TPT-TPA-HARDWARE-MIB

All MIBs › TPT-TPA-HARDWARE-MIB

Organization: Trend Micro, Inc.

Last Updated: 2016-05-25

Category: Firewall and Intrusion Prevention, Hardware and Power Management

Description: Manages TippingPoint TPA appliance hardware inventory, component status, and environmental monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TPT-TPA-HARDWARE-MIB?

TPT-TPA-HARDWARE-MIB is a Trend Micro, Inc. MIB (the vendor of record following Trend Micro's acquisition of TippingPoint) that models the hardware inventory and component health of a TPA — a TippingPoint/Trend Micro security appliance — under the shared tpt-tpa-objs module tree. It defines hardware component tables including hw-slotTable (chassis slot inventory), hw-chasTable (chassis-level status), hw-fanTable (fan module presence/speed/status), hw-psTable (power supply presence and status), and hw-pemTable (power entry module status), giving a structured view of the appliance's physical health beyond simple up/down interface state. This is useful for monitoring environmental and hardware-redundancy conditions on the security appliance — failed fans or power supplies, missing chassis components — before they cause a service outage. It depends on the companion TPT-TPAMIBS-MIB module for its OID placement (tpt-tpa-objs, tpt-tpa-eventsV2, tpt-tpa-unkparams) and standard IF-MIB InterfaceIndex for interface correlation. It is deployed on TippingPoint TPA/TPS intrusion prevention appliances now sold under the Trend Micro brand; administrators can download the TPT-TPA-HARDWARE-MIB file to load it into their MIB browser for that purpose.

IPNetwork Monitor allows you to monitor SNMP objects defined in TPT-TPA-HARDWARE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

TippingPoint TPA/TPS intrusion prevention appliances (Trend Micro)

Monitoring Examples

An operator polls hw-fanTable and hw-psTable across all appliance slots to confirm every fan and power supply reports a normal operating status; a power supply entry in hw-psTable reporting a failed or absent state would indicate the appliance is running without power redundancy and needs immediate attention.

What Can Be Monitored

chassis slot inventory
chassis-level hardware status
fan module presence/speed/status
power supply presence and status
power entry module status

