UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB

All MIBs › UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB

Organization: Ubiquoss Inc.

Last Updated: 2016-01-07

Description: MIB for 10G EPON PON MAC-layer tables covering ONU registration, MAC addresses, and classifier rules on Ubiquoss OLT equipment

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB?

UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB is a proprietary MIB from Ubiquoss covering the MAC-layer information for 10 Gigabit Ethernet Passive Optical Network (10G-EPON) systems, used on their OLT (Optical Line Terminal) equipment. It is expected to expose data related to ONU (Optical Network Unit/subscriber terminal) registration status, learned MAC addresses per PON port, and classifier/filtering rules applied at the MAC layer, based on its short description. This positions it as an operational-status MIB for access-network hardware: monitoring ONU registration state reveals whether subscriber terminals are properly joined to the PON, and MAC address table data helps diagnose connectivity or forwarding issues at the access layer. No module description text or sample objects were available in the source to confirm exact table names, so this remains a general characterization based on the MIB's stated scope. It would be deployed in FTTH/FTTB access networks where Ubiquoss OLTs aggregate multiple ONUs over shared PON fiber using the 10G-EPON standard (IEEE 802.3av). Engineers can download the UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquoss 10G-EPON OLT (Optical Line Terminal)

Monitoring Examples

No sample objects were captured for this module, so specific table names cannot be cited; typically an operator managing a 10G-EPON OLT would check per-PON-port ONU registration/MAC entries to confirm subscriber terminals remain registered, investigating a missing or repeatedly deregistering ONU MAC entry as a sign of an optical link or ONU hardware fault, but this could not be confirmed from the available data.

What Can Be Monitored

ONU registration status (unconfirmed, no sample objects available)
PON port MAC address table (unconfirmed)

