All MIBs › WYSE-MIB › wbt3DispFreq
wbt3DispFreq
Module: WYSE-MIB
OID (symbolic): WYSE-MIB::wbt3DispFreq
OID (numeric): 1.3.6.1.4.1.714.1.2.3.4.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A 8bit value which indicates the current display frequency in Hz. Available display frequency values for Leo: 60/75/85 Hz, for Mars: 60/75 Hz. wbt3DispFreq can not be set if use DDC is on.
What is wbt3DispFreq?
Reports/sets the current display refresh frequency in Hz (1-256); available values depend on platform, e.g. 60/75/85 Hz on Leo or 60/75 Hz on Mars. This object cannot be set while wbt3DispUseDDC is enabled, since DDC auto-negotiates the refresh rate instead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.714.1.2.3.4.1.1 snmpwalk -v2c -c public <target> WYSE-MIB::wbt3DispFreq
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.714.1.2.3.4.1.1.1 snmpget -v2c -c public <target> WYSE-MIB::wbt3DispFreq.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.714.1.2.3.4.1.1.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> wbt3DispFreq.1
Start monitoring Wyse Technology WBT3-series thin-client terminals (RAM/ROM/PC-Card inventory status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WYSE-MIB::wbt3DispFreq OID value, configure state conditions and alerts, and monitor any Wyse Technology WBT3-series thin-client terminals (RAM/ROM/PC-Card inventory status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.714 | wyse | WYSE-MIB |
| 1.3.6.1.4.1.714.1 | product | WYSE-MIB |
| 1.3.6.1.4.1.714.1.2 | thinClient | WYSE-MIB |
| 1.3.6.1.4.1.714.1.2.3 | wbt3 | WYSE-MIB |
| 1.3.6.1.4.1.714.1.2.3.4 | wbt3Display | WYSE-MIB |
| 1.3.6.1.4.1.714.1.2.3.4.1 | wbt3DispCharacteristic | WYSE-MIB |
| 1.3.6.1.4.1.714.1.2.3.4.1.1 | wbt3DispFreq | WYSE-MIB |