UX-CALL-STATS-MIB

All MIBs › UX-CALL-STATS-MIB

Organization: net.com

Last Updated: 2009-11-04

Category: VoIP and Telephony

Description: Monitors VoIP call volume, duration, quality, and error statistics on net.com gateways.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UX-CALL-STATS-MIB?

UX-CALL-STATS-MIB is a Sonus Networks (net.com) vendor MIB for the Session Border Controller line of products, modeling VoIP call volume, connection outcome, and quality statistics across T1/E1 ports and SIP signaling groups. uxPortTable, indexed by uxPTIndex and covering shelf/slot/port, exposes per-port call counters split by direction — uxPTEgressCallAttempts/Accepted/Completed/Rejected and the Ingress equivalents — plus uxPTCurrentCalls, uxPTTotalCalls, uxPTConnectedCalls, uxPTRefusedCalls, uxPTErroredCalls, blocked-call counters, and busy-hour call-attempt/completion rates (uxPTBHCARate/uxPTBHCCRate); further tables (uxSGTable, uxSipServerTable, uxChannelStatusTable, uxSGStatsCurrentTable/IntervalTable, uxCallRtStatsCurrentTable/TotalTable/IntervalTable, uxSIPRegistrationsStats tables, uxEthernetPortStats tables) extend this to SIP signaling groups, routing tables, SIP registrations, and Ethernet port-level statistics, using standard PerfCurrentCount/PerfIntervalCount/PerfTotalCount conventions from PerfHist-TC-MIB for current vs. historical interval reporting. This breadth gives an operator both real-time and interval-based visibility into call success/failure rates and port utilization, essential for diagnosing degraded call quality or capacity exhaustion on an SBC. It depends on PerfHist-TC-MIB for its performance-history textual conventions, and is deployed on Sonus/net.com SBC gateways handling T1/E1 and SIP trunk traffic, where UX-CALL-STATS-MIB SNMP monitoring gives operators the call-quality visibility needed to catch degradations early.

IPNetwork Monitor allows you to monitor SNMP objects defined in UX-CALL-STATS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sonus Networks (net.com) Session Border Controller gateways

Monitoring Examples

An operator polls uxPortTable for a given uxPTIndex and compares uxPTIngressCallAttempts against uxPTIngressCallsRejected/uxPTErroredCalls; a rising rejected/errored ratio alongside a falling uxPTConnectedCalls count would indicate a degrading trunk or upstream signaling problem on that port.

What Can Be Monitored

per-port ingress/egress call attempt, accept, complete, reject counters
current and total connected/refused/errored call counts
busy-hour call attempt and completion rates
SIP signaling group and registration statistics
Ethernet port interval/current performance counters

Imported Objects

From PerfHist-TC-MIB

PerfCurrentCount
PerfIntervalCount
PerfTotalCount

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using uxPTTotalCalls OID:

