TPT-NGFW-CLUSTER-MIB

All MIBs › TPT-NGFW-CLUSTER-MIB

Organization: Trend Micro, Inc.

Last Updated: 2016-05-25

Category: Firewall and Intrusion Prevention

Description: Manages Trend Micro TippingPoint NGFW cluster member synchronization and failover configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TPT-NGFW-CLUSTER-MIB?

TPT-NGFW-CLUSTER-MIB is a Trend Micro (TippingPoint) enterprise MIB that manages cluster and high-availability state for TippingPoint Next-Generation Firewall (NGFW) devices. It defines tptNgfwClusterMemberStatusTable for per-member cluster status and role (active/passive), tptNgfwClusterHaFgTable and tptNgfwClusterHaFgMemberTable for fail-over group membership, and tptNgfwClusterHaFeatSyncTable / tptNgfwClusterHaFeatSyncStatusTable for tracking feature-state synchronization across HA group nodes, alongside a rich set of NOTIFICATION-TYPE traps covering member join/leave/reject events, HA state-sync message loss or queue-full conditions, cluster health changes, fail-over-group state changes, cluster-member (CMP) state changes, and configuration consistency-check failures. This gives operators the ability to confirm cluster membership integrity, verify that HA state synchronization is keeping pace across nodes, and get proactive alerts when a member is rejected or a fail-over group changes state — essential for maintaining consistent firewall policy enforcement and failover readiness across an NGFW cluster. It depends on TPT-NGFW-REG-MIB and TPT-PORT-CONFIG-MIB for shared types (Severity, DuplexSetting, LineSpeed) and TPT-NGFW-SYSTEM-INFO-MIB for the device serial reference, and is deployed on TippingPoint NGFW appliances operating together as a cluster with fail-over groups. Security teams operating TippingPoint NGFW clusters typically keep a TPT-NGFW-CLUSTER-MIB download on hand for HA sync monitoring.

IPNetwork Monitor allows you to monitor SNMP objects defined in TPT-NGFW-CLUSTER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Trend Micro TippingPoint Next-Generation Firewall (NGFW) appliances

Monitoring Examples

An operator polls tptNgfwClusterMemberStatusTable to confirm all expected members show an active cluster role, and watches for tptNgfwClusterHaStateSyncQueueFullNotify traps from tptNgfwClusterHaFeatSyncStatusTable; a queue-full notification paired with a member showing a degraded HA feature-sync status would indicate that node's state is falling out of sync with its fail-over group, risking an inconsistent failover.

What Can Be Monitored

cluster member status and role
fail-over group membership and state
HA feature-state synchronization status
member join/leave/reject notifications
HA sync message-loss and queue-full notifications
cluster and fail-over-group health-change notifications

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress
TEXTUAL-CONVENTION
TruthValue

From TPT-NGFW-REG-MIB

Severity
tpt-ngfw-compls
tpt-ngfw-eventsV2
tpt-ngfw-groups
tpt-ngfw-objs
tpt-ngfw-params
tptNgfwNotifySeverity	OBJECT-TYPE

From TPT-NGFW-SYSTEM-INFO-MIB

tptNgfwSystemSerial

OBJECT-TYPE

From TPT-PORT-CONFIG-MIB

AutoNegotiation
DuplexSetting
LineSpeed

How to Use in IPNetwork Monitor

Example using tptNgfwClusterHaFeatSyncStatusTotalEntries OID:

Select a Trend Micro TippingPoint NGFW appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tptNgfwClusterHaFeatSyncStatusTotalEntries into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total number of entries for the feature. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
tptNgfwClusterGroup	1.3.6.1.4.1.10734.3.9.1.1.2			Compliance group for general cluster information and membership table. This group is mandatory.
tptNgfwClusterTrafficGroup	1.3.6.1.4.1.10734.3.9.1.1.3			Compliance group for TippingPoint Cluster Traffic configuration information. This group is mandatory.
tptNgfwClusterHaGroup	1.3.6.1.4.1.10734.3.9.1.1.4			Compliance group for HA related configuration. This group is mandatory.
tptNgfwClusterNotificationGroup	1.3.6.1.4.1.10734.3.9.1.1.5			A group of notifications related to cluster configuration, status and health.
tptNgfwClusterCfgCompl	1.3.6.1.4.1.10734.3.9.1.2.2			Compliance group for NGFW cluster MIB.
tptNgfwCluster	1.3.6.1.4.1.10734.3.9.2.2			This MIB defines TippingPoint Next-Generation Firewall Cluster and HA management information. Cluster information includes details on configuration, cluster membership, device's role (active/passive) in a cluster as well as overall health and status for monitoring purposes. High-availability information provides details on the device's membership in Fail-over Groups and the status of feature state synchronization across nodes in the group and cluster. Copyright (C) 2016 Trend Micro Incorporated. All Rights Reserved. Trend Micro makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trend Micro shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Trend Micro. The information is provided 'as is' without warranty of any kind and is subject to change without notice. The only warranties for Trend Micro products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Trend Micro shall not be liable for technical or editorial errors or omissions contained herein. TippingPoint(R), the TippingPoint logo, and Digital Vaccine(R) are registered trademarks of Trend Micro. All other company and product names may be trademarks of their respective holders. All rights reserved. This document contains confidential information, trade secrets or both, which are the property of Trend Micro. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Trend Micro or one of its subsidiaries. All other company and product names may be trademarks of their respective holders.
STR tptNgfwClusterName	1.3.6.1.4.1.10734.3.9.2.2.1	SnmpAdminString	read-only	The cluster's unique name.
T/F tptNgfwClusterEnabled	1.3.6.1.4.1.10734.3.9.2.2.2	TruthValue	read-only	Indicates if cluster feature support is enabled.
U32 tptNgfwClusterMemberId	1.3.6.1.4.1.10734.3.9.2.2.3	Unsigned32	read-only	This is the cluster member's unique device ID.
STR tptNgfwClusterMemberName	1.3.6.1.4.1.10734.3.9.2.2.4	SnmpAdminString	read-only	The cluster member's name.
T/F tptNgfwClusterStandby	1.3.6.1.4.1.10734.3.9.2.2.5	TruthValue	read-only	Is the device in a standby state and not active in the cluster.
T/F tptNgfwClusterSwConstChecks	1.3.6.1.4.1.10734.3.9.2.2.6	TruthValue	read-only	Are software consistency checks enabled.
T/F tptNgfwClusterHwConstChecks	1.3.6.1.4.1.10734.3.9.2.2.7	TruthValue	read-only	Are hardware consistency checks enabled.
