-- MIB definition for the VocalTec Telephony Gateway Server. VTGW-MIB DEFINITIONS ::= BEGIN IMPORTS TRAP-TYPE FROM RFC-1215 enterprises, Counter, Gauge, TimeTicks FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB; ------------------------------------------------------------------------------- vocaltec OBJECT IDENTIFIER ::= { enterprises 2516 } vtg OBJECT IDENTIFIER ::= { vocaltec 2 } tgw OBJECT IDENTIFIER ::= { vtg 1 } vnmvgk OBJECT IDENTIFIER ::= { vtg 2 } hasp OBJECT IDENTIFIER ::= { vtg 3 } audio OBJECT IDENTIFIER ::= { vtg 4 } ports OBJECT IDENTIFIER ::= { vtg 5 } ivr OBJECT IDENTIFIER ::= { vtg 6 } telephonyProtocols OBJECT IDENTIFIER ::= { vtg 7 } stat OBJECT IDENTIFIER ::= { vtg 8 } trapParameters OBJECT IDENTIFIER ::= { vtg 9 } analog OBJECT IDENTIFIER ::= { telephonyProtocols 1 } enm OBJECT IDENTIFIER ::= { telephonyProtocols 2 } gc OBJECT IDENTIFIER ::= { telephonyProtocols 3 } pri OBJECT IDENTIFIER ::= { telephonyProtocols 4 } erbium OBJECT IDENTIFIER ::= { telephonyProtocols 5 } -- Carbon OBJECT IDENTIFIER ::= { telephonyProtocols 6 } iridium OBJECT IDENTIFIER ::= { telephonyProtocols 7 } ------------------------------------------------------------------------------- -- Configuration Parameters-- -- VTGW (TGW) section softwareVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The VTGW software version number." ::= { tgw 1 } cti2Service OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "CTI2 service name." ::= { tgw 2 } resloveMode OBJECT-TYPE SYNTAX INTEGER { gatekeeper(1), local (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Resolving mode of the destination gateway IP address: can be done by a gatekeeper or localy at the VTGW by dialing plan." ::= { tgw 3 } telephonyProtocol OBJECT-TYPE SYNTAX INTEGER { analog (1), pri (2), enm (3), gc (4), erbium (5), carbon (6), iridium (7) } ACCESS read-write STATUS mandatory DESCRIPTION "The telephony protocol used by VTGW." ::= { tgw 4 } internetProtocol OBJECT-TYPE SYNTAX INTEGER { classic (1), h323 (2), dm3 (3), cobalt (4) } ACCESS read-write STATUS mandatory DESCRIPTION "The Internet protocol used by VTGW." ::= { tgw 5 } universalLinesNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of universal (vioce and fax capability) lines,that can be licensed on this VTGW." ::= { tgw 6 } voiceLinesNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of voice lines,that can be licensed on this VTGW." ::= { tgw 7 } faxLinesNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of fax lines,that can be licensed on this VTGW." ::= { tgw 8 } sncLinesNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of Surf & Call lines,that can be licensed on this VTGW." ::= { tgw 9 } iPhoneLinesNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of iPhone lines,that can be licensed on this VTGW." ::= { tgw 10 } dialerLinesNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of Dialer lines,that can be licensed on this VTGW." ::= { tgw 11 } cti2ServicePollingQuantum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "CTI2 service polling quantum (sec)." ::= { tgw 14 } -- VNM & VGK section rcamPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "VNM (RCAM) port." ::= { vnmvgk 1 } id OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "VGK ID." ::= { vnmvgk 2 } alias OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "VGK Alias." ::= { vnmvgk 3 } time2Live OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Time in seconds to live acknowledge to VGK." ::= { vnmvgk 5 } loginSetAttempts OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Login attempts to VGK within a set." ::= { vnmvgk 6 } timeB4LoginAttempt OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Time in seconds before the next login attempt to VGK within a set." ::= { vnmvgk 7 } timeB4LoginSet OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Time in seconds before the next login set to VGK." ::= { vnmvgk 8 } rasPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port for connecting the VGK." ::= { vnmvgk 30 } -- HASP section -- Audio section codecsPriorities OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Prioritized list of active codecs ex: 7 1 2 5 8 20" ::= { audio 1 } preferredCodec OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Preferred codec." ::= { audio 2 } outputGain OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Output volume gain." ::= { audio 3 } inputGain OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Input volume gain." ::= { audio 4 } codecsTable OBJECT-TYPE SYNTAX SEQUENCE OF CodecEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "codecs array of structures." ::= { audio 5 } codecEntry OBJECT-TYPE SYNTAX CodecEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Codec entry." INDEX { coder } ::= { codecsTable 1 } CodecEntry ::= SEQUENCE { coder INTEGER, vadEnable INTEGER, coderRate INTEGER, framesPerPkt INTEGER, framesSize INTEGER, jitter DisplayString, jitterOptFactor DisplayString, coderRedundency INTEGER } coder OBJECT-TYPE SYNTAX INTEGER { g711a(1), g711m(2), g723 (3), g729 (4), gsm (5), g726 (6), g727 (7), g728 (8), vsc (9), vhqc4800(10), vhqc5600(11), vhqc6400(12), vhqc7200(13), vhqc8000(14), vhqc8800(15), vhqc9600(16) } ACCESS read-only