TPT-PORT-CONFIG-MIB

All MIBs › TPT-PORT-CONFIG-MIB

Organization: Trend Micro, Inc.

Last Updated: 2016-05-25

Category: Firewall and Intrusion Prevention

Description: Manages TippingPoint IPS network port speed, duplex, VLAN, and segment assignment configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TPT-PORT-CONFIG-MIB?

TPT-PORT-CONFIG-MIB is a Trend Micro TippingPoint proprietary MIB for the TippingPoint Intrusion Prevention System (IPS) family of network security appliances. It exposes configuration data for the physical network ports on the device, organized as a table indexed by slot and port. The primary use is monitoring and managing hardware port state: link speed, duplex mode, auto-negotiation, administrative shutdown status, loopback mode, and failover/bypass behavior (LDS mode and timeout), all of which reflect the operational health of the inline security appliance's network interfaces. Security teams often load the TPT-PORT-CONFIG-MIB MIB into their management console specifically to audit failover/bypass settings across all inline IPS ports. It does not appear to depend heavily on other standard MIBs, being a self-contained vendor configuration module. It is typically deployed by security operations teams managing TippingPoint IPS appliances inline in a network path, where port-level misconfiguration or failover state directly affects traffic flow.

IPNetwork Monitor allows you to monitor SNMP objects defined in TPT-PORT-CONFIG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Trend Micro TippingPoint IPS appliance product line, entire range (per-port link/failover-bypass config status)

Monitoring Examples

An administrator would poll portConfigTable/portConfigEntry, indexed by portConfigSlot and portConfigPort, to check portConfigLineSpeed and portConfigDuplex for mismatches that could cause packet loss on an inline IPS segment. Monitoring portConfigShutdown would reveal if a port was administratively disabled, and portConfigFailover combined with portConfigLDSMode/portConfigLDSTimeout would show whether the appliance's link-down synchronization (bypass) feature has been triggered, indicating the IPS has failed open.

What Can Be Monitored

port line speed
duplex mode
auto-negotiation status
administrative shutdown state
loopback mode
failover/bypass (LDS) mode and timeout

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION

From TPT-TPAMIBS-MIB

tpt-tpa-objs

OIDs

OID symbolic	OID numeric	Type	Access	Description
AUT portConfigAutoNeg	1.3.6.1.4.1.10734.3.3.2.4.1.1.5	AutoNegotiation	read-only	The auto-negotiation configuration setting of this port.
DUP portConfigDuplex	1.3.6.1.4.1.10734.3.3.2.4.1.1.4	DuplexSetting	read-only	The duplex configuration setting of this port.
portConfigEntry	1.3.6.1.4.1.10734.3.3.2.4.1.1		not-accessible	An entry in the slot/port table. Rows cannot be created or deleted.
FAI portConfigFailover	1.3.6.1.4.1.10734.3.3.2.4.1.1.8	FailoverAction	read-only	The failover action (block or permit) configuration setting of this port.
LIN portConfigLDSMode	1.3.6.1.4.1.10734.3.3.2.4.1.1.9	LinkDownMode	read-only	The link-down sync mode (hub, breaker, or wire) setting of this port.
U32 portConfigLDSTimeout	1.3.6.1.4.1.10734.3.3.2.4.1.1.10	Unsigned32	read-only	The link-down sync timeout configuration setting of this port.
LIN portConfigLineSpeed	1.3.6.1.4.1.10734.3.3.2.4.1.1.3	LineSpeed	read-only	The line speed configuration setting of this port.
ENA portConfigLoopback	1.3.6.1.4.1.10734.3.3.2.4.1.1.7	EnabledOrNot	read-only	The loopback (on or off) configuration setting of this port.
U32 portConfigPort	1.3.6.1.4.1.10734.3.3.2.4.1.1.2	Unsigned32	read-only	Port number for this port.
ENA portConfigShutdown	1.3.6.1.4.1.10734.3.3.2.4.1.1.6	EnabledOrNot	read-only	The shutdown configuration setting of this port. Shutdown enabled means that the port is manually removed from service. Shutdown disabled means that the port is free to come up normally.
U32 portConfigSlot	1.3.6.1.4.1.10734.3.3.2.4.1.1.1	Unsigned32	read-only	Slot number for this port.
portConfigTable	1.3.6.1.4.1.10734.3.3.2.4.1		not-accessible	Table of slots/ports on the device and their configuration settings.
tpt_port_config_objs	1.3.6.1.4.1.10734.3.3.2.4			Configurable items of an interface port on the device. Copyright (C) 2016 Trend Micro Incorporated. All Rights Reserved. Trend Micro makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trend Micro shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Trend Micro. The information is provided 'as is' without warranty of any kind and is subject to change without notice. The only warranties for Trend Micro products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Trend Micro shall not be liable for technical or editorial errors or omissions contained herein. TippingPoint(R), the TippingPoint logo, and Digital Vaccine(R) are registered trademarks of Trend Micro. All other company and product names may be trademarks of their respective holders. All rights reserved. This document contains confidential information, trade secrets or both, which are the property of Trend Micro. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Trend Micro or one of its subsidiaries. All other company and product names may be trademarks of their respective holders.

RFC description

Configures and monitors network port settings on Trend Micro TippingPoint intrusion prevention systems.

Start monitoring Trend Micro TippingPoint IPS appliance product line, entire range (per-port link/failover-bypass config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TPT-PORT-CONFIG-MIB

What Is TPT-PORT-CONFIG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description