All MIBs › TWTRAP-MIB
Category: Network Management and SNMP Infrastructure
Description:
Defines trap objects for TW network devices to report fault and status change notifications.
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| NetworkAddress | |
| TimeTicks | |
| internet | |
| mgmt |
From RFC1213-MIB
| DisplayString |
What Is TWTRAP-MIB?
TWTRAP-MIB is a vendor MIB that defines a set of SNMP trap/notification objects for a family of network devices ('TW'-branded) to report fault conditions and status changes. Rather than exposing pollable data tables, its content is a set of notification definitions, so its "data" category is fault/event reporting rather than performance counters or configuration state. Its monitoring value lies squarely in hardware/software status alerting: it lets a device push real-time notifications about faults or state transitions (e.g., a hardware failure or reboot) to a network management station instead of requiring polling. It is built on the standard SNMPv2 notification framework and the standard OID registration tree (mgmt, enterprises), rather than depending on other feature-specific MIBs. It is deployed on TW-branded network devices that send fault/status-change traps to a central network management system in enterprise monitoring setups. Engineers can download the TWTRAP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TWTRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- device fault trap notifications
- status change trap notifications
Supported Devices
- TW-branded network device (vendor unspecified)
Monitoring Examples
The sample objects available for this module (mgmt, directory, experimental, private, enterprises, mib-2) are standard SNMP OID-tree registration points rather than device-specific data objects, confirming this module is primarily a trap/notification-definition MIB. In practice, a network management station would register to receive its traps to be alerted in real time to a fault or status-change event, such as a device reboot or hardware failure, rather than polling for a value.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| directory | 1.3.6.1.1 | |||
| mgmt | 1.3.6.1.2 | |||
| mib_2 | 1.3.6.1.2.1 | |||
| dot1dBridge | 1.3.6.1.2.1.17 | |||
| NTF newRoot | 1.3.6.1.2.1.17.0.1 | Become the new root of the Spanning Tree. | ||
| NTF topologyChange | 1.3.6.1.2.1.17.0.2 | Spanning tree topology change. | ||
| dot1dBase | 1.3.6.1.2.1.17.1 | |||
| dot1dStp | 1.3.6.1.2.1.17.2 | |||
| dot1dStpPortTable | 1.3.6.1.2.1.17.2.15 | |||
| dot1dStpPortEntry | 1.3.6.1.2.1.17.2.15.1 | |||
| dot1dStpPort | 1.3.6.1.2.1.17.2.15.1.1 | |||
| dot1dSr | 1.3.6.1.2.1.17.3 | |||
| dot1dTp | 1.3.6.1.2.1.17.4 | |||
| dot1dStatic | 1.3.6.1.2.1.17.5 | |||
| snmpDot3RptrMgt | 1.3.6.1.2.1.22 | |||
| rptrBasicPackage | 1.3.6.1.2.1.22.1 | |||
| rptrRptrInfo | 1.3.6.1.2.1.22.1.1 | |||
| rptrGroupInfo | 1.3.6.1.2.1.22.1.2 | |||
