-port(3), fixed-disk(4), video-adaptor(5), lan-adapter(6), AIMS(7) |
| STR wbt3PCCardVendor | 1.3.6.1.4.1.714.1.2.3.2.2.1.3 | DisplayString | read-only | A textual description of the vendor of the PCCard card currently plugged in this slot. e.g. 'Eicon DIVA PC Card' |
| wbt3IODevice | 1.3.6.1.4.1.714.1.2.3.3 | |||
| INT wbt3IODevAttached | 1.3.6.1.4.1.714.1.2.3.3.1 | INTEGER | read-only | A 32bit value which indicates the input devices currently attached to the unit. bit 0 - set if keyboard attached bit 1 - set if mouse driver loaded bit 2 - set if micro touch screen attached bit 3 - set if elo touch screen attached bit 4 - set if lightpen attached bit 5 - set if floppy drive attached |
| INT wbt3kbLanguage | 1.3.6.1.4.1.714.1.2.3.3.2 | INTEGER | read-write | The language setting for the keyboard attached to this terminal |
| INT wbt3CharacterRepeatDelay | 1.3.6.1.4.1.714.1.2.3.3.3 | INTEGER | read-write | Indicates the delay time between each character. |
| INT wbt3CharacterRepeatRate | 1.3.6.1.4.1.714.1.2.3.3.4 | INTEGER | read-write | Indicates repeat rate between each character in the range of 0 to 31 at 1 interval. |
| wbt3Display | 1.3.6.1.4.1.714.1.2.3.4 | |||
| wbt3DispCharacteristic | 1.3.6.1.4.1.714.1.2.3.4.1 | |||
| INT wbt3DispFreq | 1.3.6.1.4.1.714.1.2.3.4.1.1 | INTEGER | read-write | A 8bit value which indicates the current display frequency in Hz. Available display frequency values for Leo: 60/75/85 Hz, for Mars: 60/75 Hz. wbt3DispFreq can not be set if use DDC is on. |
| INT wbt3DispHorizPix | 1.3.6.1.4.1.714.1.2.3.4.1.2 | INTEGER | read-write | A 16bit value which indicates the current number of horizontal pixels. Available display horizontal pixel values for Leo: 640/800/1024/1280 (1280 only with 60 Hz) pixels, for Mars: 640/800/1024. wbt3DispHorizPix can not be set if use DDC is on. |
| INT wbt3DispVertPix | 1.3.6.1.4.1.714.1.2.3.4.1.3 | INTEGER | read-write | A 16bit value which indicates the current number of vertical pixels. Available display vertical pixel values for Leo: 480/600/768/1024 (1024 only with 60 Hz) pixels, for Mars: 480/600/768. wbt3DispVertPix can not be set if use DDC is on. |
| INT wbt3DispColor | 1.3.6.1.4.1.714.1.2.3.4.1.4 | INTEGER | read-only | Current display color depth |
| INT wbt3DispUseDDC | 1.3.6.1.4.1.714.1.2.3.4.1.5 | INTEGER | read-write | Automatic select the best available resolution and refresh rate. If selected Yes, the wbt3DispHorizPix, wbt3VertPix and wbt3DispFreq options can not be set. Use DDC is not available for Mars platform. |
| wbt3DispCapability | 1.3.6.1.4.1.714.1.2.3.4.2 | |||
| INT wbt3DispFreqMax | 1.3.6.1.4.1.714.1.2.3.4.2.1 | INTEGER | read-only | A 8bit value which indicates the display frequency in Hz for maximum resolution |
| INT wbt3DispHorizPixMax | 1.3.6.1.4.1.714.1.2.3.4.2.2 | INTEGER | read-only | A 16bit value which indicates the maximum number of horizontal pixels |
| INT wbt3DispVertPixMax | 1.3.6.1.4.1.714.1.2.3.4.2.3 | INTEGER | read-only | A 16bit value which indicates the maximum number of vertical pixels |
| INT wbt3DispColorMax | 1.3.6.1.4.1.714.1.2.3.4.2.4 | INTEGER | read-only | Maximum display color depth |
| INT wbt3EnergySaver | 1.3.6.1.4.1.714.1.2.3.4.3 | INTEGER | read-write | Indicates which energy saver is in use. |
| INT wbt3ScreenTimeOut | 1.3.6.1.4.1.714.1.2.3.4.4 | INTEGER | read-write | Indicates the time (in minutes) of non-activity to trigger the screen saver. |
| INT wbt3TouchScreen | 1.3.6.1.4.1.714.1.2.3.4.5 | INTEGER | read-write | If the terminal has a touch screen, indicates to which port it is attached |
| wbt3DhcpInfo | 1.3.6.1.4.1.714.1.2.3.5 | |||
| INT wbt3DhcpInfoNum | 1.3.6.1.4.1.714.1.2.3.5.1 | INTEGER | read-only | The number of entries in DHCP information table, this number equals to the number of currently initialized network interfaces (exclude loopback) in the terminal |
| wbt3DhcpInfoTable | 1.3.6.1.4.1.714.1.2.3.5.2 | not-accessible | A list of DHCP information table entry, Each entry lists the information obtained from DHCP server through a specific network interface in the terminal. The number of entries is given by the value of wbt3DhcpInfoNum | |
| wbt3DhcpInfoEntry | 1.3.6.1.4.1.714.1.2.3.5.2.1 | not-accessible | An interface with a DHCP information table entry on this system | |
| INT wbt3DhcpInfoIndex | 1.3.6.1.4.1.714.1.2.3.5.2.1.1 | INTEGER | read-only | A unique value for this DHCP information table, Its value ranges between 1 and the value of wbt3DhcpInfoNum. |
| INT wbt3InterfaceNum | 1.3.6.1.4.1.714.1.2.3.5.2.1.2 | INTEGER | read-only | The interface number through which the dhcp info is obtained |
| STR wbt3ServerIP | 1.3.6.1.4.1.714.1.2.3.5.2.1.3 | DisplayString | read-only | WinFrame/WTS Server IP address, (Option 155) |
| STR wbt3Domain | 1.3.6.1.4.1.714.1.2.3.5.2.1.5 | DisplayString | read-only | Domain to authenticate account defined by wbt3Username, (Option 157) |
| STR wbt3CommandLine | 1.3.6.1.4.1.714.1.2.3.5.2.1.7 | DisplayString | read-only | Application to use when connecting to a WinFrame/WTS Server, (Option 159) |
| STR wbt3WorkingDir | 1.3.6.1.4.1.714.1.2.3.5.2.1.8 | DisplayString | read-only | Working Directory for application defined by wbt3CommandLine, (Option 160) |
| STR wbt3FileServer | 1.3.6.1.4.1.714.1.2.3.5.2.1.9 | DisplayString | read-only | File server where ROM images are located, (Option 161) |
| STR wbt3FileRootPath | 1.3.6.1.4.1.714.1.2.3.5.2.1.10 | DisplayString | read-only | Absolute path name for ROM image parent directory, (Option 162) |
| STR wbt3TrapServerList | 1.3.6.1.4.1.714.1.2.3.5.2.1.11 | DisplayString | read-only | A list of host IPs which should receive SNMP trap from the terminal (Option 163) |