Select a Sonus Networks (net.com) Session Border Controller gateways (per-port/SIP call attempt/completion-rate status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type uxPTTotalCalls into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of calls received on this port. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
net	1.3.6.1.4.1.177
ux	1.3.6.1.4.1.177.15			The MIB module for net.com entities.
uxObjects	1.3.6.1.4.1.177.15.1
ipSystem	1.3.6.1.4.1.177.15.1.4
STR sysVersion	1.3.6.1.4.1.177.15.1.4.1	DisplayString	read-only	Current SBC software version.
STR sysBuildNumber	1.3.6.1.4.1.177.15.1.4.2	DisplayString	read-only	Current SBC software build number.
ipTelephony	1.3.6.1.4.1.177.15.1.5
callStatistics	1.3.6.1.4.1.177.15.1.5.1
uxPortTable	1.3.6.1.4.1.177.15.1.5.1.2		not-accessible	The list of ports in the system. In general this table applies to T1/E1 ports and SIP SG except as noted on individual attributes.
uxPortEntry	1.3.6.1.4.1.177.15.1.5.1.2.1		not-accessible	An entry containing information about the ports in the system.
U32 uxPTIndex	1.3.6.1.4.1.177.15.1.5.1.2.1.1	Unsigned32	not-accessible	Index for the port table. This number is assigned sequentially.
U32 uxPTShelf	1.3.6.1.4.1.177.15.1.5.1.2.1.2	Unsigned32	read-only	The shelf number this port is assigned to.
U32 uxPTSlot	1.3.6.1.4.1.177.15.1.5.1.2.1.3	Unsigned32	read-only	The slot this port is assigned to. A slot number of 0 indicates the row is associated with a SIP SG.
U32 uxPTPort	1.3.6.1.4.1.177.15.1.5.1.2.1.4	Unsigned32	read-only	The port number (within the slot). For SIP SG this value would represent the row number of the SG.
G32 uxPTCurrentCalls	1.3.6.1.4.1.177.15.1.5.1.2.1.5	Gauge32	read-only	The current number of calls active on this port. Not applicable to CAS ports.
C32 uxPTTotalCallsEx	1.3.6.1.4.1.177.15.1.5.1.2.1.6	Counter32	read-only	The total number of calls received on this port. Not applicable to CAS ports.
C32 uxPTConnectedCalls	1.3.6.1.4.1.177.15.1.5.1.2.1.7	Counter32	read-only	The number of calls answered on this port. Not applicable to CAS ports.
C32 uxPTRefusedCalls	1.3.6.1.4.1.177.15.1.5.1.2.1.8	Counter32	read-only	The number of calls refused on this port. Not applicable to CAS ports.
C32 uxPTErroredCalls	1.3.6.1.4.1.177.15.1.5.1.2.1.9	Counter32	read-only	The number of errors on this port. Not applicable to CAS ports.
C32 uxPTEgressCallAttempts	1.3.6.1.4.1.177.15.1.5.1.2.1.10	Counter32	read-only	The total number of Egress call attempts on this port.
C32 uxPTEgressCallsAccepted	1.3.6.1.4.1.177.15.1.5.1.2.1.11	Counter32	read-only	The number of Egress successfull call attempts on this port. Not applicable to CAS ports.
C32 uxPTEgressCallsCompleted	1.3.6.1.4.1.177.15.1.5.1.2.1.12	Counter32	read-only	The number of successfully completed Egress calls on this port.
C32 uxPTEgressCallsRejected	1.3.6.1.4.1.177.15.1.5.1.2.1.13	Counter32	read-only	The number of Egress calls from this port that were rejected. Not applicable to CAS ports.
C32 uxPTIngressCallAttempts	1.3.6.1.4.1.177.15.1.5.1.2.1.14	Counter32	read-only	The total number of Ingress call attempts on this port.
C32 uxPTIngressCallsAccepted	1.3.6.1.4.1.177.15.1.5.1.2.1.15	Counter32	read-only	The total number of Ingress calls accepted on this port. Not applicable to CAS ports.
C32 uxPTIngressCallsCompleted	1.3.6.1.4.1.177.15.1.5.1.2.1.16	Counter32	read-only	The number of successfully completed Ingress calls on this port.
C32 uxPTIngressCallsRejected	1.3.6.1.4.1.177.15.1.5.1.2.1.17	Counter32	read-only	The number of Ingress calls to this port that were rejected. Not applicable to CAS ports.
