TPLINK-VRRP-MIB

All MIBs › TPLINK-VRRP-MIB

Organization: TP-LINK

Last Updated: 2012-12-13

Category: IP Routing and Multicast

Description: Manages TP-Link switch VRRP virtual router groups, priority, preemption, and gateway redundancy.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TPLINK-VRRP-MIB?

TPLINK-VRRP-MIB is a TP-LINK proprietary MIB managing VRRP (Virtual Router Redundancy Protocol). Its global-control table, keyed by VRID/VLAN ID, records interface status, interface IP, virtual MAC address, description, primary virtual IP, running/configured priority, advertisement interval, preempt mode, time delay, authentication type/key, state, and status, while a virtual-IP-control table records additional virtual IP addresses per VRRP instance. As a configuration/status MIB it lets an administrator confirm VRRP master/backup state and priority on a TP-LINK router/switch. It is deployed on TP-LINK routing/switching equipment (VRRP). Engineers can download the TPLINK-VRRP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TPLINK-VRRP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

TP-LINK routing/switching equipment (VRRP)

Monitoring Examples

An administrator checks tpVrrpState and tpVrrpRunPriority to confirm which router is VRRP master on a TP-LINK device.

What Can Be Monitored

VRRP master/backup state and priority configuration

Imported Objects

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From TPLINK-MIB

tplinkMgmt

OBJECT-IDENTITY

From TPLINK-TC-MIB

TPRowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
tplinkVrrpMIB	1.3.6.1.4.1.11863.6.65			This MIB describes objects used for managing Virtual Router Redundancy Protocol (VRRP) routers.
tplinkVrrpMIBObjects	1.3.6.1.4.1.11863.6.65.1
tpVrrpGlobalCtrl	1.3.6.1.4.1.11863.6.65.1.1
tpVrrpGlobalCtrlTable	1.3.6.1.4.1.11863.6.65.1.1.1		not-accessible	Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'TpVrrpGlobalCtrlEntry' items.
tpVrrpGlobalCtrlEntry	1.3.6.1.4.1.11863.6.65.1.1.1.1		not-accessible	An entry in the tpVrrpGlobalCtrlTable containing the operational characteristics of a virtual router. On a VRRP router,a given virtual router is identified by a combination of the VID and VRID.Rows in the table can be modified according to the tpVrrpStatus.
INT tpVrrpVrid	1.3.6.1.4.1.11863.6.65.1.1.1.1.1	INTEGER	read-only	This object contains the Virtual Router Identifier (VRID).
INT tpVrrpVid	1.3.6.1.4.1.11863.6.65.1.1.1.1.2	INTEGER	read-only	The interface index
INT tpVrrpIntfStatus	1.3.6.1.4.1.11863.6.65.1.1.1.1.3	INTEGER	read-only	The interface status
IP tpVrrpInterfaceIP	1.3.6.1.4.1.11863.6.65.1.1.1.1.4	IpAddress	read-only	The interface IP address.
OCT tpVrrpMacAddress	1.3.6.1.4.1.11863.6.65.1.1.1.1.5	OCTET STRING	read-only	The virtual MAC address of the virtual router.
OCT tpVrrpDescription	1.3.6.1.4.1.11863.6.65.1.1.1.1.6	OCTET STRING	read-create	The description of the VRRP.
IP tpVrrpPrimaryVirtualIp	1.3.6.1.4.1.11863.6.65.1.1.1.1.7	IpAddress	read-only	This is the IP address listed as the source in VRRP advertisement last received by this virtual router.
INT tpVrrpRunPriority	1.3.6.1.4.1.11863.6.65.1.1.1.1.8	INTEGER	read-only	This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority.A priority of 255 is used for the router that owns the associated IP address(es).
INT tpVrrpConfigPriority	1.3.6.1.4.1.11863.6.65.1.1.1.1.9	INTEGER	read-create	This object operate the priority to be used for the virtual router master election process.
INT tpVrrpAdvertisement	1.3.6.1.4.1.11863.6.65.1.1.1.1.10	INTEGER	read-create	The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements.
INT tpVrrpPreeptMode	1.3.6.1.4.1.11863.6.65.1.1.1.1.11	INTEGER	read-create	Controls whether a higher priority virtual router will preempt a lower priority master
