All MIBs › SENAO-EOR7550-MIB
Organization: Senao R&D Dept., S/W Division
Last Updated: 2005-11-25
Description: Senao EOR7550 IEEE 802.11 wireless router MIB covering LAN, WAN, WLAN radio, and MAC filtering objects on Senao/Sendfar wireless router devices
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SENAO-EOR7550-MIB?
SENAO-EOR7550-MIB is a vendor-specific module from Senao (also marketed under the Sendfar brand) for the EOR7550 IEEE 802.11 wireless router, supplementing the standard IEEE 802.11 MIB with implementation-specific metrics. It covers configuration and status across the device's LAN, WAN, and WLAN radio interfaces, as well as MAC address filtering rules used for wireless access control. Its monitoring value lies in tracking wireless-specific software/hardware state such as radio operating parameters, WAN connection status, and which client MAC addresses are permitted or blocked, complementing generic interface counters with 802.11-specific detail. As stated in its description, it is explicitly a supplement to the IEEE 802.11 standard MIB, so it is expected to be used alongside that standard module rather than in isolation. It is deployed on Senao/Sendfar branded wireless routers and access points, typically in small-to-medium wireless network deployments. Engineers can download the SENAO-EOR7550-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SENAO-EOR7550-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Senao/Sendfar EOR7550 wireless router
Monitoring Examples
No specific object or table names were retained in this extract, so a concrete monitoring walk cannot be grounded in real identifiers; in line with the stated purpose, an administrator would typically poll WLAN radio configuration/status objects to confirm the radio is up and operating on the expected channel, and check the MAC filtering table to verify only authorized client MAC addresses are permitted.
What Can Be Monitored
- WLAN radio configuration/status
- WAN connection status
- LAN interface status
- MAC address filtering list
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-SMI
| Counter32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| enterprises |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| senao | 1.3.6.1.4.1.14125 | The MIB module defines Senao implementation-specific metrics useful in managing IEEE 802.11 on Senao devices. This is used as a supplement to the standard 802.11 MIB proposed by IEEE. | ||
| eor7550 | 1.3.6.1.4.1.14125.101 | |||
| entSystem | 1.3.6.1.4.1.14125.101.1 | |||
| STR entPassword | 1.3.6.1.4.1.14125.101.1.2 | DisplayString | write-only | Administration password |
| STR entSysModel | 1.3.6.1.4.1.14125.101.1.3 | DisplayString | read-only | System model |
| INT entSysMode | 1.3.6.1.4.1.14125.101.1.4 | INTEGER | read-only | System mode, 0:AP router, 1:Repeater, 2: AP bridge, 3: Client bridge, 4: Client router, 5: WDS bridge, 6: AP router repeater, 7: WDS repeater, 8: WDS router repeater |
| TIK entSysUpTime | 1.3.6.1.4.1.14125.101.1.5 | TimeTicks | read-only | System uptime |
| STR entHwVersion | 1.3.6.1.4.1.14125.101.1.6 | DisplayString | read-only | The version of the hardware |
| STR entSN | 1.3.6.1.4.1.14125.101.1.7 | DisplayString | read-only | Serial Number |
| STR entKenelVersion | 1.3.6.1.4.1.14125.101.1.8 | DisplayString | read-only | The version of the kernel |
| STR entAppVersion | 1.3.6.1.4.1.14125.101.1.9 | DisplayString | read-only | The version of the system application |