Imported Objects

From IF-MIB

InterfaceIndex

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus

From UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB

onuClassRuleId	OBJECT-TYPE
onuPortFilterRuleIngressPort	OBJECT-TYPE

From UBIQUOSS-EPON-TC-MIB

OnuType

From UBQS-INTERFACE-MIB

ubiPortIndex

From UBQS-SMI

ubi10GEponGroupMIB

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
ubi10gPonMacMIB	1.3.6.1.4.1.7800.2.510.1			This MIB module defines 10g epon mac information
ubi10gPonMacMIBObjects	1.3.6.1.4.1.7800.2.510.1.1
olt10gPonMacTable	1.3.6.1.4.1.7800.2.510.1.1.1		not-accessible	Description.
olt10gPonMacEntry	1.3.6.1.4.1.7800.2.510.1.1.1.1		not-accessible	Description.
MAC olt10gPonMacAddress	1.3.6.1.4.1.7800.2.510.1.1.1.1.1	MacAddress	read-only	Description.
INT olt10gPonMacAdminStatus	1.3.6.1.4.1.7800.2.510.1.1.1.1.2	INTEGER	read-write	Description.
INT olt10gPonMacOperStatus	1.3.6.1.4.1.7800.2.510.1.1.1.1.3	INTEGER	read-only	Description.
INT olt10gPonMacMode	1.3.6.1.4.1.7800.2.510.1.1.1.1.4	INTEGER	read-write	Description.
I32 registeredOntCount	1.3.6.1.4.1.7800.2.510.1.1.1.1.5	Integer32	read-only	Description.
onu10gPonMacTable	1.3.6.1.4.1.7800.2.510.1.1.2		not-accessible	Description.
onu10gPonMacEntry	1.3.6.1.4.1.7800.2.510.1.1.2.1		not-accessible	Description.
I32 onu10gId	1.3.6.1.4.1.7800.2.510.1.1.2.1.1	Integer32	read-only	Description.
MAC onu10gPonMacAddress	1.3.6.1.4.1.7800.2.510.1.1.2.1.2	MacAddress	read-write	Description.
STR onu10gPonMacOnuType	1.3.6.1.4.1.7800.2.510.1.1.2.1.3	DisplayString	read-create	Description.
INT onu10gPonMacAdminStatus	1.3.6.1.4.1.7800.2.510.1.1.2.1.4	INTEGER	read-write	Description.
INT onu10gPonMacOperStatus	1.3.6.1.4.1.7800.2.510.1.1.2.1.5	INTEGER	read-only	Description.
STR onu10gPonMacLoc	1.3.6.1.4.1.7800.2.510.1.1.2.1.6	DisplayString	read-write	Description.
ROW onu10gPonMacRowStatus	1.3.6.1.4.1.7800.2.510.1.1.2.1.7	RowStatus	read-create	Description.
I32 onu10gPonMacDistance	1.3.6.1.4.1.7800.2.510.1.1.2.1.8	Integer32	read-only	Unit : meter
INT onu10gPonLoopStatus	1.3.6.1.4.1.7800.2.510.1.1.2.1.9	INTEGER	read-only	Display ONU Loop Status
INT onu10gPonAutoRemoveStatus	1.3.6.1.4.1.7800.2.510.1.1.2.1.10	INTEGER	read-write	disable: onu-auto-remove, enable: no onu-auto-remove
INT onu10gPonSpeedSelect	1.3.6.1.4.1.7800.2.510.1.1.2.1.11	INTEGER	read-only	Display ONU's Supported Bandwidth Downstream Speed/Upstream Speed
INT onu10gPonReportMode	1.3.6.1.4.1.7800.2.510.1.1.2.1.12	INTEGER	read-only	Display ONU Link-up SIEPON Package SIEPON-A : DPoE SIEPON-B : Broadcom SIEPON-C : CTC
pon10gRemoteLoopBack	1.3.6.1.4.1.7800.2.510.1.1.3
pon10gLpbkTestTable	1.3.6.1.4.1.7800.2.510.1.1.3.1		not-accessible	10G Loopback Test Command. Each object setting is impossible. Multiple setting is only available.
pon10gLpbkTestEntry	1.3.6.1.4.1.7800.2.510.1.1.3.1.1		not-accessible	Description
I32 linkId	1.3.6.1.4.1.7800.2.510.1.1.3.1.1.1	Integer32	read-only	Description.
I32 pon10gLpbkTestFramesNum	1.3.6.1.4.1.7800.2.510.1.1.3.1.1.2	Integer32	read-write	Nember of frames. Units : Frames