| INT wbt3SetCommunity | 1.3.6.1.4.1.714.1.2.3.5.2.1.12 | INTEGER | read-only | SNMP Set Community (Option 164): 0 - dhcp supplied set community is ignored, local configuration takes precedence; 1 - provided by DHCP server and being used; 2 - not provided by DHCP server, default set community is used |
| STR wbt3RDPstartApp | 1.3.6.1.4.1.714.1.2.3.5.2.1.13 | DisplayString | read-only | RDP option: Startup Application (Default Option 165) |
| STR wbt3EmulationMode | 1.3.6.1.4.1.714.1.2.3.5.2.1.14 | DisplayString | read-only | Terminal Emulation option: Emulation Mode (Default Option 166) |
| STR wbt3TerminalID | 1.3.6.1.4.1.714.1.2.3.5.2.1.15 | DisplayString | read-only | Terminal Emulation option: Terminal ID (Default Option 167) |
| STR wbt3VirtualPortServer | 1.3.6.1.4.1.714.1.2.3.5.2.1.16 | DisplayString | read-only | Virtual Port option: Virtual Port Server (Default Option 168) |
| wbt3DHCPoptionIDs | 1.3.6.1.4.1.714.1.2.3.5.3 | |||
| INT remoteServer | 1.3.6.1.4.1.714.1.2.3.5.3.1 | INTEGER | read-write | Common option: Remote Server (Default Option 155) |
| INT logonUserName | 1.3.6.1.4.1.714.1.2.3.5.3.2 | INTEGER | read-write | Common option: Logon User Name (Default Option 156) |
| INT domain | 1.3.6.1.4.1.714.1.2.3.5.3.3 | INTEGER | read-write | Common option: Domain (Default Option 157) |
| INT password | 1.3.6.1.4.1.714.1.2.3.5.3.4 | INTEGER | read-write | Common option: Login Password (Default Option 158) |
| INT commandLine | 1.3.6.1.4.1.714.1.2.3.5.3.5 | INTEGER | read-write | Common option: Command Line (Default Option 159) |
| INT workingDirectory | 1.3.6.1.4.1.714.1.2.3.5.3.6 | INTEGER | read-write | Common option: Working Directory (Default Option 160) |
| INT rDPStartupApp | 1.3.6.1.4.1.714.1.2.3.5.3.7 | INTEGER | read-write | RDP option: Startup Application (Default Option 165) |
| INT fTPFileServer | 1.3.6.1.4.1.714.1.2.3.5.3.8 | INTEGER | read-write | FTP option: File Server (Default Option 161) |
| INT fTPRootPath | 1.3.6.1.4.1.714.1.2.3.5.3.9 | INTEGER | read-write | FTP option: File Root Path (Default Option 162) |
| INT trapServerList | 1.3.6.1.4.1.714.1.2.3.5.3.10 | INTEGER | read-write | SNMP option: Trap Server IP List (Default Option 163) |
| INT setCommunity | 1.3.6.1.4.1.714.1.2.3.5.3.11 | INTEGER | read-write | SNMP option: Set Community (Default Option 164) |
| INT emulationMode | 1.3.6.1.4.1.714.1.2.3.5.3.12 | INTEGER | read-write | Terminal Emulation option: Emulation Mode (Default Option 166) |
| INT terminalID | 1.3.6.1.4.1.714.1.2.3.5.3.13 | INTEGER | read-write | Terminal Emulation option: Terminal ID (Default Option 167) |
| INT virtualPortServer | 1.3.6.1.4.1.714.1.2.3.5.3.14 | INTEGER | read-write | Virtual Port option: Virtual Port Server (Default Option 168) |
| wbt3BuildInfo | 1.3.6.1.4.1.714.1.2.3.6 | |||
| wbt3CurrentInfo | 1.3.6.1.4.1.714.1.2.3.6.1 | |||
| INT wbt3CurInfoNum | 1.3.6.1.4.1.714.1.2.3.6.1.1 | INTEGER | read-only | Number of rom images reside in the terminal currently, include main & application |
| wbt3CurInfoTable | 1.3.6.1.4.1.714.1.2.3.6.1.2 | not-accessible | A table of build info for each rom image, number of entries is given by the value of wbt3CurInfoNum | |
| wbt3CurInfoEntry | 1.3.6.1.4.1.714.1.2.3.6.1.2.1 | not-accessible | A rom image present in this terminal | |
| INT wbt3CurInfoIndex | 1.3.6.1.4.1.714.1.2.3.6.1.2.1.1 | INTEGER | read-only | A unique value for this rom image. Its value ranges between 1 and the value of wbt3CurInfoNum.. |
| STR wbt3CurBuildNum | 1.3.6.1.4.1.714.1.2.3.6.1.2.1.2 | DisplayString | read-only | Build number of a rom image currently on the terminal |
| STR wbt3CurOEMBuildNum | 1.3.6.1.4.1.714.1.2.3.6.1.2.1.3 | DisplayString | read-only | Build number of flash ROM image currently on the terminal for OEM |
| STR wbt3CurModBuildDate | 1.3.6.1.4.1.714.1.2.3.6.1.2.1.4 | DisplayString | read-only | Date that ROM image currently on the terminal was created |
| STR wbt3CurOEM | 1.3.6.1.4.1.714.1.2.3.6.1.2.1.5 | DisplayString | read-only | Name of OEM who's ROM image is defined by wbt3OEMBuildNum |
| STR wbt3CurHWPlatform | 1.3.6.1.4.1.714.1.2.3.6.1.2.1.6 | DisplayString | read-only | OS installed on the terminal |
| STR wbt3CurOS | 1.3.6.1.4.1.714.1.2.3.6.1.2.1.7 | DisplayString | read-only | OS installed on the terminal |
| wbt3DhcpUpdateInfo | 1.3.6.1.4.1.714.1.2.3.6.2 | |||
| INT wbt3DUpInfoNum | 1.3.6.1.4.1.714.1.2.3.6.2.1 | INTEGER | read-only | Number of rom images reside in the terminal currently, include main & application |
| wbt3DUpInfoTable | 1.3.6.1.4.1.714.1.2.3.6.2.2 | not-accessible | A table of build info for each rom image, number of entries is given by the value of wbt3DUpInfoNum | |
| wbt3DUpInfoEntry | 1.3.6.1.4.1.714.1.2.3.6.2.2.1 | not-accessible | A rom image present in this terminal | |
| INT wbt3DUpInfoIndex | 1.3.6.1.4.1.714.1.2.3.6.2.2.1.1 | INTEGER | read-only | A unique value for this rom image. Its value ranges between 1 and the value of wbt3DUpInfoNum.. |
| STR wbt3DUpBuildNum | 1.3.6.1.4.1.714.1.2.3.6.2.2.1.2 | DisplayString | read-only | Build number of the updated ROM image |
| STR wbt3DUpOEMBuildNum | 1.3.6.1.4.1.714.1.2.3.6.2.2.1.3 | DisplayString | read-only | Build number of the updated ROM image for OEM |
| STR wbt3DUpModBuildDate | 1.3.6.1.4.1.714.1.2.3.6.2.2.1.4 | DisplayString | read-only | Date that update image was last modified |
| STR wbt3DUpOEMBuildDate | 1.3.6.1.4.1.714.1.2.3.6.2.2.1.5 | DisplayString | read-only | Date that update image was last modified for OEM |
| wbt3CustomFields | 1.3.6.1.4.1.714.1.2.3.7 | |||
| STR wbt3CustomField1 | 1.3.6.1.4.1.714.1.2.3.7.1 | DisplayString | read-write | First custom field |
| STR wbt3CustomField2 | 1.3.6.1.4.1.714.1.2.3.7.2 | DisplayString | read-write | Second custom field |