| T/F entReset | 1.3.6.1.4.1.14125.101.1.10 | TruthValue | write-only | Setting this attribute TRUE causes the AP rebooted |
| T/F entResetToDefault | 1.3.6.1.4.1.14125.101.1.11 | TruthValue | write-only | Setting this attribute TRUE will Reboot the system and change settings to factory default |
| T/F entApplyModules | 1.3.6.1.4.1.14125.101.1.12 | TruthValue | write-only | Setting this attribute TRUE will apply the changed modules to reload |
| entLAN | 1.3.6.1.4.1.14125.101.2 | |||
| IP entLANIP | 1.3.6.1.4.1.14125.101.2.1 | IpAddress | read-write | LAN IP address |
| IP entLANSubnetMask | 1.3.6.1.4.1.14125.101.2.2 | IpAddress | read-write | LAN subnet mask |
| T/F entSTPEnable | 1.3.6.1.4.1.14125.101.2.3 | TruthValue | read-write | Set this attribute TUUE will enable 802.1d Spanning Tree. |
| T/F entDHCPEnable | 1.3.6.1.4.1.14125.101.2.4 | TruthValue | read-write | When system mode is not 1(Repeater) and 5(WDS bridge), set this attribute TUUE will enable the DHCP server function of device |
| IP entIPPoolStart | 1.3.6.1.4.1.14125.101.2.5 | IpAddress | read-write | TWhen system mode is not 1(Repeater) and 5(WDS bridge), set the start address of DHCP IP pool |
| IP entIPPoolEnd | 1.3.6.1.4.1.14125.101.2.6 | IpAddress | read-write | When system mode is not 1(Repeater) and 5(WDS bridge), set the end address of DHCP IP pool |
| INT entIPLeaseTime | 1.3.6.1.4.1.14125.101.2.7 | INTEGER | read-write | When system mode is not 1(Repeater) and 5(WDS bridge), the time period client can have the IP address assigned by DHCP server 0(half hour), 1(one hour) 2(two hours), 3(half day), 4(one day), 5(two days), 6(one week), 7(two weeks), 8(forever) |
| entWAN | 1.3.6.1.4.1.14125.101.3 | |||
| T/F entRouterEnable | 1.3.6.1.4.1.14125.101.3.1 | TruthValue | read-write | Only When op mode is 0(AP) or (Client bridge), can set this attribute. Set TUUE will enable the router. |
| entMacFilter | 1.3.6.1.4.1.14125.101.4 | |||
| T/F entLanMacFilteringEnable | 1.3.6.1.4.1.14125.101.4.1 | TruthValue | read-write | Set this attribute TUUE will enable the LAN MAC filtering |
| INT entLanMacFilteringMode | 1.3.6.1.4.1.14125.101.4.2 | INTEGER | read-write | The mode of LAN MAC filtering can be 0(white list), 1(black list) |
| entLanMacFilterTable | 1.3.6.1.4.1.14125.101.4.3 | not-accessible | This table provides one row for each LAN MAC filtering. Each row contains the enterprise LAN MAC filtering table for that LAN MAC filtering. | |
| entLanMacFilterEntry | 1.3.6.1.4.1.14125.101.4.3.1 | not-accessible | An entry in the entLanMacFilterTable. | |
| INT entMacAddressIndex | 1.3.6.1.4.1.14125.101.4.3.1.1 | INTEGER | read-only | The auxiliary variable used to identify instances of columnar objects in the LAN MAC Filtering Table |
| STR entMacAddress | 1.3.6.1.4.1.14125.101.4.3.1.2 | DisplayString | read-only | MAC address list in the LAN MAC filtering table |
| T/F entMacFilteringValid | 1.3.6.1.4.1.14125.101.4.3.1.3 | TruthValue | read-only | The validity status of each corresponding MAC address in LAN MAC filtering table |
| entRalinkWlan | 1.3.6.1.4.1.14125.101.5 | |||
| entWlanCommonInfo | 1.3.6.1.4.1.14125.101.5.1 | |||
| INT entOpMode | 1.3.6.1.4.1.14125.101.5.1.1 | INTEGER | read-only | Get op mode: 0(AP), 1(Client bridge), 2(Client router), 3(WDS bridge), 4(WDS repeater), 5(Repeater ap), 6(Repeater station), 7(Disable) |
| T/F entRadio | 1.3.6.1.4.1.14125.101.5.1.2 | TruthValue | read-write | Set this attribute TUUE will enable the radio |
| INT entBand | 1.3.6.1.4.1.14125.101.5.1.4 | INTEGER | read-write | The wireless mode: 0(802.11 b/g), 1(802.11 b), 4(802.11 g), 6(802.11 n), 9(802.11 b/g/n) |