STATUS mandatory DESCRIPTION "Coder number." ::= { codecEntry 1 } vadEnable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "VAD enable." ::= { codecEntry 2 } coderRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Coder Rate." ::= { codecEntry 3 } framesPerPkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Frames Per Pkt." ::= { codecEntry 4 } framesSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Frames Size." ::= { codecEntry 5 } jitter OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Jitter Min. Delay." ::= { codecEntry 6 } jitterOptFactor OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Jitter Opt Factor." ::= { codecEntry 7 } coderRedundency OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "CoderRedundency." ::= { codecEntry 8 } -- Ports section portsTable OBJECT-TYPE SYNTAX SEQUENCE OF PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Ports array of structures." ::= { ports 1 } portEntry OBJECT-TYPE SYNTAX PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Port entry." INDEX { portNumber } ::= { portsTable 1 } PortEntry ::= SEQUENCE { portNumber INTEGER, portEnable INTEGER, connectedTo INTEGER, boundDirection INTEGER, dialingMode INTEGER, detectionMode INTEGER, ivrMode INTEGER, repeatIVR INTEGER, overSilenceTime INTEGER, comment DisplayString } portNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Port number." ::= { portEntry 1 } portEnable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Port enable." ::= { portEntry 2 } connectedTo OBJECT-TYPE SYNTAX INTEGER { pbx (1), pstn(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Connected to." ::= { portEntry 3 } boundDirection OBJECT-TYPE SYNTAX INTEGER { inbound (1), outbound (2), bidirectional(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Bound direction." ::= { portEntry 4 } dialingMode OBJECT-TYPE SYNTAX INTEGER { dialing-dtmf (1), dialing-pulse(2), dialing-mf (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Dialing mode." ::= { portEntry 5 } detectionMode OBJECT-TYPE SYNTAX INTEGER { detection-dtmf(1), detection-lpd (2), detection-apd (3), detection-mf (4), detection-dpd (5), detection-dpd2(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Detection mode." ::= { portEntry 6 } ivrMode OBJECT-TYPE SYNTAX INTEGER { numberphone(1), numberpin (2), phonepin (3), pbx (4), ani (5), dnis (6) } ACCESS read-write STATUS mandatory DESCRIPTION "IVR mode." ::= { portEntry 7 } repeatIVR OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Repeat IVR." ::= { portEntry 8 } overSilenceTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "OverSilence time." ::= { portEntry 9 } comment OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Comment." ::= { portEntry 10 } -- IVR section interDigitTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Inter digit timeout." ::= { ivr 1 } digitsTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Timeout for all digits." ::= { ivr 2 } -- Telephony Protocols section channelSelectionOrder OBJECT-TYPE SYNTAX INTEGER { up (1), down (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Order in which the selection is done - Up (1) or Down (2) only." ::= { telephonyProtocols 20 } glareMode OBJECT-TYPE SYNTAX INTEGER { yield (1), stand (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Glare mode selection - YIELD (1) or STAND (2) only." ::= { telephonyProtocols 21 } -- Analog section ringCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Number of rings before returning the ring event." ::= { analog 21 } volume OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Engine volume control." ::= { analog 22 } -- EnM section idle OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Idle bits, default=00--" ::= { enm 1 } outOfService OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Out Of Service bits, default=1101" ::= { enm 2 } seizeOutbound OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Seize Outbound bits, default=11--" ::= { enm 3 } seizeInbound OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Seize Inbound bits, default=11--" ::= { enm 4 } seizeAckOutbound OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Seize Acknowledge Outbound bits, default=W---" ::= { enm 5 } seizeAckInbound OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Seize Acknowledge Inbound bits, default=W---" ::= { enm 6 } answerOutbound OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Answer Outbound bits, default=11--" ::= { enm 7 } answerInbound OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Answer Inbound bits, default=11--" ::= { enm 8 } dropOutbound OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Drop Outbound bits, default=00--" ::= { enm 9 } dropInbound OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Drop Inbound bits, , default=00--" ::= { enm 10 } noAnswerSec OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Length of time to wait after first ring back before deciding that the call isn't answered, in 10 mSec, default=3000." ::= { enm 11 } continuesNoSignal OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The max. length of time that no ringback was returned, in 10 mSec, default=4000." ::= { enm 12 } helloEdge OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "When to tell the app. that the remote connected, 1=Rising Endge - Immediately when connect is detected, 2=Falling Endge - After the end of the solution." ::= { enm 13 } maxInterRing OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The max time between ring backs to decide that the call connected, in 10 mSec, default=800." ::= { enm 14 } dialToneLocal OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Local Dial tone, default= ." ::= { enm 15 } dialToneIntl OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "International Dial tone, default= ." ::= { enm 16 } dialToneXtra OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Extra Dial tone, default= ." ::= { enm 17 } busy1Tone OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Busy 1 tone, default= ." ::= { enm 18 } busy2Tone OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Busy 2 tone, default= ." ::= { enm 19 } ringback1Tone OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Ringback 1 tone, default= ." ::= { enm 20 } ringback2Tone OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Ringback 2 tone, default= ." ::= { enm 21 } disconnect1Tone OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Disconnect 1 tone, default= ." ::= { enm 22 } disconnect2Tone OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Disconnect 2 tone, default= ." ::= { enm 23 } waitForDropAckTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The time to wait for drop ack, in mSec, default=2000." ::= { enm 24 } waitForSiezeAckTimer OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The time to wait for sieze ack, in mSec, default=10000." ::= { enm 25 } digitsMode OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The pormat of sending the digits - 'T'=DTMF, 'M'=MF, 'P'=PULSE, default='T'." ::= { enm 26 } isDnisBeforeAni OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Does the ANI is previous to the DNIS, if 1(TRUE) - DNIS is before the ANI, default=1(TRUE)." ::= { enm 27 } collectAni OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Should the engine expect ANI. Default=1(TRUE)" ::= { enm 28 } prewinkLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The max. length in 10mSec of the pre-wink. Default=0" ::= { enm 29 } winkLength OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The max. length of the wink generation, in 10 mSec. Default=15" ::= { enm 30 } minWinkDetection OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The min. time in the receiver for detecting the wink, in 10 mSec. Default=10" ::= { enm 31 } maxWinkDetection OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The max. time in the receiver for detecting the wink, in 10 mSec. Default=32" ::= { enm 32 } maxDigitsDnis OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The max. # of DNIS digits for the receiver/transmiter. The max. # of digits for the DNIS+ANI in hardware dependenc-31." ::= { enm 33 } maxDigitsAni OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The max.# of ANI digits for the receiver/transmiter. The max.# of digits for the DNIS+ANI in hardware dependenc-31." ::= { enm 34 } minTimeToDetectTransition OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The min. time to detect transition from 0 to 1 and from 1 to 0, in 10mSec. Default=5 (max. value is 255)" ::= { enm 35 } charBeforedigits OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "the character before the digits, Default - '*', if there isnt any '' will be used" ::= { enm 36 } charBetweenAniAndDnis OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "If there is ANI - this is the char between the DNIS and the ANI, Default - '*', if there isnt any '' will be used" ::= { enm 37 } charInTheEndOfDigits OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The char in the end of digits, Default - '*', if there isnt any '' will be used" ::= { enm 38 } sendCharBeforeDigits OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The char before the digits, Default - '*', if there isnt any '' will be used" ::= { enm 39 } sendDnisbeforeAni OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Does ANI is previous to the DNIS, if TRUE DNIS will be sent before the ANI, default DNIS before the ANI" ::= { enm 40 } sendCharBetweenAniAndDnis OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "If there is ANI - this is the char between the DNIS and the ANI, Default - '*', if there isnt any '' will be used" ::= { enm 41 } sendCharcharInTheEndOfDigits OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The char in the end of the digits, Default - '*', if there isnt any '' will be used" ::= { enm 42 } fileToPlay OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Path+name of .WAV file to play to user in case of Clear-Back." ::= { enm 43 } repeatPlayFile OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Loop the playing of the Clear-Back .WAV file - '0' or '1' only." ::= { enm 44 } -- Global Call (GC) section protocolConfigFileIn OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Protocol config file in." ::= { gc 1 } protocolConfigFileOut OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Protocol config file out." ::= { gc 2 } listOfProtocolConfigFilesIn OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A list of the possible protocol config files in." ::= { gc 3 } listOfProtocolConfigFilesOut OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A list of the possible protocol config files out." ::= { gc 4 } -- PRI section --ISDNSetupMessage OBJECT-TYPE -- SYNTAX DisplayString -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION "String of prameters according to the utility. Default = ?" --::= { pri 3 } protocolTrace OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Activating Dialogic PRI log tracer." ::= { pri 2 } -- iridium section hostID OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "SS#7 host ID can be from 0-31. Default = 0." ::= { iridium 2 } sIUIPorID OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "SIU IP address or ID." ::= { iridium 3 } --------------------------------------------------------------------------- -- Statistics timeUpTotal OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Time up total." ::= { stat 1 } timeUpInterval OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Time up interval." ::= { stat 2 } timeSpanTotal OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Time span total." ::= { stat 3 } timeSpanInterval OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Time span interval." ::= { stat 4 } vgkLoginAttemptTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper login attempt total." ::= { stat 5 } vgkLoginAttemptInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper login attempt interval." ::= { stat 6 } vgkLoginSuccessTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper login success total." ::= { stat 7 } vgkLoginSuccessInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper login success interval." ::= { stat 8 } vgkLoginFailureTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper login failure total." ::= { stat 9 } vgkLoginFailureInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper login failure interval." ::= { stat 10 } vgkLogoutAttemptTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper logout attempt total." ::= { stat 11 } vgkLogoutAttemptInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper logout attempt interval." ::= { stat 12 } vgkLogoutSuccessTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper logout success total." ::= { stat 13 } vgkLogoutSuccessInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper logout success interval." ::= { stat 14 } vgkLogoutFailureTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper logout failure total." ::= { stat 15 } vgkLogoutFailureInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper logout failure interval." ::= { stat 16 } vgkDisconnectionTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper disconnection failure total." ::= { stat 17 } vgkDisconnectionInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "GateKeeper disconnection failure interval." ::= { stat 18 } callValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Calls value." ::= { stat 19 } callInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Calls interval." ::= { stat 20 } callMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Calls max total." ::= { stat 21 } callMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Calls max interval." ::= { stat 22 } callAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Calls average total." ::= { stat 23 } callAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Calls average interval." ::= { stat 24 } callTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Calls total." ::= { stat 25 } universalCallValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Universal calls value." ::= { stat 26 } universalCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Universal calls interval." ::= { stat 27 } universalCallMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Universal calls max total." ::= { stat 28 } universalCallMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Universal calls max interval." ::= { stat 29 } universalCallAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Universal calls average total." ::= { stat 30 } universalCallAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Universal calls average interval." ::= { stat 31 } universalCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Universal calls total." ::= { stat 32 } voiceCallValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Voice calls value." ::= { stat 33 } voiceCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Voice calls interval." ::= { stat 34 } voiceCallMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Voice calls max total." ::= { stat 35 } voiceCallMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Voice calls max interval." ::= { stat 36 } voiceCallAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Voice calls average total." ::= { stat 37 } voiceCallAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Voice calls average interval." ::= { stat 38 } voiceCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Voice calls total." ::= { stat 39 } faxCallValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fax calls value." ::= { stat 40 } faxCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Fax