I32 pon10gLpbkTestPayloadLength	1.3.6.1.4.1.7800.2.510.1.1.3.1.1.3	Integer32	read-write	Payload length. Units : Bytes
INT pon10gLpbkTestPayloadType	1.3.6.1.4.1.7800.2.510.1.1.3.1.1.4	INTEGER	read-write	Payload Type.
I32 pon10gLpbkTestVlanTag	1.3.6.1.4.1.7800.2.510.1.1.3.1.1.5	Integer32	read-write	VLAN Tag. Untagged frames : 0 Valid tags : 1~4094
ROW pon10gLpbkTestRowStatus	1.3.6.1.4.1.7800.2.510.1.1.3.1.1.6	RowStatus	read-create	RowStatus
pon10gLpbkTestResultTable	1.3.6.1.4.1.7800.2.510.1.1.3.3
I32 pon10gLpbkResultOltPortIndex	1.3.6.1.4.1.7800.2.510.1.1.3.3.1	Integer32	read-only	Description.
I32 pon10gLpbkResultOnuId	1.3.6.1.4.1.7800.2.510.1.1.3.3.2	Integer32	read-only	Description.
I32 pon10gLpbkResultLinkId	1.3.6.1.4.1.7800.2.510.1.1.3.3.3	Integer32	read-only	Description.
I32 pon10gLpbkResultFrameSent	1.3.6.1.4.1.7800.2.510.1.1.3.3.4	Integer32	read-only	Description.
INT pon10gLpbkResultPayloadType	1.3.6.1.4.1.7800.2.510.1.1.3.3.5	INTEGER	read-only	Description.
I32 pon10gLpbkResultFramesRecievedOK	1.3.6.1.4.1.7800.2.510.1.1.3.3.6	Integer32	read-only	Description.
I32 pon10gLpbkResultFramesRecievedBad	1.3.6.1.4.1.7800.2.510.1.1.3.3.7	Integer32	read-only	Description.
I32 pon10gLpbkResultMinDelay	1.3.6.1.4.1.7800.2.510.1.1.3.3.8	Integer32	read-only	Description.
I32 pon10gLpbkResultMaxDelay	1.3.6.1.4.1.7800.2.510.1.1.3.3.9	Integer32	read-only	Description.
I32 pon10gLpbkResultAverageDelay	1.3.6.1.4.1.7800.2.510.1.1.3.3.10	Integer32	read-only	Description.
pon10gMpcp	1.3.6.1.4.1.7800.2.510.1.1.4
dot3MpcpStatTable	1.3.6.1.4.1.7800.2.510.1.1.4.1		not-accessible	Description.
dot3MpcpStatEntry	1.3.6.1.4.1.7800.2.510.1.1.4.1.1		not-accessible	Description.
I32 mpcpLmhzd	1.3.6.1.4.1.7800.2.510.1.1.4.1.1.1	Integer32	read-only	Description.
C32 dot3MpcpDiscoveryWindowsSent	1.3.6.1.4.1.7800.2.510.1.1.4.1.1.4	Counter32	read-only	Description.
C32 dot3MpcpDiscoveryTimeout	1.3.6.1.4.1.7800.2.510.1.1.4.1.1.5	Counter32	read-only	Description.
C32 dot3MpcpRxRegRequest	1.3.6.1.4.1.7800.2.510.1.1.4.1.1.7	Counter32	read-only	Description.
C32 dot3MpcpRxRegAck	1.3.6.1.4.1.7800.2.510.1.1.4.1.1.9	Counter32	read-only	Description.
C32 dot3MpcpRxReport	1.3.6.1.4.1.7800.2.510.1.1.4.1.1.11	Counter32	read-only	Description.
C32 dot3MpcpTxGate	1.3.6.1.4.1.7800.2.510.1.1.4.1.1.12	Counter32	read-only	Description.
onu10gAdvancedRuleTable	1.3.6.1.4.1.7800.2.510.1.1.10		not-accessible	Description.
onu10gAdvancedRuleEntry	1.3.6.1.4.1.7800.2.510.1.1.10.1		not-accessible	Description.
STR onu10gAdvancedRuleClassMapName	1.3.6.1.4.1.7800.2.510.1.1.10.1.1	DisplayString	read-create	Description.
I32 onu10gAdvancedRulePrecedence	1.3.6.1.4.1.7800.2.510.1.1.10.1.2	Integer32	read-create	value must be even number
INT onu10gAdvancedRuleAction	1.3.6.1.4.1.7800.2.510.1.1.10.1.3	INTEGER	read-create	Description.
I32 onu10gAdvancedRuleSetVidActionParam	1.3.6.1.4.1.7800.2.510.1.1.10.1.4	Integer32	read-create	if ruleAction is setVidAndAddTag(5), replaceTagAndSetVid(8), vidActionParam has value between 1 and 4094 else vidActionParam has 65535