C32 uxPTBlockedCalls	1.3.6.1.4.1.177.15.1.5.1.2.1.18	Counter32	read-only	The number of calls blocked per channel per port. Only applicable to ISDN ports.
C32 uxPTEgressBlockedCalls	1.3.6.1.4.1.177.15.1.5.1.2.1.19	Counter32	read-only	The number of Egress calls blocked on this port. Only applicable to ISDN ports.
C32 uxPTIngressBlockedCalls	1.3.6.1.4.1.177.15.1.5.1.2.1.20	Counter32	read-only	The number of Ingress calls blocked on this port. Only applicable to ISDN ports.
C32 uxPTEgressCurrentCalls	1.3.6.1.4.1.177.15.1.5.1.2.1.21	Counter32	read-only	The number of Egress active calls on this port. Not applicable to CAS ports.
C32 uxPTIngressCurrentCalls	1.3.6.1.4.1.177.15.1.5.1.2.1.22	Counter32	read-only	The number of Ingress active calls on this port. Not applicable to CAS ports.
C32 uxPTBHCARate	1.3.6.1.4.1.177.15.1.5.1.2.1.23	Counter32	read-only	BHCA rate per DS1.
C32 uxPTBHCCRate	1.3.6.1.4.1.177.15.1.5.1.2.1.24	Counter32	read-only	BHCC rate per DS1.
uxCallRtTablesTable	1.3.6.1.4.1.177.15.1.5.2		not-accessible	This table gives the information about the Call route tables configured in SBC.
uxCallRtTablesEntry	1.3.6.1.4.1.177.15.1.5.2.1		not-accessible	An entry in the Call route tables table
INT uxCallRtTablesTableIndex	1.3.6.1.4.1.177.15.1.5.2.1.1	INTEGER	read-only	Index to Call route tables table.
STR uxDesc	1.3.6.1.4.1.177.15.1.5.2.1.2	DisplayString	read-only	Description about the Call route table.
STR uxCallRtSequence	1.3.6.1.4.1.177.15.1.5.2.1.3	DisplayString	read-only	Call route sequence followed by this table.
uxCallRtTable	1.3.6.1.4.1.177.15.1.5.3		not-accessible	This table gives the information about the Call route table configured in SBC.
uxCallRtEntry	1.3.6.1.4.1.177.15.1.5.3.1		not-accessible	An entry in the Call route table
INT uxCallRtTablesIndex	1.3.6.1.4.1.177.15.1.5.3.1.1	INTEGER	read-only	Index to Call route tables table.
INT uxCallRtIndex	1.3.6.1.4.1.177.15.1.5.3.1.2	INTEGER	read-only	Index to Call route table.
STR uxDescription	1.3.6.1.4.1.177.15.1.5.3.1.3	DisplayString	read-only	Description about the Call route table.
INT uxAdminState	1.3.6.1.4.1.177.15.1.5.3.1.4	INTEGER	read-only	AdminState of Call route table.
INT uxRoutePriority	1.3.6.1.4.1.177.15.1.5.3.1.5	INTEGER	read-only	RoutePriority to Call route table.
STR uxSignalingGroupList	1.3.6.1.4.1.177.15.1.5.3.1.6	DisplayString	read-only	SignalingGroup List to this Call route table.
INT uxQualityMetricCalls	1.3.6.1.4.1.177.15.1.5.3.1.7	INTEGER	read-only	QualityMetricCalls of this Call route table.
INT uxQualityMetricTime	1.3.6.1.4.1.177.15.1.5.3.1.8	INTEGER	read-only	QualityMetricTime of this Call route table.
INT uxQualityMinASRThreshold	1.3.6.1.4.1.177.15.1.5.3.1.9	INTEGER	read-only	QualityMinASRThreshold of this Call route table.
INT uxQualityMaxRoundTripDelayThreshold	1.3.6.1.4.1.177.15.1.5.3.1.10	INTEGER	read-only	QualityMaxRoundTripDelayThreshold of this Call route table.
INT uxQualityMaxJitterThreshold	1.3.6.1.4.1.177.15.1.5.3.1.11	INTEGER	read-only	QualityMaxJitterThreshold of this Call route table.
INT uxQualityMinMOSThreshold	1.3.6.1.4.1.177.15.1.5.3.1.12	INTEGER	read-only	QualityMinMOSThreshold of this Call route table. Shown in one tenths units
uxSGTable	1.3.6.1.4.1.177.15.1.5.4		not-accessible	This table gives the information about the Signaling groups configured in SBC.
uxSGEntry	1.3.6.1.4.1.177.15.1.5.4.1		not-accessible	An entry in the Signaling group table
INT uxSGEntryIndex	1.3.6.1.4.1.177.15.1.5.4.1.1	INTEGER	read-only	Index of the Signaling group table.
STR uxSGDescription	1.3.6.1.4.1.177.15.1.5.4.1.2	DisplayString	read-only	Description of the Signaling group table.
