VTGW-MIB

All MIBs › VTGW-MIB

Category: Video and Virtualization

Description: Manages video teleconference gateway parameters including call routing, codec configuration, and bandwidth allocation.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VTGW-MIB?

VTGW-MIB is a vendor MIB for a Video TeleconferenceGateWay device, covering the gateway's call routing, codec configuration, and bandwidth allocation used to bridge video/voice conferencing sessions between different networks or protocols. It exposes configuration data for how calls are routed, which codecs are negotiated, and how bandwidth is allotted per call or per link. For monitoring, it is used to track the operational health of the gateway's call-handling function -- such as active call/session status and bandwidth allocation state -- functioning as a proxy for overall device software health even though no module description or object list was available to confirm hardware sensor coverage. No explicit dependency on other MIBs is apparent from the available metadata. It would typically be deployed in enterprise or carrier video-conferencing infrastructure, on a gateway appliance mediating calls between H.323/SIP endpoints or between video and telephony networks, and administrators can get the VTGW-MIB download to load it directly into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VTGW-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

video teleconferencing gateway appliance

Monitoring Examples

No sample objects or module description text were available for this MIB, so specific object names cannot be cited; based on the short description, an operator would likely poll call routing and bandwidth allocation objects to spot an overloaded gateway link or failed codec negotiation. Because no object list was extracted, this scenario is necessarily generic rather than grounded in real identifiers.

What Can Be Monitored

call routing configuration
codec configuration
bandwidth allocation per call/link
active call/session status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
TimeTicks
enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
vocaltec	1.3.6.1.4.1.2516
vtg	1.3.6.1.4.1.2516.2
NTF setParameterFailure	1.3.6.1.4.1.2516.2.0.1			Setting parameter failed.
NTF haspExistance	1.3.6.1.4.1.2516.2.0.2			HASP existance failed.
NTF cti2ServiceFailure	1.3.6.1.4.1.2516.2.0.3			CTI2 service failed.
NTF vgkLoginFailure	1.3.6.1.4.1.2516.2.0.4			VTG has failed to login to VGK.
NTF vgkLogoutFailure	1.3.6.1.4.1.2516.2.0.5			VTG has failed to logout from VGK.
NTF vgkDisconnection	1.3.6.1.4.1.2516.2.0.6			VTG disconnected from VGK.
NTF telephonyError	1.3.6.1.4.1.2516.2.0.7			Telephony error.
NTF incorrectPasswordCalls	1.3.6.1.4.1.2516.2.0.8			Incorrect password call.
NTF disconnectedCalls	1.3.6.1.4.1.2516.2.0.9			Disconnected call.
NTF notSupportedCalls	1.3.6.1.4.1.2516.2.0.10			Not supported Call.
tgw	1.3.6.1.4.1.2516.2.1
STR softwareVersion	1.3.6.1.4.1.2516.2.1.1	DisplayString	read-only	The VTGW software version number.
STR cti2Service	1.3.6.1.4.1.2516.2.1.2	DisplayString	read-only	CTI2 service name.
INT resloveMode	1.3.6.1.4.1.2516.2.1.3	INTEGER	read-write	Resolving mode of the destination gateway IP address: can be done by a gatekeeper or localy at the VTGW by dialing plan.
INT telephonyProtocol	1.3.6.1.4.1.2516.2.1.4	INTEGER	read-write	The telephony protocol used by VTGW.
INT internetProtocol	1.3.6.1.4.1.2516.2.1.5	INTEGER	read-write	The Internet protocol used by VTGW.
INT universalLinesNumber	1.3.6.1.4.1.2516.2.1.6	INTEGER	read-only	The maximum number of universal (vioce and fax capability) lines,that can be licensed on this VTGW.
INT voiceLinesNumber	1.3.6.1.4.1.2516.2.1.7	INTEGER	read-only	The maximum number of voice lines,that can be licensed on this VTGW.
INT faxLinesNumber	1.3.6.1.4.1.2516.2.1.8	INTEGER	read-only	The maximum number of fax lines,that can be licensed on this VTGW.
INT sncLinesNumber	1.3.6.1.4.1.2516.2.1.9	INTEGER	read-only	The maximum number of Surf & Call lines,that can be licensed on this VTGW.
INT iPhoneLinesNumber	1.3.6.1.4.1.2516.2.1.10	INTEGER	read-only	The maximum number of iPhone lines,that can be licensed on this VTGW.
INT dialerLinesNumber	1.3.6.1.4.1.2516.2.1.11	INTEGER	read-only	The maximum number of Dialer lines,that can be licensed on this VTGW.
INT cti2ServicePollingQuantum	1.3.6.1.4.1.2516.2.1.14	INTEGER	read-write	CTI2 service polling quantum (sec).
vnmvgk	1.3.6.1.4.1.2516.2.2
INT rcamPort	1.3.6.1.4.1.2516.2.2.1	INTEGER	read-only	VNM (RCAM) port.
