All MIBs › WG302-MIB › setWirelessstatus
setWirelessstatus
Module: WG302-MIB
OID (symbolic): WG302-MIB::setWirelessstatus
OID (numeric): 1.3.6.1.4.1.4526.4.2.9.2
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This a command field for conntrol AP's wireless card action. 0: enable wireless card 1: disable wireless card
What is setWirelessstatus?
Turns the AP's wireless radio on or off. The object's SYNTAX is TruthValue (whose standard values are true(1)/false(2)), but the MIB's own DESCRIPTION text says writing 0 enables the wireless card and 1 disables it - values that don't actually match TruthValue's 1/2 encoding, so treat that 0/1 wording as a documentation error and verify the real on/off values against the device before scripting against this object.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.4.2.9.2 snmpwalk -v2c -c public <target> WG302-MIB::setWirelessstatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.4.2.9.2.1 snmpget -v2c -c public <target> WG302-MIB::setWirelessstatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.4.2.9.2.1 s <value>
Start monitoring NETGEAR ProSafe WG302 wireless access point (network-config/spanning-tree/client-traffic status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WG302-MIB::setWirelessstatus OID value, configure state conditions and alerts, and monitor any NETGEAR ProSafe WG302 wireless access point (network-config/spanning-tree/client-traffic status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.4 | wirelessProducts | NETGEAR-ME-MIB |
| 1.3.6.1.4.1.4526.4.2 | wg302 | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.4.2.9 | userCommand | WG302-MIB |
| 1.3.6.1.4.1.4526.4.2.9.2 | setWirelessstatus | WG302-MIB |