I32 onu10gAdvancedRuleSetCosActionParam	1.3.6.1.4.1.7800.2.510.1.1.10.1.5	Integer32	read-create	if ruleAction is setCos(6), cosActionParam has value between 0 and 7 else cosActionParam has 65535
I32 onu10gAdvancedRuleSetDstActionParamPort	1.3.6.1.4.1.7800.2.510.1.1.10.1.6	Integer32	read-create	if ruleAction is setDstAndFwd(18), dstActionParam has value between 1 and 4 else dstActionParam has 65535
I32 onu10gAdvancedRuleSetDstActionParamQueue	1.3.6.1.4.1.7800.2.510.1.1.10.1.7	Integer32	read-create	if ruleAction is setDstAndFwd(18), dstActionParam has value between 0 and 10 else dstActionParam has 65535
ROW onu10gAdvancedRuleRowStatus	1.3.6.1.4.1.7800.2.510.1.1.10.1.8	RowStatus	read-create	Description.
unAdmin10gOnuTable	1.3.6.1.4.1.7800.2.510.1.1.11		not-accessible	Description.
unAdmin10gOnuEntry	1.3.6.1.4.1.7800.2.510.1.1.11.1		not-accessible	Description.
INT unAdmin10gOnuId	1.3.6.1.4.1.7800.2.510.1.1.11.1.1	INTEGER	not-accessible	Description.
MAC unAdmin10gOnuPonMacAddress	1.3.6.1.4.1.7800.2.510.1.1.11.1.2	MacAddress	read-only	Description.
STR unAdmin10gOnuVendorSpecificInfo	1.3.6.1.4.1.7800.2.510.1.1.11.1.3	DisplayString	read-only	Description.
clearUnAdmin10gOnu	1.3.6.1.4.1.7800.2.510.1.1.12
NUM clearUnAdmin10gOnuOltPort	1.3.6.1.4.1.7800.2.510.1.1.12.1	InterfaceIndex	read-write	Description.
MAC clearUnAdmin10gOnuMacAddress	1.3.6.1.4.1.7800.2.510.1.1.12.2	MacAddress	read-write
onu10gSubscriberMacTable	1.3.6.1.4.1.7800.2.510.1.1.13		not-accessible	Description.
onu10gSubscriberMacEntry	1.3.6.1.4.1.7800.2.510.1.1.13.1		not-accessible	Description.
I32 onu10gSubscriberMacId	1.3.6.1.4.1.7800.2.510.1.1.13.1.1	Integer32	not-accessible	Description.
MAC onu10gSubscriberMacAddress	1.3.6.1.4.1.7800.2.510.1.1.13.1.2	MacAddress	read-only	Description.
INT onu10gRegMode	1.3.6.1.4.1.7800.2.510.1.1.14	INTEGER	read-write	Description.
onu10gBandWidthTable	1.3.6.1.4.1.7800.2.510.1.1.16		not-accessible	Description.
onu10gBandWidthEntry	1.3.6.1.4.1.7800.2.510.1.1.16.1		not-accessible	Description.
I32 onu10gDownStreamMin	1.3.6.1.4.1.7800.2.510.1.1.16.1.1	Integer32	read-only	Description.
I32 onu10gDownStreamMax	1.3.6.1.4.1.7800.2.510.1.1.16.1.2	Integer32	read-only	Description.
I32 onu10gUpStreamMin	1.3.6.1.4.1.7800.2.510.1.1.16.1.3	Integer32	read-only	Description.
I32 onu10gUpStreamMax	1.3.6.1.4.1.7800.2.510.1.1.16.1.4	Integer32	read-only	Description.
I32 onu10gAutoRemoveTimer	1.3.6.1.4.1.7800.2.510.1.1.17	Integer32	read-write	ONU auto remove timer. (unit : day) 0 : clear 1-100 : auto remove timer range
olt10gPrevBridgeTable	1.3.6.1.4.1.7800.2.510.1.1.20		not-accessible	Description.
olt10gPrevBridgeEntry	1.3.6.1.4.1.7800.2.510.1.1.20.1		not-accessible	Description.
OCT prevMacAddress	1.3.6.1.4.1.7800.2.510.1.1.20.1.1	OCTET STRING	read-only	Description.
I32 prevMacAddressSize	1.3.6.1.4.1.7800.2.510.1.1.20.1.2	Integer32	read-only	Description.
get10gOntIndexFromMacAddr	1.3.6.1.4.1.7800.2.510.1.1.21
MAC req10gOntMacAddress	1.3.6.1.4.1.7800.2.510.1.1.21.1	MacAddress	read-write	Description.
I32 resp10gOltIfIndex	1.3.6.1.4.1.7800.2.510.1.1.21.2	Integer32	read-only	Description.