| rptrPortInfo | 1.3.6.1.2.1.22.1.3 | |||
| rptrPortTable | 1.3.6.1.2.1.22.1.3.1 | |||
| rptrPortEntry | 1.3.6.1.2.1.22.1.3.1.1 | |||
| rptrPortGroupIndex | 1.3.6.1.2.1.22.1.3.1.1.1 | |||
| rptrPortIndex | 1.3.6.1.2.1.22.1.3.1.1.2 | |||
| rptrMonitorPackage | 1.3.6.1.2.1.22.2 | |||
| rptrMonitorRptrInfo | 1.3.6.1.2.1.22.2.1 | |||
| rptrMonitorGroupInfo | 1.3.6.1.2.1.22.2.2 | |||
| rptrMonitorPortInfo | 1.3.6.1.2.1.22.2.3 | |||
| rptrAddrTrackPackage | 1.3.6.1.2.1.22.3 | |||
| rptrAddrTrackRptrInfo | 1.3.6.1.2.1.22.3.1 | |||
| rptrAddrTrackGroupInfo | 1.3.6.1.2.1.22.3.2 | |||
| rptrAddrTrackPortInfo | 1.3.6.1.2.1.22.3.3 | |||
| experimental | 1.3.6.1.3 | |||
| private | 1.3.6.1.4 | |||
| enterprises | 1.3.6.1.4.1 | |||
| npi | 1.3.6.1.4.1.1101 | |||
| common | 1.3.6.1.4.1.1101.1 | |||
| devDeviceInfo | 1.3.6.1.4.1.1101.1.1 | |||
| devMonitorInfo | 1.3.6.1.4.1.1101.1.2 | |||
| devMonTrapReportLevel | 1.3.6.1.4.1.1101.1.2.2 | |||
| devActionInfo | 1.3.6.1.4.1.1101.1.3 | |||
| npi_Switching_MIB | 1.3.6.1.4.1.1101.2 | |||
| switch_Common_MIB | 1.3.6.1.4.1.1101.2.1 | |||
| switchBasicHubInfo | 1.3.6.1.4.1.1101.2.1.1 | |||
| basicSwitchPowerState | 1.3.6.1.4.1.1101.2.1.1.14 | |||
| switchBasicPortInfo | 1.3.6.1.4.1.1101.2.1.2 | |||
| switchPortTable | 1.3.6.1.4.1.1101.2.1.2.1 | |||
| switchPortEntry | 1.3.6.1.4.1.1101.2.1.2.1.1 | |||
| switchPortIndex | 1.3.6.1.4.1.1101.2.1.2.1.1.1 | |||
| switchPortFullDuplex | 1.3.6.1.4.1.1101.2.1.2.1.1.6 | |||
| switchPortFlowControl | 1.3.6.1.4.1.1101.2.1.2.1.1.7 | |||
| switchPortSpeed | 1.3.6.1.4.1.1101.2.1.2.1.1.13 | |||
| switchAddrTrackInfo | 1.3.6.1.4.1.1101.2.1.3 | |||
| switchAddrPortInfo | 1.3.6.1.4.1.1101.2.1.3.1 | |||
| switchAddrPortTable | 1.3.6.1.4.1.1101.2.1.3.1.1 | |||
| switchAddrPortEntry | 1.3.6.1.4.1.1101.2.1.3.1.1.1 | |||
| switchAddrPortIndex | 1.3.6.1.4.1.1101.2.1.3.1.1.1.1 | |||
| switchAddrPortPackMaxCount | 1.3.6.1.4.1.1101.2.1.3.1.1.1.6 | |||
| switchAddrStaticInfo | 1.3.6.1.4.1.1101.2.1.4 | |||
| switchAddrStaticPackMaxCount | 1.3.6.1.4.1.1101.2.1.4.4 | |||
| switchAddrStaticTable | 1.3.6.1.4.1.1101.2.1.4.6 | |||
| switchAddrStaticEntry | 1.3.6.1.4.1.1101.2.1.4.6.1 | |||
| switchAddrStaticIndex | 1.3.6.1.4.1.1101.2.1.4.6.1.1 | |||
| switchAddrStaticSetAddress | 1.3.6.1.4.1.1101.2.1.4.6.1.2 | |||
| switchThresholdInfo | 1.3.6.1.4.1.1101.2.1.5 | |||
| basicThresholdTable | 1.3.6.1.4.1.1101.2.1.5.4 | |||
| basicThresholdTableEntry | 1.3.6.1.4.1.1101.2.1.5.4.1 | |||
| switchThresholdUnit | 1.3.6.1.4.1.1101.2.1.5.4.1.4 | |||
| switchThresholdPort | 1.3.6.1.4.1.1101.2.1.5.4.1.5 | |||
| switchThresholdType | 1.3.6.1.4.1.1101.2.1.5.4.1.6 | |||
| switchThresholdCounter | 1.3.6.1.4.1.1101.2.1.5.4.1.9 | |||
| switchPowerLinkInfo | 1.3.6.1.4.1.1101.2.1.9 | |||
| switchPowerLinkOperationMode | 1.3.6.1.4.1.1101.2.1.9.2 | |||
| switchPowerLinkUserSettingInfo | 1.3.6.1.4.1.1101.2.1.9.5 | |||
| switchPowerLinkUserOperationMode | 1.3.6.1.4.1.1101.2.1.9.5.1 | |||
