| OID symbolic | OID numeric | Type | Access | Description |
|---|
| wwpLeosSwXgradeMIB | 1.3.6.1.4.1.6141.2.60.10 | | | The MIB module for downloading and installing packages. |
| wwpLeosSwXgradeMIBObjects | 1.3.6.1.4.1.6141.2.60.10.1 | | | |
| wwpLeosSwXgrade | 1.3.6.1.4.1.6141.2.60.10.1.1 | | | |
| wwpLeosSwDownload | 1.3.6.1.4.1.6141.2.60.10.1.1.1 | | | |
| ADR wwpLeosSwDownloadServerAddrType | 1.3.6.1.4.1.6141.2.60.10.1.1.1.1 | AddressFamilyNumbers | read-write | Specifies the wwpLeosSwDownloadServerAddr type. It can
be set to 1 for IPV4 type addresses or can be
set to 16 for host name.
This MIB object is not supported. Any operation on this MIB object will fail!!! |
| STR wwpLeosSwDownloadServerAddr | 1.3.6.1.4.1.6141.2.60.10.1.1.1.2 | DisplayString | read-write | The ip address of the TFTP server or the host name from which the software
package should be downloaded.
Address must be a unicast address or host name that
is reachable from the agent and no firewalls/acls preventing
TFTP datagrams from being transferred.
This MIB object is not supported. Any operation on this MIB object will fail!!! |
| STR wwpLeosSwDownloadPackageName | 1.3.6.1.4.1.6141.2.60.10.1.1.1.3 | DisplayString | read-write | The package name (including the path, if applicable) to be
retrieved from the TFTP server. Length of package string must
not exceed 128 alpha-numeric characters,
no spaces in filenames.
This MIB object is not supported. Any operation on this MIB object will fail!!! |
| T/F wwpLeosSwDownLoadActivate | 1.3.6.1.4.1.6141.2.60.10.1.1.1.4 | TruthValue | read-write | Activate the software download operation with a value
of True(1). The object will return to 'false' once the
software download is completed. Poll wwpLeosSwDownloadStatus
for current status. Default value is False.
WwpSwDownLoadServerAddr and wwpLeosSwDownloadPackageName must
be valid prior to setting this object to True.
The management station will not be able to set this
object to 'true' if the package name does not follow the
correct syntax (i.e. wwp/cmd/pmf-1.0.gz).
This MIB object is not supported. Any operation on this MIB object will fail!!! |
| T/F wwpLeosSwDownloadNotifOnCompletion | 1.3.6.1.4.1.6141.2.60.10.1.1.1.5 | TruthValue | read-write | Specifies whether or not a wwpLeosSwDownloadCompletion
notification should be issued on completion of the TFTP
transfer. If such a notification is desired, it is the
responsibility of the management entity to ensure that the
SNMP administrative model is configured in such a way as to
allow the notification to be delivered.
This MIB object is not supported. Any operation on this MIB object will fail!!! |
| SWD wwpLeosSwDownloadStatus | 1.3.6.1.4.1.6141.2.60.10.1.1.1.6 | SwDownloadState | read-only | Specifies the state of this package download request.
If no package download request is being processed,
then the wwpLeosSwDownloadStatus should be 'idle'.
This MIB object is not supported. Any operation on this MIB object will fail!!! |
| SWD wwpLeosSwDownloadFailCause | 1.3.6.1.4.1.6141.2.60.10.1.1.1.7 | SwDownloadFailCause | read-only | The reason why the software download operation failed.
If no software download transfer request is being processed,
then the wwpLeosSwDownloadFailCause should be 'noStatus'.
This MIB object is not supported. Any operation on this MIB object will fail!!! |
| STR wwpLeosSwDownloadNotificationInfo | 1.3.6.1.4.1.6141.2.60.10.1.1.1.8 | DisplayString | read-only | The string explaining the error code in detail or
the additional info for the software download
completion.
This MIB object is not supported. Any operation on this MIB object will fail!!! |
| wwpLeosSwXgradeBladeTable | 1.3.6.1.4.1.6141.2.60.10.1.1.2 | | not-accessible | The (conceptual) table applies
for all the blades. |
| wwpLeosSwXgradeBladeEntry | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1 | | not-accessible | An entry (conceptual row) in the wwpLeosSwXgradeTable. |
| INT wwpLeosSwXgradeBladeId | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1.1 | INTEGER | read-only | The object indicates the unique id for the
blade. The id zero is reserved for chassis and
the corresponding Xgrade entry will be applied
to all the blades. |
| STR wwpLeosSwXgradePackage | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1.2 | DisplayString | read-write | The package name to be Xgraded. |
| SWX wwpLeosSwXgradeOp | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1.3 | SwXgradeOp | read-write | The Xgrade operation to be performed on the
specified blade. Following option can be set.
none: No upgrade option is selected.
install: This option will install the software
on the specified blade, if
the software is not currently installed there.
inServiceActivate : This option will activate any new software
installed on the specified blade (or all the blades)
only if the installation is not service affecting.