| INT entESSIDNum | 1.3.6.1.4.1.14125.101.5.1.5 | INTEGER | read-write | Only when op mode for Ralink is 0(AP) and 5(Repeater AP), support multiple ESSID. Set the Number of multiple ESSID |
| INT entChannel | 1.3.6.1.4.1.14125.101.5.1.6 | INTEGER | read-write | Only when op mode for Ralink is 0(AP), 3(WDS bridge), 4(WDS repeater) and 5(Repeater AP), the current operating frequency channel |
| INT entDataRate | 1.3.6.1.4.1.14125.101.5.1.7 | INTEGER | read-write | This attribute specifies the data rate at which the station may transmit data in Mbps 0(Auto), 1(1Mbps), 2(2Mbps), 5(5.5Mbps), 11(11Mbps), 6(6Mbps), 9(9Mbps), 12(12Mbps), 18(18Mbps), 24(24Mbps), 36(36Mbps), 48(48Mbps), 54(54Mbps) |
| INT entNDataRate | 1.3.6.1.4.1.14125.101.5.1.8 | INTEGER | read-write | This attribute specifies the 11n data rate |
| INT entTxPower | 1.3.6.1.4.1.14125.101.5.1.9 | INTEGER | read-write | The transmit power level: 10(%), 25(%), 50(%), 75(%), 90(%), 100(%) |
| INT entBeaconInterval | 1.3.6.1.4.1.14125.101.5.1.10 | INTEGER | read-write | This attribute specifies the number of TU that a station shall use for scheduling Beacon transmissions |
| INT entDTIMPeriod | 1.3.6.1.4.1.14125.101.5.1.11 | INTEGER | read-write | This attribute specifies the number of beacon intervals |
| INT entFragmentationThreshold | 1.3.6.1.4.1.14125.101.5.1.12 | INTEGER | read-write | This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY |
| INT entRTSThreshold | 1.3.6.1.4.1.14125.101.5.1.13 | INTEGER | read-write | This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. |
| INT entChannelBandwidth | 1.3.6.1.4.1.14125.101.5.1.14 | INTEGER | read-write | This attribute specifies the channel bandwidth: 0(Auto 20/40 MHZ), 1(20 MHZ) |
| INT entPreambleType | 1.3.6.1.4.1.14125.101.5.1.15 | INTEGER | read-write | This attribute specifies the preamble type: 1(Short), 2(Long) |
| INT entCTSProtection | 1.3.6.1.4.1.14125.101.5.1.16 | INTEGER | read-write | This attribute specifies the CTS protection: 0(Auto), 1(Always), 2(None) |
| entWlanESSIDInfoTable | 1.3.6.1.4.1.14125.101.5.2 | not-accessible | This table provides one row for each ESSID information. Each row contains the enterprise ESSID information Table for that ESSID information. | |
| entWlanESSIDInfoEntry | 1.3.6.1.4.1.14125.101.5.2.1 | not-accessible | An entry in the entWlanESSIDInfoTable. | |
| INT entWlanESSIDInfoIndex | 1.3.6.1.4.1.14125.101.5.2.1.1 | INTEGER | read-only | The auxiliary variable used to identify instances of columnar objects in the ESSID information Table |
| OCT entESSID | 1.3.6.1.4.1.14125.101.5.2.1.2 | OCTET STRING | read-write | This attribute reflects the Service Set ID used in the Desired- SSID parameter of the most recent MLME_Scan.request |
| T/F entBroadcastESSID | 1.3.6.1.4.1.14125.101.5.2.1.3 | TruthValue | read-write | Set this attribute TUUE will enable the hidden SSID |
| T/F entWMM | 1.3.6.1.4.1.14125.101.5.2.1.4 | TruthValue | read-write | Set this attribute TUUE will enable WMM |
| INT entEncryption | 1.3.6.1.4.1.14125.101.5.2.1.5 | INTEGER | read-write | The WLAN encryption: 0(none), 1(WEP), 2(TKIP), 3(AES), 4(TKIPAES) |
| INT entWlanAuthenticationType | 1.3.6.1.4.1.14125.101.5.2.1.6 | INTEGER | read-write | The current authentication algorithms: 0 (openSystem), 1(wepAuto), 2(sharedKey), 3(WPAPSK), 4(WPA), 5(WPA2PSK), 6(WPA2), 7(WPA1WPA2), 8(WPA1PSKWPA2PSK) |
| entWlanWepInfoTable | 1.3.6.1.4.1.14125.101.5.3 | not-accessible | This table provides one row for each WEP information. Each row contains the enterprise WEP information Table for that WEP information. | |