INT uxSGType	1.3.6.1.4.1.177.15.1.5.4.1.3	INTEGER	read-only	If the signaling group is of type SIP/ISDN.
INT uxSGAdminState	1.3.6.1.4.1.177.15.1.5.4.1.4	INTEGER	read-only	AdminState of the Signaling group table.
INT uxSGServiceState	1.3.6.1.4.1.177.15.1.5.4.1.5	INTEGER	read-only	ServiceState of the Signaling group table.Applicable to SIP only
uxSipServerTable	1.3.6.1.4.1.177.15.1.5.5		not-accessible	This table gives the information about the SIP servers associated with the SIP signalling groups in SBC.
uxSipServerEntry	1.3.6.1.4.1.177.15.1.5.5.1		not-accessible	An entry in the SIP Server table
INT uxSGIndex	1.3.6.1.4.1.177.15.1.5.5.1.1	INTEGER	read-only	Index of the Signaling group table to which this SIP server is part of.
INT uxSipServerIndex	1.3.6.1.4.1.177.15.1.5.5.1.2	INTEGER	read-only	Index of the SIP server table.
INT uxSipSvrPriority	1.3.6.1.4.1.177.15.1.5.5.1.3	INTEGER	read-only	Priority of SIP server.
STR uxSipSvrHost	1.3.6.1.4.1.177.15.1.5.5.1.4	DisplayString	read-only	IP address or FQDN of this SIP server.
INT uxSipSvrPort	1.3.6.1.4.1.177.15.1.5.5.1.5	INTEGER	read-only	Port at which this SIP server responds.
INT uxSipSvrTransProtocol	1.3.6.1.4.1.177.15.1.5.5.1.6	INTEGER	read-only	Transport protocol used by this SIP server.
uxChannelStatusTable	1.3.6.1.4.1.177.15.1.5.6		not-accessible	The list of all channels state like admin/operational state in the system.
uxChannelStatusEntry	1.3.6.1.4.1.177.15.1.5.6.1		not-accessible	An entry containing information about the channels in the system.
U32 uxChShelfNumber	1.3.6.1.4.1.177.15.1.5.6.1.1	Unsigned32	not-accessible	The shelf number this channel is attached to.
U32 uxChSlotNumber	1.3.6.1.4.1.177.15.1.5.6.1.2	Unsigned32	not-accessible	The slot number this channel is attached to.
U32 uxChPortNumber	1.3.6.1.4.1.177.15.1.5.6.1.3	Unsigned32	not-accessible	The port number this channel is attached to.
U32 uxChChannelNumber	1.3.6.1.4.1.177.15.1.5.6.1.4	Unsigned32	not-accessible	The (port-based) channel number this channel is attached to.
INT uxChAdminState	1.3.6.1.4.1.177.15.1.5.6.1.5	INTEGER	read-only	Admin state of the channel, whether adminstraively blocked or not
INT uxChOperState	1.3.6.1.4.1.177.15.1.5.6.1.6	INTEGER	read-only	Operational state of the channel. Indicates all the channel states similar to the channel monitor view on WEBUI.
C32 uxChInUseSeconds	1.3.6.1.4.1.177.15.1.5.6.1.7	Counter32	read-only	The number of channel inuse Seconds. Indicates the total accumulated channel connected time in seconds
uxSGStatsCurrentTable	1.3.6.1.4.1.177.15.1.5.7		not-accessible	The SG Current table contains various statistics being collected for the current 1 hour interval.
uxSGStatsCurrentEntry	1.3.6.1.4.1.177.15.1.5.7.1		not-accessible	An entry in the SG Current table.
INT uxSGCurrentIndex	1.3.6.1.4.1.177.15.1.5.7.1.1	INTEGER	read-only	The index value that uniquely identifies the signaling group to which this entry is applicable.
PER uxSGCurrentPeakChannelUsage	1.3.6.1.4.1.177.15.1.5.7.1.2	PerfCurrentCount	read-only	Peak Channel Usage count for the current interval.
PER uxSGCurrentCompletedCalls	1.3.6.1.4.1.177.15.1.5.7.1.3	PerfCurrentCount	read-only	Completed calls count for the current interval.
PER uxSGCurrentIncompleteCalls	1.3.6.1.4.1.177.15.1.5.7.1.4	PerfCurrentCount	read-only	Incomplete calls count for the current interval.
uxSGStatsIntervalTable	1.3.6.1.4.1.177.15.1.5.8		not-accessible	The SG interval Table contains various statistics collected by each of the Signalling Group over the previous 24 hours.
uxSGStatsIntervalEntry	1.3.6.1.4.1.177.15.1.5.8.1		not-accessible	An entry in the Signaling group Interval table