T/F tptNgfwClusterCfgConstChecks	1.3.6.1.4.1.10734.3.9.2.2.8	TruthValue	read-only	Are configuration consistency checks enabled.
tptNgfwClusterMemberStatusTable	1.3.6.1.4.1.10734.3.9.2.2.9		not-accessible	A table providing summary information about each cluster member's configuration, status, and health.
tptNgfwClusterMemberStatusTableEntry	1.3.6.1.4.1.10734.3.9.2.2.9.1		not-accessible	A table entry containing information for each cluster member.
U32 tptNgfwClusterMemberStatusId	1.3.6.1.4.1.10734.3.9.2.2.9.1.1	Unsigned32	not-accessible	The unique cluster member ID.
STR tptNgfwClusterMemberStatusName	1.3.6.1.4.1.10734.3.9.2.2.9.1.2	SnmpAdminString	read-only	The cluster member's name.
STR tptNgfwClusterMemberStatusSerialNo	1.3.6.1.4.1.10734.3.9.2.2.9.1.3	SnmpAdminString	read-only	The cluster member's serial number.
STR tptNgfwClusterMemberStatusHwModel	1.3.6.1.4.1.10734.3.9.2.2.9.1.4	SnmpAdminString	read-only	The members hardware model number.
STR tptNgfwClusterMemberStatusSwVersion	1.3.6.1.4.1.10734.3.9.2.2.9.1.5	SnmpAdminString	read-only	The member's currently running software version.
TIK tptNgfwClusterMemberStatusUptime	1.3.6.1.4.1.10734.3.9.2.2.9.1.6	TimeTicks	read-only	The time (in 100th/second) since the system was powered on.
DAT tptNgfwClusterMemberStatusJoinTime	1.3.6.1.4.1.10734.3.9.2.2.9.1.7	DateAndTime	read-only	The date and time when the device joined the cluster.
T/F tptNgfwClusterMemberStatusSmsManaged	1.3.6.1.4.1.10734.3.9.2.2.9.1.8	TruthValue	read-only	Indicates if the cluster member is managed by SMS.
CFG tptNgfwClusterMemberStatusCfgControl	1.3.6.1.4.1.10734.3.9.2.2.9.1.9	CfgControl	read-only	Reports how the device's configuration is managed.
SYN tptNgfwClusterMemberStatusCfgStateSync	1.3.6.1.4.1.10734.3.9.2.2.9.1.10	SyncState	read-only	The system wide configuration synchronization state.
T/F tptNgfwClusterMemberStatusEnabled	1.3.6.1.4.1.10734.3.9.2.2.9.1.11	TruthValue	read-only	Is clustering enabled on the member device.
HAS tptNgfwClusterMemberStatusHaState	1.3.6.1.4.1.10734.3.9.2.2.9.1.12	HaState	read-only	The state of high-availability features.
HEA tptNgfwClusterMemberStatusHealthState	1.3.6.1.4.1.10734.3.9.2.2.9.1.13	HealthState	read-only	The overall health of a member in the cluster.
U32 tptNgfwClusterMemberStatusHealthScore	1.3.6.1.4.1.10734.3.9.2.2.9.1.14	Unsigned32	read-only	The numeric health score indicating the members health.
T/F tptNgfwClusterMemberStatusMaster	1.3.6.1.4.1.10734.3.9.2.2.9.1.15	TruthValue	read-only	Is the member the master node for the cluster's fail-over group.
tptNgfwClusterTraffic	1.3.6.1.4.1.10734.3.9.2.2.10
IPt tptNgfwClusterTctIpAddrType	1.3.6.1.4.1.10734.3.9.2.2.10.1	InetAddressType	read-only	The type of IP address used for cluster traffic.
IP tptNgfwClusterTctIpAddr	1.3.6.1.4.1.10734.3.9.2.2.10.2	InetAddress	read-only	The IPv4 address used for cluster traffic.
IPt tptNgfwClusterTctMulticastAddrType	1.3.6.1.4.1.10734.3.9.2.2.10.3	InetAddressType	read-only	The HA port multicast address type.
IP tptNgfwClusterTctMulticastAddr	1.3.6.1.4.1.10734.3.9.2.2.10.4	InetAddress	read-only	The IPv4 multicast address used for cluster traffic.
U32 tptNgfwClusterTctPort	1.3.6.1.4.1.10734.3.9.2.2.10.5	Unsigned32	read-only	The port used for cluster traffic.
