VERTIV-V5-MIB

All MIBs › VERTIV-V5-MIB

Organization: Vertiv

Last Updated: 2020-01-07

Category: Power and Environmental Monitoring

Description: Tracks Vertiv V5 power and cooling infrastructure, including UPS units, PDUs, and thermal management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VERTIV-V5-MIB?

VERTIV-V5-MIB is a vendor MIB from Vertiv (formerly Emerson Network Power) covering the "V5" product platform, used to manage power and cooling infrastructure such as UPS, PDU, and thermal management units. It exposes device identity and inventory data (product title, version, model, part and serial numbers, MAC address, hostname, platform) alongside environmental data such as temperature units and device counts. Its monitoring role centers on hardware/software status of the power/cooling device itself — firmware/software version tracking via productVersion, hardware identification via productSerialNumber/productModelNumber, and environmental conditions via temperature-related objects, useful for verifying device identity and health during fleet management. No explicit dependency on other MIBs is indicated; it appears to be a self-contained vendor MIB. It is typically deployed on Vertiv UPS, PDU, and precision cooling/thermal management units in data center and telecom facilities. Network engineers evaluating or troubleshooting this functionality can download the VERTIV-V5-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VERTIV-V5-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Vertiv UPS units
Vertiv PDUs
Vertiv precision cooling/thermal management systems

Monitoring Examples

An administrator would poll productFriendlyName, productModelNumber, productSerialNumber, and productVersion under deviceInfo to confirm firmware version and hardware identity of a Vertiv V5 unit, and check temperatureUnits together with deviceCount to validate the number of managed sub-devices reporting into the imd (intelligent monitoring device) subtree. A mismatch between expected productVersion and the polled value would flag a unit running outdated firmware needing an update.

What Can Be Monitored

product/firmware version
product model and serial number
device hostname and MAC address
temperature units
managed device count

Imported Objects

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-MIB

sysName

OBJECT-TYPE

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
MacAddress
TruthValue

How to Use in IPNetwork Monitor

Example using pduMainAvail OID:

Select a Vertiv UPS units, Vertiv PDUs, Vertiv precision cooling/thermal management system (identity/firmware/temperature status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type pduMainAvail into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the device availability: 0 = Unavailable 1 = Available 2 = Partially Unavailable. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline, since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
vertiv	1.3.6.1.4.1.21239			The MIB for Vertiv products
v5	1.3.6.1.4.1.21239.5
imd	1.3.6.1.4.1.21239.5.2
deviceInfo	1.3.6.1.4.1.21239.5.2.1
STR productTitle	1.3.6.1.4.1.21239.5.2.1.1	SnmpAdminString	read-only	Product name
STR productVersion	1.3.6.1.4.1.21239.5.2.1.2	SnmpAdminString	read-only	Product version
STR productFriendlyName	1.3.6.1.4.1.21239.5.2.1.3	SnmpAdminString	read-only	User-assigned name
MAC productMacAddress	1.3.6.1.4.1.21239.5.2.1.4	MacAddress	read-only	Product's unique MAC address
I32 deviceCount	1.3.6.1.4.1.21239.5.2.1.6	Integer32	read-only	Total number of devices on unit
INT temperatureUnits	1.3.6.1.4.1.21239.5.2.1.7	INTEGER	read-write	Current units for temperature/dewpoint values: 0 = Degrees Fahrenheit 1 = Degrees Celsius
STR productModelNumber	1.3.6.1.4.1.21239.5.2.1.8	SnmpAdminString	read-only	Product model number (factory-assigned)
STR productPartNumber	1.3.6.1.4.1.21239.5.2.1.9	SnmpAdminString	read-only	Product part number (factory-assigned)
STR productSerialNumber	1.3.6.1.4.1.21239.5.2.1.10	SnmpAdminString	read-only	Product serial number (factory-assigned)
STR productPlatform	1.3.6.1.4.1.21239.5.2.1.11	SnmpAdminString	read-only	Product platform
STR productHostname	1.3.6.1.4.1.21239.5.2.1.12	SnmpAdminString	read-only	Product hostname
I32 productAlarmCount	1.3.6.1.4.1.21239.5.2.1.13	Integer32	read-only	Number of alarms currently tripped
I32 productWarnCount	1.3.6.1.4.1.21239.5.2.1.14	Integer32	read-only	Number of warnings currently tripped
STR productManufacturer	1.3.6.1.4.1.21239.5.2.1.15	SnmpAdminString	read-only	Product manufacturer
pdu	1.3.6.1.4.1.21239.5.2.3
pduMainTable	1.3.6.1.4.1.21239.5.2.3.1		not-accessible	PDU general information
pduMainEntry	1.3.6.1.4.1.21239.5.2.3.1.1		not-accessible	Entry in the pduMainTable table: each entry contains an index and other sensor details
I32 pduMainIndex	1.3.6.1.4.1.21239.5.2.3.1.1.1	Integer32	not-accessible	Table entry index value
STR pduMainSerial	1.3.6.1.4.1.21239.5.2.3.1.1.2	DisplayString	read-only	Serial number
STR pduMainName	1.3.6.1.4.1.21239.5.2.3.1.1.3	SnmpAdminString	read-only	PDU name (factory-assigned)
STR pduMainLabel	1.3.6.1.4.1.21239.5.2.3.1.1.4	SnmpAdminString	read-write	PDU label (user-defined)
G32 pduMainAvailEx	1.3.6.1.4.1.21239.5.2.3.1.1.5	Gauge32	read-only	Device availability: 0 = Unavailable 1 = Available 2 = Partially Unavailable
INT pduMeterType	1.3.6.1.4.1.21239.5.2.3.1.1.6	INTEGER	read-only	Current meter type: 0 = Wye 1 = Delta
STR pduTotalName	1.3.6.1.4.1.21239.5.2.3.1.1.7	SnmpAdminString	read-only	Total name (factory-assigned)
STR pduTotalLabel	1.3.6.1.4.1.21239.5.2.3.1.1.8	SnmpAdminString	read-write	Total label (user-defined)
G32 pduTotalRealPower	1.3.6.1.4.1.21239.5.2.3.1.1.9	Gauge32	read-only	PDU total real power
G32 pduTotalApparentPower	1.3.6.1.4.1.21239.5.2.3.1.1.10	Gauge32	read-only	PDU total apparent power
G32 pduTotalPowerFactor	1.3.6.1.4.1.21239.5.2.3.1.1.11	Gauge32	read-only	PDU total power factor
G32 pduTotalEnergy	1.3.6.1.4.1.21239.5.2.3.1.1.12	Gauge32	read-only	PDU total accumulated energy in watt-hours
pduPhaseTable	1.3.6.1.4.1.21239.5.2.3.2		not-accessible	PDU phases information
pduPhaseEntry	1.3.6.1.4.1.21239.5.2.3.2.1		not-accessible	Entry in the pduPhaseTable table: each entry contains an index and other sensor details
I32 pduPhaseIndex	1.3.6.1.4.1.21239.5.2.3.2.1.1	Integer32	not-accessible	Table entry index value
STR pduPhaseName	1.3.6.1.4.1.21239.5.2.3.2.1.2	SnmpAdminString	read-only	PDU phase name (factory-assigned)
STR pduPhaseLabel	1.3.6.1.4.1.21239.5.2.3.2.1.3	SnmpAdminString	read-write	PDU phase label (user-defined)
G32 pduPhaseVoltage	1.3.6.1.4.1.21239.5.2.3.2.1.4	Gauge32	read-only	PDU phase voltage in tenths of a volt
G32 pduPhaseCurrent	1.3.6.1.4.1.21239.5.2.3.2.1.8	Gauge32	read-only	PDU phase current reading in hundredths of an amp
G32 pduPhaseRealPower	1.3.6.1.4.1.21239.5.2.3.2.1.12	Gauge32	read-only	Real power for phase in watts
G32 pduPhaseApparentPower	1.3.6.1.4.1.21239.5.2.3.2.1.13	Gauge32	read-only	Apparent power for phase in volt-amps
G32 pduPhasePowerFactor	1.3.6.1.4.1.21239.5.2.3.2.1.14	Gauge32	read-only	Power factor for phase
G32 pduPhaseEnergy	1.3.6.1.4.1.21239.5.2.3.2.1.15	Gauge32	read-only	Accumulated energy for phase in watt-hours
G32 pduPhaseBalance	1.3.6.1.4.1.21239.5.2.3.2.1.17	Gauge32	read-only	Phase balance as percent
G32 pduPhaseCurrentCrestFactor	1.3.6.1.4.1.21239.5.2.3.2.1.19	Gauge32	read-only	Current crest factor for phase, in hundredths
pduBreakerTable	1.3.6.1.4.1.21239.5.2.3.3		not-accessible	PDU breaker information
pduBreakerEntry	1.3.6.1.4.1.21239.5.2.3.3.1		not-accessible	Entry in the pduBreakerTable table: each entry contains an index and other sensor details
I32 pduBreakerIndex	1.3.6.1.4.1.21239.5.2.3.3.1.1	Integer32	not-accessible	Table entry index value
STR pduBreakerName	1.3.6.1.4.1.21239.5.2.3.3.1.2	SnmpAdminString	read-only	PDU breaker name (factory-assigned)
STR pduBreakerLabel	1.3.6.1.4.1.21239.5.2.3.3.1.3	SnmpAdminString	read-write	PDU breaker label (user-defined)
G32 pduBreakerCurrent	1.3.6.1.4.1.21239.5.2.3.3.1.4	Gauge32	read-only	PDU breaker current reading in hundredths of an amp
G32 pduBreakerVoltage	1.3.6.1.4.1.21239.5.2.3.3.1.8	Gauge32	read-only	PDU breaker voltage in tenths of a volt. This object may not exist on all platforms, due to hardware differences.
G32 pduBreakerRealPower	1.3.6.1.4.1.21239.5.2.3.3.1.12	Gauge32	read-only	Real power for breaker in watts. This object may not exist on all platforms, due to hardware differences.
G32 pduBreakerApparentPower	1.3.6.1.4.1.21239.5.2.3.3.1.13	Gauge32	read-only	Apparent power for breaker in volt-amps. This object may not exist on all platforms, due to hardware differences.
G32 pduBreakerPowerFactor	1.3.6.1.4.1.21239.5.2.3.3.1.14	Gauge32	read-only	Power factor for breaker. This object may not exist on all platforms, due to hardware differences.
G32 pduBreakerEnergy	1.3.6.1.4.1.21239.5.2.3.3.1.15	Gauge32	read-only	Accumulated energy for breaker in watt-hours. This object may not exist on all platforms, due to hardware differences.
pduLineTable	1.3.6.1.4.1.21239.5.2.3.4		not-accessible	PDU line current information
pduLineEntry	1.3.6.1.4.1.21239.5.2.3.4.1		not-accessible	Entry in the pduLineTable table: each entry contains an index and other sensor details
I32 pduLineIndex	1.3.6.1.4.1.21239.5.2.3.4.1.1	Integer32	not-accessible	Table entry index value
STR pduLineName	1.3.6.1.4.1.21239.5.2.3.4.1.2	SnmpAdminString	read-only	PDU line name (factory-assigned)
STR pduLineLabel	1.3.6.1.4.1.21239.5.2.3.4.1.3	SnmpAdminString	read-write	PDU line label (user-defined)
G32 pduLineCurrent	1.3.6.1.4.1.21239.5.2.3.4.1.4	Gauge32	read-only	PDU line current reading in hundredths of an amp
pduOutletSwitchTable	1.3.6.1.4.1.21239.5.2.3.5		not-accessible	Data, config and control for outlets with switching
pduOutletSwitchEntry	1.3.6.1.4.1.21239.5.2.3.5.1		not-accessible	Entry in the pduOutletSwitchTable table: each entry contains an index and other sensor details
I32 pduOutletSwitchIndex	1.3.6.1.4.1.21239.5.2.3.5.1.1	Integer32	not-accessible	Table entry index value
STR pduOutletSwitchName	1.3.6.1.4.1.21239.5.2.3.5.1.2	SnmpAdminString	read-only	PDU outlet name (factory-assigned)
STR pduOutletSwitchLabel	1.3.6.1.4.1.21239.5.2.3.5.1.3	SnmpAdminString	read-write	PDU outlet label (user-defined)
INT pduOutletSwitchState	1.3.6.1.4.1.21239.5.2.3.5.1.4	INTEGER	read-only	Switch state of the outlet: 1 = Outlet is on 2 = Outlet is off 3 = Outlet is on, but will turn off after a delay 4 = Outlet is off, but will turn on after a delay 5 = Starting reboot cycle, outlet is on, but will go to the rebootOff(6) state after a delay 6 = Rebooting, outlet is off, but it will turn on after a delay 7 = Cannot get outlet state
T/F pduOutletSwitchRelayFailure	1.3.6.1.4.1.21239.5.2.3.5.1.5	TruthValue	read-only	Tells if the outlet relay has failed. In normal operation, the value will be false(2).
INT pduOutletSwitchControl	1.3.6.1.4.1.21239.5.2.3.5.1.6	INTEGER	read-write	Used for manual control of the outlet. If the outlet is in manual mode, this field can be set to one of the following values: 1 = Cancel pending operation 2 = Turn outlet on 3 = After delay (pduOutletSwitchOnDelay), turn outlet on 4 = Turn outlet off 5 = After delay (pduOutletSwitchOffDelay), turn outlet off 6 = Reboot: turn off, delay (pduOutletSwitchRebootHoldDelay), turn outlet back on 7 = After delay (pduOutletSwitchRebootDelay), reboot outlet When not in manual mode, setting this field will give an inconsistentValue error. Returns none(8) for all get requests.
I32 pduOutletSwitchTimeToAction	1.3.6.1.4.1.21239.5.2.3.5.1.7	Integer32	read-only	Seconds until an outlet state change. The value of pduOutletSwitchState tells what state the outlet will be set, after the delay.
I32 pduOutletSwitchOnDelay	1.3.6.1.4.1.21239.5.2.3.5.1.8	Integer32	read-write	Seconds to wait before powering on the outlet, during onAfterDelay(3) operation. Changing this value has no effect on pending actions.
I32 pduOutletSwitchOffDelay	1.3.6.1.4.1.21239.5.2.3.5.1.9	Integer32	read-write	Seconds to wait before powering off the outlet, during offAfterDelay(5) operation. Changing this value has no effect on pending actions.
I32 pduOutletSwitchRebootDelay	1.3.6.1.4.1.21239.5.2.3.5.1.10	Integer32	read-write	Seconds to wait before powering off the outlet, during rebootAfterDelay(7) operation. Changing this value has no effect on pending actions. See pduOutletSwitchControl for more info.
I32 pduOutletSwitchRebootHoldDelay	1.3.6.1.4.1.21239.5.2.3.5.1.11	Integer32	read-write	Seconds to hold the outlet off, before powering on the outlet, during rebootAfterDelay(7) operation. Changing this value has no effect on pending actions. See pduOutletSwitchControl for more info.
INT pduOutletSwitchPoaAction	1.3.6.1.4.1.21239.5.2.3.5.1.12	INTEGER	read-write	The outlet is set to this state during power-up. The action can be have one the following values: 1 = Outlet will be turned on 2 = Outlet will stay off 3 = Outlet will be set to last known state