| STR wbt3CustomField3 | 1.3.6.1.4.1.714.1.2.3.7.3 | DisplayString | read-write | Third custom field |
| wbt3Administration | 1.3.6.1.4.1.714.1.2.3.8 | |||
| wbt3UpDnLoad | 1.3.6.1.4.1.714.1.2.3.8.1 | |||
| INT wbt3UpDnLoadNum | 1.3.6.1.4.1.714.1.2.3.8.1.1 | INTEGER | read-write | The number of entries in the Up/Download table, Maximum value is 5 |
| wbt3UpDnLoadTable | 1.3.6.1.4.1.714.1.2.3.8.1.2 | not-accessible | A list of files to be upload or download | |
| wbt3UpDnLoadEntry | 1.3.6.1.4.1.714.1.2.3.8.1.2.1 | not-accessible | An upload or download request entry from server | |
| INT wbt3UpDnLoadIndex | 1.3.6.1.4.1.714.1.2.3.8.1.2.1.1 | INTEGER | read-write | A unique value for the request entry. Its value ranges between 1 and the value of wbt3UpDnLoadNum. |
| STR wbt3UpDnLoadId | 1.3.6.1.4.1.714.1.2.3.8.1.2.1.2 | DisplayString | read-write | An id number for this up/download request. This number is used to match with WBT private trap which will be sent to the server upon done with this up/download request. |
| INT wbt3UpDnLoadOp | 1.3.6.1.4.1.714.1.2.3.8.1.2.1.3 | INTEGER | read-write | 0=an upload request;1=a download request |
| STR wbt3UpDnLoadSrcFile | 1.3.6.1.4.1.714.1.2.3.8.1.2.1.4 | DisplayString | read-write | The path and file name for source file to be up/downloaded. |
| STR wbt3UpDnLoadDstFile | 1.3.6.1.4.1.714.1.2.3.8.1.2.1.5 | DisplayString | read-write | The path and file name where the up/downloaded file will be stored. |
| INT wbt3UpDnLoadFileType | 1.3.6.1.4.1.714.1.2.3.8.1.2.1.6 | INTEGER | read-write | 0=binary;1=ascii |
| INT wbt3UpDnLoadProtocol | 1.3.6.1.4.1.714.1.2.3.8.1.2.1.7 | INTEGER | read-write | 0=ftp, 1=tftp |
| STR wbt3UpDnLoadFServer | 1.3.6.1.4.1.714.1.2.3.8.1.2.1.8 | DisplayString | read-write | The file server IP address (or name) to/from which the file is up/downloaded. |
| INT wbt3UpDnLoadTimeFlag | 1.3.6.1.4.1.714.1.2.3.8.1.2.1.9 | INTEGER | read-write | 0=execute request immediately |
| INT wbt3AcceptReq | 1.3.6.1.4.1.714.1.2.3.8.1.3 | INTEGER | read-write | Indicate whether thinClient is ready to accept SNMP up/down load request |
| INT wbt3SubmitLoadJob | 1.3.6.1.4.1.714.1.2.3.8.1.4 | INTEGER | read-write | Setting this object to Ready(1) will kick off the up/download process specified in wbt3UpDnLoadTable |
| wbt3Action | 1.3.6.1.4.1.714.1.2.3.8.2 | |||
| INT wbt3RebootRequest | 1.3.6.1.4.1.714.1.2.3.8.2.1 | INTEGER | read-write | Set this object to RebootNow to kick off a reboot on the thinclient |
| INT wbt3ResetToFactoryDefault | 1.3.6.1.4.1.714.1.2.3.8.2.2 | INTEGER | read-write | Reset the terminal to factory-default settings. The terminal will be reboot after ResetNow is set. |
| wbt3FTPsetting | 1.3.6.1.4.1.714.1.2.3.8.3 | |||
| STR wbt3ServerName | 1.3.6.1.4.1.714.1.2.3.8.3.1 | DisplayString | read-write | File server name or IP address where the ROM images are located. |
| STR wbt3Directory | 1.3.6.1.4.1.714.1.2.3.8.3.2 | DisplayString | read-write | Directory where the ROM images are located. |
| STR wbt3UserID | 1.3.6.1.4.1.714.1.2.3.8.3.3 | DisplayString | read-write | User identification to login to the file server. |
| STR wbt3Password2 | 1.3.6.1.4.1.714.1.2.3.8.3.4 | DisplayString | read-write | User password to login to the file server. |
| INT wbt3SavePassword | 1.3.6.1.4.1.714.1.2.3.8.3.5 | INTEGER | read-write | Yes = to save the password permanently, No = do not save the password. |
| INT wbt3InfoLocation | 1.3.6.1.4.1.714.1.2.3.8.3.6 | INTEGER | read-write | UseDHCPinfo = ServerName and Directory will be provided by DHCP server, UseLocalinfo = ServerName and Directory will be provided using local settings. |
| INT wbt3SNMPupdate | 1.3.6.1.4.1.714.1.2.3.8.4 | INTEGER | read-write | Terminal firmware upgrade using SNMP. Yes = SNMP update enable, No = SNMP update disable. |
| INT wbt3DHCPupdate | 1.3.6.1.4.1.714.1.2.3.8.5 | INTEGER | read-write | Terminal firmware upgrade using DHCP. Yes = DHCP automatic update enable, No = DHCP automatic update disable. |
| wbt3Security | 1.3.6.1.4.1.714.1.2.3.8.7 | |||
| INT wbt3SecurityEnable | 1.3.6.1.4.1.714.1.2.3.8.7.1 | INTEGER | read-write | This group box is used to enable terminal security and connection configuration access. selecting enable terminal security, and deactivate the Hide Configure Tab function. By default this function is disabled |
| INT wbt3HideConfigTab | 1.3.6.1.4.1.714.1.2.3.8.7.2 | INTEGER | read-write | This function hides the Configure tab in the Winterm Connections Manager. By default this function is not activated. |
| INT wbt3FailOverEnable | 1.3.6.1.4.1.714.1.2.3.8.7.3 | INTEGER | read-write | Failover is a connection feature that is enabled using the Security properties sheet. Disabling this function activates the PingBeforeConnect function. By default this function is enabled. |
| INT wbt3MultipleConnect | 1.3.6.1.4.1.714.1.2.3.8.7.4 | INTEGER | read-write | Allow multiple connections. Select Yes to enable. By default this function is disabled. |
| INT wbt3PingBeforeConnect | 1.3.6.1.4.1.714.1.2.3.8.7.5 | INTEGER | read-write | Select Yes to enable. By default this function is deactivated. When FailOver is checked, PingBeforeConnect is grayed out, since it is implied that Ping is always performed before a connection is made. |
| INT wbt3Verbose | 1.3.6.1.4.1.714.1.2.3.8.7.6 | INTEGER | read-write | Select Yes to enable the Verbose connection function. By default the box is disabled. During the FailOver operation, user can see the status via a log window by checking the Verbose checkbox. The log window will show everything from first connection onward. |