| entWlanWepInfoEntry | 1.3.6.1.4.1.14125.101.5.3.1 | not-accessible | An entry in the entWlanWepInfoTable. | |
| INT entWlanESSIDIndex | 1.3.6.1.4.1.14125.101.5.3.1.1 | INTEGER | read-only | The auxiliary variable used to identify instances of columnar objects in the WEP information Table |
| INT entWlanWepKeyID | 1.3.6.1.4.1.14125.101.5.3.1.2 | INTEGER | read-write | This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array |
| OCT entWlanWepKey1Value | 1.3.6.1.4.1.14125.101.5.3.1.3 | OCTET STRING | read-write | Set key1 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| OCT entWlanWepKey2Value | 1.3.6.1.4.1.14125.101.5.3.1.4 | OCTET STRING | read-write | Set key2 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| OCT entWlanWepKey3Value | 1.3.6.1.4.1.14125.101.5.3.1.5 | OCTET STRING | read-write | Set key3 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| OCT entWlanWepKey4Value | 1.3.6.1.4.1.14125.101.5.3.1.6 | OCTET STRING | read-write | Set key4 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| entWlanWPAInfoTable | 1.3.6.1.4.1.14125.101.5.4 | not-accessible | This table provides one row for each WPA information. Each row contains the enterprise WPA information Table for that WPA information. | |
| entWlanWPAInfoEntry | 1.3.6.1.4.1.14125.101.5.4.1 | not-accessible | An entry in the entWlanWPAInfoTable. | |
| INT entWlanWPAInfoEntryEntWlanESSIDIndex | 1.3.6.1.4.1.14125.101.5.4.1.1 | INTEGER | read-only | The auxiliary variable used to identify instances of columnar objects in the WPA information Table |
| STR entPresharedKey | 1.3.6.1.4.1.14125.101.5.4.1.2 | DisplayString | write-only | The WPA Pre-Shared key. (8~63 ASCII or 64 HEX) |
| ent802dot1xInfoTable | 1.3.6.1.4.1.14125.101.5.5 | not-accessible | This table provides one row for each 802.1x information. Each row contains the enterprise 802.1x information Table for that 802.1x information. | |
| ent802dot1xInfoEntry | 1.3.6.1.4.1.14125.101.5.5.1 | not-accessible | An entry in the ent802dot1xInfoTable. | |
| INT ent802dot1xInfoEntryEntWlanESSIDIndex | 1.3.6.1.4.1.14125.101.5.5.1.1 | INTEGER | read-only | The auxiliary variable used to identify instances of columnar objects in the 802.1x information Table |
| IP entRADIUSServerIPAddress | 1.3.6.1.4.1.14125.101.5.5.1.2 | IpAddress | read-write | The address of RADIUS Server |
| INT entRADIUSServerPort | 1.3.6.1.4.1.14125.101.5.5.1.3 | INTEGER | read-write | The port of RADIUS Server |
| STR entRADIUSServerPassword | 1.3.6.1.4.1.14125.101.5.5.1.4 | DisplayString | write-only | The password of RADIUS Server |
| T/F entWlan802dot1xEnable | 1.3.6.1.4.1.14125.101.5.5.1.5 | TruthValue | read-write | Set this attribute TUUE will enable 802.1x |
| entSNMP | 1.3.6.1.4.1.14125.101.6 | |||
| T/F entSNMPStatus | 1.3.6.1.4.1.14125.101.6.1 | TruthValue | read-write | The status of current SNMP agent.0:disable, 1:Enable |
| INT entSNMPVerType | 1.3.6.1.4.1.14125.101.6.2 | INTEGER | read-write | The version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3 |
| entSNMPCommunityTable | 1.3.6.1.4.1.14125.101.6.3 | not-accessible | This table provides one row for each SNMP community. Each row contains the enterprise SNMP community table for that SNMP community. | |
| entSNMPCommunityEntry | 1.3.6.1.4.1.14125.101.6.3.1 | not-accessible | An entry in the entSNMPCommunityTable. | |