I32 pduOutletSwitchPoaDelay	1.3.6.1.4.1.21239.5.2.3.5.1.13	Integer32	read-write	Seconds to wait before setting the outlet to the pduOutletSwitchPoaAction state. The delay starts at power-up.
pduOutletMeterTable	1.3.6.1.4.1.21239.5.2.3.6		not-accessible	Metering data for outlets that support this feature
pduOutletMeterEntry	1.3.6.1.4.1.21239.5.2.3.6.1		not-accessible	Entry in the pduOutletMeterTable table: each entry contains an index and other sensor details
I32 pduOutletMeterIndex	1.3.6.1.4.1.21239.5.2.3.6.1.1	Integer32	not-accessible	Table entry index value
STR pduOutletMeterName	1.3.6.1.4.1.21239.5.2.3.6.1.2	SnmpAdminString	read-only	PDU outlet name (factory-assigned)
STR pduOutletMeterLabel	1.3.6.1.4.1.21239.5.2.3.6.1.3	SnmpAdminString	read-write	PDU outlet label (user-defined)
G32 pduOutletMeterVoltage	1.3.6.1.4.1.21239.5.2.3.6.1.4	Gauge32	read-only	PDU outlet voltage in tenths of a volt
G32 pduOutletMeterCurrent	1.3.6.1.4.1.21239.5.2.3.6.1.8	Gauge32	read-only	PDU outlet current reading in hundredths of an amp
G32 pduOutletMeterRealPower	1.3.6.1.4.1.21239.5.2.3.6.1.12	Gauge32	read-only	Real power for outlet in watts
G32 pduOutletMeterApparentPower	1.3.6.1.4.1.21239.5.2.3.6.1.13	Gauge32	read-only	Apparent power for outlet in volt-amps
G32 pduOutletMeterPowerFactor	1.3.6.1.4.1.21239.5.2.3.6.1.14	Gauge32	read-only	Power factor for outlet
G32 pduOutletMeterEnergy	1.3.6.1.4.1.21239.5.2.3.6.1.15	Gauge32	read-only	Accumulated energy for outlet in watt-hours
INT pduOutletMeterReset	1.3.6.1.4.1.21239.5.2.3.6.1.16	INTEGER	read-write	Used to reset energy. If read, the value is none(8). It can be set to resetEnergy(1), which sets outlet energy to 0
G32 pduOutletCurrentCrestFactor	1.3.6.1.4.1.21239.5.2.3.6.1.19	Gauge32	read-only	Current crest factor for outlet, in hundredths
tempSensorTable	1.3.6.1.4.1.21239.5.2.4		not-accessible	Remote Temperature (RT) sensor
tempSensorEntry	1.3.6.1.4.1.21239.5.2.4.1		not-accessible	Entry in the tempSensorTable table: each entry contains an index and other sensor details
I32 tempSensorIndex	1.3.6.1.4.1.21239.5.2.4.1.1	Integer32	not-accessible	Table entry index value
STR tempSensorSerial	1.3.6.1.4.1.21239.5.2.4.1.2	DisplayString	read-only	Serial number
STR tempSensorLabel	1.3.6.1.4.1.21239.5.2.4.1.3	SnmpAdminString	read-write	User-defined label
G32 tempSensorAvail	1.3.6.1.4.1.21239.5.2.4.1.4	Gauge32	read-only	Device availability: 0 = Unavailable 1 = Available 2 = Partially Unavailable
I32 tempSensorTemp	1.3.6.1.4.1.21239.5.2.4.1.5	Integer32	read-only	Temperature in tenths of a degree. Units are given by temperatureUnits field in deviceInfo.
airFlowSensorTable	1.3.6.1.4.1.21239.5.2.5		not-accessible	Remote Airflow, Humidity, Temperature and Dewpoint (AFHT3) Sensor
airFlowSensorEntry	1.3.6.1.4.1.21239.5.2.5.1		not-accessible	Entry in the airFlowSensorTable table: each entry contains an index and other sensor details
I32 airFlowSensorIndex	1.3.6.1.4.1.21239.5.2.5.1.1	Integer32	not-accessible	Table entry index value
STR airFlowSensorSerial	1.3.6.1.4.1.21239.5.2.5.1.2	DisplayString	read-only	Serial number
STR airFlowSensorLabel	1.3.6.1.4.1.21239.5.2.5.1.3	SnmpAdminString	read-write	User-defined label
G32 airFlowSensorAvail	1.3.6.1.4.1.21239.5.2.5.1.4	Gauge32	read-only	Device availability: 0 = Unavailable 1 = Available 2 = Partially Unavailable
I32 airFlowSensorTemp	1.3.6.1.4.1.21239.5.2.5.1.5	Integer32	read-only	Temperature reading in tenths of a degree. Units are given by temperatureUnits field in deviceInfo.
I32 airFlowSensorFlow	1.3.6.1.4.1.21239.5.2.5.1.6	Integer32	read-only	Airflow reading. Still air will be less than 20, while rushing air will be around 100.
I32 airFlowSensorHumidity	1.3.6.1.4.1.21239.5.2.5.1.7	Integer32	read-only	Humidity reading
I32 airFlowSensorDewPoint	1.3.6.1.4.1.21239.5.2.5.1.8	Integer32	read-only	Dewpoint reading in tenths of a degree. Units are given by temperatureUnits field in deviceInfo.
t3hdSensorTable	1.3.6.1.4.1.21239.5.2.8		not-accessible	Remote Temperature x 3, Humidity and Dewpoint Sensor
t3hdSensorEntry	1.3.6.1.4.1.21239.5.2.8.1		not-accessible	Entry in the t3hdSensorTable table: each entry contains an index and other sensor details
I32 t3hdSensorIndex	1.3.6.1.4.1.21239.5.2.8.1.1	Integer32	not-accessible	Table entry index value
STR t3hdSensorSerial	1.3.6.1.4.1.21239.5.2.8.1.2	DisplayString	read-only	Serial number
STR t3hdSensorLabel	1.3.6.1.4.1.21239.5.2.8.1.3	SnmpAdminString	read-write	User-defined label
G32 t3hdSensorAvail	1.3.6.1.4.1.21239.5.2.8.1.4	Gauge32	read-only	Device availability: 0 = Unavailable 1 = Available 2 = Partially Unavailable
STR t3hdSensorIntLabel	1.3.6.1.4.1.21239.5.2.8.1.5	SnmpAdminString	read-write	Internal label (user-defined)
I32 t3hdSensorIntTemp	1.3.6.1.4.1.21239.5.2.8.1.6	Integer32	read-only	Internal temperature in tenths of a degree. Units are given by temperatureUnits field in deviceInfo.
I32 t3hdSensorIntHumidity	1.3.6.1.4.1.21239.5.2.8.1.7	Integer32	read-only	Internal humidity
I32 t3hdSensorIntDewPoint	1.3.6.1.4.1.21239.5.2.8.1.8	Integer32	read-only	Internal dewpoint in tenths of a degree. Units are given by temperatureUnits field in deviceInfo.
G32 t3hdSensorExtAAvail	1.3.6.1.4.1.21239.5.2.8.1.9	Gauge32	read-only	External A status: 0 = Unavailable 1 = Available
STR t3hdSensorExtALabel	1.3.6.1.4.1.21239.5.2.8.1.10	SnmpAdminString	read-write	External A label (user-defined)
I32 t3hdSensorExtATemp	1.3.6.1.4.1.21239.5.2.8.1.11	Integer32	read-only	External A temperature in tenths of a degree. Units are given by temperatureUnits field in deviceInfo.
G32 t3hdSensorExtBAvail	1.3.6.1.4.1.21239.5.2.8.1.12	Gauge32	read-only	External B status: 0 = Unavailable 1 = Available
STR t3hdSensorExtBLabel	1.3.6.1.4.1.21239.5.2.8.1.13	SnmpAdminString	read-write	External B label (user-defined)
I32 t3hdSensorExtBTemp	1.3.6.1.4.1.21239.5.2.8.1.14	Integer32	read-only	External B temperature in tenths of a degree. Units are given by temperatureUnits field in deviceInfo.
thdSensorTable	1.3.6.1.4.1.21239.5.2.9		not-accessible	Remote Temperature, Humidity, and Dewpoint (THD) Sensor
thdSensorEntry	1.3.6.1.4.1.21239.5.2.9.1		not-accessible	Entry in the thdSensorTable table: each entry contains an index and other sensor details
I32 thdSensorIndex	1.3.6.1.4.1.21239.5.2.9.1.1	Integer32	not-accessible	Table entry index value
STR thdSensorSerial	1.3.6.1.4.1.21239.5.2.9.1.2	DisplayString	read-only	Serial number
STR thdSensorLabel	1.3.6.1.4.1.21239.5.2.9.1.3	SnmpAdminString	read-write	User-defined label
G32 thdSensorAvail	1.3.6.1.4.1.21239.5.2.9.1.4	Gauge32	read-only	Device availability: 0 = Unavailable 1 = Available 2 = Partially Unavailable
I32 thdSensorTemp	1.3.6.1.4.1.21239.5.2.9.1.5	Integer32	read-only	Temperature value in tenths of a degree. Units are given by temperatureUnits field in deviceInfo.
I32 thdSensorHumidity	1.3.6.1.4.1.21239.5.2.9.1.6	Integer32	read-only	Humidity value
I32 thdSensorDewPoint	1.3.6.1.4.1.21239.5.2.9.1.7	Integer32	read-only	Dewpoint value in tenths of a degree. Units are given by temperatureUnits field in deviceInfo.
a2dSensorTable	1.3.6.1.4.1.21239.5.2.11		not-accessible	Analog measurement (A2D) sensor (voltage, current, or dry-contact)
a2dSensorEntry	1.3.6.1.4.1.21239.5.2.11.1		not-accessible	Entry in the a2dSensorTable table: each entry contains an index and other sensor details
I32 a2dSensorIndex	1.3.6.1.4.1.21239.5.2.11.1.1	Integer32	not-accessible	Table entry index value
STR a2dSensorSerial	1.3.6.1.4.1.21239.5.2.11.1.2	DisplayString	read-only	Serial number
STR a2dSensorLabel	1.3.6.1.4.1.21239.5.2.11.1.3	SnmpAdminString	read-write	User-defined label
G32 a2dSensorAvail	1.3.6.1.4.1.21239.5.2.11.1.4	Gauge32	read-only	Device availability: 0 = Unavailable 1 = Available 2 = Partially Unavailable
I32 a2dSensorValue	1.3.6.1.4.1.21239.5.2.11.1.5	Integer32	read-only	Analog measurement value, within either a user-defined or preset range, depending on a2dSensorMode.
STR a2dSensorDisplayValue	1.3.6.1.4.1.21239.5.2.11.1.6	SnmpAdminString	read-only	For current/voltage modes, the analog value is given as a string. In binary modes, the value is either a2dSensorLowLabel or a2dSensorHighLabel, based on a2dSensorValue.
INT a2dSensorMode	1.3.6.1.4.1.21239.5.2.11.1.7	INTEGER	read-write	Binary modes have two states represented by the values 0 (low) or 1 (high). These correspond to a2dSensorLowLabel and a2dSensorHighLabel. Current and voltage modes provide a scaled value from a2dSensorMin to a2dSensorMax. Analog modes: 1 = Door (binary) 2 = Power failure (binary) 3 = Flood (binary) 4 = Water-sensing cable leak (binary) 5 = Water-sensing cable fault (binary) 6 = Smoke alarm (binary) 7 = Isolated voltage negative ground (voltage) 8 = Isolated voltage positive ground (voltage) 9 = Custom voltage (voltage) 10 = Custom binary (binary) 11 = Custom current (current)
STR a2dSensorUnits	1.3.6.1.4.1.21239.5.2.11.1.8	SnmpAdminString	read-write	The units for the analog value. If a2dSensorMode is customVoltage(9) or customCurrent(11), then this field has a user-defined value. Otherwise, the value is fixed, based on mode.
I32 a2dSensorMin	1.3.6.1.4.1.21239.5.2.11.1.9	Integer32	read-write	Minimum analog value, given as an integer. The analog measurement is scaled to the range a2dSensorMin to a2dSensorMax. If a2dSensorMode is customVoltage(9) or customCurrent(11), then this field has a user- defined value. Otherwise, the value is fixed, based on mode.
I32 a2dSensorMax	1.3.6.1.4.1.21239.5.2.11.1.10	Integer32	read-write	Maximum analog value, given as an integer. The analog measurement is scaled to the range a2dSensorMin to a2dSensorMax. If a2dSensorMode is customVoltage(9) or customCurrent(11), then this field has a user- defined value. Otherwise, the value is fixed, based on mode.
STR a2dSensorLowLabel	1.3.6.1.4.1.21239.5.2.11.1.11	SnmpAdminString	read-write	Label for 0 (low) binary value. This field is only applicable if a2dSensorMode is one of the binary modes. If a2dSensorMode is customBinary(10), then this field is user-defined. Otherwise, it has a pre-defined value based on the mode.
STR a2dSensorHighLabel	1.3.6.1.4.1.21239.5.2.11.1.12	SnmpAdminString	read-write	Label for 1 (high) binary value. The field is only applicable if a2dSensorMode is one of the binary modes. If a2dSensorMode is customBinary(10), then this field is user-defined. Otherwise, it has a pre-defined value based on the mode.