Imported Objects

From IF-MIB

InterfaceIndex

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION

From TPT-TPAMIBS-MIB

tpt-tpa-eventsV2
tpt-tpa-objs
tpt-tpa-unkparams

OIDs

OID symbolic	OID numeric	Type	Access	Description
tpt_tpa_hardware_objs	1.3.6.1.4.1.10734.3.3.2.3			Hardware definition of a TPA and its components. Copyright (C) 2016 Trend Micro Incorporated. All Rights Reserved. Trend Micro makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trend Micro shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Trend Micro. The information is provided 'as is' without warranty of any kind and is subject to change without notice. The only warranties for Trend Micro products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Trend Micro shall not be liable for technical or editorial errors or omissions contained herein. TippingPoint(R), the TippingPoint logo, and Digital Vaccine(R) are registered trademarks of Trend Micro. All other company and product names may be trademarks of their respective holders. All rights reserved. This document contains confidential information, trade secrets or both, which are the property of Trend Micro. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Trend Micro or one of its subsidiaries. All other company and product names may be trademarks of their respective holders.
hw_slotTable	1.3.6.1.4.1.10734.3.3.2.3.1		not-accessible	Table of slots/ports on the device.
hw_slotEntry	1.3.6.1.4.1.10734.3.3.2.3.1.1		not-accessible	An entry in the slot/port table. Rows cannot be created or deleted.
U32 slotNumber	1.3.6.1.4.1.10734.3.3.2.3.1.1.1	Unsigned32	read-only	Slot number for this hardware element.
U32 slotPort	1.3.6.1.4.1.10734.3.3.2.3.1.1.2	Unsigned32	read-only	Port number for this hardware element (0 refers to the board).
MAN slotType	1.3.6.1.4.1.10734.3.3.2.3.1.1.3	ManagedElementType	read-only	Type of hardware element corresponding to slot/port.
CON slotCfgType	1.3.6.1.4.1.10734.3.3.2.3.1.1.4	ConfigRedundancy	read-only	The configuration/redundancy of a hardware element.
HAR slotRunState	1.3.6.1.4.1.10734.3.3.2.3.1.1.5	HardwareState	read-only	The high-level hardware state (active, initializing, standby, etc.).
HAR slotQualifier1	1.3.6.1.4.1.10734.3.3.2.3.1.1.6	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR slotQualifier2	1.3.6.1.4.1.10734.3.3.2.3.1.1.7	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR slotQualifier3	1.3.6.1.4.1.10734.3.3.2.3.1.1.8	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR slotQualifier4	1.3.6.1.4.1.10734.3.3.2.3.1.1.9	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
U32 slotStartTime	1.3.6.1.4.1.10734.3.3.2.3.1.1.10	Unsigned32	read-only	The time (seconds) at which this hardware element was powered up.
U32 slotVendorID	1.3.6.1.4.1.10734.3.3.2.3.1.1.11	Unsigned32	read-only	The identifying number of the vendor of this hardware.
U32 slotDeviceID	1.3.6.1.4.1.10734.3.3.2.3.1.1.12	Unsigned32	read-only	The PCI bus device ID for this slot.
OCT slotProductID	1.3.6.1.4.1.10734.3.3.2.3.1.1.13	OCTET STRING	read-only	Versioning and other inventory information for this hardware element.
U32 slotFPGAVersion	1.3.6.1.4.1.10734.3.3.2.3.1.1.14	Unsigned32	read-only	The version of the TPT FPGA chip on this hardware.
NUM slotInterface	1.3.6.1.4.1.10734.3.3.2.3.1.1.15	InterfaceIndex	read-only	The entry in the IF-MIB interface table that corresponds to this port.
LIN slotLineType	1.3.6.1.4.1.10734.3.3.2.3.1.1.16	LineType	read-only	The line type (e.g., copper or optical) of the port.
DUP slotDuplexState	1.3.6.1.4.1.10734.3.3.2.3.1.1.17	DuplexState	read-only	The current duplex state (full or half) of the port.
U32 slotPhysical	1.3.6.1.4.1.10734.3.3.2.3.1.1.18	Unsigned32	read-only	Physical port number for this hardware element (0 if not a port).
SFP slotSfpQualifier1	1.3.6.1.4.1.10734.3.3.2.3.1.1.19	SfpQualifier	read-only	Type of the SFP transceiver
SFP slotSfpQualifier2	1.3.6.1.4.1.10734.3.3.2.3.1.1.20	SfpQualifier	read-only	Type of the SFP transceiver. This is applicable to the dual speed transceivers, and this variable will have value of the second speed supported by those transceivers. For single-speed transceivers, the value will be not applicable.
hw_chasTable	1.3.6.1.4.1.10734.3.3.2.3.2		not-accessible	Table of chassis data for the device. Represented as a table with one row, and that row is the same as that for other managed elements.
hw_chasEntry	1.3.6.1.4.1.10734.3.3.2.3.2.1		not-accessible	An entry in the chassis table. Rows cannot be created or deleted.
U32 chasNumber	1.3.6.1.4.1.10734.3.3.2.3.2.1.1	Unsigned32	read-only	Number for this entry in the chassis table. Should always be 0.