| INT entSNMPCommunityIndex | 1.3.6.1.4.1.14125.101.6.3.1.1 | INTEGER | read-only | The auxiliary variable used to identify instances of columnar objects in the SNMP Community Table |
| STR entSNMPCommunityName | 1.3.6.1.4.1.14125.101.6.3.1.2 | DisplayString | read-write | The community name used to access SNMP device. |
| INT entSNMPCommunityType | 1.3.6.1.4.1.14125.101.6.3.1.3 | INTEGER | read-only | The auxiliary variable used to identify instances of columnar objects in the SNMP Community Table |
| T/F entSNMPCommunityValid | 1.3.6.1.4.1.14125.101.6.3.1.4 | TruthValue | read-only | Display the validity information of corresponding community index |
| entSNMPTrap | 1.3.6.1.4.1.14125.101.6.4 | |||
| T/F entTrapStatus | 1.3.6.1.4.1.14125.101.6.4.1 | TruthValue | read-write | The trap status of current SNMP agent.0:disable, 1:Enable |
| INT entTrapVer | 1.3.6.1.4.1.14125.101.6.4.2 | INTEGER | read-write | The trap version of current SNMP agent.0:all, 1: v1, 2:v2c, 3:v3 |
| IP entTrapReceiverIPAddress | 1.3.6.1.4.1.14125.101.6.4.3 | IpAddress | read-write | Specify the IP address(host) to receive the trap report |
| STR entTrapReceiverCommunityName | 1.3.6.1.4.1.14125.101.6.4.4 | DisplayString | read-write | Specify the community name for SNMP manager to receive the trap report |
| entAthWlan | 1.3.6.1.4.1.14125.101.7 | |||
| entAthWlanCommonInfo | 1.3.6.1.4.1.14125.101.7.1 | |||
| INT entAthWlanCommonInfoEntOpMode | 1.3.6.1.4.1.14125.101.7.1.1 | INTEGER | read-only | Get op mode: 0(AP), 1(Client bridge), 2(Client router), 3(WDS bridge), 4(WDS repeater), 5(Repeater ap), 6(Repeater station), 7(Disable) |
| INT entAthWlanCommonInfoEntBand | 1.3.6.1.4.1.14125.101.7.1.4 | INTEGER | read-write | The wireless mode: 0(802.11 b/g), 1(802.11 b), 2(802.11 a), 4(802.11 g) |
| INT entAthWlanCommonInfoEntESSIDNum | 1.3.6.1.4.1.14125.101.7.1.5 | INTEGER | read-write | Only when op mode for Atheros is 0(AP), set the Number of multiple ESSID |
| INT entAthWlanCommonInfoEntChannel | 1.3.6.1.4.1.14125.101.7.1.6 | INTEGER | read-write | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The current operating frequency channel |
| INT entAthWlanCommonInfoEntDataRate | 1.3.6.1.4.1.14125.101.7.1.7 | INTEGER | read-write | This attribute specifies the data rate at which the station may transmit data in Mbps 0(Auto), 1(1Mbps), 2(2Mbps), 5(5.5Mbps), 11(11Mbps), 6(6Mbps), 9(9Mbps), 12(12Mbps), 18(18Mbps), 24(24Mbps), 36(36Mbps), 48(48Mbps), 54(54Mbps) |
| INT entAthWlanCommonInfoEntTxPower | 1.3.6.1.4.1.14125.101.7.1.9 | INTEGER | read-write | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The transmit power level: 10(%), 25(%), 50(%), 75(%), 90(%), 100(%) |
| INT entAthWlanCommonInfoEntBeaconInterval | 1.3.6.1.4.1.14125.101.7.1.10 | INTEGER | read-write | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), This attribute specifies the number of TU that a station shall use for scheduling Beacon transmissions |
| INT entAthWlanCommonInfoEntDTIMPeriod | 1.3.6.1.4.1.14125.101.7.1.11 | INTEGER | read-write | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), This attribute specifies the number of beacon intervals |
| INT entAthWlanCommonInfoEntFragmentationThreshold | 1.3.6.1.4.1.14125.101.7.1.12 | INTEGER | read-write | This attribute shall specify the current maximum size, in octets, of the MPDU that may be delivered to the PHY |
| INT entAthWlanCommonInfoEntRTSThreshold | 1.3.6.1.4.1.14125.101.7.1.13 | INTEGER | read-write | This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. |
| INT entAthWlanCommonInfoEntPreambleType | 1.3.6.1.4.1.14125.101.7.1.15 | INTEGER | read-write | This attribute specifies the preamble type: 1(Short), 2(Long) |