INT uxSGIntervalIndex	1.3.6.1.4.1.177.15.1.5.8.1.1	INTEGER	read-only	The index value that uniquely identifies the signaling group to which this entry is applicable.
INT uxSGIntervalNumber	1.3.6.1.4.1.177.15.1.5.8.1.2	INTEGER	read-only	A number between 1 and 24, where 1 is the most recently completed 1 hour interval and 24 is the 1 hour interval completed 23 hours prior to interval 1.
NUM uxSGIntervalPeakChannelUsage	1.3.6.1.4.1.177.15.1.5.8.1.3	PerfIntervalCount	read-only	Peak Channel Usage count.
NUM uxSGIntervalCompletedCalls	1.3.6.1.4.1.177.15.1.5.8.1.4	PerfIntervalCount	read-only	Completed calls count.
NUM uxSGIntervalIncompleteCalls	1.3.6.1.4.1.177.15.1.5.8.1.5	PerfIntervalCount	read-only	Incomplete calls count.
uxCallRtStatsCurrentTable	1.3.6.1.4.1.177.15.1.5.10		not-accessible	The Call Route Current table contains various statistics collected for the current 1 hour interval.
uxCallRtStatsCurrentEntry	1.3.6.1.4.1.177.15.1.5.10.1		not-accessible	An entry in the Call Route Current table
INT uxCallRtCurrentTablesIndex	1.3.6.1.4.1.177.15.1.5.10.1.1	INTEGER	read-only	The index value that uniquely identifies the call route table to which this entry is applicable.
INT uxCallRtCurrentEntryIndex	1.3.6.1.4.1.177.15.1.5.10.1.2	INTEGER	read-only	The index value that uniquely identifies the call route entry to which this entry is applicable.
PER uxCallRtCurrentRuleUsage	1.3.6.1.4.1.177.15.1.5.10.1.3	PerfCurrentCount	read-only	The number of times this call route has been selected for a call.
uxCallRtStatsIntervalTable	1.3.6.1.4.1.177.15.1.5.11		not-accessible	The Call Route Interval table contains various statistics collected by each call route over previous 24 hours. The past 24 hours are broken into 24 completed 1 hour intervals. Each row in this table represents one such interval.
uxCallRtStatsIntervalEntry	1.3.6.1.4.1.177.15.1.5.11.1		not-accessible	An entry in the Call Route Interval table.
INT uxCallRtIntervalTablesIndex	1.3.6.1.4.1.177.15.1.5.11.1.1	INTEGER	read-only	The index value that uniquely identifies the call route table to which this entry is applicable.
INT uxCallRtIntervalEntryIndex	1.3.6.1.4.1.177.15.1.5.11.1.2	INTEGER	read-only	The index value that uniquely identifies the call route table.
INT uxCallRtIntervalNumber	1.3.6.1.4.1.177.15.1.5.11.1.3	INTEGER	read-only	A number between 1 and 24, where 1 is the most recently completed 1 hour interval and 24 is the 1 hour interval completed 23 hours prior to interval 1.
NUM uxCallRtIntervalRuleUsage	1.3.6.1.4.1.177.15.1.5.11.1.4	PerfIntervalCount	read-only	The number of times this call route has been selected for a call.
uxCallRtStatsTotalTable	1.3.6.1.4.1.177.15.1.5.12		not-accessible	The Call Route Total table contains cumulative call route usage statistics for the past 24 hours.
uxCallRtStatsTotalEntry	1.3.6.1.4.1.177.15.1.5.12.1		not-accessible	An entry in the Call Route Total table
INT uxCallRtTotalTablesIndex	1.3.6.1.4.1.177.15.1.5.12.1.1	INTEGER	read-only	The index value that uniquely identifies the call route table to which this entry is applicable.
INT uxCallRtTotalEntryIndex	1.3.6.1.4.1.177.15.1.5.12.1.2	INTEGER	read-only	The index value that uniquely identifies the call route entry .
PER uxCallRtTotalRuleUsage	1.3.6.1.4.1.177.15.1.5.12.1.3	PerfTotalCount	read-only	The number of times this call route has been selected for a call.
uxLicenseStatsIntervalTable	1.3.6.1.4.1.177.15.1.5.13		not-accessible	The License Statistics Interval table contains various license statitics collected over the past 24 hours. The past 24 hours are broken into 24 completed 1 hour intervals. Each row in this table represents one such interval.