| INT wbt3AutoLoginEnable | 1.3.6.1.4.1.714.1.2.3.8.7.7 | INTEGER | read-write | The AutoLogin function is an automatic login function that does not use a dialog box as a prompt to log you back into your terminal. Whether you restart or log off, the AutoLogin dialog box displays, counts five seconds, then returns you to the Winterm Connections Manager. |
| STR wbt3AutoLoginUserName | 1.3.6.1.4.1.714.1.2.3.8.7.8 | DisplayString | read-write | This field is activated by enabling AutoLogin Enable. By default the field is blank. |
| INT wbt3SingleButtonConnect | 1.3.6.1.4.1.714.1.2.3.8.7.9 | INTEGER | read-write | Select Yes to enable the function. By default the function is not activated. |
| INT wbt3AutoFailRecovery | 1.3.6.1.4.1.714.1.2.3.8.7.10 | INTEGER | read-write | Select Yes to enable the function. By default the function is activated. |
| wbt3TrapsInfo | 1.3.6.1.4.1.714.1.2.3.9 | |||
| INT wbt3TrapStatus | 1.3.6.1.4.1.714.1.2.3.9.1 | INTEGER | read-only | Current trap status information. |
| STR wbt3TrapReqId | 1.3.6.1.4.1.714.1.2.3.9.2 | DisplayString | read-only | The SNMP up/down load request Id associated with current trap |
| wbt3TrapServers | 1.3.6.1.4.1.714.1.2.3.9.3 | |||
| STR wbt3TrapServer1 | 1.3.6.1.4.1.714.1.2.3.9.3.1 | DisplayString | read-write | Server name or IP address where the trap messages will be sent. |
| STR wbt3TrapServer2 | 1.3.6.1.4.1.714.1.2.3.9.3.2 | DisplayString | read-write | Server name or IP address where the trap messages will be sent. |
| STR wbt3TrapServer3 | 1.3.6.1.4.1.714.1.2.3.9.3.3 | DisplayString | read-write | Server name or IP address where the trap messages will be sent. |
| STR wbt3TrapServer4 | 1.3.6.1.4.1.714.1.2.3.9.3.4 | DisplayString | read-write | Server name or IP address where the trap messages will be sent. |
| wbt3MibRev | 1.3.6.1.4.1.714.1.2.3.10 | |||
| INT wbt3MibRevMajor | 1.3.6.1.4.1.714.1.2.3.10.1 | INTEGER | read-only | The major revision level of the MIB The number for current version. |
| INT wbt3MibRevMinor | 1.3.6.1.4.1.714.1.2.3.10.2 | INTEGER | read-only | The minor revision level of the MIB The number for current version is 8. |
| wbt3Network | 1.3.6.1.4.1.714.1.2.3.11 | |||
| INT wbt3NetworkNum | 1.3.6.1.4.1.714.1.2.3.11.1 | INTEGER | read-only | The number of entries in the Network table. |
| wbt3NetworkTable | 1.3.6.1.4.1.714.1.2.3.11.2 | not-accessible | A table of network configuration, number of entries is given by the value of wbt3NetworkNum. | |
| wbt3NetworkEntry | 1.3.6.1.4.1.714.1.2.3.11.2.1 | not-accessible | A Network configuration presents in this terminal. | |
| INT wbt3NetworkIndex | 1.3.6.1.4.1.714.1.2.3.11.2.1.1 | INTEGER | read-only | A unique value for the request entry. Its value ranges between 1 and the value of wbt3NetworkIndex. |
| INT wbt3dhcpEnable | 1.3.6.1.4.1.714.1.2.3.11.2.1.2 | INTEGER | read-write | Indicates whether the terminal acquires its network parameters through DHCP or uses the static parameters provided. |
| STR wbt3NetworkAddress | 1.3.6.1.4.1.714.1.2.3.11.2.1.3 | DisplayString | read-write | IP address persents in this terminal. |
| STR wbt3SubnetMask | 1.3.6.1.4.1.714.1.2.3.11.2.1.4 | DisplayString | read-write | Subnet Mask presents in this terminal. |
| STR wbt3Gateway | 1.3.6.1.4.1.714.1.2.3.11.2.1.5 | DisplayString | read-write | Default gateway IP address. |
| INT wbt3dnsEnable | 1.3.6.1.4.1.714.1.2.3.11.2.1.6 | INTEGER | read-write | Indicates whether the terminal uses DNS to translate names to IP addresses. |
| STR wbt3defaultDomain | 1.3.6.1.4.1.714.1.2.3.11.2.1.7 | DisplayString | read-write | Indicates the domain in which the terminal belongs. |
| STR wbt3primaryDNSserverIPaddress | 1.3.6.1.4.1.714.1.2.3.11.2.1.8 | DisplayString | read-write | The IP address of the primary name server. |
| STR wbt3secondaryDNSserverIPaddress | 1.3.6.1.4.1.714.1.2.3.11.2.1.9 | DisplayString | read-write | The IP address of the secondary name server. |
| INT wbt3winsEnable | 1.3.6.1.4.1.714.1.2.3.11.2.1.10 | INTEGER | read-write | Indicates whether the terminal uses WINS to resolve to IP addresses. |
| STR wbt3primaryWINSserverIPaddress | 1.3.6.1.4.1.714.1.2.3.11.2.1.11 | DisplayString | read-write | The IP address of the primary name server. |
| STR wbt3secondaryWINSserverIPaddress | 1.3.6.1.4.1.714.1.2.3.11.2.1.12 | DisplayString | read-write | The IP address of the secondary name server. |
| INT wbt3NetworkSpeed | 1.3.6.1.4.1.714.1.2.3.11.2.1.17 | INTEGER | read-write | Indicates the Network speed connection.(Not available for Mars) |
| INT wbt3NetworkProtocol | 1.3.6.1.4.1.714.1.2.3.11.2.1.20 | INTEGER | read-only | Indicates network protocol used. |
| wbt3Apps | 1.3.6.1.4.1.714.1.2.3.12 | |||
| INT wbt3RDPencryption | 1.3.6.1.4.1.714.1.2.3.12.1 | INTEGER | read-write | To enable/disable the RPD encryption. |
| STR wbt3VirtualPortServerIPaddress | 1.3.6.1.4.1.714.1.2.3.12.2 | DisplayString | read-write | Specify the virtual port server address. |
| INT wbt3com1Share | 1.3.6.1.4.1.714.1.2.3.12.3 | INTEGER | read-write | To enable/disable COM1 share. |
| INT wbt3com2Share | 1.3.6.1.4.1.714.1.2.3.12.4 | INTEGER | read-write | To enable/disable COM2 share. |
| INT wbt3parallelShare | 1.3.6.1.4.1.714.1.2.3.12.5 | INTEGER | read-write | To enable/disable parallel share port. |
| iCADefaultHotkeys | 1.3.6.1.4.1.714.1.2.3.12.6 | not-accessible | ICA Client Default HotKeys settings. | |
| defaultHotkeysEntry | 1.3.6.1.4.1.714.1.2.3.12.6.1 | not-accessible | Default HotKeys entry. | |
| INT iCAStatusDialog | 1.3.6.1.4.1.714.1.2.3.12.6.1.1 | INTEGER | read-write | ICAStatusDialog |
| INT iCAStatusDialog2 | 1.3.6.1.4.1.714.1.2.3.12.6.1.2 | INTEGER | read-write | ICAStatusDialog |
| INT iCACloseRemoteApplication | 1.3.6.1.4.1.714.1.2.3.12.6.1.3 | INTEGER | read-write | ICAStatusDialog |