The option will fail if the blade cannot be activated
without affecting service.
serviceAffectingActivate : This option will activate any new software
installed on the specified blade.
It will attempt to do so without affecting service,
but will override if necessary.
inServiceXgrade: This option will Xgrade the specified blade
without affecting the services.
If inServiceXgrade is not possible for the blade,
then setting this option will result in Error and
a service affecting report will be generated.
serviceAffectingXgrade: This option will Xgrade the specified blade
with minimum service affecting downtime.
servAffectingXgradeReport: This option will generate a service affecting report for a
blade to go to the specified package.
Report file will be stored in local flash at following location
(/flash0/software/xgrade-sequence.txt)
servNonAffectingXgradeReport: This option will generate a service non affecting report for a
blade to go to the specified package.
Report file will be stored in local flash at following location
(/flash0/software/xgrade-sequence.txt) |
| ADR wwpLeosSwXgradeTftpAddrType | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1.4 | AddressFamilyNumbers | read-write | Specifies the wwpLeosSwXgradeTftpAddr type. It can
be set to 1 for IPV4 type addresses or can be
set to 16 for host name. |
| STR wwpLeosSwXgradeTftpAddr | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1.5 | DisplayString | read-write | The ip address of the TFTP server or the host name from which the software
package should be downloaded. This is optional.
Address must be a unicast address or host name that is reachable from the
agent and no firewalls/acls preventing TFTP datagrams from being transferred. |
| T/F wwpLeosSwXgradeOpActivate | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1.6 | TruthValue | read-write | Setting this object to 'true' will activate the
Xgrade operation for the blade. |
| INT wwpLeosSwXgradeOpStatus | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1.7 | INTEGER | read-only | Display the result of the wwpLeosSwXgradeOpActivate. |
| STR wwpLeosSwXgradePackagePath | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1.8 | DisplayString | read-write | Specifies the path for the package. If this object is set,
then device will prepend the package name specified by
wwpLeosSwXgradePackage object with wwpLeosSwXgradePackagePath.
To reset this object set it to 0 |
| INT wwpLeosSwXgradeTransferMode | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1.9 | INTEGER | read-write | The type of server to use. |
| STR wwpLeosSwXgradeLoginId | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1.10 | DisplayString | read-write | The username to use for xftp downloads. |
| STR wwpLeosSwXgradePassword | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1.11 | DisplayString | read-write | The password to use for xftp downloads. |
| STR wwpLeosSwXgradeSecret | 1.3.6.1.4.1.6141.2.60.10.1.1.2.1.12 | DisplayString | read-write | The secret to use for xftp downloads. |
| wwpLeosBladePackageInfoTable | 1.3.6.1.4.1.6141.2.60.10.1.1.3 | | not-accessible | The (conceptual) table applies for all the blades. |
| wwpLeosBladePackageInfoEntry | 1.3.6.1.4.1.6141.2.60.10.1.1.3.1 | | not-accessible | An entry (conceptual row) in the wwpLeosSwXgradeTable. |
| OCT wwpLeosBladeInstPackageVer | 1.3.6.1.4.1.6141.2.60.10.1.1.3.1.1 | OCTET STRING | read-only | This displays the installed package version of the blade. |
| OCT wwpLeosBladeRunPackageVer | 1.3.6.1.4.1.6141.2.60.10.1.1.3.1.2 | OCTET STRING | read-only | This displays the running package version of the blade. |
| OCT wwpLeosBladeDnldPackageVer | 1.3.6.1.4.1.6141.2.60.10.1.1.3.1.3 | OCTET STRING | read-only | This displays the downloaded package version on the blade. |
| OCT wwpLeosBladeInstPackageRlsStatus | 1.3.6.1.4.1.6141.2.60.10.1.1.3.1.4 | OCTET STRING | read-only | This displays the running release status of the blade. |
| wwpLeosSwXgradeGlobalAttrs | 1.3.6.1.4.1.6141.2.60.10.1.1.4 | | | |
| STR wwpLeosSwMIBVersion | 1.3.6.1.4.1.6141.2.60.10.1.1.4.1 | DisplayString | read-only | This MIB object shows the MIB version currently supported by the device. |
| OCT wwpLeosSwXgradeDestPath | 1.3.6.1.4.1.6141.2.60.10.1.1.4.2 | OCTET STRING | read-write | This object can be used to specify the destination path where file is
transferred to from the TFTP server. Length of destination string must
not exceed 128 alpha-numeric characters, no spaces in filenames. |
| OCT wwpLeosSwXgradePackagePathName | 1.3.6.1.4.1.6141.2.60.10.1.1.4.3 | OCTET STRING | read-write | This object can be used to specify the path for the package to be retrieved
from the TFTP server. Length of package path string must
not exceed 128 alpha-numeric characters, no spaces in filenames. |
| OCT wwpLeosSwXgradeTftpServer | 1.3.6.1.4.1.6141.2.60.10.1.1.4.4 | OCTET STRING | read-write | The dotted IP address of the TFTP server or the host name from which the software
package should be downloaded. This is optional. The default TFTP server will
be used if this object is set to empty string.