uxLicenseStatsIntervalEntry	1.3.6.1.4.1.177.15.1.5.13.1		not-accessible	An entry in the System Usage Interval table
INT uxLicenseIntervalNumber	1.3.6.1.4.1.177.15.1.5.13.1.1	INTEGER	read-only	A number between 1 and 24 where 1 is the most recently completed 1 hour interval and 24 is the 1 hour interval completed 23 hours prior to interval 1.
PER uxLicenseIntervalPeakSIPCall	1.3.6.1.4.1.177.15.1.5.13.1.2	PerfTotalCount	read-only	Peak value of used SIP call licenses.
PER uxLicenseIntervalPeakSIPRegistration	1.3.6.1.4.1.177.15.1.5.13.1.3	PerfTotalCount	read-only	Peak value of used SIP registration licenses.
PER uxLicenseIntervalPeakTDMChannel	1.3.6.1.4.1.177.15.1.5.13.1.4	PerfTotalCount	read-only	Peak value of used TDM channel licenses. 'No such object' will be returned if this attribute is requested.
PER uxLicenseIntervalPeakDSP	1.3.6.1.4.1.177.15.1.5.13.1.5	PerfTotalCount	read-only	Peak value of used DSP licenses.
uxSIPRegistrationsStatsCurrentTable	1.3.6.1.4.1.177.15.1.5.15		not-accessible	The SIP Registrations Curent table contains various statitics collected for the current 1 hour interval.
uxSIPRegistrationsStatsCurrentEntry	1.3.6.1.4.1.177.15.1.5.15.1		not-accessible	An entry in the SIP Registrations Current table.
INT uxSIPRegistrationsCurrentIndex	1.3.6.1.4.1.177.15.1.5.15.1.1	INTEGER	read-only	Identifies the SIP Registrations Table.
PER uxSIPRegistrationsCurrentPeakUsers	1.3.6.1.4.1.177.15.1.5.15.1.2	PerfCurrentCount	read-only	Peak number of registered endpoints in the registrar.
uxSIPRegistrationsStatsIntervalTable	1.3.6.1.4.1.177.15.1.5.16		not-accessible	The SIP Registrations Interval table contains various statitics collected by each registrar over the previous 24 hours. The past 24 hours are broken into 24 completed 1 hour intervals. Each row in this table represents one such interval.
uxSIPRegistrationsStatsIntervalEntry	1.3.6.1.4.1.177.15.1.5.16.1		not-accessible	An entry in the SIP Registrations Interval table
INT uxSIPRegistrationsIntervalIndex	1.3.6.1.4.1.177.15.1.5.16.1.1	INTEGER	read-only	Identifies the SIP Registrations Table.
INT uxSIPRegistrationsIntervalNumber	1.3.6.1.4.1.177.15.1.5.16.1.2	INTEGER	read-only	A number between 1 and 24 where 1 is the most recently completed 1 hour interval and 24 is the 1 hour interval completed 23 hours prior to interval 1.
NUM uxSIPRegistrationsIntervalPeakUsers	1.3.6.1.4.1.177.15.1.5.16.1.3	PerfIntervalCount	read-only	Peak number of registered endpoints in the registrar.
uxEthernetPortStatsIntervalTable	1.3.6.1.4.1.177.15.1.5.17		not-accessible	The Ethernet Port Stats table contains various statistics collected by each interface over the previoud 24 hours of operation. The past 24 hours are broken into 24 completed 1 hour intervals. Each row in this table represents one such interval .
uxEthernetPortStatsIntervalEntry	1.3.6.1.4.1.177.15.1.5.17.1		not-accessible	An entry in the Ethernet Port Stats Interval table
INT uxEthernetPortIntervalIndex	1.3.6.1.4.1.177.15.1.5.17.1.1	INTEGER	read-only	The Index value which identifies Ethernet Interface.
INT uxEthernetPortInterval	1.3.6.1.4.1.177.15.1.5.17.1.2	INTEGER	read-only	A number between 1 and 24 where 1 is the most recently completed 1 hour interval and 24 is the 1 hour interval completed 23 hours prior to interval 1.
NUM uxIntervalifInUcastPkts	1.3.6.1.4.1.177.15.1.5.17.1.3	PerfIntervalCount	read-only	Number of received unicast packets on this port.
NUM uxIntervalifInBroadcastPkts	1.3.6.1.4.1.177.15.1.5.17.1.4	PerfIntervalCount	read-only	Number of received broadcast packets on this port.
NUM uxIntervalifInMulticastPkts	1.3.6.1.4.1.177.15.1.5.17.1.5	PerfIntervalCount	read-only	Number of received multicast packets on this port.