INT tpVrrpTimeDelay	1.3.6.1.4.1.11863.6.65.1.1.1.1.12	INTEGER	read-create	This is object is used to config the delay timer associated with the VRRP.
INT tpVrrpAuthType	1.3.6.1.4.1.11863.6.65.1.1.1.1.13	INTEGER	read-create	Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifindex(Vlan ID).
OCT tpVrrpKey	1.3.6.1.4.1.11863.6.65.1.1.1.1.14	OCTET STRING	read-create	The Authentication Key. This object is set according to the value of the 'tpVrrpAuthType' object ('Simple' or 'MD5').
INT tpVrrpState	1.3.6.1.4.1.11863.6.65.1.1.1.1.15	INTEGER	read-only	The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router.
TPR tpVrrpStatus	1.3.6.1.4.1.11863.6.65.1.1.1.1.16	TPRowStatus	read-create	The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),creat a new entry destroy(6),destory the entry.
tpVrrpVirtualIpCtrl	1.3.6.1.4.1.11863.6.65.1.2
tpVrrpVirtualIpCtrlTable	1.3.6.1.4.1.11863.6.65.1.2.1		not-accessible	The table of addresses associated with this virtual router.
tpVrrpVirtualIpCtrlEntry	1.3.6.1.4.1.11863.6.65.1.2.1.1		not-accessible	An entry in the table contains an IP address that is associated with a virtual router.
INT tpVrrpVirtualIpVrid	1.3.6.1.4.1.11863.6.65.1.2.1.1.1	INTEGER	read-only	This object contains the Virtual Router Identifier (VRID).
INT tpVrrpVirtualIpVid	1.3.6.1.4.1.11863.6.65.1.2.1.1.2	INTEGER	read-only	The interface index
INT tpVrrpVirtualIpintfStatus	1.3.6.1.4.1.11863.6.65.1.2.1.1.3	INTEGER	read-only	The interface status
IP tpVrrpVirtualIpAddress	1.3.6.1.4.1.11863.6.65.1.2.1.1.4	IpAddress	read-only	The virtual IP address associated with a virtual router.
TPR tpVrrpVirtualIpStatus	1.3.6.1.4.1.11863.6.65.1.2.1.1.5	TPRowStatus	read-create	The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),creat a new entry destroy(6),destory the entry.
tpVrrpTrackCtrl	1.3.6.1.4.1.11863.6.65.1.3
tpVrrpTrackCtrlTable	1.3.6.1.4.1.11863.6.65.1.3.1		not-accessible	The table of ifindex tracked by the virtual router.
tpVrrpTrackCtrlEntry	1.3.6.1.4.1.11863.6.65.1.3.1.1		not-accessible	An entry in the table contains the ifindex and reduced priority that is associated with a virtual router.
INT tpVrrpTrackVrid	1.3.6.1.4.1.11863.6.65.1.3.1.1.1	INTEGER	read-only	This object contains the Virtual Router Identifier (VRID).
INT tpVrrpTrackVid	1.3.6.1.4.1.11863.6.65.1.3.1.1.2	INTEGER	read-only	The interface index
INT tpVrrpTrackIntfStatus	1.3.6.1.4.1.11863.6.65.1.3.1.1.3	INTEGER	read-only	The interface status
INT tpVrrpTrackInterface	1.3.6.1.4.1.11863.6.65.1.3.1.1.4	INTEGER	read-only	The ifindex tracked by the virtual router.
INT tpVrrpTrackIntfTrackedStatus	1.3.6.1.4.1.11863.6.65.1.3.1.1.5	INTEGER	read-only	The interface status
INT tpVrrpTrackPriortiy	1.3.6.1.4.1.11863.6.65.1.3.1.1.6	INTEGER	read-create	The object operate the priority of the virtual router when the interface tracked linkdown.
INT tpVrrpLinkState	1.3.6.1.4.1.11863.6.65.1.3.1.1.7	INTEGER	read-only	The object display the status of the interface tracked .
TPR tpVrrpTrackStatus	1.3.6.1.4.1.11863.6.65.1.3.1.1.8	TPRowStatus	read-create	The following values are states: these values may be used as follow: active(1),if the entry is being used. createAndGo(4),creat a new entry destroy(6),destory the entry.
tpVrrpStatistics	1.3.6.1.4.1.11863.6.65.1.4
INT tpVrrpChecksumErrors	1.3.6.1.4.1.11863.6.65.1.4.1	INTEGER	read-only	The total number of VRRP packets received with an invalid VRRP checksum value.
INT tpVrrpVersionErrors	1.3.6.1.4.1.11863.6.65.1.4.2	INTEGER	read-only	The total number of VRRP packets received with an unknown or unsupported version number.
INT tpVrrpVridErrors	1.3.6.1.4.1.11863.6.65.1.4.3	INTEGER	read-only	The total number of VRRP packets received with an invalid VRID for this virtual router.
tpVrrpStatsTable	1.3.6.1.4.1.11863.6.65.1.4.4		not-accessible	Table of virtual router statistics.