STR id	1.3.6.1.4.1.2516.2.2.2	DisplayString	read-only	VGK ID.
STR alias	1.3.6.1.4.1.2516.2.2.3	DisplayString	read-only	VGK Alias.
INT time2Live	1.3.6.1.4.1.2516.2.2.5	INTEGER	read-write	Time in seconds to live acknowledge to VGK.
INT loginSetAttempts	1.3.6.1.4.1.2516.2.2.6	INTEGER	read-write	Login attempts to VGK within a set.
INT timeB4LoginAttempt	1.3.6.1.4.1.2516.2.2.7	INTEGER	read-write	Time in seconds before the next login attempt to VGK within a set.
INT timeB4LoginSet	1.3.6.1.4.1.2516.2.2.8	INTEGER	read-write	Time in seconds before the next login set to VGK.
INT rasPort	1.3.6.1.4.1.2516.2.2.30	INTEGER	read-only	The port for connecting the VGK.
hasp	1.3.6.1.4.1.2516.2.3
audio	1.3.6.1.4.1.2516.2.4
STR codecsPriorities	1.3.6.1.4.1.2516.2.4.1	DisplayString	read-write	Prioritized list of active codecs ex: 7 1 2 5 8 20
INT preferredCodec	1.3.6.1.4.1.2516.2.4.2	INTEGER	read-write	Preferred codec.
STR outputGain	1.3.6.1.4.1.2516.2.4.3	DisplayString	read-write	Output volume gain.
STR inputGain	1.3.6.1.4.1.2516.2.4.4	DisplayString	read-write	Input volume gain.
codecsTable	1.3.6.1.4.1.2516.2.4.5		not-accessible	codecs array of structures.
codecEntry	1.3.6.1.4.1.2516.2.4.5.1		not-accessible	Codec entry.
INT coder	1.3.6.1.4.1.2516.2.4.5.1.1	INTEGER	read-only	Coder number.
INT vadEnable	1.3.6.1.4.1.2516.2.4.5.1.2	INTEGER	read-write	VAD enable.
INT coderRate	1.3.6.1.4.1.2516.2.4.5.1.3	INTEGER	read-write	Coder Rate.
INT framesPerPkt	1.3.6.1.4.1.2516.2.4.5.1.4	INTEGER	read-write	Frames Per Pkt.
INT framesSize	1.3.6.1.4.1.2516.2.4.5.1.5	INTEGER	read-write	Frames Size.
STR jitter	1.3.6.1.4.1.2516.2.4.5.1.6	DisplayString	read-write	Jitter Min. Delay.
STR jitterOptFactor	1.3.6.1.4.1.2516.2.4.5.1.7	DisplayString	read-write	Jitter Opt Factor.
INT coderRedundency	1.3.6.1.4.1.2516.2.4.5.1.8	INTEGER	read-write	CoderRedundency.
ports	1.3.6.1.4.1.2516.2.5
portsTable	1.3.6.1.4.1.2516.2.5.1		not-accessible	Ports array of structures.
portEntry	1.3.6.1.4.1.2516.2.5.1.1		not-accessible	Port entry.
INT portNumber	1.3.6.1.4.1.2516.2.5.1.1.1	INTEGER	read-write	Port number.
INT portEnable	1.3.6.1.4.1.2516.2.5.1.1.2	INTEGER	read-write	Port enable.
INT connectedTo	1.3.6.1.4.1.2516.2.5.1.1.3	INTEGER	read-write	Connected to.
INT boundDirection	1.3.6.1.4.1.2516.2.5.1.1.4	INTEGER	read-write	Bound direction.
INT dialingMode	1.3.6.1.4.1.2516.2.5.1.1.5	INTEGER	read-write	Dialing mode.
INT detectionMode	1.3.6.1.4.1.2516.2.5.1.1.6	INTEGER	read-write	Detection mode.
INT ivrMode	1.3.6.1.4.1.2516.2.5.1.1.7	INTEGER	read-write	IVR mode.
INT repeatIVR	1.3.6.1.4.1.2516.2.5.1.1.8	INTEGER	read-write	Repeat IVR.
INT overSilenceTime	1.3.6.1.4.1.2516.2.5.1.1.9	INTEGER	read-write	OverSilence time.
STR comment	1.3.6.1.4.1.2516.2.5.1.1.10	DisplayString	read-write	Comment.
ivr	1.3.6.1.4.1.2516.2.6
INT interDigitTimeout	1.3.6.1.4.1.2516.2.6.1	INTEGER	read-write	Inter digit timeout.