STR a2dSensorAnalogLabel	1.3.6.1.4.1.21239.5.2.11.1.13	SnmpAdminString	read-write	Label for the analog measurement
humiditySensorTable	1.3.6.1.4.1.21239.5.2.12		not-accessible	Remote humidity sensor
humiditySensorEntry	1.3.6.1.4.1.21239.5.2.12.1		not-accessible	Entry in the humiditySensorTable table: each entry contains an index and other sensor details
I32 humiditySensorIndex	1.3.6.1.4.1.21239.5.2.12.1.1	Integer32	not-accessible	Table entry index value
STR humiditySensorSerial	1.3.6.1.4.1.21239.5.2.12.1.2	DisplayString	read-only	Serial number
STR humiditySensorLabel	1.3.6.1.4.1.21239.5.2.12.1.3	SnmpAdminString	read-write	User-defined label
G32 humiditySensorAvail	1.3.6.1.4.1.21239.5.2.12.1.4	Gauge32	read-only	Device availability: 0 = Unavailable 1 = Available 2 = Partially Unavailable
I32 humiditySensorValue	1.3.6.1.4.1.21239.5.2.12.1.5	Integer32	read-only	Humidity value
sn2dSensorTable	1.3.6.1.4.1.21239.5.2.13		not-accessible	2 Door Switch Sensor (SN-2D)
sn2dSensorEntry	1.3.6.1.4.1.21239.5.2.13.1		not-accessible	Entry in the sn2dSensorTable table: each entry contains an index and other sensor details
I32 sn2dSensorIndex	1.3.6.1.4.1.21239.5.2.13.1.1	Integer32	not-accessible	Table entry index value
STR sn2dSensorSerial	1.3.6.1.4.1.21239.5.2.13.1.2	DisplayString	read-only	Serial number
STR sn2dSensorLabel	1.3.6.1.4.1.21239.5.2.13.1.3	SnmpAdminString	read-write	User-defined label
G32 sn2dSensorAvail	1.3.6.1.4.1.21239.5.2.13.1.4	Gauge32	read-only	Device availability: 0 = Unavailable 1 = Available 2 = Partially Unavailable
STR sn2dSensorDoor1Label	1.3.6.1.4.1.21239.5.2.13.1.5	SnmpAdminString	read-write	Door switch 1 label
INT sn2dSensorDoor1State	1.3.6.1.4.1.21239.5.2.13.1.6	INTEGER	read-only	Door switch 1 state: 1 = open 2 = closed
STR sn2dSensorDoor1DisplayState	1.3.6.1.4.1.21239.5.2.13.1.7	SnmpAdminString	read-only	Door switch 1 state given as a string
STR sn2dSensorDoor2Label	1.3.6.1.4.1.21239.5.2.13.1.8	SnmpAdminString	read-write	Door switch 2 label
INT sn2dSensorDoor2State	1.3.6.1.4.1.21239.5.2.13.1.9	INTEGER	read-only	Door switch 2 state: 1 = open 2 = closed
STR sn2dSensorDoor2DisplayState	1.3.6.1.4.1.21239.5.2.13.1.10	SnmpAdminString	read-only	Door switch 2 state given as a string
cooling	1.3.6.1.4.1.21239.5.2.30
vrc	1.3.6.1.4.1.21239.5.2.30.1
vrcMainTable	1.3.6.1.4.1.21239.5.2.30.1.1		not-accessible	Table that contains general VRC information
vrcMainEntry	1.3.6.1.4.1.21239.5.2.30.1.1.1		not-accessible	Entry in the vrcMainTable: each entry represents a VRC device
I32 vrcMainIndex	1.3.6.1.4.1.21239.5.2.30.1.1.1.1	Integer32	not-accessible	Unique id for each entry in the table
STR vrcMainSerial	1.3.6.1.4.1.21239.5.2.30.1.1.1.2	DisplayString	read-only	Serial number
STR vrcMainName	1.3.6.1.4.1.21239.5.2.30.1.1.1.3	SnmpAdminString	read-only	VRC name (factory-assigned)
STR vrcMainLabel	1.3.6.1.4.1.21239.5.2.30.1.1.1.4	SnmpAdminString	read-write	VRC label (user-defined)
G32 vrcMainAvail	1.3.6.1.4.1.21239.5.2.30.1.1.1.5	Gauge32	read-only	Device availability: 0 = Unavailable 1 = Available 2 = Partially Unavailable
vrcMainPtTable	1.3.6.1.4.1.21239.5.2.30.1.2		not-accessible	Table that contains general VRC status
vrcMainPtEntry	1.3.6.1.4.1.21239.5.2.30.1.2.1		not-accessible	Entry in the vrcMainPtTable: each entry contains status data for a VRC device
I32 vrcMainPtIndex	1.3.6.1.4.1.21239.5.2.30.1.2.1.1	Integer32	not-accessible	Unique id for each entry in the table
INT vrcMainPtRunState	1.3.6.1.4.1.21239.5.2.30.1.2.1.2	INTEGER	read-only	VRC run state: 1 = on 2 = off
I32 vrcMainPtEevOpened	1.3.6.1.4.1.21239.5.2.30.1.2.1.3	Integer32	read-only	Eev opened value (percent)
I32 vrcMainPtAlarmNumbers	1.3.6.1.4.1.21239.5.2.30.1.2.1.4	Integer32	read-only	Alarm numbers value
I32 vrcMainPtHistoryAlarmNumbers	1.3.6.1.4.1.21239.5.2.30.1.2.1.5	Integer32	read-only	History alarm numbers value
I32 vrcMainPtHpAbnRecordCnt	1.3.6.1.4.1.21239.5.2.30.1.2.1.6	Integer32	read-only	Hp Abnormal record count
INT vrcMainPtMonitorBaudrate	1.3.6.1.4.1.21239.5.2.30.1.2.1.7	INTEGER	read-only	Monitor baud rate: 1 = error 2 = 1200 3 = 2400 4 = 4800 5 = 9600 6 = 19200
I32 vrcMainPtMonitorAddress	1.3.6.1.4.1.21239.5.2.30.1.2.1.8	Integer32	read-only	Monitor address
T/F vrcMainPtLp	1.3.6.1.4.1.21239.5.2.30.1.2.1.9	TruthValue	read-only	Lp status
T/F vrcMainPtFilterMaintRemind	1.3.6.1.4.1.21239.5.2.30.1.2.1.10	TruthValue	read-only	Filter maintenance reminder status
T/F vrcMainPtCoolingFlag	1.3.6.1.4.1.21239.5.2.30.1.2.1.11	TruthValue	read-only	Cooling flag
T/F vrcMainPtFirstOnFlag	1.3.6.1.4.1.21239.5.2.30.1.2.1.12	TruthValue	read-only	First on flag
T/F vrcMainPtNewAlarmFlag	1.3.6.1.4.1.21239.5.2.30.1.2.1.13	TruthValue	read-only	New alarm flag
T/F vrcMainPtComAlarmOutState	1.3.6.1.4.1.21239.5.2.30.1.2.1.14	TruthValue	read-only	Common alarm output state
T/F vrcMainPtHighWaterInput	1.3.6.1.4.1.21239.5.2.30.1.2.1.15	TruthValue	read-only	High water input
T/F vrcMainPtHighWaterAlarm	1.3.6.1.4.1.21239.5.2.30.1.2.1.16	TruthValue	read-only	High water alarm status
T/F vrcMainPtWaterUnderFloorAlarm	1.3.6.1.4.1.21239.5.2.30.1.2.1.17	TruthValue	read-only	Water under floor alarm status
T/F vrcMainPtSwShutDownStatus	1.3.6.1.4.1.21239.5.2.30.1.2.1.18	TruthValue	read-only	Software shutdown status
T/F vrcMainPtRemoteShutdown	1.3.6.1.4.1.21239.5.2.30.1.2.1.19	TruthValue	read-only	Remote shutdown status
T/F vrcMainPtRemoteShutDownFlag	1.3.6.1.4.1.21239.5.2.30.1.2.1.20	TruthValue	read-only	Remote shutdown flag
T/F vrcMainPtRemoteShutDownAlarm	1.3.6.1.4.1.21239.5.2.30.1.2.1.21	TruthValue	read-only	Remote shutdown alarm status
T/F vrcMainPtHmiShutDownFlag	1.3.6.1.4.1.21239.5.2.30.1.2.1.22	TruthValue	read-only	Hmi shutdown flag
T/F vrcMainPtLpAlarm	1.3.6.1.4.1.21239.5.2.30.1.2.1.23	TruthValue	read-only	Low pressure alarm status
T/F vrcMainPtHpAlarm	1.3.6.1.4.1.21239.5.2.30.1.2.1.24	TruthValue	read-only	High pressure alarm status
T/F vrcMainPtLpFreqAlarm	1.3.6.1.4.1.21239.5.2.30.1.2.1.25	TruthValue	read-only	Low pressure frequently alarm status
T/F vrcMainPtHpFreqAlarm	1.3.6.1.4.1.21239.5.2.30.1.2.1.26	TruthValue	read-only	High pressure frequently alarm status
T/F vrcMainPtLpSensorFailAlarm	1.3.6.1.4.1.21239.5.2.30.1.2.1.27	TruthValue	read-only	Low pressure sensor failure alarm status
T/F vrcMainPtHpSensorFailAlarm	1.3.6.1.4.1.21239.5.2.30.1.2.1.28	TruthValue	read-only	High pressure sensor failure alarm status
T/F vrcMainPtEevCommFailAlarm	1.3.6.1.4.1.21239.5.2.30.1.2.1.29	TruthValue	read-only	Eev communication failure alarm status
vrcMainCfgTable	1.3.6.1.4.1.21239.5.2.30.1.3		not-accessible	Table that contains general VRC configuration
vrcMainCfgEntry	1.3.6.1.4.1.21239.5.2.30.1.3.1		not-accessible	Entry in the vrcMainCfgTable: each entry contains general config fields for a VRC device
I32 vrcMainCfgIndex	1.3.6.1.4.1.21239.5.2.30.1.3.1.1	Integer32	not-accessible	Unique id for each entry in the table
INT vrcMainCfgModelSelect	1.3.6.1.4.1.21239.5.2.30.1.3.1.2	INTEGER	read-write	Model Selection: 1 = TMM-Local 220V 50/60HZ 2 = TMM-Global 208/230V 50/60HZ 3 = TMM-Global 120V 50/60HZ 4 = SC 220V 50/60HZ 5 = 0U 220V 50/60HZ 6 = SS 208/230V 50/60HZ 7 = SS 120V 50/60HZ
I32 vrcMainCfgSystemTimeYear	1.3.6.1.4.1.21239.5.2.30.1.3.1.3	Integer32	read-write	System time - year
I32 vrcMainCfgSystemTimeMonth	1.3.6.1.4.1.21239.5.2.30.1.3.1.4	Integer32	read-write	System time - month
I32 vrcMainCfgSystemTimeDay	1.3.6.1.4.1.21239.5.2.30.1.3.1.5	Integer32	read-write	System time - day
I32 vrcMainCfgSystemTimeHour	1.3.6.1.4.1.21239.5.2.30.1.3.1.6	Integer32	read-write	System time - hour
I32 vrcMainCfgSystemTimeMin	1.3.6.1.4.1.21239.5.2.30.1.3.1.7	Integer32	read-write	System time - minutes
I32 vrcMainCfgSystemTimeSec	1.3.6.1.4.1.21239.5.2.30.1.3.1.8	Integer32	read-write	System time - seconds
I32 vrcMainCfgEevShtSettingMin	1.3.6.1.4.1.21239.5.2.30.1.3.1.9	Integer32	read-write	Min Eev sht in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: 50 to 200 Fahrenheit: 90 to 359
I32 vrcMainCfgEevShtSettingMax	1.3.6.1.4.1.21239.5.2.30.1.3.1.10	Integer32	read-write	Max Eev sht in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: 50 to 200 Fahrenheit: 90 to 359
I32 vrcMainCfgEevValveCloseSht	1.3.6.1.4.1.21239.5.2.30.1.3.1.11	Integer32	read-write	Eev valve close sht in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: 0 to 100 Fahrenheit: 0 to 179
I32 vrcMainCfgEevMopPressSetting	1.3.6.1.4.1.21239.5.2.30.1.3.1.12	Integer32	read-write	Eev mop pressure setting in tenths of a bar.
I32 vrcMainCfgLpdt	1.3.6.1.4.1.21239.5.2.30.1.3.1.13	Integer32	read-write	Low pressure dt in seconds
I32 vrcMainCfgDeadBand	1.3.6.1.4.1.21239.5.2.30.1.3.1.14	Integer32	read-write	Dead band in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: 0 to 20 Fahrenheit: 0 to 35
T/F vrcMainCfgOnOffSwitch	1.3.6.1.4.1.21239.5.2.30.1.3.1.15	TruthValue	read-write	On-off switch
T/F vrcMainCfgVacuumState	1.3.6.1.4.1.21239.5.2.30.1.3.1.16	TruthValue	read-write	Vacuum state
INT vrcMainCfgControlMode	1.3.6.1.4.1.21239.5.2.30.1.3.1.17	INTEGER	read-write	Control mode: 1 = supply 2 = return
T/F vrcMainCfgManualRunEnable	1.3.6.1.4.1.21239.5.2.30.1.3.1.18	TruthValue	read-write	Manual run enable
T/F vrcMainCfgRemShutdownInput	1.3.6.1.4.1.21239.5.2.30.1.3.1.19	TruthValue	read-write	Remote shutdown input
T/F vrcMainCfgMonitorShutDownFlag	1.3.6.1.4.1.21239.5.2.30.1.3.1.20	TruthValue	read-write	Monitor shutdown flag
I32 vrcMainCfgFirstOnPassword	1.3.6.1.4.1.21239.5.2.30.1.3.1.21	Integer32	read-write	First on password value
T/F vrcMainCfgFilterMaintSetting	1.3.6.1.4.1.21239.5.2.30.1.3.1.22	TruthValue	read-write	Filter maintenance setting
I32 vrcMainCfgFilterMaintRemindTime	1.3.6.1.4.1.21239.5.2.30.1.3.1.23	Integer32	read-write	Time between filter maintenance reminders in days
INT vrcMainCfgFilterMaintRemindCtrl	1.3.6.1.4.1.21239.5.2.30.1.3.1.24	INTEGER	read-write	Filter maintenance reminder: 1 = close 2 = suspend 3 = open
T/F vrcMainCfgCommonAlarmOutputDir	1.3.6.1.4.1.21239.5.2.30.1.3.1.25	TruthValue	read-write	Common alarm output direction
I32 vrcMainCfgHpAbnAlarmSetting	1.3.6.1.4.1.21239.5.2.30.1.3.1.26	Integer32	read-write	Abnormal high pressure alarm value in tenths of a bar
INT vrcMainCfgLpAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.3.1.27	INTEGER	read-write	Low pressure alarm control: 2 = suspend 3 = open
INT vrcMainCfgHpAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.3.1.28	INTEGER	read-write	High pressure alarm control: 2 = suspend 3 = open
INT vrcMainCfgLpFreqAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.3.1.29	INTEGER	read-write	Low pressure frequently alarm control: 2 = suspend 3 = open
INT vrcMainCfgHpFreqAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.3.1.30	INTEGER	read-write	High pressure frequently alarm control: 2 = suspend 3 = open
INT vrcMainCfgLpSensorFailAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.3.1.31	INTEGER	read-write	Low pressure sensor failure alarm control: 2 = suspend 3 = open
INT vrcMainCfgHpSensorFailAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.3.1.32	INTEGER	read-write	High pressure sensor failure alarm control: 2 = suspend 3 = open
INT vrcMainCfgHighWaterAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.3.1.33	INTEGER	read-write	High water alarm control: 1 = close 2 = suspend 3 = open
INT vrcMainCfgRemShutdownAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.3.1.34	INTEGER	read-write	Remote shutdown alarm control: 2 = suspend 3 = open
INT vrcMainCfgEevCommFailAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.3.1.35	INTEGER	read-write	Eev communication failure alarm: 2 = suspend 3 = open
vrcOutFanPtTable	1.3.6.1.4.1.21239.5.2.30.1.4		not-accessible	Table that contains VRC out-fan status
vrcOutFanPtEntry	1.3.6.1.4.1.21239.5.2.30.1.4.1		not-accessible	Entry in the vrcOutFanPtTable: each entry represents data for a VRC out-fan
I32 vrcOutFanPtIndex	1.3.6.1.4.1.21239.5.2.30.1.4.1.1	Integer32	not-accessible	Unique id for each entry in the table
STR vrcOutFanPtName	1.3.6.1.4.1.21239.5.2.30.1.4.1.2	SnmpAdminString	read-only	Out-fan name (factory-assigned)
I32 vrcOutFanPtSpeed	1.3.6.1.4.1.21239.5.2.30.1.4.1.3	Integer32	read-only	Fan speed (percent)
vrcOutFanCfgTable	1.3.6.1.4.1.21239.5.2.30.1.5		not-accessible	Table used for VRC out-fan configuration
vrcOutFanCfgEntry	1.3.6.1.4.1.21239.5.2.30.1.5.1		not-accessible	Entry in the vrcOutFanCfgTable: each entry contains config fields for a VRC out-fan
I32 vrcOutFanCfgIndex	1.3.6.1.4.1.21239.5.2.30.1.5.1.1	Integer32	not-accessible	Unique id for each entry in the table
I32 vrcOutFanCfgStartPress	1.3.6.1.4.1.21239.5.2.30.1.5.1.2	Integer32	read-write	Out-fan start pressure in tenths of a bar
I32 vrcOutFanCfgPressSetting	1.3.6.1.4.1.21239.5.2.30.1.5.1.3	Integer32	read-write	Out-fan pressure setting in tenths of a bar
I32 vrcOutFanCfgMinPowerVoltage	1.3.6.1.4.1.21239.5.2.30.1.5.1.4	Integer32	read-write	Min out-fan voltage (percent)
I32 vrcOutFanCfgMaxPowerVoltage	1.3.6.1.4.1.21239.5.2.30.1.5.1.5	Integer32	read-write	Max out-fan voltage (percent)
I32 vrcOutFanCfgSpeed	1.3.6.1.4.1.21239.5.2.30.1.5.1.6	Integer32	read-write	Out-fan speed (percent)
vrcInFanPtTable	1.3.6.1.4.1.21239.5.2.30.1.6		not-accessible	Table that contains VRC in-fan status
vrcInFanPtEntry	1.3.6.1.4.1.21239.5.2.30.1.6.1		not-accessible	Entry in the vrcInFanPtTable: each entry represents data for a VRC in- fan
I32 vrcInFanPtIndex	1.3.6.1.4.1.21239.5.2.30.1.6.1.1	Integer32	not-accessible	Unique id for each entry in the table
STR vrcInFanPtName	1.3.6.1.4.1.21239.5.2.30.1.6.1.2	SnmpAdminString	read-only	In-fan name (factory-assigned)
I32 vrcInFanPtRunTimeHours	1.3.6.1.4.1.21239.5.2.30.1.6.1.3	Integer32	read-only	In-fan run time in hours
I32 vrcInFanPtStartStopCount	1.3.6.1.4.1.21239.5.2.30.1.6.1.4	Integer32	read-only	In-fan start/stop count
vrcInFanCfgTable	1.3.6.1.4.1.21239.5.2.30.1.7		not-accessible	Table used for VRC in-fan configuration
vrcInFanCfgEntry	1.3.6.1.4.1.21239.5.2.30.1.7.1		not-accessible	Entry in the vrcInFanCfgTable: each entry contains config fields for a VRC in-fan
I32 vrcInFanCfgIndex	1.3.6.1.4.1.21239.5.2.30.1.7.1.1	Integer32	not-accessible	Unique id for each entry in the table
T/F vrcInFanCfgOutputStatus	1.3.6.1.4.1.21239.5.2.30.1.7.1.2	TruthValue	read-write	In-fan output status
I32 vrcInFanCfgLowSpeedStep	1.3.6.1.4.1.21239.5.2.30.1.7.1.3	Integer32	read-write	In-fan low speed step in tenths of a percent per second
I32 vrcInFanCfgHighSpeedStep	1.3.6.1.4.1.21239.5.2.30.1.7.1.4	Integer32	read-write	In-fan high speed step in tenths of a percent per second
I32 vrcInFanCfgMinSpeed	1.3.6.1.4.1.21239.5.2.30.1.7.1.5	Integer32	read-write	Min in-fan speed (percent)
I32 vrcInFanCfgStandardSpeed	1.3.6.1.4.1.21239.5.2.30.1.7.1.6	Integer32	read-write	Standard in-fan speed (percent)
I32 vrcInFanCfgMinCfc	1.3.6.1.4.1.21239.5.2.30.1.7.1.7	Integer32	read-write	Min in-fan cfc (percent)
I32 vrcInFanCfgStandardCfc	1.3.6.1.4.1.21239.5.2.30.1.7.1.8	Integer32	read-write	Standard in-fan cfc (percent)
I32 vrcInFanCfgStartDelay	1.3.6.1.4.1.21239.5.2.30.1.7.1.9	Integer32	read-write	In-fan start delay in seconds
I32 vrcInFanCfgStopDelay	1.3.6.1.4.1.21239.5.2.30.1.7.1.10	Integer32	read-write	In-fan stop delay in seconds
I32 vrcInFanCfgReduceSpeedDelay	1.3.6.1.4.1.21239.5.2.30.1.7.1.11	Integer32	read-write	In-fan reduce speed delay in seconds
I32 vrcInFanCfgJumpBand1	1.3.6.1.4.1.21239.5.2.30.1.7.1.12	Integer32	read-write	In-fan jump band 1 in tenths of a percent
I32 vrcInFanCfgJumpBand2	1.3.6.1.4.1.21239.5.2.30.1.7.1.13	Integer32	read-write	In-fan jump band 2 in tenths of a percent
I32 vrcInFanCfgJumpBand3	1.3.6.1.4.1.21239.5.2.30.1.7.1.14	Integer32	read-write	In-fan jump band 3 in tenths of a percent
I32 vrcInFanCfgJumpBand4	1.3.6.1.4.1.21239.5.2.30.1.7.1.15	Integer32	read-write	In-fan jump band 4 in tenths of a percent
I32 vrcInFanCfgJumpBand5	1.3.6.1.4.1.21239.5.2.30.1.7.1.16	Integer32	read-write	In-fan jump band 5 in tenths of a percent
I32 vrcInFanCfgJumpFreq1	1.3.6.1.4.1.21239.5.2.30.1.7.1.17	Integer32	read-write	In-fan jump frequency 1 in tenths of a percent
I32 vrcInFanCfgJumpFreq2	1.3.6.1.4.1.21239.5.2.30.1.7.1.18	Integer32	read-write	In-fan jump frequency 2 in tenths of a percent
I32 vrcInFanCfgJumpFreq3	1.3.6.1.4.1.21239.5.2.30.1.7.1.19	Integer32	read-write	In-fan jump frequency 3 in tenths of a percent
I32 vrcInFanCfgJumpFreq4	1.3.6.1.4.1.21239.5.2.30.1.7.1.20	Integer32	read-write	In-fan jump frequency 4 in tenths of a percent
I32 vrcInFanCfgJumpFreq5	1.3.6.1.4.1.21239.5.2.30.1.7.1.21	Integer32	read-write	In-fan jump frequency 5 in tenths of a percent
I32 vrcInFanCfgTempP	1.3.6.1.4.1.21239.5.2.30.1.7.1.22	Integer32	read-write	In-fan temperature P in tenths of a degree. Units are given by temperatureUnits field in deviceInfo.
I32 vrcInFanCfgTempI	1.3.6.1.4.1.21239.5.2.30.1.7.1.23	Integer32	read-write	In-fan temperature I in seconds
I32 vrcInFanCfgTempD	1.3.6.1.4.1.21239.5.2.30.1.7.1.24	Integer32	read-write	In-fan temperature D in seconds
vrcCompPtTable	1.3.6.1.4.1.21239.5.2.30.1.8		not-accessible	Table that contains VRC compressor status
vrcCompPtEntry	1.3.6.1.4.1.21239.5.2.30.1.8.1		not-accessible	Entry in the vrcCompPtTable: each entry represents data for a VRC compressor
I32 vrcCompPtIndex	1.3.6.1.4.1.21239.5.2.30.1.8.1.1	Integer32	not-accessible	Unique id for each entry in the table
STR vrcCompPtName	1.3.6.1.4.1.21239.5.2.30.1.8.1.2	SnmpAdminString	read-only	Compressor name (factory-assigned)
I32 vrcCompPtCapacity	1.3.6.1.4.1.21239.5.2.30.1.8.1.3	Integer32	read-only	Compressor capacity value (percent)
I32 vrcCompPtRunTimeHours	1.3.6.1.4.1.21239.5.2.30.1.8.1.4	Integer32	read-only	Compressor run time in hours
I32 vrcCompPtStartStopCount	1.3.6.1.4.1.21239.5.2.30.1.8.1.5	Integer32	read-only	Compressor start/stop count
T/F vrcCompPtDriverFaultU00	1.3.6.1.4.1.21239.5.2.30.1.8.1.6	TruthValue	read-only	Compressor driver fault alarm U00 state
T/F vrcCompPtDriverFaultU01	1.3.6.1.4.1.21239.5.2.30.1.8.1.7	TruthValue	read-only	Compressor driver fault alarm U01 state
T/F vrcCompPtDriverFaultU02	1.3.6.1.4.1.21239.5.2.30.1.8.1.8	TruthValue	read-only	Compressor driver fault alarm U02 state
T/F vrcCompPtDriverFaultU03	1.3.6.1.4.1.21239.5.2.30.1.8.1.9	TruthValue	read-only	Compressor driver fault alarm U03 state
T/F vrcCompPtDriverFaultU04	1.3.6.1.4.1.21239.5.2.30.1.8.1.10	TruthValue	read-only	Compressor driver fault alarm U04 state
T/F vrcCompPtDriverFaultU05	1.3.6.1.4.1.21239.5.2.30.1.8.1.11	TruthValue	read-only	Compressor driver fault alarm U05 state
T/F vrcCompPtDriverFaultU06	1.3.6.1.4.1.21239.5.2.30.1.8.1.12	TruthValue	read-only	Compressor driver fault alarm U06 state
T/F vrcCompPtDriverFaultU07	1.3.6.1.4.1.21239.5.2.30.1.8.1.13	TruthValue	read-only	Compressor driver fault alarm U07 state
T/F vrcCompPtDriverFaultU08	1.3.6.1.4.1.21239.5.2.30.1.8.1.14	TruthValue	read-only	Compressor driver fault alarm U08 state
T/F vrcCompPtDriverFaultU09	1.3.6.1.4.1.21239.5.2.30.1.8.1.15	TruthValue	read-only	Compressor driver fault alarm U09 state
T/F vrcCompPtDriverFaultU10	1.3.6.1.4.1.21239.5.2.30.1.8.1.16	TruthValue	read-only	Compressor driver fault alarm U10 state
T/F vrcCompPtDriverFaultU11	1.3.6.1.4.1.21239.5.2.30.1.8.1.17	TruthValue	read-only	Compressor driver fault alarm U11 state
T/F vrcCompPtDriverFaultU12	1.3.6.1.4.1.21239.5.2.30.1.8.1.18	TruthValue	read-only	Compressor driver fault alarm U12 state
T/F vrcCompPtDriverFaultU13	1.3.6.1.4.1.21239.5.2.30.1.8.1.19	TruthValue	read-only	Compressor driver fault alarm U13 state
T/F vrcCompPtDriverFaultU14	1.3.6.1.4.1.21239.5.2.30.1.8.1.20	TruthValue	read-only	Compressor driver fault alarm U14 state
T/F vrcCompPtDriverFaultU15	1.3.6.1.4.1.21239.5.2.30.1.8.1.21	TruthValue	read-only	Compressor driver fault alarm U15 state
T/F vrcCompPtDriverCommFailAlarm	1.3.6.1.4.1.21239.5.2.30.1.8.1.22	TruthValue	read-only	Compressor driver communication failure alarm state
T/F vrcCompPtFaultLockAlarm	1.3.6.1.4.1.21239.5.2.30.1.8.1.23	TruthValue	read-only	Compressor fault lock alarm state
vrcCompCfgTable	1.3.6.1.4.1.21239.5.2.30.1.9		not-accessible	Table used for VRC compressor configuration
vrcCompCfgEntry	1.3.6.1.4.1.21239.5.2.30.1.9.1		not-accessible	Entry in the vrcCompCfgTable: each entry contains config fields for a VRC compressor
I32 vrcCompCfgIndex	1.3.6.1.4.1.21239.5.2.30.1.9.1.1	Integer32	not-accessible	Unique id for each entry in the table
T/F vrcCompCfgOutputStatus	1.3.6.1.4.1.21239.5.2.30.1.9.1.2	TruthValue	read-write	Compressor output status
I32 vrcCompCfgOutputDeadBand	1.3.6.1.4.1.21239.5.2.30.1.9.1.3	Integer32	read-write	Compressor output dead band in tenths of a percent
I32 vrcCompCfgCapacityOutputValue	1.3.6.1.4.1.21239.5.2.30.1.9.1.4	Integer32	read-write	Compressor capacity output (percent)
I32 vrcCompCfgMinCapacity	1.3.6.1.4.1.21239.5.2.30.1.9.1.5	Integer32	read-write	Compressor min capacity (percent)
I32 vrcCompCfgStartCapacity	1.3.6.1.4.1.21239.5.2.30.1.9.1.6	Integer32	read-write	Compressor start capacity (percent)