| switchPowerLinkUserRange | 1.3.6.1.4.1.1101.2.1.9.5.2 | |||
| switchPowerLinkStatus | 1.3.6.1.4.1.1101.2.1.9.7 | |||
| switch_Cascade_MIB | 1.3.6.1.4.1.1101.2.2 | |||
| switchCmsBasicPackage | 1.3.6.1.4.1.1101.2.2.1 | |||
| switchCmsBasicClusterInfo | 1.3.6.1.4.1.1101.2.2.1.1 | |||
| switchCmsBasicUnitInfo | 1.3.6.1.4.1.1101.2.2.1.2 | |||
| basicUnitTable | 1.3.6.1.4.1.1101.2.2.1.2.1 | |||
| basicUnitEntry | 1.3.6.1.4.1.1101.2.2.1.2.1.1 | |||
| basicUnitIndex | 1.3.6.1.4.1.1101.2.2.1.2.1.1.1 | |||
| switchCmsBasicPortInfo | 1.3.6.1.4.1.1101.2.2.1.3 | |||
| basicPortTable | 1.3.6.1.4.1.1101.2.2.1.3.1 | |||
| basicPortEntry | 1.3.6.1.4.1.1101.2.2.1.3.1.1 | |||
| basicPortUnitIndex | 1.3.6.1.4.1.1101.2.2.1.3.1.1.1 | |||
| basicPortIndex | 1.3.6.1.4.1.1101.2.2.1.3.1.1.2 | |||
| switchCmsAddrTrackPackage | 1.3.6.1.4.1.1101.2.2.3 | |||
| switchCmsAddrTrackPortInfo | 1.3.6.1.4.1.1101.2.2.3.3 | |||
| addrTrackPortTable | 1.3.6.1.4.1.1101.2.2.3.3.1 | |||
| addrTrackPortEntry | 1.3.6.1.4.1.1101.2.2.3.3.1.1 | |||
| addrTrackPortUnitIndex | 1.3.6.1.4.1.1101.2.2.3.3.1.1.1 | |||
| addrTrackPortPortIndex | 1.3.6.1.4.1.1101.2.2.3.3.1.1.2 | |||
| switch_FE1200 | 1.3.6.1.4.1.1101.2.3 | |||
| switch_TidalWave | 1.3.6.1.4.1.1101.2.10 | |||
| switch_FE1200PLUS | 1.3.6.1.4.1.1101.2.10.1 | |||
| NTF rptr_Reset | 1.3.6.1.4.1.1101.2.10.1.0.256 | Successfully reset the switching hub. | ||
| NTF rptr_FReset1 | 1.3.6.1.4.1.1101.2.10.1.0.257 | Fattory reset of the switching hub is successful. | ||
| NTF rptr_Port_Enabled | 1.3.6.1.4.1.1101.2.10.1.0.288 | Enable a port. | ||
| NTF rptr_Port_Disabled | 1.3.6.1.4.1.1101.2.10.1.0.289 | Disable a port. | ||
| NTF rptr_Port_Link_Up | 1.3.6.1.4.1.1101.2.10.1.0.292 | Link state of a port has been changed from down to up. | ||
| NTF rptr_Port_Link_Down | 1.3.6.1.4.1.1101.2.10.1.0.293 | Link state of a port has been changed from up to down. | ||
| NTF switch_Unit_Power_Status | 1.3.6.1.4.1.1101.2.10.1.0.512 | The power supply of the switching hub is changed. | ||
| NTF switch_Port_Monitor_Rx_CBPDU | 1.3.6.1.4.1.1101.2.10.1.0.514 | The monitoring port received a configuration BPDU. | ||
| NTF switch_Port_Duplex_Change | 1.3.6.1.4.1.1101.2.10.1.0.532 | Duplex status of the switching port is changed. | ||
| NTF switch_Port_Speed_Change | 1.3.6.1.4.1.1101.2.10.1.0.533 | Speed of the switching port is changed. | ||
| NTF switch_Port_FlowControl_Changed | 1.3.6.1.4.1.1101.2.10.1.0.534 | Flow Control status of the switching port is changed due to auto-negotiate full duplex. | ||
| NTF switch_Unit_Accumulate_reach | 1.3.6.1.4.1.1101.2.10.1.0.576 | |||
| NTF switch_Unit_Rate_notification | 1.3.6.1.4.1.1101.2.10.1.0.577 | |||
| NTF switch_Port_Accumulate_reach | 1.3.6.1.4.1.1101.2.10.1.0.579 | |||
| NTF switch_Port_Rate_notification | 1.3.6.1.4.1.1101.2.10.1.0.580 | |||
| NTF switch_Security_On | 1.3.6.1.4.1.1101.2.10.1.0.592 | Enable filter function. | ||