INT digitsTimeout	1.3.6.1.4.1.2516.2.6.2	INTEGER	read-write	Timeout for all digits.
telephonyProtocols	1.3.6.1.4.1.2516.2.7
analog	1.3.6.1.4.1.2516.2.7.1
INT ringCount	1.3.6.1.4.1.2516.2.7.1.21	INTEGER	read-write	Number of rings before returning the ring event.
INT volume	1.3.6.1.4.1.2516.2.7.1.22	INTEGER	read-write	Engine volume control.
enm	1.3.6.1.4.1.2516.2.7.2
STR idle	1.3.6.1.4.1.2516.2.7.2.1	DisplayString	read-write	Idle bits, default=00--
STR outOfService	1.3.6.1.4.1.2516.2.7.2.2	DisplayString	read-write	Out Of Service bits, default=1101
STR seizeOutbound	1.3.6.1.4.1.2516.2.7.2.3	DisplayString	read-write	Seize Outbound bits, default=11--
STR seizeInbound	1.3.6.1.4.1.2516.2.7.2.4	DisplayString	read-write	Seize Inbound bits, default=11--
STR seizeAckOutbound	1.3.6.1.4.1.2516.2.7.2.5	DisplayString	read-write	Seize Acknowledge Outbound bits, default=W---
STR seizeAckInbound	1.3.6.1.4.1.2516.2.7.2.6	DisplayString	read-write	Seize Acknowledge Inbound bits, default=W---
STR answerOutbound	1.3.6.1.4.1.2516.2.7.2.7	DisplayString	read-write	Answer Outbound bits, default=11--
STR answerInbound	1.3.6.1.4.1.2516.2.7.2.8	DisplayString	read-write	Answer Inbound bits, default=11--
STR dropOutbound	1.3.6.1.4.1.2516.2.7.2.9	DisplayString	read-write	Drop Outbound bits, default=00--
STR dropInbound	1.3.6.1.4.1.2516.2.7.2.10	DisplayString	read-write	Drop Inbound bits, , default=00--
INT noAnswerSec	1.3.6.1.4.1.2516.2.7.2.11	INTEGER	read-write	Length of time to wait after first ring back before deciding that the call isn't answered, in 10 mSec, default=3000.
INT continuesNoSignal	1.3.6.1.4.1.2516.2.7.2.12	INTEGER	read-write	The max. length of time that no ringback was returned, in 10 mSec, default=4000.
INT helloEdge	1.3.6.1.4.1.2516.2.7.2.13	INTEGER	read-write	When to tell the app. that the remote connected, 1=Rising Endge - Immediately when connect is detected, 2=Falling Endge - After the end of the solution.
INT maxInterRing	1.3.6.1.4.1.2516.2.7.2.14	INTEGER	read-write	The max time between ring backs to decide that the call connected, in 10 mSec, default=800.
STR dialToneLocal	1.3.6.1.4.1.2516.2.7.2.15	DisplayString	read-write	Local Dial tone, default= .
STR dialToneIntl	1.3.6.1.4.1.2516.2.7.2.16	DisplayString	read-write	International Dial tone, default= .
STR dialToneXtra	1.3.6.1.4.1.2516.2.7.2.17	DisplayString	read-write	Extra Dial tone, default= .
STR busy1Tone	1.3.6.1.4.1.2516.2.7.2.18	DisplayString	read-write	Busy 1 tone, default= .
STR busy2Tone	1.3.6.1.4.1.2516.2.7.2.19	DisplayString	read-write	Busy 2 tone, default= .
STR ringback1Tone	1.3.6.1.4.1.2516.2.7.2.20	DisplayString	read-write	Ringback 1 tone, default= .
STR ringback2Tone	1.3.6.1.4.1.2516.2.7.2.21	DisplayString	read-write	Ringback 2 tone, default= .
STR disconnect1Tone	1.3.6.1.4.1.2516.2.7.2.22	DisplayString	read-write	Disconnect 1 tone, default= .
STR disconnect2Tone	1.3.6.1.4.1.2516.2.7.2.23	DisplayString	read-write	Disconnect 2 tone, default= .
INT waitForDropAckTimer	1.3.6.1.4.1.2516.2.7.2.24	INTEGER	read-write	The time to wait for drop ack, in mSec, default=2000.
INT waitForSiezeAckTimer	1.3.6.1.4.1.2516.2.7.2.25	INTEGER	read-write	The time to wait for sieze ack, in mSec, default=10000.
STR digitsMode	1.3.6.1.4.1.2516.2.7.2.26	DisplayString	read-write	The pormat of sending the digits - 'T'=DTMF, 'M'=MF, 'P'=PULSE, default='T'.
INT isDnisBeforeAni	1.3.6.1.4.1.2516.2.7.2.27	INTEGER	read-write	Does the ANI is previous to the DNIS, if 1(TRUE) - DNIS is before the ANI, default=1(TRUE).