| INT entAthWlanCommonInfoEntCTSProtection | 1.3.6.1.4.1.14125.101.7.1.16 | INTEGER | read-write | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), This attribute specifies the CTS protection: 0(Auto), 1(Always), 2(None) |
| INT entDistance | 1.3.6.1.4.1.14125.101.7.1.17 | INTEGER | read-write | ACK timeout |
| entAthWlanESSIDInfoTable | 1.3.6.1.4.1.14125.101.7.2 | not-accessible | This table provides one row for each ESSID information. Each row contains the enterprise ESSID information Table for that ESSID information. | |
| entAthWlanESSIDInfoEntry | 1.3.6.1.4.1.14125.101.7.2.1 | not-accessible | An entry in the entWlanESSIDInfoTable. | |
| INT entAthWlanESSIDInfoEntryEntWlanESSIDInfoIndex | 1.3.6.1.4.1.14125.101.7.2.1.1 | INTEGER | read-only | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The auxiliary variable used to identify instances of columnar objects in the ESSID information Table |
| OCT entAthWlanESSIDInfoEntryEntESSID | 1.3.6.1.4.1.14125.101.7.2.1.2 | OCTET STRING | read-write | Only when op mode for Atheros is 0(AP), This attribute reflects the Service Set ID used in the Desired- SSID parameter of the most recent MLME_Scan.request |
| T/F entAthWlanESSIDInfoEntryEntBroadcastESSID | 1.3.6.1.4.1.14125.101.7.2.1.3 | TruthValue | read-write | Only when op mode for Atheros is 0(AP), Set this attribute TUUE will enable the hidden SSID |
| T/F entAthWlanESSIDInfoEntryEntWMM | 1.3.6.1.4.1.14125.101.7.2.1.4 | TruthValue | read-write | Only when op mode for Atheros is 0(AP), Set this attribute TUUE will enable WMM |
| INT entAthWlanESSIDInfoEntryEntEncryption | 1.3.6.1.4.1.14125.101.7.2.1.5 | INTEGER | read-write | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The WLAN encryption: 0(none), 1(WEP), 2(TKIP), 3(AES), 4(TKIPAES) |
| INT entAthWlanESSIDInfoEntryEntWlanAuthenticationType | 1.3.6.1.4.1.14125.101.7.2.1.6 | INTEGER | read-write | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The current authentication algorithms: 0 (openSystem), 1(wepAuto), 2(sharedKey), 3(WPAPSK), 4(WPA), 5(WPA2PSK), 6(WPA2), 7(WPA1WPA2), 8(WPA1PSKWPA2PSK) |
| entAthWlanWepInfoTable | 1.3.6.1.4.1.14125.101.7.3 | not-accessible | This table provides one row for each WEP information. Each row contains the enterprise WEP information Table for that WEP information. | |
| entAthWlanWepInfoEntry | 1.3.6.1.4.1.14125.101.7.3.1 | not-accessible | An entry in the entWlanWepInfoTable. | |
| INT entAthWlanWepInfoEntryEntWlanESSIDIndex | 1.3.6.1.4.1.14125.101.7.3.1.1 | INTEGER | read-only | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The auxiliary variable used to identify instances of columnar objects in the WEP information Table |
| INT entAthWlanWepInfoEntryEntWlanWepKeyID | 1.3.6.1.4.1.14125.101.7.3.1.2 | INTEGER | read-write | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array |
| OCT entAthWlanWepInfoEntryEntWlanWepKey1Value | 1.3.6.1.4.1.14125.101.7.3.1.3 | OCTET STRING | read-write | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), Set key1 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| OCT entAthWlanWepInfoEntryEntWlanWepKey2Value | 1.3.6.1.4.1.14125.101.7.3.1.4 | OCTET STRING | read-write | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), Set key2 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| OCT entAthWlanWepInfoEntryEntWlanWepKey3Value | 1.3.6.1.4.1.14125.101.7.3.1.5 | OCTET STRING | read-write | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), Set key3 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| OCT entAthWlanWepInfoEntryEntWlanWepKey4Value | 1.3.6.1.4.1.14125.101.7.3.1.6 | OCTET STRING | read-write | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), Set key4 string. (5 or 13 ASCCI characters, 10 or 26 hex numbers) |
