All MIBs › US-HIQ-TRAP-MIB › hiQMgcpMtaTimeOutMsgTrap

hiQMgcpMtaTimeOutMsgTrap

OID (symbolic): US-HIQ-TRAP-MIB::hiQMgcpMtaTimeOutMsgTrap

OID (numeric): 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.3

Node type: NOTIFICATION-TYPE

Description: MGCP: This trap indicates that the NCS Media Gateway endpoint does not respond to the following message from hiQ 8000, namely, the timer has expired:

msg msgType ********************************************** CreateConnection CRCX

ModifyConnection MDCX

DeleteConnection DLCX

NotificationRequest RQNT

AuditEndpoint AUEP **********************************************

rtpEvtShortText will be as follows:

msgType TransactionID EndPointID@Hostname Protocol

where:

msgType as in the above table

TransactionID 0..999,999,999

EndPointID(Id for Line/DS0) aaln/1, aaln/2, aaln/3, aaln/4

Hostname FQDN

Protocol MGCP 1.0 NCS 1.0

For example: CRCX 18 aaln/1@motomta101.ipfonix.com MGCP 1.0 NCS 1.0

This trap is informational. There is no corresponding trap for its abatement(clear).

To avoid flooding the element manager system, this trap will be suppressed if the same msgType is received from the same hostname twice in a pre-determined suppresion interval of 15 seconds.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' US-HIQ-TRAP-MIB::hiQMgcpMtaTimeOutMsgTrap
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.3

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:55807->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (97607679) 11 days, 7:07:56.79
  SNMPv2-MIB::snmpTrapOID.0 = OID: US-HIQ-TRAP-MIB::hiQMgcpMtaTimeOutMsgTrap

Start monitoring Siemens Enterprise Communications Surpass hiQ softswitch platforms (SS7/SCTP signaling-link and disk-space notification status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the US-HIQ-TRAP-MIB::hiQMgcpMtaTimeOutMsgTrap OID value, configure state conditions and alerts, and monitor any Siemens Enterprise Communications Surpass hiQ softswitch platforms (SS7/SCTP signaling-link and disk-space notification status) from a single console.

OID Breakdown

Upper-level ancestors (13 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.4329	siemens	FSC-RTP-MIB
1.3.6.1.4.1.4329.2	iandcAdmin	FSC-RTP-MIB
1.3.6.1.4.1.4329.2.18	surpass	SURPASS-RTP-MIB
1.3.6.1.4.1.4329.2.18.2	surpassRtp	SURPASS-RTP-MIB
1.3.6.1.4.1.4329.2.18.2.2	surpassRtpAdmin	SURPASS-RTP-ADMIN-MIB
1.3.6.1.4.1.4329.2.18.2.2.1	hiq8000Admin	HIQ-ADMIN-MIB
1.3.6.1.4.1.4329.2.18.2.2.1.47	hiqTraps	HIQ-ADMIN-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.4329.2.18.2.2.1.47.178	hiQMgcpFaultMgmt	US-HIQ-TRAP-MIB
1.3.6.1.4.1.4329.2.18.2.2.1.47.178.3	hiQMgcpMtaTimeOutMsgTrap	US-HIQ-TRAP-MIB

US-HIQ-TRAP-MIB :: hiQMgcpMtaTimeOutMsgTrap

hiQMgcpMtaTimeOutMsgTrap

Module

This MIB depends on