INT collectAni	1.3.6.1.4.1.2516.2.7.2.28	INTEGER	read-write	Should the engine expect ANI. Default=1(TRUE)
INT prewinkLength	1.3.6.1.4.1.2516.2.7.2.29	INTEGER	read-write	The max. length in 10mSec of the pre-wink. Default=0
INT winkLength	1.3.6.1.4.1.2516.2.7.2.30	INTEGER	read-write	The max. length of the wink generation, in 10 mSec. Default=15
INT minWinkDetection	1.3.6.1.4.1.2516.2.7.2.31	INTEGER	read-write	The min. time in the receiver for detecting the wink, in 10 mSec. Default=10
INT maxWinkDetection	1.3.6.1.4.1.2516.2.7.2.32	INTEGER	read-write	The max. time in the receiver for detecting the wink, in 10 mSec. Default=32
INT maxDigitsDnis	1.3.6.1.4.1.2516.2.7.2.33	INTEGER	read-write	The max. # of DNIS digits for the receiver/transmiter. The max. # of digits for the DNIS+ANI in hardware dependenc-31.
INT maxDigitsAni	1.3.6.1.4.1.2516.2.7.2.34	INTEGER	read-write	The max.# of ANI digits for the receiver/transmiter. The max.# of digits for the DNIS+ANI in hardware dependenc-31.
INT minTimeToDetectTransition	1.3.6.1.4.1.2516.2.7.2.35	INTEGER	read-write	The min. time to detect transition from 0 to 1 and from 1 to 0, in 10mSec. Default=5 (max. value is 255)
STR charBeforedigits	1.3.6.1.4.1.2516.2.7.2.36	DisplayString	read-write	the character before the digits, Default - '*', if there isnt any '' will be used
STR charBetweenAniAndDnis	1.3.6.1.4.1.2516.2.7.2.37	DisplayString	read-write	If there is ANI - this is the char between the DNIS and the ANI, Default - '*', if there isnt any '' will be used
STR charInTheEndOfDigits	1.3.6.1.4.1.2516.2.7.2.38	DisplayString	read-write	The char in the end of digits, Default - '*', if there isnt any '' will be used
STR sendCharBeforeDigits	1.3.6.1.4.1.2516.2.7.2.39	DisplayString	read-write	The char before the digits, Default - '*', if there isnt any '' will be used
STR sendDnisbeforeAni	1.3.6.1.4.1.2516.2.7.2.40	DisplayString	read-write	Does ANI is previous to the DNIS, if TRUE DNIS will be sent before the ANI, default DNIS before the ANI
STR sendCharBetweenAniAndDnis	1.3.6.1.4.1.2516.2.7.2.41	DisplayString	read-write	If there is ANI - this is the char between the DNIS and the ANI, Default - '*', if there isnt any '' will be used
STR sendCharcharInTheEndOfDigits	1.3.6.1.4.1.2516.2.7.2.42	DisplayString	read-write	The char in the end of the digits, Default - '*', if there isnt any '' will be used
STR fileToPlay	1.3.6.1.4.1.2516.2.7.2.43	DisplayString	read-write	Path+name of .WAV file to play to user in case of Clear-Back.
STR repeatPlayFile	1.3.6.1.4.1.2516.2.7.2.44	DisplayString	read-write	Loop the playing of the Clear-Back .WAV file - '0' or '1' only.
gc	1.3.6.1.4.1.2516.2.7.3
STR protocolConfigFileIn	1.3.6.1.4.1.2516.2.7.3.1	DisplayString	read-write	Protocol config file in.
STR protocolConfigFileOut	1.3.6.1.4.1.2516.2.7.3.2	DisplayString	read-write	Protocol config file out.
STR listOfProtocolConfigFilesIn	1.3.6.1.4.1.2516.2.7.3.3	DisplayString	read-only	A list of the possible protocol config files in.
STR listOfProtocolConfigFilesOut	1.3.6.1.4.1.2516.2.7.3.4	DisplayString	read-only	A list of the possible protocol config files out.
pri	1.3.6.1.4.1.2516.2.7.4
INT protocolTrace	1.3.6.1.4.1.2516.2.7.4.2	INTEGER	read-write	Activating Dialogic PRI log tracer.
erbium	1.3.6.1.4.1.2516.2.7.5
iridium	1.3.6.1.4.1.2516.2.7.7
INT hostID	1.3.6.1.4.1.2516.2.7.7.2	INTEGER	read-write	SS#7 host ID can be from 0-31. Default = 0.
STR sIUIPorID	1.3.6.1.4.1.2516.2.7.7.3	DisplayString	read-write	SIU IP address or ID.
INT channelSelectionOrder	1.3.6.1.4.1.2516.2.7.20	INTEGER	read-write	Order in which the selection is done - Up (1) or Down (2) only.