I32 resp10gOnuId	1.3.6.1.4.1.7800.2.510.1.1.21.3	Integer32	read-only	Description.
OCT resp10gOnuIfName	1.3.6.1.4.1.7800.2.510.1.1.21.4	OCTET STRING	read-only	Description.
STR resp10gOnuType	1.3.6.1.4.1.7800.2.510.1.1.21.5	DisplayString	read-only	Description.
INT resp10gOnuAdminStatus	1.3.6.1.4.1.7800.2.510.1.1.21.6	INTEGER	read-only	Description.
INT resp10gOnuOperStatus	1.3.6.1.4.1.7800.2.510.1.1.21.7	INTEGER	read-only	Description.
INT pon10gBranchStatus	1.3.6.1.4.1.7800.2.510.1.1.22	INTEGER	read-write	Description.
onu10gDdmi	1.3.6.1.4.1.7800.2.510.1.1.23
onu10gDdmiTable	1.3.6.1.4.1.7800.2.510.1.1.23.1		not-accessible	10g ONU DDM Information Table
onu10gDdmiEntry	1.3.6.1.4.1.7800.2.510.1.1.23.1.1		not-accessible	10g ONU DDM Information Table Entry
STR rx10gLaserPower	1.3.6.1.4.1.7800.2.510.1.1.23.1.1.1	DisplayString	read-only	RX Laser Power
STR tx10gLaserPower	1.3.6.1.4.1.7800.2.510.1.1.23.1.1.2	DisplayString	read-only	TX Laser Power
STR tx10gLaserVcc	1.3.6.1.4.1.7800.2.510.1.1.23.1.1.3	DisplayString	read-only	TX Laser Vcc
STR tx10gLaserBias	1.3.6.1.4.1.7800.2.510.1.1.23.1.1.4	DisplayString	read-only	TX Laser Bias(not supported)
STR tx10gTemperature	1.3.6.1.4.1.7800.2.510.1.1.23.1.1.5	DisplayString	read-only	TX Temperature
STR rx10gLaserPowerLowThreshold	1.3.6.1.4.1.7800.2.510.1.1.23.2	DisplayString	read-write	RX Laser Power Low Limit(-32~-20)
STR rx10gLaserPowerHighThreshold	1.3.6.1.4.1.7800.2.510.1.1.23.3	DisplayString	read-write	RX Laser Power High Limit(-10~1)
STR tx10gLaserPowerLowThreshold	1.3.6.1.4.1.7800.2.510.1.1.23.4	DisplayString	read-write	TX Laser Power Low Limit(-7~0)
STR tx10gLaserPowerHighThreshold	1.3.6.1.4.1.7800.2.510.1.1.23.5	DisplayString	read-write	TX Laser Power High Limit(1~9)
STR tx10gLaserVccLowThreshold	1.3.6.1.4.1.7800.2.510.1.1.23.6	DisplayString	read-write	TX Laser Vcc Low Limit(2.7~3.2)
STR tx10gLaserVccHighThreshold	1.3.6.1.4.1.7800.2.510.1.1.23.7	DisplayString	read-write	TX Laser Vcc High Limit(3.3~3.8)
STR tx10gLaserBiasLowThreshold	1.3.6.1.4.1.7800.2.510.1.1.23.8	DisplayString	read-write	TX Laser Bias Low Limit(Not Supported)
STR tx10gLaserBiasHighThreshold	1.3.6.1.4.1.7800.2.510.1.1.23.9	DisplayString	read-write	TX Laser Bias High Limit(Not Supported)
STR tx10gTemperatureLowThreshold	1.3.6.1.4.1.7800.2.510.1.1.23.10	DisplayString	read-write	TX Temperature Low Limit(0~40)
STR tx10gTemperatureHighThreshold	1.3.6.1.4.1.7800.2.510.1.1.23.11	DisplayString	read-write	TX Temperature High Limit (50~90)
onu10gInfoFromSubscriberTable	1.3.6.1.4.1.7800.2.510.1.1.24		not-accessible	Description.
onu10gInfoFromSubscriberEntry	1.3.6.1.4.1.7800.2.510.1.1.24.1		not-accessible	Description.
I32 onu10gInfoFromSubscriberOltIfIndex	1.3.6.1.4.1.7800.2.510.1.1.24.1.2	Integer32	read-only	Description.
I32 onu10gInfoFromSubscriberOnuId	1.3.6.1.4.1.7800.2.510.1.1.24.1.3	Integer32	read-only	Get ONU ID From Subscriber MAC Address (OLT Dynamic Bridging-entries)
OCT onu10gInfoFromSubscriberOnuIfName	1.3.6.1.4.1.7800.2.510.1.1.24.1.4	OCTET STRING	read-only	GET ONU Interface Name From Subscriber MAC Address (OLT Dynamic Bridging-entries)