I32 vrcCompCfgStandardCapacity	1.3.6.1.4.1.21239.5.2.30.1.9.1.7	Integer32	read-write	Compressor standard capacity (percent)
I32 vrcCompCfgStartCfc	1.3.6.1.4.1.21239.5.2.30.1.9.1.8	Integer32	read-write	Compressor start cfc (percent)
I32 vrcCompCfgStopCfc	1.3.6.1.4.1.21239.5.2.30.1.9.1.9	Integer32	read-write	Compressor stop cfc (percent)
I32 vrcCompCfgMinRunTime	1.3.6.1.4.1.21239.5.2.30.1.9.1.10	Integer32	read-write	Compressor min run time in minutes
I32 vrcCompCfgMinStopTime	1.3.6.1.4.1.21239.5.2.30.1.9.1.11	Integer32	read-write	Compressor min stop time in minutes
I32 vrcCompCfgJumpBand1	1.3.6.1.4.1.21239.5.2.30.1.9.1.12	Integer32	read-write	Compressor jump band 1 in tenths of a percent
I32 vrcCompCfgJumpBand2	1.3.6.1.4.1.21239.5.2.30.1.9.1.13	Integer32	read-write	Compressor jump band 2 in tenths of a percent
I32 vrcCompCfgJumpBand3	1.3.6.1.4.1.21239.5.2.30.1.9.1.14	Integer32	read-write	Compressor jump band 3 in tenths of a percent
I32 vrcCompCfgJumpBand4	1.3.6.1.4.1.21239.5.2.30.1.9.1.15	Integer32	read-write	Compressor jump band 4 in tenths of a percent
I32 vrcCompCfgJumpBand5	1.3.6.1.4.1.21239.5.2.30.1.9.1.16	Integer32	read-write	Compressor jump band 5 in tenths of a percent
I32 vrcCompCfgJumpFreq1	1.3.6.1.4.1.21239.5.2.30.1.9.1.17	Integer32	read-write	Compressor jump frequency 1 in tenths of a percent
I32 vrcCompCfgJumpFreq2	1.3.6.1.4.1.21239.5.2.30.1.9.1.18	Integer32	read-write	Compressor jump frequency 2 in tenths of a percent
I32 vrcCompCfgJumpFreq3	1.3.6.1.4.1.21239.5.2.30.1.9.1.19	Integer32	read-write	Compressor jump frequency 3 in tenths of a percent
I32 vrcCompCfgJumpFreq4	1.3.6.1.4.1.21239.5.2.30.1.9.1.20	Integer32	read-write	Compressor jump frequency 4 in tenths of a percent
I32 vrcCompCfgJumpFreq5	1.3.6.1.4.1.21239.5.2.30.1.9.1.21	Integer32	read-write	Compressor jump frequency 5 in tenths of a percent
I32 vrcCompCfgTempP	1.3.6.1.4.1.21239.5.2.30.1.9.1.22	Integer32	read-write	Compressor temperature P in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: 10 to 150 Fahrenheit: 18 to 269
I32 vrcCompCfgTempI	1.3.6.1.4.1.21239.5.2.30.1.9.1.23	Integer32	read-write	Compressor temperature I in seconds
I32 vrcCompCfgTempD	1.3.6.1.4.1.21239.5.2.30.1.9.1.24	Integer32	read-write	Compressor temperature D in seconds
INT vrcCompCfgDriverFaultAlmCtrl	1.3.6.1.4.1.21239.5.2.30.1.9.1.25	INTEGER	read-write	Compressor driver fault alarm control: 2 = suspend 3 = open
INT vrcCompCfgDriverCommFailAlmCtrl	1.3.6.1.4.1.21239.5.2.30.1.9.1.26	INTEGER	read-write	Compressor driver communication failure alarm control: 2 = suspend 3 = open
INT vrcCompCfgFaultLockAlmCtrl	1.3.6.1.4.1.21239.5.2.30.1.9.1.27	INTEGER	read-write	Compressor fault lock alarm control: 2 = suspend 3 = open
vrcReturnPtTable	1.3.6.1.4.1.21239.5.2.30.1.10		not-accessible	Table that contains VRC return status
vrcReturnPtEntry	1.3.6.1.4.1.21239.5.2.30.1.10.1		not-accessible	Entry in the vrcReturnPtTable: each entry represents return data for a VRC
I32 vrcReturnPtIndex	1.3.6.1.4.1.21239.5.2.30.1.10.1.1	Integer32	not-accessible	Unique id for each entry in the table
STR vrcReturnPtName	1.3.6.1.4.1.21239.5.2.30.1.10.1.2	SnmpAdminString	read-only	Return name (factory-assigned)
I32 vrcReturnPtTemp	1.3.6.1.4.1.21239.5.2.30.1.10.1.3	Integer32	read-only	Return temperature value in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The range is determined by the current temperature units. Celsius: -400 to 1000 Fahrenheit: -400 to 2120
T/F vrcReturnPtHighTempAlarm	1.3.6.1.4.1.21239.5.2.30.1.10.1.4	TruthValue	read-only	Return high temperature alarm state
T/F vrcReturnPtTempSensorFailAlarm	1.3.6.1.4.1.21239.5.2.30.1.10.1.5	TruthValue	read-only	Return temperature sensor failure alarm state
vrcReturnCfgTable	1.3.6.1.4.1.21239.5.2.30.1.11		not-accessible	Table used for VRC return configuration
vrcReturnCfgEntry	1.3.6.1.4.1.21239.5.2.30.1.11.1		not-accessible	Entry in the vrcReturnCfgTable: each entry contains config fields for VRC return
I32 vrcReturnCfgIndex	1.3.6.1.4.1.21239.5.2.30.1.11.1.1	Integer32	not-accessible	Unique id for each entry in the table
I32 vrcReturnCfgOilCycle	1.3.6.1.4.1.21239.5.2.30.1.11.1.2	Integer32	read-write	Return oil cycle in tenths of an hour
I32 vrcReturnCfgOilRunCapacity	1.3.6.1.4.1.21239.5.2.30.1.11.1.3	Integer32	read-write	Return Oil run capacity (percent)
I32 vrcReturnCfgOilRunTime	1.3.6.1.4.1.21239.5.2.30.1.11.1.4	Integer32	read-write	Return oil run time in minutes
I32 vrcReturnCfgTempCalValue	1.3.6.1.4.1.21239.5.2.30.1.11.1.5	Integer32	read-write	Return temperature calibration value in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: -100 to 100 Fahrenheit: -179 to 179
I32 vrcReturnCfgTempSetting	1.3.6.1.4.1.21239.5.2.30.1.11.1.6	Integer32	read-write	Return temperature setting in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: 250 to 350 Fahrenheit: 770 to 949
I32 vrcReturnCfgHighTempAlarmValue	1.3.6.1.4.1.21239.5.2.30.1.11.1.7	Integer32	read-write	Return high temperature alarm value in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: 300 to 450 Fahrenheit: 860 to 1129
INT vrcReturnCfgHighTempAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.11.1.8	INTEGER	read-write	Return high temperature alarm control: 1 = close 2 = suspend 3 = open
INT vrcReturnCfgTempSensFailAlmCtrl	1.3.6.1.4.1.21239.5.2.30.1.11.1.9	INTEGER	read-write	Return temperature sensor failure alarm control: 1 = close 2 = suspend 3 = open
vrcSupplyPtTable	1.3.6.1.4.1.21239.5.2.30.1.12		not-accessible	Table that contains VRC supply status
vrcSupplyPtEntry	1.3.6.1.4.1.21239.5.2.30.1.12.1		not-accessible	Entry in the vrcSupplyPtTable: each entry represents supply data for a VRC
I32 vrcSupplyPtIndex	1.3.6.1.4.1.21239.5.2.30.1.12.1.1	Integer32	not-accessible	Unique id for each entry in the table
STR vrcSupplyPtName	1.3.6.1.4.1.21239.5.2.30.1.12.1.2	SnmpAdminString	read-only	Supply name (factory-assigned)
I32 vrcSupplyPtTemp	1.3.6.1.4.1.21239.5.2.30.1.12.1.3	Integer32	read-only	Supply temperature value in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The range is determined by the current temperature units. Celsius: -400 to 1000 Fahrenheit: -400 to 2120
T/F vrcSupplyPtLowTempAlarm	1.3.6.1.4.1.21239.5.2.30.1.12.1.4	TruthValue	read-only	Supply low temperature alarm state
T/F vrcSupplyPtHighTempAlarm	1.3.6.1.4.1.21239.5.2.30.1.12.1.5	TruthValue	read-only	Supply high temperature alarm state
T/F vrcSupplyPtTempSensorFailAlarm	1.3.6.1.4.1.21239.5.2.30.1.12.1.6	TruthValue	read-only	Supply temperature sensor failure alarm state
vrcSupplyCfgTable	1.3.6.1.4.1.21239.5.2.30.1.13		not-accessible	Table used for VRC supply configuration
vrcSupplyCfgEntry	1.3.6.1.4.1.21239.5.2.30.1.13.1		not-accessible	Entry in the vrcSupplyCfgTable: each entry contains config fields for a VRC supply
I32 vrcSupplyCfgIndex	1.3.6.1.4.1.21239.5.2.30.1.13.1.1	Integer32	not-accessible	Unique id for each entry in the table
I32 vrcSupplyCfgTempCalValue	1.3.6.1.4.1.21239.5.2.30.1.13.1.2	Integer32	read-write	Supply temperature calibration value in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: -100 to 100 Fahrenheit: -179 to 179
I32 vrcSupplyCfgTempSetting	1.3.6.1.4.1.21239.5.2.30.1.13.1.3	Integer32	read-write	Supply temperature setting in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: 130 to 280 Fahrenheit: 554 to 823
I32 vrcSupplyCfgLowTempAlarmValue	1.3.6.1.4.1.21239.5.2.30.1.13.1.4	Integer32	read-write	Supply low temperature alarm value in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: 50 to 200 Fahrenheit: 410 to 679
I32 vrcSupplyCfgHighTempAlarmValue	1.3.6.1.4.1.21239.5.2.30.1.13.1.5	Integer32	read-write	Supply high temperature alarm value in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: 200 to 350 Fahrenheit: 680 to 949
INT vrcSupplyCfgLowTempAlmCtrl	1.3.6.1.4.1.21239.5.2.30.1.13.1.6	INTEGER	read-write	Supply low temperature alarm control: 1 = close 2 = suspend 3 = open
INT vrcSupplyCfgHighTempAlmCtrl	1.3.6.1.4.1.21239.5.2.30.1.13.1.7	INTEGER	read-write	Supply high temperature alarm control: 1 = close 2 = suspend 3 = open
INT vrcSupplyCfgTempSensFailAlmCtrl	1.3.6.1.4.1.21239.5.2.30.1.13.1.8	INTEGER	read-write	Supply temperature sensor failure alarm control: 1 = close 2 = suspend 3 = open
vrcPowerPtTable	1.3.6.1.4.1.21239.5.2.30.1.14		not-accessible	Table that contains VRC power status
vrcPowerPtEntry	1.3.6.1.4.1.21239.5.2.30.1.14.1		not-accessible	Entry in the vrcPowerPtTable: each entry represents power data for a VRC
I32 vrcPowerPtIndex	1.3.6.1.4.1.21239.5.2.30.1.14.1.1	Integer32	not-accessible	Unique id for each entry in the table
STR vrcPowerPtName	1.3.6.1.4.1.21239.5.2.30.1.14.1.2	SnmpAdminString	read-only	Power name (factory-assigned)
I32 vrcPowerPtVoltage	1.3.6.1.4.1.21239.5.2.30.1.14.1.3	Integer32	read-only	Power voltage measurement in tenths of a volt
I32 vrcPowerPtFrequency	1.3.6.1.4.1.21239.5.2.30.1.14.1.4	Integer32	read-only	Power frequency measurement in tenths of hertz
T/F vrcPowerPtLowVoltageAlarm	1.3.6.1.4.1.21239.5.2.30.1.14.1.5	TruthValue	read-only	Power low voltage alarm state
T/F vrcPowerPtHighVoltageAlarm	1.3.6.1.4.1.21239.5.2.30.1.14.1.6	TruthValue	read-only	Power high voltage alarm state
T/F vrcPowerPtLossOfPhasePowerAlarm	1.3.6.1.4.1.21239.5.2.30.1.14.1.7	TruthValue	read-only	Phase power loss alarm state
T/F vrcPowerPtLossOfPowerAlarm	1.3.6.1.4.1.21239.5.2.30.1.14.1.8	TruthValue	read-only	Power loss alarm state
T/F vrcPowerPtFrequencyErrorAlarm	1.3.6.1.4.1.21239.5.2.30.1.14.1.9	TruthValue	read-only	Power frequency error alarm state
vrcPowerCfgTable	1.3.6.1.4.1.21239.5.2.30.1.15		not-accessible	Table used for VRC power configuration
vrcPowerCfgEntry	1.3.6.1.4.1.21239.5.2.30.1.15.1		not-accessible	Entry in the vrcPowerCfgTable: each entry contains config fields for VRC power
I32 vrcPowerCfgIndex	1.3.6.1.4.1.21239.5.2.30.1.15.1.1	Integer32	not-accessible	Unique id for each entry in the table
I32 vrcPowerCfgLowVoltageSetting	1.3.6.1.4.1.21239.5.2.30.1.15.1.2	Integer32	read-write	Power low voltage setting in volts
I32 vrcPowerCfgHighVoltageSetting	1.3.6.1.4.1.21239.5.2.30.1.15.1.3	Integer32	read-write	Power high voltage setting in volts
INT vrcPowerCfgLowVoltageAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.15.1.4	INTEGER	read-write	Power low voltage alarm control: 1 = close 2 = suspend 3 = open
INT vrcPowerCfgHighVoltageAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.15.1.5	INTEGER	read-write	Power high voltage alarm control: 1 = close 2 = suspend 3 = open
INT vrcPowerCfgLossOfPowerAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.15.1.6	INTEGER	read-write	Power loss alarm control: 1 = close 2 = suspend 3 = open
INT vrcPowerCfgFreqErrorAlarmCtrl	1.3.6.1.4.1.21239.5.2.30.1.15.1.7	INTEGER	read-write	Power frequency error alarm control: 1 = close 2 = suspend 3 = open
vrcOutdoorPtTable	1.3.6.1.4.1.21239.5.2.30.1.16		not-accessible	Table that contains VRC outdoor status
vrcOutdoorPtEntry	1.3.6.1.4.1.21239.5.2.30.1.16.1		not-accessible	Entry in the vrcOutdoorPtTable: each entry represents data for a VRC outdoor
I32 vrcOutdoorPtIndex	1.3.6.1.4.1.21239.5.2.30.1.16.1.1	Integer32	not-accessible	Unique id for each entry in the table
STR vrcOutdoorPtName	1.3.6.1.4.1.21239.5.2.30.1.16.1.2	SnmpAdminString	read-only	Outdoor name (factory-assigned)
I32 vrcOutdoorPtTemp	1.3.6.1.4.1.21239.5.2.30.1.16.1.3	Integer32	read-only	Outdoor temperature value in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The range is determined by the current temperature units. Celsius: -400 to 1000 Fahrenheit: -400 to 2120
vrcDischPtTable	1.3.6.1.4.1.21239.5.2.30.1.18		not-accessible	Table that contains VRC discharge status
vrcDischPtEntry	1.3.6.1.4.1.21239.5.2.30.1.18.1		not-accessible	Entry in the vrcDischPtTable: each entry represents discharge data for a VRC
I32 vrcDischPtIndex	1.3.6.1.4.1.21239.5.2.30.1.18.1.1	Integer32	not-accessible	Unique id for each entry in the table
STR vrcDischPtName	1.3.6.1.4.1.21239.5.2.30.1.18.1.2	SnmpAdminString	read-only	Discharge name (factory-assigned)
I32 vrcDischPtTemp	1.3.6.1.4.1.21239.5.2.30.1.18.1.3	Integer32	read-write	Discharge temperature value in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The range is determined by the current temperature units. Celsius: -400 to 1560 Fahrenheit: -400 to 3128
I32 vrcDischPtPressure	1.3.6.1.4.1.21239.5.2.30.1.18.1.4	Integer32	read-write	Discharge air pressure value in tenths of a bar
T/F vrcDischPtHighTempAlarm	1.3.6.1.4.1.21239.5.2.30.1.18.1.5	TruthValue	read-only	Discharge high temperature alarm state
T/F vrcDischPtHighTempFreqAlarm	1.3.6.1.4.1.21239.5.2.30.1.18.1.6	TruthValue	read-only	Discharge high temperature frequently alarm state
T/F vrcDischPtTempSensorFailAlarm	1.3.6.1.4.1.21239.5.2.30.1.18.1.7	TruthValue	read-only	Discharge temperature sensor failure alarm state
vrcDischCfgTable	1.3.6.1.4.1.21239.5.2.30.1.19		not-accessible	Table used for VRC discharge configuration
vrcDischCfgEntry	1.3.6.1.4.1.21239.5.2.30.1.19.1		not-accessible	Entry in the vrcDischCfgTable: each entry contains config fields for VRC discharge
I32 vrcDischCfgIndex	1.3.6.1.4.1.21239.5.2.30.1.19.1.1	Integer32	not-accessible	Unique id for each entry in the table
I32 vrcDischCfgTempCalValue	1.3.6.1.4.1.21239.5.2.30.1.19.1.2	Integer32	read-write	Discharge temperature calibration value in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The settable range is determined by the current temperature units. Celsius: -100 to 100 Fahrenheit: -179 to 179
I32 vrcDischCfgPressCalValue	1.3.6.1.4.1.21239.5.2.30.1.19.1.3	Integer32	read-write	Discharge pressure calibration value in tenths of a bar
INT vrcDischCfgHighTempAlmCtrl	1.3.6.1.4.1.21239.5.2.30.1.19.1.4	INTEGER	read-write	Discharge high temperature alarm control: 2 = suspend 3 = open
INT vrcDischCfgHighTempFreqAlmCtrl	1.3.6.1.4.1.21239.5.2.30.1.19.1.5	INTEGER	read-write	Discharge high temperature frequenctly alarm control: 2 = suspend 3 = open
INT vrcDischCfgTempSensFailAlmCtrl	1.3.6.1.4.1.21239.5.2.30.1.19.1.6	INTEGER	read-write	Discharge temperature sensor failure alarm control: 2 = suspend 3 = open
vrcSuctPtTable	1.3.6.1.4.1.21239.5.2.30.1.20		not-accessible	Table that contains VRC suction status
vrcSuctPtEntry	1.3.6.1.4.1.21239.5.2.30.1.20.1		not-accessible	Entry in the vrcSuctPtTable: each entry represents suction data for a VRC
I32 vrcSuctPtIndex	1.3.6.1.4.1.21239.5.2.30.1.20.1.1	Integer32	not-accessible	Unique id for each entry in the table
STR vrcSuctPtName	1.3.6.1.4.1.21239.5.2.30.1.20.1.2	SnmpAdminString	read-only	Suction name (factory-assigned)
I32 vrcSuctPtTemp	1.3.6.1.4.1.21239.5.2.30.1.20.1.3	Integer32	read-only	Suction temperature in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The range is determined by the current temperature units. Celsius: -400 to 1000 Fahrenheit: -400 to 2120
I32 vrcSuctPtPressure	1.3.6.1.4.1.21239.5.2.30.1.20.1.4	Integer32	read-only	Suction air pressure in tenths of a bar
I32 vrcSuctPtSuperHeatTemp	1.3.6.1.4.1.21239.5.2.30.1.20.1.5	Integer32	read-only	Suction super heat temperature in tenths of a degree. Units are given by temperatureUnits field in deviceInfo. The range is determined by the current temperature units. Celsius: -400 to 1000 Fahrenheit: -400 to 2120
T/F vrcSuctPtTempSensorFailAlarm	1.3.6.1.4.1.21239.5.2.30.1.20.1.6	TruthValue	read-only	Suction temperature sensor failure alarm state
vrcSuctCfgTable	1.3.6.1.4.1.21239.5.2.30.1.21		not-accessible	Table used for VRC suction configuration
vrcSuctCfgEntry	1.3.6.1.4.1.21239.5.2.30.1.21.1		not-accessible	Entry in the vrcSuctCfgTable: each entry contains config fields for VRC suction
I32 vrcSuctCfgIndex	1.3.6.1.4.1.21239.5.2.30.1.21.1.1	Integer32	not-accessible	Unique id for each entry in the table
I32 vrcSuctCfgPressCalValue	1.3.6.1.4.1.21239.5.2.30.1.21.1.2	Integer32	read-write	Suction pressure calibration value in tenths of a bar
INT vrcSuctCfgTempSensFailAlmCtrl	1.3.6.1.4.1.21239.5.2.30.1.21.1.3	INTEGER	read-write	Suction temperature sensor failure alarm control: 2 = suspend 3 = open
trap	1.3.6.1.4.1.21239.5.2.32767
trapPrefix	1.3.6.1.4.1.21239.5.2.32767.0
NTF internalTestNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10101			Test SNMP Trap
NTF pduMainAvailNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10305			PDU availability trap
NTF pduTotalRealPowerNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10309			PDU total real power trap
NTF pduTotalApparentPowerNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10310			PDU total apparent power trap
NTF pduTotalPowerFactorNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10311			PDU total power factor trap
NTF pduTotalEnergyNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10312			PDU total energy trap
NTF pduPhaseVoltageNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10324			PDU phase voltage trap
NTF pduPhaseCurrentNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10328			PDU phase current trap
NTF pduPhaseRealPowerNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10332			PDU phase real power trap
NTF pduPhaseApparentPowerNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10333			PDU phase apparent power trap
NTF pduPhasePowerFactorNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10334			PDU phase power factor trap
NTF pduPhaseEnergyNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10335			PDU phase energy trap
NTF pduPhaseBalanceNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10337			PDU phase balance trap
NTF pduPhaseCurrentCrestFactorNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10339			PDU phase current crest factor trap
NTF pduBreakerCurrentNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10354			PDU breaker current trap
NTF pduBreakerVoltageNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10358			PDU breaker voltage trap
NTF pduBreakerRealPowerNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10362			PDU breaker real power trap
NTF pduBreakerApparentPowerNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10363			PDU breaker apparent power trap
NTF pduBreakerPowerFactorNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10364			PDU breaker power factor trap
NTF pduBreakerEnergyNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10365			PDU breaker energy trap
NTF pduLineCurrentNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10374			PDU line current trap
NTF pduOutletMeterVoltageNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10385			PDU outlet voltage trap
NTF pduOutletMeterCurrentNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10389			PDU outlet current trap
NTF pduOutletMeterRealPowerNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10393			PDU outlet real power trap
NTF pduOutletMeterApparentPowerNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10394			PDU outlet apparent power trap
NTF pduOutletMeterPowerFactorNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10395			PDU outlet power factor trap
NTF pduOutletMeterEnergyNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10396			PDU outlet energy trap
NTF pduOutletCurrentCrestFactorNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10400			PDU outlet current crest factor trap
NTF tempSensorAvailNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10404			RT availability trap
NTF tempSensorTempNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10405			RT temperature trap
NTF airFlowSensorAvailNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10504			AFHT3 availability trap
NTF airFlowSensorTempNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10505			AFHT3 temperature trap
NTF airFlowSensorFlowNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10506			AFHT3 airflow trap
NTF airFlowSensorHumidityNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10507			AFHT3 humidity trap
NTF airFlowSensorDewPointNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10508			AFHT3 dewpoint trap
NTF t3hdSensorAvailNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10804			T3HD availability trap
NTF t3hdSensorIntTempNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10806			T3HD Internal temperature trap
NTF t3hdSensorIntHumidityNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10807			T3HD Internal humidity trap
NTF t3hdSensorIntDewPointNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10808			T3HD Internal dewpoint trap
NTF t3hdSensorExtATempNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10811			T3HD External A temperature trap
NTF t3hdSensorExtBTempNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10814			T3HD External B temperature trap
NTF thdSensorAvailNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10904			THD availability trap
NTF thdSensorTempNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10905			THD temperature trap