INT glareMode	1.3.6.1.4.1.2516.2.7.21	INTEGER	read-write	Glare mode selection - YIELD (1) or STAND (2) only.
stat	1.3.6.1.4.1.2516.2.8
STR timeUpTotal	1.3.6.1.4.1.2516.2.8.1	DisplayString	read-only	Time up total.
STR timeUpInterval	1.3.6.1.4.1.2516.2.8.2	DisplayString	read-only	Time up interval.
STR timeSpanTotal	1.3.6.1.4.1.2516.2.8.3	DisplayString	read-only	Time span total.
STR timeSpanInterval	1.3.6.1.4.1.2516.2.8.4	DisplayString	read-only	Time span interval.
CTR vgkLoginAttemptTotal	1.3.6.1.4.1.2516.2.8.5	Counter	read-only	GateKeeper login attempt total.
CTR vgkLoginAttemptInterval	1.3.6.1.4.1.2516.2.8.6	Counter	read-only	GateKeeper login attempt interval.
CTR vgkLoginSuccessTotal	1.3.6.1.4.1.2516.2.8.7	Counter	read-only	GateKeeper login success total.
CTR vgkLoginSuccessInterval	1.3.6.1.4.1.2516.2.8.8	Counter	read-only	GateKeeper login success interval.
CTR vgkLoginFailureTotal	1.3.6.1.4.1.2516.2.8.9	Counter	read-only	GateKeeper login failure total.
CTR vgkLoginFailureInterval	1.3.6.1.4.1.2516.2.8.10	Counter	read-only	GateKeeper login failure interval.
CTR vgkLogoutAttemptTotal	1.3.6.1.4.1.2516.2.8.11	Counter	read-only	GateKeeper logout attempt total.
CTR vgkLogoutAttemptInterval	1.3.6.1.4.1.2516.2.8.12	Counter	read-only	GateKeeper logout attempt interval.
CTR vgkLogoutSuccessTotal	1.3.6.1.4.1.2516.2.8.13	Counter	read-only	GateKeeper logout success total.
CTR vgkLogoutSuccessInterval	1.3.6.1.4.1.2516.2.8.14	Counter	read-only	GateKeeper logout success interval.
CTR vgkLogoutFailureTotal	1.3.6.1.4.1.2516.2.8.15	Counter	read-only	GateKeeper logout failure total.
CTR vgkLogoutFailureInterval	1.3.6.1.4.1.2516.2.8.16	Counter	read-only	GateKeeper logout failure interval.
CTR vgkDisconnectionTotal	1.3.6.1.4.1.2516.2.8.17	Counter	read-only	GateKeeper disconnection failure total.
CTR vgkDisconnectionInterval	1.3.6.1.4.1.2516.2.8.18	Counter	read-only	GateKeeper disconnection failure interval.
INT callValue	1.3.6.1.4.1.2516.2.8.19	INTEGER	read-only	Calls value.
CTR callInterval	1.3.6.1.4.1.2516.2.8.20	Counter	read-only	Calls interval.
INT callMaxTotal	1.3.6.1.4.1.2516.2.8.21	INTEGER	read-only	Calls max total.
INT callMaxInterval	1.3.6.1.4.1.2516.2.8.22	INTEGER	read-only	Calls max interval.
INT callAverageTotal	1.3.6.1.4.1.2516.2.8.23	INTEGER	read-only	Calls average total.
INT callAverageInterval	1.3.6.1.4.1.2516.2.8.24	INTEGER	read-only	Calls average interval.
CTR callTotal	1.3.6.1.4.1.2516.2.8.25	Counter	read-only	Calls total.
INT universalCallValue	1.3.6.1.4.1.2516.2.8.26	INTEGER	read-only	Universal calls value.
CTR universalCallInterval	1.3.6.1.4.1.2516.2.8.27	Counter	read-only	Universal calls interval.
INT universalCallMaxTotal	1.3.6.1.4.1.2516.2.8.28	INTEGER	read-only	Universal calls max total.
INT universalCallMaxInterval	1.3.6.1.4.1.2516.2.8.29	INTEGER	read-only	Universal calls max interval.
INT universalCallAverageTotal	1.3.6.1.4.1.2516.2.8.30	INTEGER	read-only	Universal calls average total.
INT universalCallAverageInterval	1.3.6.1.4.1.2516.2.8.31	INTEGER	read-only	Universal calls average interval.
CTR universalCallTotal	1.3.6.1.4.1.2516.2.8.32	Counter	read-only	Universal calls total.
INT voiceCallValue	1.3.6.1.4.1.2516.2.8.33	INTEGER	read-only	Voice calls value.
CTR voiceCallInterval	1.3.6.1.4.1.2516.2.8.34	Counter	read-only	Voice calls interval.
INT voiceCallMaxTotal	1.3.6.1.4.1.2516.2.8.35	INTEGER	read-only	Voice calls max total.