MAC onu10gInfoFromSubscriberOnuMacAddress	1.3.6.1.4.1.7800.2.510.1.1.24.1.5	MacAddress	read-only	Get ONU MAC Address From Subscriber MAC Address (OLT Dynamic Bridging-entries)
STR onu10gInfoFromSubscriberOnuType	1.3.6.1.4.1.7800.2.510.1.1.24.1.6	DisplayString	read-only	Get ONU Type From Subscriber MAC Address (OLT Dynamic Bridging-entries)
INT onu10gInfoFromSubscriberAdminStatus	1.3.6.1.4.1.7800.2.510.1.1.24.1.7	INTEGER	read-only	Get ONU Admin Status From Subscriber MAC Address (OLT Dynamic Bridging-entries)
INT onu10gInfoFromSubscriberOperStatus	1.3.6.1.4.1.7800.2.510.1.1.24.1.8	INTEGER	read-only	Get ONU Oper Status From Subscriber MAC Address (OLT Dynamic Bridging-entries)
onu10gSubportIdFromSubscriberTable	1.3.6.1.4.1.7800.2.510.1.1.25		not-accessible	Description.
onu10gSubportIdFromSubscriberEntry	1.3.6.1.4.1.7800.2.510.1.1.25.1		not-accessible	Description.
I32 onu10gSubportId	1.3.6.1.4.1.7800.2.510.1.1.25.1.1	Integer32	read-only	Get ONU User Port ID From Subscriber MAC Address (ONU Dynamic Bridging-entries)
olt10gDynamicBridgeEntryTable	1.3.6.1.4.1.7800.2.510.1.1.26		not-accessible	Description.
olt10gDynamicBridgeEntry	1.3.6.1.4.1.7800.2.510.1.1.26.1		not-accessible	Description.
I32 olt10gDynamicMacId	1.3.6.1.4.1.7800.2.510.1.1.26.1.1	Integer32	not-accessible	Description.
MAC olt10gDynamicMacAddress	1.3.6.1.4.1.7800.2.510.1.1.26.1.2	MacAddress	read-only	Description.
onu10gPmapFilteringRuleTable	1.3.6.1.4.1.7800.2.510.1.1.27		not-accessible	Description.
onu10gPmapFilteringRuleEntry	1.3.6.1.4.1.7800.2.510.1.1.27.1		not-accessible	Description.
STR onu10gFilteringRulePolicyMapName	1.3.6.1.4.1.7800.2.510.1.1.27.1.1	DisplayString	read-create	Filter type policy-map name
I32 onu10gFilteringRuleVid	1.3.6.1.4.1.7800.2.510.1.1.27.1.2	Integer32	read-create	Rule subparam (VLAN ID)
I32 onu10gFilteringRuleVidForClause	1.3.6.1.4.1.7800.2.510.1.1.27.1.3	Integer32	read-create	Rule subparam (VLAN ID for Double-tag)
ROW onu10gFilteringRuleRowStatus	1.3.6.1.4.1.7800.2.510.1.1.27.1.4	RowStatus	read-create	Map Create operator (Create & Go)
I32 onu10gFilteringRuleUserPortId	1.3.6.1.4.1.7800.2.510.1.1.27.1.5	Integer32	read-create	Rule subparam (ONU User Port ID)
I32 onu10gFilteringRuleLinkId	1.3.6.1.4.1.7800.2.510.1.1.27.1.6	Integer32	read-create	Rule subparam (ONU Link ID)
olt10gDdmi	1.3.6.1.4.1.7800.2.510.1.1.28
I32 olt10gDdmiControlPort	1.3.6.1.4.1.7800.2.510.1.1.28.1	Integer32	read-write	RSSI Control PortIndex
I32 olt10gDdmiControlOnuId	1.3.6.1.4.1.7800.2.510.1.1.28.2	Integer32	read-write	RSSI Control onuId (1~64, 255:idle)
STR olt10gRxLaserPower	1.3.6.1.4.1.7800.2.510.1.1.28.3	DisplayString	read-only	OLT RX Laser Power
olt10gPonRedundancyInfoTable	1.3.6.1.4.1.7800.2.510.1.1.29		not-accessible	10g Olt Pon Redundancy Info
olt10gPonRedundancyEntry	1.3.6.1.4.1.7800.2.510.1.1.29.1		not-accessible	10g Olt Pon Redundancy Info Entry
I32 olt10gRedPortIndex	1.3.6.1.4.1.7800.2.510.1.1.29.1.1	Integer32	read-only	10g Olt Pon Redundancy PortIndex
I32 olt10gRedPeerPortIndex	1.3.6.1.4.1.7800.2.510.1.1.29.1.2	Integer32	read-only	10g Olt Pon Redundancy Peer PortIndex