| entAthWlanWPAInfoTable | 1.3.6.1.4.1.14125.101.7.4 | not-accessible | This table provides one row for each WPA information. Each row contains the enterprise WPA information Table for that WPA information. | |
| entAthWlanWPAInfoEntry | 1.3.6.1.4.1.14125.101.7.4.1 | not-accessible | An entry in the entWlanWPAInfoTable. | |
| INT entAthWlanWPAInfoEntryEntWlanESSIDIndex | 1.3.6.1.4.1.14125.101.7.4.1.1 | INTEGER | read-only | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The auxiliary variable used to identify instances of columnar objects in the WPA information Table |
| STR entAthWlanWPAInfoEntryEntPresharedKey | 1.3.6.1.4.1.14125.101.7.4.1.2 | DisplayString | write-only | Only when op mode for Atheros is 0(AP), 3(WDS Bridge) and 4(WDS Repeater), The WPA Pre-Shared key. (8~63 ASCII or 64 HEX) |
| entAth802dot1xInfoTable | 1.3.6.1.4.1.14125.101.7.5 | not-accessible | This table provides one row for each 802.1x information. Each row contains the enterprise 802.1x information Table for that 802.1x information. | |
| entAth802dot1xInfoEntry | 1.3.6.1.4.1.14125.101.7.5.1 | not-accessible | An entry in the ent802dot1xInfoTable. | |
| INT entAth802dot1xInfoEntryEntWlanESSIDIndex | 1.3.6.1.4.1.14125.101.7.5.1.1 | INTEGER | read-only | Only when op mode for Atheros is 0(AP), The auxiliary variable used to identify instances of columnar objects in the 802.1x information Table |
| IP entAth802dot1xInfoEntryEntRADIUSServerIPAddress | 1.3.6.1.4.1.14125.101.7.5.1.2 | IpAddress | read-write | Only when op mode for Atheros is 0(AP), The address of RADIUS Server |
| INT entAth802dot1xInfoEntryEntRADIUSServerPort | 1.3.6.1.4.1.14125.101.7.5.1.3 | INTEGER | read-write | Only when op mode for Atheros is 0(AP), The port of RADIUS Server |
| STR entAth802dot1xInfoEntryEntRADIUSServerPassword | 1.3.6.1.4.1.14125.101.7.5.1.4 | DisplayString | write-only | Only when op mode for Atheros is 0(AP), The password of RADIUS Server |
| T/F entAth802dot1xInfoEntryEntWlan802dot1xEnable | 1.3.6.1.4.1.14125.101.7.5.1.5 | TruthValue | read-write | Only when op mode for Atheros is 0(AP), Set this attribute TUUE will enable 802.1x |
| entTraps | 1.3.6.1.4.1.14125.101.20 | |||
| entSystemTraps | 1.3.6.1.4.1.14125.101.20.1 | |||
| NTF entSystemTrapsReboot | 1.3.6.1.4.1.14125.101.20.1.1 | The trap is generated when the system is rebooted. | ||
| NTF entSystemTrapsRestoreToDefault | 1.3.6.1.4.1.14125.101.20.1.2 | The trap is generated when the default configuration of the system is restored. | ||
| NTF entSystemTrapsReloadModules | 1.3.6.1.4.1.14125.101.20.1.3 | The trap is generated when the system modules are reloaded. | ||
| entWanTraps | 1.3.6.1.4.1.14125.101.20.2 | |||
| NTF entWanTrapsLinkDisconnect | 1.3.6.1.4.1.14125.101.20.2.1 | The trap is generated when the PHY of WAN is disconnected and it was connected. | ||
| NTF entWanTrapsLinkRecover | 1.3.6.1.4.1.14125.101.20.2.2 | The trap is generated when the PHY of WAN is connected and it was disconnected |
RFC description
Manages Senao EOR7550 IEEE 802.11 wireless router metrics including LAN/WAN configuration and MAC filtering.
Start monitoring Senao/Sendfar EOR7550 wireless router (LAN/WAN/WLAN interface and MAC-filter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.