All MIBs › Unisphere-Data-DS3-CONF
Organization: Unisphere Networks, Inc.
Last Updated: 2002-08-27
Category: Juniper Unisphere ERX Conformance
Description: Defines Unisphere ERX DS3 interface MIB agent conformance groups and compliance statements.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Unisphere-Data-DS3-CONF?
Unisphere-Data-DS3-CONF is an AGENT-CAPABILITIES conformance module for the Unisphere Data Routing Switch (ERX) family, declaring which objects and groups of the DS3 interface MIB are actually implemented by the agent's DS3 component. As a conformance module it does not expose runtime data itself; instead it documents feature-level support for DS3 interface configuration and status reporting. It therefore has no direct role in reporting hardware conditions like signal alarms or line status beyond confirming which DS3 MIB variables are supported for polling. It is inherently dependent on the underlying DS3 interface MIB (likely a DS3/E3-MIB per RFC 3896/2496-family standards or a Unisphere-specific equivalent) that it provides capability statements for. It would be consulted by NMS/MIB-compiler tooling when integrating Unisphere ERX routers to determine which DS3 monitoring and configuration features are safely usable. Engineers can download the Unisphere-Data-DS3-CONF file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Unisphere-Data-DS3-CONF. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Unisphere/Juniper ERX routers with DS3 interfaces
Monitoring Examples
This module contains no runtime data objects -- its sample_objects list is empty because AGENT-CAPABILITIES modules only declare supported object groups and variations, not pollable counters or statuses. A network management system would consult this conformance module before attempting to poll DS3 line status or alarm objects on a Unisphere ERX router, rather than an administrator polling it directly for live data.
Imported Objects
From RFC1407-MIB
| dsx3ConfigEntry | OBJECT-TYPE |
| dsx3CurrentEntry | OBJECT-TYPE |
| dsx3FarEndConfigEntry | OBJECT-TYPE |
| dsx3FarEndCurrentEntry | OBJECT-TYPE |
| dsx3FarEndIntervalEntry | OBJECT-TYPE |
| dsx3FarEndTotalEntry | OBJECT-TYPE |
| dsx3FracEntry | OBJECT-TYPE |
| dsx3IntervalEntry | OBJECT-TYPE |
| dsx3SendCode | OBJECT-TYPE |
| dsx3TotalEntry | OBJECT-TYPE |
From SNMPv2-CONF
| AGENT-CAPABILITIES |
From SNMPv2-SMI
| MODULE-IDENTITY |
| usDataAgents | MODULE-IDENTITY |
| usdDs3FarEndGroup | OBJECT-GROUP |
| usdDs3Group | OBJECT-GROUP |
| usdDs3Group2 | OBJECT-GROUP |
| usdDs3Group3 | OBJECT-GROUP |
| usdDs3Group4 | OBJECT-GROUP |
| usdDs3Group5 | OBJECT-GROUP |
OIDs
RFC description
Juniper Unisphere-Data vendor-private MIB for managing DS3 (Digital Signal level 3) circuit configurations.
Start monitoring Unisphere/Juniper ERX routers with DS3 interfaces (DS3-agent conformance declaration, no data objects) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.