calls interval." ::= { stat 41 } faxCallMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fax calls max total." ::= { stat 42 } faxCallMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fax calls max interval." ::= { stat 43 } faxCallAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fax calls average total." ::= { stat 44 } faxCallAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Fax calls average interval." ::= { stat 45 } faxCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Fax calls total." ::= { stat 46 } sncCallValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "S&C calls value." ::= { stat 47 } sncCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "S&C calls interval." ::= { stat 48 } sncCallMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "S&C calls max total." ::= { stat 49 } sncCallMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "S&C calls max interval." ::= { stat 50 } sncCallAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "S&C calls average total." ::= { stat 51 } sncCallAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "S&C calls average interval." ::= { stat 52 } sncCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "S&C calls total." ::= { stat 53 } iPhoneCallValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "iPhone calls value." ::= { stat 54 } iPhoneCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "iPhone calls interval." ::= { stat 55 } iPhoneCallMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "iPhone calls max total." ::= { stat 56 } iPhoneCallMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "iPhone calls max interval." ::= { stat 57 } iPhoneCallAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "iPhone calls average total." ::= { stat 58 } iPhoneCallAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "iPhone calls average interval." ::= { stat 59 } iPhoneCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "iPhone calls total." ::= { stat 60 } dialerCallValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dialer calls value." ::= { stat 61 } dialerCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Dialer calls interval." ::= { stat 62 } dialerCallMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dialer calls max total." ::= { stat 63 } dialerCallMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dialer calls max interval." ::= { stat 64 } dialerCallAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dialer calls average total." ::= { stat 65 } dialerCallAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Dialer calls average interval." ::= { stat 66 } dialerCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Dialer calls total." ::= { stat 67 } incorrectPasswordCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "incorrect password calls total." ::= { stat 68 } incorrectPasswordCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "incorrect password calls interval." ::= { stat 69 } notSupportedCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "not supported calls total." ::= { stat 72 } notSupportedCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "not supported calls interval." ::= { stat 73 } incomingInternetAttemptCallValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 74 } incomingInternetAttemptCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 75 } incomingInternetAttemptCallMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 76 } incomingInternetAttemptCallMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 77 } incomingInternetAttemptCallAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 78 } incomingInternetAttemptCallAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 79 } incomingInternetAttemptCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 80 } incomingInternetSuccessCallValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 81 } incomingInternetSuccessCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 82 } incomingInternetSuccessCallMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 83 } incomingInternetSuccessCallMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 84 } incomingInternetSuccessCallAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 85 } incomingInternetSuccessCallAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 86 } incomingInternetSuccessCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 87 } incomingTelephonyAttemptCallValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 88 } incomingTelephonyAttemptCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 89 } incomingTelephonyAttemptCallMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 90 } incomingTelephonyAttemptCallMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 91 } incomingTelephonyAttemptCallAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 92 } incomingTelephonyAttemptCallAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 93 } incomingTelephonyAttemptCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 94 } incomingTelephonySuccessCallValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 95 } incomingTelephonySuccessCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 96 } incomingTelephonySuccessCallMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 97 } incomingTelephonySuccessCallMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 98 } incomingTelephonySuccessCallAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 99 } incomingTelephonySuccessCallAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 100 } incomingTelephonySuccessCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 101} outgoingInternetCallValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 102} outgoingInternetCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 103 } outgoingInternetCallMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 104 } outgoingInternetCallMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 105} outgoingInternetCallAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 106 } outgoingInternetCallAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 107 } outgoingInternetCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 108 } outgoingTelephonyCallValue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 109 } outgoingTelephonyCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 110} outgoingTelephonyCallMaxTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 111 } outgoingTelephonyCallMaxInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 112 } outgoingTelephonyCallAverageTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 113 } outgoingTelephonyCallAverageInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 114 } outgoingTelephonyCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 115 } accountExpiredCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 116 } accountExpiredCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 117 } vgkNotAvailableCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 118 } vgkNotAvailableCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 119 } vtgShutDownCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 120 } vtgShutDownCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 121 } vtgOutOfHoursCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 122 } vtgOutOfHoursCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 123 } vtgBusyCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 124 } vtgBusyCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 125 } vtgNoAnswerCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 126 } vtgNoAnswerCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 127 } telephoneBusyCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 128 } telephoneBusyCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 129 } telephoneNoAnswerCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 130 } telephoneNoAnswerCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 131 } miscReasonDisconnectedCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 132 } miscReasonDisconnectedCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 133 } totalDisconnectedCallsTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 134 } totalDisconnectedCallsInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 135 } vtgOutOfServiceCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 136 } vtgOutOfServiceCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 137 } unauthorizedUserCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 138 } unauthorizedUserCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 139 } resolveFailureCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 140 } resolveFailureCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 141 } pstnFailureCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 142 } pstnFailureCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 143 } abnormalTerminationCallTotal OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 144 } abnormalTerminationCallInterval OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "." ::= { stat 145 } -- Trap parameters telephonyErrorDescription OBJECT-TYPE SYNTAX DisplayString ACCESS not-accessible STATUS mandatory DESCRIPTION "Detailed description of telephony protocol error occurs. Used with telephonyError enterprise trap." ::= { trapParameters 1 } ------------------------------------------------------------------------------ -- Traps section setParameterFailure TRAP-TYPE ENTERPRISE vtg DESCRIPTION "Setting parameter failed." ::= 1 haspExistance TRAP-TYPE ENTERPRISE vtg DESCRIPTION "HASP existance failed." ::= 2 cti2ServiceFailure TRAP-TYPE ENTERPRISE vtg DESCRIPTION "CTI2 service failed." ::= 3 vgkLoginFailure TRAP-TYPE ENTERPRISE vtg DESCRIPTION "VTG has failed to login to VGK." ::= 4 vgkLogoutFailure TRAP-TYPE ENTERPRISE vtg DESCRIPTION "VTG has failed to logout from VGK." ::= 5 vgkDisconnection TRAP-TYPE ENTERPRISE vtg DESCRIPTION "VTG disconnected from VGK." ::= 6 telephonyError TRAP-TYPE ENTERPRISE vtg VARIABLES { telephonyErrorDescription } DESCRIPTION "Telephony error." ::= 7 incorrectPasswordCalls TRAP-TYPE ENTERPRISE vtg DESCRIPTION "Incorrect password call." ::= 8 disconnectedCalls TRAP-TYPE ENTERPRISE vtg DESCRIPTION "Disconnected call." ::= 9 notSupportedCalls TRAP-TYPE ENTERPRISE vtg DESCRIPTION "Not supported Call." ::= 10 ------------------------------------------------------------------------------- END