NUM uxIntervalifInOctets	1.3.6.1.4.1.177.15.1.5.17.1.6	PerfIntervalCount	read-only	Number of received octets on this port.
NUM uxIntervalifInErrors	1.3.6.1.4.1.177.15.1.5.17.1.7	PerfIntervalCount	read-only	Number of errors detected on this port.
NUM uxIntervalifInDiscards	1.3.6.1.4.1.177.15.1.5.17.1.8	PerfIntervalCount	read-only	Number of discard errors detected on this port.
NUM uxIntervalifInUnknwnProto	1.3.6.1.4.1.177.15.1.5.17.1.9	PerfIntervalCount	read-only	Number of Unknown Protocol errors detected on this port.
NUM uxIntervalifInUndersizedPkts	1.3.6.1.4.1.177.15.1.5.17.1.10	PerfIntervalCount	read-only	Number of Undersized Packet errors detected on this port.
NUM uxIntervalifInOverSizedPkts	1.3.6.1.4.1.177.15.1.5.17.1.11	PerfIntervalCount	read-only	Number of Oversized Packet errors detected on this port.
NUM uxIntervalifInFCSErrors	1.3.6.1.4.1.177.15.1.5.17.1.12	PerfIntervalCount	read-only	Number of discard Frame Check Sequence errors detected on this port.
NUM uxIntervalifInAlignErrors	1.3.6.1.4.1.177.15.1.5.17.1.13	PerfIntervalCount	read-only	Number of Align errors detected on this port.
NUM uxIntervalifInFragmentedPkts	1.3.6.1.4.1.177.15.1.5.17.1.14	PerfIntervalCount	read-only	Number of Fragmented Packet errors detected on this port.
NUM uxIntervalifOutUcastPkts	1.3.6.1.4.1.177.15.1.5.17.1.15	PerfIntervalCount	read-only	Number of transmitted unicast packets on this port.
NUM uxIntervalifOutOctets	1.3.6.1.4.1.177.15.1.5.17.1.16	PerfIntervalCount	read-only	Number of transmitted octets on this port.
NUM uxIntervalifOutBroadcastPkts	1.3.6.1.4.1.177.15.1.5.17.1.17	PerfIntervalCount	read-only	Number of transmitted broadcast packets on this port.
NUM uxIntervalifOutMulticastPkts	1.3.6.1.4.1.177.15.1.5.17.1.18	PerfIntervalCount	read-only	Number of transmitted multicast packets on this port.
NUM uxIntervalifOutErrors	1.3.6.1.4.1.177.15.1.5.17.1.19	PerfIntervalCount	read-only	Number of errors detected on this port.
NUM uxIntervalifOutDiscards	1.3.6.1.4.1.177.15.1.5.17.1.20	PerfIntervalCount	read-only	Number of discard errors detected on this port.
NUM uxIntervalifOutLateCollissions	1.3.6.1.4.1.177.15.1.5.17.1.21	PerfIntervalCount	read-only	Number of Late Collision errors detected on this port.
NUM uxIntervalifOutDeferredTransmissions	1.3.6.1.4.1.177.15.1.5.17.1.22	PerfIntervalCount	read-only	Number of Deferred Transmission errors detected on this port.
uxEthernetPortStatsCurrentTable	1.3.6.1.4.1.177.15.1.5.18		not-accessible	The Ethernet Port Stats table contains various statistics being collected for the 1 hour interval.
uxEthernetPortStatsCurrentEntry	1.3.6.1.4.1.177.15.1.5.18.1		not-accessible	An entry in the Ethernet Port Stats Interval table
INT uxEthernetPortCurrentIndex	1.3.6.1.4.1.177.15.1.5.18.1.1	INTEGER	read-only	The Index value which identifies Ethernet Interface.
PER uxCurrentifInUcastPkts	1.3.6.1.4.1.177.15.1.5.18.1.2	PerfCurrentCount	read-only	Number of received unicast packets on this port.
PER uxCurrentifInBroadcastPkts	1.3.6.1.4.1.177.15.1.5.18.1.3	PerfCurrentCount	read-only	Number of received broadcast packets on this port.
PER uxCurrentifInMulticastPkts	1.3.6.1.4.1.177.15.1.5.18.1.4	PerfCurrentCount	read-only	Number of received multicast packets on this port.
PER uxCurrentifInOctets	1.3.6.1.4.1.177.15.1.5.18.1.5	PerfCurrentCount	read-only	Number of received octets on this port.
PER uxCurrentifInErrors	1.3.6.1.4.1.177.15.1.5.18.1.6	PerfCurrentCount	read-only	Number of errors detected on this port.
PER uxCurrentifInDiscards	1.3.6.1.4.1.177.15.1.5.18.1.7	PerfCurrentCount	read-only	Number of discard errors detected on this port.