U32 tptNgfwClusterTctTtl	1.3.6.1.4.1.10734.3.9.2.2.10.6	Unsigned32	read-only	The time-to-live (TTL) setting for cluster traffic.
U32 tptNgfwClusterTctMtu	1.3.6.1.4.1.10734.3.9.2.2.10.7	Unsigned32	read-only	IP MTU value for cluster traffic.
U32 tptNgfwClusterTctTimeout	1.3.6.1.4.1.10734.3.9.2.2.10.8	Unsigned32	read-only	Timeout in seconds for cluster traffic.
U32 tptNgfwClusterTctRetries	1.3.6.1.4.1.10734.3.9.2.2.10.9	Unsigned32	read-only	The number retry attempts made for cluster traffic.
LIN tptNgfwClusterTctPortSpeed	1.3.6.1.4.1.10734.3.9.2.2.10.10	LineSpeed	read-only	The HA port line speed.
DUP tptNgfwClusterTctPortDuplex	1.3.6.1.4.1.10734.3.9.2.2.10.11	DuplexSetting	read-only	The current duplex state of the HA port.
AUT tptNgfwClusterTctPortAutoNeg	1.3.6.1.4.1.10734.3.9.2.2.10.12	AutoNegotiation	read-only	Is flow control on, off,or auto-negotiated for the HA port.
LIN tptNgfwClusterTctLinkState	1.3.6.1.4.1.10734.3.9.2.2.10.13	LinkState	read-only	Is the HA link up, or down.
T/F tptNgfwClusterTctEncryptionEnabled	1.3.6.1.4.1.10734.3.9.2.2.10.14	TruthValue	read-only	Is cluster traffic encrypted.
tptNgfwClusterHa	1.3.6.1.4.1.10734.3.9.2.2.11
T/F tptNgfwClusterHaEnabled	1.3.6.1.4.1.10734.3.9.2.2.11.1	TruthValue	read-only	Is the High-availability feature turned on.
T/F tptNgfwClusterHaGlobalStateSyncEnabled	1.3.6.1.4.1.10734.3.9.2.2.11.2	TruthValue	read-only	Is feature state synchronization globally enabled. This overrides the configuration for each individual feature.
HAS tptNgfwClusterHaMode	1.3.6.1.4.1.10734.3.9.2.2.11.3	HaState	read-only	what mode is the HA feature running in.
tptNgfwClusterHaFeatSyncTable	1.3.6.1.4.1.10734.3.9.2.2.11.4		not-accessible	A table containing configuration information for each feature that support state synchronization.
tptNgfwClusterHaFeatSyncTableEntry	1.3.6.1.4.1.10734.3.9.2.2.11.4.1		not-accessible	A entry for each feature that supports state synchronization.
STR tptNgfwClusterHaFeatSyncFeature	1.3.6.1.4.1.10734.3.9.2.2.11.4.1.1	SnmpAdminString	not-accessible	The HA feature name.
T/F tptNgfwClusterHaFeatSyncEnabled	1.3.6.1.4.1.10734.3.9.2.2.11.4.1.2	TruthValue	read-only	Is the HA feature have state synchronization turned on.
SEV tptNgfwClusterHaFeatSyncLogSeverity	1.3.6.1.4.1.10734.3.9.2.2.11.4.1.3	Severity	read-only	What is the logging level for the feature state synchronization.
tptNgfwClusterHaFgTable	1.3.6.1.4.1.10734.3.9.2.2.11.5		not-accessible	A table of fail-over groups within a cluster configuration.
tptNgfwClusterHaFgEntry	1.3.6.1.4.1.10734.3.9.2.2.11.5.1		not-accessible	An entry for a fail-over group in a cluster.
U32 tptNgfwClusterHaFgIndex	1.3.6.1.4.1.10734.3.9.2.2.11.5.1.1	Unsigned32	not-accessible	The fail-over group index.
U32 tptNgfwClusterHaFgId	1.3.6.1.4.1.10734.3.9.2.2.11.5.1.2	Unsigned32	read-only	The fail-over group ID.
STR tptNgfwClusterHaFgName	1.3.6.1.4.1.10734.3.9.2.2.11.5.1.3	SnmpAdminString	read-only	The fail-over group name.
MAC tptNgfwClusterHaFgBaseMac	1.3.6.1.4.1.10734.3.9.2.2.11.5.1.4	MacAddress	read-only	The base MAC address for the fail-ver group.
FAI tptNgfwClusterHaFgMode	1.3.6.1.4.1.10734.3.9.2.2.11.5.1.5	FailoverGrpMode	read-only	The operational mode of the fail-over group.
tptNgfwClusterHaFgMemberTable	1.3.6.1.4.1.10734.3.9.2.2.11.6		not-accessible	A table of fail-over group memberships for this device.