MAN chasType	1.3.6.1.4.1.10734.3.3.2.3.2.1.3	ManagedElementType	read-only	Type of hardware element -- should always be chassis or unequip.
CON chasCfgType	1.3.6.1.4.1.10734.3.3.2.3.2.1.4	ConfigRedundancy	read-only	The configuration/redundancy of a hardware element.
HAR chasRunState	1.3.6.1.4.1.10734.3.3.2.3.2.1.5	HardwareState	read-only	The high-level hardware state (active, initializing, standby, etc.).
HAR chasQualifier1	1.3.6.1.4.1.10734.3.3.2.3.2.1.6	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR chasQualifier2	1.3.6.1.4.1.10734.3.3.2.3.2.1.7	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR chasQualifier3	1.3.6.1.4.1.10734.3.3.2.3.2.1.8	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR chasQualifier4	1.3.6.1.4.1.10734.3.3.2.3.2.1.9	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
U32 chasStartTime	1.3.6.1.4.1.10734.3.3.2.3.2.1.10	Unsigned32	read-only	The time (seconds) at which the hardware element was powered up.
U32 chasVendorID	1.3.6.1.4.1.10734.3.3.2.3.2.1.11	Unsigned32	read-only	The identifying number of the vendor of this hardware.
U32 chasDeviceID	1.3.6.1.4.1.10734.3.3.2.3.2.1.12	Unsigned32	read-only	An identifying number specific to this device.
OCT chasProductID	1.3.6.1.4.1.10734.3.3.2.3.2.1.13	OCTET STRING	read-only	Versioning and other inventory information for this hardware element.
U32 chasFPGAVersion	1.3.6.1.4.1.10734.3.3.2.3.2.1.14	Unsigned32	read-only	The version of the TPT FPGA chip on this hardware.
hw_fanTable	1.3.6.1.4.1.10734.3.3.2.3.3		not-accessible	Table of fans on the device.
hw_fanEntry	1.3.6.1.4.1.10734.3.3.2.3.3.1		not-accessible	An entry in the fan table. Rows cannot be created or deleted.
U32 fanSubunit	1.3.6.1.4.1.10734.3.3.2.3.3.1.1	Unsigned32	read-only	Number of fan sub-unit (0 for controller).
MAN fanType	1.3.6.1.4.1.10734.3.3.2.3.3.1.3	ManagedElementType	read-only	Type of hardware element -- should always be fan or unequip.
CON fanCfgType	1.3.6.1.4.1.10734.3.3.2.3.3.1.4	ConfigRedundancy	read-only	The configuration/redundancy of a hardware element.
HAR fanRunState	1.3.6.1.4.1.10734.3.3.2.3.3.1.5	HardwareState	read-only	The high-level hardware state (active, initializing, standby, etc.).
HAR fanQualifier1	1.3.6.1.4.1.10734.3.3.2.3.3.1.6	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR fanQualifier2	1.3.6.1.4.1.10734.3.3.2.3.3.1.7	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR fanQualifier3	1.3.6.1.4.1.10734.3.3.2.3.3.1.8	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR fanQualifier4	1.3.6.1.4.1.10734.3.3.2.3.3.1.9	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
U32 fanStartTime	1.3.6.1.4.1.10734.3.3.2.3.3.1.10	Unsigned32	read-only	The time (seconds) at which the hardware element was powered up.
U32 fanVendorID	1.3.6.1.4.1.10734.3.3.2.3.3.1.11	Unsigned32	read-only	The identifying number of the vendor of this hardware.
U32 fanDeviceID	1.3.6.1.4.1.10734.3.3.2.3.3.1.12	Unsigned32	read-only	An identifying number specific to this device.
OCT fanProductID	1.3.6.1.4.1.10734.3.3.2.3.3.1.13	OCTET STRING	read-only	Versioning and other inventory information for this hardware element.
U32 fanFPGAVersion	1.3.6.1.4.1.10734.3.3.2.3.3.1.14	Unsigned32	read-only	The version of the TPT FPGA chip on this hardware.
hw_psTable	1.3.6.1.4.1.10734.3.3.2.3.4		not-accessible	Table of power supplies on the device.
hw_psEntry	1.3.6.1.4.1.10734.3.3.2.3.4.1		not-accessible	An entry in the power supply table. Rows cannot be created or deleted.
U32 psSubunit	1.3.6.1.4.1.10734.3.3.2.3.4.1.1	Unsigned32	read-only	Number of power supply sub-unit (0 for controller).
MAN psType	1.3.6.1.4.1.10734.3.3.2.3.4.1.3	ManagedElementType	read-only	Type of hardware element -- should always be power-supply or unequip.
CON psCfgType	1.3.6.1.4.1.10734.3.3.2.3.4.1.4	ConfigRedundancy	read-only	The configuration/redundancy of a hardware element.
HAR psRunState	1.3.6.1.4.1.10734.3.3.2.3.4.1.5	HardwareState	read-only	The high-level hardware state (active, initializing, standby, etc.).
HAR psQualifier1	1.3.6.1.4.1.10734.3.3.2.3.4.1.6	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR psQualifier2	1.3.6.1.4.1.10734.3.3.2.3.4.1.7	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR psQualifier3	1.3.6.1.4.1.10734.3.3.2.3.4.1.8	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR psQualifier4	1.3.6.1.4.1.10734.3.3.2.3.4.1.9	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
U32 psStartTime	1.3.6.1.4.1.10734.3.3.2.3.4.1.10	Unsigned32	read-only	The time (seconds) at which the hardware element was powered up.
U32 psVendorID	1.3.6.1.4.1.10734.3.3.2.3.4.1.11	Unsigned32	read-only	The identifying number of the vendor of this hardware.