tpVrrpStatsEntry	1.3.6.1.4.1.11863.6.65.1.4.4.1		not-accessible	An entry in the table, containing statistics information about a given virtual router.
INT tpVrrpStatsVrid	1.3.6.1.4.1.11863.6.65.1.4.4.1.1	INTEGER	read-only	the VRID of the virtual router. It is used together with interface ID to specify the virtual router to operate statistics.
INT tpVrrpStatsVid	1.3.6.1.4.1.11863.6.65.1.4.4.1.2	INTEGER	read-only	the interface ID of the virtual router. It is used together with VRID to specify the virtual router to operate statistics.
INT tpVrrpStatsIntfStatus	1.3.6.1.4.1.11863.6.65.1.4.4.1.3	INTEGER	read-only	The interface status
INT tpVrrpChecksumErr	1.3.6.1.4.1.11863.6.65.1.4.4.1.4	INTEGER	read-only	The total number of VRRP packets received with an invalid VRRP checksum value by this virtual router.
INT tpVrrpVersionErr	1.3.6.1.4.1.11863.6.65.1.4.4.1.5	INTEGER	read-only	The total number of VRRP packets received with an unknown or unsupported version number by this virtual router.
INT tpVrrpStatsBecomeMaster	1.3.6.1.4.1.11863.6.65.1.4.4.1.6	INTEGER	read-only	The total number of times that this virtual router's state has transitioned to MASTER.
INT tpvrrpStatsAdvertiseRcvd	1.3.6.1.4.1.11863.6.65.1.4.4.1.7	INTEGER	read-only	The total number of VRRP advertisements received by this virtual router.
INT tpvrrpStatsAdvertiseSent	1.3.6.1.4.1.11863.6.65.1.4.4.1.8	INTEGER	read-only	The total number of VRRP advertisements sent by this virtual router.
INT tpvrrpStatsAdvertiseIntervalErrors	1.3.6.1.4.1.11863.6.65.1.4.4.1.9	INTEGER	read-only	The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router.
INT tpvrrpStatsAuthFailures	1.3.6.1.4.1.11863.6.65.1.4.4.1.10	INTEGER	read-only	The total number of VRRP packets received that do not pass the authentication check.
INT tpvrrpStatsIpTtlErrors	1.3.6.1.4.1.11863.6.65.1.4.4.1.11	INTEGER	read-only	The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255.
INT tpvrrpStatsPriorityZeroPktsRcvd	1.3.6.1.4.1.11863.6.65.1.4.4.1.12	INTEGER	read-only	The total number of VRRP packets received by the virtual router with a priority of '0'.
INT tpvrrpStatsPriorityZeroPktsSent	1.3.6.1.4.1.11863.6.65.1.4.4.1.13	INTEGER	read-only	The total number of VRRP packets sent by the virtual router with a priority of '0'.
INT tpvrrpStatsInvalidTypePktsRcvd	1.3.6.1.4.1.11863.6.65.1.4.4.1.14	INTEGER	read-only	The number of VRRP packets received by the virtual router with an invalid value in the 'type' field.
INT tpvrrpStatsAddressListErrors	1.3.6.1.4.1.11863.6.65.1.4.4.1.15	INTEGER	read-only	The total number of packets received for which the address list does not match the locally configured list for the virtual router.
INT tpvrrpStatsInvalidAuthType	1.3.6.1.4.1.11863.6.65.1.4.4.1.16	INTEGER	read-only	The total number of packets received with an unknown authentication type.
INT tpvrrpStatsAuthTypeMismatch	1.3.6.1.4.1.11863.6.65.1.4.4.1.17	INTEGER	read-only	The total number of packets received with 'Auth Type' not equal to the locally configured authentication method (`vrrpOperAuthType').
INT tpvrrpStatsPacketLengthErrors	1.3.6.1.4.1.11863.6.65.1.4.4.1.18	INTEGER	read-only	The total number of packets received with a packet length less than the length of the VRRP header.
INT tpvrrpStatsClear	1.3.6.1.4.1.11863.6.65.1.4.5	INTEGER	read-write	The following values are states: these values may be used as follow: active(1),if the entry is being used. clear(0),set the entry to 0.
tplinkVrrpNotifications	1.3.6.1.4.1.11863.6.65.2

RFC description

Virtual Router Redundancy Protocol (VRRP) configuration and management for TP-Link devices.

Start monitoring TP-LINK routing/switching equipment, VRRP (master/backup state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TPLINK-VRRP-MIB

What Is TPLINK-VRRP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description