tptNgfwClusterHaFgMemberEntry	1.3.6.1.4.1.10734.3.9.2.2.11.6.1		not-accessible	A entry with a relationship to a fail-over group.
U32 tptNgfwClusterHaFgMemberId	1.3.6.1.4.1.10734.3.9.2.2.11.6.1.1	Unsigned32	read-only	The fail-over group ID this device is a member of.
STR tptNgfwClusterHaFgMemberName	1.3.6.1.4.1.10734.3.9.2.2.11.6.1.2	SnmpAdminString	read-only	The fail-over group name this device is a member of.
tptNgfwClusterHaFeatSyncStatusTable	1.3.6.1.4.1.10734.3.9.2.2.11.7		not-accessible	A table of HA feature state synchronization configuration and state.
tptNgfwClusterHaFeatSyncStatusTableEntry	1.3.6.1.4.1.10734.3.9.2.2.11.7.1		not-accessible	A entry for a HA feature that has state synchronized within a fail-over group.
STR tptNgfwClusterHaFeatSyncStatusFeature	1.3.6.1.4.1.10734.3.9.2.2.11.7.1.1	SnmpAdminString	not-accessible	The name of the feature which support state synchronization.
T/F tptNgfwClusterHaFeatSyncStatusEnabled	1.3.6.1.4.1.10734.3.9.2.2.11.7.1.2	TruthValue	read-only	Is feature state synchronization enabled.
SYN tptNgfwClusterHaFeatSyncStatusSyncState	1.3.6.1.4.1.10734.3.9.2.2.11.7.1.3	SyncState	read-only	The current condition of feature state synchronization.
STR tptNgfwClusterHaFeatSyncStatusSyncStateReason	1.3.6.1.4.1.10734.3.9.2.2.11.7.1.4	SnmpAdminString	read-only	A text description of they current feature state synchronization.
C64 tptNgfwClusterHaFeatSyncStatusTotalEntriesEx	1.3.6.1.4.1.10734.3.9.2.2.11.7.1.5	Counter64	read-only	The total number of entries for the feature.
C64 tptNgfwClusterHaFeatSyncStatusAddEntries	1.3.6.1.4.1.10734.3.9.2.2.11.7.1.6	Counter64	read-only	The number of added entries for the feature.
C64 tptNgfwClusterHaFeatSyncStatusDelEntries	1.3.6.1.4.1.10734.3.9.2.2.11.7.1.7	Counter64	read-only	The number of deleted entries for the feature.
NTF tptNgfwClusterMemberJoinNotify	1.3.6.1.4.1.10734.3.9.3.0.1			A notification indicating that a device has joined a cluster.
NTF tptNgfwClusterMemberLeaveNotify	1.3.6.1.4.1.10734.3.9.3.0.2			A notification indicating that a device has left a cluster.
NTF tptNgfwClusterMemberRejectNotify	1.3.6.1.4.1.10734.3.9.3.0.3			A notification indicating that a device's attempt to join a cluster failed.
NTF tptNgfwClusterHaStateSyncMessageLossNotify	1.3.6.1.4.1.10734.3.9.3.0.4			Feature state synchronization has lost updates with peer.
NTF tptNgfwClusterHaStateSyncQueueFullNotify	1.3.6.1.4.1.10734.3.9.3.0.5			Feature state synchronization Buffers have been filled.
NTF tptNgfwClusterHealthChangeNotify	1.3.6.1.4.1.10734.3.9.3.0.6			A notification indicating how the device's health score has changed.
NTF tptNgfwClusterHaFgStateChangeNotify	1.3.6.1.4.1.10734.3.9.3.0.7			A notification indicating the state of a HA fail-over group has changed to the specified state.
NTF tptNgfwClusterCmpStateChangeNotify	1.3.6.1.4.1.10734.3.9.3.0.8			A notification sent when a component has exceeded a monitored threshold value.
NTF tptNgfwClusterConstChkFailedNotify	1.3.6.1.4.1.10734.3.9.3.0.9			A notification sent if any cluster configuration, software, or hardware consistency check fails.
CLU tptNgfwClusterMemberRejectNotifyReason	1.3.6.1.4.1.10734.3.9.3.1.1	ClusterMemberRejectReason	accessible-for-notify	The reason a device was not accepted into a cluster configuration.