U32 psDeviceID	1.3.6.1.4.1.10734.3.3.2.3.4.1.12	Unsigned32	read-only	An identifying number specific to this device.
OCT psProductID	1.3.6.1.4.1.10734.3.3.2.3.4.1.13	OCTET STRING	read-only	Versioning and other inventory information for this hardware element.
U32 psFPGAVersion	1.3.6.1.4.1.10734.3.3.2.3.4.1.14	Unsigned32	read-only	The version of the TPT FPGA chip on this hardware.
hw_pemTable	1.3.6.1.4.1.10734.3.3.2.3.5		not-accessible	Table of power entry modules on the device.
hw_pemEntry	1.3.6.1.4.1.10734.3.3.2.3.5.1		not-accessible	An entry in the power supply table. Rows cannot be created or deleted.
U32 pemSubunit	1.3.6.1.4.1.10734.3.3.2.3.5.1.1	Unsigned32	read-only	Number of power entry module sub-unit (0 for controller).
MAN pemType	1.3.6.1.4.1.10734.3.3.2.3.5.1.3	ManagedElementType	read-only	Type of hardware element -- should always be pem or unequip.
CON pemCfgType	1.3.6.1.4.1.10734.3.3.2.3.5.1.4	ConfigRedundancy	read-only	The configuration/redundancy of a hardware element.
HAR pemRunState	1.3.6.1.4.1.10734.3.3.2.3.5.1.5	HardwareState	read-only	The high-level hardware state (active, initializing, standby, etc.).
HAR pemQualifier1	1.3.6.1.4.1.10734.3.3.2.3.5.1.6	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR pemQualifier2	1.3.6.1.4.1.10734.3.3.2.3.5.1.7	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR pemQualifier3	1.3.6.1.4.1.10734.3.3.2.3.5.1.8	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
HAR pemQualifier4	1.3.6.1.4.1.10734.3.3.2.3.5.1.9	HardwareStateQual	read-only	Further qualification/detail on the high-level hardware state.
U32 pemStartTime	1.3.6.1.4.1.10734.3.3.2.3.5.1.10	Unsigned32	read-only	The time (seconds) at which the hardware element was powered up.
U32 pemVendorID	1.3.6.1.4.1.10734.3.3.2.3.5.1.11	Unsigned32	read-only	The identifying number of the vendor of this hardware.
U32 pemDeviceID	1.3.6.1.4.1.10734.3.3.2.3.5.1.12	Unsigned32	read-only	An identifying number specific to this device.
OCT pemProductID	1.3.6.1.4.1.10734.3.3.2.3.5.1.13	OCTET STRING	read-only	Versioning and other inventory information for this hardware element.
U32 pemFPGAVersion	1.3.6.1.4.1.10734.3.3.2.3.5.1.14	Unsigned32	read-only	The version of the TPT FPGA chip on this hardware.
U32 hw_numSlots	1.3.6.1.4.1.10734.3.3.2.3.6	Unsigned32	read-only	The number of slots for this device.
U32 hw_numFans	1.3.6.1.4.1.10734.3.3.2.3.7	Unsigned32	read-only	The number of fan subunits for this device.
U32 hw_numPowerSupplies	1.3.6.1.4.1.10734.3.3.2.3.8	Unsigned32	read-only	The number of power supply subunits for this device.
U32 hw_numPEMs	1.3.6.1.4.1.10734.3.3.2.3.9	Unsigned32	read-only	The number of PEM subunits for this device.
OCT hw_certificateNumber	1.3.6.1.4.1.10734.3.3.2.3.10	OCTET STRING	read-only	The hardware certficate number of the device.
OCT hw_serialNumber	1.3.6.1.4.1.10734.3.3.2.3.11	OCTET STRING	read-only	The hardware serial number of the device.
NTF tptHardwareNotify	1.3.6.1.4.1.10734.3.3.3.0.7			Notification: Used to inform the management station of changes in hardware state on the device.
OCT tptHardwareNotifyDeviceID	1.3.6.1.4.1.10734.3.3.3.1.1	OCTET STRING	read-only	The unique identifier of the device sending this notification.
EXT tptHardwareNotifySlot	1.3.6.1.4.1.10734.3.3.3.1.2	ExtendedSlot	read-only	The slot of the hardware whose state has changed. If the hardware element is not a board, this value identifies it as a chassis, fan, power supply, PEM, etc.
U32 tptHardwareNotifyPort	1.3.6.1.4.1.10734.3.3.3.1.3	Unsigned32	read-only	The port or sub-unit number of the hardware whose state has changed. Zero for a board, chassis, fan controller, power supply, or power entry module.
MAN tptHardwareNotifyMeType	1.3.6.1.4.1.10734.3.3.3.1.4	ManagedElementType	read-only	The type of the managed element (e.g., backplane, controller, power supply, fan, etc.) whose state has changed.
CON tptHardwareNotifyCfgType	1.3.6.1.4.1.10734.3.3.3.1.5	ConfigRedundancy	read-only	The configuration/redundancy of the hardware whose state has changed.
HAR tptHardwareNotifyHlState	1.3.6.1.4.1.10734.3.3.3.1.6	HardwareState	read-only	The high-level hardware state (active, initializing, standby, etc.).
HAR tptHardwareNotifyHlStateQual	1.3.6.1.4.1.10734.3.3.3.1.7	HardwareStateQual	read-only	Further qualification/detail on the high-level state.

RFC description

Trend Micro TPA threat appliance hardware component definitions for management and monitoring of device elements.

Start monitoring TippingPoint TPA/TPS intrusion prevention appliances (Trend Micro) (chassis slot/fan/power-supply health status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TPT-TPA-HARDWARE-MIB

What Is TPT-TPA-HARDWARE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description