Address must be a unicast address or host name that is reachable from the
agent and no firewalls/acls preventing TFTP datagrams from being transferred. |
| INT wwpLeosSwXgradeRevertTimeout | 1.3.6.1.4.1.6141.2.60.10.1.1.4.5 | INTEGER | read-write | The value in seconds that the system will revert to previous software package
if the protect operation is not issued follows the activate operation. Value
of 0 implies the system will not revert automatically and it will remain
in the unprotected state. |
| INT wwpLeosSwXgradeBootOrder | 1.3.6.1.4.1.6141.2.60.10.1.1.4.6 | INTEGER | read-write | Set system boot order. |
| INT wwpLeosSwXgradeOptype | 1.3.6.1.4.1.6141.2.60.10.1.1.25 | INTEGER | read-write | The possible operations upgrading the software.
The description of each option is given below:
none : No upgrade operation is selected.
download : This operation to initiate the file transfer of software package from
TFTP server specified by wwpLeosTceSwXgradePackagePath to
wwpLeosTceSwXgradeDestPath. The default TFTP server will be used
for file transfer if the wwpLeosTceSwXgradeTftpServer is set to
empty string.
install : This operation to install the software to the standby CM (if present)
and all line cards. The image files are either stored in the TFTP server
specified by wwpLeosTceSwXgradePackagePath and wwpLeosTceSwXgradeTftpServer
or the compact flash of the active CM.
activate : This operation to activate any new software installed on all the blades.
the system will automatically revert to the previous software package
if a protect operation is not set within a time period specified by
wwpLeosTceSwXgradeRevertTimeout. If no time period is specified
(wwpLeosTceSwXgradeRevertTimeout value 0)
then the system will not revert automatically and it will remain in
the unprotected state indefinitely.
WARNING: Activating software requires a system restart.
protect : This operation to protect a new software package. If the protect operation
is not entered before the protect timeout is reached specified by
wwpLeosTceSwXgradeRevertTimeout, the system will
automatically revert to the previous software package.
revert : This operation to revert to the previous software package.
validate : This operation to validate the software package at the location
specified by the wwpLeosTceSwXgradePackagePath. Setting the
wwpLeosTceSwXgradePackagePath to empty string will validate the installed software.
run : This operation refers to the downloading, parsing, and executing of a specified
command file as initiated through CLI, DHCP or the file transfer MIB module.
This is used in appropriate notifications to report completion of such event.
An error will be returned when this object is attempted to be set to this value
using an SNMP set-request. |
| INT wwpLeosSwXgradeStatus | 1.3.6.1.4.1.6141.2.60.10.1.1.30 | INTEGER | read-only | Display the result of the last wwpLeosTceSwXgradeOp. |
| wwpLeosSwXgradeMIBNotificationPrefix | 1.3.6.1.4.1.6141.2.60.10.2 | | | |
| wwpLeosSwXgradeMIBNotifications | 1.3.6.1.4.1.6141.2.60.10.2.0 | | | |
| NTF wwpLeosSwDownloadCompletion | 1.3.6.1.4.1.6141.2.60.10.2.0.1 | | | A wwpLeosSwDownloadCompletion notification is sent
at the completion of a software download request. |
| NTF wwpLeosSwXgradeOpCompletion | 1.3.6.1.4.1.6141.2.60.10.2.0.2 | | | A wwpLeosSwXgradeOpCompletion notification is sent at
the completion of a install/activate/Xgrade request. |
| NTF wwpLeosSwXgradeBladePkgIncorrect | 1.3.6.1.4.1.6141.2.60.10.2.0.3 | | | A wwpLeosSwXgradeBladePkgIncorrect notification is sent
if device recognizes that it is running incorrect software
version. |
| NTF wwpLeosSwXgradeCompletion | 1.3.6.1.4.1.6141.2.60.10.2.0.4 | | | A wwpLeosTceSwXgradeCompletion notification is sent at the
completion of a wwpLeosTceSwXgradeOp (download/install/
activate/... etc). |
| wwpLeosSwXgradeMIBConformance | 1.3.6.1.4.1.6141.2.60.10.3 | | | |
| wwpLeosSwXgradeMIBCompliances | 1.3.6.1.4.1.6141.2.60.10.3.1 | | | |
| wwpLeosSwXgradeMIBGroups | 1.3.6.1.4.1.6141.2.60.10.3.2 | | | |