INT voiceCallMaxInterval	1.3.6.1.4.1.2516.2.8.36	INTEGER	read-only	Voice calls max interval.
INT voiceCallAverageTotal	1.3.6.1.4.1.2516.2.8.37	INTEGER	read-only	Voice calls average total.
INT voiceCallAverageInterval	1.3.6.1.4.1.2516.2.8.38	INTEGER	read-only	Voice calls average interval.
CTR voiceCallTotal	1.3.6.1.4.1.2516.2.8.39	Counter	read-only	Voice calls total.
INT faxCallValue	1.3.6.1.4.1.2516.2.8.40	INTEGER	read-only	Fax calls value.
CTR faxCallInterval	1.3.6.1.4.1.2516.2.8.41	Counter	read-only	Fax calls interval.
INT faxCallMaxTotal	1.3.6.1.4.1.2516.2.8.42	INTEGER	read-only	Fax calls max total.
INT faxCallMaxInterval	1.3.6.1.4.1.2516.2.8.43	INTEGER	read-only	Fax calls max interval.
INT faxCallAverageTotal	1.3.6.1.4.1.2516.2.8.44	INTEGER	read-only	Fax calls average total.
INT faxCallAverageInterval	1.3.6.1.4.1.2516.2.8.45	INTEGER	read-only	Fax calls average interval.
CTR faxCallTotal	1.3.6.1.4.1.2516.2.8.46	Counter	read-only	Fax calls total.
INT sncCallValue	1.3.6.1.4.1.2516.2.8.47	INTEGER	read-only	S&C calls value.
CTR sncCallInterval	1.3.6.1.4.1.2516.2.8.48	Counter	read-only	S&C calls interval.
INT sncCallMaxTotal	1.3.6.1.4.1.2516.2.8.49	INTEGER	read-only	S&C calls max total.
INT sncCallMaxInterval	1.3.6.1.4.1.2516.2.8.50	INTEGER	read-only	S&C calls max interval.
INT sncCallAverageTotal	1.3.6.1.4.1.2516.2.8.51	INTEGER	read-only	S&C calls average total.
INT sncCallAverageInterval	1.3.6.1.4.1.2516.2.8.52	INTEGER	read-only	S&C calls average interval.
CTR sncCallTotal	1.3.6.1.4.1.2516.2.8.53	Counter	read-only	S&C calls total.
INT iPhoneCallValue	1.3.6.1.4.1.2516.2.8.54	INTEGER	read-only	iPhone calls value.
CTR iPhoneCallInterval	1.3.6.1.4.1.2516.2.8.55	Counter	read-only	iPhone calls interval.
INT iPhoneCallMaxTotal	1.3.6.1.4.1.2516.2.8.56	INTEGER	read-only	iPhone calls max total.
INT iPhoneCallMaxInterval	1.3.6.1.4.1.2516.2.8.57	INTEGER	read-only	iPhone calls max interval.
INT iPhoneCallAverageTotal	1.3.6.1.4.1.2516.2.8.58	INTEGER	read-only	iPhone calls average total.
INT iPhoneCallAverageInterval	1.3.6.1.4.1.2516.2.8.59	INTEGER	read-only	iPhone calls average interval.
CTR iPhoneCallTotal	1.3.6.1.4.1.2516.2.8.60	Counter	read-only	iPhone calls total.
INT dialerCallValue	1.3.6.1.4.1.2516.2.8.61	INTEGER	read-only	Dialer calls value.
CTR dialerCallInterval	1.3.6.1.4.1.2516.2.8.62	Counter	read-only	Dialer calls interval.
INT dialerCallMaxTotal	1.3.6.1.4.1.2516.2.8.63	INTEGER	read-only	Dialer calls max total.
INT dialerCallMaxInterval	1.3.6.1.4.1.2516.2.8.64	INTEGER	read-only	Dialer calls max interval.
INT dialerCallAverageTotal	1.3.6.1.4.1.2516.2.8.65	INTEGER	read-only	Dialer calls average total.
INT dialerCallAverageInterval	1.3.6.1.4.1.2516.2.8.66	INTEGER	read-only	Dialer calls average interval.
CTR dialerCallTotal	1.3.6.1.4.1.2516.2.8.67	Counter	read-only	Dialer calls total.
CTR incorrectPasswordCallTotal	1.3.6.1.4.1.2516.2.8.68	Counter	read-only	incorrect password calls total.
CTR incorrectPasswordCallInterval	1.3.6.1.4.1.2516.2.8.69	Counter	read-only	incorrect password calls interval.
CTR notSupportedCallTotal	1.3.6.1.4.1.2516.2.8.72	Counter	read-only	not supported calls total.
CTR notSupportedCallInterval	1.3.6.1.4.1.2516.2.8.73	Counter	read-only	not supported calls interval.