| INT iCACloseRemoteApplication2 | 1.3.6.1.4.1.714.1.2.3.12.6.1.4 | INTEGER | read-write | ICAStatusDialog |
| INT iCAtoggleTitleBar | 1.3.6.1.4.1.714.1.2.3.12.6.1.5 | INTEGER | read-write | ICAStatusDialog |
| INT iCAtoggleTitleBar2 | 1.3.6.1.4.1.714.1.2.3.12.6.1.6 | INTEGER | read-write | ICAStatusDialog |
| INT iCActrlAltDel | 1.3.6.1.4.1.714.1.2.3.12.6.1.7 | INTEGER | read-write | ICAStatusDialog |
| INT iCActrlAltDel2 | 1.3.6.1.4.1.714.1.2.3.12.6.1.8 | INTEGER | read-write | ICAStatusDialog |
| INT iCActrlEsc | 1.3.6.1.4.1.714.1.2.3.12.6.1.9 | INTEGER | read-write | ICAStatusDialog |
| INT iCActrlEsc2 | 1.3.6.1.4.1.714.1.2.3.12.6.1.10 | INTEGER | read-write | ICAStatusDialog |
| INT iCAaltEsc | 1.3.6.1.4.1.714.1.2.3.12.6.1.11 | INTEGER | read-write | ICAStatusDialog |
| INT iCAaltEsc2 | 1.3.6.1.4.1.714.1.2.3.12.6.1.12 | INTEGER | read-write | ICAStatusDialog |
| INT iCAaltTab | 1.3.6.1.4.1.714.1.2.3.12.6.1.13 | INTEGER | read-write | ICAStatusDialog |
| INT iCAaltTab2 | 1.3.6.1.4.1.714.1.2.3.12.6.1.14 | INTEGER | read-write | ICAStatusDialog |
| INT iCAaltBackTab | 1.3.6.1.4.1.714.1.2.3.12.6.1.15 | INTEGER | read-write | ICAStatusDialog |
| INT iCAaltBackTab2 | 1.3.6.1.4.1.714.1.2.3.12.6.1.16 | INTEGER | read-write | ICAStatusDialog |
| wbt3Connections | 1.3.6.1.4.1.714.1.2.3.13 | |||
| wbt3ConnectionsTable | 1.3.6.1.4.1.714.1.2.3.13.2 | not-accessible | A list of connection entries. The number of entries is the number of existing connections plus one. The last entry is a dummy entry reserved for new connection creation. wbt3ConnectionName for this dummy entry is 'Not Defined'. | |
| wbt3ConnectionEntry | 1.3.6.1.4.1.714.1.2.3.13.2.1 | not-accessible | A connection entry containing objects describing this connection. wbt3ConnectionName is the instance identifier for wbt3ConnectionEntry | |
| STR wbt3ConnectionName | 1.3.6.1.4.1.714.1.2.3.13.2.1.2 | DisplayString | read-write | Name of the connection. This object is served as instance identifier for the connection entry. Therefore value for this object must be unique among all entries. Maximum length depends on wbt3ConnectionType. (37 for RDP wbt3ConnectionType; 32 for ICA wbt3ConnectionType; 42 for TEC wbt3ConnectionType; 20 for DialUp wbt3ConnectionType) |
| INT wbt3ConnectionType | 1.3.6.1.4.1.714.1.2.3.13.2.1.3 | INTEGER | read-write | Type of the connection. This object can be modified when the associated wbt3ConnectionEntryStatus is notInService. |
| INT wbt3ConnectionEntryStatus | 1.3.6.1.4.1.714.1.2.3.13.2.1.10 | INTEGER | read-write | Status of this connection entry. This object is used to manage the creation and deletion of the wbt3ConnectionEntry. State machine for this object is compliant to RFC1903, definition of textual conventions for RowStatus. This object may not be set to 'active' unless the wbt3ConnectionName is set. active - this is an existing connection saved in permanent storage. Values of fields within this table entry are not allowed to modified while it is active. To modify fields within this table entry, take the entry to 'notInService' state first. notInService - this is a connection entry exists in the thinclient's temporary memory, but is unavailable for use by the thinclient device. Entry must be put in this state before modification to other fields (except wbt3ConnectionName) can be made. Changes to wbt3ConnectionName is NOT allowed. To modify the name of an existing connection, delete the connection by setting wbt3ConnectionEntryStatus to 'destroy', then create a new connection with the new name by following the description for status 'notReady', 'createAndGo' or 'createAndWait' as specified below. A management device has to set the wbt3ConnectionEntryStatus to 'active' to activate the connection entry. Entries remaining in notInService state for an excessive period of time will be removed to free up resource in the thinclient device. Entries in this state will not be retained after reboot. notReady - this is a dummy connection defined to facilitate creation of new entry. An administrator can create a new connection by modifying wbt3ConnectionName of this entry to a name which does not currently exist in wbt3ConnectionsTable. This will put the entry in notInService state. An administrator can then put the connection in permanent storage by changing wbt3ConnectionEntryStatus to 'active'. Note that the assigned connection name CANNOT be an empty or 'Not Defined' string. createAndGo - This status is supplied by a management station wishing to create a new instance of a connection entry and to have its status automatically set to active, making it available for use by the thinclient device. wbt3ConnectionName MUST be supplied in the same PDU which set wbt3connectionEntryStatus to 'createAndGo'. createAndWait - This status is supplied by a management station wishing to create a new instance of a connection entry (but not make it immediately available for use by the thinclient device). destroy - an administrator can delete an existing connection by setting this object of target entry to 'destroy'. |
| wbt3RDPConnections | 1.3.6.1.4.1.714.1.2.3.13.3 | |||
| wbt3RDPConnTable | 1.3.6.1.4.1.714.1.2.3.13.3.1 | not-accessible | A table of connections, number of entries is the number of entries in wbt3ConnectionTable which has wbt3ConnectionEntryStatus=active or notInService, and wbt3ConnectionType=RDP. | |
| wbt3RDPConnEntry | 1.3.6.1.4.1.714.1.2.3.13.3.1.1 | not-accessible | A RDP connection entry containing objects describing this connection. wbt3RDPConnName is the instance identifier for wbt3RDPConnEntry | |
| STR wbt3RDPConnName | 1.3.6.1.4.1.714.1.2.3.13.3.1.1.1 | DisplayString | read-only | Name of the RDP connection. This object is served as instance identifier for the RDPConnEntry. Value for this object is unique among all entries. |