PER uxCurrentifInUnknwnProto	1.3.6.1.4.1.177.15.1.5.18.1.8	PerfCurrentCount	read-only	Number of Unknown Protocol errors detected on this port.
PER uxCurrentifInUndersizedPkts	1.3.6.1.4.1.177.15.1.5.18.1.9	PerfCurrentCount	read-only	Number of Undersized Packet errors detected on this port.
PER uxCurrentifInOverSizedPkts	1.3.6.1.4.1.177.15.1.5.18.1.10	PerfCurrentCount	read-only	Number of Oversized Packet errors detected on this port.
PER uxCurrentifInFCSErrors	1.3.6.1.4.1.177.15.1.5.18.1.11	PerfCurrentCount	read-only	Number of discard Frame Check Sequence errors detected on this port.
PER uxCurrentifInAlignErrors	1.3.6.1.4.1.177.15.1.5.18.1.12	PerfCurrentCount	read-only	Number of Align errors detected on this port.
PER uxCurrentifInFragmentedPkts	1.3.6.1.4.1.177.15.1.5.18.1.13	PerfCurrentCount	read-only	Number of Fragmented Packet errors detected on this port.
PER uxCurrentifOutUcastPkts	1.3.6.1.4.1.177.15.1.5.18.1.14	PerfCurrentCount	read-only	Number of transmitted unicast packets on this port.
PER uxCurrentifOutOctets	1.3.6.1.4.1.177.15.1.5.18.1.15	PerfCurrentCount	read-only	Number of transmitted octets on this port.
PER uxCurrentifOutBroadcastPkts	1.3.6.1.4.1.177.15.1.5.18.1.16	PerfCurrentCount	read-only	Number of transmitted broadcast packets on this port.
PER uxCurrentifOutMulticastPkts	1.3.6.1.4.1.177.15.1.5.18.1.17	PerfCurrentCount	read-only	Number of transmitted multicast packets on this port.
PER uxCurrentifOutErrors	1.3.6.1.4.1.177.15.1.5.18.1.18	PerfCurrentCount	read-only	Number of errors detected on this port.
PER uxCurrentifOutDiscards	1.3.6.1.4.1.177.15.1.5.18.1.19	PerfCurrentCount	read-only	Number of discard errors detected on this port.
PER uxCurrentifOutLateCollissions	1.3.6.1.4.1.177.15.1.5.18.1.20	PerfCurrentCount	read-only	Number of Late Collision errors detected on this port.
PER uxCurrentifOutDeferredTransmissions	1.3.6.1.4.1.177.15.1.5.18.1.21	PerfCurrentCount	read-only	Number of Deferred Transmission errors detected on this port.
uxGlobalCallCounters	1.3.6.1.4.1.177.15.1.5.19
INT uxNumCallAttempts	1.3.6.1.4.1.177.15.1.5.19.1	INTEGER	read-only	Total number of call attempts system wide since system came up.
INT uxNumCallSucceeded	1.3.6.1.4.1.177.15.1.5.19.2	INTEGER	read-only	Total number of successfull calls system wide since system came up.
INT uxNumCallFailed	1.3.6.1.4.1.177.15.1.5.19.3	INTEGER	read-only	Total number of failed calls system wide since system came up.
INT uxNumCallCurrentlyUp	1.3.6.1.4.1.177.15.1.5.19.4	INTEGER	read-only	Number of currently connected calls system wide.
INT uxNumCallCurrentlyTransient	1.3.6.1.4.1.177.15.1.5.19.5	INTEGER	read-only	Number of transient calls (setup, progress, alerting state) system wide.
INT uxNumInternalGlares	1.3.6.1.4.1.177.15.1.5.19.6	INTEGER	read-only	Number of internal glares system wide since system came up.
INT uxNumExternalGlares	1.3.6.1.4.1.177.15.1.5.19.7	INTEGER	read-only	Number of external glares system wide since system came up.
INT uxNumCallAbandonedNoTrunk	1.3.6.1.4.1.177.15.1.5.19.8	INTEGER	read-only	Number of rejected calls due to no channel available system wide since system came up.
INT uxNumCallUnAnswered	1.3.6.1.4.1.177.15.1.5.19.9	INTEGER	read-only	Number of unanswered calls system wide since system came up.
uxTraps	1.3.6.1.4.1.177.15.2

RFC description

Vendor-private Ribbon Communications SBC MIB containing call statistics data for Session Border Controllers (SBC) 1000/2000 series.

Start monitoring Sonus Networks (net.com) Session Border Controller gateways (per-port/SIP call attempt/completion-rate status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UX-CALL-STATS-MIB