INT incomingInternetAttemptCallValue	1.3.6.1.4.1.2516.2.8.74	INTEGER	read-only	.
CTR incomingInternetAttemptCallInterval	1.3.6.1.4.1.2516.2.8.75	Counter	read-only	.
INT incomingInternetAttemptCallMaxTotal	1.3.6.1.4.1.2516.2.8.76	INTEGER	read-only	.
INT incomingInternetAttemptCallMaxInterval	1.3.6.1.4.1.2516.2.8.77	INTEGER	read-only	.
INT incomingInternetAttemptCallAverageTotal	1.3.6.1.4.1.2516.2.8.78	INTEGER	read-only	.
INT incomingInternetAttemptCallAverageInterval	1.3.6.1.4.1.2516.2.8.79	INTEGER	read-only	.
CTR incomingInternetAttemptCallTotal	1.3.6.1.4.1.2516.2.8.80	Counter	read-only	.
INT incomingInternetSuccessCallValue	1.3.6.1.4.1.2516.2.8.81	INTEGER	read-only	.
CTR incomingInternetSuccessCallInterval	1.3.6.1.4.1.2516.2.8.82	Counter	read-only	.
INT incomingInternetSuccessCallMaxTotal	1.3.6.1.4.1.2516.2.8.83	INTEGER	read-only	.
INT incomingInternetSuccessCallMaxInterval	1.3.6.1.4.1.2516.2.8.84	INTEGER	read-only	.
INT incomingInternetSuccessCallAverageTotal	1.3.6.1.4.1.2516.2.8.85	INTEGER	read-only	.
INT incomingInternetSuccessCallAverageInterval	1.3.6.1.4.1.2516.2.8.86	INTEGER	read-only	.
CTR incomingInternetSuccessCallTotal	1.3.6.1.4.1.2516.2.8.87	Counter	read-only	.
INT incomingTelephonyAttemptCallValue	1.3.6.1.4.1.2516.2.8.88	INTEGER	read-only	.
CTR incomingTelephonyAttemptCallInterval	1.3.6.1.4.1.2516.2.8.89	Counter	read-only	.
INT incomingTelephonyAttemptCallMaxTotal	1.3.6.1.4.1.2516.2.8.90	INTEGER	read-only	.
INT incomingTelephonyAttemptCallMaxInterval	1.3.6.1.4.1.2516.2.8.91	INTEGER	read-only	.
INT incomingTelephonyAttemptCallAverageTotal	1.3.6.1.4.1.2516.2.8.92	INTEGER	read-only	.
INT incomingTelephonyAttemptCallAverageInterval	1.3.6.1.4.1.2516.2.8.93	INTEGER	read-only	.
CTR incomingTelephonyAttemptCallTotal	1.3.6.1.4.1.2516.2.8.94	Counter	read-only	.
INT incomingTelephonySuccessCallValue	1.3.6.1.4.1.2516.2.8.95	INTEGER	read-only	.
CTR incomingTelephonySuccessCallInterval	1.3.6.1.4.1.2516.2.8.96	Counter	read-only	.
INT incomingTelephonySuccessCallMaxTotal	1.3.6.1.4.1.2516.2.8.97	INTEGER	read-only	.
INT incomingTelephonySuccessCallMaxInterval	1.3.6.1.4.1.2516.2.8.98	INTEGER	read-only	.
INT incomingTelephonySuccessCallAverageTotal	1.3.6.1.4.1.2516.2.8.99	INTEGER	read-only	.
INT incomingTelephonySuccessCallAverageInterval	1.3.6.1.4.1.2516.2.8.100	INTEGER	read-only	.
CTR incomingTelephonySuccessCallTotal	1.3.6.1.4.1.2516.2.8.101	Counter	read-only	.
INT outgoingInternetCallValue	1.3.6.1.4.1.2516.2.8.102	INTEGER	read-only	.
CTR outgoingInternetCallInterval	1.3.6.1.4.1.2516.2.8.103	Counter	read-only	.
INT outgoingInternetCallMaxTotal	1.3.6.1.4.1.2516.2.8.104	INTEGER	read-only	.
INT outgoingInternetCallMaxInterval	1.3.6.1.4.1.2516.2.8.105	INTEGER	read-only	.
INT outgoingInternetCallAverageTotal	1.3.6.1.4.1.2516.2.8.106	INTEGER	read-only	.
INT outgoingInternetCallAverageInterval	1.3.6.1.4.1.2516.2.8.107	INTEGER	read-only	.
CTR outgoingInternetCallTotal	1.3.6.1.4.1.2516.2.8.108	Counter	read-only	.
INT outgoingTelephonyCallValue	1.3.6.1.4.1.2516.2.8.109	INTEGER	read-only	.
CTR outgoingTelephonyCallInterval	1.3.6.1.4.1.2516.2.8.110	Counter	read-only	.