| STR wbt3RDPConnServer | 1.3.6.1.4.1.714.1.2.3.13.3.1.1.2 | DisplayString | read-write | Host server name or IP address the RDP Client connects to. Maximum length is 32. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| INT wbt3RDPConnLowSpeed | 1.3.6.1.4.1.714.1.2.3.13.3.1.1.3 | INTEGER | read-write | Using low speed connection. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| INT wbt3RDPConnAutoLogon | 1.3.6.1.4.1.714.1.2.3.13.3.1.1.4 | INTEGER | read-write | Enable RDP automatic logon. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| STR wbt3RDPConnUsername | 1.3.6.1.4.1.714.1.2.3.13.3.1.1.5 | DisplayString | read-write | Specify the user name to atomatically logon to host. Maximum length is 32. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| STR wbt3RDPConnDomain | 1.3.6.1.4.1.714.1.2.3.13.3.1.1.7 | DisplayString | read-write | Domain name of host server. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| INT wbt3RDPConnStartApplication | 1.3.6.1.4.1.714.1.2.3.13.3.1.1.8 | INTEGER | read-write | Select application starts up at connection. 0 = Desktop, 2 = select File name radio button. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| STR wbt3RDPConnFilename | 1.3.6.1.4.1.714.1.2.3.13.3.1.1.9 | DisplayString | read-write | Name of the application to start. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| STR wbt3RDPConnWorkingDir | 1.3.6.1.4.1.714.1.2.3.13.3.1.1.10 | DisplayString | read-write | Application working directory. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| INT wbt3RDPConnModifiable | 1.3.6.1.4.1.714.1.2.3.13.3.1.1.30 | INTEGER | read-only | Indicate whether objects within this entry is modifiable currently. Objects are modifiable if wbt3ConnectionEntryStatus of associated connection entry in wbt3ConnectionsTable is in 'notInService'. |
| wbt3ICAConnections | 1.3.6.1.4.1.714.1.2.3.13.4 | |||
| wbt3ICAConnTable | 1.3.6.1.4.1.714.1.2.3.13.4.1 | not-accessible | A table of ICA connections, number of entries is the number of entries in wbt3ConnectionTable which has wbt3ConnectionEntryStatus=active or notInService, and wbt3ConnectionType=ICA. | |
| wbt3ICAConnEntry | 1.3.6.1.4.1.714.1.2.3.13.4.1.1 | not-accessible | A ICA connection entry containing objects describing this connection. wbt3ICAConnName is the instance identifier for wbt3ICAConnEntry | |
| STR wbt3ICAConnName | 1.3.6.1.4.1.714.1.2.3.13.4.1.1.1 | DisplayString | read-only | Name of the ICA connection. This object is served as instance identifier for the ICAConnEntry. Value for this object is unique among all entries. |
| INT wbt3ICAConnCommType | 1.3.6.1.4.1.714.1.2.3.13.4.1.1.2 | INTEGER | read-write | Communication media this connection uses. |
| STR wbt3ICAConnServer | 1.3.6.1.4.1.714.1.2.3.13.4.1.1.3 | DisplayString | read-write | IP address or name of ICA server connect to. Maximum length is 63. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| STR wbt3ICAConnCommandLine | 1.3.6.1.4.1.714.1.2.3.13.4.1.1.4 | DisplayString | read-write | Command line to be launched once this ICA connection is brought up. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| STR wbt3ICAConnWorkingDir | 1.3.6.1.4.1.714.1.2.3.13.4.1.1.5 | DisplayString | read-write | Working Directory to be used for this ICA. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| STR wbt3ICAConnUsername | 1.3.6.1.4.1.714.1.2.3.13.4.1.1.6 | DisplayString | read-write | User name to be used to log on to ICA server. Maximum length is 19. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| STR wbt3ICAConnDomain | 1.3.6.1.4.1.714.1.2.3.13.4.1.1.8 | DisplayString | read-write | Domain name to be used to log on to ICA server. Maximum length is 16. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| INT wbt3ICAConnColors | 1.3.6.1.4.1.714.1.2.3.13.4.1.1.9 | INTEGER | read-write | Specify 16/256 window colors. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| INT wbt3ICAConnDataCompress | 1.3.6.1.4.1.714.1.2.3.13.4.1.1.10 | INTEGER | read-write | Enable/Disable Data compression for this ICA session. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| INT wbt3ICAConnSoundQuality | 1.3.6.1.4.1.714.1.2.3.13.4.1.1.11 | INTEGER | read-write | Set sound quality for this ICA session, None to disable sound. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| INT wbt3ICAConnModifiable | 1.3.6.1.4.1.714.1.2.3.13.4.1.1.30 | INTEGER | read-only | Indicate whether objects within this entry is modifiable currently. Objects are modifiable if wbt3ConnectionEntryStatus of associated connection entry in wbt3ConnectionsTable is in 'notInService'. |
| wbt3TermConnections | 1.3.6.1.4.1.714.1.2.3.13.5 | |||
| wbt3TermConnTable | 1.3.6.1.4.1.714.1.2.3.13.5.1 | not-accessible | A table of Terminal Emulation connections, number of entries is the number of entries in wbt3ConnectionTable which has wbt3ConnectionEntryStatus=active or notInService, and wbt3ConnectionType=TEC. | |
| wbt3TermConnEntry | 1.3.6.1.4.1.714.1.2.3.13.5.1.1 | not-accessible | A terminal emulation connection entry containing objects describing this connection. wbt3TermConnName is the instance identifier for wbt3TermConnEntry | |
| STR wbt3TermConnName | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.1 | DisplayString | read-only | A unique name for the Terminal Emulation configuration entry. Maximum length is 42 |
| INT wbt3TermConnCommType | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.2 | INTEGER | read-write | Communication media this connection uses. |
