All MIBs › UBIQUOSS-10GEPON-SERVICE-POLICY-GROUP-MIB
Organization: Ubiquoss Inc.
Last Updated: 2016-01-07
Description: Service policy configuration for Ubiquoss 10G EPON OLT equipment, mapping traffic policies to PON and subscriber ports
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is UBIQUOSS-10GEPON-SERVICE-POLICY-GROUP-MIB?
UBIQUOSS-10GEPON-SERVICE-POLICY-GROUP-MIB is a Ubiquoss Inc. enterprise MIB that defines service-policy mapping for 10G EPON (Ethernet Passive Optical Network) OLT equipment, registered under the ubi10GEponGroupMIB subtree. It exposes olt10gServicePolicyTable (indexed by uniPortIndex) associating an OLT uplink port with a named service map via olt10gServicePolicyServiceMapName, and onu10gServicePolicyTable (indexed by ubiPortIndex and onu10gId) that assigns per-ONU SLA, bridge, and multicast policy map names — onu10gServicePolicySlaMapName, onu10gServicePolicyBridgeMapName, and onu10gServicePolicyMcastMapName — for each subscriber's optical network unit. A default10gServicePolicy group provides fallback SLA/bridge/multicast map names, including separate defaults for hybrid PON deployments. As a configuration-mapping MIB rather than a counters MIB, monitoring it reveals which traffic-shaping and multicast policies are currently bound to each PON port and ONU, useful for confirming subscriber service provisioning matches intent. It depends on ENTITY-MIB (entPhysicalIndex), RFC1213-MIB (ifIndex), and Ubiquoss's own UBQS-SMI/UBQS-INTERFACE-MIB for port indexing, and is deployed on Ubiquoss 10G EPON OLT platforms in FTTH access networks. Field technicians provisioning these OLTs frequently need a UBIQUOSS-10GEPON-SERVICE-POLICY-GROUP-MIB MIB Browser to verify per-ONU policy-map assignments.
IPNetwork Monitor allows you to monitor SNMP objects defined in UBIQUOSS-10GEPON-SERVICE-POLICY-GROUP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Ubiquoss 10G EPON OLT platforms
Monitoring Examples
An operator polls onu10gServicePolicyTable (indexed by ubiPortIndex and onu10gId) to confirm onu10gServicePolicySlaMapName and onu10gServicePolicyBridgeMapName match the subscriber's intended service tier; an entry still showing the default10gServicePolicySlaMapName instead of the expected custom SLA map would indicate the ONU's service policy was never provisioned after activation.
What Can Be Monitored
- OLT port-to-service-map bindings
- per-ONU SLA/bridge/multicast policy map assignments
- default and hybrid-PON fallback policy maps
- PON/subscriber port indexing
Imported Objects
From ENTITY-MIB
| entPhysicalIndex | OBJECT-TYPE |
From RFC1213-MIB
| ifIndex |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString |
From UBQS-INTERFACE-MIB
| ubiPortIndex |
From UBQS-SMI
| ubi10GEponGroupMIB | OBJECT-IDENTITY |
OIDs
RFC description
Service policy configuration and management for Ubiquoss 10G EPON systems.
Start monitoring Ubiquoss 10G EPON OLT platforms (per-ONU SLA/bridge/multicast policy-map assignment status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.