| NTF switch_Security_Off | 1.3.6.1.4.1.1101.2.10.1.0.593 | Disable filter function. | ||
| NTF switch_Security_Addr_Collision | 1.3.6.1.4.1.1101.2.10.1.0.595 | Set a collision address in filter table. | ||
| NTF switch_Security_Reserved_Addr_Collision | 1.3.6.1.4.1.1101.2.10.1.0.596 | Set an address collision with reserved address. | ||
| NTF switch_Port_Monitor_On | 1.3.6.1.4.1.1101.2.10.1.0.608 | Enable port monitor function. | ||
| NTF switch_Port_Monitor_Off | 1.3.6.1.4.1.1101.2.10.1.0.609 | Disable port monitor function. | ||
| NTF switch_Port_Monitor_Port_On | 1.3.6.1.4.1.1101.2.10.1.0.610 | Port monitor function is active on the specific port. | ||
| NTF switch_Port_Monitor_Port_Off | 1.3.6.1.4.1.1101.2.10.1.0.611 | Port monitor function is removed from the specific port. | ||
| NTF switch_Port_Monitor_Active | 1.3.6.1.4.1.1101.2.10.1.0.612 | Enable port monitor function of a monitor group. | ||
| NTF switch_Port_Monitor_Removed | 1.3.6.1.4.1.1101.2.10.1.0.613 | Disable port monitor function of a monitor group. | ||
| NTF switch_Port_Monitor_Error | 1.3.6.1.4.1.1101.2.10.1.0.614 | Operation error for port monitor function. | ||
| NTF switch_Virtual_LAN_On | 1.3.6.1.4.1.1101.2.10.1.0.624 | Enable Virtual LAN function. | ||
| NTF switch_Virtual_LAN_Off | 1.3.6.1.4.1.1101.2.10.1.0.625 | Disable Virtual LAN function. | ||
| NTF switch_VL_Port_On | 1.3.6.1.4.1.1101.2.10.1.0.626 | Virtual LAN function is active on the specific port. | ||
| NTF switch_VL_Port_Off | 1.3.6.1.4.1.1101.2.10.1.0.627 | Virtual LAN function is removed from the specific port. | ||
| switch_DS24 | 1.3.6.1.4.1.1101.2.13 | |||
| switchSecureAddrInfo | 1.3.6.1.4.1.1101.2.13.6 | |||
| switchAddrSecureTable | 1.3.6.1.4.1.1101.2.13.6.4 | |||
| switchAddrSecureEntry | 1.3.6.1.4.1.1101.2.13.6.4.1 | |||
| switchAddrSecurePortIndex | 1.3.6.1.4.1.1101.2.13.6.4.1.1 | |||
| switchAddrSecureIndex | 1.3.6.1.4.1.1101.2.13.6.4.1.2 | |||
| switchAddrSecureAddress | 1.3.6.1.4.1.1101.2.13.6.4.1.3 | |||
| switchPortMonitorInfo | 1.3.6.1.4.1.1101.2.13.7 | |||
| switchPortMonitorTable | 1.3.6.1.4.1.1101.2.13.7.4 | |||
| switchPortMonitorEntry | 1.3.6.1.4.1.1101.2.13.7.4.1 | |||
| switchPortMonitorIndex | 1.3.6.1.4.1.1101.2.13.7.4.1.1 | |||
| switchPortMonitorMessageStatus | 1.3.6.1.4.1.1101.2.13.7.4.1.3 | |||
| switchVirtualLanInfo | 1.3.6.1.4.1.1101.2.13.8 | |||
| switchVirtualLanMessage | 1.3.6.1.4.1.1101.2.13.8.5 | |||
| switchTrapInfo | 1.3.6.1.4.1.1101.2.13.13 | |||
| switchTrapStaticCollisionAddress | 1.3.6.1.4.1.1101.2.13.13.1 | |||
| switchTrapStaticCollisionAddress2 | 1.3.6.1.4.1.1101.2.13.13.2 | |||
| switchTrapFilterCollisionAddress | 1.3.6.1.4.1.1101.2.13.13.3 |
RFC description
Trap definitions for Network Peripherals TidalWave FE-1200 series switch devices.
Start monitoring TW-branded network device, vendor unspecified (fault/state-transition notification status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.