| STR wbt3TermConnServer | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.3 | DisplayString | read-write | IP address or host name of terminal server connect to. Maximum length is 60. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| INT wbt3TermConnEmuType | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.4 | INTEGER | read-write | Emulation mode for this connection. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| INT wbt3TermConnVTEmuModel | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.5 | INTEGER | read-write | Terminal model uses for this connection. This field represents the VT Terminal ID. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| INT wbt3TermConnIBM3270EmuModel | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.6 | INTEGER | read-write | IBM 3270 terminal emulation models. This object is valid only when wbt3TermConnEmuType = IBM3270. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| INT wbt3TermConnIBM5250EmuModel | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.7 | INTEGER | read-write | IBM 5250 terminal emulation models. This object is valid only when wbt3TermConnEmuType = IBM5250. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| INT wbt3TermConnPortNumber | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.10 | INTEGER | read-write | Telnet port number used for this connection. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| STR wbt3TermConnTelnetName | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.11 | DisplayString | read-write | Name of this telnet session. Maximum length is 39. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| INT wbt3TermConnPrinterPort | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.12 | INTEGER | read-write | Printer port assigned to this connection. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| INT wbt3TermConnFormFeed | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.13 | INTEGER | read-write | Use Form Feed terminator for printing. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| INT wbt3TermConnAutoLineFeed | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.14 | INTEGER | read-write | Use Auto line Feed for printing. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| STR wbt3TermConnScript | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.15 | DisplayString | read-write | Script for this terminal emulation. Script syntax: Use back slash (\) to separate between 2 script commands, each script command has 2 entries (Act on and Send), Use semi column (;) to separate 2 entries. Samples: Login; or Login;\Username, Send entry syntax: C.return = Delay (2s) = Line Feed = Password = Pause (0.255) = UserName = . Maximum length is 256. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| INT wbt3TermConnModifiable | 1.3.6.1.4.1.714.1.2.3.13.5.1.1.30 | INTEGER | read-only | Indicate whether objects within this entry is modifiable currently. Objects are modifiable if wbt3ConnectionEntryStatus of associated connection entry in wbt3ConnectionsTable is in 'notInService'. |
| wbt3Users | 1.3.6.1.4.1.714.1.2.3.14 | |||
| wbt3UsersTable | 1.3.6.1.4.1.714.1.2.3.14.2 | not-accessible | A list of user accounts. The number of entries is the number of existing user accounts plus one. The last entry is a dummy entry reserved for new user account creation. wbt3userName for this dummy entry is 'Not Defined'. | |
| wbt3UsersEntry | 1.3.6.1.4.1.714.1.2.3.14.2.1 | not-accessible | A user account entry containing objects describing this user. wbt3userName is the instance identifier for wbt3UsersEntry | |
| INT wbt3UsersStatus | 1.3.6.1.4.1.714.1.2.3.14.2.1.2 | INTEGER | read-write | Status of this user account entry. This object is used to manage the creation and deletion of the wbt3UsersEntry. State machine for this object is compliant to RFC1903, definition of textual conventions for RowStatus. This object may not be set to 'active' unless the wbt3UserName is set. active - this is an existing user account saved in permanent storage. Values of fields within this table entry are not allowed to modified while it is active. To modify fields within this table entry, take the entry to 'notInService' state first. notInService - this is a user account entry exists in the thinclient's temporary memory, but is unavailable for use by the thinclient device. Entry must be put in this state before modification to other fields (except wbt3UserName) can be made. Changes to wbt3UserName is NOT allowed. To modify the name of an existing user account, delete the user account by setting wbt3UsersStatus to 'destroy', then create a new user account with the new name by following the description for status 'notReady', 'createAndGo' or 'createAndWait' as specified below. A management device has to set the wbt3UsersStatus to 'active' to activate the user account. Entries remaining in notInService state for an excessive period of time will be removed to free up resource in the thinclient device. Entries in this state will not be retained after reboot. notReady - this is a dummy user account defined to facilitate creation of new entry. An administrator can create a new user account by modifying wbt3UserName of this entry to a name which does not currently exist in wbt3UsersTable. This will put the entry in notInService state. An administrator can then put the user account in permanent storage by changing wbt3UsersStatus to 'active'. Note that the assigned user account name CANNOT be an empty or 'Not Defined' string. createAndGo - This status is supplied by a management station wishing to create a new instance of a user account and to have its status automatically set to active, making it available for use by the thinclient device. wbt3UserName MUST be supplied in the same PDU which set wbt3UsersStatus to 'createAndGo'. createAndWait - This status is supplied by a management station wishing to create a new instance of a user account. (but not make it immediately available for use by the thinclient device). destroy - an administrator can delete an existing user account by setting this object of target entry to 'destroy'. Note that the default administrator account with name 'Administrator' that is built in to the terminal cannot be deleted. |
