All MIBs › WLSR-AP-MIB › wlsrTargetApSSID
wlsrTargetApSSID
Module: WLSR-AP-MIB
OID (symbolic): WLSR-AP-MIB::wlsrTargetApSSID
OID (numeric): 1.3.6.1.4.1.14823.2.3.1.1.100.100.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description:
This Object is used in the traps to indicate the SSID of the Access Point, for which we are raising the trap. If an Air Monitor is sending the trap then this will indicate AP. If an Access Point is sending the trap, then it will point to itself.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14823.2.3.1.1.100.100.2 snmpwalk -v2c -c public <target> WLSR-AP-MIB::wlsrTargetApSSID
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.14823.2.3.1.1.100.100.2.1 snmpget -v2c -c public <target> WLSR-AP-MIB::wlsrTargetApSSID.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.14823 | aruba | ARUBA-MIB |
| 1.3.6.1.4.1.14823.2 | arubaEnterpriseMibModules | ARUBA-MIB |
| 1.3.6.1.4.1.14823.2.3 | arubaAp | ARUBA-MIB |
| 1.3.6.1.4.1.14823.2.3.1 | wlsrEnterpriseMibModules | ARUBA-MIB |
| 1.3.6.1.4.1.14823.2.3.1.1 | wlsrMIB | WLSR-AP-MIB |
| 1.3.6.1.4.1.14823.2.3.1.1.100 | wlsrTrapsGroup | WLSR-AP-MIB |
| 1.3.6.1.4.1.14823.2.3.1.1.100.100 | wlsrTrapObjectsGroup | WLSR-AP-MIB |
| 1.3.6.1.4.1.14823.2.3.1.1.100.100.2 | wlsrTargetApSSID | WLSR-AP-MIB |