INT olt10gRedActiveStatus	1.3.6.1.4.1.7800.2.510.1.1.29.1.3	INTEGER	read-only	10g Olt Pon Redundancy Active Status
INT olt10gRedLinkStatus	1.3.6.1.4.1.7800.2.510.1.1.29.1.4	INTEGER	read-only	10g Olt Pon Redundancy Link Status
onu10gTxPowerOff	1.3.6.1.4.1.7800.2.510.1.1.30
I32 txPowerOltPortId	1.3.6.1.4.1.7800.2.510.1.1.30.1	Integer32	read-write	TX-Power PortIndex
I32 txPowerOnuId	1.3.6.1.4.1.7800.2.510.1.1.30.2	Integer32	read-write	TX-Power OnuId
I32 txPowerTimeOut	1.3.6.1.4.1.7800.2.510.1.1.30.3	Integer32	read-write	TX-Power Timeout 0 : Clear (Tx-Power ON) 1~254 : Timeout 65535 : Endless Off
olt10gPortReset	1.3.6.1.4.1.7800.2.510.1.1.31
I32 olt10gPortId	1.3.6.1.4.1.7800.2.510.1.1.31.1	Integer32	read-write	Reset PortIndex
INT olt10gPortResetOp	1.3.6.1.4.1.7800.2.510.1.1.31.2	INTEGER	read-write	OLT Port Reset Operation
olt10gAdvancedRuleTable	1.3.6.1.4.1.7800.2.510.1.1.34		not-accessible	10g OLT Filtering Rule Table
olt10gAdvancedRuleEntry	1.3.6.1.4.1.7800.2.510.1.1.34.1		not-accessible	10g OLT Filtering Rule Entry
STR olt10gAdvancedRuleClassMapName	1.3.6.1.4.1.7800.2.510.1.1.34.1.1	DisplayString	read-create	10g OLT Filtering Rule Class Map
I32 olt10gAdvancedRulePrecedence	1.3.6.1.4.1.7800.2.510.1.1.34.1.2	Integer32	read-create	value must be even number
INT olt10gAdvancedRuleAction	1.3.6.1.4.1.7800.2.510.1.1.34.1.3	INTEGER	read-create	2 : add-cvlan-tag, 4 : del-tag, 6 : add-svlan-tag
I32 olt10gAdvancedRuleSetVidActionParam	1.3.6.1.4.1.7800.2.510.1.1.34.1.4	Integer32	read-create	if ruleAction is add-cvlan-tag, add-svlan-tag, del-tag, vidActionParam has value between 1 and 4094 else vidActionParam has 65535
I32 olt10gAdvancedRuleSetCosActionParam	1.3.6.1.4.1.7800.2.510.1.1.34.1.5	Integer32	read-create	no supported
I32 olt10gAdvancedRuleSetDstActionParamLink	1.3.6.1.4.1.7800.2.510.1.1.34.1.6	Integer32	read-create	no supported
I32 olt10gAdvancedRuleSetDstActionParamQueue	1.3.6.1.4.1.7800.2.510.1.1.34.1.7	Integer32	read-create	no supported
ROW olt10gAdvancedRuleRowStatus	1.3.6.1.4.1.7800.2.510.1.1.34.1.8	RowStatus	read-create	Row Status 4 : CreateAndGo, 6 : Destroy
olt10gPmapFilteringRuleTable	1.3.6.1.4.1.7800.2.510.1.1.35		not-accessible	OLT Policy-map Filtering Rule Table
olt10gPmapFilteringRuleEntry	1.3.6.1.4.1.7800.2.510.1.1.35.1		not-accessible	OLT Policy-map Filtering Rule Entry
STR olt10gFilteringRulePolicyMapName	1.3.6.1.4.1.7800.2.510.1.1.35.1.1	DisplayString	read-create	10g OLT Filtering Rule Policy-map Name
ROW olt10gFilteringRuleRowStatus	1.3.6.1.4.1.7800.2.510.1.1.35.1.2	RowStatus	read-create	Row Status 4 : CreateAndGo, 6 : Destroy
I32 onu10gUpCount	1.3.6.1.4.1.7800.2.510.1.1.37	Integer32	read-only	Number of up ONU(10G)

RFC description

Defines 10G EPON PON MAC information and management for Ubiquoss optical line terminal equipment.

Start monitoring Ubiquoss 10G-EPON OLT (Optical Line Terminal) (ONU registration/MAC-address-table status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB

What Is UBIQUOSS-10GEPON-PON-MAC-GROUP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description