| STR wbt3Username | 1.3.6.1.4.1.714.1.2.3.14.2.1.3 | DisplayString | read-write | Name of this user. This object is served as instance identifier for the user account entry. Therefore value for this object must be unique among all entries. Maximum length is 20. |
| STR wbt3Password | 1.3.6.1.4.1.714.1.2.3.14.2.1.4 | DisplayString | read-write | The password for this user account. Maximum length is 20. This object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| INT wbt3privilege | 1.3.6.1.4.1.714.1.2.3.14.2.1.5 | INTEGER | read-write | Indicates whether the user has extended, normal, or restricted rights on this terminal. Note that the privilege of the default administrator account (with name 'Administrator') cannot be modifed. For all other accounts, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| STR wbt3Connection1 | 1.3.6.1.4.1.714.1.2.3.14.2.1.7 | DisplayString | read-write | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| STR wbt3Connection2 | 1.3.6.1.4.1.714.1.2.3.14.2.1.8 | DisplayString | read-write | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| STR wbt3Connection3 | 1.3.6.1.4.1.714.1.2.3.14.2.1.9 | DisplayString | read-write | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| STR wbt3Connection4 | 1.3.6.1.4.1.714.1.2.3.14.2.1.10 | DisplayString | read-write | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| STR wbt3Connection5 | 1.3.6.1.4.1.714.1.2.3.14.2.1.11 | DisplayString | read-write | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| STR wbt3Connection6 | 1.3.6.1.4.1.714.1.2.3.14.2.1.12 | DisplayString | read-write | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| STR wbt3Connection7 | 1.3.6.1.4.1.714.1.2.3.14.2.1.13 | DisplayString | read-write | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| STR wbt3Connection8 | 1.3.6.1.4.1.714.1.2.3.14.2.1.14 | DisplayString | read-write | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable that is in an 'active' state. That is, the connection specified has to exist and be currently activated. Set this object to an empty string to dis-associate a connection from the user. For a user account that has Administrator privilege, all existing connections are associated with the user automatically. Therefore this object is not modifiable if wbt3privilege is 'Admin'. For accounts with User or Guest privilege, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| INT wbt3AutoStart1 | 1.3.6.1.4.1.714.1.2.3.14.2.1.15 | INTEGER | read-write | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection1 object when the user logs on. This object cannot be modified if wbt3Connection1 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| INT wbt3AutoStart2 | 1.3.6.1.4.1.714.1.2.3.14.2.1.16 | INTEGER | read-write | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection2 object when the user logs on. This object cannot be modified if wbt3Connection2 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| INT wbt3AutoStart3 | 1.3.6.1.4.1.714.1.2.3.14.2.1.17 | INTEGER | read-write | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection3 object when the user logs on. This object cannot be modified if wbt3Connection3 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| INT wbt3AutoStart4 | 1.3.6.1.4.1.714.1.2.3.14.2.1.18 | INTEGER | read-write | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection4 object when the user logs on. This object cannot be modified if wbt3Connection4 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| INT wbt3AutoStart5 | 1.3.6.1.4.1.714.1.2.3.14.2.1.19 | INTEGER | read-write | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection5 object when the user logs on. This object cannot be modified if wbt3Connection5 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| INT wbt3AutoStart6 | 1.3.6.1.4.1.714.1.2.3.14.2.1.20 | INTEGER | read-write | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection6 object when the user logs on. This object cannot be modified if wbt3Connection6 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| INT wbt3AutoStart7 | 1.3.6.1.4.1.714.1.2.3.14.2.1.21 | INTEGER | read-write | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection7 object when the user logs on. This object cannot be modified if wbt3Connection7 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| INT wbt3AutoStart8 | 1.3.6.1.4.1.714.1.2.3.14.2.1.22 | INTEGER | read-write | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection8 object when the user logs on. This object cannot be modified if wbt3Connection8 is empty string. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| INT wbt3UserPasswordChange | 1.3.6.1.4.1.714.1.2.3.14.2.1.23 | INTEGER | read-write | Indicates this user has privilege to change the password. For administrator, the password change is always on and cannot be set. For guest account, the password change is always off and cannot be set. For user account, the password change can be set on/off. Also, this object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
RFC description
Wyse thin client terminal configuration MIB for WBT 3000 series with network, display, and security settings.
Start monitoring Wyse Technology WBT3-series thin-client terminals (RAM/ROM/PC-Card inventory status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.