STR tptNgfwClusterHaStateSyncNotifyFeature	1.3.6.1.4.1.10734.3.9.3.1.2	SnmpAdminString	accessible-for-notify	The name of a HA feature.
HEA tptNgfwClusterHealthChangeNotifyState	1.3.6.1.4.1.10734.3.9.3.1.3	HealthState	accessible-for-notify	The device's current state based on a health score.
U32 tptNgfwClusterHealthChangeNotifyScore	1.3.6.1.4.1.10734.3.9.3.1.4	Unsigned32	accessible-for-notify	The current health score between 0-100. The value will be between the upper and lower bounds (inclusive).
U32 tptNgfwClusterHealthChangeNotifyStateUpperLimit	1.3.6.1.4.1.10734.3.9.3.1.5	Unsigned32	accessible-for-notify	The upper bound of health score range.
U32 tptNgfwClusterHealthChangeNotifyStateLowerLimit	1.3.6.1.4.1.10734.3.9.3.1.6	Unsigned32	accessible-for-notify	The lower bound of health score range.
FAI tptNgfwClusterHaFgStateChangeNotifyState	1.3.6.1.4.1.10734.3.9.3.1.7	FailoverGroupState	accessible-for-notify	The current fail-over group state.
U32 tptNgfwClusterHaFgStateChangeNotifyActiveDeviceId	1.3.6.1.4.1.10734.3.9.3.1.8	Unsigned32	accessible-for-notify	The ID of the active device in a fail-over group.
U32 tptNgfwClusterHaFgStateChangeNotifyPassiveDeviceId	1.3.6.1.4.1.10734.3.9.3.1.9	Unsigned32	accessible-for-notify	The ID of the passive device in a fail-over group.
COM tptNgfwClusterCmpStateChangeNotifyType	1.3.6.1.4.1.10734.3.9.3.1.10	ComponentType	accessible-for-notify	The type of component on the device that has exceeded a monitored threshold level.
STR tptNgfwClusterCmpStateChangeNotifyName	1.3.6.1.4.1.10734.3.9.3.1.11	SnmpAdminString	accessible-for-notify	The name of the component on the device that has exceeded a monitored threshold level.
HEA tptNgfwClusterCmpStateChangeNotifyState	1.3.6.1.4.1.10734.3.9.3.1.12	HealthState	accessible-for-notify	The current state of the component.
STR tptNgfwClusterCmpStateChangeNotifyValue	1.3.6.1.4.1.10734.3.9.3.1.13	SnmpAdminString	accessible-for-notify	The current component's measured value.
STR tptNgfwClusterCmpStateChangeNotifyUnits	1.3.6.1.4.1.10734.3.9.3.1.14	SnmpAdminString	accessible-for-notify	The component's units of measure.
STR tptNgfwClusterCmpStateChangeNotifyThreshold	1.3.6.1.4.1.10734.3.9.3.1.15	SnmpAdminString	accessible-for-notify	The threshold value the component has exceeded.
THR tptNgfwClusterCmpStateChangeNotifyLimitType	1.3.6.1.4.1.10734.3.9.3.1.16	ThresholdLimitType	accessible-for-notify	Is the threshold value a upper or lower limit.
THR tptNgfwClusterCmpStateChangeNotifyRelation	1.3.6.1.4.1.10734.3.9.3.1.17	ThresholdRelation	accessible-for-notify	Indicates if the component's current value is above or below the specified threshold value.
CON tptNgfwClusterConstChkFailedNotifyType	1.3.6.1.4.1.10734.3.9.3.1.18	ConsistencyCheckType	accessible-for-notify	The type of consistency check that failed.
MAS tptNgfwClusterConstChkFailedNotifyMaster	1.3.6.1.4.1.10734.3.9.3.1.19	MasterLocation	accessible-for-notify	The location of the master reference.

RFC description

TippingPoint Next-Generation Firewall Cluster MIB for managing cluster membership, device roles, high-availability, and synchronization.

Start monitoring Trend Micro TippingPoint NGFW appliances with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TPT-NGFW-CLUSTER-MIB