NTF thdSensorHumidityNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10906			THD humidity trap
NTF thdSensorDewPointNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.10907			THD dewpoint trap
NTF a2dSensorAvailNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.11104			A2D availability trap
NTF a2dSensorValueNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.11105			A2D measurement trap
NTF humiditySensorAvailNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.11204			Remote humidity availability trap
NTF humiditySensorValueNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.11205			Remote humidity value trap
NTF sn2dSensorAvailNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.11304			SN-2D availability trap
NTF sn2dSensorDoor1StateNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.11306			SN-2D Door switch 1 state trap
NTF sn2dSensorDoor2StateNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.11309			SN-2D Door switch 2 state trap
NTF vrcMainAvailNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.13001			VRC availability trap
NTF vrcOutFanPtSpeedNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.13002			VRC out-fan speed trap
NTF vrcCompPtCapacityNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.13003			VRC compressor capacity trap
NTF vrcReturnPtTempNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.13004			VRC return temperature trap
NTF vrcSupplyPtTempNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.13005			VRC supply temperature trap
NTF vrcPowerPtVoltageNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.13006			VRC power voltage trap
NTF vrcPowerPtFrequencyNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.13007			VRC power frequency trap
NTF vrcOutdoorPtTempNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.13008			VRC outdoor temperature trap
NTF vrcDischPtTempNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.13009			VRC discharge temperature trap
NTF vrcDischPtPressureNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.13010			VRC discharge pressure trap
NTF vrcSuctPtTempNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.13011			VRC suction temperature trap
NTF vrcSuctPtPressureNOTIFY	1.3.6.1.4.1.21239.5.2.32767.0.13012			VRC suction pressure trap
NTF pduMainAvailCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20305			PDU availability clear trap
NTF pduTotalRealPowerCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20309			PDU total real power clear trap
NTF pduTotalApparentPowerCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20310			PDU total apparent power clear trap
NTF pduTotalPowerFactorCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20311			PDU total power factor clear trap
NTF pduTotalEnergyCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20312			PDU total energy clear trap
NTF pduPhaseVoltageCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20324			PDU phase voltage clear trap
NTF pduPhaseCurrentCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20328			PDU phase current clear trap
NTF pduPhaseRealPowerCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20332			PDU phase real power clear trap
NTF pduPhaseApparentPowerCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20333			PDU phase apparent power clear trap
NTF pduPhasePowerFactorCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20334			PDU phase power factor clear trap
NTF pduPhaseEnergyCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20335			PDU phase energy clear trap
NTF pduPhaseBalanceCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20337			PDU phase balance clear trap
NTF pduPhaseCurrentCrestFactorCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20339			PDU phase current crest factor clear trap
NTF pduBreakerCurrentCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20354			PDU breaker current clear trap
NTF pduBreakerVoltageCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20358			PDU breaker voltage clear trap
NTF pduBreakerRealPowerCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20362			PDU breaker real power clear trap
NTF pduBreakerApparentPowerCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20363			PDU breaker apparent power clear trap
NTF pduBreakerPowerFactorCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20364			PDU breaker power factor clear trap
NTF pduBreakerEnergyCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20365			PDU breaker energy clear trap
NTF pduLineCurrentCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20374			PDU line current clear trap
NTF pduOutletMeterVoltageCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20385			PDU outlet voltage clear trap
NTF pduOutletMeterCurrentCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20389			PDU outlet current clear trap
NTF pduOutletMeterRealPowerCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20393			PDU outlet real power clear trap
NTF pduOutletMeterApparentPowerCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20394			PDU outlet apparent power clear trap
NTF pduOutletMeterPowerFactorCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20395			PDU outlet power factor clear trap
NTF pduOutletMeterEnergyCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20396			PDU outlet energy clear trap
NTF pduOutletCurrentCrestFactorCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20400			PDU outlet current crest factor clear trap
NTF tempSensorAvailCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20404			RT availability clear trap
NTF tempSensorTempCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20405			RT temperature clear trap
NTF airFlowSensorAvailCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20504			AFHT3 availability clear trap
NTF airFlowSensorTempCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20505			AFHT3 temperature clear trap
NTF airFlowSensorFlowCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20506			AFHT3 airflow clear trap
NTF airFlowSensorHumidityCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20507			AFHT3 humidity clear trap
NTF airFlowSensorDewPointCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20508			AFHT3 dewpoint clear trap
NTF t3hdSensorAvailCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20804			T3HD availability clear trap
NTF t3hdSensorIntTempCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20806			T3HD Internal temperature clear trap
NTF t3hdSensorIntHumidityCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20807			T3HD Internal humidity clear trap
NTF t3hdSensorIntDewPointCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20808			T3HD Internal dewpoint clear trap
NTF t3hdSensorExtATempCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20811			T3HD External A temperature clear trap
NTF t3hdSensorExtBTempCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20814			T3HD External B temperature clear trap
NTF thdSensorAvailCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20904			THD availability clear trap
NTF thdSensorTempCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20905			THD temperature clear trap
NTF thdSensorHumidityCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20906			THD humidity clear trap
NTF thdSensorDewPointCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.20907			THD dewpoint clear trap
NTF a2dSensorAvailCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.21104			A2D availability clear trap
NTF a2dSensorValueCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.21105			A2D measurement clear trap
NTF humiditySensorAvailCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.21204			Remote humidity availability clear trap
NTF humiditySensorValueCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.21205			Remote humidity value clear trap
NTF sn2dSensorAvailCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.21304			SN-2D availability clear trap
NTF sn2dSensorDoor1StateCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.21306			SN-2D Door switch 1 state clear trap
NTF sn2dSensorDoor2StateCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.21309			SN-2D Door switch 2 state clear trap
NTF vrcMainAvailCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.23001			VRC availability clear trap
NTF vrcOutFanPtSpeedCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.23002			VRC out-fan speed clear trap
NTF vrcCompPtCapacityCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.23003			VRC compressor capacity clear trap
NTF vrcReturnPtTempCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.23004			VRC return temperature clear trap
NTF vrcSupplyPtTempCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.23005			VRC supply temperature clear trap
NTF vrcPowerPtVoltageCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.23006			VRC power voltage clear trap
NTF vrcPowerPtFrequencyCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.23007			VRC power frequency clear trap
NTF vrcOutdoorPtTempCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.23008			VRC outdoor temperature clear trap
NTF vrcDischPtTempCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.23009			VRC discharge temperature clear trap
NTF vrcDischPtPressureCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.23010			VRC discharge pressure clear trap
NTF vrcSuctPtTempCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.23011			VRC suction temperature clear trap
NTF vrcSuctPtPressureCLEAR	1.3.6.1.4.1.21239.5.2.32767.0.23012			VRC suction pressure clear trap
trapObj	1.3.6.1.4.1.21239.5.2.32767.1
INT trapSeverity	1.3.6.1.4.1.21239.5.2.32767.1.1	INTEGER	accessible-for-notify	Indicates the severity of the trap: 0 = None 1 = Warning 2 = Alarm
INT trapThreshType	1.3.6.1.4.1.21239.5.2.32767.1.2	INTEGER	accessible-for-notify	Only sent for threshold alarms. Identifies the threshold type: 1 = Low 2 = High
common	1.3.6.1.4.1.21239.42
identity	1.3.6.1.4.1.21239.42.1
r05	1.3.6.1.4.1.21239.42.1.15			Value given for sysObjectID on R-Series units
i03	1.3.6.1.4.1.21239.42.1.53			Value given for sysObjectID on IMD3 units

RFC description

Monitors Vertiv V5 power and cooling infrastructure including UPS, PDU, and thermal management.

Start monitoring Vertiv UPS units, Vertiv PDUs, Vertiv precision cooling/thermal management systems (identity/firmware/temperature status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VERTIV-V5-MIB