INT outgoingTelephonyCallMaxTotal	1.3.6.1.4.1.2516.2.8.111	INTEGER	read-only	.
INT outgoingTelephonyCallMaxInterval	1.3.6.1.4.1.2516.2.8.112	INTEGER	read-only	.
INT outgoingTelephonyCallAverageTotal	1.3.6.1.4.1.2516.2.8.113	INTEGER	read-only	.
INT outgoingTelephonyCallAverageInterval	1.3.6.1.4.1.2516.2.8.114	INTEGER	read-only	.
CTR outgoingTelephonyCallTotal	1.3.6.1.4.1.2516.2.8.115	Counter	read-only	.
CTR accountExpiredCallTotal	1.3.6.1.4.1.2516.2.8.116	Counter	read-only	.
CTR accountExpiredCallInterval	1.3.6.1.4.1.2516.2.8.117	Counter	read-only	.
CTR vgkNotAvailableCallTotal	1.3.6.1.4.1.2516.2.8.118	Counter	read-only	.
CTR vgkNotAvailableCallInterval	1.3.6.1.4.1.2516.2.8.119	Counter	read-only	.
CTR vtgShutDownCallTotal	1.3.6.1.4.1.2516.2.8.120	Counter	read-only	.
CTR vtgShutDownCallInterval	1.3.6.1.4.1.2516.2.8.121	Counter	read-only	.
CTR vtgOutOfHoursCallTotal	1.3.6.1.4.1.2516.2.8.122	Counter	read-only	.
CTR vtgOutOfHoursCallInterval	1.3.6.1.4.1.2516.2.8.123	Counter	read-only	.
CTR vtgBusyCallTotal	1.3.6.1.4.1.2516.2.8.124	Counter	read-only	.
CTR vtgBusyCallInterval	1.3.6.1.4.1.2516.2.8.125	Counter	read-only	.
CTR vtgNoAnswerCallTotal	1.3.6.1.4.1.2516.2.8.126	Counter	read-only	.
CTR vtgNoAnswerCallInterval	1.3.6.1.4.1.2516.2.8.127	Counter	read-only	.
CTR telephoneBusyCallTotal	1.3.6.1.4.1.2516.2.8.128	Counter	read-only	.
CTR telephoneBusyCallInterval	1.3.6.1.4.1.2516.2.8.129	Counter	read-only	.
CTR telephoneNoAnswerCallTotal	1.3.6.1.4.1.2516.2.8.130	Counter	read-only	.
CTR telephoneNoAnswerCallInterval	1.3.6.1.4.1.2516.2.8.131	Counter	read-only	.
CTR miscReasonDisconnectedCallTotal	1.3.6.1.4.1.2516.2.8.132	Counter	read-only	.
CTR miscReasonDisconnectedCallInterval	1.3.6.1.4.1.2516.2.8.133	Counter	read-only	.
CTR totalDisconnectedCallsTotal	1.3.6.1.4.1.2516.2.8.134	Counter	read-only	.
CTR totalDisconnectedCallsInterval	1.3.6.1.4.1.2516.2.8.135	Counter	read-only	.
CTR vtgOutOfServiceCallTotal	1.3.6.1.4.1.2516.2.8.136	Counter	read-only	.
CTR vtgOutOfServiceCallInterval	1.3.6.1.4.1.2516.2.8.137	Counter	read-only	.
CTR unauthorizedUserCallTotal	1.3.6.1.4.1.2516.2.8.138	Counter	read-only	.
CTR unauthorizedUserCallInterval	1.3.6.1.4.1.2516.2.8.139	Counter	read-only	.
CTR resolveFailureCallTotal	1.3.6.1.4.1.2516.2.8.140	Counter	read-only	.
CTR resolveFailureCallInterval	1.3.6.1.4.1.2516.2.8.141	Counter	read-only	.
CTR pstnFailureCallTotal	1.3.6.1.4.1.2516.2.8.142	Counter	read-only	.
CTR pstnFailureCallInterval	1.3.6.1.4.1.2516.2.8.143	Counter	read-only	.
CTR abnormalTerminationCallTotal	1.3.6.1.4.1.2516.2.8.144	Counter	read-only	.
CTR abnormalTerminationCallInterval	1.3.6.1.4.1.2516.2.8.145	Counter	read-only	.
trapParameters	1.3.6.1.4.1.2516.2.9
STR telephonyErrorDescription	1.3.6.1.4.1.2516.2.9.1	DisplayString	not-accessible	Detailed description of telephony protocol error occurs. Used with telephonyError enterprise trap.

RFC description

VocalTec Telephony Gateway Server MIB for managing gateway configuration and telephony protocols.

Start monitoring video teleconferencing gateway appliance (call-routing/codec/bandwidth-allocation config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VTGW-MIB

What Is VTGW-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description